Ошибочная загрузка полный цикл: wirenboard-ADJZWNQD login: ▒ U-Boot 2017.03-1.1.0-gaa233c0fa3 (Jun 09 2020 - 19:28:23 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 60C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 0 Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found No storage devices, perhaps not 'usb start'ed..? No USB update detected, continuing boot switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 323 bytes read in 56 ms (4.9 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 6304488 bytes read in 407 ms (14.8 MiB/s) MMC read: dev # 0, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt imx6ul-wirenboard670 47422 bytes read in 120 ms (385.7 KiB/s) 485 bytes read in 181 ms (2 KiB/s) Applying DT overlay wb6-nogsm 597 bytes read in 205 ms (2 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu 509 bytes read in 185 ms (2 KiB/s) Applying DT overlay wb6-noradio 334 bytes read in 146 ms (2 KiB/s) Applying DT overlay wb6-eth1 254 bytes read in 83 ms (2.9 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x82000000 [ 0x000000 - 0x6032e8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 9ef32000, end 9ef54fff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb181 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Wed Jan 28 10:00:09 UTC 2026 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 6.7.0 (i.MX6UL/ULL) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait ro [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 489364K/524288K available (8192K kernel code, 728K rwdata, 2776K rodata, 1024K init, 283K bss, 18540K reserved, 16384K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x234/0x3dc with crng_init=0 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000019] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000058] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002758] Console: colour dummy device 80x30 [ 0.002820] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002859] pid_max: default: 32768 minimum: 301 [ 0.003249] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.003285] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.004960] CPU: Testing write buffer coherency: ok [ 0.006195] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.007072] devtmpfs: initialized [ 0.024731] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.025231] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.025276] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.026656] pinctrl core: initialized pinctrl subsystem [ 0.028618] NET: Registered protocol family 16 [ 0.030852] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.032794] thermal_sys: Registered thermal governor 'step_wise' [ 0.033072] cpuidle: using governor menu [ 0.215829] vdd1p1: supplied by regulator-dummy [ 0.227529] vdd3p0: supplied by regulator-dummy [ 0.239288] cpu: supplied by regulator-dummy [ 0.250992] vddsoc: supplied by regulator-dummy [ 0.587159] No ATAGs? [ 0.587217] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.587239] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.587832] debugfs: Directory 'dummy-iomuxc-gpr@20e4000' with parent 'regmap' already present! [ 0.588494] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.589963] imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000 [ 0.590003] imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl driver [ 0.632318] mxs-dma 1804000.dma-apbh: initialized [ 0.637591] SCSI subsystem initialized [ 0.638067] usbcore: registered new interface driver usbfs [ 0.638186] usbcore: registered new interface driver hub [ 0.638300] usbcore: registered new device driver usb [ 0.639155] gpio-48 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.639282] gpio-49 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.640194] i2c-gpio i2c_rtc: using lines 48 (SDA) and 49 (SCL) [ 0.640927] gpio-76 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.641047] gpio-67 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.641663] i2c-gpio i2c_eeprom1: using lines 76 (SDA) and 67 (SCL) [ 0.642360] gpio-70 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.642477] gpio-71 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.643051] i2c-gpio i2c_eeprom2: using lines 70 (SDA) and 71 (SCL) [ 0.644698] gpio-30 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.645067] i2c i2c-1: IMX I2C adapter registered [ 0.645799] mc: Linux media interface: v0.10 [ 0.645911] videodev: Linux video capture interface: v2.00 [ 0.646062] pps_core: LinuxPPS API ver. 1 registered [ 0.646085] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.646140] PTP clock support registered [ 0.646726] Advanced Linux Sound Architecture Driver Initialized. [ 0.648843] clocksource: Switched to clocksource mxc_timer1 [ 0.666590] NET: Registered protocol family 2 [ 0.667861] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.667959] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.668063] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.668166] TCP: Hash tables configured (established 4096 bind 4096) [ 0.668354] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.668408] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.668730] NET: Registered protocol family 1 [ 0.669785] RPC: Registered named UNIX socket transport module. [ 0.669824] RPC: Registered udp transport module. [ 0.669842] RPC: Registered tcp transport module. [ 0.669859] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.670923] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.673674] Initialise system trusted keyrings [ 0.674159] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.685784] NFS: Registering the id_resolver key type [ 0.685871] Key type id_resolver registered [ 0.685890] Key type id_legacy registered [ 0.920739] Key type asymmetric registered [ 0.920780] Asymmetric key parser 'x509' registered [ 0.920901] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.920924] io scheduler mq-deadline registered [ 0.920943] io scheduler kyber registered [ 0.932694] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.932743] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.936575] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 21, base_baud = 5000000) is a IMX [ 1.599352] printk: console [ttymxc0] enabled [ 1.605744] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59, base_baud = 5000000) is a IMX [ 1.649535] imx_rngc 2284000.rng: Freescale RNGB registered (HW revision 2.129) [ 1.666366] random: fast init done [ 1.670385] random: crng init done [ 1.700800] brd: module loaded [ 1.718968] loop: module loaded [ 1.722498] at24 5-0050: supply vcc not found, using dummy regulator [ 1.733945] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.740964] at24 6-0050: supply vcc not found, using dummy regulator [ 1.752339] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.764705] libphy: Fixed MDIO Bus: probed [ 1.771853] pps pps0: new PPS source ptp0 [ 1.812300] libphy: fec_enet_mii_bus: probed [ 1.817564] fec 20b4000.ethernet ethFEC0: registered PHC device 0 [ 1.939559] pps pps1: new PPS source ptp1 [ 1.946140] libphy: fec_enet_mii_bus: probed [ 1.954874] fec 2188000.ethernet ethFEC1: registered PHC device 1 [ 1.961970] PPP generic driver version 2.4.2 [ 1.966656] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.973296] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.979059] usbcore: registered new interface driver usb-storage [ 1.985308] usbcore: registered new interface driver usbserial_generic [ 1.991976] usbserial: USB Serial support registered for generic [ 2.041110] rtc rtc0: invalid alarm value: 2026-10-07T33:09:00 [ 2.047366] rtc-pcf8563 4-0051: registered as rtc0 [ 2.064221] rtc-pcf8563 4-0051: setting system clock to 2026-10-07T19:33:19 UTC (1791401599) [ 2.082494] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc1 [ 2.089036] i2c /dev entries driver [ 2.095720] lm75 4-0048: supply vs not found, using dummy regulator [ 2.107368] lm75 4-0048: hwmon0: sensor 'lm75b' [ 2.227768] sdhci: Secure Digital Host Controller Interface driver [ 2.234052] sdhci: Copyright(c) Pierre Ossman [ 2.238424] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.252364] ledtrig-cpu: registered to indicate activity on CPUs [ 2.260196] usbcore: registered new interface driver usbhid [ 2.265796] usbhid: USB HID core driver [ 2.280957] Initializing XFRM netlink socket [ 2.285367] mmc0: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 2.293657] NET: Registered protocol family 10 [ 2.301473] Segment Routing with IPv6 [ 2.305604] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.313621] NET: Registered protocol family 17 [ 2.318717] Key type dns_resolver registered [ 2.327050] registered taskstats version 1 [ 2.331818] Loading compiled-in X.509 certificates [ 2.354492] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 2.366424] of_cfs_init [ 2.369228] of_cfs_init: OK [ 2.377077] ALSA device list: [ 2.380118] No soundcards found. [ 2.383844] Waiting for root device /dev/mmcblk0p3... [ 2.393524] mmc0: new DDR MMC card at address 0001 [ 2.399299] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 2.404226] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 2.410661] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 2.416906] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB, chardev (245:0) [ 2.427743] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.456243] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem [ 2.463646] EXT4-fs (mmcblk0p3): write access will be enabled during recovery [ 3.571672] EXT4-fs (mmcblk0p3): recovery complete [ 3.581987] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 3.590276] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 3.598357] devtmpfs: mounted [ 3.608273] Freeing unused kernel memory: 1024K [ 3.613752] Run /sbin/init as init process [ 4.039577] systemd[1]: systemd 247.3-7+deb11u7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.064023] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.110657] systemd[1]: Set hostname to . [ 5.778957] systemd[1]: Queued start job for default target Graphical Interface. [ 5.794424] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.833468] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.871843] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.916389] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.962414] systemd[1]: Created slice system-wb\x2dcloud\x2dagent.slice. [ OK ] Created slice system-wb\x2dcloud\x2dagent.slice. [ 6.005427] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 6.040154] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 6.080083] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 6.120207] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 6.133298] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 6.170402] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 6.200560] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 6.239508] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 6.272334] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 6.311092] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 6.386292] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.395934] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.430577] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.471812] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.510544] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.553829] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.571507] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.620215] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.675617] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.720005] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 6.741082] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 6.800868] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.849705] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.884740] fuse: init (API version 7.32) [ 6.890466] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.921977] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.961404] systemd[1]: Starting Journal Service... Starting Journal Service... [ 7.040872] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 7.107789] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 7.223598] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 7.268279] systemd[1]: Mounted /sys/kernel/config. [ OK ] Mounted /sys/kernel/config. [ 7.331220] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 7.351556] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. [ 7.453635] systemd[1]: modprobe@drm.service: Succeeded. [ 7.481108] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 7.501779] systemd[1]: modprobe@fuse.service: Succeeded. [ 7.529339] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 7.552270] systemd[1]: Finished File System Check on Root Device. [ OK ] Finished File System Check on Root Device. [ 7.579284] systemd[1]: Finished Load Kernel Modules. [ OK ] Finished Load Kernel Modules. [ 7.644206] systemd[1]: Mounting FUSE Control File System... Mounting FUSE Control File System... [ 7.715503] systemd[1]: Started File System Check Daemon to report status. [ OK ] Started File System Check Daemon to report status. [ 7.812415] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 7.895479] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 7.934380] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted FUSE Control File System. [ 8.034047] EXT4-fs (mmcblk0p3): re-mounted. Opts: discard,errors=remount-ro [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Create System Users. [ OK ] Finished Coldplug All udev Devices. Starting Helper to synchronize boot up for ifupdown... Starting Create Static Device Nodes in /dev... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Rule-based Manage…for Device Events and Files... [ OK ] Started Rule-based Manager for Device Events and Files. [ 10.847893] Driver for 1-wire Dallas network protocol. [ 10.972746] gpio-68 (onewire_w1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 11.079612] gpio-11 (onewire_w2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ OK ] Found device /dev/ttymxc0. [ 11.513577] fec 20b4000.ethernet eth1: renamed from ethFEC0 [ 12.505755] fec 2188000.ethernet eth0: renamed from ethFEC1 [ 12.564072] imx_usb 2184000.usb: No over current polarity defined [ 12.678978] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 12.683949] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 12.849018] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 12.899208] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 12.907499] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.914791] usb usb1: Product: EHCI Host Controller [ 12.919698] usb usb1: Manufacturer: Linux 5.10.35-wb181 ehci_hcd [ 12.925712] usb usb1: SerialNumber: ci_hdrc.0 [ 13.289871] hub 1-0:1.0: USB hub found [ 13.340723] hub 1-0:1.0: 1 port detected [ 13.392758] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 13.443107] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 13.569001] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 13.598152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 13.606541] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.613800] usb usb2: Product: EHCI Host Controller [ 13.618686] usb usb2: Manufacturer: Linux 5.10.35-wb181 ehci_hcd [ 13.624720] usb usb2: SerialNumber: ci_hdrc.1 [ 13.749027] usb usb1-port1: over-current condition [ 13.914688] hub 2-0:1.0: USB hub found [ 13.978984] hub 2-0:1.0: 1 port detected [ 14.398982] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 14.629654] usb 2-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 14.637894] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ OK ] Found device /dev/mmcblk0p5. [ 14.799347] hub 2-1:1.0: USB hub found [ 14.836487] hub 2-1:1.0: 4 ports detected [ 15.208983] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 15.390129] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00 [ 15.398540] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 15.405938] usb 2-1.1: Product: 802.11n WLAN Adapter [ 15.410929] usb 2-1.1: Manufacturer: Realtek [ 15.415207] usb 2-1.1: SerialNumber: 00e04c000001 [ OK ] Found device /dev/mmcblk0p6. [ 15.815979] Bluetooth: Core ver 2.22 [ 15.834040] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 15.859416] NET: Registered protocol family 31 [ 15.863884] Bluetooth: HCI device and connection manager initialized [ 15.898948] Bluetooth: HCI socket layer initialized [ 15.903862] Bluetooth: L2CAP socket layer initialized [ 15.924361] Bluetooth: SCO socket layer initialized [ 15.960924] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 16.024218] usbcore: registered new interface driver btusb [ 16.047263] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 16.055447] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 16.066309] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 16.072435] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 16.082143] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 16.088810] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 16.098080] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... Starting Load/Save RF Kill Switch Status... [ 16.917333] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ 17.415120] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ 17.575608] RTL871X: module init start [ 17.579469] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ OK ] Finished File System Check on /dev/mmcblk0p6. [ 17.851815] RTL871X: rtw_ndev_init(wlan0) Mounting /mnt/data... [ 17.880768] RTL871X: rtw_ndev_init(wlan1) [ 17.894831] usbcore: registered new interface driver rtl8723bu [ 17.900765] RTL871X: module init ret=0 [ 18.025201] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ 18.045892] usbcore: registered new interface driver rtl8xxxu [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... Starting prepare mounts and symlinks to config files... [ 18.872006] systemd-journald[122]: Received client request to flush runtime journal. [ 18.922211] systemd-journald[122]: File /var/log/journal/103549e41f3046b3972ea69bf1b63776/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. Starting KNXnet/IP socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Listening on KNXnet/IP socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Authorization Manager... Starting User Login Management... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... [ 22.151341] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.156680] Bluetooth: BNEP filters: protocol multicast Starting Avahi mDNS/DNS-SD Stack... [ 22.258971] Bluetooth: BNEP socket layer initialized Starting WPA supplicant... [ OK ] Started Authorization Manager. [ OK ] Started Bluetooth service. [ OK ] Reached target Bluetooth. Starting Modem Manager... [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started WPA supplicant. Starting Hostname Service... [ OK ] Started User Login Management. [ OK ] Started Modem Manager. [ OK ] Started Hostname Service. [ OK ] Started Network Manager. Starting Network Manager Wait Online... Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ 28.689111] SMSC LAN8710/LAN8720 2188000.ethernet-2:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet-2:00, irq=POLL) [ 29.031782] Micrel KSZ8081 or KSZ8091 2188000.ethernet-2:03: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet-2:03, irq=POLL) [ 32.329326] fec 20b4000.ethernet eth1: Link is Up - 100Mbps/Full - flow control rx/tx [ 32.337259] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ OK ] Finished Network Manager Wait Online. [ 44.098305] 2018000.serial: ttymxc6 at MMIO 0x2018000 (irq = 224, base_baud = 5000000) is a IMX [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ 46.551333] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 225, base_baud = 5000000) is a IMX [** ] A start job is running for Initiali…ice Tree overlays (43s / 3min 16s) [ 48.965281] 2288000.serial: ttymxc7 at MMIO 0x2288000 (irq = 226, base_baud = 5000000) is a IMX [ 49.446681] mcp230xx 1-0027: error -ENXIO: can't write IOCON 39 [ 50.135280] mcp230xx 1-0021: error -ENXIO: can't write IOCON 33 [ 50.643076] mcp230xx 1-0022: error -ENXIO: can't write IOCON 34 [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Starting Backend service for Wiren Board web interface... Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... Starting MQTT Driver for serial devices... [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started zigbee2mqtt. [ OK ] Started KNX Daemon. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [ OK ] Started Backend service for Wiren Board web interface. [ OK ] Started MQTT Driver for serial devices. [ OK ] Reached target Network is Online. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Getty on tty1. Starting LSB: Brings up/down network automatically... Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttymxc0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Started OpenBSD Secure Shell server. [ 57.751736] process '/usr/sbin/netplugd' started with executable stack [ OK ] Finished Compensation of s…ice-tree (with opposite sign). Debian GNU/Linux 11 wirenboard-ADJZWNQD ttymxc0