# Проброс rs-485 в ethernet

**URL:** <https://support.wirenboard.com/t/probros-rs-485-v-ethernet/31190>\
**Category:** Без категории\
**Created:** [October 30, 2025, 12:41pm UTC](https://support.wirenboard.com/t/probros-rs-485-v-ethernet/31190 "2025-10-30T12:41:05Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pawe](https://avatars.discourse-cdn.com/v2/letter/p/7ab992/32.png) [@Pawe](https://support.wirenboard.com/u/Pawe)\
**Post date:** [October 30, 2025, 12:41pm UTC](https://support.wirenboard.com/t/probros-rs-485-v-ethernet/31190/1 "2025-10-30T12:41:05Z")

</div>

Возможно ли информацию от тепловычислителя КМ-5-2 использующую связь rs-485(не modbus) сделать проброс на tcp\_ip.  
Данный тепловычислитель общается по своему протоколу по аналогии счётчиков Меркурий.

---

<div class="post-metadata">

**Author:** ![BrainRoot](https://avatars.discourse-cdn.com/v2/letter/b/c2a13f/32.png) [@BrainRoot](https://support.wirenboard.com/u/BrainRoot)\
**Post date:** [October 30, 2025, 12:42pm UTC](https://support.wirenboard.com/t/probros-rs-485-v-ethernet/31190/2 "2025-10-30T12:42:02Z")

</div>

Добрый день.  
Да, например используя шлюз [Преобразователь интерфейсов WB-MGE v.2 — Wiren Board](https://wiki.wirenboard.com/wiki/WB-MGE_v.2_Modbus-Ethernet_Interface_Converter) в режиме “modbus over TCP”.

---

<div class="post-metadata">

**Author:** ![Pawe](https://avatars.discourse-cdn.com/v2/letter/p/7ab992/32.png) [@Pawe](https://support.wirenboard.com/u/Pawe)\
**Post date:** [October 30, 2025, 1:19pm UTC](https://support.wirenboard.com/t/probros-rs-485-v-ethernet/31190/4 "2025-10-30T13:19:34Z")

</div>

Как написано в данном преобразователе, он преобразует modbus RTU. в нашем случае там не modbus

---

<div class="post-metadata">

**Author:** ![BrainRoot](https://avatars.discourse-cdn.com/v2/letter/b/c2a13f/32.png) [@BrainRoot](https://support.wirenboard.com/u/BrainRoot)\
**Post date:** [October 30, 2025, 1:43pm UTC](https://support.wirenboard.com/t/probros-rs-485-v-ethernet/31190/5 "2025-10-30T13:43:20Z")

</div>

В случае режима “over TCP” - любой мастер-слейв протокол.