All services (2022-10-30T18:52:51.288Z - 2022-10-30T18:49:08.224Z) 2022-10-30T18:52:51.288Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:52:51.286Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:52:51.283Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:52:51.281Z [init] Started KNX Daemon. 2022-10-30T18:52:51.279Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:52:51.277Z [knxd] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:52:51.242Z [init] Starting KNX Daemon... 2022-10-30T18:52:51.238Z [init] Stopped KNX Daemon. 2022-10-30T18:52:51.235Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:52:41.037Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:52:41.036Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:52:41.033Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:52:41.030Z [init] Started KNX Daemon. 2022-10-30T18:52:41.029Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:52:41.027Z [] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:52:40.992Z [init] Starting KNX Daemon... 2022-10-30T18:52:40.988Z [init] Stopped KNX Daemon. 2022-10-30T18:52:40.985Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:52:30.793Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:52:30.791Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:52:30.789Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:52:30.783Z [init] Started KNX Daemon. 2022-10-30T18:52:30.782Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:52:30.781Z [knxd] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:52:30.742Z [init] Starting KNX Daemon... 2022-10-30T18:52:30.738Z [init] Stopped KNX Daemon. 2022-10-30T18:52:30.735Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:52:20.542Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:52:20.542Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:52:20.540Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:52:20.537Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:52:20.531Z [init] Started KNX Daemon. 2022-10-30T18:52:20.530Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:52:20.527Z [knxd] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:52:20.492Z [init] Starting KNX Daemon... 2022-10-30T18:52:20.488Z [init] Stopped KNX Daemon. 2022-10-30T18:52:20.485Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:52:18.028Z [ntp] error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:52:18.028Z [ntp] error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:52:17.678Z [wb-rules] INFO: network/GPRS IP: failed to convert value '', passing raw 2022-10-30T18:52:17.672Z [wb-rules] Device "ppp0" does not exist. 2022-10-30T18:52:17.668Z [wb-rules] INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw 2022-10-30T18:52:17.645Z [wb-rules] INFO: network/Ethernet 2 IP: failed to convert value '', passing raw 2022-10-30T18:52:16.028Z [ntp] error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:52:14.030Z [ntp] error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:52:14.029Z [ntp] error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:52:10.290Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:52:10.288Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:52:10.288Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:52:10.286Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:52:10.281Z [init] Started KNX Daemon. 2022-10-30T18:52:10.280Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:52:10.278Z [knxd] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:52:10.242Z [init] Starting KNX Daemon... 2022-10-30T18:52:10.238Z [init] Stopped KNX Daemon. 2022-10-30T18:52:10.235Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:52:09.576Z [ssh] Server listening on :: port 22. 2022-10-30T18:52:09.573Z [ssh] Server listening on 0.0.0.0 port 22. 2022-10-30T18:52:09.573Z [ssh] Server listening on 0.0.0.0 port 22. 2022-10-30T18:52:09.543Z [ssh] /etc/ssh/sshd_config line 37: Deprecated option RhostsRSAAuthentication 2022-10-30T18:52:09.543Z [ssh] /etc/ssh/sshd_config line 30: Deprecated option RSAAuthentication 2022-10-30T18:52:09.543Z [ssh] /etc/ssh/sshd_config line 19: Deprecated option ServerKeyBits 2022-10-30T18:52:09.543Z [ssh] /etc/ssh/sshd_config line 18: Deprecated option KeyRegenerationInterval 2022-10-30T18:52:09.525Z [ifup@eth1] eth1=eth1 2022-10-30T18:52:09.518Z [init] Reloaded OpenBSD Secure Shell server. 2022-10-30T18:52:09.515Z [ssh] Received SIGHUP; restarting. 2022-10-30T18:52:09.515Z [ssh] Received SIGHUP; restarting. 2022-10-30T18:52:09.454Z [ssh] /etc/ssh/sshd_config line 37: Deprecated option RhostsRSAAuthentication 2022-10-30T18:52:09.454Z [ssh] /etc/ssh/sshd_config line 30: Deprecated option RSAAuthentication 2022-10-30T18:52:09.454Z [ssh] /etc/ssh/sshd_config line 19: Deprecated option ServerKeyBits 2022-10-30T18:52:09.454Z [ssh] /etc/ssh/sshd_config line 18: Deprecated option KeyRegenerationInterval 2022-10-30T18:52:09.426Z [init] Reloading OpenBSD Secure Shell server. 2022-10-30T18:52:09.375Z [] no servers can be used, exiting 2022-10-30T18:52:09.374Z [] Can't find host 3.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:52:09.373Z [] Can't find host 2.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:52:09.372Z [ifup@eth1] Can't find host 1.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:52:09.372Z [ifup@eth1] Can't find host 1.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:52:09.370Z [ifup@eth1] Can't find host 0.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:52:09.323Z [ifup@eth1] pam_unix(sudo:session): session closed for user avahi 2022-10-30T18:52:09.318Z [] Cannot open mail:25 2022-10-30T18:52:09.316Z [] Unable to locate mail 2022-10-30T18:52:09.310Z [ifup@eth1] pam_unix(sudo:session): session opened for user avahi by (uid=0) 2022-10-30T18:52:09.308Z [] Cannot open mail:25 2022-10-30T18:52:09.306Z [] Unable to locate mail 2022-10-30T18:52:09.298Z [ifup@eth1] root : TTY=unknown ; PWD=/ ; USER=avahi ; GROUP=avahi ; COMMAND=/usr/lib/avahi/avahi-daemon-check-dns.sh 2022-10-30T18:52:09.289Z [ifup@eth1] root : problem with defaults entries ; TTY=unknown ; PWD=/ ; USER=avahi ; GROUP=avahi ; 2022-10-30T18:52:09.289Z [ifup@eth1] root : problem with defaults entries ; TTY=unknown ; PWD=/ ; USER=avahi ; GROUP=avahi ; 2022-10-30T18:52:09.287Z [ifup@eth1] sudo: unable to resolve host wirenboard-AUCNYTO: No such file or directory 2022-10-30T18:52:09.284Z [ifup@eth1] root : unable to resolve host wirenboard-AUCNYTO 2022-10-30T18:52:09.229Z [ifup@eth1] No working leases in persistent database - sleeping. 2022-10-30T18:52:09.227Z [ifup@eth1] No working leases in persistent database - sleeping. 2022-10-30T18:52:09.227Z [ifup@eth1] No DHCPOFFERS received. 2022-10-30T18:52:09.224Z [ifup@eth1] No DHCPOFFERS received. 2022-10-30T18:52:00.037Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:52:00.036Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:52:00.033Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:52:00.033Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:52:00.032Z [init] Started KNX Daemon. 2022-10-30T18:52:00.030Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:52:00.028Z [] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:51:59.992Z [init] Starting KNX Daemon... 2022-10-30T18:51:59.987Z [init] Stopped KNX Daemon. 2022-10-30T18:51:59.985Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:51:56.399Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13 2022-10-30T18:51:56.397Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13 2022-10-30T18:51:49.801Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:51:49.801Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:51:49.799Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:51:49.797Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:51:49.795Z [init] Started KNX Daemon. 2022-10-30T18:51:49.794Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:51:49.791Z [] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:51:49.755Z [init] Starting KNX Daemon... 2022-10-30T18:51:49.750Z [init] Stopped KNX Daemon. 2022-10-30T18:51:49.748Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:51:41.954Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 15 2022-10-30T18:51:41.954Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 15 2022-10-30T18:51:41.952Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 15 2022-10-30T18:51:39.500Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:51:39.498Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:51:39.496Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:51:39.494Z [init] Started KNX Daemon. 2022-10-30T18:51:39.493Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:51:39.491Z [knxd] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:51:39.455Z [init] Starting KNX Daemon... 2022-10-30T18:51:39.450Z [init] Stopped KNX Daemon. 2022-10-30T18:51:39.450Z [init] Stopped KNX Daemon. 2022-10-30T18:51:39.448Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:51:39.103Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:39: MQTT publish: topic 'zigbee2mqtt/DT_Second_floor', payload '{"battery":100,"humidity":38.57,"last_seen":1667152859680,"temperature":23.32,"voltage":3000}' 2022-10-30T18:51:39.090Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:39: MQTT publish: topic 'zigbee2mqtt/DT_Bedroom', payload '{"battery":100,"humidity":38.98,"last_seen":1667152866894,"temperature":23.2,"voltage":3000}' 2022-10-30T18:51:39.079Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:39: MQTT publish: topic 'zigbee2mqtt/DT_Oven', payload '{"battery":100,"humidity":38.95,"last_seen":1667152470550,"temperature":23.25,"voltage":3000}' 2022-10-30T18:51:39.070Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:39: MQTT publish: topic 'zigbee2mqtt/DT_Kitchen', payload '{"battery":100,"humidity":38.69,"last_seen":1667152962084,"temperature":23.28,"voltage":3000}' 2022-10-30T18:51:38.796Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:38: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}' 2022-10-30T18:51:38.783Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:38: Connected to MQTT server 2022-10-30T18:51:38.407Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:38: Connecting to MQTT server at mqtt://localhost 2022-10-30T18:51:38.139Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:38: Zigbee: disabling joining new devices. 2022-10-30T18:51:38.139Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:38: Zigbee: disabling joining new devices. 2022-10-30T18:51:38.134Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:38: DT_Second_floor (0xa4c138c59270195a): TS0201 - TuYa Temperature & humidity sensor with display (EndDevice) 2022-10-30T18:51:38.127Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:38: DT_Bedroom (0xa4c1381156c790e7): TS0201 - TuYa Temperature & humidity sensor with display (EndDevice) 2022-10-30T18:51:38.123Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:38: DT_Oven (0xa4c1380684f4a1c5): TS0201 - TuYa Temperature & humidity sensor with display (EndDevice) 2022-10-30T18:51:38.114Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:38: DT_Kitchen (0xa4c138e54e8f4689): TS0201 - TuYa Temperature & humidity sensor with display (EndDevice) 2022-10-30T18:51:38.105Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:38: Currently 4 devices are joined: 2022-10-30T18:51:38.071Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:38: Coordinator firmware version: '{"meta":{"maintrel":3,"majorrel":2,"minorrel":6,"product":0,"revision":20211115,"transportrev":2},"type":"zStack12"}' 2022-10-30T18:51:38.065Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:38: zigbee-herdsman started (resumed) 2022-10-30T18:51:32.943Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:32: Starting zigbee-herdsman (0.14.34) 2022-10-30T18:51:32.932Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:32: Starting Zigbee2MQTT version 1.25.2 (commit #e8528512) 2022-10-30T18:51:32.932Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:32: Starting Zigbee2MQTT version 1.25.2 (commit #e8528512) 2022-10-30T18:51:32.822Z [zigbee2mqtt] Zigbee2MQTT:info 2022-10-30 21:51:32: Logging to console and directory: '/mnt/data/root/zigbee2mqtt/data/log/2022-10-30.21-51-32' filename: log.txt 2022-10-30T18:51:31.713Z [wb-mqtt-confed] INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-serial.schema.json 2022-10-30T18:51:29.786Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 12 2022-10-30T18:51:29.784Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 12 2022-10-30T18:51:29.529Z [wb-mqtt-confed] INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-gpio.schema.json 2022-10-30T18:51:29.207Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:51:29.206Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:51:29.204Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:51:29.202Z [init] Started KNX Daemon. 2022-10-30T18:51:29.202Z [init] Started KNX Daemon. 2022-10-30T18:51:29.190Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:51:29.188Z [knxd] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:51:29.139Z [init] Starting KNX Daemon... 2022-10-30T18:51:29.131Z [init] Stopped KNX Daemon. 2022-10-30T18:51:29.129Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:51:28.941Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 184) 2022-10-30T18:51:28.941Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 177) 2022-10-30T18:51:28.941Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 170) 2022-10-30T18:51:28.941Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 163) 2022-10-30T18:51:28.941Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 163) 2022-10-30T18:51:28.941Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 156) 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 149) 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 142) 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 135) 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 80) 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [gpio driver] Started 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 73) 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 66) 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 2:7 (EXT2_R3A8) 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 2:7 (EXT2_R3A8) 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 2:6 (EXT2_R3A7) 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 2:5 (EXT2_R3A6) 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 2:4 (EXT2_R3A5) 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 2:3 (EXT2_R3A4) 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 2:3 (EXT2_R3A4) 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 2:2 (EXT2_R3A3) 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 2:1 (EXT2_R3A2) 2022-10-30T18:51:28.877Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 2:0 (EXT2_R3A1) 2022-10-30T18:51:28.796Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 35) 2022-10-30T18:51:28.796Z [wb-mqtt-gpio] INFO: [gpio chip driver] Listening to GPIO line 1:7 (EXT1_IN8) 2022-10-30T18:51:28.796Z [wb-mqtt-gpio] INFO: [gpio chip driver] Listening to GPIO line 1:6 (EXT1_IN7) 2022-10-30T18:51:28.796Z [wb-mqtt-gpio] INFO: [gpio chip driver] Listening to GPIO line 1:5 (EXT1_IN6) 2022-10-30T18:51:28.796Z [wb-mqtt-gpio] INFO: [gpio chip driver] Listening to GPIO line 1:4 (EXT1_IN5) 2022-10-30T18:51:28.796Z [wb-mqtt-gpio] INFO: [gpio chip driver] Listening to GPIO line 1:3 (EXT1_IN4) 2022-10-30T18:51:28.796Z [wb-mqtt-gpio] INFO: [gpio chip driver] Listening to GPIO line 1:3 (EXT1_IN4) 2022-10-30T18:51:28.796Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 28) 2022-10-30T18:51:28.796Z [wb-mqtt-gpio] INFO: [gpio chip driver] Listening to GPIO line 1:2 (EXT1_IN3) 2022-10-30T18:51:28.796Z [wb-mqtt-gpio] INFO: [gpio chip driver] Listening to GPIO line 1:1 (EXT1_IN2) 2022-10-30T18:51:28.796Z [wb-mqtt-gpio] INFO: [gpio chip driver] Listening to GPIO line 1:0 (EXT1_IN1) 2022-10-30T18:51:28.796Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 21) 2022-10-30T18:51:28.740Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 14) 2022-10-30T18:51:28.740Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 0:36 (MOD1_OUT1) 2022-10-30T18:51:28.740Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 0:130 (V_OUT) 2022-10-30T18:51:28.740Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT) 2022-10-30T18:51:28.740Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 0:129 (5V_OUT) 2022-10-30T18:51:28.727Z [wb-mqtt-gpio] INFO: [gpio chip driver] Listening to GPIO line 0:228 (D1_IN) 2022-10-30T18:51:28.727Z [wb-mqtt-gpio] INFO: [gpio chip driver] Listening to GPIO line 0:227 (A3_IN) 2022-10-30T18:51:28.727Z [wb-mqtt-gpio] INFO: [gpio chip driver] Listening to GPIO line 0:230 (A2_IN) 2022-10-30T18:51:28.727Z [wb-mqtt-gpio] INFO: [gpio chip driver] Listening to GPIO line 0:231 (A1_IN) 2022-10-30T18:51:28.716Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 0:106 (D1_OUT) 2022-10-30T18:51:28.716Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 0:107 (A3_OUT) 2022-10-30T18:51:28.716Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 0:108 (A2_OUT) 2022-10-30T18:51:28.713Z [wb-mqtt-gpio] INFO: [gpio chip driver] Initialized output GPIO line 0:109 (A1_OUT) 2022-10-30T18:51:28.707Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 2) 2022-10-30T18:51:28.707Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 2) 2022-10-30T18:51:28.707Z [wb-mqtt-gpio] INFO: [mqtt] subscription succeeded (message id 1) 2022-10-30T18:51:28.705Z [watchdog] hardware watchdog identity: GPIO Watchdog 2022-10-30T18:51:28.703Z [wb-mqtt-gpio] INFO: [mqtt] connection estabilished with code "0" 2022-10-30T18:51:28.701Z [watchdog] watchdog now set to 60 seconds 2022-10-30T18:51:28.698Z [init] Startup finished in 3.838s (kernel) + 30.685s (userspace) = 34.523s. 2022-10-30T18:51:28.696Z [watchdog] alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no 2022-10-30T18:51:28.693Z [init] Started watchdog daemon. 2022-10-30T18:51:28.692Z [watchdog] repair attempts = 1 2022-10-30T18:51:28.689Z [init] Started Update UTMP about System Runlevel Changes. 2022-10-30T18:51:28.689Z [init] Started Update UTMP about System Runlevel Changes. 2022-10-30T18:51:28.687Z [watchdog] error retry time-out = 30 seconds 2022-10-30T18:51:28.672Z [watchdog] no repair binary files 2022-10-30T18:51:28.671Z [watchdog] no test binary files 2022-10-30T18:51:28.669Z [watchdog] temperature: no sensors to check 2022-10-30T18:51:28.667Z [watchdog] interface: no interface to check 2022-10-30T18:51:28.665Z [watchdog] pidfile: /var/run/sshd.pid 2022-10-30T18:51:28.663Z [watchdog] file: no file to check 2022-10-30T18:51:28.661Z [watchdog] ping: no machine to check 2022-10-30T18:51:28.659Z [watchdog] memory: minimum pages = 256 free, 0 allocatable (4096 byte pages) 2022-10-30T18:51:28.659Z [watchdog] memory: minimum pages = 256 free, 0 allocatable (4096 byte pages) 2022-10-30T18:51:28.653Z [watchdog] int=1s realtime=yes sync=no load=0,0,0 soft=no 2022-10-30T18:51:28.649Z [wb-mqtt-gpio] INFO: [mqtt] UNIX socket not found, falling back to TCP connection 2022-10-30T18:51:28.649Z [wb-mqtt-gpio] INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock 2022-10-30T18:51:28.644Z [watchdog] starting daemon (5.15): 2022-10-30T18:51:28.592Z [wb-mqtt-gpio] INFO: [gpio] Kernel uses monotonic clock for interrupt timestamps 2022-10-30T18:51:28.562Z [init] Starting Update UTMP about System Runlevel Changes... 2022-10-30T18:51:28.554Z [init] Reached target Graphical Interface. 2022-10-30T18:51:28.551Z [init] Starting watchdog daemon... 2022-10-30T18:51:28.542Z [init] Reached target Multi-User System. 2022-10-30T18:51:28.542Z [init] Reached target Multi-User System. 2022-10-30T18:51:28.537Z [init] Started MQTT Driver for GPIO-controlled switches. 2022-10-30T18:51:27.949Z [] mod1_pinmux_dummy: disabling 2022-10-30T18:51:27.948Z [] vcc-sd: disabling 2022-10-30T18:51:27.948Z [] vdd-sd-power: disabling 2022-10-30T18:51:27.916Z [] dldo4: disabling 2022-10-30T18:51:27.916Z [] dc5ldo: disabling 2022-10-30T18:51:27.915Z [] vcc-gmac-phy: disabling 2022-10-30T18:51:21.553Z [wb-mqtt-confed] INFO: reloading file: /var/lib/wb-mqtt-confed/schemas/wb-mqtt-adc.schema.json 2022-10-30T18:51:20.912Z [wb-mqtt-adc] INFO: [mqtt] subscription succeeded (message id 33) 2022-10-30T18:51:20.912Z [wb-mqtt-adc] INFO: [mqtt] subscription succeeded (message id 33) 2022-10-30T18:51:20.912Z [wb-mqtt-adc] INFO: [mqtt] subscription succeeded (message id 32) 2022-10-30T18:51:20.893Z [wb-mqtt-adc] INFO: [wb-adc] Channel Vin MQTT controls are created, poll interval 700 ms 2022-10-30T18:51:20.889Z [wb-mqtt-adc] INFO: [wb-adc] Channel A3 MQTT controls are created, poll interval 700 ms 2022-10-30T18:51:20.889Z [wb-mqtt-adc] INFO: [wb-adc] Channel A2 MQTT controls are created, poll interval 700 ms 2022-10-30T18:51:20.887Z [wb-mqtt-adc] INFO: [wb-adc] Channel A1 MQTT controls are created, poll interval 700 ms 2022-10-30T18:51:20.761Z [wb-mqtt-adc] INFO: [wb-adc] ADC worker thread is started 2022-10-30T18:51:20.761Z [wb-mqtt-adc] INFO: [wb-adc] /sys/bus/iio/devices/iio:device4/in_voltage0_scale = 12.7268 2022-10-30T18:51:20.754Z [wb-mqtt-adc] INFO: [wb-adc] /sys/bus/iio/devices/iio:device3/in_voltage0_scale = 7.6228 2022-10-30T18:51:20.754Z [wb-mqtt-adc] INFO: [wb-adc] /sys/bus/iio/devices/iio:device2/in_voltage0_scale = 7.6228 2022-10-30T18:51:20.754Z [wb-mqtt-adc] INFO: [wb-adc] /sys/bus/iio/devices/iio:device2/in_voltage0_scale = 7.6228 2022-10-30T18:51:20.754Z [wb-mqtt-adc] INFO: [wb-adc] /sys/bus/iio/devices/iio:device1/in_voltage0_scale = 7.6228 2022-10-30T18:51:20.754Z [wb-mqtt-adc] INFO: [wb-adc] Creating driver MQTT controls 2022-10-30T18:51:20.735Z [wb-mqtt-adc] INFO: [mqtt] subscription succeeded (message id 2) 2022-10-30T18:51:20.735Z [wb-mqtt-adc] INFO: [mqtt] subscription succeeded (message id 1) 2022-10-30T18:51:20.731Z [wb-mqtt-adc] INFO: [mqtt] connection estabilished with code "0" 2022-10-30T18:51:20.688Z [wb-mqtt-adc] INFO: [mqtt] UNIX socket not found, falling back to TCP connection 2022-10-30T18:51:20.686Z [wb-mqtt-adc] INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock 2022-10-30T18:51:20.654Z [wb-mqtt-adc] MQTT broker localhost:1883 2022-10-30T18:51:20.561Z [init] Started MQTT Driver for ADC. 2022-10-30T18:51:20.561Z [init] Started MQTT Driver for ADC. 2022-10-30T18:51:19.994Z [wb-rules] WARNING: [device] Unknown metadata for device metrics: 'error' 2022-10-30T18:51:19.950Z [wb-mqtt-serial] ERROR: [serial] Error parsing config file: no devices defined in config. Nothing to do 2022-10-30T18:51:19.943Z [wb-mqtt-serial] INFO: [serial port] "/sys/class/tty/ttyS4/rx_trig_bytes" = 32 2022-10-30T18:51:19.939Z [wb-mqtt-serial] INFO: [serial port] "/sys/class/tty/ttyS2/rx_trig_bytes" = 32 2022-10-30T18:51:18.901Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:51:18.891Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:51:18.867Z [wb-rules] INFO: all rule files are loaded 2022-10-30T18:51:18.865Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:51:18.854Z [init] Started KNXD Configurator for Wiren Board. 2022-10-30T18:51:18.854Z [init] Started KNXD Configurator for Wiren Board. 2022-10-30T18:51:18.842Z [init] Started KNX Daemon. 2022-10-30T18:51:18.838Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:51:18.838Z [] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:51:18.825Z [wb-rules] INFO: /usr/share/wb-rules/load_alarms.js is NOT under source root /etc/wb-rules 2022-10-30T18:51:18.810Z [wb-rules] INFO: [rule info] add your rules to /etc/wb-rules/ 2022-10-30T18:51:18.709Z [init] Starting KNX Daemon... 2022-10-30T18:51:18.685Z [init] Stopped KNX Daemon. 2022-10-30T18:51:18.649Z [wb-rules] INFO: [rule info] error running command callback for /bin/sh: Error: error error (rc -100) anon native strict preventsyield init /usr/share/wb-rules-system/rules/wb-mqtt-dac.js:14 anon /usr/share/wb-rules-system/rules/wb-mqtt-dac.js:77 anon /usr/share/wb-rules-system/scripts/lib.js:331 preventsyield 2022-10-30T18:51:18.647Z [wb-rules] ERROR: [rule error] failed to open config file: /etc/wb-mqtt-dac.conf 2022-10-30T18:51:18.647Z [wb-rules] ERROR: [rule error] failed to open config file: /etc/wb-mqtt-dac.conf 2022-10-30T18:51:18.645Z [wb-rules] ERROR: [rule error] failed to open config file: /var/lib/wb-mqtt-dac/conf.d/system.conf 2022-10-30T18:51:18.549Z [wb-rules] INFO: /usr/share/wb-rules-system/rules/wbmz-battery.js is NOT under source root /etc/wb-rules 2022-10-30T18:51:18.456Z [wb-rules] INFO: system/DTS Version: failed to convert value '', passing raw 2022-10-30T18:51:18.435Z [wb-knxd-config] No /dev/ttyKNX found, disabling level2 2022-10-30T18:51:18.214Z [wb-rules] sh: 4: /etc/wb_env.sh: source: not found 2022-10-30T18:51:18.194Z [wb-rules] INFO: /usr/share/wb-rules-system/rules/wb-zigbee2mqtt.js is NOT under source root /etc/wb-rules 2022-10-30T18:51:18.130Z [wb-mqtt-db] WARNING: [conventions] converting empty value to boolean "false" 2022-10-30T18:51:18.047Z [wb-rules] INFO: /usr/share/wb-rules-system/rules/wb-mqtt-dac.js is NOT under source root /etc/wb-rules 2022-10-30T18:51:17.967Z [wb-rules] INFO: /usr/share/wb-rules-system/rules/system.js is NOT under source root /etc/wb-rules 2022-10-30T18:51:17.967Z [wb-rules] INFO: /usr/share/wb-rules-system/rules/system.js is NOT under source root /etc/wb-rules 2022-10-30T18:51:17.841Z [wb-rules] INFO: /usr/share/wb-rules-system/rules/power_status.js is NOT under source root /etc/wb-rules 2022-10-30T18:51:17.830Z [wb-rules] INFO: network/GPRS IP: failed to convert value '', passing raw 2022-10-30T18:51:17.777Z [wb-rules] INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw 2022-10-30T18:51:17.768Z [wb-rules] INFO: network/Ethernet 2 IP: failed to convert value '', passing raw 2022-10-30T18:51:17.737Z [wb-rules] Device "ppp0" does not exist. 2022-10-30T18:51:17.637Z [wb-rules] INFO: /usr/share/wb-rules-system/rules/power-class-battery.js is NOT under source root /etc/wb-rules 2022-10-30T18:51:17.550Z [wb-rules] INFO: /usr/share/wb-rules-system/rules/network.js is NOT under source root /etc/wb-rules 2022-10-30T18:51:17.496Z [wb-rules] INFO: /usr/share/wb-rules-system/rules/hwmon.js is NOT under source root /etc/wb-rules 2022-10-30T18:51:17.404Z [wb-rules] INFO: /usr/share/wb-rules-system/rules/buzzer.js is NOT under source root /etc/wb-rules 2022-10-30T18:51:17.404Z [wb-rules] INFO: /usr/share/wb-rules-system/rules/buzzer.js is NOT under source root /etc/wb-rules 2022-10-30T18:51:17.398Z [wb-rules] INFO: [engine] Starting sync loop 2022-10-30T18:51:17.396Z [wb-rules] INFO: the engine is ready 2022-10-30T18:51:17.394Z [wb-rules] INFO: [engine] Starting main loop 2022-10-30T18:51:17.324Z [wb-mqtt-db] INFO: [mqtt] subscription succeeded (message id 15) 2022-10-30T18:51:17.282Z [wb-mqtt-db] INFO: [mqtt] subscription succeeded (message id 13) 2022-10-30T18:51:17.230Z [wb-mqtt-db] INFO: [mqtt] subscription succeeded (message id 10) 2022-10-30T18:51:17.200Z [wb-mqtt-db] INFO: [mqtt] subscription succeeded (message id 9) 2022-10-30T18:51:17.137Z [wb-rules] INFO: [wbgo_mqtt] wb-rules-engine-wirenboard-AUCNYTO-2770: MQTT connection established 2022-10-30T18:51:17.128Z [wb-rules] INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB 2022-10-30T18:51:17.128Z [wb-rules] INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB 2022-10-30T18:51:17.105Z [wb-rules] INFO: driver is ready 2022-10-30T18:51:17.074Z [wb-mqtt-db] INFO: [mqtt] subscription succeeded (message id 8) 2022-10-30T18:51:17.067Z [wb-mqtt-db] INFO: [mqtt] subscription succeeded (message id 7) 2022-10-30T18:51:17.031Z [wb-mqtt-db] INFO: [mqtt] subscription succeeded (message id 6) 2022-10-30T18:51:17.031Z [wb-mqtt-db] INFO: [mqtt] subscription succeeded (message id 5) 2022-10-30T18:51:17.016Z [wb-mqtt-db] INFO: [mqtt] subscription succeeded (message id 2) 2022-10-30T18:51:17.015Z [wb-mqtt-db] INFO: [mqtt] subscription succeeded (message id 1) 2022-10-30T18:51:17.005Z [wb-mqtt-db] INFO: [mqtt] connection estabilished with code "0" 2022-10-30T18:51:16.936Z [wb-mqtt-db] INFO: DB logger started, go to main loop 2022-10-30T18:51:16.936Z [wb-mqtt-db] INFO: DB logger started, go to main loop 2022-10-30T18:51:16.858Z [wb-rules] INFO: wait for driver to become ready 2022-10-30T18:51:16.856Z [wb-rules] INFO: driver loop is started 2022-10-30T18:51:16.835Z [wb-rules] INFO: [wbgo_mqtt] rules-wirenboard-AUCNYTO-2770: MQTT connection established 2022-10-30T18:51:16.811Z [wb-rules] INFO: driver is created 2022-10-30T18:51:16.757Z [wb-mqtt-db] INFO: [sqlite] DB initialization is done 2022-10-30T18:51:16.677Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13 2022-10-30T18:51:16.674Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13 2022-10-30T18:51:16.633Z [wb-mqtt-knx] INFO: [knx] KNX connection successful 2022-10-30T18:51:16.612Z [wb-mqtt-knx] INFO: [mqtt] subscription succeeded (message id 13) 2022-10-30T18:51:16.612Z [wb-mqtt-knx] INFO: [mqtt] subscription succeeded (message id 13) 2022-10-30T18:51:16.589Z [wb-mqtt-knx] INFO: [mqtt] subscription succeeded (message id 2) 2022-10-30T18:51:16.587Z [wb-mqtt-knx] INFO: [mqtt] subscription succeeded (message id 1) 2022-10-30T18:51:16.575Z [wb-mqtt-knx] INFO: [mqtt] connection estabilished with code "0" 2022-10-30T18:51:16.493Z [wb-mqtt-knx] INFO: [mqtt] UNIX socket not found, falling back to TCP connection 2022-10-30T18:51:16.489Z [wb-mqtt-knx] INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock 2022-10-30T18:51:16.416Z [wb-mqtt-w1] INFO: [mqtt] subscription succeeded (message id 9) 2022-10-30T18:51:16.414Z [wb-mqtt-w1] INFO: [mqtt] subscription succeeded (message id 8) 2022-10-30T18:51:16.406Z [wb-mqtt-w1] INFO: w1 thread Started 2022-10-30T18:51:16.355Z [wb-mqtt-w1] INFO: [mqtt] subscription succeeded (message id 2) 2022-10-30T18:51:16.355Z [wb-mqtt-w1] INFO: [mqtt] subscription succeeded (message id 2) 2022-10-30T18:51:16.355Z [wb-mqtt-w1] INFO: [mqtt] subscription succeeded (message id 1) 2022-10-30T18:51:16.351Z [wb-mqtt-w1] INFO: [mqtt] connection estabilished with code "0" 2022-10-30T18:51:16.316Z [wb-mqtt-db] INFO: [sqlite] Analyzing data table 2022-10-30T18:51:16.316Z [wb-mqtt-db] INFO: [sqlite] Create indices if necessary 2022-10-30T18:51:16.310Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:51:16.300Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:51:16.297Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:51:16.295Z [wb-mqtt-db] INFO: [sqlite] Creating tables if necessary 2022-10-30T18:51:16.271Z [wb-mqtt-w1] INFO: [mqtt] UNIX socket not found, falling back to TCP connection 2022-10-30T18:51:16.271Z [wb-mqtt-w1] INFO: [mqtt] UNIX socket not found, falling back to TCP connection 2022-10-30T18:51:16.271Z [wb-mqtt-w1] INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock 2022-10-30T18:51:16.265Z [wb-mqtt-w1] MQTT broker localhost:1883 2022-10-30T18:51:16.257Z [init] Started Wiren Board MQTT KNX bridge. 2022-10-30T18:51:16.251Z [init] Started KNX Daemon. 2022-10-30T18:51:16.248Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:51:16.248Z [] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:51:16.227Z [wb-mqtt-db] INFO: [mqtt] UNIX socket not found, falling back to TCP connection 2022-10-30T18:51:16.224Z [wb-mqtt-db] INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock 2022-10-30T18:51:16.211Z [wb-mqtt-db] Config file /etc/wb-mqtt-db.conf 2022-10-30T18:51:16.211Z [wb-mqtt-db] Config file /etc/wb-mqtt-db.conf 2022-10-30T18:51:16.209Z [wb-mqtt-db] MQTT broker localhost:1883 2022-10-30T18:51:16.127Z [init] Started one-click diagnostic data collector for Wiren Board, generating archive with data. 2022-10-30T18:51:16.120Z [init] Started MQTT Driver for serial devices. 2022-10-30T18:51:16.111Z [init] Started Kernel 1-Wire MQTT driver for WB-HomA. 2022-10-30T18:51:16.098Z [init] Starting KNXD Configurator for Wiren Board... 2022-10-30T18:51:16.084Z [init] Started MQTT Rule engine for Wiren Board. 2022-10-30T18:51:16.074Z [init] Started metrics sender.. 2022-10-30T18:51:16.059Z [init] Starting MQTT Driver for GPIO-controlled switches... 2022-10-30T18:51:16.053Z [init] Starting MQTT Driver for ADC... 2022-10-30T18:51:16.053Z [init] Starting MQTT Driver for ADC... 2022-10-30T18:51:16.047Z [init] Started Wiren Board database logger. 2022-10-30T18:51:16.040Z [init] Starting KNX Daemon... 2022-10-30T18:51:16.032Z [init] Stopped KNX Daemon. 2022-10-30T18:51:16.029Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:51:16.027Z [init] Started Initialize Wiren Board Device Tree overlays. 2022-10-30T18:51:16.026Z [wb-hwconf-manager] ... 2022-10-30T18:51:15.836Z [] iio-rescale wbmz4-supercap-cell-volt: using raw+scale source channel 2022-10-30T18:51:15.706Z [wb-hwconf-manager] ...Initializing wb72-wbmz4:wbmz4-supercap. 2022-10-30T18:51:15.564Z [wb-hwconf-manager] ...Initializing wb72-wbc:wbc-4g-usb. 2022-10-30T18:51:15.564Z [wb-hwconf-manager] ...Initializing wb72-wbc:wbc-4g-usb. 2022-10-30T18:51:15.419Z [wb-hwconf-manager] ...Initializing wb72-w2:wb6-wx-1wire. 2022-10-30T18:51:15.270Z [wb-hwconf-manager] Initializing wb72-w1:wb6-wx-1wire. 2022-10-30T18:51:15.235Z [wb-hwconf-manager] terminators are enabled 2022-10-30T18:51:15.200Z [wb-hwconf-manager] ...failsafe bias enabled 2022-10-30T18:51:15.065Z [] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 131, base_baud = 1500000) is a Allwinner sun4i 2022-10-30T18:51:14.923Z [wb-hwconf-manager] Initializing wb72-rs485-2:wb67-can-rs485. 2022-10-30T18:51:14.907Z [wb-hwconf-manager] terminators are enabled 2022-10-30T18:51:14.872Z [wb-hwconf-manager] ...failsafe bias enabled 2022-10-30T18:51:14.629Z [wb-hwconf-manager] ...Initializing wb72-rs485-1:wb67-can-rs485. 2022-10-30T18:51:14.629Z [wb-hwconf-manager] ...Initializing wb72-rs485-1:wb67-can-rs485. 2022-10-30T18:51:14.584Z [] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 130, base_baud = 1500000) is a Allwinner sun4i 2022-10-30T18:51:14.525Z [zigbee2mqtt] Zigbee2MQTT requires node version ^14 || ^16 || ^17 || ^18, you are running v12.19.0! 2022-10-30T18:51:14.454Z [wb-hwconf-manager] ...Initializing wb72-mod4:wbe2r-r-zigbee. 2022-10-30T18:51:14.235Z [wb-hwconf-manager] ...Initializing wb72-mod1:wbe2-do-r6c-1. 2022-10-30T18:51:14.016Z [wb-hwconf-manager] ...Initializing wb72-extio2:wbio-do-r3a-8. 2022-10-30T18:51:13.704Z [wb-hwconf-manager] Initializing wb72-extio1:wbio-di-hvd-8. 2022-10-30T18:51:13.215Z [init] Started Initialize Wiren Board on successful boot. 2022-10-30T18:51:12.737Z [init] Started Restore local date from Wiren Board GSM RTC. 2022-10-30T18:51:12.732Z [wb-gsm-rtc-restore] No modem present; nothing to do 2022-10-30T18:51:12.732Z [wb-gsm-rtc-restore] No modem present; nothing to do 2022-10-30T18:51:12.081Z [zigbee2mqtt] > node index.js 2022-10-30T18:51:12.081Z [zigbee2mqtt] > zigbee2mqtt@1.25.2 start /mnt/data/root/zigbee2mqtt 2022-10-30T18:51:11.029Z [ntp] error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:51:10.029Z [ntp] error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:51:09.050Z [ntp] error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:51:09.030Z [ntp] Listen normally on 6 eth0 [fe80::285:1ff:fe01:7643%3]:123 2022-10-30T18:51:08.827Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8 2022-10-30T18:51:08.826Z [ifup@eth1] Sending on Socket/fallback 2022-10-30T18:51:08.823Z [ifup@eth1] Sending on LPF/eth1/00:85:01:01:20:9e 2022-10-30T18:51:08.823Z [ifup@eth1] Sending on LPF/eth1/00:85:01:01:20:9e 2022-10-30T18:51:08.817Z [ifup@eth1] DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8 2022-10-30T18:51:08.817Z [ifup@eth1] Sending on Socket/fallback 2022-10-30T18:51:08.817Z [ifup@eth1] Sending on LPF/eth1/00:85:01:01:20:9e 2022-10-30T18:51:08.817Z [ifup@eth1] Listening on LPF/eth1/00:85:01:01:20:9e 2022-10-30T18:51:08.815Z [ifup@eth1] Listening on LPF/eth1/00:85:01:01:20:9e 2022-10-30T18:51:08.727Z [ifup@eth1] For info, please visit https://www.isc.org/software/dhcp/ 2022-10-30T18:51:08.712Z [ifup@eth1] All rights reserved. 2022-10-30T18:51:08.709Z [ifup@eth1] Copyright 2004-2016 Internet Systems Consortium. 2022-10-30T18:51:08.701Z [ifup@eth1] For info, please visit https://www.isc.org/software/dhcp/ 2022-10-30T18:51:08.701Z [ifup@eth1] For info, please visit https://www.isc.org/software/dhcp/ 2022-10-30T18:51:08.701Z [ifup@eth1] All rights reserved. 2022-10-30T18:51:08.701Z [ifup@eth1] Copyright 2004-2016 Internet Systems Consortium. 2022-10-30T18:51:08.701Z [ifup@eth1] Internet Systems Consortium DHCP Client 4.3.5 2022-10-30T18:51:08.699Z [ifup@eth1] Internet Systems Consortium DHCP Client 4.3.5 2022-10-30T18:51:08.656Z [wb-mqtt-confed] INFO: MQTT connection established 2022-10-30T18:51:08.649Z [netplug] eth0: state INNING pid 1521 exited status 256 2022-10-30T18:51:08.487Z [netplug] /etc/netplug/netplug eth0 in -> pid 1521 2022-10-30T18:51:08.467Z [init] Started LSB: Brings up/down network automatically. 2022-10-30T18:51:08.319Z [ifup@eth1] Failed to generate wb_env cache in /var/run/wb_env.cache 2022-10-30T18:51:08.319Z [ifup@eth1] Failed to generate wb_env cache in /var/run/wb_env.cache 2022-10-30T18:51:08.309Z [ifup@eth1] mv: cannot stat '/tmp/tmp.rEKOX6eguO': No such file or directory 2022-10-30T18:51:08.309Z [ifup@eth1] mv: cannot stat '/tmp/tmp.rEKOX6eguO': No such file or directory 2022-10-30T18:51:08.279Z [wb-mqtt-mbgate] Topic zigbee2mqtt/Version taken from old config 2022-10-30T18:51:08.279Z [wb-mqtt-mbgate] Topic zigbee2mqtt/Update devices taken from old config 2022-10-30T18:51:08.279Z [wb-mqtt-mbgate] Topic zigbee2mqtt/State taken from old config 2022-10-30T18:51:08.279Z [wb-mqtt-mbgate] Topic zigbee2mqtt/Permit join taken from old config 2022-10-30T18:51:08.279Z [wb-mqtt-mbgate] Topic zigbee2mqtt/Log level taken from old config 2022-10-30T18:51:08.279Z [wb-mqtt-mbgate] Topic zigbee2mqtt/Log taken from old config 2022-10-30T18:51:08.279Z [wb-mqtt-mbgate] Topic wbrules/Rule debugging taken from old config 2022-10-30T18:51:08.279Z [wb-mqtt-mbgate] Topic wb-gpio/V_OUT taken from old config 2022-10-30T18:51:08.279Z [wb-mqtt-mbgate] Topic wb-gpio/MOD1_OUT1 taken from old config 2022-10-30T18:51:08.279Z [wb-mqtt-mbgate] Topic wb-gpio/MOD1_OUT1 taken from old config 2022-10-30T18:51:08.279Z [wb-mqtt-mbgate] Topic wb-gpio/EXT2_R3A8 taken from old config 2022-10-30T18:51:08.279Z [wb-mqtt-mbgate] Topic wb-gpio/EXT2_R3A7 taken from old config 2022-10-30T18:51:08.279Z [wb-mqtt-mbgate] Topic wb-gpio/EXT2_R3A6 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/EXT2_R3A5 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/EXT2_R3A4 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/EXT2_R3A3 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/EXT2_R3A2 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/EXT2_R3A1 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/EXT1_IN8 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/EXT1_IN8 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/EXT1_IN7 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/EXT1_IN6 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/EXT1_IN5 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/EXT1_IN4 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/EXT1_IN3 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/EXT1_IN2 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/EXT1_IN1 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/D1_OUT taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/D1_IN taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/D1_IN taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/A3_OUT taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/A3_IN taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/A2_OUT taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/A2_IN taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/A1_OUT taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/A1_IN taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-gpio/5V_OUT taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-adc/Vin taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-adc/A3 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-adc/A3 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-adc/A2 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic wb-adc/A1 taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic system/Temperature Grade taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic system/Short SN taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic system/Release suite taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic system/Release name taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic system/Reboot taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic system/Manufacturing Date taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic system/HW Revision taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic system/HW Revision taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic system/DTS Version taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic system/Current uptime taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic system/Batch No taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic power_status/working on battery taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic power_status/Vin taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic network/Wi-Fi IP taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic network/Wi-Fi 2 IP taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic network/GPRS IP taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic network/Ethernet IP taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic network/Ethernet IP taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic network/Ethernet 2 IP taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic metrics/swap_used taken from old config 2022-10-30T18:51:08.218Z [wb-mqtt-mbgate] Topic metrics/swap_total taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic metrics/ram_used taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic metrics/ram_total taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic metrics/ram_available taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic metrics/load_average_5min taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic metrics/load_average_1min taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic metrics/load_average_15min taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic metrics/load_average_15min taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic metrics/dev_root_used_space taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic metrics/dev_root_total_space taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic metrics/dev_root_linked_on taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic metrics/data_used_space taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic metrics/data_total_space taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic knx/data taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic hwmon/CPU Temperature taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic hwmon/Board Temperature taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic buzzer/volume taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic buzzer/volume taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic buzzer/frequency taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic buzzer/enabled taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic battery/Voltage taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic battery/Power taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic battery/Percentage taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic battery/Current taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic battery/Charging taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic alarms/log taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Second_floor/voltage taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Second_floor/voltage taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Second_floor/temperature taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Second_floor/linkquality taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Second_floor/last_seen taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Second_floor/humidity taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Second_floor/battery taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Oven/voltage taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Oven/temperature taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Oven/linkquality taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Oven/last_seen taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Oven/last_seen taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Oven/humidity taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Oven/battery taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Kitchen/voltage taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Kitchen/temperature taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Kitchen/linkquality taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Kitchen/last_seen taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Kitchen/humidity taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Kitchen/battery taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Bedroom/voltage taken from old config 2022-10-30T18:51:08.151Z [wb-mqtt-mbgate] Topic DT_Bedroom/voltage taken from old config 2022-10-30T18:51:08.139Z [wb-mqtt-mbgate] INFO: [mqtt] connection estabilished with code "0" 2022-10-30T18:51:08.139Z [wb-mqtt-mbgate] INFO: [mbgate] Start loops 2022-10-30T18:51:08.139Z [wb-mqtt-mbgate] INFO: [modbus] Modbus listening 2022-10-30T18:51:08.139Z [wb-mqtt-mbgate] INFO: [mqtt] UNIX socket not found, falling back to TCP connection 2022-10-30T18:51:08.139Z [wb-mqtt-mbgate] INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] Topic DT_Bedroom/temperature taken from old config 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] Topic DT_Bedroom/linkquality taken from old config 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] Topic DT_Bedroom/last_seen taken from old config 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] Topic DT_Bedroom/humidity taken from old config 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] Topic DT_Bedroom/humidity taken from old config 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] Topic DT_Bedroom/battery taken from old config 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] Old config is detected 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /tmp/1667155867.0657246/retain_hack 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/voltage/meta/readonly 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/voltage/meta/order 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/voltage/meta/type 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/temperature/meta/order 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/temperature/meta/type 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/temperature/meta/readonly 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/temperature/meta/readonly 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/linkquality/meta/order 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/linkquality/meta/type 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/linkquality/meta/readonly 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/last_seen/meta/readonly 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/last_seen/meta/order 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/last_seen/meta/type 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/humidity/meta/readonly 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/humidity/meta/order 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/humidity/meta/type 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/humidity/meta/type 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/battery/meta/readonly 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/battery/meta/order 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Second_floor/controls/battery/meta/type 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/voltage/meta/order 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/voltage/meta/type 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/voltage/meta/readonly 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/temperature/meta/readonly 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/temperature/meta/order 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/temperature/meta/type 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/temperature/meta/type 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/linkquality/meta/readonly 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/linkquality/meta/order 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/linkquality/meta/type 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/last_seen/meta/order 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/last_seen/meta/type 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/last_seen/meta/readonly 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/humidity/meta/readonly 2022-10-30T18:51:08.080Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/humidity/meta/order 2022-10-30T18:51:08.078Z [ntp] error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:51:08.078Z [ntp] error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:51:08.061Z [wb-mqtt-logs] INFO: [mqtt] subscription succeeded (message id 3) 2022-10-30T18:51:08.061Z [wb-mqtt-logs] INFO: [mqtt] subscription succeeded (message id 2) 2022-10-30T18:51:08.061Z [wb-mqtt-logs] INFO: [mqtt] subscription succeeded (message id 1) 2022-10-30T18:51:08.061Z [wb-mqtt-logs] INFO: [mqtt] connection estabilished with code "0" 2022-10-30T18:51:08.059Z [init] Started Wiren Board MQTT to Modbus TCP gateway. 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/humidity/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/battery/meta/order 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/battery/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/battery/meta/readonly 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Bedroom/controls/battery/meta/readonly 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/voltage/meta/readonly 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/voltage/meta/order 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/voltage/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/temperature/meta/readonly 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/temperature/meta/order 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/temperature/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/linkquality/meta/readonly 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/linkquality/meta/order 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/linkquality/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/linkquality/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/last_seen/meta/readonly 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/last_seen/meta/order 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/last_seen/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/humidity/meta/readonly 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/humidity/meta/order 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/humidity/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/battery/meta/readonly 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/battery/meta/order 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/battery/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Oven/controls/battery/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/voltage/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/voltage/meta/readonly 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/voltage/meta/order 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/battery/meta/readonly 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/battery/meta/order 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/battery/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/linkquality/meta/readonly 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/linkquality/meta/order 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/linkquality/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/linkquality/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/temperature/meta/readonly 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/temperature/meta/order 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/temperature/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/last_seen/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/last_seen/meta/readonly 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/last_seen/meta/order 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/humidity/meta/type 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/humidity/meta/readonly 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/humidity/meta/order 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/DT_Kitchen/controls/humidity/meta/order 2022-10-30T18:51:07.989Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/Version/meta/readonly 2022-10-30T18:51:07.989Z [] random: 7 urandom warning(s) missed due to ratelimiting 2022-10-30T18:51:07.988Z [] random: crng init done 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/Version/meta/order 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/Version/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/Update devices/meta/readonly 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/Update devices/meta/order 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/Update devices/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/State/meta/readonly 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/State/meta/readonly 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/State/meta/order 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/State/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/Permit join/meta/readonly 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/Permit join/meta/order 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/Permit join/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/Log level/meta/readonly 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/Log level/meta/order 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/Log level/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/Log/meta/readonly 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/Log/meta/readonly 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/Log/meta/order 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/zigbee2mqtt/controls/Log/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/battery/controls/Power/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/battery/controls/Power/meta/readonly 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/battery/controls/Power/meta/order 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/battery/controls/Current/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/battery/controls/Current/meta/readonly 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/battery/controls/Current/meta/order 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/battery/controls/Charging/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/battery/controls/Charging/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/battery/controls/Charging/meta/readonly 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/battery/controls/Charging/meta/order 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/battery/controls/Voltage/meta/readonly 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/battery/controls/Voltage/meta/order 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/battery/controls/Voltage/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/battery/controls/Percentage/meta/readonly 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/battery/controls/Percentage/meta/order 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/battery/controls/Percentage/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A8/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A8/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A8/meta/readonly 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A8/meta/order 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN8/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN8/meta/readonly 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN8/meta/order 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN7/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN7/meta/readonly 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN7/meta/order 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN6/meta/type 2022-10-30T18:51:07.846Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN6/meta/type 2022-10-30T18:51:07.844Z [avahi-daemon] Registering new address record for fe80::285:1ff:fe01:7643 on eth0.*. 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN6/meta/readonly 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN6/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN5/meta/type 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN5/meta/readonly 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN5/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN4/meta/type 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN4/meta/readonly 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN4/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN4/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN3/meta/type 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN3/meta/readonly 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN3/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A7/meta/type 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A7/meta/readonly 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A7/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A6/meta/type 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A6/meta/readonly 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A6/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A6/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A5/meta/type 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A5/meta/readonly 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A5/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A4/meta/type 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A4/meta/readonly 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A4/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A3/meta/type 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A3/meta/readonly 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A3/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A3/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A2/meta/type 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A2/meta/readonly 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A2/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A1/meta/type 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A1/meta/readonly 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT2_R3A1/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN2/meta/type 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN2/meta/readonly 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN2/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN2/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN1/meta/type 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN1/meta/readonly 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/EXT1_IN1/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/MOD1_OUT1/meta/type 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/MOD1_OUT1/meta/readonly 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/MOD1_OUT1/meta/order 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/V_OUT/meta/type 2022-10-30T18:51:07.672Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/V_OUT/meta/readonly 2022-10-30T18:51:07.671Z [avahi-daemon] New relevant interface eth0.IPv6 for mDNS. 2022-10-30T18:51:07.671Z [avahi-daemon] New relevant interface eth0.IPv6 for mDNS. 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/V_OUT/meta/order 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/5V_OUT/meta/type 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/5V_OUT/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/5V_OUT/meta/order 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/D1_IN/meta/type 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/D1_IN/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/D1_IN/meta/order 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A3_IN/meta/type 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A3_IN/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A3_IN/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A3_IN/meta/order 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A2_IN/meta/type 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A2_IN/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A2_IN/meta/order 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A1_IN/meta/type 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A1_IN/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A1_IN/meta/order 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/D1_OUT/meta/type 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/D1_OUT/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/D1_OUT/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/D1_OUT/meta/order 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A3_OUT/meta/type 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A3_OUT/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A3_OUT/meta/order 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A2_OUT/meta/type 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A2_OUT/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A2_OUT/meta/order 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A1_OUT/meta/type 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A1_OUT/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A1_OUT/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-gpio/controls/A1_OUT/meta/order 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-adc/controls/Vin/meta/type 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-adc/controls/Vin/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-adc/controls/Vin/meta/order 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-adc/controls/A3/meta/type 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-adc/controls/A3/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-adc/controls/A3/meta/order 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-adc/controls/A2/meta/type 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-adc/controls/A2/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-adc/controls/A2/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-adc/controls/A2/meta/order 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-adc/controls/A1/meta/type 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-adc/controls/A1/meta/readonly 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/wb-adc/controls/A1/meta/order 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/metrics/controls/data_total_space/meta/min 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/metrics/controls/data_total_space/meta/units 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/metrics/controls/data_total_space/meta/type 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/metrics/controls/data_used_space/meta/min 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/metrics/controls/data_used_space/meta/units 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/metrics/controls/data_used_space/meta/units 2022-10-30T18:51:07.530Z [wb-mqtt-mbgate] /devices/metrics/controls/data_used_space/meta/type 2022-10-30T18:51:07.522Z [init] Started Compensation of systime in PPM from value, stored in device-tree (with opposite sign). 2022-10-30T18:51:07.520Z [avahi-daemon] Joining mDNS multicast group on interface eth0.IPv6 with address fe80::285:1ff:fe01:7643. 2022-10-30T18:51:07.517Z [wb-systime-adjust] Drift file is valid (was recently edited) 2022-10-30T18:51:07.517Z [wb-systime-adjust] Found active ntp service. Will look to /var/lib/ntp/ntp.drift 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/dev_root_linked_on/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/dev_root_total_space/meta/min 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/dev_root_total_space/meta/units 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/dev_root_total_space/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/dev_root_total_space/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/dev_root_used_space/meta/min 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/dev_root_used_space/meta/units 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/dev_root_used_space/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/swap_used/meta/min 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/swap_used/meta/units 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/swap_used/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/swap_total/meta/min 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/swap_total/meta/units 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/swap_total/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/swap_total/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/ram_total/meta/min 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/ram_total/meta/units 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/ram_total/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/ram_used/meta/min 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/ram_used/meta/units 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/ram_used/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/ram_available/meta/min 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/ram_available/meta/units 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/ram_available/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/ram_available/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/load_average_15min/meta/min 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/load_average_15min/meta/units 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/load_average_15min/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/load_average_5min/meta/min 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/load_average_5min/meta/units 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/load_average_5min/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/load_average_1min/meta/min 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/load_average_1min/meta/units 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/load_average_1min/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/metrics/controls/load_average_1min/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/alarms/controls/log/meta/readonly 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/alarms/controls/log/meta/order 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/alarms/controls/log/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/system/controls/Temperature Grade/meta/readonly 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/system/controls/Temperature Grade/meta/order 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/system/controls/Temperature Grade/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/system/controls/Short SN/meta/readonly 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/system/controls/Short SN/meta/order 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/system/controls/Short SN/meta/type 2022-10-30T18:51:07.410Z [wb-mqtt-mbgate] /devices/system/controls/Short SN/meta/type 2022-10-30T18:51:07.408Z [init] Starting Initialize Wiren Board on successful boot... 2022-10-30T18:51:07.406Z [] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode 2022-10-30T18:51:07.405Z [] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW 2022-10-30T18:51:07.388Z [] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Release suite/meta/readonly 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Release suite/meta/order 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Release suite/meta/type 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Release name/meta/order 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Release name/meta/type 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Release name/meta/type 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Release name/meta/readonly 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Reboot/meta/readonly 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Reboot/meta/order 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Reboot/meta/type 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Manufacturing Date/meta/readonly 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Manufacturing Date/meta/order 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Manufacturing Date/meta/type 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/HW Revision/meta/order 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/HW Revision/meta/type 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/HW Revision/meta/type 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/HW Revision/meta/readonly 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/DTS Version/meta/readonly 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/DTS Version/meta/order 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/DTS Version/meta/type 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Current uptime/meta/type 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Current uptime/meta/readonly 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Current uptime/meta/order 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Batch No/meta/readonly 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Batch No/meta/order 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Batch No/meta/order 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/system/controls/Batch No/meta/type 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/hwmon/controls/CPU Temperature/meta/readonly 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/hwmon/controls/CPU Temperature/meta/order 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/hwmon/controls/CPU Temperature/meta/type 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/hwmon/controls/Board Temperature/meta/readonly 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/hwmon/controls/Board Temperature/meta/order 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/hwmon/controls/Board Temperature/meta/type 2022-10-30T18:51:07.224Z [wb-mqtt-mbgate] /devices/power_status/controls/working on battery/meta/readonly 2022-10-30T18:51:07.222Z [] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found 2022-10-30T18:51:07.222Z [] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found 2022-10-30T18:51:07.220Z [] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/power_status/controls/working on battery/meta/order 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/power_status/controls/working on battery/meta/type 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/power_status/controls/Vin/meta/order 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/power_status/controls/Vin/meta/type 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/power_status/controls/Vin/meta/readonly 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/Wi-Fi IP/meta/readonly 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/Wi-Fi IP/meta/order 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/Wi-Fi IP/meta/type 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/Wi-Fi IP/meta/type 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/Wi-Fi 2 IP/meta/order 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/Wi-Fi 2 IP/meta/type 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/Wi-Fi 2 IP/meta/readonly 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/GPRS IP/meta/readonly 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/GPRS IP/meta/order 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/GPRS IP/meta/type 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/Ethernet IP/meta/readonly 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/Ethernet IP/meta/order 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/Ethernet IP/meta/type 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/Ethernet IP/meta/type 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/Ethernet 2 IP/meta/readonly 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/Ethernet 2 IP/meta/order 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/network/controls/Ethernet 2 IP/meta/type 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/buzzer/controls/volume/meta/max 2022-10-30T18:51:07.131Z [wb-mqtt-mbgate] /devices/buzzer/controls/volume/meta/type 2022-10-30T18:51:07.129Z [init] Starting Compensation of systime in PPM from value, stored in device-tree (with opposite sign)... 2022-10-30T18:51:07.105Z [wb-mqtt-mbgate] /devices/buzzer/controls/volume/meta/readonly 2022-10-30T18:51:07.105Z [wb-mqtt-mbgate] /devices/buzzer/controls/volume/meta/order 2022-10-30T18:51:07.105Z [wb-mqtt-mbgate] /devices/buzzer/controls/frequency/meta/type 2022-10-30T18:51:07.105Z [wb-mqtt-mbgate] /devices/buzzer/controls/frequency/meta/type 2022-10-30T18:51:07.105Z [wb-mqtt-mbgate] /devices/buzzer/controls/frequency/meta/readonly 2022-10-30T18:51:07.105Z [wb-mqtt-mbgate] /devices/buzzer/controls/frequency/meta/order 2022-10-30T18:51:07.105Z [wb-mqtt-mbgate] /devices/buzzer/controls/frequency/meta/max 2022-10-30T18:51:07.105Z [wb-mqtt-mbgate] /devices/buzzer/controls/enabled/meta/readonly 2022-10-30T18:51:07.105Z [wb-mqtt-mbgate] /devices/buzzer/controls/enabled/meta/order 2022-10-30T18:51:07.089Z [wb-mqtt-mbgate] /devices/buzzer/controls/enabled/meta/type 2022-10-30T18:51:07.089Z [wb-mqtt-mbgate] /devices/wbrules/controls/Rule debugging/meta/readonly 2022-10-30T18:51:07.089Z [wb-mqtt-mbgate] /devices/wbrules/controls/Rule debugging/meta/order 2022-10-30T18:51:07.085Z [wb-mqtt-mbgate] /devices/wbrules/controls/Rule debugging/meta/type 2022-10-30T18:51:07.085Z [wb-mqtt-mbgate] /devices/wbrules/controls/Rule debugging/meta/type 2022-10-30T18:51:07.085Z [wb-mqtt-mbgate] /devices/knx/controls/data/meta/type 2022-10-30T18:51:07.084Z [wb-mqtt-mbgate] /devices/knx/controls/data/meta/readonly 2022-10-30T18:51:07.080Z [init] Reached target Host and Network Name Lookups. 2022-10-30T18:51:07.071Z [wb-mqtt-mbgate] /devices/knx/controls/data/meta/order 2022-10-30T18:51:07.068Z [ntp] Listening on routing socket on fd #21 for interface updates 2022-10-30T18:51:07.065Z [ntp] failed to init interface for address fe80::285:1ff:fe01:7643%3 2022-10-30T18:51:07.053Z [ntp] unable to create socket on eth0 (5) for fe80::285:1ff:fe01:7643%3#123 2022-10-30T18:51:07.051Z [ntp] bind(21) AF_INET6 fe80::285:1ff:fe01:7643%3#123 flags 0x11 failed: Cannot assign requested address 2022-10-30T18:51:07.049Z [init] Started dnsmasq - A lightweight DHCP and caching DNS server. 2022-10-30T18:51:07.049Z [init] Started dnsmasq - A lightweight DHCP and caching DNS server. 2022-10-30T18:51:07.047Z [ntp] Listen normally on 4 lo [::1]:123 2022-10-30T18:51:07.046Z [ntp] Listen normally on 3 eth0 192.168.100.200:123 2022-10-30T18:51:07.043Z [ntp] Listen normally on 2 lo 127.0.0.1:123 2022-10-30T18:51:07.040Z [ntp] Listen and drop on 1 v4wildcard 0.0.0.0:123 2022-10-30T18:51:07.038Z [ntp] Listen and drop on 0 v6wildcard [::]:123 2022-10-30T18:51:07.032Z [ntp] proto: precision = 0.875 usec (-20) 2022-10-30T18:51:07.017Z [init] Started LSB: Start NTP daemon. 2022-10-30T18:51:06.993Z [ntp] Starting NTP server: ntpd. 2022-10-30T18:51:06.990Z [] Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 101:103 2022-10-30T18:51:06.990Z [] Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 101:103 2022-10-30T18:51:06.989Z [] ntpd 4.2.8p10@1.3728-o Sat Feb 24 11:31:31 UTC 2018 (1): Starting 2022-10-30T18:51:06.987Z [init] Started A high performance web server and a reverse proxy server. 2022-10-30T18:51:06.986Z [] process '/sbin/netplugd' started with executable stack 2022-10-30T18:51:06.962Z [init] Started LSB: Advanced IEEE 802.11 management daemon. 2022-10-30T18:51:06.946Z [hostapd] Starting advanced IEEE 802.11 management: hostapd failed! 2022-10-30T18:51:06.602Z [init] networking.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:51:06.583Z [dnsmasq] read /etc/hosts - 6 addresses 2022-10-30T18:51:06.581Z [dnsmasq] using nameserver 192.168.0.1#53 2022-10-30T18:51:06.578Z [dnsmasq] reading /etc/resolv.conf 2022-10-30T18:51:06.578Z [dnsmasq] reading /etc/resolv.conf 2022-10-30T18:51:06.569Z [init] Starting LSB: Brings up/down network automatically... 2022-10-30T18:51:06.567Z [dnsmasq] DHCP, IP range 192.168.42.50 -- 192.168.42.150, lease time 12h 2022-10-30T18:51:06.562Z [dnsmasq] compile time options: IPv6 GNU-getopt DBus i18n IDN DHCP DHCPv6 no-Lua TFTP conntrack ipset auth DNSSEC loop-detect inotify 2022-10-30T18:51:06.559Z [dnsmasq] started, version 2.76 cachesize 150 2022-10-30T18:51:06.539Z [init] Starting LSB: Start NTP daemon... 2022-10-30T18:51:06.499Z [init] Starting LSB: Advanced IEEE 802.11 management daemon... 2022-10-30T18:51:06.467Z [init] Reached target Network is Online. 2022-10-30T18:51:06.447Z [init] Reached target Login Prompts. 2022-10-30T18:51:06.443Z [avahi-daemon] Server startup complete. Host name is wirenboard-AUCNYTO.local. Local service cookie is 1472691645. 2022-10-30T18:51:06.443Z [avahi-daemon] Server startup complete. Host name is wirenboard-AUCNYTO.local. Local service cookie is 1472691645. 2022-10-30T18:51:06.436Z [wb-mqtt-opcua] INFO: [OPCUA] network: TCP network layer listening on opc.tcp://wirenboard-AUCNYTO:4840/ 2022-10-30T18:51:06.415Z [wb-mqtt-opcua] INFO: [OPCUA] server: AccessControl: Anonymous login is enabled 2022-10-30T18:51:06.415Z [wb-mqtt-opcua] WARNING: [OPCUA] server: AccessControl: Unconfigured AccessControl. Users have all permissions. 2022-10-30T18:51:06.415Z [wb-mqtt-opcua] WARNING: [OPCUA] userland: AcceptAll Certificate Verification. Any remote certificate will be accepted. 2022-10-30T18:51:06.409Z [init] Started Getty on tty1. 2022-10-30T18:51:06.397Z [wb-mqtt-opcua] INFO: [mqtt] subscription succeeded (message id 5) 2022-10-30T18:51:06.394Z [] RTL871X: nolinked power save enter 2022-10-30T18:51:06.369Z [init] Started Serial Getty on ttyS0. 2022-10-30T18:51:06.334Z [wb-mqtt-opcua] INFO: [mqtt] subscription succeeded (message id 2) 2022-10-30T18:51:06.334Z [wb-mqtt-opcua] INFO: [mqtt] subscription succeeded (message id 2) 2022-10-30T18:51:06.327Z [wb-mqtt-opcua] INFO: [mqtt] subscription succeeded (message id 1) 2022-10-30T18:51:06.327Z [wb-mqtt-opcua] INFO: [mqtt] connection estabilished with code "0" 2022-10-30T18:51:06.235Z [wb-mqtt-opcua] INFO: [mqtt] UNIX socket not found, falling back to TCP connection 2022-10-30T18:51:06.231Z [wb-mqtt-opcua] INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock 2022-10-30T18:51:06.198Z [wb-mqtt-opcua] wb-mqtt-opcua 1.0.4 git 337220620ea76135896f80c9640e7b51ee607cea 2022-10-30T18:51:06.147Z [init] Started Wiren Board MQTT to OPC UA gateway. 2022-10-30T18:51:06.111Z [ifup@wlan0] wlan0=wlan0 2022-10-30T18:51:06.109Z [init] Started Hostname Service. 2022-10-30T18:51:06.087Z [wb-mqtt-opcua] INFO: [mqtt] subscription succeeded (message id 10) 2022-10-30T18:51:06.087Z [wb-mqtt-opcua] INFO: [mqtt] subscription succeeded (message id 10) 2022-10-30T18:51:06.077Z [wb-mqtt-opcua] INFO: [mqtt] subscription succeeded (message id 9) 2022-10-30T18:51:06.075Z [init] Started OpenBSD Secure Shell server. 2022-10-30T18:51:06.075Z [init] Started OpenBSD Secure Shell server. 2022-10-30T18:51:06.056Z [ssh] Server listening on :: port 22. 2022-10-30T18:51:06.054Z [ssh] Server listening on 0.0.0.0 port 22. 2022-10-30T18:51:06.002Z [init] Started Avahi mDNS/DNS-SD Stack. 2022-10-30T18:51:05.988Z [ssh] /etc/ssh/sshd_config line 37: Deprecated option RhostsRSAAuthentication 2022-10-30T18:51:05.988Z [ssh] /etc/ssh/sshd_config line 30: Deprecated option RSAAuthentication 2022-10-30T18:51:05.988Z [ssh] /etc/ssh/sshd_config line 19: Deprecated option ServerKeyBits 2022-10-30T18:51:05.988Z [ssh] /etc/ssh/sshd_config line 18: Deprecated option KeyRegenerationInterval 2022-10-30T18:51:05.964Z [wb-mqtt-opcua] INFO: [mqtt] subscription succeeded (message id 8) 2022-10-30T18:51:05.950Z [wb-mqtt-opcua] INFO: [mqtt] subscription succeeded (message id 7) 2022-10-30T18:51:05.950Z [wb-mqtt-opcua] INFO: [mqtt] subscription succeeded (message id 7) 2022-10-30T18:51:05.944Z [init] Started Permit User Sessions. 2022-10-30T18:51:05.938Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:51:05.934Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:51:05.919Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:51:05.909Z [wb-mqtt-opcua] INFO: [mqtt] subscription succeeded (message id 6) 2022-10-30T18:51:05.905Z [wb-mqtt-opcua] INFO: [mqtt] subscription succeeded (message id 5) 2022-10-30T18:51:05.875Z [wb-mqtt-opcua] INFO: [mqtt] subscription succeeded (message id 2) 2022-10-30T18:51:05.875Z [wb-mqtt-opcua] INFO: [mqtt] subscription succeeded (message id 1) 2022-10-30T18:51:05.872Z [wb-mqtt-opcua] INFO: [mqtt] connection estabilished with code "0" 2022-10-30T18:51:05.872Z [wb-mqtt-opcua] INFO: [mqtt] connection estabilished with code "0" 2022-10-30T18:51:05.856Z [init] Started KNX Daemon. 2022-10-30T18:51:05.842Z [wb-watch-update] Warning: Unable to locate configuration directory, default config not loaded. 2022-10-30T18:51:05.804Z [dbus] [system] Successfully activated service 'org.freedesktop.hostname1' 2022-10-30T18:51:05.795Z [wb-mqtt-opcua] INFO: [mqtt] UNIX socket not found, falling back to TCP connection 2022-10-30T18:51:05.792Z [wb-mqtt-opcua] INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock 2022-10-30T18:51:05.751Z [] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 2022-10-30T18:51:05.749Z [] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off 2022-10-30T18:51:05.676Z [wb-mqtt-logs] INFO: [mqtt] UNIX socket not found, falling back to TCP connection 2022-10-30T18:51:05.676Z [wb-mqtt-logs] INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock 2022-10-30T18:51:05.676Z [wb-mqtt-logs] INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock 2022-10-30T18:51:05.673Z [wb-mqtt-logs] MQTT broker localhost:1883 2022-10-30T18:51:05.661Z [init] Started Wiren Board firmware update service. 2022-10-30T18:51:05.641Z [avahi-daemon] Registering new address record for 192.168.100.200 on eth0.IPv4. 2022-10-30T18:51:05.638Z [init] Starting Wiren Board MQTT to OPC UA gateway... 2022-10-30T18:51:05.636Z [networking] ifup: failed to bring up eth0 2022-10-30T18:51:05.623Z [avahi-daemon] Registering new address record for 192.168.42.1 on wlan0.IPv4. 2022-10-30T18:51:05.616Z [init] Started Wiren Board configuration editor backend. 2022-10-30T18:51:05.603Z [networking] RTNETLINK answers: Invalid argument 2022-10-30T18:51:05.601Z [avahi-daemon] Network interface enumeration completed. 2022-10-30T18:51:05.601Z [avahi-daemon] Network interface enumeration completed. 2022-10-30T18:51:05.588Z [avahi-daemon] New relevant interface eth0.IPv4 for mDNS. 2022-10-30T18:51:05.582Z [avahi-daemon] Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.100.200. 2022-10-30T18:51:05.580Z [avahi-daemon] New relevant interface wlan0.IPv4 for mDNS. 2022-10-30T18:51:05.578Z [avahi-daemon] Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.42.1. 2022-10-30T18:51:05.577Z [knxd] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:51:05.574Z [knxd] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:51:05.561Z [init] Starting Wiren Board MQTT to Modbus TCP gateway... 2022-10-30T18:51:05.520Z [init] Started Wiren Board journald to MQTT gateway. 2022-10-30T18:51:05.489Z [init] Started zigbee2mqtt. 2022-10-30T18:51:05.489Z [init] Started zigbee2mqtt. 2022-10-30T18:51:05.464Z [init] Starting Permit User Sessions... 2022-10-30T18:51:05.458Z [ssh] /etc/ssh/sshd_config line 37: Deprecated option RhostsRSAAuthentication 2022-10-30T18:51:05.458Z [ssh] /etc/ssh/sshd_config line 30: Deprecated option RSAAuthentication 2022-10-30T18:51:05.458Z [ssh] /etc/ssh/sshd_config line 19: Deprecated option ServerKeyBits 2022-10-30T18:51:05.458Z [ssh] /etc/ssh/sshd_config line 18: Deprecated option KeyRegenerationInterval 2022-10-30T18:51:05.419Z [init] Starting A high performance web server and a reverse proxy server... 2022-10-30T18:51:05.391Z [init] Starting KNX Daemon... 2022-10-30T18:51:05.365Z [dnsmasq] dnsmasq: syntax check OK. 2022-10-30T18:51:05.362Z [init] Starting OpenBSD Secure Shell server... 2022-10-30T18:51:05.362Z [init] Starting OpenBSD Secure Shell server... 2022-10-30T18:51:05.335Z [avahi-daemon] No service file found in /etc/avahi/services. 2022-10-30T18:51:05.332Z [avahi-daemon] Successfully dropped remaining capabilities. 2022-10-30T18:51:05.329Z [avahi-daemon] Successfully called chroot(). 2022-10-30T18:51:05.321Z [init] Starting dnsmasq - A lightweight DHCP and caching DNS server... 2022-10-30T18:51:05.317Z [avahi-daemon] avahi-daemon 0.6.32 starting up. 2022-10-30T18:51:05.315Z [avahi-daemon] Successfully dropped root privileges. 2022-10-30T18:51:05.313Z [avahi-daemon] Found user 'avahi' (UID 109) and group 'avahi' (GID 113). 2022-10-30T18:51:05.285Z [init] Reached target Network. 2022-10-30T18:51:05.260Z [init] Starting Avahi mDNS/DNS-SD Stack... 2022-10-30T18:51:05.260Z [init] Starting Avahi mDNS/DNS-SD Stack... 2022-10-30T18:51:05.223Z [init] Starting Hostname Service... 2022-10-30T18:51:05.180Z [init] Started Login Service. 2022-10-30T18:51:05.110Z [init] Started initialize filesystems at first boot. 2022-10-30T18:51:05.101Z [systemd-logind] New seat seat0. 2022-10-30T18:51:04.927Z [init] Started Mosquitto MQTT v3.1/v3.1.1 Broker. 2022-10-30T18:51:04.893Z [init] Started Restore /etc/resolv.conf if the system crashed before the ppp link was shut down. 2022-10-30T18:51:04.843Z [init] Started System Logging Service. 2022-10-30T18:51:04.818Z [bluetooth] sap-server: Operation not permitted (1) 2022-10-30T18:51:04.816Z [bluetooth] Sap driver initialization failed. 2022-10-30T18:51:04.816Z [bluetooth] Sap driver initialization failed. 2022-10-30T18:51:04.812Z [dbus] [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' 2022-10-30T18:51:04.810Z [bluetooth] Failed to obtain handles for "Service Changed" characteristic 2022-10-30T18:51:04.807Z [bluetooth] Bluetooth management interface 1.18 initialized 2022-10-30T18:51:04.799Z [init] Started Generates wb-mqtt-serial UI schema for wb-mqtt-confed. 2022-10-30T18:51:04.786Z [] Bluetooth: BNEP socket layer initialized 2022-10-30T18:51:04.786Z [] Bluetooth: BNEP filters: protocol multicast 2022-10-30T18:51:04.785Z [] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 2022-10-30T18:51:04.765Z [init] Reached target Bluetooth. 2022-10-30T18:51:04.764Z [] no servers can be used, exiting 2022-10-30T18:51:04.764Z [] no servers can be used, exiting 2022-10-30T18:51:04.763Z [] Can't find host 3.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:51:04.762Z [] Can't find host 2.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:51:04.761Z [] Can't find host 1.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:51:04.759Z [ifup@wlan0] Can't find host 0.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:51:04.742Z [bluetooth] Starting SDP server 2022-10-30T18:51:04.736Z [init] Started Bluetooth service. 2022-10-30T18:51:04.637Z [bluetooth] Bluetooth daemon 5.43 2022-10-30T18:51:04.611Z [ifup@wlan0] pam_unix(sudo:session): session closed for user avahi 2022-10-30T18:51:04.604Z [] Cannot open mail:25 2022-10-30T18:51:04.604Z [] Cannot open mail:25 2022-10-30T18:51:04.602Z [] Unable to locate mail 2022-10-30T18:51:04.601Z [] new mount options do not match the existing superblock, will be ignored 2022-10-30T18:51:04.593Z [init] Started D-Bus System Message Bus. 2022-10-30T18:51:04.591Z [] Cannot open mail:25 2022-10-30T18:51:04.582Z [ifup@wlan0] Unable to locate mail 2022-10-30T18:51:04.538Z [init] Starting Login Service... 2022-10-30T18:51:04.528Z [ifup@wlan0] pam_unix(sudo:session): session opened for user avahi by (uid=0) 2022-10-30T18:51:04.500Z [init] Started Cgroup management daemon. 2022-10-30T18:51:04.479Z [ifup@wlan0] root : TTY=unknown ; PWD=/ ; USER=avahi ; GROUP=avahi ; COMMAND=/usr/lib/avahi/avahi-daemon-check-dns.sh 2022-10-30T18:51:04.479Z [ifup@wlan0] root : TTY=unknown ; PWD=/ ; USER=avahi ; GROUP=avahi ; COMMAND=/usr/lib/avahi/avahi-daemon-check-dns.sh 2022-10-30T18:51:04.470Z [init] Starting Bluetooth service... 2022-10-30T18:51:04.444Z [init] Starting Mosquitto MQTT v3.1/v3.1.1 Broker... 2022-10-30T18:51:04.437Z [ifup@wlan0] root : problem with defaults entries ; TTY=unknown ; PWD=/ ; USER=avahi ; GROUP=avahi ; 2022-10-30T18:51:04.432Z [ifup@wlan0] sudo: unable to resolve host wirenboard-AUCNYTO: No such file or directory 2022-10-30T18:51:04.429Z [ifup@wlan0] root : unable to resolve host wirenboard-AUCNYTO 2022-10-30T18:51:04.399Z [init] Starting initialize filesystems at first boot... 2022-10-30T18:51:04.360Z [init] Starting Restore local date from Wiren Board GSM RTC... 2022-10-30T18:51:04.319Z [init] Starting Restore /etc/resolv.conf if the system crashed before the ppp link was shut down... 2022-10-30T18:51:04.316Z [] Watched dirs: /etc /etc/network 2022-10-30T18:51:04.316Z [] Watched dirs: /etc /etc/network 2022-10-30T18:51:04.279Z [init] Starting Initialize Wiren Board Device Tree overlays... 2022-10-30T18:51:04.265Z [cron] (CRON) INFO (Running @reboot jobs) 2022-10-30T18:51:04.256Z [cron] (CRON) INFO (pidfile fd = 3) 2022-10-30T18:51:04.246Z [rsyslog] [origin software="rsyslogd" swVersion="8.24.0" x-pid="684" x-info="http://www.rsyslog.com"] start 2022-10-30T18:51:04.246Z [rsyslog] [origin software="rsyslogd" swVersion="8.24.0" x-pid="684" x-info="http://www.rsyslog.com"] start 2022-10-30T18:51:04.243Z [init] Started Regular background program processing daemon. 2022-10-30T18:51:04.209Z [init] Started watch config files. 2022-10-30T18:51:04.179Z [init] Starting System Logging Service... 2022-10-30T18:51:04.144Z [init] Reached target Basic System. 2022-10-30T18:51:04.114Z [init] Reached target Paths. 2022-10-30T18:51:04.080Z [init] Started Monitor directories with device templates for wb-mqtt-serial. 2022-10-30T18:51:04.032Z [init] Reached target Timers. 2022-10-30T18:51:04.025Z [init] Started Daily Cleanup of Temporary Directories. 2022-10-30T18:51:03.996Z [init] Reached target Sockets. 2022-10-30T18:51:03.996Z [init] Reached target Sockets. 2022-10-30T18:51:03.965Z [init] Listening on D-Bus System Message Bus Socket. 2022-10-30T18:51:03.937Z [init] Started Daily apt upgrade and clean activities. 2022-10-30T18:51:03.935Z [init] apt-daily-upgrade.timer: Adding 34min 43.621562s random time. 2022-10-30T18:51:03.911Z [init] Started Daily apt download activities. 2022-10-30T18:51:03.909Z [init] apt-daily.timer: Adding 5h 15min 52.609826s random time. 2022-10-30T18:51:03.875Z [init] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. 2022-10-30T18:51:03.845Z [init] Listening on KNX Daemon (socket). 2022-10-30T18:51:03.810Z [init] Reached target System Initialization. 2022-10-30T18:51:03.776Z [init] Started Update UTMP about System Boot/Shutdown. 2022-10-30T18:51:03.776Z [init] Started Update UTMP about System Boot/Shutdown. 2022-10-30T18:51:03.709Z [init] Starting Update UTMP about System Boot/Shutdown... 2022-10-30T18:51:03.681Z [init] Reached target System Time Synchronized. 2022-10-30T18:51:03.639Z [init] Started Create Volatile Files and Directories. 2022-10-30T18:51:03.636Z [] NORMAL 2022-10-30T18:51:03.636Z [] RTL871X: RTW_ADAPTIVITY_MODE_ 2022-10-30T18:51:03.636Z [] AUTO, chplan:0x20, Regulation:3,3 2022-10-30T18:51:03.635Z [] RTL871X: RTW_ADAPTIVITY_EN_ 2022-10-30T18:51:03.623Z [systemd-tmpfiles-setup] Cannot set file attribute for '/var/log/journal/6887e05d4e7d1e3205cf887b631b581d', value=0x00800000, mask=0x00800000: Operation not supported 2022-10-30T18:51:03.620Z [systemd-tmpfiles-setup] Cannot set file attribute for '/var/log/journal', value=0x00800000, mask=0x00800000: Operation not supported 2022-10-30T18:51:03.620Z [systemd-tmpfiles-setup] Cannot set file attribute for '/var/log/journal', value=0x00800000, mask=0x00800000: Operation not supported 2022-10-30T18:51:03.571Z [init] Starting Create Volatile Files and Directories... 2022-10-30T18:51:03.528Z [init] Started prepare mounts and symlinks to config files. 2022-10-30T18:51:03.102Z [init] Started Flush Journal to Persistent Storage. 2022-10-30T18:51:02.840Z [systemd-journald] System journal (/var/log/journal/6887e05d4e7d1e3205cf887b631b581d) is 296.0M, max 475.2M, 179.1M free. 2022-10-30T18:51:02.840Z [systemd-journald] Time spent on flushing to /var is 63.464ms for 396 entries. 2022-10-30T18:51:02.799Z [init] Started Raise network interfaces. 2022-10-30T18:51:02.741Z [init] Starting Raise network interfaces... 2022-10-30T18:51:02.732Z [wb-configs-early] Checking symlinks to /mnt/data 2022-10-30T18:51:02.699Z [init] Starting prepare mounts and symlinks to config files... 2022-10-30T18:51:02.699Z [init] Starting prepare mounts and symlinks to config files... 2022-10-30T18:51:02.668Z [init] Started ifup for wlan0. 2022-10-30T18:51:02.638Z [init] Started ifup for eth1. 2022-10-30T18:51:02.604Z [init] Reached target Local File Systems. 2022-10-30T18:51:02.579Z [init] Starting Flush Journal to Persistent Storage... 2022-10-30T18:51:02.545Z [init] Started Load/Save RF Kill Switch Status. 2022-10-30T18:51:02.519Z [init] Mounted /var/log. 2022-10-30T18:51:02.491Z [init] Mounting /var/log... 2022-10-30T18:51:02.485Z [init] var-log.mount: Directory /var/log to mount over is not empty, mounting anyway. 2022-10-30T18:51:02.459Z [init] Starting Load/Save RF Kill Switch Status... 2022-10-30T18:51:02.459Z [init] Starting Load/Save RF Kill Switch Status... 2022-10-30T18:51:02.433Z [init] Mounted /mnt/data. 2022-10-30T18:51:02.424Z [] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) 2022-10-30T18:51:02.394Z [init] Reached target Swap. 2022-10-30T18:51:02.363Z [init] Mounting /mnt/data... 2022-10-30T18:51:02.319Z [init] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. 2022-10-30T18:51:01.909Z [init] Started File System Check on /dev/mmcblk0p6. 2022-10-30T18:51:01.897Z [systemd-fsck@dev-mmcblk0p6] data: clean, 18337/313248 files, 240942/1252608 blocks 2022-10-30T18:51:01.695Z [] usbcore: registered new interface driver rtl8xxxu 2022-10-30T18:51:01.695Z [] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 2022-10-30T18:51:01.695Z [] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 2022-10-30T18:51:01.603Z [] RTL871X: module init ret=0 2022-10-30T18:51:01.603Z [] usbcore: registered new interface driver rtl8723bu 2022-10-30T18:51:01.603Z [] RTL871X: rtw_ndev_init(wlan1) 2022-10-30T18:51:01.602Z [] RTL871X: rtw_ndev_init(wlan0) 2022-10-30T18:51:01.441Z [systemd-fsck@dev-mmcblk0p6] data: recovering journal 2022-10-30T18:51:01.418Z [init] Activated swap /dev/mmcblk0p5. 2022-10-30T18:51:01.366Z [] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 2022-10-30T18:51:01.366Z [] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 2022-10-30T18:51:01.365Z [] RTL871X: module init start 2022-10-30T18:51:01.365Z [] RTL871X: module init start 2022-10-30T18:51:01.344Z [] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SS 2022-10-30T18:51:01.344Z [] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SS 2022-10-30T18:51:01.170Z [init] Activating swap /dev/mmcblk0p5... 2022-10-30T18:51:01.133Z [init] Starting File System Check on /dev/mmcblk0p6... 2022-10-30T18:51:00.996Z [init] Found device /dev/mmcblk0p6. 2022-10-30T18:51:00.849Z [] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 2022-10-30T18:51:00.847Z [] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 2022-10-30T18:51:00.846Z [] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin 2022-10-30T18:51:00.825Z [] cfg80211: failed to load regulatory.db 2022-10-30T18:51:00.824Z [] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 2022-10-30T18:51:00.824Z [] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' 2022-10-30T18:51:00.824Z [] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' 2022-10-30T18:51:00.809Z [init] Found device /dev/mmcblk0p5. 2022-10-30T18:51:00.808Z [] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin 2022-10-30T18:51:00.808Z [] Bluetooth: hci0: RTL: rom_version status=0 version=1 2022-10-30T18:51:00.807Z [] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 2022-10-30T18:51:00.784Z [] usbcore: registered new interface driver btusb 2022-10-30T18:51:00.758Z [systemd-udevd] Could not set offload features of eth1: Device or resource busy 2022-10-30T18:51:00.756Z [systemd-udevd] link_config: could not get ethtool features for eth1 2022-10-30T18:51:00.727Z [] Bluetooth: SCO socket layer initialized 2022-10-30T18:51:00.726Z [] Bluetooth: L2CAP socket layer initialized 2022-10-30T18:51:00.726Z [] Bluetooth: L2CAP socket layer initialized 2022-10-30T18:51:00.717Z [] Bluetooth: HCI socket layer initialized 2022-10-30T18:51:00.717Z [] Bluetooth: HCI device and connection manager initialized 2022-10-30T18:51:00.716Z [] NET: Registered protocol family 31 2022-10-30T18:51:00.704Z [] Bluetooth: Core ver 2.22 2022-10-30T18:51:00.704Z [] cfg80211: Loading compiled-in X.509 certificates for regulatory database 2022-10-30T18:51:00.664Z [] usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, using dummy regulator 2022-10-30T18:51:00.617Z [init] Found device /dev/ttyS0. 2022-10-30T18:51:00.489Z [init] Started udev Coldplug all Devices. 2022-10-30T18:51:00.444Z [] Driver for 1-wire Dallas network protocol. 2022-10-30T18:51:00.444Z [] Driver for 1-wire Dallas network protocol. 2022-10-30T18:51:00.027Z [init] Reached target Local File Systems (Pre). 2022-10-30T18:51:00.001Z [init] Started prepare partitions at first boot. 2022-10-30T18:50:59.997Z [wb-repart] Partition table is good. 2022-10-30T18:50:59.836Z [init] Started Load/Save Random Seed. 2022-10-30T18:50:59.809Z [init] Started udev Kernel Device Manager. 2022-10-30T18:50:59.778Z [init] Starting prepare partitions at first boot... 2022-10-30T18:50:59.750Z [init] Starting udev Coldplug all Devices... 2022-10-30T18:50:59.718Z [init] Starting Load/Save Random Seed... 2022-10-30T18:50:59.692Z [init] Starting udev Kernel Device Manager... 2022-10-30T18:50:59.692Z [init] Starting udev Kernel Device Manager... 2022-10-30T18:50:59.656Z [init] Started Create Static Device Nodes in /dev. 2022-10-30T18:50:59.626Z [init] Started Apply Kernel Variables. 2022-10-30T18:50:59.592Z [init] Started Remount Root and Kernel File Systems. 2022-10-30T18:50:59.559Z [init] Starting Create Static Device Nodes in /dev... 2022-10-30T18:50:59.544Z [] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro 2022-10-30T18:50:59.529Z [init] Starting Apply Kernel Variables... 2022-10-30T18:50:59.498Z [init] Starting Remount Root and Kernel File Systems... 2022-10-30T18:50:59.463Z [init] Started File System Check Daemon to report status. 2022-10-30T18:50:59.425Z [init] Started File System Check on Root Device. 2022-10-30T18:50:59.425Z [init] Started File System Check on Root Device. 2022-10-30T18:50:59.396Z [init] Started Load Kernel Modules. 2022-10-30T18:50:59.361Z [init] Started Create list of required static device nodes for the current kernel. 2022-10-30T18:50:59.214Z [systemd-fsck-root] rootfs2: clean, 30422/65536 files, 159668/262144 blocks 2022-10-30T18:50:59.211Z [systemd-journald] Runtime journal (/run/log/journal/6887e05d4e7d1e3205cf887b631b581d) is 6.2M, max 49.9M, 43.7M free. 2022-10-30T18:50:59.210Z [systemd-journald] Journal started 2022-10-30T18:50:59.210Z [] Created slice System Slice. 2022-10-30T18:50:59.209Z [] Listening on Journal Socket. 2022-10-30T18:50:59.209Z [] Listening on Syslog Socket. 2022-10-30T18:50:59.209Z [] Listening on udev Control Socket. 2022-10-30T18:50:59.209Z [] Listening on udev Control Socket. 2022-10-30T18:50:59.209Z [] Listening on udev Kernel Socket. 2022-10-30T18:50:59.209Z [] Created slice User and Session Slice. 2022-10-30T18:50:59.209Z [] [/lib/systemd/system/wb-mqtt-w1.service:10] Unknown lvalue 'StartLimitIntervalSec' in section 'Service' 2022-10-30T18:50:59.209Z [] random: systemd-cryptse: uninitialized urandom read (16 bytes read) 2022-10-30T18:50:59.209Z [] random: systemd: uninitialized urandom read (16 bytes read) 2022-10-30T18:50:59.208Z [] Set hostname to . 2022-10-30T18:50:59.208Z [] Detected architecture arm. 2022-10-30T18:50:59.208Z [] systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) 2022-10-30T18:50:59.208Z [] random: systemd: uninitialized urandom read (16 bytes read) 2022-10-30T18:50:59.208Z [] random: systemd: uninitialized urandom read (16 bytes read) 2022-10-30T18:50:59.208Z [] TERM=linux 2022-10-30T18:50:59.208Z [] HOME=/ 2022-10-30T18:50:59.208Z [] with environment: 2022-10-30T18:50:59.208Z [] /sbin/init 2022-10-30T18:50:59.207Z [] with arguments: 2022-10-30T18:50:59.207Z [] Run /sbin/init as init process 2022-10-30T18:50:59.207Z [] Freeing unused kernel memory: 1024K 2022-10-30T18:50:59.207Z [] devtmpfs: mounted 2022-10-30T18:50:59.207Z [] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. 2022-10-30T18:50:59.207Z [] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. 2022-10-30T18:50:59.207Z [] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) 2022-10-30T18:50:59.207Z [] EXT4-fs (mmcblk0p3): recovery complete 2022-10-30T18:50:59.207Z [] EXT4-fs (mmcblk0p3): write access will be enabled during recovery 2022-10-30T18:50:59.206Z [] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem 2022-10-30T18:50:59.206Z [] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode 2022-10-30T18:50:59.206Z [] No soundcards found. 2022-10-30T18:50:59.206Z [] ALSA device list: 2022-10-30T18:50:59.205Z [] of_cfs_init: OK 2022-10-30T18:50:59.205Z [] sunxi-mmc 1c0f000.mmc: Got CD GPIO 2022-10-30T18:50:59.205Z [] sunxi-mmc 1c0f000.mmc: Got CD GPIO 2022-10-30T18:50:59.204Z [] of_cfs_init 2022-10-30T18:50:59.204Z [] hub 6-0:1.0: 1 port detected 2022-10-30T18:50:59.203Z [] hub 6-0:1.0: USB hub found 2022-10-30T18:50:59.203Z [] ohci-platform 1c1c400.usb: irq 42, io mem 0x01c1c400 2022-10-30T18:50:59.202Z [] usb 2-1: new high-speed USB device number 2 using ehci-platform 2022-10-30T18:50:59.201Z [] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 2022-10-30T18:50:59.201Z [] ohci-platform 1c1c400.usb: Generic Platform OHCI controller 2022-10-30T18:50:59.200Z [] hub 5-0:1.0: 1 port detected 2022-10-30T18:50:59.199Z [] hub 5-0:1.0: USB hub found 2022-10-30T18:50:59.199Z [] hub 5-0:1.0: USB hub found 2022-10-30T18:50:59.199Z [] ohci-platform 1c19400.usb: irq 40, io mem 0x01c19400 2022-10-30T18:50:59.198Z [] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 2022-10-30T18:50:59.197Z [] ohci-platform 1c19400.usb: Generic Platform OHCI controller 2022-10-30T18:50:59.197Z [] hub 4-0:1.0: 1 port detected 2022-10-30T18:50:59.196Z [] hub 4-0:1.0: USB hub found 2022-10-30T18:50:59.195Z [] ohci-platform 1c14400.usb: irq 38, io mem 0x01c14400 2022-10-30T18:50:59.193Z [] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 2022-10-30T18:50:59.193Z [] ohci-platform 1c14400.usb: Generic Platform OHCI controller 2022-10-30T18:50:59.192Z [] hub 3-0:1.0: 1 port detected 2022-10-30T18:50:59.192Z [] hub 3-0:1.0: 1 port detected 2022-10-30T18:50:59.191Z [] hub 3-0:1.0: USB hub found 2022-10-30T18:50:59.191Z [] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 2022-10-30T18:50:59.190Z [] ehci-platform 1c1c000.usb: irq 41, io mem 0x01c1c000 2022-10-30T18:50:59.190Z [] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 2022-10-30T18:50:59.189Z [] ehci-platform 1c1c000.usb: EHCI Host Controller 2022-10-30T18:50:59.188Z [] hub 2-0:1.0: 1 port detected 2022-10-30T18:50:59.188Z [] hub 2-0:1.0: USB hub found 2022-10-30T18:50:59.187Z [] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 2022-10-30T18:50:59.186Z [] ehci-platform 1c19000.usb: irq 39, io mem 0x01c19000 2022-10-30T18:50:59.186Z [] ehci-platform 1c19000.usb: irq 39, io mem 0x01c19000 2022-10-30T18:50:59.186Z [] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 2022-10-30T18:50:59.185Z [] ehci-platform 1c19000.usb: EHCI Host Controller 2022-10-30T18:50:59.184Z [] hub 1-0:1.0: 1 port detected 2022-10-30T18:50:59.183Z [] hub 1-0:1.0: USB hub found 2022-10-30T18:50:59.183Z [] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 2022-10-30T18:50:59.182Z [] ehci-platform 1c14000.usb: irq 37, io mem 0x01c14000 2022-10-30T18:50:59.181Z [] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 2022-10-30T18:50:59.181Z [] ehci-platform 1c14000.usb: EHCI Host Controller 2022-10-30T18:50:59.180Z [] mmcblk0: p1 p2 p3 p4 < p5 p6 > 2022-10-30T18:50:59.180Z [] mmcblk0: p1 p2 p3 p4 < p5 p6 > 2022-10-30T18:50:59.180Z [] libphy: stmmac: probed 2022-10-30T18:50:59.180Z [] dwmac-sun8i 1c50000.ethernet: Chain mode enabled 2022-10-30T18:50:59.179Z [] dwmac-sun8i 1c50000.ethernet: Normal descriptors 2022-10-30T18:50:59.179Z [] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported 2022-10-30T18:50:59.178Z [] mmcblk0rpmb: mmc0:0001 AS08FC partition 3 4.00 MiB, chardev (246:0) 2022-10-30T18:50:59.178Z [] dwmac-sun8i 1c50000.ethernet: COE Type 2 2022-10-30T18:50:59.177Z [] mmcblk0boot1: mmc0:0001 AS08FC partition 2 4.00 MiB 2022-10-30T18:50:59.177Z [] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported 2022-10-30T18:50:59.177Z [] mmcblk0boot0: mmc0:0001 AS08FC partition 1 4.00 MiB 2022-10-30T18:50:59.177Z [] mmcblk0boot0: mmc0:0001 AS08FC partition 1 4.00 MiB 2022-10-30T18:50:59.176Z [] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported 2022-10-30T18:50:59.176Z [] mmcblk0: mmc0:0001 AS08FC 7.05 GiB 2022-10-30T18:50:59.176Z [] dwmac-sun8i 1c50000.ethernet: PTP uses main clock 2022-10-30T18:50:59.175Z [] mmc0: new DDR MMC card at address 0001 2022-10-30T18:50:59.175Z [] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found 2022-10-30T18:50:59.174Z [] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found 2022-10-30T18:50:59.173Z [] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 65 MAC: 00:85:01:01:76:43 2022-10-30T18:50:59.173Z [] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode 2022-10-30T18:50:59.172Z [] libphy: sun4i_mii_bus: probed 2022-10-30T18:50:59.172Z [] libphy: sun4i_mii_bus: probed 2022-10-30T18:50:59.172Z [] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator 2022-10-30T18:50:59.171Z [] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 53, base_baud = 1500000) is a Allwinner sun4i 2022-10-30T18:50:59.171Z [] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 2022-10-30T18:50:59.171Z [] lm75 2-0048: hwmon1: sensor 'lm75b' 2022-10-30T18:50:59.170Z [] lm75 2-0048: supply vs not found, using dummy regulator 2022-10-30T18:50:59.169Z [] rtc-pcf85063 2-0051: setting system clock to 2022-10-30T18:50:56 UTC (1667155856) 2022-10-30T18:50:59.169Z [] rtc-pcf85063 2-0051: registered as rtc0 2022-10-30T18:50:59.168Z [] axp20x-i2c 0-0034: AXP20X driver loaded 2022-10-30T18:50:59.167Z [] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set 2022-10-30T18:50:59.167Z [] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set 2022-10-30T18:50:59.167Z [] axp20x-adc axp22x-adc: DMA mask not set 2022-10-30T18:50:59.166Z [] ldo_io1: supplied by regulator-dummy 2022-10-30T18:50:59.166Z [] ldo_io0: supplied by regulator-dummy 2022-10-30T18:50:59.166Z [] rtc_ldo: supplied by regulator-dummy 2022-10-30T18:50:59.166Z [] dldo4: supplied by regulator-dummy 2022-10-30T18:50:59.165Z [] dldo3: supplied by regulator-dummy 2022-10-30T18:50:59.165Z [] dldo2: supplied by regulator-dummy 2022-10-30T18:50:59.165Z [] vcc-sd-alt: supplied by regulator-dummy 2022-10-30T18:50:59.165Z [] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV 2022-10-30T18:50:59.165Z [] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV 2022-10-30T18:50:59.165Z [] vcc-pe: supplied by regulator-dummy 2022-10-30T18:50:59.165Z [] vcc-pe: Bringing 1200000uV into 1800000-1800000uV 2022-10-30T18:50:59.165Z [] eldo2: supplied by regulator-dummy 2022-10-30T18:50:59.165Z [] eldo1: supplied by regulator-dummy 2022-10-30T18:50:59.164Z [] avcc-pll: supplied by regulator-dummy 2022-10-30T18:50:59.164Z [] aldo2: supplied by regulator-dummy 2022-10-30T18:50:59.164Z [] aldo2: Bringing 2500000uV into 3300000-3300000uV 2022-10-30T18:50:59.164Z [] tv: supplied by regulator-dummy 2022-10-30T18:50:59.164Z [] tv: Bringing 700000uV into 3300000-3300000uV 2022-10-30T18:50:59.164Z [] tv: Bringing 700000uV into 3300000-3300000uV 2022-10-30T18:50:59.164Z [] random: fast init done 2022-10-30T18:50:59.164Z [] dc5ldo: supplied by vcc-dram 2022-10-30T18:50:59.164Z [] vcc-gmac-phy: supplied by vcc-3v3 2022-10-30T18:50:59.163Z [] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER 2022-10-30T18:50:59.163Z [] vcc-dram: supplied by regulator-dummy 2022-10-30T18:50:59.163Z [] dcdc4: supplied by regulator-dummy 2022-10-30T18:50:59.163Z [] vdd-sys: supplied by regulator-dummy 2022-10-30T18:50:59.163Z [] vdd-cpu: supplied by regulator-dummy 2022-10-30T18:50:59.163Z [] vcc-3v3: supplied by regulator-dummy 2022-10-30T18:50:59.163Z [] vcc-3v3: supplied by regulator-dummy 2022-10-30T18:50:59.163Z [] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0034/axp221-pek/input/input0 2022-10-30T18:50:59.163Z [] axp20x-i2c 0-0034: AXP20x variant AXP221 found 2022-10-30T18:50:59.163Z [] axp20x-i2c 0-0034: AXP20x variant AXP221 found 2022-10-30T18:50:59.162Z [] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back 2022-10-30T18:50:59.161Z [] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl 2022-10-30T18:50:59.161Z [] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 2022-10-30T18:50:59.160Z [] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 2022-10-30T18:50:59.159Z [] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator 2022-10-30T18:50:59.159Z [] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back 2022-10-30T18:50:59.158Z [] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl 2022-10-30T18:50:59.158Z [] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 2022-10-30T18:50:59.157Z [] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 2022-10-30T18:50:59.157Z [] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 2022-10-30T18:50:59.157Z [] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator 2022-10-30T18:50:59.156Z [] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 2022-10-30T18:50:59.156Z [] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 2022-10-30T18:50:59.155Z [] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 2022-10-30T18:50:59.155Z [] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator 2022-10-30T18:50:59.154Z [] libphy: sun4i_mii_bus: probed 2022-10-30T18:50:59.154Z [] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator 2022-10-30T18:50:59.153Z [] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back 2022-10-30T18:50:59.153Z [] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl 2022-10-30T18:50:59.152Z [] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 2022-10-30T18:50:59.152Z [] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 2022-10-30T18:50:59.151Z [] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator 2022-10-30T18:50:59.151Z [] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator 2022-10-30T18:50:59.150Z [] printk: console [ttyS0] enabled 2022-10-30T18:50:59.150Z [] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 52, base_baud = 1500000) is a Allwinner sun4i 2022-10-30T18:50:59.150Z [] printk: console [ttyS0] disabled 2022-10-30T18:50:59.150Z [] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator 2022-10-30T18:50:59.149Z [] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver 2022-10-30T18:50:59.149Z [] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO 2022-10-30T18:50:59.148Z [] Loading compiled-in X.509 certificates 2022-10-30T18:50:59.148Z [] registered taskstats version 1 2022-10-30T18:50:59.148Z [] Registering SWP/SWPB emulation handler 2022-10-30T18:50:59.148Z [] Registering SWP/SWPB emulation handler 2022-10-30T18:50:59.148Z [] Key type dns_resolver registered 2022-10-30T18:50:59.148Z [] can: netlink gateway - max_hops=1 2022-10-30T18:50:59.148Z [] can: broadcast manager protocol 2022-10-30T18:50:59.147Z [] can: raw protocol 2022-10-30T18:50:59.147Z [] NET: Registered protocol family 29 2022-10-30T18:50:59.147Z [] can: controller area network core 2022-10-30T18:50:59.147Z [] NET: Registered protocol family 17 2022-10-30T18:50:59.147Z [] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 2022-10-30T18:50:59.147Z [] Segment Routing with IPv6 2022-10-30T18:50:59.147Z [] Segment Routing with IPv6 2022-10-30T18:50:59.147Z [] NET: Registered protocol family 10 2022-10-30T18:50:59.147Z [] iio-rescale vin-volt: using raw+scale source channel 2022-10-30T18:50:59.146Z [] iio-rescale a3-volt: using raw+scale source channel 2022-10-30T18:50:59.145Z [] iio-rescale a2-volt: using raw+scale source channel 2022-10-30T18:50:59.145Z [] iio-rescale a1-volt: using raw+scale source channel 2022-10-30T18:50:59.144Z [] usbhid: USB HID core driver 2022-10-30T18:50:59.144Z [] usbcore: registered new interface driver usbhid 2022-10-30T18:50:59.144Z [] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 2022-10-30T18:50:59.143Z [] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) 2022-10-30T18:50:59.143Z [] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) 2022-10-30T18:50:59.143Z [] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) 2022-10-30T18:50:59.142Z [] sun8i-ce 1c15000.crypto: Register ecb(aes) 2022-10-30T18:50:59.141Z [] sun8i-ce 1c15000.crypto: Register cbc(aes) 2022-10-30T18:50:59.141Z [] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority 2022-10-30T18:50:59.140Z [] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority 2022-10-30T18:50:59.140Z [] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority 2022-10-30T18:50:59.139Z [] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority 2022-10-30T18:50:59.139Z [] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) 2022-10-30T18:50:59.138Z [] ledtrig-cpu: registered to indicate activity on CPUs 2022-10-30T18:50:59.138Z [] ledtrig-cpu: registered to indicate activity on CPUs 2022-10-30T18:50:59.138Z [] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 2022-10-30T18:50:59.137Z [] i2c /dev entries driver 2022-10-30T18:50:59.137Z [] sun6i-rtc 1c20400.rtc: RTC enabled 2022-10-30T18:50:59.136Z [] sun6i-rtc 1c20400.rtc: registered as rtc1 2022-10-30T18:50:59.135Z [] usbserial: USB Serial support registered for generic 2022-10-30T18:50:59.135Z [] usbcore: registered new interface driver usbserial_generic 2022-10-30T18:50:59.135Z [] usbcore: registered new interface driver usb-storage 2022-10-30T18:50:59.135Z [] ohci-platform: OHCI generic platform driver 2022-10-30T18:50:59.135Z [] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 2022-10-30T18:50:59.135Z [] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 2022-10-30T18:50:59.135Z [] ehci-platform: EHCI generic platform driver 2022-10-30T18:50:59.135Z [] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 2022-10-30T18:50:59.134Z [] PPP generic driver version 2.4.2 2022-10-30T18:50:59.134Z [] CAN device driver interface 2022-10-30T18:50:59.134Z [] libphy: sun4i_mii_bus: probed 2022-10-30T18:50:59.134Z [] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator 2022-10-30T18:50:59.133Z [] libphy: Fixed MDIO Bus: probed 2022-10-30T18:50:59.133Z [] loop: module loaded 2022-10-30T18:50:59.133Z [] brd: module loaded 2022-10-30T18:50:59.133Z [] brd: module loaded 2022-10-30T18:50:59.133Z [] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled 2022-10-30T18:50:59.132Z [] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO 2022-10-30T18:50:59.131Z [] io scheduler kyber registered 2022-10-30T18:50:59.131Z [] io scheduler mq-deadline registered 2022-10-30T18:50:59.131Z [] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) 2022-10-30T18:50:59.131Z [] bounce: pool size: 64 pages 2022-10-30T18:50:59.131Z [] Asymmetric key parser 'x509' registered 2022-10-30T18:50:59.131Z [] Key type asymmetric registered 2022-10-30T18:50:59.131Z [] Key type id_legacy registered 2022-10-30T18:50:59.131Z [] Key type id_legacy registered 2022-10-30T18:50:59.130Z [] Key type id_resolver registered 2022-10-30T18:50:59.130Z [] NFS: Registering the id_resolver key type 2022-10-30T18:50:59.130Z [] workingset: timestamp_bits=14 max_order=18 bucket_order=4 2022-10-30T18:50:59.130Z [] Initialise system trusted keyrings 2022-10-30T18:50:59.130Z [] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available 2022-10-30T18:50:59.130Z [] RPC: Registered tcp NFSv4.1 backchannel transport module. 2022-10-30T18:50:59.130Z [] RPC: Registered tcp transport module. 2022-10-30T18:50:59.130Z [] RPC: Registered udp transport module. 2022-10-30T18:50:59.130Z [] RPC: Registered named UNIX socket transport module. 2022-10-30T18:50:59.130Z [] RPC: Registered named UNIX socket transport module. 2022-10-30T18:50:59.129Z [] NET: Registered protocol family 1 2022-10-30T18:50:59.129Z [] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) 2022-10-30T18:50:59.129Z [] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) 2022-10-30T18:50:59.129Z [] TCP: Hash tables configured (established 8192 bind 8192) 2022-10-30T18:50:59.129Z [] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) 2022-10-30T18:50:59.129Z [] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) 2022-10-30T18:50:59.129Z [] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) 2022-10-30T18:50:59.129Z [] NET: Registered protocol family 2 2022-10-30T18:50:59.128Z [] clocksource: Switched to clocksource arch_sys_counter 2022-10-30T18:50:59.128Z [] clocksource: Switched to clocksource arch_sys_counter 2022-10-30T18:50:59.128Z [] Advanced Linux Sound Architecture Driver Initialized. 2022-10-30T18:50:59.128Z [] PTP clock support registered 2022-10-30T18:50:59.128Z [] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti  2022-10-30T18:50:59.128Z [] pps_core: LinuxPPS API ver. 1 registered 2022-10-30T18:50:59.128Z [] videodev: Linux video capture interface: v2.00 2022-10-30T18:50:59.128Z [] mc: Linux media interface: v0.10 2022-10-30T18:50:59.128Z [] usbcore: registered new device driver usb 2022-10-30T18:50:59.128Z [] usbcore: registered new interface driver hub 2022-10-30T18:50:59.127Z [] usbcore: registered new interface driver usbfs 2022-10-30T18:50:59.127Z [] usbcore: registered new interface driver usbfs 2022-10-30T18:50:59.127Z [] SCSI subsystem initialized 2022-10-30T18:50:59.127Z [] hw-breakpoint: maximum watchpoint size is 8 bytes. 2022-10-30T18:50:59.127Z [] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. 2022-10-30T18:50:59.127Z [] No ATAGs? 2022-10-30T18:50:59.127Z [] thermal_sys: Registered thermal governor 'step_wise' 2022-10-30T18:50:59.127Z [] DMA: preallocated 256 KiB pool for atomic coherent allocations 2022-10-30T18:50:59.127Z [] NET: Registered protocol family 16 2022-10-30T18:50:59.126Z [] pinctrl core: initialized pinctrl subsystem 2022-10-30T18:50:59.126Z [] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) 2022-10-30T18:50:59.126Z [] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) 2022-10-30T18:50:59.126Z [] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 2022-10-30T18:50:59.126Z [] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 2022-10-30T18:50:59.126Z [] devtmpfs: initialized 2022-10-30T18:50:59.126Z [] CPU: Virtualization extensions available. 2022-10-30T18:50:59.126Z [] CPU: All CPU(s) started in HYP mode. 2022-10-30T18:50:59.126Z [] SMP: Total of 4 processors activated (192.00 BogoMIPS). 2022-10-30T18:50:59.126Z [] smp: Brought up 1 node, 4 CPUs 2022-10-30T18:50:59.125Z [] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 2022-10-30T18:50:59.125Z [] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 2022-10-30T18:50:59.125Z [] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 2022-10-30T18:50:59.125Z [] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 2022-10-30T18:50:59.125Z [] smp: Bringing up secondary CPUs ... 2022-10-30T18:50:59.125Z [] rcu: Hierarchical SRCU implementation. 2022-10-30T18:50:59.125Z [] Setting up static identity map for 0x40100000 - 0x40100060 2022-10-30T18:50:59.125Z [] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 2022-10-30T18:50:59.125Z [] /cpus/cpu@3 missing clock-frequency property 2022-10-30T18:50:59.124Z [] /cpus/cpu@2 missing clock-frequency property 2022-10-30T18:50:59.124Z [] /cpus/cpu@1 missing clock-frequency property 2022-10-30T18:50:59.124Z [] /cpus/cpu@0 missing clock-frequency property 2022-10-30T18:50:59.124Z [] /cpus/cpu@0 missing clock-frequency property 2022-10-30T18:50:59.124Z [] CPU: Testing write buffer coherency: ok 2022-10-30T18:50:59.124Z [] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) 2022-10-30T18:50:59.124Z [] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) 2022-10-30T18:50:59.124Z [] pid_max: default: 32768 minimum: 301 2022-10-30T18:50:59.124Z [] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) 2022-10-30T18:50:59.123Z [] Console: colour dummy device 80x30 2022-10-30T18:50:59.123Z [] Switching to timer-based delay loop, resolution 41ns 2022-10-30T18:50:59.123Z [] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 2022-10-30T18:50:59.123Z [] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 2022-10-30T18:50:59.123Z [] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 2022-10-30T18:50:59.123Z [] arch_timer: cp15 timer(s) running at 24.00MHz (phys). 2022-10-30T18:50:59.123Z [] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 2022-10-30T18:50:59.123Z [] random: get_random_bytes called from start_kernel+0x680/0x84c with crng_init=0 2022-10-30T18:50:59.123Z [] GIC: Using split EOI/Deactivate mode 2022-10-30T18:50:59.123Z [] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 2022-10-30T18:50:59.122Z [] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 2022-10-30T18:50:59.122Z [] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. 2022-10-30T18:50:59.122Z [] Rude variant of Tasks RCU enabled. 2022-10-30T18:50:59.122Z [] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. 2022-10-30T18:50:59.122Z [] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. 2022-10-30T18:50:59.122Z [] rcu: RCU event tracing is enabled. 2022-10-30T18:50:59.122Z [] rcu: Hierarchical RCU implementation. 2022-10-30T18:50:59.122Z [] ftrace: allocated 61 pages with 5 groups 2022-10-30T18:50:59.122Z [] ftrace: allocating 30807 entries in 61 pages 2022-10-30T18:50:59.122Z [] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 2022-10-30T18:50:59.121Z [] Memory: 1005600K/1048576K available (9216K kernel code, 1429K rwdata, 3096K rodata, 1024K init, 296K bss, 26592K reserved, 16384K cma-reserved, 245748K highmem) 2022-10-30T18:50:59.121Z [] mem auto-init: stack:off, heap alloc:off, heap free:off 2022-10-30T18:50:59.121Z [] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) 2022-10-30T18:50:59.121Z [] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) 2022-10-30T18:50:59.121Z [] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) 2022-10-30T18:50:59.121Z [] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p3 rootwait ro 2022-10-30T18:50:59.121Z [] Built 1 zonelists, mobility grouping on. Total pages: 260416 2022-10-30T18:50:59.121Z [] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 2022-10-30T18:50:59.121Z [] pcpu-alloc: s47884 r8192 d21748 u77824 alloc=19*4096 2022-10-30T18:50:59.121Z [] percpu: Embedded 19 pages/cpu s47884 r8192 d21748 u77824 2022-10-30T18:50:59.120Z [] psci: Using PSCI v0.1 Function IDs from DT 2022-10-30T18:50:59.120Z [] psci: probing for conduit method from DT. 2022-10-30T18:50:59.120Z [] HighMem zone: 65536 pages, LIFO batch:15 2022-10-30T18:50:59.120Z [] Normal zone: 196608 pages, LIFO batch:63 2022-10-30T18:50:59.120Z [] Normal zone: 196608 pages, LIFO batch:63 2022-10-30T18:50:59.120Z [] Normal zone: 0 pages reserved 2022-10-30T18:50:59.120Z [] Normal zone: 1728 pages used for memmap 2022-10-30T18:50:59.120Z [] On node 0 totalpages: 262144 2022-10-30T18:50:59.120Z [] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] 2022-10-30T18:50:59.120Z [] node 0: [mem 0x0000000040000000-0x000000007fffffff] 2022-10-30T18:50:59.119Z [] Early memory node ranges 2022-10-30T18:50:59.119Z [] Movable zone start for each node 2022-10-30T18:50:59.119Z [] HighMem [mem 0x0000000070000000-0x000000007fffffff] 2022-10-30T18:50:59.119Z [] Normal [mem 0x0000000040000000-0x000000006fffffff] 2022-10-30T18:50:59.119Z [] Normal [mem 0x0000000040000000-0x000000006fffffff] 2022-10-30T18:50:59.119Z [] Zone ranges: 2022-10-30T18:50:59.119Z [] cma: Reserved 16 MiB at 0x7ec00000 2022-10-30T18:50:59.119Z [] Memory policy: Data cache writealloc 2022-10-30T18:50:59.119Z [] OF: fdt: Machine model: Wiren Board rev. 7.3.3 (A40i) 2022-10-30T18:50:59.119Z [] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache 2022-10-30T18:50:59.118Z [] CPU: div instructions available: patching division code 2022-10-30T18:50:59.118Z [] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d 2022-10-30T18:50:59.118Z [] Linux version 5.10.35-wb120 (jenkins@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 6.3.0-18) 6.3.0 20170516, GNU ld (GNU Binutils for Debian) 2.28) #1 SMP Fri Sep 2 07:33:43 UTC 2022 2022-10-30T18:50:59.118Z [] Booting Linux on physical CPU 0x0 2022-10-30T18:50:59.118Z [] Booting Linux on physical CPU 0x0 2022-10-30T18:50:26.893Z [ntp] error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:50:19.980Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:50:19.978Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:50:19.975Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:50:19.973Z [init] Started KNX Daemon. 2022-10-30T18:50:19.971Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:50:19.969Z [knxd] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:50:19.926Z [init] Starting KNX Daemon... 2022-10-30T18:50:19.914Z [init] Stopped KNX Daemon. 2022-10-30T18:50:19.914Z [init] Stopped KNX Daemon. 2022-10-30T18:50:19.912Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:50:14.893Z [ntp] error resolving pool 3.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:50:10.905Z [ntp] error resolving pool 1.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:50:09.721Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:50:09.719Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:50:09.716Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:50:09.713Z [init] Started KNX Daemon. 2022-10-30T18:50:09.712Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:50:09.709Z [] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:50:09.709Z [] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:50:09.669Z [init] Starting KNX Daemon... 2022-10-30T18:50:09.664Z [init] Stopped KNX Daemon. 2022-10-30T18:50:09.662Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:49:59.471Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:49:59.469Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:49:59.467Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:49:59.463Z [init] Started KNX Daemon. 2022-10-30T18:49:59.462Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:49:59.459Z [knxd] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:49:59.459Z [knxd] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:49:59.420Z [init] Starting KNX Daemon... 2022-10-30T18:49:59.414Z [init] Stopped KNX Daemon. 2022-10-30T18:49:59.412Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:49:49.224Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:49:49.222Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:49:49.219Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:49:49.214Z [init] Started KNX Daemon. 2022-10-30T18:49:49.212Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:49:49.210Z [] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:49:49.210Z [] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:49:49.169Z [init] Starting KNX Daemon... 2022-10-30T18:49:49.164Z [init] Stopped KNX Daemon. 2022-10-30T18:49:49.162Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:49:46.893Z [ntp] error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:49:46.180Z [wb-rules] INFO: network/GPRS IP: failed to convert value '', passing raw 2022-10-30T18:49:46.174Z [wb-rules] Device "ppp0" does not exist. 2022-10-30T18:49:46.165Z [wb-rules] INFO: network/Ethernet 2 IP: failed to convert value '', passing raw 2022-10-30T18:49:46.160Z [wb-rules] INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw 2022-10-30T18:49:38.980Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:49:38.980Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:49:38.978Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:49:38.975Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:49:38.975Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:49:38.972Z [init] Started KNX Daemon. 2022-10-30T18:49:38.971Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:49:38.969Z [knxd] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:49:38.923Z [init] Starting KNX Daemon... 2022-10-30T18:49:38.917Z [init] Stopped KNX Daemon. 2022-10-30T18:49:38.914Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:49:28.726Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:49:28.723Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:49:28.720Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:49:28.720Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:49:28.713Z [init] Started KNX Daemon. 2022-10-30T18:49:28.711Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:49:28.709Z [] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:49:28.670Z [init] Starting KNX Daemon... 2022-10-30T18:49:28.666Z [init] Stopped KNX Daemon. 2022-10-30T18:49:28.664Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:49:19.892Z [ntp] error resolving pool 2.debian.pool.ntp.org: Name or service not known (-2) 2022-10-30T18:49:18.470Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:49:18.469Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:49:18.469Z [init] knxd.service: Unit entered failed state. 2022-10-30T18:49:18.466Z [init] knxd.service: Main process exited, code=exited, status=1/FAILURE 2022-10-30T18:49:18.464Z [init] Started KNX Daemon. 2022-10-30T18:49:18.462Z [] WirenboardKNX: F00000105: [12:server] Link down, terminating 2022-10-30T18:49:18.460Z [knxd] WirenboardKNX: E00000064: [19:router] router: setup router: failed 2022-10-30T18:49:18.420Z [init] Starting KNX Daemon... 2022-10-30T18:49:18.414Z [init] Stopped KNX Daemon. 2022-10-30T18:49:18.412Z [init] knxd.service: Service hold-off time over, scheduling restart. 2022-10-30T18:49:08.226Z [init] knxd.service: Failed with result 'exit-code'. 2022-10-30T18:49:08.224Z [init] knxd.service: Unit entered failed state.