All services (2023-08-08T22:49:51.077Z - 2023-08-08T21:52:15.197Z)

2023-08-08T22:49:51.077Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 32 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:49:51.048Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:49:51.047Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:50.085Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:48.779Z [wb-mqtt-serial] WARNING: [modbus] failed to read 1 input(s) @ 496 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:49:48.757Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:49:48.756Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:47.795Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:46.459Z [wb-mqtt-serial] WARNING: [modbus] failed to read 6 input(s) @ 8962 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:49:46.444Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:49:46.428Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:49:46.427Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:45.235Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:43.936Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 35 of device modbus:111: Serial protocol error: request timed out
2023-08-08T22:49:43.907Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:49:43.907Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:42.945Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:41.688Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:49:41.687Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:40.725Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:39.417Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:49:39.416Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:38.455Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:37.162Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 coil(s) @ 0 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:49:37.138Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:49:37.137Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:36.175Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:34.880Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 input(s) @ 97 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:49:34.857Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:49:34.857Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:33.895Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:32.610Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 holding(s) @ 0 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:49:32.588Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:49:32.587Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:31.639Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 coil(s) @ 0 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:49:31.615Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:30.331Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 32 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:49:30.307Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:49:30.306Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:29.335Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:28.063Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 holding(s) @ 2000 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:49:28.038Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:49:28.037Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:27.075Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:25.759Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 4628 of device modbus:62: Serial protocol error: malformed response: invalid crc
2023-08-08T22:49:25.758Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:49:25.757Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:24.485Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:23.201Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 holding(s) @ 0 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:49:23.189Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 coil(s) @ 0 of device modbus:225: Serial protocol error: request timed out
2023-08-08T22:49:23.168Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:49:23.167Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:22.205Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:20.924Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:49:20.897Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:49:20.896Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:19.935Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:18.679Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 input(s) @ 97 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:49:18.658Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:49:18.657Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:17.695Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:16.409Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 discrete(s) @ 0 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:49:16.387Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:49:16.386Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:15.425Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:14.034Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:49:14.018Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:49:14.018Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:12.975Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:11.667Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:49:11.666Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:10.729Z [wb-mqtt-serial] WARNING: [modbus] failed to read 8 discrete(s) @ 0 of device modbus:196: Serial protocol error: request timed out
2023-08-08T22:49:10.705Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:09.421Z [wb-mqtt-serial] WARNING: [modbus] failed to read 8 discrete(s) @ 0 of device modbus:196: Serial protocol error: request timed out
2023-08-08T22:49:09.398Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:49:09.397Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:08.435Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:07.127Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:49:07.126Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:06.189Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 holding(s) @ 2000 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:49:06.165Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:04.883Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 32 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:49:04.880Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 discrete(s) @ 3 of device modbus:111: Serial protocol error: request timed out
2023-08-08T22:49:04.858Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:49:04.857Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:03.885Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:02.577Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:49:02.576Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:01.605Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:49:00.388Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 8724 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:49:00.358Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:49:00.358Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:59.395Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:58.109Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 4628 of device modbus:62: Serial protocol error: malformed response: invalid crc
2023-08-08T22:48:58.094Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:48:58.077Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:48:58.077Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:57.095Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:55.806Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 8756 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:48:55.802Z [wb-mqtt-serial] WARNING: [modbus] failed to read 8 discrete(s) @ 0 of device modbus:196: Serial protocol error: request timed out
2023-08-08T22:48:55.769Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:48:55.768Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:54.795Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:53.505Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:48:53.487Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:48:53.486Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:52.549Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 coil(s) @ 0 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:48:52.525Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:51.238Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:48:51.237Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:50.195Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:48.893Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:48:48.877Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:48:48.876Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:47.615Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:46.404Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:48:46.397Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:48:46.393Z [wb-mqtt-serial] WARNING: [modbus] failed to read 16 input(s) @ 250 of device modbus:111: Serial protocol error: request timed out
2023-08-08T22:48:46.364Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:48:46.364Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:48:46.361Z [] usb 4-1: USB disconnect, device number 65
2023-08-08T22:48:46.285Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 holding(s) @ 0 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:48:46.275Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:48:46.255Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:48:45.779Z [wb-mqtt-serial] WARNING: [modbus] failed to read 2 discrete(s) @ 4 of device modbus:183: Serial protocol error: request timed out
2023-08-08T22:48:45.769Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 coil(s) @ 0 of device modbus:225: Serial protocol error: request timed out
2023-08-08T22:48:45.748Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:48:45.747Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:45.085Z [] usb 4-1: new full-speed USB device number 65 using ohci-platform
2023-08-08T22:48:44.238Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 32 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:48:44.215Z [] usb 4-1: device descriptor read/64, error -62
2023-08-08T22:48:43.815Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:42.943Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 holding(s) @ 2000 of device modbus:225: Serial protocol error: request timed out
2023-08-08T22:48:42.933Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:48:42.915Z [] usb 4-1: device descriptor read/64, error -62
2023-08-08T22:48:42.068Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:48:42.068Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:41.225Z [] usb 4-1: new full-speed USB device number 64 using ohci-platform
2023-08-08T22:48:40.445Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:39.190Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 holding(s) @ 0 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:48:39.168Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:48:39.167Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:38.205Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:36.919Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 discrete(s) @ 0 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:48:36.897Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:48:36.896Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:35.935Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:34.648Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 holding(s) @ 2000 of device modbus:225: Serial protocol error: request timed out
2023-08-08T22:48:34.645Z [wb-mqtt-serial] WARNING: [modbus] failed to read 8 discrete(s) @ 0 of device modbus:196: Serial protocol error: request timed out
2023-08-08T22:48:34.619Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:48:34.618Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:33.655Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:32.364Z [wb-mqtt-serial] WARNING: [modbus] failed to read 2 discrete(s) @ 4 of device modbus:183: Serial protocol error: request timed out
2023-08-08T22:48:32.337Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:48:32.336Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:31.375Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:30.092Z [wb-mqtt-serial] WARNING: [modbus] failed to read 2 discrete(s) @ 4 of device modbus:183: Serial protocol error: request timed out
2023-08-08T22:48:30.089Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 holding(s) @ 2000 of device modbus:225: Serial protocol error: request timed out
2023-08-08T22:48:30.068Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:48:30.068Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:29.095Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:27.595Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 holding(s) @ 2000 of device modbus:225: Serial protocol error: request timed out
2023-08-08T22:48:27.567Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:48:27.566Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:26.525Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:25.299Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:48:25.278Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:48:25.277Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:24.295Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:23.363Z [init] zigbee2mqtt.service: Consumed 24.631s CPU time.
2023-08-08T22:48:23.362Z [init] zigbee2mqtt.service: Failed with result 'exit-code'.
2023-08-08T22:48:23.360Z [init] zigbee2mqtt.service: Main process exited, code=exited, status=1/FAILURE
2023-08-08T22:48:23.233Z [zigbee2mqtt]     at /mnt/data/root/zigbee2mqtt/node_modules/@serialport/stream/dist/index.js:111:18
2023-08-08T22:48:23.233Z [zigbee2mqtt]     at SerialPort._error (/mnt/data/root/zigbee2mqtt/node_modules/@serialport/stream/dist/index.js:75:22)
2023-08-08T22:48:23.233Z [zigbee2mqtt]     at SerialPort.<anonymous> (/mnt/data/root/zigbee2mqtt/node_modules/zigbee-herdsman/src/adapter/z-stack/znp/znp.ts:146:28)
2023-08-08T22:48:23.233Z [zigbee2mqtt] Zigbee2MQTT:error 2023-08-09 01:48:23: Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyUSB0'
2023-08-08T22:48:23.023Z [zigbee2mqtt] Zigbee2MQTT:error 2023-08-09 01:48:23: Exiting...
2023-08-08T22:48:23.012Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 coil(s) @ 0 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:48:23.005Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 35 of device modbus:111: Serial protocol error: request timed out
2023-08-08T22:48:23.002Z [zigbee2mqtt] Zigbee2MQTT:error 2023-08-09 01:48:22: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start.html for possible solutions
2023-08-08T22:48:22.993Z [zigbee2mqtt] Zigbee2MQTT:error 2023-08-09 01:48:22: Failed to start zigbee
2023-08-08T22:48:22.977Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:48:22.977Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:22.973Z [zigbee2mqtt] Zigbee2MQTT:error 2023-08-09 01:48:22: Error while starting zigbee-herdsman
2023-08-08T22:48:21.715Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:20.609Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:48:20: Starting zigbee-herdsman (0.16.0)
2023-08-08T22:48:20.585Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:48:20: Starting Zigbee2MQTT version 1.32.1 (commit #83205e43)
2023-08-08T22:48:20.428Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:48:20.427Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:20.418Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:48:20: Logging to console and directory: '/mnt/data/root/zigbee2mqtt/data/log/2023-08-09.01-48-20' filename: log.txt
2023-08-08T22:48:19.455Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:18.151Z [wb-mqtt-serial] WARNING: [modbus] failed to read 1 input(s) @ 497 of device modbus:225: Serial protocol error: request timed out
2023-08-08T22:48:18.118Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:48:18.118Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:16.855Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:15.529Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 holding(s) @ 2000 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:48:15.515Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:48:15.505Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:14.465Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:13.159Z [wb-mqtt-serial] WARNING: [modbus] failed to read 1 input(s) @ 464 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:48:13.138Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:48:13.137Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:12.176Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 4660 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:48:12.145Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:10.821Z [wb-mqtt-serial] WARNING: [modbus] failed to read 2 discrete(s) @ 4 of device modbus:183: Serial protocol error: request timed out
2023-08-08T22:48:10.798Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:48:10.798Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:09.755Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:08.197Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:48:08.197Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:07.145Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:06.715Z [zigbee2mqtt] > node index.js
2023-08-08T22:48:06.715Z [zigbee2mqtt] > zigbee2mqtt@1.32.1 start
2023-08-08T22:48:06.285Z [] usb 4-1: new full-speed USB device number 61 using ohci-platform
2023-08-08T22:48:05.361Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:48:05.360Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:48:05.360Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:48:05.358Z [] usb 4-1: USB disconnect, device number 60
2023-08-08T22:48:05.355Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:48:04.345Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:48:04.325Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:48:04.005Z [] usb 4-1: new full-speed USB device number 60 using ohci-platform
2023-08-08T22:48:03.411Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:48:03.411Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:48:03.409Z [] usb 4-1: USB disconnect, device number 59
2023-08-08T22:48:03.403Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:48:03.400Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:48:02.684Z [init] Started zigbee2mqtt.
2023-08-08T22:48:02.674Z [init] zigbee2mqtt.service: Consumed 27.114s CPU time.
2023-08-08T22:48:02.673Z [init] Stopped zigbee2mqtt.
2023-08-08T22:48:02.671Z [init] zigbee2mqtt.service: Scheduled restart job, restart counter is at 3.
2023-08-08T22:48:02.327Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 holding(s) @ 2000 of device modbus:225: Serial protocol error: request timed out
2023-08-08T22:48:02.310Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 input(s) @ 97 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:48:02.305Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:48:02.285Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:48:01.377Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:48:01.376Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:48:01.223Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:48:01.205Z [] usb 4-1: new full-speed USB device number 59 using ohci-platform
2023-08-08T22:47:59.780Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 holding(s) @ 0 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:47:59.755Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:59.441Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 8756 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:47:59.413Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:47:59.413Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:47:59.407Z [] usb 4-1: USB disconnect, device number 58
2023-08-08T22:47:59.406Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:47:59.404Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:47:59.125Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:47:59.105Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:47:58.265Z [] usb 4-1: new full-speed USB device number 58 using ohci-platform
2023-08-08T22:47:57.408Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:47:57.407Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:56.145Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:55.359Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:47:55.357Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:47:55.341Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:47:55.341Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:47:55.339Z [] usb 4-1: USB disconnect, device number 57
2023-08-08T22:47:55.265Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:47:55.245Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:47:54.402Z [wb-mqtt-serial] WARNING: [modbus] failed to read 2 discrete(s) @ 4 of device modbus:183: Serial protocol error: request timed out
2023-08-08T22:47:54.377Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:47:54.376Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:54.165Z [] usb 4-1: new full-speed USB device number 57 using ohci-platform
2023-08-08T22:47:52.693Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 discrete(s) @ 3 of device modbus:111: Serial protocol error: request timed out
2023-08-08T22:47:52.665Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:51.441Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 8724 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:47:51.436Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 32 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:47:51.409Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:47:51.408Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:51.367Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:47:51.353Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:47:51.350Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:47:51.349Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:47:51.337Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:47:51.335Z [] usb 4-1: USB disconnect, device number 56
2023-08-08T22:47:51.230Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 coil(s) @ 0 of device modbus:111: Serial protocol error: request timed out
2023-08-08T22:47:51.205Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:47:51.185Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:47:50.885Z [] usb 4-1: new full-speed USB device number 56 using ohci-platform
2023-08-08T22:47:49.899Z [wb-mqtt-serial] WARNING: [modbus] failed to read 1 input(s) @ 464 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:47:49.875Z [] usb 4-1: device not accepting address 55, error -62
2023-08-08T22:47:49.035Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:48.195Z [] usb 4-1: new full-speed USB device number 55 using ohci-platform
2023-08-08T22:47:47.277Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:47:47.276Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:46.015Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:45.795Z [] usb 4-1: device not accepting address 53, error -62
2023-08-08T22:47:45.145Z [] usb 4-1: new full-speed USB device number 53 using ohci-platform
2023-08-08T22:47:44.268Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:47:44.267Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:43.305Z [] usb 4-1: new full-speed USB device number 52 using ohci-platform
2023-08-08T22:47:42.815Z [] usb 4-1: device not accepting address 51, error -62
2023-08-08T22:47:42.765Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:42.155Z [] usb 4-1: new full-speed USB device number 51 using ohci-platform
2023-08-08T22:47:40.803Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 holding(s) @ 0 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:47:40.777Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:47:40.776Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:40.345Z [] usb 4-1: device descriptor read/all, error -62
2023-08-08T22:47:40.084Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:47:40.065Z [] usb 4-1: new full-speed USB device number 49 using ohci-platform
2023-08-08T22:47:39.075Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:37.839Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 coil(s) @ 0 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:47:37.818Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:47:37.817Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:36.775Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:35.467Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:47:35.466Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:34.285Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:33.050Z [wb-mqtt-serial] WARNING: [modbus] failed to read 8 discrete(s) @ 0 of device modbus:196: Serial protocol error: request timed out
2023-08-08T22:47:33.028Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:47:33.028Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:31.745Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:30.450Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 holding(s) @ 2000 of device modbus:225: Serial protocol error: request timed out
2023-08-08T22:47:30.444Z [wb-mqtt-serial] WARNING: [modbus] failed to read 2 discrete(s) @ 4 of device modbus:183: Serial protocol error: request timed out
2023-08-08T22:47:30.417Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:47:30.416Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:29.135Z [] usb 4-1: device descriptor read/64, error -62
2023-08-08T22:47:28.705Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:28.118Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 32 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:47:28.095Z [] usb 4-1: new full-speed USB device number 48 using ohci-platform
2023-08-08T22:47:27.267Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 35 of device modbus:111: Serial protocol error: request timed out
2023-08-08T22:47:27.262Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 32 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:47:27.238Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:47:27.237Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:26.275Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:24.960Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:47:24.959Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:23.685Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:23.305Z [] usb 4-1: new full-speed USB device number 47 using ohci-platform
2023-08-08T22:47:21.972Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 coil(s) @ 0 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:47:21.950Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:47:21.949Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:21.305Z [] usb 4-1: device not accepting address 45, error -62
2023-08-08T22:47:20.455Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:20.055Z [] usb 4-1: new full-speed USB device number 45 using ohci-platform
2023-08-08T22:47:18.499Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 coil(s) @ 0 of device modbus:111: Serial protocol error: request timed out
2023-08-08T22:47:18.477Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:47:18.476Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:17.295Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:15.833Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 holding(s) @ 0 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:47:15.808Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:47:15.807Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:14.825Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:14.623Z [ifup@eth1] No working leases in persistent database - sleeping.
2023-08-08T22:47:14.619Z [ifup@eth1] No DHCPOFFERS received.
2023-08-08T22:47:13.297Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:47:13.296Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:11.815Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:10.568Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:47:10.567Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:09.619Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 32 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:47:09.595Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:09.215Z [] usb 4-1: new full-speed USB device number 43 using ohci-platform
2023-08-08T22:47:07.646Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 8756 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:47:07.639Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:47:07.617Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:47:07.616Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:06.600Z [wb-mqtt-serial] WARNING: [modbus] failed to read 8 discrete(s) @ 0 of device modbus:196: Serial protocol error: request timed out
2023-08-08T22:47:06.575Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:05.769Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 9
2023-08-08T22:47:04.938Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:47:04.937Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:04.329Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:47:04.326Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:47:04.322Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:47:04.321Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:47:04.319Z [] usb 4-1: USB disconnect, device number 41
2023-08-08T22:47:04.094Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 32 of device modbus:225: Serial protocol error: request timed out
2023-08-08T22:47:04.075Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:47:04.055Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:47:03.195Z [] usb 4-1: new full-speed USB device number 41 using ohci-platform
2023-08-08T22:47:02.785Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:01.257Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:47:01.256Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:47:00.215Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:58.945Z [wb-mqtt-serial] WARNING: [modbus] failed to read 8 discrete(s) @ 0 of device modbus:196: Serial protocol error: request timed out
2023-08-08T22:46:58.913Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:46:58.912Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:46:58.912Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:46:58.909Z [] usb 4-1: USB disconnect, device number 40
2023-08-08T22:46:58.906Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:46:58.305Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:46:58.285Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:46:58.205Z [] usb 4-1: new full-speed USB device number 40 using ohci-platform
2023-08-08T22:46:56.828Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:46:56.827Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:55.627Z [wb-mqtt-serial] WARNING: [modbus] failed to read 8 discrete(s) @ 0 of device modbus:196: Serial protocol error: request timed out
2023-08-08T22:46:55.622Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 holding(s) @ 2000 of device modbus:225: Serial protocol error: request timed out
2023-08-08T22:46:55.597Z [] usb usb4-port1: attempt power cycle
2023-08-08T22:46:55.596Z [] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:55.555Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:54.020Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 4660 of device modbus:62: Serial protocol error: malformed response: invalid crc
2023-08-08T22:46:54.017Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:46:54.017Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:53.947Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 12
2023-08-08T22:46:52.985Z [] usb 4-1: new full-speed USB device number 39 using ohci-platform
2023-08-08T22:46:52.535Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:51.707Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 8756 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:46:51.675Z [] usb 4-1: device not accepting address 38, error -62
2023-08-08T22:46:51.309Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 input(s) @ 4866 of device modbus:62: Serial protocol error: malformed response: invalid crc
2023-08-08T22:46:51.278Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:46:51.277Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:51.005Z [] usb 4-1: new full-speed USB device number 38 using ohci-platform
2023-08-08T22:46:49.635Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:48.349Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 32 of device modbus:225: Serial protocol error: request timed out
2023-08-08T22:46:48.327Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:46:48.326Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:47.365Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:46.305Z [] usb 4-1: new full-speed USB device number 37 using ohci-platform
2023-08-08T22:46:45.818Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:46:45.817Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:44.765Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:43.963Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 10
2023-08-08T22:46:43.471Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 35 of device modbus:111: Serial protocol error: request timed out
2023-08-08T22:46:43.447Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:46:43.446Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:43.318Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:46:43.313Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:46:43.312Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:46:43.312Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:46:43.309Z [] usb 4-1: USB disconnect, device number 36
2023-08-08T22:46:43.065Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:46:43.045Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:46:42.175Z [] usb 4-1: new full-speed USB device number 36 using ohci-platform
2023-08-08T22:46:41.410Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 coil(s) @ 0 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:46:41.385Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:39.838Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:46:39.837Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:39.401Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4': Operation was cancelled
2023-08-08T22:46:39.399Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4'
2023-08-08T22:46:39.344Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 4660 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:46:39.337Z [wb-mqtt-serial] WARNING: [modbus] failed to read 8 discrete(s) @ 0 of device modbus:196: Serial protocol error: request timed out
2023-08-08T22:46:39.310Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:46:39.309Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:46:39.298Z [] usb 4-1: USB disconnect, device number 35
2023-08-08T22:46:39.295Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:46:39.275Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:46:38.985Z [] usb 4-1: new full-speed USB device number 35 using ohci-platform
2023-08-08T22:46:38.242Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 4660 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:46:38.205Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:36.909Z [wb-mqtt-serial] WARNING: [modbus] failed to read 2 discrete(s) @ 4 of device modbus:183: Serial protocol error: request timed out
2023-08-08T22:46:36.902Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 holding(s) @ 2000 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:46:36.877Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:46:36.876Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:35.835Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:34.311Z [wb-mqtt-serial] WARNING: [modbus] failed to read 2 discrete(s) @ 4 of device modbus:183: Serial protocol error: request timed out
2023-08-08T22:46:34.301Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:46:34.300Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:46:34.300Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:46:34.299Z [] usb 4-1: USB disconnect, device number 33
2023-08-08T22:46:34.285Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:46:33.165Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:46:33.145Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:46:32.899Z [wb-mqtt-serial] WARNING: [modbus] failed to read 8 discrete(s) @ 0 of device modbus:196: Serial protocol error: request timed out
2023-08-08T22:46:32.875Z [] usb 4-1: new full-speed USB device number 33 using ohci-platform
2023-08-08T22:46:32.577Z [init] zigbee2mqtt.service: Consumed 27.114s CPU time.
2023-08-08T22:46:32.575Z [init] zigbee2mqtt.service: Failed with result 'exit-code'.
2023-08-08T22:46:32.573Z [init] zigbee2mqtt.service: Main process exited, code=exited, status=1/FAILURE
2023-08-08T22:46:32.472Z [zigbee2mqtt]     at processTimers (node:internal/timers:502:7)
2023-08-08T22:46:32.472Z [zigbee2mqtt]     at listOnTimeout (node:internal/timers:559:17)
2023-08-08T22:46:32.472Z [zigbee2mqtt]     at Timeout._onTimeout (/mnt/data/root/zigbee2mqtt/node_modules/zigbee-herdsman/src/utils/waitress.ts:64:35)
2023-08-08T22:46:32.472Z [zigbee2mqtt] Error: SRSP - ZDO - activeEpReq after 6000ms
2023-08-08T22:46:32.439Z [wb-mqtt-serial] WARNING: [modbus] failed to read 1 input(s) @ 496 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:46:32.418Z [] usb usb1-port1: unable to enumerate USB device
2023-08-08T22:46:32.417Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:31.155Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:29.847Z [] usb usb1-port1: attempt power cycle
2023-08-08T22:46:29.846Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:28.585Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:46:28.289Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 15
2023-08-08T22:46:27.173Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 8756 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:46:27.164Z [wb-mqtt-serial] WARNING: [modbus] failed to read 2 discrete(s) @ 4 of device modbus:183: Serial protocol error: request timed out
2023-08-08T22:46:27.156Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:46:27.155Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:46:27.151Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:46:27.146Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:46:27.142Z [] usb 4-1: failed to send control message: -19
2023-08-08T22:46:27.140Z [] usb 4-1: ch341_read_int_callback - usb_submit_urb failed: -19
2023-08-08T22:46:27.137Z [] usb 4-1: USB disconnect, device number 32
2023-08-08T22:46:25.315Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:46:25.295Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:46:25.036Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 coil(s) @ 0 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:46:25.005Z [] usb 4-1: new full-speed USB device number 32 using ohci-platform
2023-08-08T22:46:24.393Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:46:24.392Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:46:24.390Z [] usb 4-1: USB disconnect, device number 31
2023-08-08T22:46:22.796Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': not supported by any plugin
2023-08-08T22:46:22.397Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:46:22: Starting zigbee-herdsman (0.16.0)
2023-08-08T22:46:22.379Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:46:22: Starting Zigbee2MQTT version 1.32.1 (commit #83205e43)
2023-08-08T22:46:22.251Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:46:22: Logging to console and directory: '/mnt/data/root/zigbee2mqtt/data/log/2023-08-09.01-46-22' filename: log.txt
2023-08-08T22:46:21.923Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7
2023-08-08T22:46:20.205Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:46:20.185Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:46:19.905Z [] usb 4-1: new full-speed USB device number 31 using ohci-platform
2023-08-08T22:46:19.344Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 holding(s) @ 2000 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:46:19.344Z [wb-mqtt-serial] WARNING: [modbus] failed to read 2 discrete(s) @ 4 of device modbus:183: Serial protocol error: request timed out
2023-08-08T22:46:19.321Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:46:19.320Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:46:19.320Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:46:19.317Z [] usb 4-1: USB disconnect, device number 30
2023-08-08T22:46:19.314Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:46:18.875Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:46:18.874Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:46:18.855Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:46:18.585Z [] usb 4-1: new full-speed USB device number 30 using ohci-platform
2023-08-08T22:46:18.020Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:46:18.004Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:46:18.004Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:46:18.000Z [] usb 4-1: USB disconnect, device number 29
2023-08-08T22:46:17.744Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 4
2023-08-08T22:46:13.276Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 4
2023-08-08T22:46:10.990Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': not supported by any plugin
2023-08-08T22:46:08.385Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:46:08.365Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:46:08.095Z [] usb 4-1: new full-speed USB device number 29 using ohci-platform
2023-08-08T22:46:07.540Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 8756 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:46:07.534Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:46:07.509Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:46:07.509Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:46:07.506Z [] usb 4-1: USB disconnect, device number 28
2023-08-08T22:46:06.880Z [zigbee2mqtt] > node index.js
2023-08-08T22:46:06.880Z [zigbee2mqtt] > zigbee2mqtt@1.32.1 start
2023-08-08T22:46:04.324Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': not supported by any plugin
2023-08-08T22:46:02.936Z [init] Started zigbee2mqtt.
2023-08-08T22:46:02.924Z [init] zigbee2mqtt.service: Consumed 27.935s CPU time.
2023-08-08T22:46:02.923Z [init] Stopped zigbee2mqtt.
2023-08-08T22:46:02.921Z [init] zigbee2mqtt.service: Scheduled restart job, restart counter is at 2.
2023-08-08T22:46:01.751Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 32 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:46:01.745Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:46:01.725Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:46:01.443Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:46:01.425Z [] usb 4-1: new full-speed USB device number 28 using ohci-platform
2023-08-08T22:46:00.856Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:46:00.854Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:46:00.853Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:46:00.853Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:46:00.850Z [] usb 4-1: USB disconnect, device number 27
2023-08-08T22:45:58.386Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:45:58.365Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:45:58.355Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:45:58.065Z [] usb 4-1: new full-speed USB device number 27 using ohci-platform
2023-08-08T22:45:57.515Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 32 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:45:57.504Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 32 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:45:57.478Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:45:57.478Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:45:57.475Z [] usb 4-1: USB disconnect, device number 26
2023-08-08T22:45:48.934Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': not supported by any plugin
2023-08-08T22:45:46.355Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:45:46.335Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:45:46.079Z [wb-mqtt-serial] WARNING: [modbus] failed to read 1 holding(s) @ 2003 of device modbus:225: Serial protocol error: request timed out
2023-08-08T22:45:46.055Z [] usb 4-1: new full-speed USB device number 26 using ohci-platform
2023-08-08T22:45:45.516Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 35 of device modbus:111: Serial protocol error: request timed out
2023-08-08T22:45:45.483Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:45:45.483Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:45:45.480Z [] usb 4-1: USB disconnect, device number 25
2023-08-08T22:45:45.480Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:45:45.477Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:45:44.617Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 4660 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:45:44.605Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:45:44.585Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:45:44.315Z [] usb 4-1: new full-speed USB device number 25 using ohci-platform
2023-08-08T22:45:43.771Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:45:43.748Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:45:43.744Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:45:43.740Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:45:43.737Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:45:43.735Z [] usb 4-1: USB disconnect, device number 24
2023-08-08T22:45:43.615Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 4660 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:45:43.585Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:45:43.565Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:45:43.295Z [] usb 4-1: new full-speed USB device number 24 using ohci-platform
2023-08-08T22:45:42.735Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 input(s) @ 97 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:45:42.713Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:45:42.712Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:45:42.709Z [] usb 4-1: USB disconnect, device number 23
2023-08-08T22:45:40.651Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': not supported by any plugin
2023-08-08T22:45:38.075Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:45:38.055Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:45:37.765Z [] usb 4-1: new full-speed USB device number 23 using ohci-platform
2023-08-08T22:45:36.819Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:45:36.805Z [] usb 4-1: device descriptor read/all, error -62
2023-08-08T22:45:36.525Z [] usb 4-1: new full-speed USB device number 22 using ohci-platform
2023-08-08T22:45:36.170Z [wb-rules] INFO: [rule info] Зафиксировано нажатие физического выключателя wb-mrgbw-d-fw3_225//[] Input 2 Counter

2023-08-08T22:45:35.769Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:45:35.761Z [wb-mqtt-serial] WARNING: [modbus] failed to read 1 input(s) @ 496 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:45:35.752Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:45:35.750Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:45:35.744Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:45:35.743Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:45:35.741Z [] usb 4-1: USB disconnect, device number 21
2023-08-08T22:45:35.605Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:45:35.585Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:45:35.305Z [] usb 4-1: new full-speed USB device number 21 using ohci-platform
2023-08-08T22:45:34.715Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:45:34.693Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:45:34.693Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:45:34.690Z [] usb 4-1: USB disconnect, device number 20
2023-08-08T22:45:29.965Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': not supported by any plugin
2023-08-08T22:45:27.375Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:45:27.355Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:45:27.085Z [] usb 4-1: new full-speed USB device number 20 using ohci-platform
2023-08-08T22:45:26.547Z [wb-mqtt-serial] WARNING: [modbus] failed to read 8 discrete(s) @ 0 of device modbus:196: Serial protocol error: request timed out
2023-08-08T22:45:26.518Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:45:26.508Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:45:26.505Z [] usb 4-1: USB disconnect, device number 19
2023-08-08T22:45:20.770Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': not supported by any plugin
2023-08-08T22:45:18.195Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:45:18.175Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:45:17.905Z [] usb 4-1: new full-speed USB device number 19 using ohci-platform
2023-08-08T22:45:17.341Z [wb-mqtt-serial] WARNING: [modbus] failed to read 1 input(s) @ 497 of device modbus:225: Serial protocol error: request timed out
2023-08-08T22:45:17.325Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:45:17.325Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:45:17.322Z [] usb 4-1: USB disconnect, device number 18
2023-08-08T22:45:12.967Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': not supported by any plugin
2023-08-08T22:45:10.395Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:45:10.375Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:45:10.136Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 8724 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:45:10.105Z [] usb 4-1: new full-speed USB device number 18 using ohci-platform
2023-08-08T22:45:09.754Z [wb-rules] INFO: [rule info] wb-mrgbw-d-fw3_225/Channel 3 (G) свет включен
2023-08-08T22:45:09.532Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:45:09.532Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:45:09.529Z [] usb 4-1: USB disconnect, device number 17
2023-08-08T22:45:09.048Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': not supported by any plugin
2023-08-08T22:45:08.958Z [wb-rules] INFO: [rule info] Зафиксировано нажатие физического выключателя wb-mrgbw-d-fw3_225//[] Input 2 Counter

2023-08-08T22:45:06.489Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 coil(s) @ 0 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:45:06.465Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:45:06.445Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:45:06.178Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 coil(s) @ 0 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:45:06.155Z [] usb 4-1: new full-speed USB device number 17 using ohci-platform
2023-08-08T22:45:05.586Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 35 of device modbus:111: Serial protocol error: request timed out
2023-08-08T22:45:05.554Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:45:05.554Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:45:05.551Z [] usb 4-1: USB disconnect, device number 16
2023-08-08T22:45:00.525Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': not supported by any plugin
2023-08-08T22:44:57.925Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:44:57.905Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:44:57.635Z [] usb 4-1: new full-speed USB device number 16 using ohci-platform
2023-08-08T22:44:57.092Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:44:57.088Z [wb-mqtt-serial] WARNING: [modbus] failed to read 16 input(s) @ 250 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:44:57.071Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:44:57.071Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:44:57.068Z [] usb 4-1: USB disconnect, device number 15
2023-08-08T22:44:57.060Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:44:57.058Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:44:56.229Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 8756 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:44:56.200Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 input(s) @ 97 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:44:56.195Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:44:56.175Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:44:55.885Z [] usb 4-1: new full-speed USB device number 15 using ohci-platform
2023-08-08T22:44:55.338Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 32 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:44:55.312Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:44:55.311Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:44:55.309Z [] usb 4-1: USB disconnect, device number 14
2023-08-08T22:44:50.665Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': not supported by any plugin
2023-08-08T22:44:48.085Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:44:48.065Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:44:47.665Z [] usb 4-1: device descriptor read/64, error -62
2023-08-08T22:44:47.145Z [] usb 4-1: new full-speed USB device number 14 using ohci-platform
2023-08-08T22:44:46.614Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 35 of device modbus:111: Serial protocol error: request timed out
2023-08-08T22:44:46.610Z [wb-mqtt-serial] WARNING: [modbus] failed to read 2 discrete(s) @ 4 of device modbus:183: Serial protocol error: request timed out
2023-08-08T22:44:46.583Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:44:46.580Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:44:46.579Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:44:46.579Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:44:46.576Z [] usb 4-1: USB disconnect, device number 13
2023-08-08T22:44:44.182Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:44:44.165Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:44:44.145Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:44:43.898Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 coil(s) @ 0 of device modbus:225: Serial protocol error: request timed out
2023-08-08T22:44:43.875Z [] usb 4-1: new full-speed USB device number 13 using ohci-platform
2023-08-08T22:44:43.295Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:44:43.295Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:44:43.292Z [] usb 4-1: USB disconnect, device number 12
2023-08-08T22:44:43.291Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:44:43.289Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:44:42.965Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:44:42.945Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:44:42.665Z [] usb 4-1: new full-speed USB device number 12 using ohci-platform
2023-08-08T22:44:42.121Z [wb-mqtt-serial] WARNING: [serial client] Reading events failed: Serial protocol error: request timed out
2023-08-08T22:44:42.106Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:44:42.103Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:44:42.103Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:44:42.101Z [] usb 4-1: USB disconnect, device number 11
2023-08-08T22:44:42.098Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:44:41.230Z [wb-mqtt-serial] WARNING: [modbus] failed to read 8 discrete(s) @ 0 of device modbus:196: Serial protocol error: request timed out
2023-08-08T22:44:41.205Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:44:41.185Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:44:40.875Z [] usb 4-1: new full-speed USB device number 11 using ohci-platform
2023-08-08T22:44:40.323Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 holding(s) @ 0 of device modbus:128: Serial protocol error: request timed out
2023-08-08T22:44:40.319Z [wb-mqtt-serial] WARNING: [modbus] failed to read 1 input(s) @ 497 of device modbus:225: Serial protocol error: request timed out
2023-08-08T22:44:40.302Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:44:40.301Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:44:40.299Z [] usb 4-1: USB disconnect, device number 10
2023-08-08T22:44:40.298Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:44:40.294Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:44:38.295Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:44:38.275Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:44:38.195Z [] usb 4-1: new full-speed USB device number 10 using ohci-platform
2023-08-08T22:44:37.575Z [] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
2023-08-08T22:44:37.366Z [] usb usb4-port1: attempt power cycle
2023-08-08T22:44:37.365Z [] usb 4-1: device descriptor read/all, error -62
2023-08-08T22:44:37.127Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 8756 of device modbus:62: Serial protocol error: request timed out
2023-08-08T22:44:37.095Z [] usb 4-1: new full-speed USB device number 9 using ohci-platform
2023-08-08T22:44:36.345Z [] usb 4-1: device descriptor read/all, error -62
2023-08-08T22:44:36.075Z [] usb 4-1: new full-speed USB device number 8 using ohci-platform
2023-08-08T22:44:35.351Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4': Operation was cancelled
2023-08-08T22:44:35.348Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4'
2023-08-08T22:44:35.270Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:44:35.270Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:44:35.267Z [] usb 4-1: USB disconnect, device number 7
2023-08-08T22:44:35.083Z [wb-mqtt-serial] WARNING: [modbus] failed to read 12 input(s) @ 8756 of device modbus:62: Serial protocol error: malformed response: invalid crc
2023-08-08T22:44:35.055Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:44:35.025Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:44:34.745Z [] usb 4-1: new full-speed USB device number 7 using ohci-platform
2023-08-08T22:44:33.989Z [wb-mqtt-serial] WARNING: [modbus] failed to read 8 discrete(s) @ 0 of device modbus:196: Serial protocol error: request timed out
2023-08-08T22:44:33.980Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': Operation was cancelled
2023-08-08T22:44:33.977Z [ModemManager] <info>  [base-manager] port ttyUSB0 released by device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1'
2023-08-08T22:44:33.968Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:44:33.958Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:44:33.955Z [] usb 4-1: USB disconnect, device number 6
2023-08-08T22:44:33.699Z [wb-rules] INFO: [rule info] zigbee2mqtt/AqaraButton1 # undefined
2023-08-08T22:44:33.005Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:44:32.985Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:44:32.705Z [] usb 4-1: new full-speed USB device number 6 using ohci-platform
2023-08-08T22:44:32.670Z [init] zigbee2mqtt.service: Consumed 27.935s CPU time.
2023-08-08T22:44:32.666Z [init] zigbee2mqtt.service: Failed with result 'exit-code'.
2023-08-08T22:44:32.663Z [init] zigbee2mqtt.service: Main process exited, code=exited, status=1/FAILURE
2023-08-08T22:44:32.399Z [mosquitto] 1691534672: Client mqttjs_59105e42 disconnected.

2023-08-08T22:44:32.378Z [zigbee2mqtt] Zigbee2MQTT:error 2023-08-09 01:44:32: Failed to stop Zigbee2MQTT
2023-08-08T22:44:32.259Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:32: Stopping zigbee-herdsman...
2023-08-08T22:44:32.242Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:32: Disconnecting from MQTT server
2023-08-08T22:44:32.234Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:32: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload 'offline'
2023-08-08T22:44:32.210Z [wb-mqtt-serial] WARNING: [modbus] failed to read 8 discrete(s) @ 0 of device modbus:196: Serial protocol error: request timed out
2023-08-08T22:44:32.187Z [zigbee2mqtt] Zigbee2MQTT:error 2023-08-09 01:44:32: Adapter disconnected, stopping
2023-08-08T22:44:32.186Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:44:32.185Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:44:32.161Z [wb-mqtt-serial] WARNING: [modbus] failed to read 2 discrete(s) @ 4 of device modbus:183: Serial protocol error: request timed out
2023-08-08T22:44:32.156Z [] usb 4-1: failed to send control message: -19
2023-08-08T22:44:32.142Z [] usb 4-1: ch341_read_int_callback - usb_submit_urb failed: -19
2023-08-08T22:44:32.138Z [] usb 4-1: USB disconnect, device number 5
2023-08-08T22:44:31.960Z [wb-rules] INFO: [rule info] zigbee2mqtt/AqaraButton2 # undefined
2023-08-08T22:44:31.797Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: Zigbee2MQTT started!
2023-08-08T22:44:31.791Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/0xa4c138ab4aedbf98', payload '{"child_lock":"UNLOCK","current":0,"energy":38.75,"indicator_mode":"off/on","power":0,"power_outage_memory":"restore","state":"ON","voltage":231}'
2023-08-08T22:44:31.784Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/Sensor motion 4', payload '{"battery":100,"device_temperature":29,"illuminance":0,"illuminance_lux":0,"occupancy":false,"power_outage_count":18,"voltage":3025}'
2023-08-08T22:44:31.776Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/Sosed water', payload '{"battery":100,"battery_low":false,"tamper":false,"water_leak":false}'
2023-08-08T22:44:31.767Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/Sensor smoke 1', payload '{"ac_status":false,"battery":100,"battery_defect":false,"battery_low":false,"restore_reports":true,"smoke":false,"supervision_reports":true,"tamper":false,"test":false,"trouble":false}'
2023-08-08T22:44:31.761Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/Sensor temp 6', payload '{"battery":80,"humidity":66.31,"temperature":25.71,"voltage":2900}'
2023-08-08T22:44:31.751Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/Sensor temp 4', payload '{"battery":90,"humidity":54.18,"power_outage_count":5719,"pressure":1001.1,"temperature":25.56,"voltage":2985}'
2023-08-08T22:44:31.744Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/Sirena', payload '{"alarm":false,"battery_low":false,"humidity":45,"humidity_alarm":false,"humidity_max":80,"humidity_min":30,"melody":18,"power_type":"usb","temperature":26.9,"temperature_alarm":false,"temperature_max":35,"temperature_min":10,"volume":"low"}'
2023-08-08T22:44:31.728Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/Sensor door 1', payload '{"battery":100,"contact":true,"device_temperature":33,"power_outage_count":46,"voltage":3015}'
2023-08-08T22:44:31.720Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/AqaraButton1', payload '{"battery":100,"device_temperature":32,"power_outage_count":224,"voltage":3015}'
2023-08-08T22:44:31.714Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/Sensor motion 2', payload '{"battery":100,"device_temperature":31,"illuminance":3,"illuminance_lux":3,"occupancy":false,"power_outage_count":45,"voltage":3035}'
2023-08-08T22:44:31.703Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/Sensor motion 1', payload '{"battery":97,"device_temperature":36,"illuminance":0,"illuminance_lux":0,"occupancy":false,"power_outage_count":25,"voltage":2995}'
2023-08-08T22:44:31.696Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/Sensor temp 5 cyrcle', payload '{"battery":0,"humidity":56.3,"temperature":25.8,"voltage":2100}'
2023-08-08T22:44:31.686Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/Sensor temp 3', payload '{"battery":97,"humidity":55.42,"power_outage_count":6330,"pressure":1001.3,"temperature":25.21,"voltage":2995}'
2023-08-08T22:44:31.673Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/Sensor temp 2', payload '{"battery":83,"humidity":53.2,"power_outage_count":8694,"pressure":1001,"temperature":25.84,"voltage":2975}'
2023-08-08T22:44:31.661Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/Sensor motion 3', payload '{"battery":100,"device_temperature":33,"illuminance":6,"illuminance_lux":6,"occupancy":false,"power_outage_count":19,"voltage":3015}'
2023-08-08T22:44:31.651Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/AqaraButton2', payload '{"battery":100,"device_temperature":32,"power_outage_count":168,"voltage":3035}'
2023-08-08T22:44:31.624Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: MQTT publish: topic 'zigbee2mqtt/bridge/config', payload '{"commit":"83205e43","coordinator":{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"},"log_level":"info","network":{"channel":11,"extendedPanID":"0x00124b0024c28fcd","panID":11282},"permit_join":false,"version":"1.32.1"}'
2023-08-08T22:44:31.582Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:31: Configuring '0xa4c138ab4aedbf98'
2023-08-08T22:44:30.911Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload 'online'
2023-08-08T22:44:30.905Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Connected to MQTT server
2023-08-08T22:44:30.883Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': not supported by any plugin
2023-08-08T22:44:30.878Z [mosquitto] 1691534670: New client connected from 127.0.0.1:58292 as mqttjs_59105e42 (p2, c1, k60).
2023-08-08T22:44:30.874Z [mosquitto] 1691534670: New connection from 127.0.0.1:58292 on port 1883.
2023-08-08T22:44:30.534Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Connecting to MQTT server at mqtt://localhost
2023-08-08T22:44:30.275Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Zigbee: disabling joining new devices.
2023-08-08T22:44:30.268Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: 0xa4c138ab4aedbf98 (0xa4c138ab4aedbf98): TS011F_plug_1 - TuYa Smart plug (with power monitoring) (Router)
2023-08-08T22:44:30.263Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Sensor motion 4 (0x00158d00054bbad8): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice)
2023-08-08T22:44:30.260Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Sosed water (0xa4c1382b4eed2d53): TS0207_water_leak_detector - TuYa Water leak detector (EndDevice)
2023-08-08T22:44:30.257Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Sensor smoke 1 (0x804b50fffe2ee239): HS1SA - HEIMAN Smoke detector (EndDevice)
2023-08-08T22:44:30.255Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Sensor temp 6 (0x00124b00226a0a6d): SNZB-02 - SONOFF Temperature and humidity sensor (EndDevice)
2023-08-08T22:44:30.251Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Sensor temp 4 (0x00158d0001d62c48): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2023-08-08T22:44:30.248Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Sirena (0x842e14fffee56610): NAS-AB02B0 - Neo Temperature & humidity sensor and alarm (EndDevice)
2023-08-08T22:44:30.241Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Sensor door 1 (0x00158d0001e4e0ec): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
2023-08-08T22:44:30.238Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: AqaraButton1 (0x00158d00067c3abc): WXKG11LM - Xiaomi Aqara wireless switch (EndDevice)
2023-08-08T22:44:30.236Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Sensor motion 2 (0x00158d00054be66e): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice)
2023-08-08T22:44:30.233Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Sensor motion 1 (0x00158d00054cc690): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice)
2023-08-08T22:44:30.230Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Sensor temp 5 cyrcle (0x5c0272fffec3dc28): TS0201 - TuYa Temperature & humidity sensor with display (EndDevice)
2023-08-08T22:44:30.224Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Sensor temp 3 (0x00158d00058668f3): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2023-08-08T22:44:30.218Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Sensor temp 2 (0x00158d00019d49e7): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
2023-08-08T22:44:30.214Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Sensor motion 3 (0x00158d00054be607): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice)
2023-08-08T22:44:30.211Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: AqaraButton2 (0x00158d00067bd268): WXKG11LM - Xiaomi Aqara wireless switch (EndDevice)
2023-08-08T22:44:30.198Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Currently 16 devices are joined:
2023-08-08T22:44:30.165Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
2023-08-08T22:44:30.152Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:30: zigbee-herdsman started (resumed)
2023-08-08T22:44:28.295Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:44:28.276Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:44:27.975Z [] usb 4-1: new full-speed USB device number 5 using ohci-platform
2023-08-08T22:44:27.372Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:44:27.358Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:44:27.355Z [] usb 4-1: USB disconnect, device number 4
2023-08-08T22:44:26.636Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:26: Starting zigbee-herdsman (0.16.0)
2023-08-08T22:44:26.622Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:26: Starting Zigbee2MQTT version 1.32.1 (commit #83205e43)
2023-08-08T22:44:26.513Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:44:26: Logging to console and directory: '/mnt/data/root/zigbee2mqtt/data/log/2023-08-09.01-44-26' filename: log.txt
2023-08-08T22:44:26.216Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': not supported by any plugin
2023-08-08T22:44:23.605Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:44:23.585Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:44:23.295Z [] usb 4-1: new full-speed USB device number 4 using ohci-platform
2023-08-08T22:44:22.751Z [wb-mqtt-serial] WARNING: [modbus] failed to read 4 holding(s) @ 2000 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:44:22.726Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:44:22.726Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:44:22.705Z [] usb 4-1: USB disconnect, device number 3
2023-08-08T22:44:11.988Z [zigbee2mqtt] > node index.js
2023-08-08T22:44:11.988Z [zigbee2mqtt] > zigbee2mqtt@1.32.1 start
2023-08-08T22:44:07.433Z [init] Started zigbee2mqtt.
2023-08-08T22:44:07.425Z [init] zigbee2mqtt.service: Consumed 1min 11.213s CPU time.
2023-08-08T22:44:07.424Z [init] Stopped zigbee2mqtt.
2023-08-08T22:44:07.421Z [init] zigbee2mqtt.service: Scheduled restart job, restart counter is at 1.
2023-08-08T22:42:40.339Z [ModemManager] <info>  [base-manager] couldn't check support for device '/sys/devices/platform/soc/1c14400.usb/usb4/4-1': not supported by any plugin
2023-08-08T22:42:37.755Z [] usb 4-1: ch341-uart converter now attached to ttyUSB0
2023-08-08T22:42:37.735Z [] ch341 4-1:1.0: ch341-uart converter detected
2023-08-08T22:42:37.445Z [] usb 4-1: new full-speed USB device number 3 using ohci-platform
2023-08-08T22:42:37.185Z [init] zigbee2mqtt.service: Consumed 1min 11.213s CPU time.
2023-08-08T22:42:37.185Z [init] zigbee2mqtt.service: Failed with result 'exit-code'.
2023-08-08T22:42:37.182Z [init] zigbee2mqtt.service: Main process exited, code=exited, status=1/FAILURE
2023-08-08T22:42:36.964Z [mosquitto] 1691534556: Client mqttjs_10fd570b disconnected.

2023-08-08T22:42:36.953Z [zigbee2mqtt] Zigbee2MQTT:error 2023-08-09 01:42:36: Failed to stop Zigbee2MQTT
2023-08-08T22:42:36.910Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:42:36: Stopping zigbee-herdsman...
2023-08-08T22:42:36.906Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:42:36: Disconnecting from MQTT server
2023-08-08T22:42:36.897Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:42:36: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload 'offline'
2023-08-08T22:42:36.883Z [zigbee2mqtt] Zigbee2MQTT:error 2023-08-09 01:42:36: Adapter disconnected, stopping
2023-08-08T22:42:36.878Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 32 of device modbus:218: Serial protocol error: request timed out
2023-08-08T22:42:36.878Z [] ch341 4-1:1.0: device disconnected
2023-08-08T22:42:36.873Z [] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0
2023-08-08T22:42:36.870Z [] usb 4-1: failed to send control message: -19
2023-08-08T22:42:36.851Z [] usb 4-1: ch341_read_int_callback - usb_submit_urb failed: -19
2023-08-08T22:42:36.848Z [] usb 4-1: USB disconnect, device number 2
2023-08-08T22:42:34.467Z [ifup@eth1] No working leases in persistent database - sleeping.
2023-08-08T22:42:34.463Z [ifup@eth1] No DHCPOFFERS received.
2023-08-08T22:42:28.394Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6
2023-08-08T22:42:07.202Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 21
2023-08-08T22:41:52.510Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 15
2023-08-08T22:41:44.116Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8
2023-08-08T22:41:37.335Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7
2023-08-08T22:41:33.723Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 4
2023-08-08T22:38:42.993Z [ifup@eth1] No working leases in persistent database - sleeping.
2023-08-08T22:38:42.985Z [ifup@eth1] No DHCPOFFERS received.
2023-08-08T22:38:36.891Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6
2023-08-08T22:38:21.024Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 15
2023-08-08T22:38:11.846Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 10
2023-08-08T22:37:59.188Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 12
2023-08-08T22:37:52.609Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7
2023-08-08T22:37:44.672Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8
2023-08-08T22:37:41.304Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 3
2023-08-08T22:35:37.881Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:35:37: MQTT publish: topic 'zigbee2mqtt/Sensor temp 6', payload '{"battery":80,"humidity":66.31,"linkquality":72,"temperature":25.71,"voltage":2900}'
2023-08-08T22:35:37.881Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:35:37: MQTT publish: topic 'zigbee2mqtt/Sensor temp 6', payload '{"battery":80,"humidity":66.31,"linkquality":72,"temperature":25.71,"voltage":2900}'
2023-08-08T22:35:37.851Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:35:37: MQTT publish: topic 'zigbee2mqtt/Sensor temp 6', payload '{"battery":80,"humidity":66.31,"linkquality":72,"temperature":25.71,"voltage":2900}'
2023-08-08T22:30:22.174Z [ifup@eth1] No working leases in persistent database - sleeping.
2023-08-08T22:30:22.168Z [ifup@eth1] No DHCPOFFERS received.
2023-08-08T22:30:07.183Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 15
2023-08-08T22:29:54.612Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13
2023-08-08T22:29:39.755Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 15
2023-08-08T22:29:28.248Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 11
2023-08-08T22:29:21.299Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7
2023-08-08T22:28:51.947Z [wb-rules] INFO: [rule info] термостат выкл, выключаем управление реле
2023-08-08T22:28:51.947Z [wb-rules] INFO: [rule info] термостат выкл, выключаем управление реле
2023-08-08T22:28:51.936Z [wb-rules] INFO: [rule info] Climat_5//temperature = 25.71
2023-08-08T22:28:51.904Z [wb-rules] INFO: [rule info] Sensor temp 6/temperature = 25.71
2023-08-08T22:28:51.794Z [wb-rules] INFO: [rule info] Sensor temp 3/humidity = 55.42

2023-08-08T22:28:51.767Z [wb-rules] INFO: [rule info] термостат выкл, выключаем управление реле
2023-08-08T22:28:51.754Z [wb-rules] INFO: [rule info] Climat_3//temperature = 25.21
2023-08-08T22:28:51.129Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:28:51: MQTT publish: topic 'zigbee2mqtt/Sensor temp 6', payload '{"battery":80,"humidity":66.31,"linkquality":76,"temperature":25.71,"voltage":2900}'
2023-08-08T22:28:51.091Z [wb-rules] INFO: [rule info] Sensor temp 3/temperature = 25.21
2023-08-08T22:28:50.909Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:28:50: MQTT publish: topic 'zigbee2mqtt/Sensor temp 3', payload '{"battery":97,"humidity":55.42,"linkquality":76,"power_outage_count":6330,"pressure":1001.3,"temperature":25.21,"voltage":2995}'
2023-08-08T22:28:50.900Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:28:50: MQTT publish: topic 'zigbee2mqtt/Sensor temp 3', payload '{"battery":97,"humidity":55.42,"linkquality":76,"power_outage_count":6330,"pressure":1001.3,"temperature":25.21,"voltage":2995}'
2023-08-08T22:28:50.900Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:28:50: MQTT publish: topic 'zigbee2mqtt/Sensor temp 3', payload '{"battery":97,"humidity":55.42,"linkquality":76,"power_outage_count":6330,"pressure":1001.3,"temperature":25.21,"voltage":2995}'
2023-08-08T22:28:50.874Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:28:50: MQTT publish: topic 'zigbee2mqtt/Sensor temp 3', payload '{"battery":97,"humidity":55.32,"linkquality":76,"power_outage_count":6330,"pressure":1001.3,"temperature":25.21,"voltage":2995}'
2023-08-08T22:26:34.260Z [ifup@eth1] No working leases in persistent database - sleeping.
2023-08-08T22:26:34.257Z [ifup@eth1] No DHCPOFFERS received.
2023-08-08T22:26:28.246Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6
2023-08-08T22:26:20.579Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8
2023-08-08T22:26:10.652Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 10
2023-08-08T22:25:50.249Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 20
2023-08-08T22:25:38.687Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 12
2023-08-08T22:25:33.449Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
2023-08-08T22:25:33.449Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
2023-08-08T22:25:01.110Z [mosquitto] 1691533501: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
2023-08-08T22:24:58.661Z [wb-rules] INFO: [rule info] Sensor temp 6/humidity = 66.31

2023-08-08T22:24:58.474Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:24:58: MQTT publish: topic 'zigbee2mqtt/Sensor temp 6', payload '{"battery":80,"humidity":66.31,"linkquality":76,"temperature":25.74,"voltage":2900}'
2023-08-08T22:21:29.058Z [ifup@eth1] No working leases in persistent database - sleeping.
2023-08-08T22:21:29.055Z [ifup@eth1] No DHCPOFFERS received.
2023-08-08T22:21:26.785Z [wb-rules] INFO: [rule info] термостат выкл, выключаем управление реле
2023-08-08T22:21:26.770Z [wb-rules] INFO: [rule info] Climat_3//temperature = 25.14
2023-08-08T22:21:26.724Z [wb-rules] INFO: [rule info] Sensor temp 3/temperature = 25.14
2023-08-08T22:21:26.699Z [wb-rules] INFO: [rule info] Sensor temp 3/humidity = 55.32

2023-08-08T22:21:26.699Z [wb-rules] INFO: [rule info] Sensor temp 3/humidity = 55.32

2023-08-08T22:21:26.446Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:21:26: MQTT publish: topic 'zigbee2mqtt/Sensor temp 3', payload '{"battery":97,"humidity":55.32,"linkquality":76,"power_outage_count":6330,"pressure":1001.3,"temperature":25.14,"voltage":2995}'
2023-08-08T22:21:21.290Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8
2023-08-08T22:21:08.179Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13
2023-08-08T22:21:01.496Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7
2023-08-08T22:20:42.704Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 19
2023-08-08T22:20:33.255Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 9
2023-08-08T22:20:28.555Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
2023-08-08T22:17:57.417Z [ifup@eth1] No working leases in persistent database - sleeping.
2023-08-08T22:17:57.411Z [ifup@eth1] No DHCPOFFERS received.
2023-08-08T22:17:57.411Z [ifup@eth1] No DHCPOFFERS received.
2023-08-08T22:17:51.403Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6
2023-08-08T22:17:36.419Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 15
2023-08-08T22:17:24.362Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 12
2023-08-08T22:17:12.625Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 12
2023-08-08T22:17:06.764Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6
2023-08-08T22:17:01.917Z [cron] pam_unix(cron:session): session closed for user root
2023-08-08T22:17:01.885Z [cron] (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
2023-08-08T22:17:01.866Z [cron] pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
2023-08-08T22:17:00.445Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6
2023-08-08T22:17:00.445Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6
2023-08-08T22:16:56.167Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 4
2023-08-08T22:16:47.154Z [wb-rules] INFO: [rule info] zigbee2mqtt/AqaraButton1 # undefined
2023-08-08T22:16:46.977Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:16:46: MQTT publish: topic 'zigbee2mqtt/AqaraButton1', payload '{"battery":100,"device_temperature":32,"linkquality":145,"power_outage_count":224,"voltage":3015}'
2023-08-08T22:16:05.686Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:16:05: MQTT publish: topic 'zigbee2mqtt/Sensor motion 2', payload '{"battery":100,"device_temperature":31,"illuminance":3,"illuminance_lux":3,"linkquality":204,"occupancy":false,"power_outage_count":45,"voltage":3035}'
2023-08-08T22:14:15.316Z [ifup@eth1] No working leases in persistent database - sleeping.
2023-08-08T22:14:15.312Z [ifup@eth1] No DHCPOFFERS received.
2023-08-08T22:14:07.866Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8
2023-08-08T22:13:56.700Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 11
2023-08-08T22:13:46.255Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 10
2023-08-08T22:13:46.255Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 10
2023-08-08T22:13:37.994Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 9
2023-08-08T22:13:29.814Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8
2023-08-08T22:13:18.815Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 11
2023-08-08T22:13:14.074Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 4
2023-08-08T22:12:46.635Z [wb-rules] INFO: [rule info] термостат выкл, выключаем управление реле
2023-08-08T22:12:46.625Z [wb-rules] INFO: [rule info] Climat_2//temperature = 25.84
2023-08-08T22:12:46.575Z [wb-rules] INFO: [rule info] Sensor temp 2/temperature = 25.84
2023-08-08T22:12:46.560Z [wb-rules] INFO: [rule info] Sensor temp 2/humidity = 53.2
2023-08-08T22:12:46.327Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:12:46: MQTT publish: topic 'zigbee2mqtt/Sensor temp 2', payload '{"battery":83,"humidity":53.2,"linkquality":80,"power_outage_count":8694,"pressure":1001,"temperature":25.84,"voltage":2975}'
2023-08-08T22:12:46.327Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:12:46: MQTT publish: topic 'zigbee2mqtt/Sensor temp 2', payload '{"battery":83,"humidity":53.2,"linkquality":80,"power_outage_count":8694,"pressure":1001,"temperature":25.84,"voltage":2975}'
2023-08-08T22:11:02.980Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:11:02: MQTT publish: topic 'zigbee2mqtt/Sensor motion 4', payload '{"battery":100,"device_temperature":29,"illuminance":0,"illuminance_lux":0,"linkquality":116,"occupancy":false,"power_outage_count":18,"voltage":3025}'
2023-08-08T22:09:24.641Z [wb-rules] INFO: [rule info] Sensor temp 2/humidity = 53.12

2023-08-08T22:09:24.633Z [wb-rules] INFO: [rule info] термостат выкл, выключаем управление реле
2023-08-08T22:09:24.623Z [wb-rules] INFO: [rule info] Climat_2//temperature = 25.78
2023-08-08T22:09:24.623Z [wb-rules] INFO: [rule info] Climat_2//temperature = 25.78
2023-08-08T22:09:24.108Z [wb-rules] INFO: [rule info] Sensor temp 2/temperature = 25.78
2023-08-08T22:09:23.960Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:09:23: MQTT publish: topic 'zigbee2mqtt/Sensor temp 2', payload '{"battery":83,"humidity":53.12,"linkquality":80,"power_outage_count":8694,"pressure":1001,"temperature":25.78,"voltage":2975}'
2023-08-08T22:09:23.954Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:09:23: MQTT publish: topic 'zigbee2mqtt/Sensor temp 2', payload '{"battery":83,"humidity":53.12,"linkquality":80,"power_outage_count":8694,"pressure":1000.7,"temperature":25.78,"voltage":2975}'
2023-08-08T22:09:23.901Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:09:23: MQTT publish: topic 'zigbee2mqtt/Sensor temp 2', payload '{"battery":83,"humidity":52.03,"linkquality":72,"power_outage_count":8694,"pressure":1000.7,"temperature":25.78,"voltage":2975}'
2023-08-08T22:06:12.553Z [ifup@eth1] No working leases in persistent database - sleeping.
2023-08-08T22:06:12.550Z [ifup@eth1] No DHCPOFFERS received.
2023-08-08T22:05:59.851Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13
2023-08-08T22:05:59.784Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:05:59: MQTT publish: topic 'zigbee2mqtt/Sensor smoke 1', payload '{"ac_status":false,"battery":100,"battery_defect":false,"battery_low":false,"linkquality":87,"restore_reports":true,"smoke":false,"supervision_reports":true,"tamper":false,"test":false,"trouble":false}'
2023-08-08T22:05:53.768Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:05:53: MQTT publish: topic 'zigbee2mqtt/Sensor smoke 1', payload '{"ac_status":false,"battery":100,"battery_defect":false,"battery_low":false,"linkquality":87,"restore_reports":true,"smoke":false,"supervision_reports":true,"tamper":false,"test":false,"trouble":false}'
2023-08-08T22:05:53.768Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:05:53: MQTT publish: topic 'zigbee2mqtt/Sensor smoke 1', payload '{"ac_status":false,"battery":100,"battery_defect":false,"battery_low":false,"linkquality":87,"restore_reports":true,"smoke":false,"supervision_reports":true,"tamper":false,"test":false,"trouble":false}'
2023-08-08T22:05:39.277Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 20
2023-08-08T22:05:28.375Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 11
2023-08-08T22:05:19.446Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 9
2023-08-08T22:05:11.167Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8
2023-08-08T22:01:09.389Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:01:09: MQTT publish: topic 'zigbee2mqtt/Sensor motion 3', payload '{"battery":100,"device_temperature":33,"illuminance":6,"illuminance_lux":6,"linkquality":105,"occupancy":false,"power_outage_count":19,"voltage":3015}'
2023-08-08T22:00:02.951Z [wb-rules] INFO: [rule info] термостат выкл, выключаем управление реле
2023-08-08T22:00:02.937Z [wb-rules] INFO: [rule info] Climat_4//temperature = 25.56
2023-08-08T22:00:02.870Z [wb-rules] INFO: [rule info] Sensor temp 4/humidity = 54.18

2023-08-08T22:00:02.830Z [wb-rules] INFO: [rule info] Sensor temp 4/temperature = 25.56
2023-08-08T22:00:02.830Z [wb-rules] INFO: [rule info] Sensor temp 4/temperature = 25.56
2023-08-08T22:00:02.234Z [wb-mqtt-db] WARNING: [dblogger] Group data limit is reached: group all, row count 102001, limit 100000
2023-08-08T22:00:02.074Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:00:02: MQTT publish: topic 'zigbee2mqtt/Sensor temp 4', payload '{"battery":90,"humidity":54.18,"linkquality":102,"power_outage_count":5719,"pressure":1001.1,"temperature":25.56,"voltage":2985}'
2023-08-08T22:00:02.052Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:00:02: MQTT publish: topic 'zigbee2mqtt/Sensor temp 4', payload '{"battery":90,"humidity":54.18,"linkquality":105,"power_outage_count":5719,"pressure":1001,"temperature":25.56,"voltage":2985}'
2023-08-08T22:00:02.040Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 01:00:02: MQTT publish: topic 'zigbee2mqtt/Sensor temp 4', payload '{"battery":90,"humidity":54.31,"linkquality":105,"power_outage_count":5719,"pressure":1001,"temperature":25.56,"voltage":2985}'
2023-08-08T21:58:50.955Z [wb-rules] INFO: [rule info] термостат выкл, выключаем управление реле
2023-08-08T21:58:50.939Z [wb-rules] INFO: [rule info] Climat_5//temperature = 25.74
2023-08-08T21:58:50.901Z [wb-rules] INFO: [rule info] Sensor temp 6/temperature = 25.74
2023-08-08T21:58:50.725Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 00:58:50: MQTT publish: topic 'zigbee2mqtt/Sensor temp 6', payload '{"battery":80,"humidity":67.1,"linkquality":76,"temperature":25.74,"voltage":2900}'
2023-08-08T21:58:38.061Z [ifup@eth1] No working leases in persistent database - sleeping.
2023-08-08T21:58:38.061Z [ifup@eth1] No working leases in persistent database - sleeping.
2023-08-08T21:58:38.057Z [ifup@eth1] No DHCPOFFERS received.
2023-08-08T21:58:28.445Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 10
2023-08-08T21:58:19.393Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 9
2023-08-08T21:58:12.823Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7
2023-08-08T21:57:58.225Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 14
2023-08-08T21:57:49.991Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 9
2023-08-08T21:57:44.684Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
2023-08-08T21:57:40.534Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 4
2023-08-08T21:57:37.177Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 3
2023-08-08T21:57:37.177Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 3
2023-08-08T21:55:43.481Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 00:55:43: MQTT publish: topic 'zigbee2mqtt/Sensor door 1', payload '{"battery":100,"contact":true,"device_temperature":33,"linkquality":138,"power_outage_count":46,"voltage":3015}'
2023-08-08T21:55:11.684Z [wb-rules] INFO: [rule info] zigbee2mqtt/AqaraButton2 # undefined
2023-08-08T21:55:11.513Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 00:55:11: MQTT publish: topic 'zigbee2mqtt/AqaraButton2', payload '{"battery":100,"device_temperature":32,"linkquality":109,"power_outage_count":168,"voltage":3035}'
2023-08-08T21:55:00.112Z [mosquitto] 1691531700: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
2023-08-08T21:52:49.906Z [ifup@eth1] No working leases in persistent database - sleeping.
2023-08-08T21:52:49.903Z [ifup@eth1] No DHCPOFFERS received.
2023-08-08T21:52:42.328Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7
2023-08-08T21:52:32.257Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 10
2023-08-08T21:52:15.197Z [zigbee2mqtt] Zigbee2MQTT:info  2023-08-09 00:52:15: MQTT publish: topic 'zigbee2mqtt/Sensor motion 1', payload '{"battery":97,"device_temperature":36,"illuminance":0,"illuminance_lux":0,"linkquality":43,"occupancy":false,"power_outage_count":25,"voltage":2995}'