DEBUG: [storage] Open BDB storage at '/var/lib/wb-mqtt-serial/libwbmqtt.db'
DEBUG: [backend] emit StartEvent{}
DEBUG: [driver] Receive event StartEvent{}
INFO: [mqtt] connection estabilished with code "0" <success>
DEBUG: [mqtt] Publish '/wbretainhack/a73b409870de6dd03d184f88a7948ccf' payload: '2'
INFO: [mqtt] subscription succeeded (message id 1)
INFO: [mqtt] subscription succeeded (message id 2)
DEBUG: [backend] HandleMetaDriver topic: "/devices/wbrules/meta/driver" payload: "wb-rules"
DEBUG: [backend] HandleMetaDriver topic: "/devices/buzzer/meta/driver" payload: "wb-rules"
DEBUG: [backend] HandleMetaDriver topic: "/devices/network/meta/driver" payload: "wb-rules"
DEBUG: [backend] HandleMetaDriver topic: "/devices/power_status/meta/driver" payload: "wb-rules"
DEBUG: [backend] HandleMetaDriver topic: "/devices/hwmon/meta/driver" payload: "wb-rules"
DEBUG: [backend] HandleMetaDriver topic: "/devices/system/meta/driver" payload: "wb-rules"
DEBUG: [backend] HandleMetaDriver topic: "/devices/alarms/meta/driver" payload: "wb-rules"
DEBUG: [backend] HandleMetaDriver topic: "/devices/wb-adc/meta/driver" payload: "wb-adc"
DEBUG: [backend] HandleMetaDriver topic: "/devices/wb-gpio/meta/driver" payload: "wb-gpio"
DEBUG: [mqtt] /wbretainhack/a73b409870de6dd03d184f88a7948ccf payload: 2
DEBUG: [backend] emit ReadyEvent{}
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
WARNING: [serial] no devices defined for port </dev/ttyRS485-1 9600 8 N 2>. Skipping.
DEBUG: [serial port driver] setting up devices at </dev/ttyRS485-2 57600 8 N 1>
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [driver] waiting for transaction to complete
DEBUG: [tx 0X80563380] Open
DEBUG: [serial client] CreateDevice: optimus-911-m_1 (OPTIMUS 911 M) @ 1 -- protocol: modbus
DEBUG: [backend] create new local device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/meta/driver' payload: 'wb-modbus'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/meta/name' payload: 'OPTIMUS 911 M 1'
DEBUG: [backend] create control Controller type for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller type/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller type/meta/order' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller type/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller type/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller type' payload: '0'
DEBUG: [driver] Receive event ReadyEvent{}
DEBUG: [serial client] AddRegister: 0x805644a0
DEBUG: [storage] Get key 'optimus-911-m_1/Heater type' with value: '1'
DEBUG: [backend] create control Heater type for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Heater type/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Heater type/meta/order' payload: '2'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Heater type/meta/readonly' payload: '1'
DEBUG: [mqtt] Unsubscribe '/wbretainhack/a73b409870de6dd03d184f88a7948ccf'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Heater type/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Heater type' payload: '1'
DEBUG: [backend] HandleMetaDriver topic: "/devices/optimus-911-m_1/meta/driver" payload: "wb-modbus"
DEBUG: [serial client] AddRegister: 0x805658e8
DEBUG: [storage] Get key 'optimus-911-m_1/Software version' with value: '19'
DEBUG: [backend] create control Software version for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Software version/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Software version/meta/order' payload: '3'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Software version/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Software version/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Software version' payload: '19'
DEBUG: [serial client] AddRegister: 0x80556500
DEBUG: [storage] Get key 'optimus-911-m_1/Controller state' with value: '19'
DEBUG: [backend] create control Controller state for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller state/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller state/meta/order' payload: '4'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller state/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller state/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller state' payload: '19'
DEBUG: [serial client] AddRegister: 0x80557798
DEBUG: [backend] create control Remaining warm-up time for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining warm-up time/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining warm-up time/meta/order' payload: '5'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining warm-up time/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining warm-up time/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining warm-up time' payload: '0'
DEBUG: [serial client] AddRegister: 0x80557d50
DEBUG: [storage] Get key 'optimus-911-m_1/Temperature channel 1' with value: '-5'
DEBUG: [backend] create control Temperature channel 1 for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 1/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 1/meta/order' payload: '6'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 1/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 1/meta/type' payload: 'temperature'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 1' payload: '-5'
DEBUG: [serial client] AddRegister: 0x805584e8
DEBUG: [storage] Get key 'optimus-911-m_1/Temperature reverse water channel' with value: '-5'
DEBUG: [backend] create control Temperature reverse water channel for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature reverse water channel/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature reverse water channel/meta/order' payload: '7'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature reverse water channel/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature reverse water channel/meta/type' payload: 'temperature'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature reverse water channel' payload: '-5'
DEBUG: [serial client] AddRegister: 0x80558d48
DEBUG: [storage] Get key 'optimus-911-m_1/Temperature channel 3' with value: '-5'
DEBUG: [backend] create control Temperature channel 3 for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 3/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 3/meta/order' payload: '8'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 3/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 3/meta/type' payload: 'temperature'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 3' payload: '-5'
DEBUG: [serial client] AddRegister: 0x80559618
DEBUG: [storage] Get key 'optimus-911-m_1/Temperature channel 4' with value: '-5'
DEBUG: [backend] create control Temperature channel 4 for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 4/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 4/meta/order' payload: '9'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 4/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 4/meta/type' payload: 'temperature'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 4' payload: '-5'
DEBUG: [serial client] AddRegister: 0x80559fa8
DEBUG: [storage] Get key 'optimus-911-m_1/PWM 1' with value: '255'
DEBUG: [backend] create control PWM 1 for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 1/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 1/meta/order' payload: '10'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 1/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 1/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 1' payload: '255'
DEBUG: [serial client] AddRegister: 0x8055a850
DEBUG: [backend] create control PWM 2 for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 2/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 2/meta/order' payload: '11'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 2/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 2/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 2' payload: '0'
DEBUG: [serial client] AddRegister: 0x8055b068
DEBUG: [backend] create control PWM 3-4 for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 3-4/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 3-4/meta/order' payload: '12'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 3-4/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 3-4/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 3-4' payload: '0'
DEBUG: [serial client] AddRegister: 0x8055b998
DEBUG: [storage] Get key 'optimus-911-m_1/Purpose Y1' with value: '5'
DEBUG: [backend] create control Purpose Y1 for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y1/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y1/meta/order' payload: '13'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y1/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y1/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y1' payload: '5'
DEBUG: [serial client] AddRegister: 0x8055c0d8
DEBUG: [backend] create control Purpose Y2 for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y2/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y2/meta/order' payload: '14'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y2/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y2/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y2' payload: '0'
DEBUG: [serial client] AddRegister: 0x80536f00
DEBUG: [storage] Get key 'optimus-911-m_1/Purpose Y3' with value: '0'
DEBUG: [backend] create control Purpose Y3 for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y3/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y3/meta/order' payload: '15'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y3/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y3/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y3' payload: '0'
DEBUG: [serial client] AddRegister: 0x80537720
DEBUG: [backend] create control Purpose Y4 for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y4/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y4/meta/order' payload: '16'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y4/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y4/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y4' payload: '0'
DEBUG: [serial client] AddRegister: 0x80537ec0
DEBUG: [storage] Get key 'optimus-911-m_1/Remaining blowdown time' with value: '255'
DEBUG: [backend] create control Remaining blowdown time for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining blowdown time/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining blowdown time/meta/order' payload: '17'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining blowdown time/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining blowdown time/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining blowdown time' payload: '255'
DEBUG: [serial client] AddRegister: 0x80538630
DEBUG: [storage] Get key 'optimus-911-m_1/Maximum temperature limit' with value: '40'
DEBUG: [backend] create control Maximum temperature limit for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Maximum temperature limit/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Maximum temperature limit/meta/order' payload: '18'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Maximum temperature limit/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Maximum temperature limit/meta/type' payload: 'temperature'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Maximum temperature limit' payload: '40'
DEBUG: [serial client] AddRegister: 0x80538fd0
DEBUG: [storage] Get key 'optimus-911-m_1/ID' with value: '34572'
DEBUG: [backend] create control ID for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ID/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ID/meta/order' payload: '19'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ID/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ID/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ID' payload: '34572'
DEBUG: [serial client] AddRegister: 0x80539850
DEBUG: [backend] create control Remaining defrost time for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining defrost time/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining defrost time/meta/order' payload: '20'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining defrost time/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining defrost time/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining defrost time' payload: '0'
DEBUG: [serial client] AddRegister: 0x80539ee8
DEBUG: [backend] create control PWM electric heater for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM electric heater/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM electric heater/meta/order' payload: '21'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM electric heater/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM electric heater/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM electric heater' payload: '0'
DEBUG: [serial client] AddRegister: 0x8053a6e0
DEBUG: [storage] Get key 'optimus-911-m_1/ADC A' with value: '1836.102374323'
DEBUG: [backend] create control ADC A for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC A/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC A/meta/order' payload: '22'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC A/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC A/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC A' payload: '1836.102374323'
DEBUG: [serial client] AddRegister: 0x8053af80
DEBUG: [storage] Get key 'optimus-911-m_1/ADC B' with value: '1073.346463777'
DEBUG: [backend] create control ADC B for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC B/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC B/meta/order' payload: '23'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC B/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC B/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC B' payload: '1073.346463777'
DEBUG: [serial client] AddRegister: 0x8053b828
DEBUG: [storage] Get key 'optimus-911-m_1/ADC C' with value: '401.18110501'
DEBUG: [backend] create control ADC C for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC C/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC C/meta/order' payload: '24'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC C/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC C/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC C' payload: '401.18110501'
DEBUG: [serial client] AddRegister: 0x8053c110
DEBUG: [storage] Get key 'optimus-911-m_1/Bits bullshit' with value: '1024'
DEBUG: [backend] create control Bits bullshit for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Bits bullshit/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Bits bullshit/meta/order' payload: '25'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Bits bullshit/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Bits bullshit/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Bits bullshit' payload: '1024'
DEBUG: [serial client] AddRegister: 0x8053c858
DEBUG: [storage] Get key 'optimus-911-m_1/Temperature warm-up' with value: '57'
DEBUG: [backend] create control Temperature warm-up for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature warm-up/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature warm-up/meta/order' payload: '26'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature warm-up/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature warm-up/meta/type' payload: 'temperature'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature warm-up' payload: '57'
DEBUG: [serial client] AddRegister: 0x8053cf58
DEBUG: [storage] Get key 'optimus-911-m_1/Minimum speed %' with value: '40'
DEBUG: [backend] create control Minimum speed % for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Minimum speed %/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Minimum speed %/meta/order' payload: '27'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Minimum speed %/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Minimum speed %/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Minimum speed %' payload: '40'
DEBUG: [serial client] AddRegister: 0x8053d838
DEBUG: [storage] Get key 'optimus-911-m_1/Power 1-2' with value: '257'
DEBUG: [backend] create control Power 1-2 for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 1-2/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 1-2/meta/order' payload: '28'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 1-2/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 1-2/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 1-2' payload: '257'
DEBUG: [serial client] AddRegister: 0x8053e080
DEBUG: [storage] Get key 'optimus-911-m_1/T15 ERR or T7 WRR target' with value: '1'
DEBUG: [backend] create control T15 ERR or T7 WRR target for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/T15 ERR or T7 WRR target/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/T15 ERR or T7 WRR target/meta/order' payload: '29'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/T15 ERR or T7 WRR target/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/T15 ERR or T7 WRR target/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/T15 ERR or T7 WRR target' payload: '1'
DEBUG: [serial client] AddRegister: 0x8053e7e8
DEBUG: [backend] create control Power 3-4 for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 3-4/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 3-4/meta/order' payload: '30'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 3-4/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 3-4/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 3-4' payload: '0'
DEBUG: [serial client] AddRegister: 0x8053ef80
DEBUG: [backend] create control PWM Water for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM Water/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM Water/meta/order' payload: '31'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM Water/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM Water/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM Water' payload: '0'
DEBUG: [serial client] AddRegister: 0x8053f750
DEBUG: [backend] create control Remaining time to next mode for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining time to next mode/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining time to next mode/meta/order' payload: '32'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining time to next mode/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining time to next mode/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining time to next mode' payload: '0'
DEBUG: [serial client] AddRegister: 0x8053fd88
DEBUG: [storage] Get key 'optimus-911-m_1/Sensor 3 type' with value: '1'
DEBUG: [backend] create control Sensor 3 type for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 3 type/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 3 type/meta/order' payload: '33'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 3 type/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 3 type/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 3 type' payload: '1'
DEBUG: [serial client] AddRegister: 0x805406d8
DEBUG: [storage] Get key 'optimus-911-m_1/Sensor 4 type' with value: '1'
DEBUG: [backend] create control Sensor 4 type for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 4 type/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 4 type/meta/order' payload: '34'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 4 type/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 4 type/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 4 type' payload: '1'
DEBUG: [serial client] AddRegister: 0x80540f80
DEBUG: [storage] Get key 'optimus-911-m_1/Refrigerant type' with value: '1'
DEBUG: [backend] create control Refrigerant type for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Refrigerant type/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Refrigerant type/meta/order' payload: '35'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Refrigerant type/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Refrigerant type/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Refrigerant type' payload: '1'
DEBUG: [serial client] AddRegister: 0x805416f8
DEBUG: [storage] Get key 'optimus-911-m_1/Recuperator type' with value: '1'
DEBUG: [backend] create control Recuperator type for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recuperator type/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recuperator type/meta/order' payload: '36'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recuperator type/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recuperator type/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recuperator type' payload: '1'
DEBUG: [serial client] AddRegister: 0x80541f58
DEBUG: [storage] Get key 'optimus-911-m_1/Recirculation type' with value: '1'
DEBUG: [backend] create control Recirculation type for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recirculation type/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recirculation type/meta/order' payload: '37'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recirculation type/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recirculation type/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recirculation type' payload: '1'
DEBUG: [serial client] AddRegister: 0x80542738
DEBUG: [storage] Get key 'optimus-911-m_1/Speed configuration' with value: '1'
DEBUG: [backend] create control Speed configuration for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Speed configuration/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Speed configuration/meta/order' payload: '38'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Speed configuration/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Speed configuration/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Speed configuration' payload: '1'
DEBUG: [serial client] AddRegister: 0x80542fc0
DEBUG: [backend] create control Power limit for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power limit/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power limit/meta/order' payload: '39'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power limit/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power limit/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power limit' payload: '0'
DEBUG: [serial client] AddRegister: 0x80543888
DEBUG: [backend] create control Humidity for device optimus-911-m_1
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Humidity/meta/error' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Humidity/meta/order' payload: '40'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Humidity/meta/readonly' payload: '1'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Humidity/meta/type' payload: 'value'
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Humidity' payload: '0'
DEBUG: [serial client] AddRegister: 0x80543e48
DEBUG: [tx 0X80563380] Close
DEBUG: [signal handling] Waiting for signals...
DEBUG: [modbus] Adding range: 1 input(s) @ 1 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 2 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 3 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 4 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 5 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 6 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 7 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 8 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 9 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 10 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 11 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 12 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 13 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 14 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 15 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 15 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 16 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 17 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 19 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 20 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 21 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 22 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 23 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 24 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 25 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 26 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 27 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 28 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 29 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 30 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 30 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 32 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 33 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 34 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 35 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 36 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 36 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 37 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 38 of device modbus:1
DEBUG: [modbus] Adding range: 1 input(s) @ 38 of device modbus:1
DEBUG: [port] Sleep 20000 us
DEBUG: [modbus] read 1 input(s) @ 1 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 01 00 01 60 0a
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 1> <- 0
DEBUG: [serial port driver] channel 'Controller type' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 2 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 02 00 01 90 0a
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [register handler] new val for <modbus:1:input: 2>: 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 2> <- 1
DEBUG: [serial port driver] channel 'Heater type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 3 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 03 00 01 c1 ca
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 13 f8 fd
DEBUG: [register handler] new val for <modbus:1:input: 3>: 13
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 3> <- 19
DEBUG: [serial port driver] channel 'Software version' of device 'optimus-911-m_1' <-- 19
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 4 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 04 00 01 70 0b
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 13 f8 fd
DEBUG: [register handler] new val for <modbus:1:input: 4>: 13
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 4> <- 19
DEBUG: [serial port driver] channel 'Controller state' of device 'optimus-911-m_1' <-- 19
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 5 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 05 00 01 21 cb
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 5> <- 0
DEBUG: [serial port driver] channel 'Remaining warm-up time' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 6 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 06 00 01 d1 cb
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [register handler] new val for <modbus:1:input: 6>: 19
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 6> <- -5
DEBUG: [serial port driver] channel 'Temperature channel 1' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 7 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 07 00 01 80 0b
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [register handler] new val for <modbus:1:input: 7>: 19
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 7> <- -5
DEBUG: [serial port driver] channel 'Temperature reverse water channel' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 8 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 08 00 01 b0 08
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [register handler] new val for <modbus:1:input: 8>: 19
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 8> <- -5
DEBUG: [serial port driver] channel 'Temperature channel 3' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 9 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 09 00 01 e1 c8
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [register handler] new val for <modbus:1:input: 9>: 19
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 9> <- -5
DEBUG: [serial port driver] channel 'Temperature channel 4' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 10 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0a 00 01 11 c8
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 ff f9 70
DEBUG: [register handler] new val for <modbus:1:input: 10>: ff
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 10> <- 255
DEBUG: [serial port driver] channel 'PWM 1' of device 'optimus-911-m_1' <-- 255
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 11 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0b 00 01 40 08
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 11> <- 0
DEBUG: [serial port driver] channel 'PWM 2' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 12 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0c 00 01 f1 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 12> <- 0
DEBUG: [serial port driver] channel 'PWM 3-4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 13 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0d 00 01 a0 09
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 05 79 33
DEBUG: [register handler] new val for <modbus:1:input: 13>: 5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 13> <- 5
DEBUG: [serial port driver] channel 'Purpose Y1' of device 'optimus-911-m_1' <-- 5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 14 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0e 00 01 50 09
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 14> <- 0
DEBUG: [serial port driver] channel 'Purpose Y2' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 15 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0f 00 01 01 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 15> <- 0
DEBUG: [serial port driver] channel 'Purpose Y3' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 15 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0f 00 01 01 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 15> <- 0
DEBUG: [serial port driver] channel 'Purpose Y4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 16 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 10 00 01 30 0f
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 ff f9 70
DEBUG: [register handler] new val for <modbus:1:input: 16>: ff
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 16> <- 255
DEBUG: [serial port driver] channel 'Remaining blowdown time' of device 'optimus-911-m_1' <-- 255
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 17 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 11 00 01 61 cf
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 46 38 c2
DEBUG: [register handler] new val for <modbus:1:input: 17>: 46
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 17> <- 40
DEBUG: [serial port driver] channel 'Maximum temperature limit' of device 'optimus-911-m_1' <-- 40
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 19 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 13 00 01 c0 0f
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 87 0c da c5
DEBUG: [register handler] new val for <modbus:1:input: 19>: 870c
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 19> <- 34572
DEBUG: [serial port driver] channel 'ID' of device 'optimus-911-m_1' <-- 34572
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 20 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 14 00 01 71 ce
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 20> <- 0
DEBUG: [serial port driver] channel 'Remaining defrost time' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 21 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 15 00 01 20 0e
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 21> <- 0
DEBUG: [serial port driver] channel 'PWM electric heater' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 22 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 16 00 01 d0 0e
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 b6 2d 0f 4d
DEBUG: [register handler] new val for <modbus:1:input: 22>: b62d
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 22> <- 1836.102374323
DEBUG: [serial port driver] channel 'ADC A' of device 'optimus-911-m_1' <-- 1836.102374323
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 23 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 17 00 01 81 ce
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 6a 7f d6 70
DEBUG: [register handler] new val for <modbus:1:input: 23>: 6a7f
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 23> <- 1073.346463777
DEBUG: [serial port driver] channel 'ADC B' of device 'optimus-911-m_1' <-- 1073.346463777
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 24 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 18 00 01 b1 cd
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 27 ce 23 54
DEBUG: [register handler] new val for <modbus:1:input: 24>: 27ce
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 24> <- 401.18110501
DEBUG: [serial port driver] channel 'ADC C' of device 'optimus-911-m_1' <-- 401.18110501
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 25 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 19 00 01 e0 0d
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 04 00 bb f0
DEBUG: [register handler] new val for <modbus:1:input: 25>: 400
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 25> <- 1024
DEBUG: [serial port driver] channel 'Bits bullshit' of device 'optimus-911-m_1' <-- 1024
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 26 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1a 00 01 10 0d
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 57 f8 ce
DEBUG: [register handler] new val for <modbus:1:input: 26>: 57
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 26> <- 57
DEBUG: [serial port driver] channel 'Temperature warm-up' of device 'optimus-911-m_1' <-- 57
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 27 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1b 00 01 41 cd
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 28 b9 2e
DEBUG: [register handler] new val for <modbus:1:input: 27>: 28
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 27> <- 40
DEBUG: [serial port driver] channel 'Minimum speed %' of device 'optimus-911-m_1' <-- 40
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 28 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1c 00 01 f0 0c
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 01 01 79 60
DEBUG: [register handler] new val for <modbus:1:input: 28>: 101
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 28> <- 257
DEBUG: [serial port driver] channel 'Power 1-2' of device 'optimus-911-m_1' <-- 257
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 29 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1d 00 01 a1 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [register handler] new val for <modbus:1:input: 29>: 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 29> <- 1
DEBUG: [serial port driver] channel 'T15 ERR or T7 WRR target' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 30 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1e 00 01 51 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 30> <- 0
DEBUG: [serial port driver] channel 'Power 3-4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 30 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1e 00 01 51 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 30> <- 0
DEBUG: [serial port driver] channel 'PWM Water' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 32 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 20 00 01 30 00
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 32> <- 0
DEBUG: [serial port driver] channel 'Remaining time to next mode' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 33 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 21 00 01 61 c0
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [register handler] new val for <modbus:1:input: 33>: 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 33> <- 1
DEBUG: [serial port driver] channel 'Sensor 3 type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 34 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 22 00 01 91 c0
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [register handler] new val for <modbus:1:input: 34>: 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 34> <- 1
DEBUG: [serial port driver] channel 'Sensor 4 type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 35 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 23 00 01 c0 00
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [register handler] new val for <modbus:1:input: 35>: 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 35> <- 1
DEBUG: [serial port driver] channel 'Refrigerant type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 36 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 24 00 01 71 c1
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [register handler] new val for <modbus:1:input: 36>: 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 36> <- 1
DEBUG: [serial port driver] channel 'Recuperator type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 36 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 24 00 01 71 c1
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [register handler] new val for <modbus:1:input: 36>: 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 36> <- 1
DEBUG: [serial port driver] channel 'Recirculation type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 37 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 25 00 01 20 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [register handler] new val for <modbus:1:input: 37>: 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 37> <- 1
DEBUG: [serial port driver] channel 'Speed configuration' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 38 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 26 00 01 d0 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 38> <- 0
DEBUG: [serial port driver] channel 'Power limit' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 38 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 26 00 01 d0 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [serial port driver] register value change: <modbus:1:input: 38> <- 0
DEBUG: [serial port driver] channel 'Humidity' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
INFO: [serial client] device modbus:1 is connected
DEBUG: [modbus] read 1 input(s) @ 1 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 01 00 01 60 0a
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Controller type' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 2 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 02 00 01 90 0a
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Heater type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 3 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 03 00 01 c1 ca
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 13 f8 fd
DEBUG: [serial port driver] channel 'Software version' of device 'optimus-911-m_1' <-- 19
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 4 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 04 00 01 70 0b
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 13 f8 fd
DEBUG: [serial port driver] channel 'Controller state' of device 'optimus-911-m_1' <-- 19
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 5 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 05 00 01 21 cb
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Remaining warm-up time' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 6 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 06 00 01 d1 cb
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature channel 1' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 7 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 07 00 01 80 0b
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature reverse water channel' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 8 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 08 00 01 b0 08
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature channel 3' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 9 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 09 00 01 e1 c8
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature channel 4' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 10 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0a 00 01 11 c8
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 ff f9 70
DEBUG: [serial port driver] channel 'PWM 1' of device 'optimus-911-m_1' <-- 255
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 11 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0b 00 01 40 08
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM 2' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 12 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0c 00 01 f1 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM 3-4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 13 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0d 00 01 a0 09
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 05 79 33
DEBUG: [serial port driver] channel 'Purpose Y1' of device 'optimus-911-m_1' <-- 5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 14 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0e 00 01 50 09
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Purpose Y2' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 15 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0f 00 01 01 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Purpose Y3' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 15 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0f 00 01 01 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Purpose Y4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 16 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 10 00 01 30 0f
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 ff f9 70
DEBUG: [serial port driver] channel 'Remaining blowdown time' of device 'optimus-911-m_1' <-- 255
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 17 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 11 00 01 61 cf
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 46 38 c2
DEBUG: [serial port driver] channel 'Maximum temperature limit' of device 'optimus-911-m_1' <-- 40
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 19 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 13 00 01 c0 0f
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 87 0c da c5
DEBUG: [serial port driver] channel 'ID' of device 'optimus-911-m_1' <-- 34572
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 20 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 14 00 01 71 ce
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Remaining defrost time' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 21 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 15 00 01 20 0e
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM electric heater' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 22 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 16 00 01 d0 0e
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 b6 2d 0f 4d
DEBUG: [serial port driver] channel 'ADC A' of device 'optimus-911-m_1' <-- 1836.102374323
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 23 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 17 00 01 81 ce
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 6a 7f d6 70
DEBUG: [serial port driver] channel 'ADC B' of device 'optimus-911-m_1' <-- 1073.346463777
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 24 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 18 00 01 b1 cd
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 27 ce 23 54
DEBUG: [serial port driver] channel 'ADC C' of device 'optimus-911-m_1' <-- 401.18110501
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 25 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 19 00 01 e0 0d
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 04 00 bb f0
DEBUG: [serial port driver] channel 'Bits bullshit' of device 'optimus-911-m_1' <-- 1024
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 26 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1a 00 01 10 0d
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 57 f8 ce
DEBUG: [serial port driver] channel 'Temperature warm-up' of device 'optimus-911-m_1' <-- 57
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 27 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1b 00 01 41 cd
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 28 b9 2e
DEBUG: [serial port driver] channel 'Minimum speed %' of device 'optimus-911-m_1' <-- 40
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 28 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1c 00 01 f0 0c
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 01 01 79 60
DEBUG: [serial port driver] channel 'Power 1-2' of device 'optimus-911-m_1' <-- 257
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 29 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1d 00 01 a1 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'T15 ERR or T7 WRR target' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 30 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1e 00 01 51 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Power 3-4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 30 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1e 00 01 51 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM Water' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 32 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 20 00 01 30 00
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Remaining time to next mode' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 33 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 21 00 01 61 c0
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Sensor 3 type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 34 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 22 00 01 91 c0
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Sensor 4 type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 35 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 23 00 01 c0 00
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Refrigerant type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 36 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 24 00 01 71 c1
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Recuperator type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 36 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 24 00 01 71 c1
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Recirculation type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 37 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 25 00 01 20 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Speed configuration' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 38 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 26 00 01 d0 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Power limit' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 38 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 26 00 01 d0 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Humidity' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 1 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 01 00 01 60 0a
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Controller type' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 2 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 02 00 01 90 0a
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Heater type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 3 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 03 00 01 c1 ca
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 13 f8 fd
DEBUG: [serial port driver] channel 'Software version' of device 'optimus-911-m_1' <-- 19
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 4 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 04 00 01 70 0b
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 13 f8 fd
DEBUG: [serial port driver] channel 'Controller state' of device 'optimus-911-m_1' <-- 19
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 5 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 05 00 01 21 cb
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Remaining warm-up time' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 6 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 06 00 01 d1 cb
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature channel 1' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 7 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 07 00 01 80 0b
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature reverse water channel' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 8 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 08 00 01 b0 08
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature channel 3' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 9 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 09 00 01 e1 c8
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature channel 4' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 10 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0a 00 01 11 c8
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 ff f9 70
DEBUG: [serial port driver] channel 'PWM 1' of device 'optimus-911-m_1' <-- 255
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 11 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0b 00 01 40 08
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM 2' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 12 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0c 00 01 f1 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM 3-4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 13 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0d 00 01 a0 09
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 05 79 33
DEBUG: [serial port driver] channel 'Purpose Y1' of device 'optimus-911-m_1' <-- 5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 14 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0e 00 01 50 09
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Purpose Y2' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 15 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0f 00 01 01 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Purpose Y3' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 15 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0f 00 01 01 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Purpose Y4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 16 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 10 00 01 30 0f
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 ff f9 70
DEBUG: [serial port driver] channel 'Remaining blowdown time' of device 'optimus-911-m_1' <-- 255
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 17 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 11 00 01 61 cf
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 46 38 c2
DEBUG: [serial port driver] channel 'Maximum temperature limit' of device 'optimus-911-m_1' <-- 40
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 19 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 13 00 01 c0 0f
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 87 0c da c5
DEBUG: [serial port driver] channel 'ID' of device 'optimus-911-m_1' <-- 34572
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 20 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 14 00 01 71 ce
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Remaining defrost time' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 21 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 15 00 01 20 0e
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM electric heater' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 22 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 16 00 01 d0 0e
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 b6 2d 0f 4d
DEBUG: [serial port driver] channel 'ADC A' of device 'optimus-911-m_1' <-- 1836.102374323
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 23 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 17 00 01 81 ce
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 6a 7f d6 70
DEBUG: [serial port driver] channel 'ADC B' of device 'optimus-911-m_1' <-- 1073.346463777
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 24 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 18 00 01 b1 cd
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 27 ce 23 54
DEBUG: [serial port driver] channel 'ADC C' of device 'optimus-911-m_1' <-- 401.18110501
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 25 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 19 00 01 e0 0d
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 04 00 bb f0
DEBUG: [serial port driver] channel 'Bits bullshit' of device 'optimus-911-m_1' <-- 1024
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 26 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1a 00 01 10 0d
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 57 f8 ce
DEBUG: [serial port driver] channel 'Temperature warm-up' of device 'optimus-911-m_1' <-- 57
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 27 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1b 00 01 41 cd
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 28 b9 2e
DEBUG: [serial port driver] channel 'Minimum speed %' of device 'optimus-911-m_1' <-- 40
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 28 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1c 00 01 f0 0c
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 01 01 79 60
DEBUG: [serial port driver] channel 'Power 1-2' of device 'optimus-911-m_1' <-- 257
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 29 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1d 00 01 a1 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'T15 ERR or T7 WRR target' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 30 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1e 00 01 51 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Power 3-4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 30 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1e 00 01 51 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM Water' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 32 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 20 00 01 30 00
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Remaining time to next mode' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 33 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 21 00 01 61 c0
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Sensor 3 type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 34 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 22 00 01 91 c0
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Sensor 4 type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 35 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 23 00 01 c0 00
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Refrigerant type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 36 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 24 00 01 71 c1
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Recuperator type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 36 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 24 00 01 71 c1
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Recirculation type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 37 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 25 00 01 20 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Speed configuration' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 38 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 26 00 01 d0 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Power limit' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 38 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 26 00 01 d0 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Humidity' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 1 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 01 00 01 60 0a
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Controller type' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 2 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 02 00 01 90 0a
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Heater type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 3 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 03 00 01 c1 ca
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 13 f8 fd
DEBUG: [serial port driver] channel 'Software version' of device 'optimus-911-m_1' <-- 19
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 4 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 04 00 01 70 0b
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 13 f8 fd
DEBUG: [serial port driver] channel 'Controller state' of device 'optimus-911-m_1' <-- 19
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 5 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 05 00 01 21 cb
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Remaining warm-up time' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 6 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 06 00 01 d1 cb
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature channel 1' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 7 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 07 00 01 80 0b
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature reverse water channel' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 8 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 08 00 01 b0 08
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature channel 3' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 9 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 09 00 01 e1 c8
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature channel 4' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 10 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0a 00 01 11 c8
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 ff f9 70
DEBUG: [serial port driver] channel 'PWM 1' of device 'optimus-911-m_1' <-- 255
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 11 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0b 00 01 40 08
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM 2' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 12 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0c 00 01 f1 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM 3-4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 13 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0d 00 01 a0 09
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 05 79 33
DEBUG: [serial port driver] channel 'Purpose Y1' of device 'optimus-911-m_1' <-- 5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 14 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0e 00 01 50 09
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Purpose Y2' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 15 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0f 00 01 01 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Purpose Y3' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 15 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0f 00 01 01 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Purpose Y4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 16 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 10 00 01 30 0f
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 ff f9 70
DEBUG: [serial port driver] channel 'Remaining blowdown time' of device 'optimus-911-m_1' <-- 255
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 17 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 11 00 01 61 cf
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 46 38 c2
DEBUG: [serial port driver] channel 'Maximum temperature limit' of device 'optimus-911-m_1' <-- 40
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 19 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 13 00 01 c0 0f
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 87 0c da c5
DEBUG: [serial port driver] channel 'ID' of device 'optimus-911-m_1' <-- 34572
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 20 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 14 00 01 71 ce
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Remaining defrost time' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 21 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 15 00 01 20 0e
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM electric heater' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 22 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 16 00 01 d0 0e
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 b6 2d 0f 4d
DEBUG: [serial port driver] channel 'ADC A' of device 'optimus-911-m_1' <-- 1836.102374323
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 23 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 17 00 01 81 ce
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 6a 7f d6 70
DEBUG: [serial port driver] channel 'ADC B' of device 'optimus-911-m_1' <-- 1073.346463777
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 24 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 18 00 01 b1 cd
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 27 ce 23 54
DEBUG: [serial port driver] channel 'ADC C' of device 'optimus-911-m_1' <-- 401.18110501
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 25 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 19 00 01 e0 0d
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 04 00 bb f0
DEBUG: [serial port driver] channel 'Bits bullshit' of device 'optimus-911-m_1' <-- 1024
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 26 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1a 00 01 10 0d
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 57 f8 ce
DEBUG: [serial port driver] channel 'Temperature warm-up' of device 'optimus-911-m_1' <-- 57
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 27 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1b 00 01 41 cd
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 28 b9 2e
DEBUG: [serial port driver] channel 'Minimum speed %' of device 'optimus-911-m_1' <-- 40
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 28 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1c 00 01 f0 0c
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 01 01 79 60
DEBUG: [serial port driver] channel 'Power 1-2' of device 'optimus-911-m_1' <-- 257
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 29 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1d 00 01 a1 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'T15 ERR or T7 WRR target' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 30 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1e 00 01 51 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Power 3-4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 30 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1e 00 01 51 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM Water' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 32 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 20 00 01 30 00
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Remaining time to next mode' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 33 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 21 00 01 61 c0
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Sensor 3 type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 34 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 22 00 01 91 c0
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Sensor 4 type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 35 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 23 00 01 c0 00
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Refrigerant type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 36 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 24 00 01 71 c1
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Recuperator type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 36 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 24 00 01 71 c1
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Recirculation type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 37 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 25 00 01 20 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Speed configuration' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 38 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 26 00 01 d0 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Power limit' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 38 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 26 00 01 d0 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Humidity' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 1 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 01 00 01 60 0a
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Controller type' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 2 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 02 00 01 90 0a
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Heater type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 3 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 03 00 01 c1 ca
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 13 f8 fd
DEBUG: [serial port driver] channel 'Software version' of device 'optimus-911-m_1' <-- 19
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 4 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 04 00 01 70 0b
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 13 f8 fd
DEBUG: [serial port driver] channel 'Controller state' of device 'optimus-911-m_1' <-- 19
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 5 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 05 00 01 21 cb
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Remaining warm-up time' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 6 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 06 00 01 d1 cb
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature channel 1' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 7 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 07 00 01 80 0b
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature reverse water channel' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 8 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 08 00 01 b0 08
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature channel 3' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 9 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 09 00 01 e1 c8
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature channel 4' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 10 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0a 00 01 11 c8
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 ff f9 70
DEBUG: [serial port driver] channel 'PWM 1' of device 'optimus-911-m_1' <-- 255
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 11 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0b 00 01 40 08
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM 2' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 12 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0c 00 01 f1 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM 3-4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 13 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0d 00 01 a0 09
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 05 79 33
DEBUG: [serial port driver] channel 'Purpose Y1' of device 'optimus-911-m_1' <-- 5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 14 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0e 00 01 50 09
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Purpose Y2' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 15 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0f 00 01 01 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Purpose Y3' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 15 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0f 00 01 01 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Purpose Y4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 16 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 10 00 01 30 0f
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 ff f9 70
DEBUG: [serial port driver] channel 'Remaining blowdown time' of device 'optimus-911-m_1' <-- 255
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 17 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 11 00 01 61 cf
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 46 38 c2
DEBUG: [serial port driver] channel 'Maximum temperature limit' of device 'optimus-911-m_1' <-- 40
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 19 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 13 00 01 c0 0f
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 87 0c da c5
DEBUG: [serial port driver] channel 'ID' of device 'optimus-911-m_1' <-- 34572
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 20 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 14 00 01 71 ce
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Remaining defrost time' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 21 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 15 00 01 20 0e
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM electric heater' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 22 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 16 00 01 d0 0e
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 b6 2d 0f 4d
DEBUG: [serial port driver] channel 'ADC A' of device 'optimus-911-m_1' <-- 1836.102374323
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 23 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 17 00 01 81 ce
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 6a 7f d6 70
DEBUG: [serial port driver] channel 'ADC B' of device 'optimus-911-m_1' <-- 1073.346463777
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 24 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 18 00 01 b1 cd
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 27 ce 23 54
DEBUG: [serial port driver] channel 'ADC C' of device 'optimus-911-m_1' <-- 401.18110501
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 25 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 19 00 01 e0 0d
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 04 00 bb f0
DEBUG: [serial port driver] channel 'Bits bullshit' of device 'optimus-911-m_1' <-- 1024
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 26 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1a 00 01 10 0d
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 57 f8 ce
DEBUG: [serial port driver] channel 'Temperature warm-up' of device 'optimus-911-m_1' <-- 57
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 27 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1b 00 01 41 cd
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 28 b9 2e
DEBUG: [serial port driver] channel 'Minimum speed %' of device 'optimus-911-m_1' <-- 40
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 28 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1c 00 01 f0 0c
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 01 01 79 60
DEBUG: [serial port driver] channel 'Power 1-2' of device 'optimus-911-m_1' <-- 257
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 29 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1d 00 01 a1 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'T15 ERR or T7 WRR target' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 30 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1e 00 01 51 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Power 3-4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 30 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1e 00 01 51 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM Water' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 32 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 20 00 01 30 00
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Remaining time to next mode' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 33 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 21 00 01 61 c0
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Sensor 3 type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 34 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 22 00 01 91 c0
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Sensor 4 type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 35 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 23 00 01 c0 00
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Refrigerant type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 36 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 24 00 01 71 c1
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Recuperator type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 36 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 24 00 01 71 c1
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Recirculation type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 37 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 25 00 01 20 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Speed configuration' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 38 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 26 00 01 d0 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Power limit' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 38 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 26 00 01 d0 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Humidity' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 1 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 01 00 01 60 0a
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Controller type' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 2 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 02 00 01 90 0a
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Heater type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 3 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 03 00 01 c1 ca
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 13 f8 fd
DEBUG: [serial port driver] channel 'Software version' of device 'optimus-911-m_1' <-- 19
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 4 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 04 00 01 70 0b
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 13 f8 fd
DEBUG: [serial port driver] channel 'Controller state' of device 'optimus-911-m_1' <-- 19
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 5 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 05 00 01 21 cb
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Remaining warm-up time' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 6 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 06 00 01 d1 cb
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature channel 1' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 7 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 07 00 01 80 0b
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature reverse water channel' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 8 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 08 00 01 b0 08
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature channel 3' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 9 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 09 00 01 e1 c8
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 19 78 fa
DEBUG: [serial port driver] channel 'Temperature channel 4' of device 'optimus-911-m_1' <-- -5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 10 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0a 00 01 11 c8
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 ff f9 70
DEBUG: [serial port driver] channel 'PWM 1' of device 'optimus-911-m_1' <-- 255
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 11 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0b 00 01 40 08
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM 2' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 12 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0c 00 01 f1 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM 3-4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 13 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0d 00 01 a0 09
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 05 79 33
DEBUG: [serial port driver] channel 'Purpose Y1' of device 'optimus-911-m_1' <-- 5
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 14 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0e 00 01 50 09
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Purpose Y2' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 15 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0f 00 01 01 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Purpose Y3' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 15 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 0f 00 01 01 c9
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Purpose Y4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 16 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 10 00 01 30 0f
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 ff f9 70
DEBUG: [serial port driver] channel 'Remaining blowdown time' of device 'optimus-911-m_1' <-- 255
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 17 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 11 00 01 61 cf
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 46 38 c2
DEBUG: [serial port driver] channel 'Maximum temperature limit' of device 'optimus-911-m_1' <-- 40
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 19 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 13 00 01 c0 0f
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 87 0c da c5
DEBUG: [serial port driver] channel 'ID' of device 'optimus-911-m_1' <-- 34572
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 20 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 14 00 01 71 ce
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Remaining defrost time' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 21 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 15 00 01 20 0e
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM electric heater' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 22 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 16 00 01 d0 0e
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 b6 2d 0f 4d
DEBUG: [serial port driver] channel 'ADC A' of device 'optimus-911-m_1' <-- 1836.102374323
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 23 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 17 00 01 81 ce
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 6a 7f d6 70
DEBUG: [serial port driver] channel 'ADC B' of device 'optimus-911-m_1' <-- 1073.346463777
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 24 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 18 00 01 b1 cd
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 27 ce 23 54
DEBUG: [serial port driver] channel 'ADC C' of device 'optimus-911-m_1' <-- 401.18110501
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 25 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 19 00 01 e0 0d
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 04 00 bb f0
DEBUG: [serial port driver] channel 'Bits bullshit' of device 'optimus-911-m_1' <-- 1024
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 26 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1a 00 01 10 0d
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 57 f8 ce
DEBUG: [serial port driver] channel 'Temperature warm-up' of device 'optimus-911-m_1' <-- 57
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 27 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1b 00 01 41 cd
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 28 b9 2e
DEBUG: [serial port driver] channel 'Minimum speed %' of device 'optimus-911-m_1' <-- 40
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 28 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1c 00 01 f0 0c
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 01 01 79 60
DEBUG: [serial port driver] channel 'Power 1-2' of device 'optimus-911-m_1' <-- 257
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 29 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1d 00 01 a1 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'T15 ERR or T7 WRR target' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 30 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1e 00 01 51 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Power 3-4' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 30 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 1e 00 01 51 cc
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'PWM Water' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 32 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 20 00 01 30 00
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Remaining time to next mode' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 33 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 21 00 01 61 c0
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Sensor 3 type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 34 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 22 00 01 91 c0
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Sensor 4 type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 35 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 23 00 01 c0 00
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Refrigerant type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 36 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 24 00 01 71 c1
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Recuperator type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 36 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 24 00 01 71 c1
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
DEBUG: [serial port driver] channel 'Recirculation type' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 37 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 25 00 01 20 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 01 78 f0
INFO: [signal handling] Received signal 15
DEBUG: [serial port driver] channel 'Speed configuration' of device 'optimus-911-m_1' <-- 1
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 38 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 26 00 01 d0 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Power limit' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [modbus] read 1 input(s) @ 38 of device modbus:1
DEBUG: [port] Sleep 0 us
DEBUG: [port] Write: 01 04 00 26 00 01 d0 01
DEBUG: [port] Sleep 2000 us
DEBUG: [port] ReadFrame: 01 04 02 00 00 b9 30
DEBUG: [serial port driver] channel 'Humidity' of device 'optimus-911-m_1' <-- 0
DEBUG: [tx 0XB5E00730] Open
DEBUG: [tx 0XB5E00730] Close
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [driver] Receive event SyncEvent{}
DEBUG: [driver] waiting for transaction to complete
DEBUG: [tx 0XB5E00730] Open
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Humidity' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Humidity/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Humidity/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Humidity/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power limit' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power limit/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power limit/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power limit/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recuperator type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recuperator type/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recuperator type/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recuperator type/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Refrigerant type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Refrigerant type/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Refrigerant type/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Refrigerant type/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Minimum speed %' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Minimum speed %/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Minimum speed %/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Minimum speed %/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 3-4' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 3-4/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 3-4/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 3-4/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature warm-up' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature warm-up/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature warm-up/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature warm-up/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Bits bullshit' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Bits bullshit/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Bits bullshit/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Bits bullshit/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC C' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC C/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC C/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC C/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 1' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 1/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 1/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 1/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Heater type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Heater type/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Heater type/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Heater type/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 3 type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 3 type/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 3 type/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 3 type/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 1-2' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 1-2/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 1-2/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Power 1-2/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC B' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC B/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC B/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC B/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 1' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 1/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 1/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 1/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Software version' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Software version/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Software version/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Software version/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 4 type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 4 type/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 4 type/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Sensor 4 type/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 3' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 3/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 3/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 3/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining blowdown time' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining blowdown time/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining blowdown time/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining blowdown time/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 4' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 4/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 4/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature channel 4/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining warm-up time' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining warm-up time/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining warm-up time/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining warm-up time/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Speed configuration' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Speed configuration/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Speed configuration/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Speed configuration/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 2' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 2/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 2/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 2/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/T15 ERR or T7 WRR target' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/T15 ERR or T7 WRR target/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/T15 ERR or T7 WRR target/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/T15 ERR or T7 WRR target/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y4' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y4/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y4/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y4/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining defrost time' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining defrost time/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining defrost time/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining defrost time/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller type/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller type/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller type/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 3-4' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 3-4/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 3-4/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM 3-4/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y1' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y1/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y1/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y1/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature reverse water channel' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature reverse water channel/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature reverse water channel/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Temperature reverse water channel/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM Water' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM Water/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM Water/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM Water/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y2' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y2/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y2/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y2/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller state' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller state/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller state/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Controller state/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recirculation type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recirculation type/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recirculation type/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Recirculation type/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Maximum temperature limit' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Maximum temperature limit/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Maximum temperature limit/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Maximum temperature limit/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y3' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y3/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y3/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Purpose Y3/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ID' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ID/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ID/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ID/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining time to next mode' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining time to next mode/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining time to next mode/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/Remaining time to next mode/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM electric heater' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM electric heater/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM electric heater/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/PWM electric heater/meta/type' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC A' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC A/meta/order' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC A/meta/readonly' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/controls/ADC A/meta/type' payload: ''
DEBUG: [serial port driver] device optimus-911-m_1 removed successfully
DEBUG: [tx 0XB5E00730] Close
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/meta/driver' payload: ''
DEBUG: [mqtt] Publish '/devices/optimus-911-m_1/meta/name' payload: ''
DEBUG: [backend] emit StopEvent{}
DEBUG: [driver] Receive event StopEvent{}
DEBUG: [storage] Close BDB storage