switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode Entering firmware update mode. Checking if ubootenv part is present ## Loading FIT header to 0x42000000 ... ## Loading FIT strings to 0x42000028 ... ## Loading FIT struct to 0x42000100 ... Can't find subimage 'ubootenv' Extracting kernel ## Loading FIT header to 0x42000000 ... ## Loading FIT strings to 0x42000028 ... ## Loading FIT struct to 0x42000100 ... 21742 bytes read in 28 ms (757.8 KiB/s) Description: Update kernel Type: Kernel Image Compression: uncompressed Data Start: 0x42000300 Data Size: 12782 Bytes = 12.5 KiB Architecture: ARM OS: Linux Load Address: unavailable Entry Point: unavailable Hash algo: sha1 Hash value: 665c3a5d5c0406c523c67cd40629b86dc9768075 ## Verifying ... sha1+ Loading part 0 ... OK Extracting DTB ## Loading FIT header to 0x43000000 ... ## Loading FIT strings to 0x43000028 ... ## Loading FIT struct to 0x43000100 ... 63880 bytes read in 40 ms (1.5 MiB/s) Description: Update DTB Type: Flat Device Tree Compression: uncompressed Data Start: 0x43000540 Data Size: 54344 Bytes = 53.1 KiB Architecture: ARM Hash algo: sha1 Hash value: 88cb690e62d3e2fbe97df37350c2ee8c8abab757 ## Verifying ... sha1+ Loading part 0 ... OK zimage: Bad magic! ERROR: Failed to enter update mode! ERROR: /mnt/data/.wb-restore/factoryreset.fit missing or corrupt Checking if there is a microSD card with update file MMC: no card present Couldn't find partition mmc 0:1 Can't set block device MMC: no card present Couldn't find partition mmc 0:1 Can't set block device No update detected on microSD card, continuing boot 326 bytes read in 6 ms (52.7 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6480728 bytes read in 178 ms (34.7 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard733 54746 bytes read in 9 ms (5.8 MiB/s) 254 bytes read in 3 ms (82 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x62e358 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb133 (jenkins@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Feb 21 08:14:01 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.3.3 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x7ec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 bootmode=update_auto root=/dev/mmcblk0p3 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1004500K/1048576K available (10240K kernel code, 1478K rwdata, 3232K rodata, 1024K init, 306K bss, 27692K reserved, 16384K cma-reserved, 245748K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31894 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000022] Switching to timer-based delay loop, resolution 41ns [ 0.000355] Console: colour dummy device 80x30 [ 0.000427] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000457] pid_max: default: 32768 minimum: 301 [ 0.001631] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001708] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003715] CPU: Testing write buffer coherency: ok [ 0.004237] /cpus/cpu@0 missing clock-frequency property [ 0.004294] /cpus/cpu@1 missing clock-frequency property [ 0.004347] /cpus/cpu@2 missing clock-frequency property [ 0.004406] /cpus/cpu@3 missing clock-frequency property [ 0.004427] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005655] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.005870] rcu: Hierarchical SRCU implementation. [ 0.008295] smp: Bringing up secondary CPUs ... [ 0.019889] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031468] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.042817] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.043036] smp: Brought up 1 node, 4 CPUs [ 0.043079] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.043094] CPU: All CPU(s) started in HYP mode. [ 0.043108] CPU: Virtualization extensions available. [ 0.044167] devtmpfs: initialized [ 0.065551] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.065868] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.065904] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.068457] pinctrl core: initialized pinctrl subsystem [ 0.070412] NET: Registered protocol family 16 [ 0.075188] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.076600] thermal_sys: Registered thermal governor 'step_wise' [ 0.077867] No ATAGs? [ 0.078438] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.078477] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.162768] SCSI subsystem initialized [ 0.163066] usbcore: registered new interface driver usbfs [ 0.163157] usbcore: registered new interface driver hub [ 0.163314] usbcore: registered new device driver usb [ 0.163741] mc: Linux media interface: v0.10 [ 0.163795] videodev: Linux video capture interface: v2.00 [ 0.163876] pps_core: LinuxPPS API ver. 1 registered [ 0.163893] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.163923] PTP clock support registered [ 0.164232] Advanced Linux Sound Architecture Driver Initialized. [ 0.166976] clocksource: Switched to clocksource arch_sys_counter [ 1.309728] NET: Registered protocol family 2 [ 1.310842] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.310904] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.310990] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.311119] TCP: Hash tables configured (established 8192 bind 8192) [ 1.311794] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.312010] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.312651] NET: Registered protocol family 1 [ 1.314264] RPC: Registered named UNIX socket transport module. [ 1.314298] RPC: Registered udp transport module. [ 1.314317] RPC: Registered tcp transport module. [ 1.314336] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.316289] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.319853] Initialise system trusted keyrings [ 1.320262] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.335568] NFS: Registering the id_resolver key type [ 1.335647] Key type id_resolver registered [ 1.335670] Key type id_legacy registered [ 1.505680] Key type asymmetric registered [ 1.505714] Asymmetric key parser 'x509' registered [ 1.505923] bounce: pool size: 64 pages [ 1.506013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.506035] io scheduler mq-deadline registered [ 1.506053] io scheduler kyber registered [ 1.507453] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.654355] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.679894] brd: module loaded [ 1.697802] loop: module loaded [ 1.707620] libphy: Fixed MDIO Bus: probed [ 1.709166] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.709844] libphy: sun4i_mii_bus: probed [ 1.713754] CAN device driver interface [ 1.717553] PPP generic driver version 2.4.2 [ 1.717954] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.717983] ehci-platform: EHCI generic platform driver [ 1.719409] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.719453] ohci-platform: OHCI generic platform driver [ 1.720661] usbcore: registered new interface driver usb-storage [ 1.720804] usbcore: registered new interface driver usbserial_generic [ 1.721296] usbserial: USB Serial support registered for generic [ 1.725112] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 1.725138] sun6i-rtc 1c20400.rtc: RTC enabled [ 1.725556] i2c /dev entries driver [ 1.736505] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.741641] ledtrig-cpu: registered to indicate activity on CPUs [ 1.742292] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.743200] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.744501] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.744927] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.745280] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.745549] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 1.745853] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 1.746112] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 1.746355] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 1.746618] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 1.750140] usbcore: registered new interface driver usbhid [ 1.750180] usbhid: USB HID core driver [ 1.753507] iio-rescale a1-volt: using raw+scale source channel [ 1.755035] iio-rescale a2-volt: using raw+scale source channel [ 1.755810] iio-rescale a3-volt: using raw+scale source channel [ 1.756379] iio-rescale vin-volt: using raw+scale source channel [ 1.761229] Initializing XFRM netlink socket [ 1.762290] NET: Registered protocol family 10 [ 1.763626] Segment Routing with IPv6 [ 1.763769] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.764971] NET: Registered protocol family 17 [ 1.765125] can: controller area network core [ 1.765467] NET: Registered protocol family 29 [ 1.765518] can: raw protocol [ 1.765562] can: broadcast manager protocol [ 1.765624] can: netlink gateway - max_hops=1 [ 1.766578] Key type dns_resolver registered [ 1.766733] Registering SWP/SWPB emulation handler [ 1.767010] registered taskstats version 1 [ 1.767110] Loading compiled-in X.509 certificates [ 1.800453] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.807558] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.809353] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.817305] printk: console [ttyS0] disabled [ 1.817503] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 52, base_baud = 1500000) is a Allwinner sun4i [ 2.787454] printk: console [ttyS0] enabled [ 2.793908] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.800753] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.807401] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.814728] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.825481] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.834018] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.842880] libphy: sun4i_mii_bus: probed [ 2.848436] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.855243] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.861893] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.872152] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.879150] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.885816] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.893341] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.903878] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.913661] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.920487] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.926945] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.934281] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.944758] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.964233] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.980251] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0034/axp221-pek/input/input0 [ 3.002574] vcc-3v3: supplied by regulator-dummy [ 3.008336] vdd-cpu: supplied by regulator-dummy [ 3.014027] vdd-sys: supplied by regulator-dummy [ 3.019694] dcdc4: supplied by regulator-dummy [ 3.025140] vcc-dram: supplied by regulator-dummy [ 3.030098] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 3.037903] vcc-gmac-phy: supplied by vcc-3v3 [ 3.044725] dc5ldo: supplied by vcc-dram [ 3.049391] random: fast init done [ 3.053143] tv: Bringing 700000uV into 3300000-3300000uV [ 3.060319] tv: supplied by regulator-dummy [ 3.065852] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 3.072524] aldo2: supplied by regulator-dummy [ 3.078820] avcc-pll: supplied by regulator-dummy [ 3.084672] eldo1: supplied by regulator-dummy [ 3.090311] eldo2: supplied by regulator-dummy [ 3.095501] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 3.102412] vcc-pe: supplied by regulator-dummy [ 3.107604] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 3.115532] vcc-sd-alt: supplied by regulator-dummy [ 3.121892] dldo2: supplied by regulator-dummy [ 3.127669] dldo3: supplied by regulator-dummy [ 3.133379] dldo4: supplied by regulator-dummy [ 3.138696] rtc_ldo: supplied by regulator-dummy [ 3.144447] ldo_io0: supplied by regulator-dummy [ 3.150194] ldo_io1: supplied by regulator-dummy [ 3.155767] axp20x-adc axp22x-adc: DMA mask not set [ 3.162775] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 3.173228] axp20x-i2c 0-0034: AXP20X driver loaded [ 3.206246] rtc-pcf85063 2-0051: registered as rtc0 [ 3.220592] rtc-pcf85063 2-0051: setting system clock to 2023-05-02T08:03:13 UTC (1683014593) [ 3.230359] lm75 2-0048: supply vs not found, using dummy regulator [ 3.241460] lm75 2-0048: hwmon1: sensor 'lm75b' [ 3.272037] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 3.280558] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 3.290986] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 3.296819] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 3.298994] libphy: sun4i_mii_bus: probed [ 3.414277] mmc0: new DDR MMC card at address 0001 [ 3.419974] mmcblk0: mmc0:0001 DG4008 7.28 GiB [ 3.424908] mmcblk0boot0: mmc0:0001 DG4008 partition 1 4.00 MiB [ 3.431298] mmcblk0boot1: mmc0:0001 DG4008 partition 2 4.00 MiB [ 3.437554] mmcblk0rpmb: mmc0:0001 DG4008 partition 3 4.00 MiB, chardev (246:0) [ 3.450631] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 65 MAC: 00:85:01:01:6d:e6 [ 3.454069] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 3.459851] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 3.469447] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 3.475807] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 3.481934] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 3.489191] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 3.496410] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 3.501397] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 3.508193] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 3.513849] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 3.520192] libphy: stmmac: probed [ 3.779477] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.785090] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.793286] ehci-platform 1c14000.usb: irq 37, io mem 0x01c14000 [ 3.826965] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.834052] hub 1-0:1.0: USB hub found [ 3.837913] hub 1-0:1.0: 1 port detected [ 3.843072] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.848699] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.856681] ehci-platform 1c19000.usb: irq 39, io mem 0x01c19000 [ 3.886960] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.893980] hub 2-0:1.0: USB hub found [ 3.897815] hub 2-0:1.0: 1 port detected [ 3.902893] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.908512] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.916492] ehci-platform 1c1c000.usb: irq 41, io mem 0x01c1c000 [ 3.947374] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.954333] hub 3-0:1.0: USB hub found [ 3.958160] hub 3-0:1.0: 1 port detected [ 4.057053] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 4.063697] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 4.071659] ohci-platform 1c14400.usb: irq 38, io mem 0x01c14400 [ 4.151873] hub 4-0:1.0: USB hub found [ 4.155693] hub 4-0:1.0: 1 port detected [ 4.160807] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 4.167464] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 4.175393] ohci-platform 1c19400.usb: irq 40, io mem 0x01c19400 [ 4.251828] hub 5-0:1.0: USB hub found [ 4.255634] hub 5-0:1.0: 1 port detected [ 4.260741] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.267419] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 4.275215] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.282444] ohci-platform 1c1c400.usb: irq 42, io mem 0x01c1c400 [ 4.361883] hub 6-0:1.0: USB hub found [ 4.365692] hub 6-0:1.0: 1 port detected [ 4.371736] of_cfs_init [ 4.373080] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 4.374300] of_cfs_init: OK [ 4.386102] ALSA device list: [ 4.389122] No soundcards found. [ 4.404131] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 4.424433] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 4.432683] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 4.443799] devtmpfs: mounted [ 4.451655] Freeing unused kernel memory: 1024K [ 4.477450] Run /sbin/init as init process [ 4.617032] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 4.772401] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.799027] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.839299] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.846306] scsi host0: usb-storage 1-1:1.0 [ 4.854238] systemd[1]: Set hostname to . [ 5.635272] systemd[1]: Queued start job for default target Graphical Interface. [ 5.645234] random: systemd: uninitialized urandom read (16 bytes read) [ 5.656004] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.697462] random: systemd: uninitialized urandom read (16 bytes read) [ 5.706061] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.747192] random: systemd: uninitialized urandom read (16 bytes read) [ 5.755971] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.799035] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.838776] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.877667] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.917526] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests [ 5.928225] scsi 0:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6 to Wall Directory Watch. [ 5.941303] sd 0:0:0:0: [sda] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB) [ 5.951282] sd 0:0:0:0: [sda] Write Protect is off [ 5.957160] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.967622] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.979746] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 6.004325] sda: sda1 [ 6.011189] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 6.017984] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 6.057311] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 6.088454] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 6.127662] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 6.178427] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.187762] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.228225] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.261671] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.297956] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.338181] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.352252] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.393005] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.433195] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.473950] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 6.515468] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 6.564395] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.604129] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.631198] fuse: init (API version 7.32) [ 6.644285] systemd[1]: Started Nameserver information manager. [ OK ] Started Nameserver information manager. [ 6.704159] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.720027] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.768487] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.788144] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.802807] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.825996] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 6.834192] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 6.845214] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System 6.856532] systemd[1]: Mounted Kernel Trace File System. m. [ OK ] Mounted Kernel Trace File System. [ 6.919786] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.959056] systemd[1]: modprobe@drm.service: Succeeded. [ 6.966040] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 7.010600] systemd[1]: modprobe@fuse.service: Succeeded. [ 7.017621] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 7.057961] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 7.298926] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Rule-based Manage…for Device Events and Files... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Finished Coldplug All udev Devices. Starting Helper to synchronize boot up for ifupdown... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ 8.304679] Driver for 1-wire Dallas network protocol. [ 8.574536] usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, using dummy regulator [ 8.727326] Bluetooth: Core ver 2.22 [ 8.731046] NET: Registered protocol family 31 [ 8.735510] Bluetooth: HCI device and connection manager initialized [ 8.742060] Bluetooth: HCI socket layer initialized [ 8.747031] Bluetooth: L2CAP socket layer initialized [ 8.752153] Bluetooth: SCO socket layer initialized [ 8.787638] usbcore: registered new interface driver btusb [ 8.790953] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 8.814751] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 8.820864] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 8.822241] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.833917] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 8.841728] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 8.851073] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 8.985942] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.002025] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/mmcblk0p6. [ 9.479203] RTL871X: module init start [ 9.482987] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ OK ] Found device /dev/ttyS0. [ 9.670866] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ 9.754170] RTL871X: rtw_ndev_init(wlan0) [ 9.759646] RTL871X: rtw_ndev_init(wlan1) [ 9.773046] usbcore: registered new interface driver rtl8723bu [ 9.779003] RTL871X: module init ret=0 [ 10.002524] usbcore: registered new interface driver rtl8xxxu [ 10.717018] random: crng init done [ 10.720451] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... Starting Load/Save RF Kill Switch Status... [ 12.177058] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SS [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Reached target Swap. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 12.426201] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 12.622197] systemd-journald[144]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config files... [ 12.661908] systemd-journald[144]: File /var/log/journal/667b6120834d44239781dbb0c81f0cab/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Monitor directorie… templates for wb-mqtt-serial. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Paths. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Authorization Manager... Starting User Login Management... [ 14.361755] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.367278] Bluetooth: BNEP filters: protocol multicast [ 14.372571] Bluetooth: BNEP socket layer initialized [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... [ OK ] Started Generates wb-mqtt-… UI schema for wb-mqtt-confed. Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. Starting Rotate log files... [ OK ] Started Authorization Manager. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started User Login Management. [ OK ] Started Bluetooth service. [ OK ] Started WPA supplicant. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Finished Rotate log files. [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. [ 20.189925] 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 130, base_baud = 1500000) is a Allwinner sun4i [ 21.215658] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 131, base_baud = 1500000) is a Allwinner sun4i [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ 32.726978] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 33.014454] usb 3-1: USB disconnect, device number 2 [ 34.407027] vcc-gmac-phy: disabling [ 34.410880] dc5ldo: disabling [ 34.414189] dldo4: disabling [ 34.417455] vdd-sd-power: disabling [ 34.420955] vcc-sd: disabling Starting Online ext4 Metad…a Check for All Filesystems... [ OK ] Finished Online ext4 Metadata Check for All Filesystems. [ 38.896984] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 39.131167] usbcore: registered new interface driver cdc_ether [ 39.155893] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 2e:84:76:8f:4d:e1 [ 39.158551] usbcore: registered new interface driver option [ 39.166463] usbcore: registered new interface driver rndis_host [ 39.171839] usbserial: USB Serial support registered for GSM modem (1-port) [ 39.185441] option 3-1:1.2: GSM modem (1-port) converter detected [ 39.192318] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 39.199534] option 3-1:1.4: GSM modem (1-port) converter detected [ 39.206373] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 39.213767] option 3-1:1.5: GSM modem (1-port) converter detected [ 39.220643] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 39.228583] option 3-1:1.3: GSM modem (1-port) converter detected [ 39.235427] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [ OK ] Finished Power on GSM modem. [ OK ] Reached target Network (Pre). Starting Network Manager... Starting Raise network interfaces... [ OK ] Finished Raise network interfaces. [ OK ] Started Network Manager. [ OK ] Reached target Network. Starting Network Manager Wait Online... Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started KNX Daemon. [ 43.918837] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 43.933270] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 43.940696] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ INFO ] Skipped dnsmasq - A lightw…t DH[ 43.948502] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW CP and caching DNS server. [ 43.968504] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ OK ] Finished KNXD Configurator for Wiren Board. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [ OK ] Reached target Host and Network Name Lookups. Starting Network Manager Script Dispatcher Service... [ OK ] Started Getty on tty1. Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Started Wiren Board MQTT KNX bridge. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Started Network Manager Script Dispatcher Service. [FAILED] Failed to start Mosquitto MQTT Broker. See 'systemctl status mosquitto.service' for details. [ OK ] Finished Compensation of s…ice-tree (with opposite sign). [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost… generating archive with data. [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. [ OK ] Started Wiren Board journald to MQTT gateway. Starting Wiren Board MQTT to Modbus TCP gateway... [ OK ] Started metrics sender.. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started MQTT Rule engine for Wiren Board. [ OK ] Started Wiren Board firmware update service. [ OK ] Stopped Mosquitto MQTT Broker. Starting Mosquitto MQTT Broker... [FAILED] Failed to start Mosquitto MQTT Broker. See 'systemctl status mosquitto.service' for details. [FAILED] Failed to start Wiren Board MQTT to OPC UA gateway. See 'systemctl status wb-mqtt-opcua.service' for details. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Stopped Mosquitto MQTT Broker. Starting Mosquitto MQTT Broker... [ OK ] Stopped MQTT Rule engine for Wiren Board. [FAILED] Failed to start Mosquitto MQTT Broker. See 'systemctl status mosquitto.service' for details. [ OK ] Stopped Wiren Board database logger. [ OK ] Started Wiren Board database logger. [ OK ] Started MQTT Rule engine for Wiren Board. [ OK ] Stopped Wiren Board MQTT to OPC UA gateway. [ OK ] Stopped Mosquitto MQTT Broker. Starting Mosquitto MQTT Broker... [ OK ] Stopped Wiren Board journald to MQTT gateway. [ OK ] Started A high performance…er and a reverse proxy server. Starting USB Debug Network... [FAILED] Failed to start Mosquitto MQTT Broker. See 'systemctl status mosquitto.service' for details. Starting Initialize Wiren Board on successful boot... [ OK ] Started Wiren Board journald to MQTT gateway. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Stopped Mosquitto MQTT Broker. Starting Mosquitto MQTT Broker... [ OK ] Stopped MQTT Driver for serial devices. [ OK ] Started MQTT Driver for serial devices. [ OK ] Stopped MQTT Rule engine for Wiren Board. [FAILED] Failed to start Wiren Board MQTT to OPC UA gateway. See 'systemctl status wb-mqtt-opcua.service' for details. Debian GNU/Linux 11 IQ368005 ttyS0 IQ368005 login: r[ 52.946782] RTL871X: assoc success [ 52.951512] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready oot Password: [ 56.564558] process '/usr/sbin/netplugd' started with executable stack [ 57.104121] RTL871X: assoc success [ 57.109880] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 64.926828] Mass Storage Function, version: 2009/09/11 [ 64.932315] LUN: removable file: (no medium) [ 65.018151] using random self ethernet address [ 65.022641] using random host ethernet address [ 65.121421] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 65.126031] dbg0: MAC 1a:55:89:a2:69:43 _ _ _ __ _(_)_ __ ___ _ __ | |__ ___ __ _ _ __ __| | \ \ /\ / / | '__/ _ \ '_ \| '_ \ / _ \ / _` | '__/ _` | \ V V /| | | | __/ | | | |_) | (_) | (_| | | | (_| | \_/\_/ |_|_| \___|_| |_|_.__/ \___/ \__,_|_| \__,_| Welcome to Wiren Board 7.3.4 (s/n AKODK3IO), release wb-2304 (as stable) Linux IQ368005 5.10.35-wb133 #1 SMP Tue Feb 21 08:14:01 UTC 2023 armv7l GNU/Linux System load: 5.45 1.39 0.47 Up time: 1 min Memory usage: 12% of 997M Usage of /: 81% of 976M /mnt/data: 25% of 4.9G Last login: Tue Apr 25 08:41:56 UTC 2023 on ttyS0 root@IQ368005:~# lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 1e0e:9011 Qualcomm / Option Mobile Composite Device Bus Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0bda:b720 Realtek Semiconductor Corp. RTL8723BU 802.11b/g/n WLAN Adapter Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0781:5591 SanDisk Corp. Ultra Flair Bus 001 Device 001: ID 1d6b:0002 Linux Foun