HTLLCmxs_mem_init(): before_init_clock mxs_mem_init(): after_init_clock mxs_mem_init(): after_vdda_clock LLC U-Boot 2015.07-00056-gfe0a503 (Jan 12 2017 - 22:48:08 +0300) CPU: Freescale i.MX28 rev1.2 at 454 MHz BOOT: SSP SD/MMC #0, 3V3 DRAM: 128 MiB MMC: MXS MMC: 0 MMC0: Command 8 timeout (status 0xf03c4020) MMC0: Command 55 timeout (status 0xf02c4020) In: serial Out: serial Err: serial Net: FEC0 [PRIME], FEC1 Hit any key to stop autoboot: 0 MMC0: Command 8 timeout (status 0xf0384020) MMC0: Command 55 timeout (status 0xf0284020) switch to partitions #0, OK mmc0(part 0) is current device MMC0: Command 8 timeout (status 0xf0384020) MMC0: Command 55 timeout (status 0xf0284020) SD/MMC found on device 0 43 bytes read in 125 ms (0 Bytes/s) Importing environment from mmc (uEnv.txt)... Checking if uenvcmd is set ... Running default loadzimage ... 3833432 bytes read in 1327 ms (2.8 MiB/s) 38957 bytes read in 583 ms (64.5 KiB/s) Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x3a7e58 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 47b52000, end 47b5e82c ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.22-wb2 (root@wbdevenv) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #2 Sat Jan 26 11:30:10 UTC 2019 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt:Machine model: Wiren Board rev. 5.5 (i.MX28) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyAMA0,115200 ro rootwait fixrtc root=/dev/mmcblk0p3 rootfstype=ext4 video= [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 122704K/131072K available (4569K kernel code, 204K rwdata, 1664K rodata, 160K init, 286K bss, 8368K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc047e9b0 (4571 kB) [ 0.000000] .init : 0xc0642000 - 0xc066a000 ( 160 kB) [ 0.000000] .data : 0xc066a000 - 0xc069d2c0 ( 205 kB) [ 0.000000] .bss : 0xc069d2c0 - 0xc06e4e70 ( 287 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: mxs_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000021] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000682] Console: colour dummy device 80x30 [ 0.000747] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496) [ 0.080303] pid_max: default: 32768 minimum: 301 [ 0.080571] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.080616] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.082195] CPU: Testing write buffer coherency: ok [ 0.083004] Setting up static identity map for 0x40008400 - 0x40008458 [ 0.086691] devtmpfs: initialized [ 0.116140] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.116208] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.116567] pinctrl core: initialized pinctrl subsystem [ 0.119227] NET: Registered protocol family 16 [ 0.120722] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.190520] Serial: AMBA PL011 UART driver [ 0.191455] 80074000.serial: ttyAMA0 at MMIO 0x80074000 (irq = 234, base_baud = 0) is a PL011 rev2 [ 0.454414] console [ttyAMA0] enabled [ 0.481733] mxs-dma 80004000.dma-apbh: initialized [ 0.491977] mxs-dma 80024000.dma-apbx: initialized [ 0.501371] usbcore: registered new interface driver usbfs [ 0.507209] usbcore: registered new interface driver hub [ 0.512790] usbcore: registered new device driver usb [ 0.520081] Linux video capture interface: v2.00 [ 0.524928] pps_core: LinuxPPS API ver. 1 registered [ 0.530017] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.539255] PTP clock support registered [ 0.544110] Advanced Linux Sound Architecture Driver Initialized. [ 0.552478] clocksource: Switched to clocksource mxs_timer [ 0.594851] NET: Registered protocol family 2 [ 0.600776] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.607927] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.614404] TCP: Hash tables configured (established 1024 bind 1024) [ 0.620959] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.626939] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.633663] NET: Registered protocol family 1 [ 0.638999] RPC: Registered named UNIX socket transport module. [ 0.645067] RPC: Registered udp transport module. [ 0.649794] RPC: Registered tcp transport module. [ 0.654582] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.661547] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.671120] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 0.724215] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.731652] io scheduler noop registered (default) [ 0.740528] 8006a000.serial: ttyAPP0 at MMIO 0x8006a000 (irq = 229, base_baud = 1500000) is a 8006a000.serial [ 0.751530] mxs-auart 8006a000.serial: Found APPUART 3.1.0 [ 0.757838] 8006c000.serial: ttyAPP1 at MMIO 0x8006c000 (irq = 230, base_baud = 1500000) is a 8006c000.serial [ 0.768856] mxs-auart 8006c000.serial: Found APPUART 3.1.0 [ 0.775274] 8006e000.serial: ttyAPP2 at MMIO 0x8006e000 (irq = 231, base_baud = 1500000) is a 8006e000.serial [ 0.786329] mxs-auart 8006e000.serial: Found APPUART 3.1.0 [ 0.792690] 80070000.serial: ttyAPP3 at MMIO 0x80070000 (irq = 232, base_baud = 1500000) is a 80070000.serial [ 0.803667] mxs-auart 80070000.serial: Found APPUART 3.1.0 [ 0.809883] 80072000.serial: ttyAPP4 at MMIO 0x80072000 (irq = 233, base_baud = 1500000) is a 80072000.serial [ 0.820896] mxs-auart 80072000.serial: Found APPUART 3.1.0 [ 0.847296] loop: module loaded [ 0.853200] libphy: Fixed MDIO Bus: probed [ 0.972657] 800f0000.ethernet supply phy not found, using dummy regulator [ 1.093883] libphy: fec_enet_mii_bus: probed [ 1.101826] PPP generic driver version 2.4.2 [ 1.106887] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.113932] usbcore: registered new interface driver usbserial [ 1.119977] usbcore: registered new interface driver usbserial_generic [ 1.126791] usbserial: USB Serial support registered for generic [ 1.133601] mousedev: PS/2 mouse device common for all mice [ 1.143597] stmp3xxx-rtc 80056000.rtc: rtc core: registered 80056000.rtc as rtc0 [ 1.151667] i2c /dev entries driver [ 1.157316] stmp3xxx_rtc_wdt stmp3xxx_rtc_wdt: initialized watchdog with heartbeat 19s [ 1.167792] 80010000.ssp supply vmmc not found, using dummy regulator [ 1.232599] mxs-mmc 80010000.ssp: initialized [ 1.239089] ledtrig-cpu: registered to indicate activity on CPUs [ 1.251121] usbcore: registered new interface driver usbhid [ 1.256846] usbhid: USB HID core driver [ 1.277663] NET: Registered protocol family 10 [ 1.285009] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.293492] NET: Registered protocol family 17 [ 1.298064] Key type dns_resolver registered [ 1.304911] registered taskstats version 1 [ 1.315263] stmp3xxx-rtc 80056000.rtc: setting system clock to 2020-09-24 11:12:13 UTC (1600945933) [ 1.324451] of_cfs_init [ 1.327200] of_cfs_init: OK [ 1.331183] usb0_vbus: disabling [ 1.334697] usb1_vbus: disabling [ 1.338010] ALSA device list: [ 1.340994] No soundcards found. [ 1.344941] uart-pl011 80074000.serial: no DMA platform data [ 1.350938] Waiting for root device /dev/mmcblk0p3... [ 1.885490] mmc0: new high speed MMC card at address 0001 [ 1.892432] mmcblk0: mmc0:0001 SEM08G 7.40 GiB [ 1.897818] mmcblk0boot0: mmc0:0001 SEM08G partition 1 1.00 MiB [ 1.904553] mmcblk0boot1: mmc0:0001 SEM08G partition 2 1.00 MiB [ 1.911190] mmcblk0rpmb: mmc0:0001 SEM08G partition 3 128 KiB [ 1.921904] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 1.967031] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 1.975443] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 1.983385] devtmpfs: mounted [ 1.987174] Freeing unused kernel memory: 160K (c0642000 - c066a000) [ 1.993648] This architecture does not have kernel memory protection. [ 2.064249] random: fast init done [ 2.565617] systemd[1]: Failed to insert module 'autofs4': No such file or directory [ 2.598897] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.665533] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.685539] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 2.724582] systemd[1]: Set hostname to . [ 3.598754] systemd-sysv-generator[78]: Overwriting existing symlink /run/systemd/generator.late/haserver.service with real service. [ 4.418158] systemd[1]: openvpn.service: Cannot add dependency job, ignoring: Unit openvpn.service is masked. [ 4.453871] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.493879] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.534115] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.574115] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 4.614659] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 4.644785] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Paths. [ OK ] Listening on fsck to fsckd communication Socket. Mounting POSIX Message Queue File System... [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Reached target Remote File Systems. Mounting Debug File System... [ OK ] Created slice system-getty.slice. [ OK ] Listening on Journal Socket. Starting File System Check on Root Device... Starting Load Kernel Modules... Starting Create list of required st…ce nodes for the current kernel... Mounting /sys/kernel/config... [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. Starting Journal Service... [ OK ] Reached target Encrypted Volumes. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted /sys/kernel/config. [ OK ] Started Load Kernel Modules. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started File System Check Daemon to report status. Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... [ OK ] Started Apply Kernel Variables.plete) [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Journal Service. [FAILED] Failed to start File System Check on Root Device. See 'systemctl status systemd-fsck-root.service' for details. Starting Remount Root and Kernel File Systems... [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target Login Prompts. [ 6.904170] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 6.914892] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro [ OK ] Reached target Sockets. [ OK ] Started Emergency Shell. [ OK ] Reached target Emergency Mode. [ OK ] Reached target Timers. Starting udev Kernel Device Manager... [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Load/Save Random Seed... Starting Flush Journal to Persistent Storage... [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Raise network interfaces... [ OK ] Started Load/Save Random Seed. [ OK ] Started Raise network interfaces. [ OK ] Started udev Kernel Device Manager. [ 8.244511] systemd-journald[93]: Received request to flush runtime journal from PID 1 [ OK ] Reached target Network. [ OK ] Reached target Network is Online. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started udev Coldplug all Devices. You are in emergency mode. After logging in, type "journalctl -xb" to view system logs, "systemctl reboot" to reboot, "systemctl default" or ^D to try again to boot into default mode. Give root password for maintenance (or press Control-D to continue): [ 13.918837] mxs-dcp 80028000.dcp: Failed to register sha1 hash! [ 13.973245] mxs-dcp: probe of 80028000.dcp failed with error -22 [ 13.995266] CAN device driver interface [ 14.115322] 80034000.can supply xceiver not found, using dummy regulator [ 14.234054] flexcan 80034000.can: device registered (reg_base=c8a24000, irq=209) [ 14.262025] mxs-spdif-dai 80054000.spdif: MXS SPDIF Audio Transmitter [ 14.993426] lirc_dev: IR Remote Control driver registered, major 245 [ 15.020137] Driver for 1-wire Dallas network protocol. [ 15.035128] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 15.058544] lirc_pwm: module is from the staging directory, the quality is unknown, you have been warned. [ 15.068679] lirc_pwm: module is from the staging directory, the quality is unknown, you have been warned. [ 15.092901] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 15.185084] lirc_pwm lirc-rfm69: GPIO receiver on pin 37 [ 15.212859] lirc_pwm lirc-rfm69: lirc_dev: driver lirc-rfm69 registered at minor = 0 [ 15.220650] lirc_pwm lirc-rfm69: probed [ 15.232335] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 15.258296] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 15.265273] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.272624] usb usb1: Product: EHCI Host Controller [ 15.277534] usb usb1: Manufacturer: Linux 4.9.22-wb2 ehci_hcd [ 15.283384] usb usb1: SerialNumber: ci_hdrc.0 [ 15.386514] mxs-spdif sound-spdif: snd-soc-dummy-dai <-> 80054000.spdif mapping ok [ 15.474928] lirc_pwm lirc-cir: PWM transmitter on lirc-cir, max duty 50% [ 15.481837] lirc_pwm lirc-cir: GPIO receiver on pin 79 [ 15.553549] lirc_pwm lirc-cir: lirc_dev: driver lirc-cir registered at minor = 1 [ 15.560993] lirc_pwm lirc-cir: probed [ 15.604773] hub 1-0:1.0: USB hub found [ 15.682755] hub 1-0:1.0: 1 port detected [ 15.712684] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 15.717701] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 15.932697] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 15.972931] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 15.979771] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.987160] usb usb2: Product: EHCI Host Controller [ 15.992074] usb usb2: Manufacturer: Linux 4.9.22-wb2 ehci_hcd [ 15.997937] usb usb2: SerialNumber: ci_hdrc.1 [ 16.254815] hub 2-0:1.0: USB hub found [ 16.274564] hub 2-0:1.0: 1 port detected [ 16.662756] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 16.915121] usb 2-1: New USB device found, idVendor=0bda, idProduct=b720 [ 16.921934] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 16.929284] usb 2-1: Product: 802.11n WLAN Adapter [ 16.934187] usb 2-1: Manufacturer: Realtek [ 16.938313] usb 2-1: SerialNumber: 00e04c000001 [ 17.423108] Adding 262140k swap on /dev/mmcblk0p5. Priority:-1 extents:1 across:262140k SS [ 19.531904] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ 19.561543] Bluetooth: Core ver 2.22 [ 19.582894] NET: Registered protocol family 31 [ 19.587380] Bluetooth: HCI device and connection manager initialized [ 19.656113] Bluetooth: HCI socket layer initialized [ 19.681328] Bluetooth: L2CAP socket layer initialized [ 19.710684] Bluetooth: SCO socket layer initialized [ 19.867310] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 19.876193] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin [ 19.890110] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 19.899433] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin [ 19.906079] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin [ 19.925346] Bluetooth: hci0: rom_version status=0 version=1 [ 19.931305] Bluetooth: cfg_sz 0, total size 22496 [ 19.944549] usbcore: registered new interface driver btusb [ 21.209581] 8723bu: module is from the staging directory, the quality is unknown, you have been warned. [ 21.325155] RTL871X: module init start [ 21.328956] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 [ 21.336082] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ 21.887026] RTL871X: rtw_ndev_init(wlan0) [ 21.908409] RTL871X: rtw_ndev_init(wlan1) [ 21.938484] usbcore: registered new interface driver rtl8723bu [ 21.944488] RTL871X: module init ret=0 [ 25.657072] RTL871X: RTW_ADAPTIVITY_EN_[ 25.660823] AUTO, chplan:0x20, Regulation:3,3 [ 25.665284] RTL871X: RTW_ADAPTIVITY_MODE_[ 25.669208] NORMAL [ 26.462644] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 30.112381] RTL871X: nolinked power save enter [ 31.124573] RTL871X: RTW_ADAPTIVITY_EN_[ 31.128282] AUTO, chplan:0x20, Regulation:3,3 [ 31.132756] RTL871X: RTW_ADAPTIVITY_MODE_[ 31.136610] NORMAL [ 31.781688] RTL871X: nolinked power save leave [ 32.013353] RTL871X: rtw_set_802_11_connect(wlan0) fw_state=0x00000008 [ 32.319225] RTL871X: start auth [ 32.328999] RTL871X: auth success, start assoc [ 32.685657] RTL871X: rtw_cfg80211_indicate_connect(wlan0) BSS not found !! [ 32.692660] RTL871X: assoc success [ 32.696594] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 32.798529] RTL871X: send eapol packet [ 33.803394] RTL871X: send eapol packet [ 34.533952] RTL871X: send eapol packet [ 34.538582] RTL871X: set pairwise key camid:4, addr:50:ff:20:35:4b:2a, kid:0, type:AES [ 34.566376] RTL871X: set group key camid:5, addr:50:ff:20:35:4b:2a, kid:2, type:AES root@wirenboard-A7NBSL6Z:~# systemctl status systemd-fsck-root.service ● systemd-fsck-root.service - File System Check on Root Device Loaded: loaded (/lib/systemd/system/systemd-fsck-root.service; static; vendor preset: enabled) Active: failed (Result: exit-code) since Thu 2020-09-24 14:12:18 MSK; 3min 37s ago Condition: start condition failed at Thu 2020-09-24 14:14:20 MSK; 1min 36s ago └─ ConditionPathIsReadWrite=!/ was not met Docs: man:systemd-fsck-root.service(8) Process: 84 ExecStart=/lib/systemd/systemd-fsck (code=exited, status=1/FAILURE) Main PID: 84 (code=exited, status=1/FAILURE) сен 24 14:12:18 wirenboard-A7NBSL6Z systemd-fsck[84]: fsck failed with error code 4. сен 24 14:12:18 wirenboard-A7NBSL6Z systemd-fsck[84]: rootfs1 contains a file system with errors, check forced. сен 24 14:12:18 wirenboard-A7NBSL6Z systemd-fsck[84]: rootfs1: Inodes that were part of a corrupted orphan linked list found. сен 24 14:12:18 wirenboard-A7NBSL6Z systemd-fsck[84]: rootfs1: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. сен 24 14:12:18 wirenboard-A7NBSL6Z systemd-fsck[84]: (i.e., without -a or -p options) сен 24 14:12:18 wirenboard-A7NBSL6Z systemd-fsck[84]: Running request emergency.target/start/replace сен 24 14:12:18 wirenboard-A7NBSL6Z systemd[1]: systemd-fsck-root.service: Main process exited, code=exited, status=1/FAILURE сен 24 14:12:18 wirenboard-A7NBSL6Z systemd[1]: Failed to start File System Check on Root Device. сен 24 14:12:18 wirenboard-A7NBSL6Z systemd[1]: systemd-fsck-root.service: Unit entered failed state. сен 24 14:12:18 wirenboard-A7NBSL6Z systemd[1]: systemd-fsck-root.service: Failed with result 'exit-code'.