Debian GNU/Linux 9 wirenboard-AFHCFFDI ttymxc0 wirenboard-AFHCFFDI login: root Password: Last login: Tue Sep 25 11:09:06 UTC 2018 from 192.168.42.109 on pts/0 Linux wirenboard-AFHCFFDI 4.9.22-wb6 #2 SMP Wed Jul 18 15:48:43 UTC 2018 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@wirenboard-AFHCFFDI:~# [ U-Boot 2017.03-ge479d27901 (Jun 14 2018 - 15:57:30 +0000) CPU: Freescale i.MX6ULL rev1.0 900 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 40C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial EEPROM #0 MAC: d8:80:39:e3:62:36 EEPROM #1 MAC: d8:80:39:e3:91:23 Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 0 Checking if there is a USB storage with update file dev: 5v_out @ regulator@2 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... U-Boot 2017.03-ge479d27901 (Jun 14 2018 - 15:57:30 +0000) CPU: Freescale i.MX6ULL rev1.0 900 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 40C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial EEPROM #0 MAC: d8:80:39:e3:62:36 EEPROM #1 MAC: d8:80:39:e3:91:23 Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 0 Checking if there is a USB storage with update file dev: 5v_out @ regulator@2 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Device 0: Vendor: Rev: PMAP Prod: USB DISK 2.0 Type: Removable Hard Disk Capacity: 3824.0 MB = 3.7 GB (7831552 x 512) reading wb6_update.fit ** Unable to read file wb6_update.fit ** No USB update detected, continuing boot switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 44 bytes read in 69 ms (0 Bytes/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 5057640 bytes read in 357 ms (13.5 MiB/s) 42548 bytes read in 466 ms (88.9 KiB/s) Booting from mmc ... Kernel image @ 0x82000000 [ 0x000000 - 0x4d2c68 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 9ef4a000, end 9ef57633 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.22-wb6 (root@wbdevenv) (gcc version 6.3.0 20170 516 (Debian 6.3.0-18) ) #2 SMP Wed Jul 18 15:48:43 UTC 2018 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache [ 0.000000] OF: fdt:Machine model: Wiren Board rev. 6.1 (i.MX6UL/ULL) [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] percpu: Embedded 14 pages/cpu @defca000 s25932 r8192 d23220 u5734 4 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 130048 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 r ootwait ro [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 492256K/524288K available (6144K kernel code, 302K rwdata , 2264K rodata, 1024K init, 342K bss, 15648K reserved, 16384K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB) [ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB) [ 0.000000] .data : 0xc0b00000 - 0xc0b4b9c0 ( 303 kB) [ 0.000000] .bss : 0xc0b4d000 - 0xc0ba282c ( 343 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478 484971ns [ 0.000051] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002366] Console: colour dummy device 80x30 [ 0.002408] Calibrating delay loop (skipped), value calculated using timer fr equency.. 48.00 BogoMIPS (lpj=240000) [ 0.002440] pid_max: default: 32768 minimum: 301 [ 0.002639] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002667] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.003971] CPU: Testing write buffer coherency: ok [ 0.004488] /cpus/cpu@0 missing clock-frequency property [ 0.004529] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004584] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.006984] Brought up 1 CPUs [ 0.007018] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.007035] CPU: All CPU(s) started in SVC mode. [ 0.008390] devtmpfs: initialized [ 0.032668] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.033427] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns [ 0.033474] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.034786] pinctrl core: initialized pinctrl subsystem [ 0.036967] NET: Registered protocol family 16 [ 0.038724] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.041930] cpuidle: using governor menu [ 0.074898] No ATAGs? [ 0.074955] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.074978] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.077153] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.121932] mxs-dma 1804000.dma-apbh: initialized [ 0.127133] SCSI subsystem initialized [ 0.127757] usbcore: registered new interface driver usbfs [ 0.127910] usbcore: registered new interface driver hub [ 0.128146] usbcore: registered new device driver usb [ 0.129867] i2c-gpio i2c_rtc: using pins 48 (SDA) and 49 (SCL) [ 0.130774] i2c-gpio i2c_eeprom1: using pins 76 (SDA) and 67 (SCL) [ 0.131793] i2c-gpio i2c_eeprom2: using pins 70 (SDA) and 71 (SCL) [ 0.133131] i2c i2c-1: IMX I2C adapter registered [ 0.133174] i2c i2c-1: can't use DMA, using PIO instead. [ 0.133521] Linux video capture interface: v2.00 [ 0.133681] pps_core: LinuxPPS API ver. 1 registered [ 0.133702] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti [ 0.133754] PTP clock support registered [ 0.134479] Advanced Linux Sound Architecture Driver Initialized. [ 0.136910] clocksource: Switched to clocksource mxc_timer1 [ 0.161180] NET: Registered protocol family 2 [ 0.162407] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.162532] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.162690] TCP: Hash tables configured (established 4096 bind 4096) [ 0.162807] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.162862] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.163182] NET: Registered protocol family 1 [ 0.164017] RPC: Registered named UNIX socket transport module. [ 0.164047] RPC: Registered udp transport module. [ 0.164062] RPC: Registered tcp transport module. [ 0.164077] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.168857] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.185398] NFS: Registering the id_resolver key type [ 0.185494] Key type id_resolver registered [ 0.185513] Key type id_legacy registered [ 0.195654] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 47) [ 0.195687] io scheduler noop registered (default) [ 0.195705] io scheduler deadline registered [ 0.195801] io scheduler cfq registered [ 0.202582] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx 6q.bin failed with error -2 [ 0.202627] imx-sdma 20ec000.sdma: external firmware not found, using ROM fir mware [ 0.211579] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 18, base_baud = 5000000) is a IMX [ 0.790865] console [ttymxc0] enabled [ 0.796333] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 53, base_baud = 5000000) is a IMX [ 0.806611] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 54, base_baud = 5000000) is a IMX [ 0.849907] imx_rngc 2284000.rngb: Freescale RNGC registered. [ 0.855958] [drm] Initialized [ 0.894024] brd: module loaded [ 0.913073] loop: module loaded [ 0.921305] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 0.932748] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 0.943491] libphy: Fixed MDIO Bus: probed [ 0.950443] 2188000.ethernet supply phy not found, using dummy regulator [ 0.958466] pps pps0: new PPS source ptp0 [ 0.963676] libphy: fec_enet_mii_bus: probed [ 0.971841] fec 2188000.ethernet eth0: registered PHC device 0 [ 0.978398] PPP generic driver version 2.4.2 [ 0.983199] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.989886] ehci-mxc: Freescale On-Chip EHCI Host driver [ 0.995721] usbcore: registered new interface driver usb-storage [ 1.002333] usbcore: registered new interface driver usbserial [ 1.008473] usbcore: registered new interface driver usbserial_generic [ 1.015130] usbserial: USB Serial support registered for generic [ 1.021781] mousedev: PS/2 mouse device common for all mice [ 1.072882] rtc rtc0: invalid alarm value: 2018-10-3 24:15:0 [ 1.079221] rtc-pcf8563 4-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 1.095345] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.s nvs:snvs-r as rtc1 [ 1.104471] i2c /dev entries driver [ 1.117827] lm75 4-0048: hwmon0: sensor 'lm75b' [ 1.238523] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.246606] sdhci: Secure Digital Host Controller Interface driver [ 1.252944] sdhci: Copyright(c) Pierre Ossman [ 1.257376] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.326990] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADM A [ 1.346490] ledtrig-cpu: registered to indicate activity on CPUs [ 1.370879] usbcore: registered new interface driver usbhid [ 1.378638] usbhid: USB HID core driver [ 1.404257] NET: Registered protocol family 10 [ 1.411254] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.419132] NET: Registered protocol family 17 [ 1.423796] Key type dns_resolver registered [ 1.433074] Registering SWP/SWPB emulation handler [ 1.439968] registered taskstats version 1 [ 1.462888] mmc0: new DDR MMC card at address 0001 [ 1.469814] imx_thermal 2000000.aips-bus:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 1.480630] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.485544] mmcblk0boot0: mmc0:0001 SEM04G partition 1 1.00 MiB [ 1.504258] rtc-pcf8563 4-0051: setting system clock to 2018-10-01 11:15:41 U TC (1538392541) [ 1.512748] of_cfs_init [ 1.515505] mmcblk0boot1: mmc0:0001 SEM04G partition 2 1.00 MiB [ 1.521918] mmcblk0rpmb: mmc0:0001 SEM04G partition 3 128 KiB [ 1.530797] of_cfs_init: OK [ 1.538828] vdd3p0: disabling [ 1.542047] vref-3v3: disabling [ 1.545284] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 1.549581] usb1_vbus: disabling [ 1.552827] usb2_vbus: disabling [ 1.556064] can_xceiver: disabling [ 1.559514] ALSA device list: [ 1.562490] No soundcards found. [ 1.571157] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incomp atibilities [ 1.580273] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incomp atibilities [ 1.590683] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesyst em [ 1.598123] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 1.646781] random: fast init done [ 1.658029] EXT4-fs (mmcblk0p2): recovery complete [ 1.665497] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null) [ 1.673726] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.681892] devtmpfs: mounted [ 1.686110] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) [ 2.086141] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.120760] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL + XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.139873] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 2.198229] systemd[1]: Set hostname to . [ 2.891585] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 2.927495] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 2.967428] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 3.018592] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 3.058318] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 3.098188] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 3.128212] systemd[1]: Started Forward Password Requests to Wall Directory W atch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Encrypted Volumes. [ OK ] Reached target Paths. [ OK ] Listening on fsck to fsckd communication Socket. [ OK ] Created slice System Slice. Starting File System Check on Root Device... Mounting POSIX Message Queue File System... [ OK ] Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-getty.slice. Mounting Debug File System... Starting Create list of required st…ce nodes for the current kernel... [ OK ] Created slice system-serial\x2dgetty.slice. Mounting /sys/kernel/config... Starting Load Kernel Modules... [ OK ] Reached target Slices. [ OK ] Reached target Remote File Systems. Starting Journal Service... [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Mounted /sys/kernel/config. [ OK ] Started File System Check on Root Device. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Load Kernel Modules. [ OK ] Started Journal Service. [ OK ] Started File System Check Daemon to report status. Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... Starting Remount Root and Kernel File Systems... [ OK ] Started Apply Kernel Variables. [ 4.086673] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Flush Journal to Persistent Storage... Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting udev Kernel Device Manager... [ OK ] Started Load/Save Random Seed. [ 4.424991] systemd-journald[119]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started udev Kernel Device Manager. [ OK ] Started udev Coldplug all Devices. [ 5.678903] Driver for 1-wire Dallas network protocol. [ 5.701168] lirc_dev: IR Remote Control driver registered, major 245 [ 5.760788] lirc_pwm: module is from the staging directory, the quality is unknown, you have been warned. [ 5.840758] lirc_pwm lirc-rfm69: GPIO receiver on pin 77 [ 5.897203] lirc_pwm lirc-rfm69: lirc_dev: driver lirc-rfm69 registered at minor = 0 [ 5.904972] lirc_pwm lirc-rfm69: probed [ OK ] Found device /dev/ttymxc0. [ 6.323941] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 6.358682] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 6.467120] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 6.514949] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.521900] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.529188] usb usb1: Product: EHCI Host Controller [ 6.534074] usb usb1: Manufacturer: Linux 4.9.22-wb6 ehci_hcd [ 6.539872] usb usb1: SerialNumber: ci_hdrc.0 [ 6.759994] hub 1-0:1.0: USB hub found [ 6.795866] hub 1-0:1.0: 1 port detected [ 6.889754] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 6.894705] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 7.047072] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 7.086269] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.093209] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.100491] usb usb2: Product: EHCI Host Controller [ 7.105378] usb usb2: Manufacturer: Linux 4.9.22-wb6 ehci_hcd [ 7.111156] usb usb2: SerialNumber: ci_hdrc.1 [ OK ] Found device /dev/mmcblk0p5. [ 7.340207] hub 2-0:1.0: USB hub found [ OK ] Found device /dev/mmcblk0p6. [ 7.377677] hub 2-0:1.0: 1 port detected Starting File System Check on /dev/mmcblk0p6... Activating swap /dev/mmcblk0p5... [ 7.762094] Adding 262140k swap on /dev/mmcblk0p5. Priority:-1 extents:1 across:262140k SS [ 7.778496] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ 7.977705] usb 2-1: New USB device found, idVendor=0424, idProduct=2514 [ 7.984478] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 8.010812] hub 2-1:1.0: USB hub found [ 8.015056] hub 2-1:1.0: 4 ports detected [ OK ] Started File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 8.213365] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /mnt/data. Starting prepare mounts and symlinks to config files... [ 8.337059] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 8.347778] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 8.488547] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720 [ 8.495480] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.502965] usb 2-1.1: Product: 802.11n WLAN Adapter [ 8.507980] usb 2-1.1: Manufacturer: Realtek [ 8.512259] usb 2-1.1: SerialNumber: 00e04c000001 [ 8.602171] usb 1-1: New USB device found, idVendor=13fe, idProduct=4200 [ 8.609040] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.616183] usb 1-1: Product: USB DISK 2.0 [ 8.620338] usb 1-1: Manufacturer: [ 8.624529] usb 1-1: SerialNumber: 0701786F9BD5EA85 [ 8.719142] usb-storage 1-1:1.0: USB Mass Storage device detected [ 8.744965] Bluetooth: Core ver 2.22 [ OK ] Listening on Load/Save RF Kill Switch Status /[ 8.761995] NET: Registered protocol family 31 dev/rfkill Watch. [ 8.768465] Bluetooth: HCI device and connection manager initialized [ 8.789216] scsi host0: usb-storage 1-1:1.0 [ 8.807070] Bluetooth: HCI socket layer initialized [ 8.821451] Bluetooth: L2CAP socket layer initialized [ 8.826577] Bluetooth: SCO socket layer initialized [ 8.894604] usbcore: registered new interface driver btusb Starting Load/Save RF Kill Switc[ 8.914409] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 h Status... [ 8.925590] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin [ 8.958212] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 8.967486] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin [ 8.974022] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin [ 8.982651] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_fw.bin failed with error -2 [ 8.991595] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_fw.bin [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Started prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Reached target System Time Synchronized. [FAILED] Failed to start Update UTMP about System Boot/Shutdown. See 'systemctl status systemd-update-utmp.service' for details. [DEPEND] Dependency failed for Update UTMP about System Runlevel Changes. [ 9.850055] 8723bu: module is from the staging directory, the quality is unknown, you have been warned. [ OK ] Reached target System Initialization. [ 9.865176] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6 [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ 9.918033] RTL871X: module init start [ 9.921812] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 [ 9.928935] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Reached target Basic System. [ 10.135969] RTL871X: rtw_ndev_init(wlan0) [ 10.145813] RTL871X: rtw_ndev_init(wlan1) [ OK ] Started Regular background program processing daemon. [ 10.180069] usbcore: registered new interface driver rtl8723bu [ 10.185924] RTL871X: module init ret=0 [ OK ] Started D-Bus System Message Bus. Starting Mosquitto MQTT v3.1/v3.1.1 Broker... Starting Login Service... Starting Bluetooth service... Starting Avahi mDNS/DNS-SD Stack... [ 10.619731] sd 0:0:0:0: [sda] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB) Starting LSB: prepare partitions & rootfs... [ OK ] Started watch config files. [ 10.665410] sd 0:0:0:0: [sda] Write Protect is off Starting LSB: Kernel 1-wire MQTT driver for WB-HomA... [ 10.737679] sd 0:0:0:0: [sda] No Caching mode page found [ 10.743071] sd 0:0:0:0: [sda] Assuming drive cache: write through Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... Starting LSB: Hardware configuration with Device Tree overlays... Starting LSB: Starts syslogd... [ OK ] Started Cgroup management daemon. [ 10.933454] sda: sda1 [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ 10.991605] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 11.182482] cgroup: new mount options do not match the existing superblock, will be ignored [ 11.363952] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.369426] Bluetooth: BNEP filters: protocol multicast [ 11.390128] Bluetooth: BNEP socket layer initialized [ OK ] Started Mosquitto MQTT v3.1/v3.1.1 Broker. [ OK ] Started LSB: Kernel 1-wire MQTT driver for WB-HomA. [ OK ] Started LSB: Starts syslogd. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Bluetooth service. [ OK ] Started Login Service. Starting Hostname Service... [ OK ] Reached target Bluetooth. Starting LSB: Starts klogd... [ OK ] Started ifup for wlan0. Starting LSB: Firmware update monitor... Starting LSB: MQTT Driver for ADC... Starting LSB: WB LIRC driver for infrared remote control... Starting LSB: MQTT driver for WB HomA for RFM69 ISM radio... Starting LSB: Configuration Editor Backend... Starting LSB: MQTT Driver for serial devices... Starting LSB: MQTT Rule Engine for Wiren Board... Starting LSB: : Wiren Board database logger... Starting LSB: MQTT Driver for GPIO-controlled switches... [ OK ] Started LSB: prepare partitions & rootfs. [ OK ] Started Hostname Service. [ OK ] Started LSB: Firmware update monitor. [ OK ] Started LSB: MQTT Driver for ADC. [ OK ] Started LSB: WB LIRC driver for infrared remote control. [ OK ] Started LSB: Hardware configuration with Device Tree overlays. [ OK ] Started LSB: Configuration Editor Backend. [ OK ] Started LSB: MQTT Driver for serial devices. [ 14.799542] RTL871X: RTW_ADAPTIVITY_EN_[ 14.803233] AUTO, chplan:0x20, Regulation:3,3 [ 14.807715] RTL871X: RTW_ADAPTIVITY_MODE_[ 14.811557] NORMAL [ OK ] Started LSB: MQTT Rule Engine for Wiren Board. [ OK ] Started LSB: : Wiren Board database logger. [ OK ] Started LSB: MQTT Driver for GPIO-controlled switches. Starting LSB: initscript to use GSM modem integrated RTC... [ OK ] Started LSB: MQTT driver for WB HomA for RFM69 ISM radio. [ OK ] Started LSB: Starts klogd. [ OK ] Started LSB: initscript to use GSM modem integrated RTC. Starting Raise network interfaces... [ OK ] Started Raise network interfaces. [ OK ] Reached target Network. Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Reached target Network is Online. Starting LSB: Advanced IEEE 802.11 management daemon... Starting LSB: Start NTP daemon... Starting LSB: Brings up/down network automatically... Starting dnsmasq - A lightweight DHCP and caching DNS server... Starting A high performance web server and a reverse proxy server... [ OK ] Started Permit User Sessions. [ 17.364809] random: crng init done [ 18.112897] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 18.584198] RTL871X: assoc success [ 18.588023] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 18.737431] SMSC LAN8710/LAN8720 2188000.ethernet:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1) [ OK ] Started LSB: Start NTP daemon. [ 18.887676] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Starting LSB: board-specific initscript... [ OK ] Started Serial Getty on ttymxc0. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started dnsmasq - A lightweight DHCP and caching DNS server. [ OK ] Started LSB: board-specific initscript. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started A high performance web server and a reverse proxy server. [ OK ] Started LSB: Brings up/down network automatically. [ OK ] Reached target Multi-User System. Starting watchdog daemon... [ OK ] Started watchdog daemon. [ OK ] Reached target Graphical Interface. Debian GNU/Linux 9 wirenboard-AFHCFFDI ttymxc0 wirenboard-AFHCFFDI login: [ U-Boot 2017.03-ge479d27901 (Jun 14 2018 - 15:57:30 +0000) CPU: Freescale i.MX6ULL rev1.0 900 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 43C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial EEPROM #0 MAC: d8:80:39:e3:62:36 EEPROM #1 MAC: d8:80:39:e3:91:23 Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 0 Checking if there is a USB storage with update file dev: 5v_out @ regulator@2 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Device 0: Vendor: Rev: PMAP Prod: USB DISK 2.0 Type: Removable Hard Disk Capacity: 3824.0 MB = 3.7 GB (7831552 x 512) reading wb6_update.fit ** Unable to read file wb6_update.fit ** No USB update detected, continuing boot switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 44 bytes read in 69 ms (0 Bytes/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 5057640 bytes read in 357 ms (13.5 MiB/s) 42548 bytes read in 467 ms (88.9 KiB/s) Booting from mmc ... Kernel image @ 0x82000000 [ 0x000000 - 0x4d2c68 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 9ef4a000, end 9ef57633 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.22-wb6 (root@wbdevenv) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #2 SMP Wed Jul 18 15:48:43 UTC 2018 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Wiren Board rev. 6.1 (i.MX6UL/ULL) [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] percpu: Embedded 14 pages/cpu @defca000 s25932 r8192 d23220 u57344 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 492256K/524288K available (6144K kernel code, 302K rwdata, 2264K rodata, 1024K init, 342K bss, 15648K reserved, 16384K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB) [ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB) [ 0.000000] .data : 0xc0b00000 - 0xc0b4b9c0 ( 303 kB) [ 0.000000] .bss : 0xc0b4d000 - 0xc0ba282c ( 343 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000053] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002379] Console: colour dummy device 80x30 [ 0.002422] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002458] pid_max: default: 32768 minimum: 301 [ 0.002658] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002683] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.003999] CPU: Testing write buffer coherency: ok [ 0.004517] /cpus/cpu@0 missing clock-frequency property [ 0.004557] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004612] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.006998] Brought up 1 CPUs [ 0.007033] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.007049] CPU: All CPU(s) started in SVC mode. [ 0.008416] devtmpfs: initialized [ 0.032747] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.033497] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.033543] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.034867] pinctrl core: initialized pinctrl subsystem [ 0.037063] NET: Registered protocol family 16 [ 0.038827] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.042059] cpuidle: using governor menu [ 0.075119] No ATAGs? [ 0.075174] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.075198] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.077373] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.122173] mxs-dma 1804000.dma-apbh: initialized [ 0.127384] SCSI subsystem initialized [ 0.128008] usbcore: registered new interface driver usbfs [ 0.128166] usbcore: registered new interface driver hub [ 0.128406] usbcore: registered new device driver usb [ 0.130112] i2c-gpio i2c_rtc: using pins 48 (SDA) and 49 (SCL) [ 0.131011] i2c-gpio i2c_eeprom1: using pins 76 (SDA) and 67 (SCL) [ 0.132034] i2c-gpio i2c_eeprom2: using pins 70 (SDA) and 71 (SCL) [ 0.133365] i2c i2c-1: IMX I2C adapter registered [ 0.133409] i2c i2c-1: can't use DMA, using PIO instead. [ 0.133750] Linux video capture interface: v2.00 [ 0.133906] pps_core: LinuxPPS API ver. 1 registered [ 0.133927] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.133981] PTP clock support registered [ 0.134710] Advanced Linux Sound Architecture Driver Initialized. [ 0.137136] clocksource: Switched to clocksource mxc_timer1 [ 0.161317] NET: Registered protocol family 2 [ 0.162534] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.162660] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.162819] TCP: Hash tables configured (established 4096 bind 4096) [ 0.162934] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.162989] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.163304] NET: Registered protocol family 1 [ 0.164141] RPC: Registered named UNIX socket transport module. [ 0.164172] RPC: Registered udp transport module. [ 0.164187] RPC: Registered tcp transport module. [ 0.164202] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.168976] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.185551] NFS: Registering the id_resolver key type [ 0.185619] Key type id_resolver registered [ 0.185636] Key type id_legacy registered [ 0.195796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.195831] io scheduler noop registered (default) [ 0.195852] io scheduler deadline registered [ 0.195945] io scheduler cfq registered [ 0.202765] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.202808] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.211742] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 18, base_baud = 5000000) is a IMX [ 0.791030] console [ttymxc0] enabled [ 0.796501] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 53, base_baud = 5000000) is a IMX [ 0.806779] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 54, base_baud = 5000000) is a IMX [ 0.850095] imx_rngc 2284000.rngb: Freescale RNGC registered. [ 0.856139] [drm] Initialized [ 0.894203] brd: module loaded [ 0.913232] loop: module loaded [ 0.921445] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 0.932872] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 0.943613] libphy: Fixed MDIO Bus: probed [ 0.950606] 2188000.ethernet supply phy not found, using dummy regulator [ 0.958630] pps pps0: new PPS source ptp0 [ 0.963847] libphy: fec_enet_mii_bus: probed [ 0.971998] fec 2188000.ethernet eth0: registered PHC device 0 [ 0.978560] PPP generic driver version 2.4.2 [ 0.983374] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.990056] ehci-mxc: Freescale On-Chip EHCI Host driver [ 0.995888] usbcore: registered new interface driver usb-storage [ 1.002499] usbcore: registered new interface driver usbserial [ 1.008640] usbcore: registered new interface driver usbserial_generic [ 1.015297] usbserial: USB Serial support registered for generic [ 1.021949] mousedev: PS/2 mouse device common for all mice [ 1.073118] rtc rtc0: invalid alarm value: 2018-10-3 24:15:0 [ 1.079454] rtc-pcf8563 4-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 1.095578] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 [ 1.104703] i2c /dev entries driver [ 1.118053] lm75 4-0048: hwmon0: sensor 'lm75b' [ 1.238771] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.246824] sdhci: Secure Digital Host Controller Interface driver [ 1.253164] sdhci: Copyright(c) Pierre Ossman [ 1.257596] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.327216] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.346703] ledtrig-cpu: registered to indicate activity on CPUs [ 1.371096] usbcore: registered new interface driver usbhid [ 1.378856] usbhid: USB HID core driver [ 1.404498] NET: Registered protocol family 10 [ 1.411492] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.419389] NET: Registered protocol family 17 [ 1.424047] Key type dns_resolver registered [ 1.433314] Registering SWP/SWPB emulation handler [ 1.440209] registered taskstats version 1 [ 1.463132] mmc0: new DDR MMC card at address 0001 [ 1.470071] imx_thermal 2000000.aips-bus:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 1.480893] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.485811] mmcblk0boot0: mmc0:0001 SEM04G partition 1 1.00 MiB [ 1.504540] rtc-pcf8563 4-0051: setting system clock to 2018-10-01 11:17:23 UTC (1538392643) [ 1.513032] of_cfs_init [ 1.515791] mmcblk0boot1: mmc0:0001 SEM04G partition 2 1.00 MiB [ 1.522211] mmcblk0rpmb: mmc0:0001 SEM04G partition 3 128 KiB [ 1.531087] of_cfs_init: OK [ 1.539110] vdd3p0: disabling [ 1.542330] vref-3v3: disabling [ 1.545569] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 1.549864] usb1_vbus: disabling [ 1.553108] usb2_vbus: disabling [ 1.556343] can_xceiver: disabling [ 1.559790] ALSA device list: [ 1.562765] No soundcards found. [ 1.571398] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.580516] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.590933] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 1.598370] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 1.644796] random: fast init done [ 1.656110] EXT4-fs (mmcblk0p2): recovery complete [ 1.663671] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.671892] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.680049] devtmpfs: mounted [ 1.684261] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) [ 2.084395] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.119773] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.138904] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 2.198430] systemd[1]: Set hostname to . [ 2.889434] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 2.927815] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 2.957950] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 2.987844] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 3.027632] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 3.058047] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 3.088045] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on fsck to fsckd communication Socket. [ OK ] Reached target Encrypted Volumes. [ OK ] Created slice System Slice. Mounting POSIX Message Queue File System... Mounting Debug File System... [ OK ] Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-getty.slice. [ OK ] Reached target Slices. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Reached target Remote File Systems. Mounting /sys/kernel/config... [ OK ] Listening on Journal Socket. Starting File System Check on Root Device... Starting Journal Service... Starting Create list of required st…ce nodes for the current kernel... Starting Load Kernel Modules... [ OK ] Listening on udev Control Socket. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Mounted /sys/kernel/config. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Load Kernel Modules. [ OK ] Started File System Check Daemon to report status. Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... [ OK ] Started File System Check on Root Device. [ OK ] Started Journal Service. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... Starting Remount Root and Kernel File Systems... [ 4.093852] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started udev Kernel Device Manager. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Load/Save Random Seed... Starting udev Coldplug all Devices... Starting Flush Journal to Persistent Storage... [ OK ] Started Load/Save Random Seed. [ 4.448053] systemd-journald[112]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started udev Coldplug all Devices. [ 5.655573] lirc_dev: IR Remote Control driver registered, major 245 [ 5.710266] Driver for 1-wire Dallas network protocol. [ 5.736820] lirc_pwm: module is from the staging directory, the quality is unknown, you have been warned. [ 5.805220] lirc_pwm lirc-rfm69: GPIO receiver on pin 77 [ 5.875044] lirc_pwm lirc-rfm69: lirc_dev: driver lirc-rfm69 registered at minor = 0 [ 5.941008] lirc_pwm lirc-rfm69: probed [ OK ] Found device /dev/ttymxc0. [ 6.326741] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 6.369188] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 6.477535] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 6.504363] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.511303] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.518581] usb usb1: Product: EHCI Host Controller [ 6.523466] usb usb1: Manufacturer: Linux 4.9.22-wb6 ehci_hcd [ 6.529265] usb usb1: SerialNumber: ci_hdrc.0 [ 6.746883] hub 1-0:1.0: USB hub found [ 6.775983] hub 1-0:1.0: 1 port detected [ 6.860034] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 6.864984] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 7.017416] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 7.067661] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.074476] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.081812] usb usb2: Product: EHCI Host Controller [ 7.086700] usb usb2: Manufacturer: Linux 4.9.22-wb6 ehci_hcd [ 7.092491] usb usb2: SerialNumber: ci_hdrc.1 [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/mmcblk0p6. [ 7.305863] hub 2-0:1.0: USB hub found [ 7.337400] hub 2-0:1.0: 1 port detected Starting File System Check on /dev/mmcblk0p6... Activating swap /dev/mmcblk0p5... [ 7.737286] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 7.752425] Adding 262140k swap on /dev/mmcblk0p5. Priority:-1 extents:1 across:262140k SS [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ OK ] Started File System Check on /dev/mmcblk0p6. [ 7.928136] usb 2-1: New USB device found, idVendor=0424, idProduct=2514 [ 7.934910] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Mounting /mnt/data... [ 8.003439] hub 2-1:1.0: USB hub found [ 8.015550] hub 2-1:1.0: 4 ports detected [ 8.122777] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /mnt/data. Starting prepare mounts and symlinks to config files... [ 8.347371] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 8.354116] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 8.508833] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720 [ 8.515767] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.523267] usb 2-1.1: Product: 802.11n WLAN Adapter [ 8.528284] usb 2-1.1: Manufacturer: Realtek [ 8.532562] usb 2-1.1: SerialNumber: 00e04c000001 [ 8.596846] usb 1-1: New USB device found, idVendor=13fe, idProduct=4200 [ 8.603707] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.610928] usb 1-1: Product: USB DISK 2.0 [ 8.615032] usb 1-1: Manufacturer: [ 8.619250] usb 1-1: SerialNumber: 0701786F9BD5EA85 [ 8.730855] Bluetooth: Core ver 2.22 [ 8.752275] NET: Registered protocol family 31 [ 8.756744] Bluetooth: HCI device and connection manager initialized [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 8.782471] usb-storage 1-1:1.0: USB Mass Storage device detected [ 8.809842] scsi host0: usb-storage 1-1:1.0 [ 8.814805] Bluetooth: HCI socket layer initialized [ 8.844520] Bluetooth: L2CAP socket layer initialized [ 8.856299] Bluetooth: SCO socket layer initialized [ 8.929345] usbcore: registered new interface driver btusb Starting Load/Save RF Kill Switch Status... [ 8.957711] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 8.966439] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin [ 9.001983] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 9.011263] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin [ 9.017844] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin [ 9.026264] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_fw.bin failed with error -2 [ 9.035184] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_fw.bin [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Started prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. [ OK ] Reached target System Time Synchronized. Starting Update UTMP about System Boot/Shutdown... [FAILED] Failed to start Update UTMP about System Boot/Shutdown. See 'systemctl status systemd-update-utmp.service' for details. [DEPEND] Dependency failed for Update UTMP about System Runlevel Changes. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ 9.846215] 8723bu: module is from the staging directory, the quality is unknown, you have been warned. [ OK ] Started Daily [ 9.873237] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6 Cleanup of Temporary Directories. [ 9.898925] RTL871X: module init starte Bus Socket. [ 9.904480] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 [ 9.911576] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... Starting Login Service... [ OK ] Started watch config files. Starting LSB: prepare partitions & rootfs... Starting LSB: Hardware configuration with Device Tree overlays... [ OK ] Started Regular background program processing daemon. [ OK ] Started Cgroup management daemon. Starting Mosquitto MQTT v3.1/v3.1.1 Broker... Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... [ OK ] Started D-Bus System Message Bus. [ 10.441557] RTL871X: rtw_ndev_init(wlan0) [ 10.482619] cgroup: new mount options do not match the existing superblock, will be ignored [ 10.521405] RTL871X: rtw_ndev_init(wlan1) [ 10.597548] usbcore: registered new interface driver rtl8723bu [ 10.603403] RTL871X: module init ret=0 [ 10.657520] sd 0:0:0:0: [sda] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB) [ 10.740428] sd 0:0:0:0: [sda] Write Protect is off [ 10.806428] sd 0:0:0:0: [sda] No Caching mode page found [ 10.811960] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 10.957475] sda: sda1 [ 10.992098] sd 0:0:0:0: [sda] Attached SCSI removable disk [ OK ] Started Bluetooth service. [ 11.192926] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.198391] Bluetooth: BNEP filters: protocol multicast [ OK ] Reached target Bluetooth. [ 11.231651] Bluetooth: BNEP socket layer initialized Starting LSB: Starts syslogd... Starting LSB: Kernel 1-wire MQTT driver for WB-HomA... Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ OK ] Started Mosquitto MQTT v3.1/v3.1.1 Broker. [ OK ] Started LSB: Kernel 1-wire MQTT driver for WB-HomA. [ OK ] Started LSB: prepare partitions & rootfs. [ OK ] Started LSB: Starts syslogd. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Login Service. Starting LSB: Starts klogd... Starting Hostname Service... [ OK ] Started ifup for wlan0. Starting LSB: MQTT driver for WB HomA for RFM69 ISM radio... Starting LSB: : Wiren Board database logger... Starting LSB: MQTT Rule Engine for Wiren Board... Starting LSB: WB LIRC driver for infrared remote control... Starting LSB: MQTT Driver for GPIO-controlled switches... Starting LSB: MQTT Driver for serial devices... Starting LSB: Firmware update monitor... Starting LSB: Configuration Editor Backend... Starting LSB: MQTT Driver for ADC... [ OK ] Started Hostname Service. [ OK ] Started LSB: Hardware configuration with Device Tree overlays. [ OK ] Started LSB: : Wiren Board database logger. [ OK ] Started LSB: MQTT Rule Engine for Wiren Board. [ OK ] Started LSB: WB LIRC driver for infrared remote control. [ 14.232927] RTL871X: RTW_ADAPTIVITY_EN_[ 14.236661] AUTO, chplan:0x20, Regulation:3,3 [ 14.241142] RTL871X: RTW_ADAPTIVITY_MODE_[ 14.244983] NORMAL [ OK ] Started LSB: MQTT Driver for GPIO-controlled switches. [ OK ] Started LSB: Firmware update monitor. [ OK ] Started LSB: MQTT Driver for serial devices. [ OK ] Started LSB: MQTT Driver for ADC. [ OK ] Started LSB: Configuration Editor Backend. [ OK ] Started LSB: Starts klogd. Starting LSB: initscript to use GSM modem integrated RTC... [ OK ] Started LSB: MQTT driver for WB HomA for RFM69 ISM radio. [ OK ] Started LSB: initscript to use GSM modem integrated RTC. Starting Raise network interfaces... [ OK ] Started Raise network interfaces. [ OK ] Reached target Network. [ 16.919831] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Starting dnsmasq - A lightweight DHCP and caching DNS server... [ OK ] Reached target Network is Online. Starting LSB: Start NTP daemon... [ 17.114817] random: crng init done Starting LSB: Advanced IEEE 802.11 management daemon... Starting LSB: Brings up/down network automatically... Starting OpenBSD Secure Shell server... Starting A high performance web server and a reverse proxy server... Starting Permit User Sessions... [ OK ] Started Permit User Sessions. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started LSB: Start NTP daemon. [ 18.968680] RTL871X: nolinked power save enter Starting LSB: board-specific initscript... [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttymxc0. [ OK ] Reached target Login Prompts. [ OK ] Started LSB: board-specific initscript. [ 20.464336] RTL871X: RTW_ADAPTIVITY_EN_[ 20.468103] AUTO, chplan:0x20, Regulation:3,3 [ 20.472495] RTL871X: RTW_ADAPTIVITY_MODE_[ 20.476332] NORMAL [ 21.216754] RTL871X: nolinked power save leave [ 21.547449] SMSC LAN8710/LAN8720 2188000.ethernet:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1) [ 21.561189] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.693132] RTL871X: assoc success [ 21.696799] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. [ OK ] Started dnsmasq - A lightweight DHCP and caching DNS server. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started A high performance web server and a reverse proxy server. [ OK ] Started LSB: Brings up/down network automatically. [ OK ] Reached target Multi-User System. Starting watchdog daemon... [ OK ] Started watchdog daemon. [ OK ] Reached target Graphical Interface. Debian GNU/Linux 9 wirenboard-AFHCFFDI ttymxc0 wirenboard-AFHCFFDI login: