U-Boot 2017.03-g5fcb63e1c5 (Jul 17 2018 - 16:48:05 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 51C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial EEPROM #0 MAC: 54:10:ec:ef:3f:b9 EEPROM #1 MAC: 54:10:ec:ef:85:96 Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 0 Checking if there is a USB storage with update file wb6_update.fit dev: 5v_out @ regulator@2 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found No storage devices, perhaps not 'usb start'ed..? No USB update detected, continuing boot switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 323 bytes read in 58 ms (4.9 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 5057640 bytes read in 338 ms (14.3 MiB/s) 44468 bytes read in 392 ms (110.4 KiB/s) MMC read: dev # 0, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC 485 bytes read in 140 ms (2.9 KiB/s) Applying DT overlay wb6-nogsm 597 bytes read in 133 ms (3.9 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu ** File not found /boot/overlays/wb6-radio-rfm69h.dtbo ** 334 bytes read in 101 ms (2.9 KiB/s) Applying DT overlay wb6-eth1 254 bytes read in 114 ms (2 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x82000000 [ 0x000000 - 0x4d2c68 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 9ef34000, end 9ef56fff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.22-wb6 (root@wbdevenv) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #2 SMP Sat Jan 26 11:34:05 UTC 2019 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Wiren Board rev. 6.1 (i.MX6UL/ULL) [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] percpu: Embedded 14 pages/cpu @defc8000 s25932 r8192 d23220 u57344 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 492244K/524288K available (6144K kernel code, 302K rwdata, 2264K rodata, 1024K init, 342K bss, 15660K reserved, 16384K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB) [ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB) [ 0.000000] .data : 0xc0b00000 - 0xc0b4b9c0 ( 303 kB) [ 0.000000] .bss : 0xc0b4d000 - 0xc0ba282c ( 343 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000052] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002497] Console: colour dummy device 80x30 [ 0.002537] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002569] pid_max: default: 32768 minimum: 301 [ 0.002769] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.004102] CPU: Testing write buffer coherency: ok [ 0.004605] /cpus/cpu@0 missing clock-frequency property [ 0.004647] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004704] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.007091] Brought up 1 CPUs [ 0.007126] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.007142] CPU: All CPU(s) started in SVC mode. [ 0.008564] devtmpfs: initialized [ 0.034873] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.035610] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.035660] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.036986] pinctrl core: initialized pinctrl subsystem [ 0.039199] NET: Registered protocol family 16 [ 0.041267] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.044108] cpuidle: using governor menu [ 0.078117] No ATAGs? [ 0.078173] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.078196] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.080396] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.125466] mxs-dma 1804000.dma-apbh: initialized [ 0.130051] SCSI subsystem initialized [ 0.130675] usbcore: registered new interface driver usbfs [ 0.130837] usbcore: registered new interface driver hub [ 0.131077] usbcore: registered new device driver usb [ 0.132959] i2c-gpio i2c_rtc: using pins 48 (SDA) and 49 (SCL) [ 0.133860] i2c-gpio i2c_eeprom1: using pins 76 (SDA) and 67 (SCL) [ 0.134743] i2c-gpio i2c_eeprom2: using pins 70 (SDA) and 71 (SCL) [ 0.136082] i2c i2c-1: IMX I2C adapter registered [ 0.136125] i2c i2c-1: can't use DMA, using PIO instead. [ 0.136454] Linux video capture interface: v2.00 [ 0.136610] pps_core: LinuxPPS API ver. 1 registered [ 0.136630] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.136685] PTP clock support registered [ 0.137432] Advanced Linux Sound Architecture Driver Initialized. [ 0.139891] clocksource: Switched to clocksource mxc_timer1 [ 0.163996] NET: Registered protocol family 2 [ 0.165223] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.165347] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.165505] TCP: Hash tables configured (established 4096 bind 4096) [ 0.165617] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.165673] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.165978] NET: Registered protocol family 1 [ 0.166800] RPC: Registered named UNIX socket transport module. [ 0.166832] RPC: Registered udp transport module. [ 0.166848] RPC: Registered tcp transport module. [ 0.166864] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.171704] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.188323] NFS: Registering the id_resolver key type [ 0.188395] Key type id_resolver registered [ 0.188416] Key type id_legacy registered [ 0.198628] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.198661] io scheduler noop registered (default) [ 0.198678] io scheduler deadline registered [ 0.198749] io scheduler cfq registered [ 0.205400] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.205444] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.214434] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 18, base_baud = 5000000) is a IMX [ 0.793680] console [ttymxc0] enabled [ 0.799173] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 55, base_baud = 5000000) is a IMX [ 0.842535] imx_rngc 2284000.rngb: Freescale RNGC registered. [ 0.848583] [drm] Initialized [ 0.886691] brd: module loaded [ 0.905691] loop: module loaded [ 0.913903] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 0.925328] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 0.938936] libphy: Fixed MDIO Bus: probed [ 0.945634] 20b4000.ethernet supply phy not found, using dummy regulator [ 0.953659] pps pps0: new PPS source ptp0 [ 0.986339] libphy: fec_enet_mii_bus: probed [ 0.992658] fec 20b4000.ethernet eth0: registered PHC device 0 [ 1.119990] 2188000.ethernet supply phy not found, using dummy regulator [ 1.241022] pps pps1: new PPS source ptp1 [ 1.246268] libphy: fec_enet_mii_bus: probed [ 1.254270] fec 2188000.ethernet eth1: registered PHC device 1 [ 1.260818] PPP generic driver version 2.4.2 [ 1.265614] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.272299] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.278118] usbcore: registered new interface driver usb-storage [ 1.284746] usbcore: registered new interface driver usbserial [ 1.290881] usbcore: registered new interface driver usbserial_generic [ 1.297540] usbserial: USB Serial support registered for generic [ 1.304211] mousedev: PS/2 mouse device common for all mice [ 1.355448] rtc rtc0: invalid alarm value: 2019-3-25 38:4:0 [ 1.361652] rtc-pcf8563 4-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 1.377747] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 [ 1.386868] i2c /dev entries driver [ 1.400304] lm75 4-0048: hwmon0: sensor 'lm75b' [ 1.521196] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.529446] sdhci: Secure Digital Host Controller Interface driver [ 1.535783] sdhci: Copyright(c) Pierre Ossman [ 1.540220] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.609961] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.629607] ledtrig-cpu: registered to indicate activity on CPUs [ 1.654145] usbcore: registered new interface driver usbhid [ 1.661904] usbhid: USB HID core driver [ 1.687508] NET: Registered protocol family 10 [ 1.694660] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.702512] NET: Registered protocol family 17 [ 1.707162] Key type dns_resolver registered [ 1.716391] Registering SWP/SWPB emulation handler [ 1.723283] registered taskstats version 1 [ 1.747665] imx_thermal 2000000.aips-bus:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 1.760759] random: fast init done [ 1.765260] mmc0: new DDR MMC card at address 0001 [ 1.782711] rtc-pcf8563 4-0051: setting system clock to 2019-02-28 16:47:08 UTC (1551372428) [ 1.791204] of_cfs_init [ 1.794561] mmcblk0: mmc0:0001 W62704 3.53 GiB [ 1.799481] mmcblk0boot0: mmc0:0001 W62704 partition 1 2.00 MiB [ 1.805868] mmcblk0boot1: mmc0:0001 W62704 partition 2 2.00 MiB [ 1.812179] of_cfs_init: OK [ 1.819820] vdd3p0: disabling [ 1.823289] mmcblk0rpmb: mmc0:0001 W62704 partition 3 512 KiB [ 1.832109] vref-3v3: disabling [ 1.835601] usb1_vbus: disabling [ 1.839047] usb2_vbus: disabling [ 1.842391] ALSA device list: [ 1.845370] No soundcards found. [ 1.848846] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 1.858218] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.867093] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.876604] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 1.884051] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 1.990632] EXT4-fs (mmcblk0p2): recovery complete [ 1.996902] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.005184] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.013012] devtmpfs: mounted [ 2.018025] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) [ 2.241456] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.270518] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.289602] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 2.330931] systemd[1]: Set hostname to . [ 2.907254] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 2.940294] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 2.972569] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 2.987013] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 3.030534] systemd[1]: dev-hugepages.mount: Couldn't determine result for ConditionVirtualization=!private-users, assuming failed: No such file or directory [ 3.045495] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 3.083823] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Reached target Encrypted Volumes. [ OK ] Created slice system-getty.slice. [ OK ] Listening on Journal Socket. Starting Journal Service... Starting Create list of required st…ce nodes for the current kernel... [ OK ] Created slice system-systemd\x2dfsck.slice. [ OK ] Listening on fsck to fsckd communication Socket. Starting File System Check on Root Device... [ OK ] Listening on udev Control Socket. Starting Load Kernel Modules... Mounting POSIX Message Queue File System... [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted /sys/kernel/config. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Load Kernel Modules. [ OK ] Started Journal Service. [ OK ] Started File System Check on Root Device. [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 3.914738] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro Starting Create Static Device Nodes in /dev... [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Apply Kernel Variables. Starting udev Coldplug all Devices... Starting Load/Save Random Seed... Starting Flush Journal to Persistent Storage... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Load/Save Random Seed. [ 4.294364] systemd-journald[142]: Received request to flush runtime journal from PID 1 Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started udev Kernel Device Manager. [ OK ] Started udev Coldplug all Devices. [ 5.770210] Driver for 1-wire Dallas network protocol. [ 5.817935] lirc_dev: IR Remote Control driver registered, major 245 [ 5.864224] lirc_pwm: module is from the staging directory, the quality is unknown, you have been warned. [ 5.971385] lirc_pwm lirc-rfm69: GPIO receiver on pin 77 [ OK ] Found device /dev/ttymxc0. [ 6.024053] lirc_pwm lirc-rfm69: lirc_dev: driver lirc-rfm69 registered at minor = 0 [ 6.073479] lirc_pwm lirc-rfm69: probed [ 6.115219] fec 20b4000.ethernet rename2: renamed from eth0 [ 6.575216] fec 2188000.ethernet eth0: renamed from eth1 [ 6.626039] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 6.660244] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 6.675458] fec 20b4000.ethernet eth1: renamed from rename2 [ 6.780026] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 6.860659] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.867515] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.874840] usb usb1: Product: EHCI Host Controller [ 6.879728] usb usb1: Manufacturer: Linux 4.9.22-wb6 ehci_hcd [ 6.885522] usb usb1: SerialNumber: ci_hdrc.0 [ 7.162210] hub 1-0:1.0: USB hub found [ 7.218207] hub 1-0:1.0: 1 port detected [ 7.292099] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 7.297059] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 7.400304] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 7.441665] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.448482] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.455880] usb usb2: Product: EHCI Host Controller [ 7.460808] usb usb2: Manufacturer: Linux 4.9.22-wb6 ehci_hcd [ 7.466563] usb usb2: SerialNumber: ci_hdrc.1 [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/mmcblk0p6. [ 7.753537] hub 2-0:1.0: USB hub found [ 7.780170] hub 2-0:1.0: 1 port detected [ 8.160048] usb 2-1: new high-speed USB device number 2 using ci_hdrc Starting File System Check on /dev/mmcblk0p6... Activating swap /dev/mmcblk0p5... [ 8.253180] Adding 262140k swap on /dev/mmcblk0p5. Priority:-1 extents:1 across:262140k SS [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ 8.390702] usb 2-1: New USB device found, idVendor=0424, idProduct=2514 [ 8.397457] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 8.413973] hub 2-1:1.0: USB hub found [ 8.418997] hub 2-1:1.0: 4 ports detected [ OK ] Started File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 8.587778] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /mnt/data. Starting prepare mounts and symlinks to config files... [ 8.750088] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 8.911576] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720 [ 8.918506] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.925978] usb 2-1.1: Product: 802.11n WLAN Adapter [ 8.930988] usb 2-1.1: Manufacturer: Realtek [ 8.935269] usb 2-1.1: SerialNumber: 00e04c000001 [ 9.100311] Bluetooth: Core ver 2.22 [ 9.104062] NET: Registered protocol family 31 [ 9.108518] Bluetooth: HCI device and connection manager initialized [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 9.168319] Bluetooth: HCI socket layer initialized [ 9.183980] Bluetooth: L2CAP socket layer initialized [ 9.191244] Bluetooth: SCO socket layer initialized [ 9.262655] usbcore: registered new interface driver btusb [ 9.272323] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 9.281126] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin [ 9.296725] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 9.306009] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin [ 9.312591] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin Starting Load/Save RF Kill Switch Status... [ 9.335004] Bluetooth: hci0: rom_version status=0 version=1 [ 9.341327] Bluetooth: cfg_sz 0, total size 22496 [ OK ] Started Load/Save RF Kill Switch Status. [ 9.706572] 8723bu: module is from the staging directory, the quality is unknown, you have been warned. [ 9.748604] RTL871X: module init start [ 9.752524] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 [ 9.759495] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ OK ] Started prepare mounts and symlinks to config files. [ 9.992067] RTL871X: rtw_ndev_init(wlan0) Starting Create Volatile Files and Directories... [ 10.018341] RTL871X: rtw_ndev_init(wlan1) [ 10.050318] usbcore: registered new interface driver rtl8723bu [ 10.056174] RTL871X: module init ret=0 [ OK ] Started Create Volatile Files and Directories. [ OK ] Reached target System Time Synchronized. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started Regular background program processing daemon. [ OK ] Started watch config files. Starting Bluetooth service... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Bluetooth service. [ 10.990573] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.995914] Bluetooth: BNEP filters: protocol multicast [ OK ] Reached target Bluetooth. [ 11.011711] Bluetooth: BNEP socket layer initialized [ OK ] Started Daily apt download activities. Starting LSB: Starts syslogd... [ OK ] Started Cgroup management daemon. Starting Login Service... [ OK ] Started Daily Cleanup of Temporary Directories. [ 11.200944] cgroup: new mount options do not match the existing superblock, will be ignored Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... Starting LSB: Hardware configuration with Device Tree overlays... Starting LSB: prepare partitions & rootfs... [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. Starting Mosquitto MQTT v3.1/v3.1.1 Broker... Starting LSB: Kernel 1-wire MQTT driver for WB-HomA... Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ OK ] Found device 802.11n_WLAN_Adapter. [ OK ] Started Mosquitto MQTT v3.1/v3.1.1 Broker. [ OK ] Started LSB: Kernel 1-wire MQTT driver for WB-HomA. [ OK ] Started LSB: Starts syslogd. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Login Service. Starting LSB: Starts klogd... Starting Hostname Service... Starting LSB: Firmware update monitor... Starting LSB: Configuration Editor Backend... Starting LSB: MQTT Rule Engine for Wiren Board... Starting LSB: : Wiren Board MQTT to Modbus TCP gateway... Starting LSB: MQTT driver for WB HomA for RFM69 ISM radio... Starting LSB: MQTT Driver for serial devices... Starting LSB: MQTT Driver for ADC... Starting LSB: : Wiren Board database logger... [ OK ] Started ifup for wlan0. [ OK ] Started Hostname Service. [ OK ] Started LSB: Configuration Editor Backend. [ OK ] Started LSB: Firmware update monitor. [ OK ] Started LSB: MQTT Rule Engine for Wiren Board. [ OK ] Started LSB: MQTT Driver for serial devices. [ OK ] Started LSB: : Wiren Board database logger. [ 16.322745] RTL871X: RTW_ADAPTIVITY_EN_[ 16.326468] AUTO, chplan:0x20, Regulation:3,3 [ 16.330956] RTL871X: RTW_ADAPTIVITY_MODE_[ 16.334827] NORMAL [ OK ] Started LSB: Starts klogd. [ 20.950008] random: crng init done [ 21.891764] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.633526] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 217, base_baud = 5000000) is a IMX [ 23.931411] RTL871X: nolinked power save enter [ OK ] Started LSB: : Wiren Board MQTT to Modbus TCP gateway. [ OK ] Started LSB: Hardware configuration with Device Tree overlays. Starting LSB: MQTT Driver for GPIO-controlled switches... [ OK ] Started LSB: prepare partitions & rootfs. Starting LSB: initscript to use GSM modem integrated RTC... [ OK ] Started LSB: initscript to use GSM modem integrated RTC. Starting Raise network interfaces... [ OK ] Started Raise network interfaces. [ OK ] Reached target Network. Starting OpenBSD Secure Shell server... Starting A high performance web server and a reverse proxy server... Starting Permit User Sessions... Starting dnsmasq - A lightweight DHCP and caching DNS server... [ OK ] Reached target Network is Online. Starting LSB: Advanced IEEE 802.11 management daemon... Starting LSB: Brings up/down network automatically... Starting LSB: Start NTP daemon... [ OK ] Started Permit User Sessions. [ OK ] Started LSB: MQTT Driver for ADC. [ 36.490344] SMSC LAN8710/LAN8720 2188000.ethernet:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1) [ 36.640475] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ OK ] Started OpenBSD Secure Shell server. [ 36.920733] Micrel KSZ8081 or KSZ8091 2188000.ethernet:03: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet:03, irq=-1) [ 37.060618] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttymxc0. [ OK ] Reached target Login Prompts. [ OK ] Started LSB: Start NTP daemon. Starting LSB: board-specific initscript... [ 38.811481] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ OK ] Started LSB: MQTT driver for WB HomA for RFM69 ISM radio. [ OK ] Started LSB: board-specific initscript. [ 40.160537] RTL871X: RTW_ADAPTIVITY_EN_[ 40.164282] AUTO, chplan:0x20, Regulation:3,3 [ 40.168650] RTL871X: RTW_ADAPTIVITY_MODE_[ 40.172615] NORMAL [ OK ] Started LSB: MQTT Driver for GPIO-controlled switches. [ 41.874967] RTL871X: nolinked power save leave [ 42.135804] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 42.566253] RTL871X: assoc success [ 42.570030] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Debian GNU/Linux 9 wirenboard-AQYLFZFK ttymxc0 wirenboard-AQYLFZFK login: root Password: Last login: Thu Feb 28 16:45:50 UTC 2019 on ttymxc0 Linux wirenboard-AQYLFZFK 4.9.22-wb6 #2 SMP Sat Jan 26 11:34:05 UTC 2019 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@wirenboard-AQYLFZFK:~# [ 98.653093] ad5064 1-0033: Failed to get supply 'vref': -19 [ 155.856263] ad5064 1-0043: Failed to get supply 'vref': -19