from group wdggrp_6x on device 20e0000.iomuxc [ 1.944884] gpio-wdt watchdog_6x: Error applying setting, reverse things back [ 1.952076] gpio-wdt: probe of watchdog_6x failed with error -22 [ 1.959878] sdhci: Secure Digital Host Controller Interface driver [ 1.966209] sdhci: Copyright(c) Pierre Ossman [ 1.970595] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.043227] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.062845] ledtrig-cpu: registered to indicate activity on CPUs [ 2.072856] random: fast init done [ 2.090986] usbcore: registered new interface driver usbhid [ 2.098754] usbhid: USB HID core driver [ 2.113084] NET: Registered protocol family 17 [ 2.124111] Registering SWP/SWPB emulation handler [ 2.131191] registered taskstats version 1 [ 2.148379] imx_thermal 2000000.aips-bus:tempmon: Industrial CPU temperature grade - max:1 05C critical:100C passive:95C [ 2.172827] rtc-pcf8563 4-0051: setting system clock to 2024-06-26 16:04:43 UTC (171941788 3) [ 2.181322] of_cfs_init [ 2.183975] of_cfs_init: OK [ 2.198033] vdd3p0: disabling [ 2.203257] vref-3v3: disabling [ 2.206418] usb1_vbus: disabling [ 2.212280] mmc0: new DDR MMC card at address 0001 [ 2.223313] Freeing unused kernel memory: 5120K (b0800000 - b0d00000) [ 2.233375] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 2.243421] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 2.256963] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 2.273665] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB [ 2.287580] mmcblk0: p1 p2 p3 p4 < p5 p6 > mount: mounting none on /dev/pts failed: No such file or directory Boot mode: update_auto Board is WB6, loading ci_hdrc_imx module [ 2.544791] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.549737] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.583209] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.588907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.595768] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.603001] usb usb1: Product: EHCI Host Controller [ 2.607916] usb usb1: Manufacturer: Linux 4.9.22-wb6_initramfs ehci_hcd [ 2.614590] usb usb1: SerialNumber: ci_hdrc.0 [ 2.620432] hub 1-0:1.0: USB hub found [ 2.624431] hub 1-0:1.0: 1 port detected [ 2.629915] 2184200.usb supply vbus not found, using dummy regulator [ 2.640626] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.645720] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 2.673248] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.679036] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.685918] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.693204] usb usb2: Product: EHCI Host Controller [ 2.698100] usb usb2: Manufacturer: Linux 4.9.22-wb6_initramfs ehci_hcd [ 2.704766] usb usb2: SerialNumber: ci_hdrc.1 [ 2.710570] hub 2-0:1.0: USB hub found [ 2.714561] hub 2-0:1.0: 1 port detected [ 2.983303] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.073322] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 3.175297] usb 1-1: New USB device found, idVendor=1609, idProduct=3a04 [ 3.182121] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.189489] usb 1-1: Product: USB Disk [ 3.193376] usb 1-1: Manufacturer: Flash [ 3.197348] usb 1-1: SerialNumber: 3727024D981D315511781 [ 3.205918] usb-storage 1-1:1.0: USB Mass Storage device detected [ 3.214507] scsi host0: usb-storage 1-1:1.0 [ 3.263903] usb 2-1: New USB device found, idVendor=0424, idProduct=2514 [ 3.270677] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.279621] hub 2-1:1.0: USB hub found [ 3.283772] hub 2-1:1.0: 4 ports detected [ 3.603368] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 3.755812] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720 [ 3.762821] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.770448] usb 2-1.1: Product: 802.11n WLAN Adapter [ 3.775562] usb 2-1.1: Manufacturer: Realtek [ 3.779882] usb 2-1.1: SerialNumber: 00e04c000001 1+0 records in 1+0 records out 1024 bytes (1.0 kB, 1.0 KiB) copied, 0.00030325 s, 3.4 MB/s Wait for eMMC to become available... Activate Mass Storage device [ 4.016586] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of p ending drivers [ 4.244867] scsi 0:0:0:0: Direct-Access Flash USB Disk 6.90 PQ: 0 ANSI: 2 [ 4.255706] sd 0:0:0:0: [sda] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB) [ 4.265690] sd 0:0:0:0: [sda] Write Protect is off [ 4.271170] sd 0:0:0:0: [sda] No Caching mode page found [ 4.276664] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.312497] sda: sda1 [ 4.318919] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 38.584288] usb 1-1: USB disconnect, device number 2 [ 45.273312] usb 1-1: new high-speed USB device number 3 using ci_hdrc [ 45.465280] usb 1-1: New USB device found, idVendor=1609, idProduct=3a04 [ 45.472100] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 45.479447] usb 1-1: Product: USB Disk [ 45.483331] usb 1-1: Manufacturer: Flash [ 45.487303] usb 1-1: SerialNumber: 3727024D981D315511781 [ 45.495911] usb-storage 1-1:1.0: USB Mass Storage device detected [ 45.503391] scsi host0: usb-storage 1-1:1.0 [ 46.565486] scsi 0:0:0:0: Direct-Access Flash USB Disk 6.90 PQ: 0 ANSI: 2 [ 46.577957] sd 0:0:0:0: [sda] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB) [ 46.589295] sd 0:0:0:0: [sda] Write Protect is off [ 46.595531] sd 0:0:0:0: [sda] No Caching mode page found [ 46.600922] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 46.645412] sda: sda1 [ 46.658521] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 50.528796] usb 1-1: USB disconnect, device number 3 [ 59.753315] usb 1-1: new high-speed USB device number 4 using ci_hdrc [ 59.946917] usb 1-1: New USB device found, idVendor=0930, idProduct=6544 [ 59.953844] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 59.961102] usb 1-1: Product: TransMemory [ 59.965686] usb 1-1: Manufacturer: TOSHIBA [ 59.969917] usb 1-1: SerialNumber: 56801022DB57C19100026E36 [ 59.978801] usb-storage 1-1:1.0: USB Mass Storage device detected [ 59.986977] scsi host0: usb-storage 1-1:1.0 [ 61.056792] scsi 0:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 4 [ 61.069239] sd 0:0:0:0: [sda] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB) [ 61.080572] sd 0:0:0:0: [sda] Write Protect is off [ 61.086817] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 61.105521] sda: sda1 [ 61.114941] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 64.238676] usb 1-1: USB disconnect, device number 4 [ 66.4696 U-Boot SPL 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) DRAM init ok, rows:16, ncs:1, size: 1024MB .p0_mpdgctrl0 = 0x01160116 .p0_mpdgctrl1 = 0x0e3f0e3f .p0_mprddlctl = 0x3f3f3a3f .p0_mpwrdlctl = 0x3f3f3632 .p0_mpwldectrl0 = 0x00100012 .p0_mpwldectrl1 = 0x00130013 Trying to boot from MMC1 Warning - USDHC2 controller not supporting U-Boot 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 49C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 1 GiB MMC: FSL_SDHC: 1 In: serial Out: serial Err: serial Loading Environment from MMC... OK Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program ot p_aes_program ## Info: input data size = 43 = 0x2B bootcount=0 mmcpart=3 upgrade_available=0 Environment size: 43/8188 bytes ## Resetting to default environment ## Info: input data size = 43 = 0x2B Net: Could not get PHY for FEC0: addr 0 No ethernet found. Hit any key to stop autoboot: 0 ## Info: input data size = 4285 = 0x10BD switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................ Entering firmware update mode. Checking if ubootenv part is present ## Loading FIT header to 0x82000000 ... ## Loading FIT strings to 0x82000028 ... ## Loading FIT struct to 0x82000100 ... Can't find subimage 'ubootenv' Extracting kernel ## Loading FIT header to 0x82000000 ... ## Loading FIT strings to 0x82000028 ... ## Loading FIT struct to 0x82000100 ... 7937936 bytes read in 365 ms (20.7 MiB/s) Description: Update kernel Type: Kernel Image Compression: uncompressed Data Start: 0x82000300 Data Size: 7928976 Bytes = 7.6 MiB Architecture: ARM OS: Linux Load Address: unavailable Entry Point: unavailable Hash algo: sha1 Hash value: 47f6419e0d5d8326c41b16761827dc3d746fec78 ## Verifying ... sha1+ Loading part 0 ... OK Extracting DTB ## Loading FIT header to 0x83000000 ... ## Loading FIT strings to 0x83000028 ... ## Loading FIT struct to 0x83000100 ... 55849 bytes read in 30 ms (1.8 MiB/s) Description: Update DTB Type: Flat Device Tree Compression: uncompressed Data Start: 0x83000480 Data Size: 46505 Bytes = 45.4 KiB Architecture: ARM Hash algo: sha1 Hash value: ef9dd3fe2b348fb8eb9f150b9dc2e27d6899e823 ## Verifying ... sha1+ Loading part 0 ... OK Kernel image @ 0x82000000 [ 0x000000 - 0x78fc90 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to bef8c000, end bef9a5a8 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.22-wb6_initramfs (root@WB-buildserver) (gcc version 5.4.0 20 160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) ) #2 SMP Tue Feb 1 16:52:01 MSK 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Wiren Board init (i.MX6UL/ULL) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] percpu: Embedded 14 pages/cpu @ef7d0000 s25932 r8192 d23220 u57344 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: console=ttymxc0,115200 bootmode=update_auto [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1026552K/1048576K available (5120K kernel code, 202K rwdata, 1576K rod ata, 5120K init, 295K bss, 22024K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xb0000000 - 0xf0000000 (1024 MB) [ 0.000000] modules : 0xaf000000 - 0xb0000000 ( 16 MB) [ 0.000000] .text : 0xb0008000 - 0xb0600000 (6112 kB) [ 0.000000] .init : 0xb0800000 - 0xb0d00000 (5120 kB) [ 0.000000] .data : 0xb0d00000 - 0xb0d32880 ( 203 kB) [ 0.000000] .bss : 0xb0d34000 - 0xb0d7ddb0 ( 296 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000054] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002615] Console: colour dummy device 80x30 [ 0.002657] Calibrating delay loop (skipped), value calculated using timer frequency.. 48. 00 BogoMIPS (lpj=240000) [ 0.002689] pid_max: default: 32768 minimum: 301 [ 0.002871] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002896] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004146] CPU: Testing write buffer coherency: ok [ 0.004651] /cpus/cpu@0 missing clock-frequency property [ 0.004692] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004751] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.007182] Brought up 1 CPUs [ 0.007218] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.007234] CPU: All CPU(s) started in SVC mode. [ 0.008562] devtmpfs: initialized [ 0.035034] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.035726] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19 112604462750000 ns [ 0.035777] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.035962] pinctrl core: initialized pinctrl subsystem [ 0.038026] NET: Registered protocol family 16 [ 0.038543] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.041280] cpuidle: using governor menu [ 0.077031] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.077064] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.079290] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.119824] mxs-dma 1804000.dma-apbh: initialized [ 0.124351] SCSI subsystem initialized [ 0.124979] usbcore: registered new interface driver usbfs [ 0.125149] usbcore: registered new interface driver hub [ 0.125392] usbcore: registered new device driver usb [ 0.127024] i2c-gpio i2c_rtc: using pins 48 (SDA) and 49 (SCL) [ 0.127869] i2c-gpio i2c_eeprom1: using pins 76 (SDA) and 67 (SCL) [ 0.128724] i2c-gpio i2c_eeprom2: using pins 70 (SDA) and 71 (SCL) [ 0.130237] i2c i2c-1: IMX I2C adapter registered [ 0.130279] i2c i2c-1: can't use DMA, using PIO instead. [ 0.130693] pps_core: LinuxPPS API ver. 1 registered [ 0.130718] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.130776] PTP clock support registered [ 0.133189] clocksource: Switched to clocksource mxc_timer1 [ 0.157346] NET: Registered protocol family 2 [ 0.158562] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.158769] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.159062] TCP: Hash tables configured (established 8192 bind 8192) [ 0.159209] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.159293] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.159639] NET: Registered protocol family 1 [ 0.160496] RPC: Registered named UNIX socket transport module. [ 0.160527] RPC: Registered udp transport module. [ 0.160543] RPC: Registered tcp transport module. [ 0.160559] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.734559] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 0.749570] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.751667] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.762118] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.762152] io scheduler noop registered (default) [ 0.767748] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.767790] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.776978] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 18, base_baud = 5000000) is a IMX [ 1.329365] console [ttymxc0] enabled [ 1.334986] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 55, base_baud = 5000000) is a IMX [ 1.345282] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 56, base_baud = 5000000) is a IMX [ 1.388111] imx_rngc 2284000.rngb: Freescale RNGC registered. [ 1.423377] brd: module loaded [ 1.442301] loop: module loaded [ 1.450586] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.462031] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.469620] libphy: Fixed MDIO Bus: probed [ 1.476151] 20b4000.ethernet supply phy not found, using dummy regulator [ 1.484208] pps pps0: new PPS source ptp0 [ 1.517810] libphy: fec_enet_mii_bus: probed [ 1.523944] fec 20b4000.ethernet eth0: registered PHC device 0 [ 1.643279] 2188000.ethernet supply phy not found, using dummy regulator [ 1.764242] pps pps1: new PPS source ptp1 [ 1.769318] libphy: fec_enet_mii_bus: probed [ 1.776447] fec 2188000.ethernet eth1: registered PHC device 1 [ 1.782873] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.789576] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.795415] usbcore: registered new interface driver cdc_acm [ 1.801111] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.809468] usbcore: registered new interface driver usb-storage [ 1.872889] rtc-pcf8563 4-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 1.889141] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 [ 1.898274] i2c /dev entries driver [ 1.906546] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.914075] imx6ul-pinctrl 20e0000.iomuxc: pin MX6UL_PAD_SD1_DATA1 already requested by wa tchdog; cannot claim for watchdog_6x [ 1.925617] imx6ul-pinctrl 20e0000.iomuxc: pin-114 (watchdog_6x) status -22 [ 1.932622] imx6ul-pinctrl 20e0000.iomuxc: could not request pin 114 (MX6UL_PAD_SD1_DATA1) from group wdggrp_6x on device 20e0000.iomuxc [ 1.945048] gpio-wdt watchdog_6x: Error applying setting, reverse things back [ 1.952241] gpio-wdt: probe of watchdog_6x failed with error -22 [ 1.960034] sdhci: Secure Digital Host Controller Interface driver [ 1.966367] sdhci: Copyright(c) Pierre Ossman [ 1.970753] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.043256] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.062858] ledtrig-cpu: registered to indicate activity on CPUs [ 2.072865] random: fast init done [ 2.091033] usbcore: registered new interface driver usbhid [ 2.098806] usbhid: USB HID core driver [ 2.113108] NET: Registered protocol family 17 [ 2.124112] Registering SWP/SWPB emulation handler [ 2.131170] registered taskstats version 1 [ 2.148352] imx_thermal 2000000.aips-bus:tempmon: Industrial CPU temperature grade - max:1 05C critical:100C passive:95C [ 2.172838] rtc-pcf8563 4-0051: setting system clock to 2024-06-26 16:06:10 UTC (171941797 0) [ 2.181333] of_cfs_init [ 2.183984] of_cfs_init: OK [ 2.198054] vdd3p0: disabling [ 2.203279] vref-3v3: disabling [ 2.206441] usb1_vbus: disabling [ 2.212307] mmc0: new DDR MMC card at address 0001 [ 2.223341] Freeing unused kernel memory: 5120K (b0800000 - b0d00000) [ 2.233488] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 2.240701] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 2.253907] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 2.268500] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB [ 2.284378] mmcblk0: p1 p2 p3 p4 < p5 p6 > mount: mounting none on /dev/pts failed: No such file or directory Boot mode: update_auto Board is WB6, loading ci_hdrc_imx module [ 2.546055] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.551004] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.583242] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.588949] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.595810] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.603043] usb usb1: Product: EHCI Host Controller [ 2.607973] usb usb1: Manufacturer: Linux 4.9.22-wb6_initramfs ehci_hcd [ 2.614635] usb usb1: SerialNumber: ci_hdrc.0 [ 2.620473] hub 1-0:1.0: USB hub found [ 2.624480] hub 1-0:1.0: 1 port detected [ 2.629958] 2184200.usb supply vbus not found, using dummy regulator [ 2.640669] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.645767] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 2.673282] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.679061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.685944] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.693228] usb usb2: Product: EHCI Host Controller [ 2.698123] usb usb2: Manufacturer: Linux 4.9.22-wb6_initramfs ehci_hcd [ 2.704815] usb usb2: SerialNumber: ci_hdrc.1 [ 2.710603] hub 2-0:1.0: USB hub found [ 2.714601] hub 2-0:1.0: 1 port detected [ 2.983328] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.073349] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 3.175327] usb 1-1: New USB device found, idVendor=1609, idProduct=3a04 [ 3.182152] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.189517] usb 1-1: Product: USB Disk [ 3.193412] usb 1-1: Manufacturer: Flash [ 3.197383] usb 1-1: SerialNumber: 3727024D981D315511781 [ 3.206397] usb-storage 1-1:1.0: USB Mass Storage device detected [ 3.213500] scsi host0: usb-storage 1-1:1.0 [ 3.263945] usb 2-1: New USB device found, idVendor=0424, idProduct=2514 [ 3.270716] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.279659] hub 2-1:1.0: USB hub found [ 3.283816] hub 2-1:1.0: 4 ports detected [ 3.603397] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 3.755858] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720 [ 3.762865] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.770486] usb 2-1.1: Product: 802.11n WLAN Adapter [ 3.775597] usb 2-1.1: Manufacturer: Realtek [ 3.779915] usb 2-1.1: SerialNumber: 00e04c000001 1+0 records in 1+0 records out 1024 bytes (1.0 kB, 1.0 KiB) copied, 0.000314416 s, 3.3 MB/s Wait for eMMC to become available... Activate Mass Storage device [ 4.016619] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of p ending drivers [ 4.244895] scsi 0:0:0:0: Direct-Access Flash USB Disk 6.90 PQ: 0 ANSI: 2 [ 4.255613] sd 0:0:0:0: [sda] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB) [ 4.265721] sd 0:0:0:0: [sda] Write Protect is off [ 4.271200] sd 0:0:0:0: [sda] No Caching mode page found [ 4.276701] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.312523] sda: sda1 [ 4.318826] sd 0:0:0:0: [sda] Attached SCSI removable disk ^[[ 26▒ U-Boot SPL 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) DRAM init ok, rows:16, ncs:1, size: 1024MB .p0_mpdgctrl0 = 0x01150112 .p0_mpdgctrl1 = 0x0e3f0e3f .p0_mprddlctl = 0x3f3f3a3f .p0_mpwrdlctl = 0x3f3f3632 .p0_mpwldectrl0 = 0x00100012 .p0_mpwldectrl1 = 0x00130013 Trying to boot from MMC1 Warning - USDHC2 controller not supporting U-Boot 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 49C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 1 GiB MMC: FSL_SDHC: 1 In: serial Out: serial Err: serial Loading Environment from MMC... OK Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 43 = 0x2B bootcount=0 mmcpart=3 upgrade_available=0 Environment size: 43/8188 bytes ## Resetting to default environment ## Info: input data size = 43 = 0x2B Net: Could not get PHY for FEC0: addr 0 No ethernet found. Hit any key to stop autoboot: 0 ## Info: input data size = 4285 = 0x10BD switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................ Entering firmware update mode. Checking if ubootenv part is present ## Loading FIT header to 0x82000000 ... ## Loading FIT strings to 0x82000028 ... ## Loading FIT struct to 0x82000100 ... Can't find subimage 'ubootenv' Extracting kernel ## Loading FIT header to 0x82000000 ... ## Loading FIT strings to 0x82000028 ... ## Loading FIT struct to 0x82000100 ... 7937936 bytes read in 364 ms (20.8 MiB/s) Description: Update kernel Type: Kernel Image Compression: uncompressed Data Start: 0x82000300 Data Size: 7928976 Bytes = 7.6 MiB Architecture: ARM OS: Linux Load Address: unavailable Entry Point: unavailable Hash algo: sha1 Hash value: 47f6419e0d5d8326c41b16761827dc3d746fec78 ## Verifying ... sha1+ Loading part 0 ... OK Extracting DTB ## Loading FIT header to 0x83000000 ... ## Loading FIT strings to 0x83000028 ... ## Loading FIT struct to 0x83000100 ... 55849 bytes read in 30 ms (1.8 MiB/s) Description: Update DTB Type: Flat Device Tree Compression: uncompressed Data Start: 0x83000480 Data Size: 46505 Bytes = 45.4 KiB Architecture: ARM Hash algo: sha1 Hash value: ef9dd3fe2b348fb8eb9f150b9dc2e27d6899e823 ## Verifying ... sha1+ Loading part 0 ... OK Kernel image @ 0x82000000 [ 0x000000 - 0x78fc90 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to bef8c000, end bef9a5a8 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.22-wb6_initramfs (root@WB-buildserver) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) ) #2 SMP Tue Feb 1 16:52:01 MSK 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Wiren Board init (i.MX6UL/ULL) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] percpu: Embedded 14 pages/cpu @ef7d0000 s25932 r8192 d23220 u57344 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: console=ttymxc0,115200 bootmode=update_auto [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1026552K/1048576K available (5120K kernel code, 202K rwdata, 1576K rodata, 5120K init, 295K bss, 22024K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xb0000000 - 0xf0000000 (1024 MB) [ 0.000000] modules : 0xaf000000 - 0xb0000000 ( 16 MB) [ 0.000000] .text : 0xb0008000 - 0xb0600000 (6112 kB) [ 0.000000] .init : 0xb0800000 - 0xb0d00000 (5120 kB) [ 0.000000] .data : 0xb0d00000 - 0xb0d32880 ( 203 kB) [ 0.000000] .bss : 0xb0d34000 - 0xb0d7ddb0 ( 296 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000055] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002625] Console: colour dummy device 80x30 [ 0.002669] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002704] pid_max: default: 32768 minimum: 301 [ 0.002884] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002911] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004161] CPU: Testing write buffer coherency: ok [ 0.004666] /cpus/cpu@0 missing clock-frequency property [ 0.004706] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004761] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.007182] Brought up 1 CPUs [ 0.007216] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.007232] CPU: All CPU(s) started in SVC mode. [ 0.008562] devtmpfs: initialized [ 0.035039] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.035732] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.035781] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.035965] pinctrl core: initialized pinctrl subsystem [ 0.038024] NET: Registered protocol family 16 [ 0.038546] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.041305] cpuidle: using governor menu [ 0.076987] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.077020] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.079256] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.119778] mxs-dma 1804000.dma-apbh: initialized [ 0.124291] SCSI subsystem initialized [ 0.124917] usbcore: registered new interface driver usbfs [ 0.125076] usbcore: registered new interface driver hub [ 0.125324] usbcore: registered new device driver usb [ 0.126957] i2c-gpio i2c_rtc: using pins 48 (SDA) and 49 (SCL) [ 0.127812] i2c-gpio i2c_eeprom1: using pins 76 (SDA) and 67 (SCL) [ 0.128659] i2c-gpio i2c_eeprom2: using pins 70 (SDA) and 71 (SCL) [ 0.130165] i2c i2c-1: IMX I2C adapter registered [ 0.130209] i2c i2c-1: can't use DMA, using PIO instead. [ 0.130627] pps_core: LinuxPPS API ver. 1 registered [ 0.130649] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.130705] PTP clock support registered [ 0.133121] clocksource: Switched to clocksource mxc_timer1 [ 0.157255] NET: Registered protocol family 2 [ 0.158497] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.158707] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.159000] TCP: Hash tables configured (established 8192 bind 8192) [ 0.159143] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.159229] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.159571] NET: Registered protocol family 1 [ 0.160432] RPC: Registered named UNIX socket transport module. [ 0.160464] RPC: Registered udp transport module. [ 0.160478] RPC: Registered tcp transport module. [ 0.160493] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.734317] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 0.749292] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.751357] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.761816] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.761851] io scheduler noop registered (default) [ 0.767421] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.767463] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.776625] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 18, base_baud = 5000000) is a IMX [ 1.328995] console [ttymxc0] enabled [ 1.334638] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 55, base_baud = 5000000) is a IMX [ 1.344945] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 56, base_baud = 5000000) is a IMX [ 1.387744] imx_rngc 2284000.rngb: Freescale RNGC registered. [ 1.422810] brd: module loaded [ 1.441959] loop: module loaded [ 1.450231] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.461674] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.469272] libphy: Fixed MDIO Bus: probed [ 1.475803] 20b4000.ethernet supply phy not found, using dummy regulator [ 1.483868] pps pps0: new PPS source ptp0 [ 1.517451] libphy: fec_enet_mii_bus: probed [ 1.523075] fec 20b4000.ethernet eth0: registered PHC device 0 [ 1.643211] 2188000.ethernet supply phy not found, using dummy regulator [ 1.764196] pps pps1: new PPS source ptp1 [ 1.769257] libphy: fec_enet_mii_bus: probed [ 1.776385] fec 2188000.ethernet eth1: registered PHC device 1 [ 1.782802] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.789508] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.795337] usbcore: registered new interface driver cdc_acm [ 1.801033] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.809398] usbcore: registered new interface driver usb-storage [ 1.872709] rtc-pcf8563 4-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 1.888983] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 [ 1.898117] i2c /dev entries driver [ 1.906404] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.913924] imx6ul-pinctrl 20e0000.iomuxc: pin MX6UL_PAD_SD1_DATA1 already requested by watchdog; cannot claim for watchdog_6x [ 1.925465] imx6ul-pinctrl 20e0000.iomuxc: pin-114 (watchdog_6x) status -22 [ 1.932469] imx6ul-pinctrl 20e0000.iomuxc: could not request pin 114 (MX6UL_PAD_SD1_DATA1) from group wdggrp_6x on device 20e0000.iomuxc [ 1.944893] gpio-wdt watchdog_6x: Error applying setting, reverse things back [ 1.952085] gpio-wdt: probe of watchdog_6x failed with error -22 [ 1.959897] sdhci: Secure Digital Host Controller Interface driver [ 1.966225] sdhci: Copyright(c) Pierre Ossman [ 1.970610] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.043189] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.062815] ledtrig-cpu: registered to indicate activity on CPUs [ 2.072831] random: fast init done [ 2.090956] usbcore: registered new interface driver usbhid [ 2.098726] usbhid: USB HID core driver [ 2.113033] NET: Registered protocol family 17 [ 2.124045] Registering SWP/SWPB emulation handler [ 2.131104] registered taskstats version 1 [ 2.148273] imx_thermal 2000000.aips-bus:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 2.172686] rtc-pcf8563 4-0051: setting system clock to 2024-06-26 16:07:09 UTC (1719418029) [ 2.181182] of_cfs_init [ 2.183829] of_cfs_init: OK [ 2.197942] vdd3p0: disabling [ 2.203164] vref-3v3: disabling [ 2.206325] usb1_vbus: disabling [ 2.212184] mmc0: new DDR MMC card at address 0001 [ 2.223222] Freeing unused kernel memory: 5120K (b0800000 - b0d00000) [ 2.233358] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 2.240574] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 2.253848] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 2.268247] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB [ 2.283977] mmcblk0: p1 p2 p3 p4 < p5 p6 > mount: mounting none on /dev/pts failed: No such file or directory Boot mode: update_auto Board is WB6, loading ci_hdrc_imx module [ 2.545987] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.550936] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.583173] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.588884] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.595741] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.602972] usb usb1: Product: EHCI Host Controller [ 2.607904] usb usb1: Manufacturer: Linux 4.9.22-wb6_initramfs ehci_hcd [ 2.614567] usb usb1: SerialNumber: ci_hdrc.0 [ 2.620423] hub 1-0:1.0: USB hub found [ 2.624424] hub 1-0:1.0: 1 port detected [ 2.629912] 2184200.usb supply vbus not found, using dummy regulator [ 2.640630] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.645726] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 2.673215] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.678998] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.685875] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.693162] usb usb2: Product: EHCI Host Controller [ 2.698057] usb usb2: Manufacturer: Linux 4.9.22-wb6_initramfs ehci_hcd [ 2.704744] usb usb2: SerialNumber: ci_hdrc.1 [ 2.710533] hub 2-0:1.0: USB hub found [ 2.714534] hub 2-0:1.0: 1 port detected [ 2.983263] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.073294] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 3.175257] usb 1-1: New USB device found, idVendor=1609, idProduct=3a04 [ 3.182084] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.189458] usb 1-1: Product: USB Disk [ 3.193352] usb 1-1: Manufacturer: Flash [ 3.197325] usb 1-1: SerialNumber: 3727024D981D315511781 [ 3.206327] usb-storage 1-1:1.0: USB Mass Storage device detected [ 3.213428] scsi host0: usb-storage 1-1:1.0 [ 3.263903] usb 2-1: New USB device found, idVendor=0424, idProduct=2514 [ 3.270675] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.279609] hub 2-1:1.0: USB hub found [ 3.283771] hub 2-1:1.0: 4 ports detected [ 3.603333] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 3.755814] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720 [ 3.762816] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.770435] usb 2-1.1: Product: 802.11n WLAN Adapter [ 3.775537] usb 2-1.1: Manufacturer: Realtek [ 3.779857] usb 2-1.1: SerialNumber: 00e04c000001 1+0 records in 1+0 records out 1024 bytes (1.0 kB, 1.0 KiB) copied, 0.000310708 s, 3.3 MB/s Wait for eMMC to become available... Activate Mass Storage device [ 4.016505] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of pending drivers [ 4.244827] scsi 0:0:0:0: Direct-Access Flash USB Disk 6.90 PQ: 0 ANSI: 2 [ 4.255555] sd 0:0:0:0: [sda] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB) [ 4.265657] sd 0:0:0:0: [sda] Write Protect is off [ 4.271130] sd 0:0:0:0: [sda] No Caching mode page found [ 4.276624] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.317959] sda: sda1 [ 4.324255] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 13.530659] usb 1-1: USB disconnect, device number 2 [ OK ] Stopped Daily apt upgrade and clean activities. Stopping Session c1 of user root. [ OK ] Stopped target Bluetooth. Stopping Bluetooth service... [ OK ] Stopped Daily apt download activities. [ OK ] Stopped target System Time Synchronized. [ OK ] Stopped Bluetooth service. [ OK ] Stopped Session c1 of user root. [ OK ] Stopped Session c2 of user root. [ OK ] Stopped watchdog daemon. [ OK ] Stopped User Manager for UID 0. [ OK ] Stopped target Multi-User System. Stopping Kernel 1-Wire MQTT driver for WB-HomA... Stopping D-Bus System Message Bus... Stopping metrics sender.... Stopping Initialize Wiren Board on successful boot... [ OK ] Stopped Compensation of systime in … device-tree (with opposite sign). [ OK ] Stopped KNXD Configurator for Wiren Board. Stopping System Logging Service... Stopping Wiren Board MQTT KNX bridge... Stopping MQTT Driver for ADC... Stopping Wiren Board database logger... Stopping Wiren Board MQTT to Modbus TC Stopping Serial Getty on ttymxc0... Stopping Cgroup management daemon... Stopping MQTT Driver for GPIO-controlled switches... Stopping LSB: Brings up/down network automatically... Stopping Wiren Board journald to MQTT gateway... Stopping Avahi mDNS/DNS-SD Stack... Stopping Wiren Board MQTT to OPC UA gateway... [ OK ] Stopped Restore local date from Wiren Board GSM RTC. Stopping Wiren Board firmware update service... Stopping Regular background program processing daemon... Stopping ZeroTier One... [ OK ] Removed slice User Slice of root. Stopping Login Service... [ OK ] Stopped Login Service. [ OK ] Stopped Cgroup management daemon. [ OK ] Stopped System Logging Service. [ OK ] Stopped Regular background program processing daemon. [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped Wiren Board firmware update service. [ OK ] Stopped Avahi mDNS/DNS-SD Stack. [ OK ] Stopped Wiren Board MQTT to OPC UA gateway. [ OK ] Stopped [ 162.973207] random: crng init done metrics sender.. [ OK ] Stopped [ OK ] Stopped Serial Getty on ttymxc0. [ OK ] Stopped MQTT Driver for ADC. [ OK ] Stopped Wiren Board MQTT to Modbus TCP gateway. [ OK ] Stopped Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Stopped Wiren Board journald to MQTT gateway. [ OK ] Stopped Wiren Board database logger. [ OK ] Stopped MQTT Driver for GPIO-controlled switches. [ OK ] Removed slice system-serial\x2dgetty.slice. [ OK ] Removed slice system-getty.slice. Stopping Permit User Sessions... [ OK ] Stopped LSB: Brings up/down network automatically. [ OK ] Stopped Permit User Sessions. [ OK ] Stopped ZeroTier One. [ OK ] Stopped Wiren Board MQTT KNX bridge. [ OK ] Stopped Initialize Wiren Board on successful boot. Stopping LSB: Start NTP daemon... Stopping OpenBSD Secure Shell server... Stopping A high performance web server and a reverse proxy server... [ OK ] Stopped OpenBSD Secure Shell server. [ OK ] Stopped A high performance web server and a reverse proxy server. [ OK ] Stopped LSB: Start NTP daemon. [ OK ] Stopped target Network is Online. Stopping KNX Daemon... [ OK ] Stopped target Remote File Systems. [ OK ] Stopped KNX Daemon. [ OK ] Stopped target Network. [ OK ] Stopped initialize filesystems at first boot. Stopping Raise network interfaces... Stopping ifup for eth1... [ OK ] Stopped ifup for eth1. [ OK ] Stopped Raise network interfaces. [ OK ] Stopped target Network (Pre). Stopping netfilter persistent configuration... [ OK ] Stopped Initialize Wiren Board Device Tree overlays. Stopping watch config files... [ OK ] Stopped netfilter persistent configuration. [ OK ] Stopped watch config files. [ OK ] Stopped target Basic System. [ OK ] Stopped target Paths. [ OK ] Stopped Monitor directories with device templates for wb-mqtt-serial. [ OK ] Stopped target Slices. [ O [ 176.969 U-Boot SPL 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) DRAM init ok, rows:16, ncs:1, size: 1024MB .p0_mpdgctrl0 = 0x01170115 .p0_mpdgctrl1 = 0x0e3f0e3f .p0_mprddlctl = 0x3f3f3a3f .p0_mpwrdlctl = 0x3f3f3934 .p0_mpwldectrl0 = 0x00100012 .p0_mpwldectrl1 = 0x00130013 Trying to boot from MMC1 Warning - USDHC2 controller not supporting U-Boot 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 47C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 1 GiB MMC: FSL_SDHC: 1 In: serial Out: serial Err: serial Loading Environment from MMC... OK Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 43 = 0x2B bootcount=0 mmcpart=3 upgrade_available=0 Environment size: 43/8188 bytes ## Resetting to default environment ## Info: input data size = 43 = 0x2B Net: Could not get PHY for FEC0: addr 0 No ethernet found. Hit any key to stop autoboot: 0 ## Info: input data size = 4285 = 0x10BD switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... Bus usb@2184000: USB EHCI 1.00 Bus usb@2184200: USB EHCI 1.00 scanning bus usb@2184000 for devices... 2 USB Device(s) found scanning bus usb@2184200 for devices... EHCI timed out on TD - token=0x80008d80 USB device not accepting new address (error=22) 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Device 0: Vendor: Flash Rev: 6.90 Prod: USB Disk Type: Removable Hard Disk Capacity: 15000.0 MB = 14.6 GB (30720000 x 512) Failed to load 'wb6_update.fit' 1 bytes read in 3 ms (0 Bytes/s) ############################## # Detected USB Flash drive with update file # Filename: wb6_update_FACTORYRESET.fit # Press a FW key if you want to update firmware from this file # or wait 3 seconds to boot normally. ############################## No USB update detected, continuing boot 323 bytes read in 3 ms (104.5 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 6304472 bytes read in 275 ms (21.9 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt imx6ul-wirenboard690 47776 bytes read in 6 ms (7.6 MiB/s) 485 bytes read in 4 ms (118.2 KiB/s) Applying DT overlay wb6-nogsm 597 bytes read in 4 ms (145.5 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu 509 bytes read in 4 ms (124 KiB/s) Applying DT overlay wb6-noradio 334 bytes read in 4 ms (81.1 KiB/s) Applying DT overlay wb6-eth1 254 bytes read in 3 ms (82 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x82000000 [ 0x000000 - 0x6032d8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to bef77000, end bef99fff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb164 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Fri Mar 22 15:01:15 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 6.9.0 (i.MX6UL/ULL) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 259840 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1008652K/1048576K available (8192K kernel code, 728K rwdata, 2776K rodata, 1024K init, 283K bss, 23540K reserved, 16384K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x234/0x3dc with crng_init=0 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000018] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000058] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002801] Console: colour dummy device 80x30 [ 0.002867] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002908] pid_max: default: 32768 minimum: 301 [ 0.003326] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003369] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005100] CPU: Testing write buffer coherency: ok [ 0.006342] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.007352] devtmpfs: initialized [ 0.025352] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.025866] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.025911] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.027291] pinctrl core: initialized pinctrl subsystem [ 0.029314] NET: Registered protocol family 16 [ 0.031628] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.033642] thermal_sys: Registered thermal governor 'step_wise' [ 0.033932] cpuidle: using governor menu [ 0.221672] vdd1p1: supplied by regulator-dummy [ 0.233751] vdd3p0: supplied by regulator-dummy [ 0.245869] cpu: supplied by regulator-dummy [ 0.258047] vddsoc: supplied by regulator-dummy [ 0.600515] No ATAGs? [ 0.600576] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.600599] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.601208] debugfs: Directory 'dummy-iomuxc-gpr@20e4000' with parent 'regmap' already present! [ 0.601872] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.603422] imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000 [ 0.603464] imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl driver [ 0.646336] mxs-dma 1804000.dma-apbh: initialized [ 0.651600] SCSI subsystem initialized [ 0.652084] usbcore: registered new interface driver usbfs [ 0.652211] usbcore: registered new interface driver hub [ 0.652341] usbcore: registered new device driver usb [ 0.653186] gpio-48 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.653315] gpio-49 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.654722] i2c-gpio i2c_rtc: using lines 48 (SDA) and 49 (SCL) [ 0.655610] gpio-76 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.655737] gpio-67 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.656329] i2c-gpio i2c_eeprom1: using lines 76 (SDA) and 67 (SCL) [ 0.657025] gpio-70 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.657145] gpio-71 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.657740] i2c-gpio i2c_eeprom2: using lines 70 (SDA) and 71 (SCL) [ 0.659331] gpio-30 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.659689] i2c i2c-1: IMX I2C adapter registered [ 0.660423] mc: Linux media interface: v0.10 [ 0.660535] videodev: Linux video capture interface: v2.00 [ 0.660666] pps_core: LinuxPPS API ver. 1 registered [ 0.660688] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.660739] PTP clock support registered [ 0.661374] Advanced Linux Sound Architecture Driver Initialized. [ 0.663590] clocksource: Switched to clocksource mxc_timer1 [ 0.681281] NET: Registered protocol family 2 [ 0.682559] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.682661] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.682840] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.683027] TCP: Hash tables configured (established 8192 bind 8192) [ 0.683250] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.683324] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.683826] NET: Registered protocol family 1 [ 0.684762] RPC: Registered named UNIX socket transport module. [ 0.684800] RPC: Registered udp transport module. [ 0.684819] RPC: Registered tcp transport module. [ 0.684838] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.685919] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.688740] Initialise system trusted keyrings [ 0.689204] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.700910] NFS: Registering the id_resolver key type [ 0.700996] Key type id_resolver registered [ 0.701015] Key type id_legacy registered [ 0.941651] Key type asymmetric registered [ 0.941691] Asymmetric key parser 'x509' registered [ 0.941815] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.941838] io scheduler mq-deadline registered [ 0.941856] io scheduler kyber registered [ 0.953949] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.953996] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.957907] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 21, base_baud = 5000000) is a IMX [ 1.620924] printk: console [ttymxc0] enabled [ 1.627424] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59, base_baud = 5000000) is a IMX [ 1.671287] imx_rngc 2284000.rng: Freescale RNGB registered (HW revision 2.129) [ 1.678725] random: fast init done [ 1.682678] random: crng init done [ 1.722894] brd: module loaded [ 1.741167] loop: module loaded [ 1.744776] at24 5-0050: supply vcc not found, using dummy regulator [ 1.756221] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.763182] at24 6-0050: supply vcc not found, using dummy regulator [ 1.774594] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.787039] libphy: Fixed MDIO Bus: probed [ 1.914282] pps pps0: new PPS source ptp0 [ 1.920761] libphy: fec_enet_mii_bus: probed [ 1.929572] fec 20b4000.ethernet ethFEC0: registered PHC device 0 [ 2.054286] pps pps1: new PPS source ptp1 [ 2.095367] libphy: fec_enet_mii_bus: probed [ 2.100657] fec 2188000.ethernet ethFEC1: registered PHC device 1 [ 2.107754] PPP generic driver version 2.4.2 [ 2.112445] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.119084] ehci-mxc: Freescale On-Chip EHCI Host driver [ 2.124833] usbcore: registered new interface driver usb-storage [ 2.131079] usbcore: registered new interface driver usbserial_generic [ 2.137757] usbserial: USB Serial support registered for generic [ 2.199405] rtc-pcf8563 4-0051: registered as rtc0 [ 2.216225] rtc-pcf8563 4-0051: setting system clock to 2024-06-26T16:10:26 UTC (1719418226) [ 2.234987] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc1 [ 2.241427] i2c /dev entries driver [ 2.248250] lm75 4-0048: supply vs not found, using dummy regulator [ 2.259924] lm75 4-0048: hwmon0: sensor 'lm75b' [ 2.379966] sdhci: Secure Digital Host Controller Interface driver [ 2.386250] sdhci: Copyright(c) Pierre Ossman [ 2.390621] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.404642] ledtrig-cpu: registered to indicate activity on CPUs [ 2.412416] usbcore: registered new interface driver usbhid [ 2.418090] usbhid: USB HID core driver [ 2.433331] Initializing XFRM netlink socket [ 2.437785] mmc0: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 2.446073] NET: Registered protocol family 10 [ 2.453905] Segment Routing with IPv6 [ 2.458064] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.466147] NET: Registered protocol family 17 [ 2.471255] Key type dns_resolver registered [ 2.479668] registered taskstats version 1 [ 2.484455] Loading compiled-in X.509 certificates [ 2.507385] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 2.519319] of_cfs_init [ 2.522080] of_cfs_init: OK [ 2.530021] ALSA device list: [ 2.533025] No soundcards found. [ 2.536783] Waiting for root device /dev/mmcblk0p3... [ 2.546367] mmc0: new DDR MMC card at address 0001 [ 2.552095] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 2.557160] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 2.563477] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 2.569814] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB, chardev (245:0) [ 2.580577] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.601111] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem [ 2.608527] EXT4-fs (mmcblk0p3): write access will be enabled during recovery [ 3.224758] EXT4-fs (mmcblk0p3): recovery complete [ 3.232239] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 3.240860] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 3.249100] devtmpfs: mounted [ 3.254559] Freeing unused kernel memory: 1024K [ 3.259479] Run /sbin/init as init process [ 3.710528] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 3.735999] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 3.774991] systemd[1]: Set hostname to . [ 5.430203] systemd[1]: Queued start job for default target Graphical Interface. [ 5.445802] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.488640] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.527497] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.568015] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.609826] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.645963] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.684809] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.726728] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.740684] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.784681] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.814429] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.855114] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.889771] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.924745] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 5.990662] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.001443] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.035673] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.076726] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.117139] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. U-Boot SPL 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) DRAM init ok, rows:16, ncs:1, size: 1024MB .p0_mpdgctrl0 = 0x01160113 .p0_mpdgctrl1 = 0x0e3f0e3f .p0_mprddlctl = 0x3f3f3b3f .p0_mpwrdlctl = 0x3f3f3632 .p0_mpwldectrl0 = 0x00100012 .p0_mpwldectrl1 = 0x00130013 Trying to boot from MMC1 Warning - USDHC2 controller not supporting U-Boot 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 47C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 1 GiB MMC: FSL_SDHC: 1 In: serial Out: serial Err: serial Loading Environment from MMC... OK Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 43 = 0x2B bootcount=0 mmcpart=3 upgrade_available=0 Environment size: 43/8188 bytes ## Resetting to default environment ## Info: input data size = 43 = 0x2B Net: Could not get PHY for FEC0: addr 0 No ethernet found. Hit any key to stop autoboot: 0 ## Info: input data size = 4285 = 0x10BD switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ............... Entering firmware update mode. Checking if ubootenv part is present ## Loading FIT header to 0x82000000 ... ## Loading FIT strings to 0x82000028 ... ## Loading FIT struct to 0x82000100 ... Can't find subimage 'ubootenv' Extracting kernel ## Loading FIT header to 0x82000000 ... ## Loading FIT strings to 0x82000028 ... ## Loading FIT struct to 0x82000100 ... 7937936 bytes read in 364 ms (20.8 MiB/s) Description: Update kernel Type: Kernel Image Compression: uncompressed Data Start: 0x82000300 Data Size: 7928976 Bytes = 7.6 MiB Architecture: ARM OS: Linux Load Address: unavailable Entry Point: unavailable Hash algo: sha1 Hash value: 47f6419e0d5d8326c41b16761827dc3d746fec78 ## Verifying ... sha1+ Loading part 0 ... OK Extracting DTB ## Loading FIT header to 0x83000000 ... ## Loading FIT strings to 0x83000028 ... ## Loading FIT struct to 0x83000100 ... 55849 bytes read in 30 ms (1.8 MiB/s) Description: Update DTB Type: Flat Device Tree Compression: uncompressed Data Start: 0x83000480 Data Size: 46505 Bytes = 45.4 KiB Architecture: ARM Hash algo: sha1 Hash value: ef9dd3fe2b348fb8eb9f150b9dc2e27d6899e823 ## Verifying ... sha1+ Loading part 0 ... OK Kernel image @ 0x82000000 [ 0x000000 - 0x78fc90 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to bef8c000, end bef9a5a8 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.22-wb6_initramfs (root@WB-buildserver) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) ) #2 SMP Tue Feb 1 16:52:01 MSK 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Wiren Board init (i.MX6UL/ULL) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] percpu: Embedded 14 pages/cpu @ef7d0000 s25932 r8192 d23220 u57344 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: console=ttymxc0,115200 bootmode=update_auto [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1026552K/1048576K available (5120K kernel code, 202K rwdata, 1576K rodata, 5120K init, 295K bss, 22024K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xb0000000 - 0xf0000000 (1024 MB) [ 0.000000] modules : 0xaf000000 - 0xb0000000 ( 16 MB) [ 0.000000] .text : 0xb0008000 - 0xb0600000 (6112 kB) [ 0.000000] .init : 0xb0800000 - 0xb0d00000 (5120 kB) [ 0.000000] .data : 0xb0d00000 - 0xb0d32880 ( 203 kB) [ 0.000000] .bss : 0xb0d34000 - 0xb0d7ddb0 ( 296 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000053] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002631] Console: colour dummy device 80x30 [ 0.002675] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002709] pid_max: default: 32768 minimum: 301 [ 0.002889] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002914] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004182] CPU: Testing write buffer coherency: ok [ 0.004686] /cpus/cpu@0 missing clock-frequency property [ 0.004724] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004782] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.007184] Brought up 1 CPUs [ 0.007220] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.007234] CPU: All CPU(s) started in SVC mode. [ 0.008558] devtmpfs: initialized [ 0.035041] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.035741] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.035791] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.035973] pinctrl core: initialized pinctrl subsystem [ 0.038028] NET: Registered protocol family 16 [ 0.038547] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.041301] cpuidle: using governor menu [ 0.077083] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.077115] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.079351] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.119997] mxs-dma 1804000.dma-apbh: initialized [ 0.124520] SCSI subsystem initialized [ 0.125142] usbcore: registered new interface driver usbfs [ 0.125304] usbcore: registered new interface driver hub [ 0.125554] usbcore: registered new device driver usb [ 0.127191] i2c-gpio i2c_rtc: using pins 48 (SDA) and 49 (SCL) [ 0.128041] i2c-gpio i2c_eeprom1: using pins 76 (SDA) and 67 (SCL) [ 0.128894] i2c-gpio i2c_eeprom2: using pins 70 (SDA) and 71 (SCL) [ 0.130403] i2c i2c-1: IMX I2C adapter registered [ 0.130448] i2c i2c-1: can't use DMA, using PIO instead. [ 0.130861] pps_core: LinuxPPS API ver. 1 registered [ 0.130886] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.130946] PTP clock support registered [ 0.133380] clocksource: Switched to clocksource mxc_timer1 [ 0.157468] NET: Registered protocol family 2 [ 0.158676] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.158883] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.159173] TCP: Hash tables configured (established 8192 bind 8192) [ 0.159315] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.159400] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.159750] NET: Registered protocol family 1 [ 0.160612] RPC: Registered named UNIX socket transport module. [ 0.160646] RPC: Registered udp transport module. [ 0.160662] RPC: Registered tcp transport module. [ 0.160676] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.734295] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 0.749269] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.751348] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.761809] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.761845] io scheduler noop registered (default) [ 0.767382] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.767424] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.776578] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 18, base_baud = 5000000) is a IMX [ 1.328951] console [ttymxc0] enabled [ 1.334601] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 55, base_baud = 5000000) is a IMX [ 1.344901] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 56, base_baud = 5000000) is a IMX [ 1.387692] imx_rngc 2284000.rngb: Freescale RNGC registered. [ 1.422687] brd: module loaded [ 1.441803] loop: module loaded [ 1.450079] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.461528] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.469116] libphy: Fixed MDIO Bus: probed [ 1.475657] 20b4000.ethernet supply phy not found, using dummy regulator [ 1.483726] pps pps0: new PPS source ptp0 [ 1.517065] libphy: fec_enet_mii_bus: probed [ 1.522691] fec 20b4000.ethernet eth0: registered PHC device 0 [ 1.643469] 2188000.ethernet supply phy not found, using dummy regulator [ 1.764444] pps pps1: new PPS source ptp1 [ 1.769520] libphy: fec_enet_mii_bus: probed [ 1.776683] fec 2188000.ethernet eth1: registered PHC device 1 [ 1.783096] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.789802] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.795636] usbcore: registered new interface driver cdc_acm [ 1.801334] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.809700] usbcore: registered new interface driver usb-storage [ 1.873084] rtc-pcf8563 4-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 1.889328] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 [ 1.898457] i2c /dev entries driver [ 1.906739] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.914255] imx6ul-pinctrl 20e0000.iomuxc: pin MX6UL_PAD_SD1_DATA1 already requested by watchdog; cannot claim for watchdog_6x [ 1.925795] imx6ul-pinctrl 20e0000.iomuxc: pin-114 (watchdog_6x) status -22 [ 1.932800] imx6ul-pinctrl 20e0000.iomuxc: could not request pin 114 (MX6UL_PAD_SD1_DATA1) from group wdggrp_6x on device 20e0000.iomuxc [ 1.945224] gpio-wdt watchdog_6x: Error applying setting, reverse things back [ 1.952417] gpio-wdt: probe of watchdog_6x failed with error -22 [ 1.960193] sdhci: Secure Digital Host Controller Interface driver [ 1.966520] sdhci: Copyright(c) Pierre Ossman [ 1.970907] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.043449] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.063078] ledtrig-cpu: registered to indicate activity on CPUs [ 2.073076] random: fast init done [ 2.091227] usbcore: registered new interface driver usbhid [ 2.098991] usbhid: USB HID core driver [ 2.113298] NET: Registered protocol family 17 [ 2.124326] Registering SWP/SWPB emulation handler [ 2.131413] registered taskstats version 1 [ 2.148583] imx_thermal 2000000.aips-bus:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 2.173046] rtc-pcf8563 4-0051: setting system clock to 2024-06-26 16:10:47 UTC (1719418247) [ 2.181540] of_cfs_init [ 2.184189] of_cfs_init: OK [ 2.198245] vdd3p0: disabling [ 2.203464] vref-3v3: disabling [ 2.206624] usb1_vbus: disabling [ 2.212483] mmc0: new DDR MMC card at address 0001 [ 2.223509] Freeing unused kernel memory: 5120K (b0800000 - b0d00000) [ 2.233595] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 2.240861] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 2.254100] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 2.268627] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB [ 2.284407] mmcblk0: p1 p2 p3 p4 < p5 p6 > mount: mounting none on /dev/pts failed: No such file or directory Boot mode: update_auto Board is WB6, loading ci_hdrc_imx module [ 2.545703] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.550650] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.583429] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.589131] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.595990] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.603222] usb usb1: Product: EHCI Host Controller [ 2.608154] usb usb1: Manufacturer: Linux 4.9.22-wb6_initramfs ehci_hcd [ 2.614815] usb usb1: SerialNumber: ci_hdrc.0 [ 2.620659] hub 1-0:1.0: USB hub found [ 2.624661] hub 1-0:1.0: 1 port detected [ 2.630134] 2184200.usb supply vbus not found, using dummy regulator [ 2.640852] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.645952] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 2.673463] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.679244] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.686128] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.693415] usb usb2: Product: EHCI Host Controller [ 2.698310] usb usb2: Manufacturer: Linux 4.9.22-wb6_initramfs ehci_hcd [ 2.705001] usb usb2: SerialNumber: ci_hdrc.1 [ 2.710786] hub 2-0:1.0: USB hub found [ 2.714785] hub 2-0:1.0: 1 port detected [ 2.983529] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.073534] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 3.175466] usb 1-1: New USB device found, idVendor=1609, idProduct=3a04 [ 3.182289] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.189656] usb 1-1: Product: USB Disk [ 3.193550] usb 1-1: Manufacturer: Flash [ 3.197522] usb 1-1: SerialNumber: 3727024D981D315511781 [ 3.206556] usb-storage 1-1:1.0: USB Mass Storage device detected [ 3.213667] scsi host0: usb-storage 1-1:1.0 [ 3.264132] usb 2-1: New USB device found, idVendor=0424, idProduct=2514 [ 3.270907] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.279836] hub 2-1:1.0: USB hub found [ 3.283995] hub 2-1:1.0: 4 ports detected [ 3.603599] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 3.756042] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720 [ 3.763051] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.770675] usb 2-1.1: Product: 802.11n WLAN Adapter [ 3.775790] usb 2-1.1: Manufacturer: Realtek [ 3.780111] usb 2-1.1: SerialNumber: 00e04c000001 1+0 records in 1+0 records out 1024 bytes (1.0 kB, 1.0 KiB) copied, 0.000310375 s, 3.3 MB/s Wait for eMMC to become available... Activate Mass Storage device [ 4.016603] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of pending drivers [ 4.245161] scsi 0:0:0:0: Direct-Access Flash USB Disk 6.90 PQ: 0 ANSI: 2 [ 4.255883] sd 0:0:0:0: [sda] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB) [ 4.265867] sd 0:0:0:0: [sda] Write Protect is off [ 4.271348] sd 0:0:0:0: [sda] No Caching mode page found [ 4.276843] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.289403] sda: sda1 [ 4.295836] sd 0:0:0:0: [sda] Attached SCSI removable disk [ OK ] Started Modem Manager. [ OK ] Started Hostname Service. [ OK ] Finished initialize filesystems at first boot. [ OK ] Reached target First Boot Complete. Starting Avahi mDNS/DNS-SD Stack... Starting Commit a transient machine-id on disk... [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Finished Commit a transient machine-id on disk. [ OK ] Started Network Manager. Starting Network Manager Wait Online... Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ 40.460618] RTL871X: assoc success [ 40.481910] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ OK ] Finished Network Manager Wait Online. [ 47.358281] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 224, base_baud = 5000000) is a IMX [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ INFO ] Skipped Power on GSM modem. [ **] (2 of 2) A start job is running for…k interfaces (1min 48s / 5min 43s) [ 114.434333] SMSC LAN8710/LAN8720 20b4000.ethernet-1:00: attached PHY driver [SMSC LAN8710/ [*** ] (1 of 2) A start job is running for… Wiren Board (1min 50s / no limit) [ 116.564358] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started KNX Daemon. [ OK ] Finished KNXD Configurator for Wiren Board. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [ OK ] Reached target Network is Online. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Getty on tty1. Starting LSB: Brings up/down network automatically... Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttymxc0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Started OpenBSD Secure Shell server. [ 125.938085] process '/usr/sbin/netplugd' started with executable stack [ OK ] Finished Compensation of s…ice-tree (with opposite sign). [ OK ] Started Mosquitto MQTT Broker. [ OK ] Started Wiren Board modbus devices manager. [ 126.483981] SMSC LAN8710/LAN8720 20b4000.ethernet-1:01: attached PHY driver [SMSC LAN8710/ LAN8720] (mii_bus:phy_addr=20b4000.ethernet-1:01, irq=POLL) [ OK ] Started one-click diagnost… generating archive with data.^[[ 9 U-Boot SPL 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) DRAM init ok, rows:16, ncs:1, size: 1024MB .p0_mpdgctrl0 = 0x01150112 .p0_mpdgctrl1 = 0x0e3f0e3f .p0_mprddlctl = 0x3f3f3c3f .p0_mpwrdlctl = 0x3f3f3632 .p0_mpwldectrl0 = 0x00100012 .p0_mpwldectrl1 = 0x00130013 Trying to boot from MMC1 Warning - USDHC2 controller not supporting U-Boot 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 46C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 1 GiB MMC: FSL_SDHC: 1 In: serial Out: serial Err: serial Loading Environment from MMC... OK Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 43 = 0x2B bootcount=0 mmcpart=3 upgrade_available=0 Environment size: 43/8188 bytes ## Resetting to default environment ## Info: input data size = 43 = 0x2B Net: Could not get PHY for FEC0: addr 0 No ethernet found. Hit any key to stop autoboot: 0 ## Info: input data size = 4285 = 0x10BD switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode Entering firmware update mode. Checking if ubootenv part is present ## Loading FIT header to 0x82000000 ... ## Loading FIT strings to 0x82000028 ... ## Loading FIT struct to 0x82000100 ... Can't find subimage 'ubootenv' Extracting kernel ## Loading FIT header to 0x82000000 ... ## Loading FIT strings to 0x82000028 ... ## Loading FIT struct to 0x82000100 ... 7937936 bytes read in 364 ms (20.8 MiB/s) Description: Update kernel Type: Kernel Image Compression: uncompressed Data Start: 0x82000300 Data Size: 7928976 Bytes = 7.6 MiB Architecture: ARM OS: Linux Load Address: unavailable Entry Point: unavailable Hash algo: sha1 Hash value: 47f6419e0d5d8326c41b16761827dc3d746fec78 ## Verifying ... sha1+ Loading part 0 ... OK Extracting DTB ## Loading FIT header to 0x83000000 ... ## Loading FIT strings to 0x83000028 ... ## Loading FIT struct to 0x83000100 ... 55849 bytes read in 30 ms (1.8 MiB/s) Description: Update DTB Type: Flat Device Tree Compression: uncompressed Data Start: 0x83000480 Data Size: 46505 Bytes = 45.4 KiB Architecture: ARM Hash algo: sha1 Hash value: ef9dd3fe2b348fb8eb9f150b9dc2e27d6899e823 ## Verifying ... sha1+ Loading part 0 ... OK Kernel image @ 0x82000000 [ 0x000000 - 0x78fc90 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to bef8c000, end bef9a5a8 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.22-wb6_initramfs (root@WB-buildserver) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) ) #2 SMP Tue Feb 1 16:52:01 MSK 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Wiren Board init (i.MX6UL/ULL) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] percpu: Embedded 14 pages/cpu @ef7d0000 s25932 r8192 d23220 u57344 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: console=ttymxc0,115200 bootmode=update_auto [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1026552K/1048576K available (5120K kernel code, 202K rwdata, 1576K rodata, 5120K init, 295K bss, 22024K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xb0000000 - 0xf0000000 (1024 MB) [ 0.000000] modules : 0xaf000000 - 0xb0000000 ( 16 MB) [ 0.000000] .text : 0xb0008000 - 0xb0600000 (6112 kB) [ 0.000000] .init : 0xb0800000 - 0xb0d00000 (5120 kB) [ 0.000000] .data : 0xb0d00000 - 0xb0d32880 ( 203 kB) [ 0.000000] .bss : 0xb0d34000 - 0xb0d7ddb0 ( 296 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000054] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002622] Console: colour dummy device 80x30 [ 0.002662] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002697] pid_max: default: 32768 minimum: 301 [ 0.002880] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002906] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004154] CPU: Testing write buffer coherency: ok [ 0.004661] /cpus/cpu@0 missing clock-frequency property [ 0.004700] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004756] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.007168] Brought up 1 CPUs [ 0.007204] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.007220] CPU: All CPU(s) started in SVC mode. [ 0.008551] devtmpfs: initialized [ 0.035010] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.035711] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.035763] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.035946] pinctrl core: initialized pinctrl subsystem [ 0.038016] NET: Registered protocol family 16 [ 0.038536] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.041274] cpuidle: using governor menu [ 0.077030] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.077063] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.079295] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.119990] mxs-dma 1804000.dma-apbh: initialized [ 0.124517] SCSI subsystem initialized [ 0.125136] usbcore: registered new interface driver usbfs [ 0.125298] usbcore: registered new interface driver hub [ 0.125544] usbcore: registered new device driver usb [ 0.127185] i2c-gpio i2c_rtc: using pins 48 (SDA) and 49 (SCL) [ 0.128035] i2c-gpio i2c_eeprom1: using pins 76 (SDA) and 67 (SCL) [ 0.128894] i2c-gpio i2c_eeprom2: using pins 70 (SDA) and 71 (SCL) [ 0.130406] i2c i2c-1: IMX I2C adapter registered [ 0.130452] i2c i2c-1: can't use DMA, using PIO instead. [ 0.130866] pps_core: LinuxPPS API ver. 1 registered [ 0.130890] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.130948] PTP clock support registered [ 0.133383] clocksource: Switched to clocksource mxc_timer1 [ 0.157491] NET: Registered protocol family 2 [ 0.158704] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.158911] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.159204] TCP: Hash tables configured (established 8192 bind 8192) [ 0.159346] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.159431] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.159766] NET: Registered protocol family 1 [ 0.160623] RPC: Registered named UNIX socket transport module. [ 0.160656] RPC: Registered udp transport module. [ 0.160670] RPC: Registered tcp transport module. [ 0.160687] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.734399] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 0.749365] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.751442] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.761930] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.761965] io scheduler noop registered (default) [ 0.767514] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.767558] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.776708] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 18, base_baud = 5000000) is a IMX [ 1.329089] console [ttymxc0] enabled [ 1.334726] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 55, base_baud = 5000000) is a IMX [ 1.345022] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 56, base_baud = 5000000) is a IMX [ 1.387833] imx_rngc 2284000.rngb: Freescale RNGC registered. [ 1.422784] brd: module loaded [ 1.441964] loop: module loaded [ 1.450233] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.461676] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.469266] libphy: Fixed MDIO Bus: probed [ 1.475811] 20b4000.ethernet supply phy not found, using dummy regulator [ 1.483873] pps pps0: new PPS source ptp0 [ 1.517219] libphy: fec_enet_mii_bus: probed [ 1.522849] fec 20b4000.ethernet eth0: registered PHC device 0 [ 1.643472] 2188000.ethernet supply phy not found, using dummy regulator [ 1.764431] pps pps1: new PPS source ptp1 [ 1.769509] libphy: fec_enet_mii_bus: probed [ 1.776630] fec 2188000.ethernet eth1: registered PHC device 1 [ 1.783037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.789740] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.795568] usbcore: registered new interface driver cdc_acm [ 1.801268] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.809636] usbcore: registered new interface driver usb-storage [ 1.872963] rtc-pcf8563 4-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 1.889208] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 [ 1.898344] i2c /dev entries driver [ 1.906599] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.914119] imx6ul-pinctrl 20e0000.iomuxc: pin MX6UL_PAD_SD1_DATA1 already requested by watchdog; cannot claim for watchdog_6x [ 1.925658] imx6ul-pinctrl 20e0000.iomuxc: pin-114 (watchdog_6x) status -22 [ 1.932662] imx6ul-pinctrl 20e0000.iomuxc: could not request pin 114 (MX6UL_PAD_SD1_DATA1) from group wdggrp_6x on device 20e0000.iomuxc [ 1.945088] gpio-wdt watchdog_6x: Error applying setting, reverse things back [ 1.952279] gpio-wdt: probe of watchdog_6x failed with error -22 [ 1.960077] sdhci: Secure Digital Host Controller Interface driver [ 1.966405] sdhci: Copyright(c) Pierre Ossman [ 1.970792] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.043443] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.063058] ledtrig-cpu: registered to indicate activity on CPUs [ 2.073059] random: fast init done [ 2.091208] usbcore: registered new interface driver usbhid [ 2.098978] usbhid: USB HID core driver [ 2.113293] NET: Registered protocol family 17 [ 2.124319] Registering SWP/SWPB emulation handler [ 2.131393] registered taskstats version 1 [ 2.148584] imx_thermal 2000000.aips-bus:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 2.173062] rtc-pcf8563 4-0051: setting system clock to 2024-06-26 16:12:33 UTC (1719418353) [ 2.181554] of_cfs_init [ 2.184205] of_cfs_init: OK [ 2.198303] vdd3p0: disabling [ 2.203522] vref-3v3: disabling [ 2.206683] usb1_vbus: disabling [ 2.212549] mmc0: new DDR MMC card at address 0001 [ 2.223590] Freeing unused kernel memory: 5120K (b0800000 - b0d00000) [ 2.233600] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 2.243635] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 2.257333] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 2.274036] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB [ 2.287783] mmcblk0: p1 p2 p3 p4 < p5 p6 > mount: mounting none on /dev/pts failed: No such file or directory Boot mode: update_auto Board is WB6, loading ci_hdrc_imx module [ 2.546244] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.551192] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.583425] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.589127] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.595989] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.603220] usb usb1: Product: EHCI Host Controller [ 2.608157] usb usb1: Manufacturer: Linux 4.9.22-wb6_initramfs ehci_hcd [ 2.614820] usb usb1: SerialNumber: ci_hdrc.0 [ 2.620663] hub 1-0:1.0: USB hub found [ 2.624669] hub 1-0:1.0: 1 port detected [ 2.630140] 2184200.usb supply vbus not found, using dummy regulator [ 2.640856] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.645953] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 2.673471] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.679257] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.686140] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.693427] usb usb2: Product: EHCI Host Controller [ 2.698323] usb usb2: Manufacturer: Linux 4.9.22-wb6_initramfs ehci_hcd [ 2.705017] usb usb2: SerialNumber: ci_hdrc.1 [ 2.710793] hub 2-0:1.0: USB hub found [ 2.714798] hub 2-0:1.0: 1 port detected [ 2.983519] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.073536] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 3.175379] usb 1-1: New USB device found, idVendor=1609, idProduct=3a04 [ 3.182202] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.189567] usb 1-1: Product: USB Disk [ 3.193456] usb 1-1: Manufacturer: Flash [ 3.197427] usb 1-1: SerialNumber: 3727024D981D315511781 [ 3.206469] usb-storage 1-1:1.0: USB Mass Storage device detected [ 3.213496] scsi host0: usb-storage 1-1:1.0 [ 3.264135] usb 2-1: New USB device found, idVendor=0424, idProduct=2514 [ 3.270910] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.279848] hub 2-1:1.0: USB hub found [ 3.284006] hub 2-1:1.0: 4 ports detected [ 3.603591] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 3.756045] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720 [ 3.763053] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.770672] usb 2-1.1: Product: 802.11n WLAN Adapter [ 3.775781] usb 2-1.1: Manufacturer: Realtek [ 3.780099] usb 2-1.1: SerialNumber: 00e04c000001 1+0 records in 1+0 records out 1024 bytes (1.0 kB, 1.0 KiB) copied, 0.000260041 s, 3.9 MB/s Wait for eMMC to become available... Activate Mass Storage device [ 4.016918] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of pending drivers [ 4.245068] scsi 0:0:0:0: Direct-Access Flash USB Disk 6.90 PQ: 0 ANSI: 2 [ 4.255788] sd 0:0:0:0: [sda] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB) [ 4.265899] sd 0:0:0:0: [sda] Write Protect is off [ 4.271386] sd 0:0:0:0: [sda] No Caching mode page found [ 4.276879] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.289567] sda: sda1 [ 4.295998] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 10 ▒ U-Boot SPL 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) DRAM init ok, rows:16, ncs:1, size: 1024MB .p0_mpdgctrl0 = 0x01160116 .p0_mpdgctrl1 = 0x0e3f0e3f .p0_mprddlctl = 0x3f3f3c40 .p0_mpwrdlctl = 0x3f3f3632 .p0_mpwldectrl0 = 0x00100012 .p0_mpwldectrl1 = 0x00130013 Trying to boot from MMC1 Warning - USDHC2 controller not supporting U-Boot 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 46C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 1 GiB MMC: FSL_SDHC: 1 In: serial Out: serial Err: serial Loading Environment from MMC... OK Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 43 = 0x2B bootcount=0 mmcpart=3 upgrade_available=0 Environment size: 43/8188 bytes ## Resetting to default environment ## Info: input data size = 43 = 0x2B Net: Could not get PHY for FEC0: addr 0 No ethernet found. Hit any key to stop autoboot: 0 ## Info: input data size = 4285 = 0x10BD switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode .. Entering firmware update mode. Checking if ubootenv part is present ## Loading FIT header to 0x82000000 ... ## Loading FIT strings to 0x82000028 ... ## Loading FIT struct to 0x82000100 ... Can't find subimage 'ubootenv' Extracting kernel ## Loading FIT header to 0x82000000 ... ## Loading FIT strings to 0x82000028 ... ## Loading FIT struct to 0x82000100 ... 7937936 bytes read in 364 ms (20.8 MiB/s) Description: Update kernel Type: Kernel Image Compression: uncompressed Data Start: 0x82000300 Data Size: 7928976 Bytes = 7.6 MiB Architecture: ARM OS: Linux Load Address: unavailable Entry Point: unavailable Hash algo: sha1 Hash value: 47f6419e0d5d8326c41b16761827dc3d746fec78 ## Verifying ... sha1+ Loading part 0 ... OK Extracting DTB ## Loading FIT header to 0x83000000 ... ## Loading FIT strings to 0x83000028 ... ## Loading FIT struct to 0x83000100 ... 55849 bytes read in 30 ms (1.8 MiB/s) Description: Update DTB Type: Flat Device Tree Compression: uncompressed Data Start: 0x83000480 Data Size: 46505 Bytes = 45.4 KiB Architecture: ARM Hash algo: sha1 Hash value: ef9dd3fe2b348fb8eb9f150b9dc2e27d6899e823 ## Verifying ... sha1+ Loading part 0 ... OK Kernel image @ 0x82000000 [ 0x000000 - 0x78fc90 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to bef8c000, end bef9a5a8 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.22-wb6_initramfs (root@WB-buildserver) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) ) #2 SMP Tue Feb 1 16:52:01 MSK 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Wiren Board init (i.MX6UL/ULL) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] percpu: Embedded 14 pages/cpu @ef7d0000 s25932 r8192 d23220 u57344 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: console=ttymxc0,115200 bootmode=update_auto [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1026552K/1048576K available (5120K kernel code, 202K rwdata, 1576K rodata, 5120K init, 295K bss, 22024K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xb0000000 - 0xf0000000 (1024 MB) [ 0.000000] modules : 0xaf000000 - 0xb0000000 ( 16 MB) [ 0.000000] .text : 0xb0008000 - 0xb0600000 (6112 kB) [ 0.000000] .init : 0xb0800000 - 0xb0d00000 (5120 kB) [ 0.000000] .data : 0xb0d00000 - 0xb0d32880 ( 203 kB) [ 0.000000] .bss : 0xb0d34000 - 0xb0d7ddb0 ( 296 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000054] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002626] Console: colour dummy device 80x30 [ 0.002666] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002700] pid_max: default: 32768 minimum: 301 [ 0.002882] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002907] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004157] CPU: Testing write buffer coherency: ok [ 0.004660] /cpus/cpu@0 missing clock-frequency property [ 0.004700] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004757] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.007164] Brought up 1 CPUs [ 0.007200] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.007217] CPU: All CPU(s) started in SVC mode. [ 0.008547] devtmpfs: initialized [ 0.035013] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.035705] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.035756] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.035939] pinctrl core: initialized pinctrl subsystem [ 0.038014] NET: Registered protocol family 16 [ 0.038534] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.041247] cpuidle: using governor menu [ 0.076890] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.076923] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.079149] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.119689] mxs-dma 1804000.dma-apbh: initialized [ 0.124213] SCSI subsystem initialized [ 0.124827] usbcore: registered new interface driver usbfs [ 0.124983] usbcore: registered new interface driver hub [ 0.125230] usbcore: registered new device driver usb [ 0.126889] i2c-gpio i2c_rtc: using pins 48 (SDA) and 49 (SCL) [ 0.127745] i2c-gpio i2c_eeprom1: using pins 76 (SDA) and 67 (SCL) [ 0.128602] i2c-gpio i2c_eeprom2: using pins 70 (SDA) and 71 (SCL) [ 0.130124] i2c i2c-1: IMX I2C adapter registered [ 0.130167] i2c i2c-1: can't use DMA, using PIO instead. [ 0.130585] pps_core: LinuxPPS API ver. 1 registered [ 0.130610] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.130666] PTP clock support registered [ 0.133083] clocksource: Switched to clocksource mxc_timer1 [ 0.157120] NET: Registered protocol family 2 [ 0.158368] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.158575] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.158866] TCP: Hash tables configured (established 8192 bind 8192) [ 0.159011] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.159095] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.159431] NET: Registered protocol family 1 [ 0.160305] RPC: Registered named UNIX socket transport module. [ 0.160338] RPC: Registered udp transport module. [ 0.160353] RPC: Registered tcp transport module. [ 0.160369] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.734142] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 0.749190] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.751263] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.761669] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.761706] io scheduler noop registered (default) [ 0.767287] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.767329] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.776477] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 18, base_baud = 5000000) is a IMX [ 1.328868] console [ttymxc0] enabled [ 1.334473] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 55, base_baud = 5000000) is a IMX [ 1.344775] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 56, base_baud = 5000000) is a IMX [ 1.387585] imx_rngc 2284000.rngb: Freescale RNGC registered. [ 1.422600] brd: module loaded [ 1.441695] loop: module loaded [ 1.449966] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.461405] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.468989] libphy: Fixed MDIO Bus: probed [ 1.475530] 20b4000.ethernet supply phy not found, using dummy regulator [ 1.483591] pps pps0: new PPS source ptp0 [ 1.516893] libphy: fec_enet_mii_bus: probed [ 1.522522] fec 20b4000.ethernet eth0: registered PHC device 0 [ 1.643178] 2188000.ethernet supply phy not found, using dummy regulator [ 1.764146] pps pps1: new PPS source ptp1 [ 1.769221] libphy: fec_enet_mii_bus: probed [ 1.776337] fec 2188000.ethernet eth1: registered PHC device 1 [ 1.782753] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.789454] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.795289] usbcore: registered new interface driver cdc_acm [ 1.800984] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.809346] usbcore: registered new interface driver usb-storage [ 1.872665] rtc-pcf8563 4-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 1.888914] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 [ 1.898046] i2c /dev entries driver [ 1.906275] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.913782] imx6ul-pinctrl 20e0000.iomuxc: pin MX6UL_PAD_SD1_DATA1 already requested by watchdog; cannot claim for watchdog_6x [ 1.925314] imx6ul-pinctrl 20e0000.iomuxc: pin-114 (watchdog_6x) status -22 [ 1.932319] imx6ul-pinctrl 20e0000.iomuxc: could not request pin 114 (MX6UL_PAD_SD1_DATA1) from group wdggrp_6x on device 20e0000.iomuxc [ 1.944747] gpio-wdt watchdog_6x: Error applying setting, reverse things back [ 1.951937] gpio-wdt: probe of watchdog_6x failed with error -22 [ 1.959732] sdhci: Secure Digital Host Controller Interface driver [ 1.966060] sdhci: Copyright(c) Pierre Ossman [ 1.970447] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.043154] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.062788] ledtrig-cpu: registered to indicate activity on CPUs [ 2.072808] random: fast init done [ 2.090946] usbcore: registered new interface driver usbhid [ 2.098713] usbhid: USB HID core driver [ 2.113037] NET: Registered protocol family 17 [ 2.120496] Registering SWP/SWPB emulation handler [ 2.130738] registered taskstats version 1 [ 2.146355] imx_thermal 2000000.aips-bus:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 2.169727] rtc-pcf8563 4-0051: setting system clock to 2024-06-26 16:14:33 UTC (1719418473) [ 2.178221] of_cfs_init [ 2.180854] of_cfs_init: OK [ 2.189797] vdd3p0: disabling [ 2.192885] vref-3v3: disabling [ 2.196123] usb1_vbus: disabling [ 2.205974] Freeing unused kernel memory: 5120K (b0800000 - b0d00000) [ 2.238521] mmc0: new DDR MMC card at address 0001 [ 2.253608] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 2.259839] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 2.273006] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB mount: mounting none on /dev/pts failed: No such file or directory [ 2.293450] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB [ 2.304291] mmcblk0: p1 p2 p3 p4 < p5 p6 > Boot mode: update_auto Board is WB6, loading ci_hdrc_imx module [ 2.544279] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.549230] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.583130] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.589050] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.595937] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.603212] usb usb1: Product: EHCI Host Controller [ 2.608106] usb usb1: Manufacturer: Linux 4.9.22-wb6_initramfs ehci_hcd [ 2.614778] usb usb1: SerialNumber: ci_hdrc.0 [ 2.620500] hub 1-0:1.0: USB hub found [ 2.624490] hub 1-0:1.0: 1 port detected [ 2.629966] 2184200.usb supply vbus not found, using dummy regulator [ 2.640679] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.645776] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 2.673170] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.678951] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.685857] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.693148] usb usb2: Product: EHCI Host Controller [ 2.698046] usb usb2: Manufacturer: Linux 4.9.22-wb6_initramfs ehci_hcd [ 2.704711] usb usb2: SerialNumber: ci_hdrc.1 [ 2.711112] hub 2-0:1.0: USB hub found [ 2.715071] hub 2-0:1.0: 1 port detected [ 2.983227] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.073245] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 3.175157] usb 1-1: New USB device found, idVendor=1609, idProduct=3a04 [ 3.181980] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.189343] usb 1-1: Product: USB Disk [ 3.193233] usb 1-1: Manufacturer: Flash [ 3.197208] usb 1-1: SerialNumber: 3727024D981D315511781 [ 3.206239] usb-storage 1-1:1.0: USB Mass Storage device detected [ 3.213339] scsi host0: usb-storage 1-1:1.0 [ 3.263827] usb 2-1: New USB device found, idVendor=0424, idProduct=2514 [ 3.270602] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.279535] hub 2-1:1.0: USB hub found [ 3.283692] hub 2-1:1.0: 4 ports detected [ 3.603289] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 3.755741] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720 [ 3.762748] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.770363] usb 2-1.1: Product: 802.11n WLAN Adapter [ 3.775457] usb 2-1.1: Manufacturer: Realtek [ 3.779775] usb 2-1.1: SerialNumber: 00e04c000001 1+0 records in 1+0 records out 1024 bytes (1.0 kB, 1.0 KiB) copied, 0.000356458 s, 2.9 MB/s Wait for eMMC to become available... Activate Mass Storage device [ 4.016104] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of pending drivers [ 4.244858] scsi 0:0:0:0: Direct-Access Flash USB Disk 6.90 PQ: 0 ANSI: 2 [ 4.255577] sd 0:0:0:0: [sda] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB) [ 4.265691] sd 0:0:0:0: [sda] Write Protect is off [ 4.271160] sd 0:0:0:0: [sda] No Caching mode page found [ 4.276657] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.289097] sda: sda1 [ 4.295537] sd 0:0:0:0: [sda] Attached SCSI removable disk