# Пропала большая часть устройств

**URL:** <https://support.wirenboard.com/t/propala-bolshaya-chast-ustrojstv/11105>\
**Category:** Wiren Board 6\
**Created:** [April 28, 2022, 10:34am UTC](https://support.wirenboard.com/t/propala-bolshaya-chast-ustrojstv/11105 "2022-04-28T10:34:29Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![aborichev](https://avatars.discourse-cdn.com/v2/letter/a/bc8723/32.png) [@aborichev](https://support.wirenboard.com/u/aborichev)\
**Post date:** [April 28, 2022, 10:34am UTC](https://support.wirenboard.com/t/propala-bolshaya-chast-ustrojstv/11105/1 "2022-04-28T10:34:29Z")

</div>

Добрый день. Что было: WB 6.7, с ноября без проблем работал. Были подключены 1wire, датчики MSW3, релешки в виде модулей и по modbus, Счетчик электричесства.

Стал я в MOD1 вставлять модуль для котлов с EBUS, запустил устройство, а половина былых устройств не видится и пропала из раздела “устройства”. В том числе, “discrete io”, все устройства по modbus, релешки (wbio-do-ssr-8). Видны и обновляются только базовые параметры самого wb6 и датчики по 1wire.  
На контактах разъемов +5v modbus порядка 100 мВ.

Подскажите пожалуйста, куда копать или сразу высылать в ремонт?

 ![image](https://support.wirenboard.com/uploads/default/original/2X/f/f065f8b750944ed1e7e8abd9a0051bcd56c88ec9.png)

---

<div class="post-metadata">

**Author:** ![BrainRoot](https://avatars.discourse-cdn.com/v2/letter/b/c2a13f/32.png) [@BrainRoot](https://support.wirenboard.com/u/BrainRoot)\
**Post date:** [April 28, 2022, 10:45am UTC](https://support.wirenboard.com/t/propala-bolshaya-chast-ustrojstv/11105/2 "2022-04-28T10:45:56Z")

</div>

Добрый день.  
А работают ли сервисы wb-mqtt-serial, wb-mqtt-gpio?

---

<div class="post-metadata">

**Author:** ![aborichev](https://avatars.discourse-cdn.com/v2/letter/a/bc8723/32.png) [@aborichev](https://support.wirenboard.com/u/aborichev)\
**Post date:** [April 28, 2022, 11:34am UTC](https://support.wirenboard.com/t/propala-bolshaya-chast-ustrojstv/11105/4 "2022-04-28T11:34:53Z")

</div>

31752 ? Ss 0:00 /bin/bash /usr/lib/wb-mqtt-gpio/generate-system-config.sh  
32432 ? S 0:00 \_ /bin/bash /usr/lib/wb-mqtt-gpio/generate-system-config.sh  
2982 ? Ssl 0:18 /usr/bin/wb-mqtt-serial

Видимо, работают.

---

<div class="post-metadata">

**Author:** ![aborichev](https://avatars.discourse-cdn.com/v2/letter/a/bc8723/32.png) [@aborichev](https://support.wirenboard.com/u/aborichev)\
**Post date:** [April 28, 2022, 11:37am UTC](https://support.wirenboard.com/t/propala-bolshaya-chast-ustrojstv/11105/5 "2022-04-28T11:37:00Z")

</div>

И в логах регулярно:

```auto
Apr 28 14:24:16 wirenboard-AUUUWP4R wb-mqtt-gpio[19591]: INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps
Apr 28 14:24:16 wirenboard-AUUUWP4R wb-mqtt-gpio[19591]: WARNING: [config] Can't override "/channels[name='MOD2_K1']/gpio", it is protected from modification
Apr 28 14:24:16 wirenboard-AUUUWP4R wb-mqtt-gpio[19591]: WARNING: [config] Can't override "/channels[name='MOD2_K2']/gpio", it is protected from modification
Apr 28 14:24:16 wirenboard-AUUUWP4R wb-mqtt-gpio[19591]: WARNING: [config] Can't override "/channels[name='EXT1_K1']/gpio", it is protected from modification
Apr 28 14:24:16 wirenboard-AUUUWP4R wb-mqtt-gpio[19591]: WARNING: [config] Can't override "/channels[name='EXT1_K2']/gpio", it is protected from modification
Apr 28 14:24:16 wirenboard-AUUUWP4R wb-mqtt-gpio[19591]: WARNING: [config] Can't override "/channels[name='EXT1_K3']/gpio", it is protected from modification
Apr 28 14:24:16 wirenboard-AUUUWP4R wb-mqtt-gpio[19591]: WARNING: [config] Can't override "/channels[name='EXT1_K4']/gpio", it is protected from modification
Apr 28 14:24:16 wirenboard-AUUUWP4R wb-mqtt-gpio[19591]: WARNING: [config] Can't override "/channels[name='EXT1_K5']/gpio", it is protected from modification
Apr 28 14:24:16 wirenboard-AUUUWP4R wb-mqtt-gpio[19591]: WARNING: [config] Can't override "/channels[name='EXT1_K6']/gpio", it is protected from modification
Apr 28 14:24:16 wirenboard-AUUUWP4R wb-mqtt-gpio[19591]: WARNING: [config] Can't override "/channels[name='EXT1_K7']/gpio", it is protected from modification
Apr 28 14:24:16 wirenboard-AUUUWP4R wb-mqtt-gpio[19591]: WARNING: [config] Can't override "/channels[name='EXT1_K8']/gpio", it is protected from modification
Apr 28 14:24:16 wirenboard-AUUUWP4R wb-mqtt-gpio[19591]: ERROR: [gpio] FATAL: duplicate GPIO offset in config: '0' at chip '/dev/gpiochip' defined as 'EXT2_K1'. It is already defined as 'EXT1_K1'. To override set similar MQTT id (name). @ config.cpp:47
Apr 28 14:24:16 wirenboard-AUUUWP4R wb-mqtt-gpio[19591]: terminate called without an active exception
Apr 28 14:24:16 wirenboard-AUUUWP4R systemd[1]: wb-mqtt-gpio.service: Main process exited, code=killed, status=6/ABRT
Apr 28 14:24:16 wirenboard-AUUUWP4R systemd[1]: wb-mqtt-gpio.service: Unit entered failed state.
Apr 28 14:24:16 wirenboard-AUUUWP4R systemd[1]: wb-mqtt-gpio.service: Failed with result 'signal'.
Apr 28 14:24:17 wirenboard-AUUUWP4R wb-mqtt-confed[993]: INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-gpio.schema.json
Apr 28 14:24:17 wirenboard-AUUUWP4R systemd[1]: wb-mqtt-gpio.service: Service hold-off time over, scheduling restart.

```

---

<div class="post-metadata">

**Author:** ![BrainRoot](https://avatars.discourse-cdn.com/v2/letter/b/c2a13f/32.png) [@BrainRoot](https://support.wirenboard.com/u/BrainRoot)\
**Post date:** [April 28, 2022, 11:55am UTC](https://support.wirenboard.com/t/propala-bolshaya-chast-ustrojstv/11105/6 "2022-04-28T11:55:49Z")

</div>

> [@aborichev](#):
>
> Видимо, работают.

Статус покажите, процессы генерации конфигов не должны существовать больше пары секунд.

> [@aborichev](#):
>
> ```auto
> Apr 28 14:24:16 wirenboard-AUUUWP4R wb-mqtt-gpio[19591]: ERROR: [gpio] FATAL: duplicate GPIO offset in config: '0' at chip '/dev/gpiochip' defined as 'EXT2_K1'. It is already defined as 'EXT1_K1'. To override set similar MQTT id (name). @ config.cpp:47
> Apr 28 14:24:16 wirenboard-AUUUWP4R wb-mqtt-gpio[19591]: terminate called without an active exception
> Apr 28 14:24:16 wirenboard-AUUUWP4R systemd[1]: wb-mqtt-gpio.service: Main process exited, code=killed, status=6/ABRT
> Apr 28 14:24:16 wirenboard-AUUUWP4R systemd[1]: wb-mqtt-gpio.service: Unit entered failed state.
> Apr 28 14:24:16 wirenboard-AUUUWP4R systemd[1]: wb-mqtt-gpio.service: Failed with result 'signal'.
> 
> ```

А вот тут как раз ответ. Исправьте переопределение EXT2\_K1 либо удалите все WBIO модули и снова их сконфигурируйте.

---

<div class="post-metadata">

**Author:** ![aborichev](https://avatars.discourse-cdn.com/v2/letter/a/bc8723/32.png) [@aborichev](https://support.wirenboard.com/u/aborichev)\
**Post date:** [April 28, 2022, 1:55pm UTC](https://support.wirenboard.com/t/propala-bolshaya-chast-ustrojstv/11105/7 "2022-04-28T13:55:57Z")

</div>

Спасибо, удалил-добавил, и все стало норм. Есть ли какая-нибудь гипотеза, что случилось? Я руками точно ничего не переназначал, поскольку даже не знаю как это делать.

---

<div class="post-metadata">

**Author:** ![BrainRoot](https://avatars.discourse-cdn.com/v2/letter/b/c2a13f/32.png) [@BrainRoot](https://support.wirenboard.com/u/BrainRoot)\
**Post date:** [April 28, 2022, 2:01pm UTC](https://support.wirenboard.com/t/propala-bolshaya-chast-ustrojstv/11105/8 "2022-04-28T14:01:20Z")

</div>

Не гипотеха, точно, о чем в логе и говорится. Устройству было назначено имя другого, из-за чего это имя дублировалось. Да, надо было сохранить файл wb-mqtt-gpio.conf

---

<div class="post-metadata">

**Author:** ![system](https://support.wirenboard.com/uploads/default/original/2X/5/5ac90dc8a7bdff486d3494a19ec6aaa6f6cc5d36.png) [@system](https://support.wirenboard.com/u/system)\
**Post date:** [May 5, 2022, 2:01pm UTC](https://support.wirenboard.com/t/propala-bolshaya-chast-ustrojstv/11105/9 "2022-05-05T14:01:24Z")

</div>

Эта тема была автоматически закрыта через 7 дней после последнего ответа. В ней больше нельзя отвечать.