…Áň U-Boot SPL 2017.03-1.2.0-gf92dee6f51 (Jun 02 2021 - 13:45:31) DRAM init ok, rows:16, ncs:1, size: 1024MB Trying to boot from MMC1 Warning - USDHC2 controller not supporting U-Boot 2017.03-1.2.0-gf92dee6f51 (Jun 02 2021 - 13:45:31 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 32C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 1 GiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 3  2  1  0 Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found No storage devices, perhaps not 'usb start'ed..? No USB update detected, continuing boot U-Boot SPL 2017.03-1.2.0-gf92dee6f51 (Jun 02 2021 - 13:45:31) DRAM init ok, rows:16, ncs:1, size: 1024MB Trying to boot from MMC1 Warning - USDHC2 controller not supporting U-Boot 2017.03-1.2.0-gf92dee6f51 (Jun 02 2021 - 13:45:31 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 34C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 1 GiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 3  2  1  0 Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found No storage devices, perhaps not 'usb start'ed..? No USB update detected, continuing boot switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 324 bytes read in 69 ms (3.9 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 5899176 bytes read in 392 ms (14.4 MiB/s) MMC read: dev # 0, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt imx6ul-wirenboard680 46902 bytes read in 143 ms (319.3 KiB/s) 485 bytes read in 153 ms (2.9 KiB/s) Applying DT overlay wb6-nogsm 597 bytes read in 146 ms (3.9 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu 509 bytes read in 174 ms (2 KiB/s) Applying DT overlay wb6-noradio 334 bytes read in 113 ms (2 KiB/s) Applying DT overlay wb6-eth1 254 bytes read in 126 ms (2 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to bef4b000, end bef6dfff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb111 (jenkins@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 6.3.0-18) 6.3.0 20170516, GNU ld (GNU Binutils for Debian) 2.28) #1 Wed Apr 20 13:39:52 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 6.8.0 (i.MX6UL/ULL) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 259840 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1008680K/1048576K available (8192K kernel code, 714K rwdata, 2680K rodata, 1024K init, 272K bss, 23512K reserved, 16384K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x238/0x3d4 with crng_init=0 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000018] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000062] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002865] Console: colour dummy device 80x30 [ 0.002935] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002976] pid_max: default: 32768 minimum: 301 [ 0.003428] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003472] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005097] CPU: Testing write buffer coherency: ok [ 0.006195] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.007236] devtmpfs: initialized [ 0.025510] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.026047] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.026096] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.027485] pinctrl core: initialized pinctrl subsystem [ 0.029526] NET: Registered protocol family 16 [ 0.031890] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.033964] thermal_sys: Registered thermal governor 'step_wise' [ 0.034258] cpuidle: using governor menu [ 0.230983] vdd1p1: supplied by regulator-dummy [ 0.243625] vdd3p0: supplied by regulator-dummy [ 0.256251] cpu: supplied by regulator-dummy [ 0.268831] vddsoc: supplied by regulator-dummy [ 0.629658] No ATAGs? [ 0.629720] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.629743] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.630357] debugfs: Directory 'dummy-iomuxc-gpr@20e4000' with parent 'regmap' already present! [ 0.631037] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.632500] imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000 [ 0.632541] imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl driver [ 0.673995] mxs-dma 1804000.dma-apbh: initialized [ 0.679402] SCSI subsystem initialized [ 0.679919] usbcore: registered new interface driver usbfs [ 0.680052] usbcore: registered new interface driver hub [ 0.680163] usbcore: registered new device driver usb [ 0.681035] gpio-48 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.681165] gpio-49 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.682549] i2c-gpio i2c_rtc: using lines 48 (SDA) and 49 (SCL) [ 0.683531] gpio-76 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.683671] gpio-67 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.684285] i2c-gpio i2c_eeprom1: using lines 76 (SDA) and 67 (SCL) [ 0.685007] gpio-70 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.685134] gpio-71 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.685745] i2c-gpio i2c_eeprom2: using lines 70 (SDA) and 71 (SCL) [ 0.687349] gpio-30 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.687719] i2c i2c-1: IMX I2C adapter registered [ 0.688469] mc: Linux media interface: v0.10 [ 0.688587] videodev: Linux video capture interface: v2.00 [ 0.688739] pps_core: LinuxPPS API ver. 1 registered [ 0.688765] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.688836] PTP clock support registered [ 0.689474] Advanced Linux Sound Architecture Driver Initialized. [ 0.691678] clocksource: Switched to clocksource mxc_timer1 [ 0.709830] NET: Registered protocol family 2 [ 0.711031] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.711148] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.711350] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.711543] TCP: Hash tables configured (established 8192 bind 8192) [ 0.711921] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.711998] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.712364] NET: Registered protocol family 1 [ 0.713292] RPC: Registered named UNIX socket transport module. [ 0.713331] RPC: Registered udp transport module. [ 0.713352] RPC: Registered tcp transport module. [ 0.713370] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.714582] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.717506] Initialise system trusted keyrings [ 0.717958] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.729783] NFS: Registering the id_resolver key type [ 0.729865] Key type id_resolver registered [ 0.729887] Key type id_legacy registered [ 0.730836] Key type asymmetric registered [ 0.730874] Asymmetric key parser 'x509' registered [ 0.730980] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.731006] io scheduler mq-deadline registered [ 0.731025] io scheduler kyber registered [ 0.743501] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.743552] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.747561] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 21, base_baud = 5000000) is a IMX [ 1.410774] printk: console [ttymxc0] enabled [ 1.417317] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59, base_baud = 5000000) is a IMX [ 1.461209] imx_rngc 2284000.rng: Freescale RNGB registered (HW revision 2.129) [ 1.468647] random: fast init done [ 1.472620] random: crng init done [ 1.512444] brd: module loaded [ 1.530359] loop: module loaded [ 1.534000] at24 5-0050: supply vcc not found, using dummy regulator [ 1.545459] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.552475] at24 6-0050: supply vcc not found, using dummy regulator [ 1.563860] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.576429] libphy: Fixed MDIO Bus: probed [ 1.583674] pps pps0: new PPS source ptp0 [ 1.624509] libphy: fec_enet_mii_bus: probed [ 1.629814] fec 20b4000.ethernet eth0: registered PHC device 0 [ 1.752374] pps pps1: new PPS source ptp1 [ 1.759231] libphy: fec_enet_mii_bus: probed [ 1.768073] fec 2188000.ethernet eth1: registered PHC device 1 [ 1.774939] PPP generic driver version 2.4.2 [ 1.779676] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.786324] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.792111] usbcore: registered new interface driver usb-storage [ 1.798363] usbcore: registered new interface driver usbserial_generic [ 1.805046] usbserial: USB Serial support registered for generic [ 1.854532] rtc rtc0: invalid alarm value: 2022-08-28T33:00:00 [ 1.860809] rtc-pcf8563 4-0051: registered as rtc0 [ 1.877642] rtc-pcf8563 4-0051: setting system clock to 2022-08-11T08:26:16 UTC (1660206376) [ 1.896471] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc1 [ 1.903013] i2c /dev entries driver [ 1.909866] lm75 4-0048: supply vs not found, using dummy regulator [ 1.921528] lm75 4-0048: hwmon0: sensor 'lm75b' [ 2.042219] sdhci: Secure Digital Host Controller Interface driver [ 2.048435] sdhci: Copyright(c) Pierre Ossman [ 2.052865] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.066833] ledtrig-cpu: registered to indicate activity on CPUs [ 2.074704] usbcore: registered new interface driver usbhid [ 2.080306] usbhid: USB HID core driver [ 2.096920] NET: Registered protocol family 10 [ 2.101511] mmc0: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 2.111521] Segment Routing with IPv6 [ 2.116036] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.124055] NET: Registered protocol family 17 [ 2.128838] Key type dns_resolver registered [ 2.137650] registered taskstats version 1 [ 2.141893] Loading compiled-in X.509 certificates [ 2.164259] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 2.176165] of_cfs_init [ 2.178925] of_cfs_init: OK [ 2.186816] ALSA device list: [ 2.189822] No soundcards found. [ 2.193590] Waiting for root device /dev/mmcblk0p3... [ 2.203373] mmc0: new DDR MMC card at address 0001 [ 2.209086] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 2.214152] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 2.220435] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 2.226776] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB, chardev (245:0) [ 2.237371] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.259077] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem [ 2.266488] EXT4-fs (mmcblk0p3): write access will be enabled during recovery [ 2.864078] EXT4-fs (mmcblk0p3): recovery complete [ 2.874195] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.882493] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 2.890562] devtmpfs: mounted [ 2.898974] Freeing unused kernel memory: 1024K [ 2.904528] Run /sbin/init as init process [ 3.273365] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 3.292392] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 3.336241] systemd[1]: Set hostname to . [ 3.955748] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 3.992320] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 4.055765] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.092432] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 4.133351] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.175814] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.213638] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Created slice System Slice. [ OK ] Created slice system-systemd\x2dfsck.slice. Mounting Debug File System... Starting Load Kernel Modules... [ OK ] Created slice system-serial\x2dgetty.slice. Mounting /sys/kernel/config... Mounting POSIX Message Queue File System... [ OK ] Listening on udev Control Socket. [ OK ] Reached target Remote File Systems. [ OK ] Reached target Encrypted Volumes. Starting Journal Service... Starting Create list of required st…ce nodes for the current kernel... [ OK ] Reached target Slices. [ OK ] Listening on udev Kernel Socket. Starting File System Check on Root Device... [ OK ] Created slice system-getty.slice. Starting Nameserver information manager... [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Mounted /sys/kernel/config. [ OK ] Started Load Kernel Modules. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started File System Check on Root Device. [ OK ] Started Journal Service. [ OK ] Started Nameserver information manager. [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... [ 5.331790] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Apply Kernel Variables. Starting prepare partitions at first boot... Starting Load/Save Random Seed... Starting udev Coldplug all Devices... [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Kernel Device Manager. [ OK ] Started prepare partitions at first boot. [ OK ] Reached target Local File Systems (Pre). [ 7.593743] Driver for 1-wire Dallas network protocol. [ OK ] Started udev Coldplug all Devices. [ 7.631233] gpio-68 (onewire_w1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 7.717614] gpio-11 (onewire_w2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ OK ] Found device /dev/ttymxc0. [ 8.129449] fec 20b4000.ethernet rename2: renamed from eth0 [ 8.511112] fec 2188000.ethernet eth0: renamed from eth1 [ 8.573919] imx_usb 2184000.usb: No over current polarity defined [ 8.607315] fec 20b4000.ethernet eth1: renamed from rename2 [ 8.631783] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 8.636725] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 8.831808] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 8.852137] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 8.860432] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.867721] usb usb1: Product: EHCI Host Controller [ 8.872634] usb usb1: Manufacturer: Linux 5.10.35-wb111 ehci_hcd [ 8.878648] usb usb1: SerialNumber: ci_hdrc.0 [ 9.181947] hub 1-0:1.0: USB hub found [ 9.239112] hub 1-0:1.0: 1 port detected [ 9.324115] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 9.329068] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 9.491803] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 9.543660] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 9.552016] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.559247] usb usb2: Product: EHCI Host Controller [ 9.564167] usb usb2: Manufacturer: Linux 5.10.35-wb111 ehci_hcd [ 9.570180] usb usb2: SerialNumber: ci_hdrc.1 [ 9.631878] usb usb1-port1: over-current condition [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/mmcblk0p6. [ 9.811645] hub 2-0:1.0: USB hub found [ 9.849010] hub 2-0:1.0: 1 port detected Starting File System Check on /dev/mmcblk0p6... [ 10.271845] usb 2-1: new high-speed USB device number 2 using ci_hdrc Activating swap /dev/mmcblk0p5... [ 10.402076] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SS [ 10.512758] usb 2-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 10.520992] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ 10.622226] hub 2-1:1.0: USB hub found [ 10.634081] hub 2-1:1.0: 4 ports detected [ 10.971805] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 11.133487] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00 [ 11.141937] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.149283] usb 2-1.1: Product: 802.11n WLAN Adapter [ 11.154296] usb 2-1.1: Manufacturer: Realtek [ 11.158573] usb 2-1.1: SerialNumber: 00e04c000001 [ OK ] Started File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 11.466617] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 11.493302] Bluetooth: Core ver 2.22 [ 11.497045] NET: Registered protocol family 31 [ 11.501500] Bluetooth: HCI device and connection manager initialized [ 11.537468] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 11.565026] Bluetooth: HCI socket layer initialized [ 11.569943] Bluetooth: L2CAP socket layer initialized [ OK ] Mounted /mnt/data. [ 11.616990] Bluetooth: SCO socket layer initialized [ 11.689059] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Mounting /var/log... [ 11.717651] usbcore: registered new interface driver btusb [ 11.725253] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 11.750632] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 11.756707] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 11.766754] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 11.773327] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 11.782618] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 Starting Load/Save RF Kill Switch Status... [ 11.884499] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 11.931365] cfg80211: failed to load regulatory.db [ OK ] Mounted /var/log. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Reached target Local File Systems. Starting Raise network interfaces... Starting prepare mounts and symlinks to config files... Starting Flush Journal to Persistent Storage... [ 12.343680] systemd-journald[104]: Received request to flush runtime journal from PID 1 [ 12.542267] systemd-journald[104]: File /var/log/journal/4718d444e2911fd1dead61ff62163b04/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 12.594564] RTL871X: module init start [ 12.598378] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 [ 12.605415] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ 12.618225] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ 12.858142] RTL871X: rtw_ndev_init(wlan0) [ 12.878342] RTL871X: rtw_ndev_init(wlan1) [ 12.905896] usbcore: registered new interface driver rtl8723bu [ 12.911826] RTL871X: module init ret=0 [ 13.144232] usbcore: registered new interface driver rtl8xxxu [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Raise network interfaces. [ OK ] Started prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. [ 14.451941] SMSC LAN8710/LAN8720 2188000.ethernet-2:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet-2:00, irq=POLL) [ OK ] Reached target System Time Synchronized. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on KNX Daemon (socket). [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. [ OK ] Started Monitor directories with device templates for wb-mqtt-serial. [ OK ] Reached target Paths. [ OK ] Reached target Basic System. Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... Starting Bluetooth service... Starting Restore local date from Wiren Board GSM RTC... Starting Login Service... [ OK ] Started watch config files. Starting Mosquitto MQTT v3.1/v3.1.1 Broker... [ OK ] Started Cgroup management daemon. [ OK ] Started Regular background program processing daemon. Starting Initialize Wiren Board Device Tree overlays... Starting System Logging Service... [ 15.567039] new mount options do not match the existing superblock, will be ignored [ OK ] Started D-Bus System Message Bus. [ OK ] Started Bluetooth service. [ 16.109029] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.114458] Bluetooth: BNEP filters: protocol multicast [ OK ] Reached target Bluetooth. [ 16.136858] Bluetooth: BNEP socket layer initialized Starting initialize filesystems at first boot... [ OK ] Started Generates wb-mqtt-serial UI schema for wb-mqtt-confed. [ OK ] Started System Logging Service. [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ OK ] Started Mosquitto MQTT v3.1/v3.1.1 Broker. [ 16.572346] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 16.631843] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Started Login Service. Starting Hostname Service... Starting LSB: startup and shutdown a emon service... Starting Wiren Board MQTT to Modbus TCP gateway... Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board firmware update service. [ OK ] Started initialize filesystems at first boot. [ OK ] Started Hostname Service. [ OK ] Started Wiren Board MQTT to OPC UA gateway. [ OK ] Reached target Network. Starting Permit User Sessions... Starting dnsmasq - A lightweight DHCP and caching DNS server... Starting KNX Daemon... Starting OpenBSD Secure Shell server... Starting A high performance web server and a reverse proxy server... [ OK ] Started Wiren Board journald to MQTT gateway. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started LSB: startup and shutdown a emon service. [ OK ] Started Permit User Sessions. [ OK ] Started KNX Daemon. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Reached target Network is Online. Starting LSB: Brings up/down network automatically... Starting LSB: Advanced IEEE 802.11 management daemon... Starting LSB: Start zabbix-agent daemon... Starting LSB: Start NTP daemon... Starting Daily apt download activities... [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttymxc0. [ OK ] Reached target Login Prompts. [ OK ] Started OpenBSD Secure Shell server. [ 24.526567] process '/sbin/netplugd' started with executable stack [ OK ] Started LSB: Start NTP daemon. Starting Compensation of systime in…evice-tree (with opposite sign)... Debian GNU/Linux 9 WB6-AKSYATYY ttymxc0 WB6-AKSYATYY login: [ 27.909594] RTL871X: RTW_ADAPTIVITY_EN_ [ 27.909620] AUTO, chplan:0x20, Regulation:3,3 [ 27.917924] RTL871X: RTW_ADAPTIVITY_MODE_ [ 27.917929] NORMAL [ 28.030533] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 224, base_baud = 5000000) is a IMX roo[ 31.823882] RTL871X: assoc success [ 31.827397] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready t[ 31.954562] Micrel KSZ8081 or KSZ8091 2188000.ethernet-2:03: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet-2:03, irq=POLL) [ 32.338308] 2288000.serial: ttymxc7 at MMIO 0x2288000 (irq = 225, base_baud = 5000000) is a IMX Password: [ 33.909036] gpio-19 (wbmz2_i2c_0): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 34.031071] gpio-18 (wbmz2_i2c_0): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 35.666290] i2c-gpio wbmz2_i2c_0: using lines 19 (SDA) and 18 (SCL) Last login: Wed Aug 10 15:34:57 UTC 2022 from 192.168.44.1 on pts/0  _ _ _ __ _(_)_ __ ___ _ __ | |__ ___ __ _ _ __ __| | \ \ /\ / / | '__/ _ \ '_ \| '_ \ / _ \ / _` | '__/ _` | \ V V /| | | | __/ | | | |_) | (_) | (_| | | | (_| | \_/\_/ |_|_| \___|_| |_|_.__/ \___/ \__,_|_| \__,_| Welcome to Wiren Board 6.8.2 (s/n AKSYATYY), release wb-2204 (as stable) Linux WB6-AKSYATYY 5.10.35-wb111 #1 Wed Apr 20 13:39:52 UTC 2022 armv7l GNU/Linux root@WB6-AKSYATYY:~# [ 62.761796] usb 2-1.3: new high-speed USB device number 4 using ci_hdrc [ 62.987014] usb 2-1.3: New USB device found, idVendor=1286, idProduct=812a, bcdDevice= 0.00 [ 62.995533] usb 2-1.3: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 63.002917] usb 2-1.3: Product: WUKONG [ 63.006709] usb 2-1.3: Manufacturer: MARVELL [ 63.249168] usb 2-1.3: can't set config #1, error -71 [ 63.341027] usb 2-1.3: USB disconnect, device number 4 [ 69.411834] usb 2-1.3: new high-speed USB device number 5 using ci_hdrc [ 69.602483] usb 2-1.3: config 1 has an invalid interface number: 5 but max is 4 [ 69.609869] usb 2-1.3: config 1 has no interface number 3 [ 69.722092] usb 2-1.3: New USB device found, idVendor=1e0e, idProduct=9011, bcdDevice= 1.00 [ 69.730521] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 69.737909] usb 2-1.3: Product: Mobile Composite Device Bus [ 69.743583] usb 2-1.3: Manufacturer: Marvell [ 69.747860] usb 2-1.3: SerialNumber: 200806006809080000 [ 70.247419] usbcore: registered new interface driver option [ 70.311091] usbcore: registered new interface driver cdc_ether [ 70.360131] usbserial: USB Serial support registered for GSM modem (1-port) [ 70.411370] rndis_host 2-1.3:1.0 usb0: register 'rndis_host' at usb-ci_hdrc.1-1.3, RNDIS device, 2e:ae:69:f5:5d:56 [ 70.494597] option 2-1.3:1.2: GSM modem (1-port) converter detected [ 70.511852] usbcore: registered new interface driver rndis_host [ 70.572032] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 70.680234] option 2-1.3:1.4: GSM modem (1-port) converter detected [ 70.739938] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 70.836610] option 2-1.3:1.5: GSM modem (1-port) converter detected [ 70.918128] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB2 la -lA /dev/ttyG[ 99.083850] PPP BSD Compression module registered [ 99.188192] PPP Deflate Compression module registered SM -bash: la: command not found root@WB6-AKSYATYY:~# la -lA /dev/ttyGSM -bash: la: command not found root@WB6-AKSYATYY:~# la -lA /dev/ttyGSMa[1@s lrwxrwxrwx 1 root root 12 Aug 11 08:27 /dev/ttyGSM -> /dev/ttyGSM0 root@WB6-AKSYATYY:~# ls -lA /dev/ttyGSM* lrwxrwxrwx 1 root root 12 Aug 11 08:27 /dev/ttyGSM -> /dev/ttyGSM0 lrwxrwxrwx 1 root root 12 Aug 11 08:27 /dev/ttyGSM0 -> /dev/ttyUSB1 lrwxrwxrwx 1 root root 12 Aug 11 08:27 /dev/ttyGSM1 -> /dev/ttyUSB2 root@WB6-AKSYATYY:~# ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000 link/ether e8:eb:1b:34:01:05 brd ff:ff:ff:ff:ff:ff 3: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether e8:eb:1b:34:75:ec brd ff:ff:ff:ff:ff:ff inet 192.168.44.44/24 brd 192.168.44.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::eaeb:1bff:fe34:75ec/64 scope link valid_lft forever preferred_lft forever 4: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 5: wlan0: mtu 1500 qdisc mq state UP group default qlen 1000 link/ether c0:21:0d:4f:b7:fb brd ff:ff:ff:ff:ff:ff inet6 fe80::c221:dff:fe4f:b7fb/64 scope link valid_lft forever preferred_lft forever 6: wlan1: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether c2:21:0d:4f:b7:fb brd ff:ff:ff:ff:ff:ff 7: usb0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 2e:ae:69:f5:5d:56 brd ff:ff:ff:ff:ff:ff 8: ppp0: mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 3 link/ppp inet 172.16.2.15 peer 10.64.64.64/32 scope global ppp0 valid_lft forever preferred_lft forever root@WB6-AKSYATYY:~# Stopping Session c2 of user rooü Stopping Session c1 of user root. Stopping User Manager for UID 0... [ OK ] Stopped target Host and Network Name Lookups. [ OK ] Stopped target Bluetooth. Stopping Bluetooth service... [ OK ] Stopped target Timers. [ OK ] Stopped Daily apt upgrade and clean activities. [ OK ] Stopped Daily apt download activities. [ OK ] Stopped target System Time Synchronized. [ OK ] Stopped Daily Cleanup of Temporary Directories. Stopping watchdog daemon... [ OK ] Stopped Bluetooth service. [ OK ] Stopped Serial Getty on ttymxc0. [ OK ] Stopped Session c1 of user root. [ OK ] Stopped Session c2 of user root. [ OK ] Stopped User Manager for UID 0. [ OK ] Stopped watchdog daemon. [ OK ] Stopped target Multi-User System. Stopping Kernel 1-Wire MQTT driver for WB-HomA... Stopping Wiren Board MQTT to Modbus TCP gateway... Stopping MQTT Driver for GPIO-controlled switches... Stopping Wiren Board firmware update service... Stopping Wiren Board configuration editor backend... Stopping Wiren Board MQTT to OPC UA gateway... Stopping Wiren Board journald to MQTT gateway... Stopping dnsmasq - A lightweight DHCP and caching DNS server... Stopping MQTT Rule engine for Wiren Board... Stopping Wiren Board MQTT KNX bridge... Stopping Initialize Wiren Board on successful boot... Stopping LSB: Start zabbix-agent daemon... Stopping LSB: startup and shutdown a emon service... Stopping D-Bus System Message Bus... Stopping MQTT Driver for ADC... Stopping LSB: Advanced IEEE 802.11 management daemon... Stopping Wiren Board database logger... Stopping System Logging Service... Stopping one-click diagnostic data …d, generating archive with data... Stopping Avahi mDNS/DNS-SD Stack... Stopping Regular background program processing daemon... [ OK ] Stopped Compensation of systime in … device-tree (with opposite sign). [ OK ] Stopped Restore local date from Wiren Board GSM RTC. Stopping Cgroup management daemon... Stopping LSB: Brings up/down network automatically... [ OK ] Stopped KNXD Configurator for Wiren Board. Stopping metrics sender.... [ OK ] Removed slice User Slice of root. Stopping Login Service... [ OK ] Stopped target Login Prompts. Stopping Getty on tty1... [ OK ] Removed slice system-serial\x2dgetty.slice. [ OK ] Stopped Login Service. [ OK ] Stopped Cgroup management daemon. [ OK ] Stopped Regular background program processing daemon. [ OK ] Stopped System Logging Service. [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped Wiren Board configuration editor backend. [ OK ] Stopped Wiren Board firmware update service. [ OK ] Stopped Wiren Board MQTT to OPC UA gateway. [ OK ] Stopped Wiren Board journald to MQTT gateway. [ OK ] Stopped Avahi mDNS/DNS-SD Stack. [ OK ] Stopped Getty on tty1. [ OK ] Stopped Wiren Board MQTT to Modbus TCP gateway. [ OK ] Stopped Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Stopped Wiren Board MQTT KNX bridge. [ OK ] Stopped metrics sender.. [ OK ] Stopped MQTT Rule engine for Wiren Board. [ OK ] Stopped Wiren Board database logger. [ OK ] Stopped MQTT Driver for ADC. [ OK ] Stopped MQTT Driver for GPIO-controlled switches. [ OK ] Stopped one-click diagnostic data c…ard, generating archive with data. [ OK ] Stopped Initialize Wiren Board Device Tree overlays. Stopping watch config files... Stopping Permit User Sessions... [ OK ] Removed slice system-getty.slice. [ OK ] Stopped watch config files. [ OK ] Stopped Initialize Wiren Board on successful boot. Stopping A high performance web server and a reverse proxy server... Stopping OpenBSD Secure Shell server... Stopping LSB: Start NTP daemon... [ OK ] Stopped OpenBSD Secure Shell server. [ OK ] Stopped LSB: Advanced IEEE 802.11 management daemon. [ OK ] Stopped LSB: Start zabbix-agent daemon. [ OK ] Stopped LSB: Brings up/down network automatically. [ OK ] Stopped A high performance web server and a reverse proxy server. [ OK ] Stopped Permit User Sessions. [ OK ] Stopped Flush Journal to Persistent Storage. [ OK ] Stopped LSB: Start NTP daemon. [ OK ] Stopped target Network is Online. Stopping KNX Daemon... [ OK ] Stopped KNX Daemon. [ OK ] Stopped dnsmasq - A lightweight DHCP and caching DNS server. [ OK ] Stopped target Network. Stopping Raise network interfaces... [ OK ] Stopped initialize filesystems at first boot. [ OK ] Stopped Raise network interfaces. [ 189.053707] RTL871X: nolinked power save enter [*** ] A stop job is running for LSB: star…own a emon service (13s / 5min 1s) [** ] A stop job is running for LSB: star…own a emon service (13s / 5min 1s) [* ] A stop job is running for LSB: star…own a emon service (14s / 5min 1s) [** ] A stop job is running for LSB: star…own a emon service (14s / 5min 1s) [*** ] A stop job is running for LSB: star…own a emon service (15s / 5min 1s) [ *** ] A stop job is running for LSB: star…own a emon service (15s / 5min 1s) [ *** ] A stop job is running for LSB: star…own a emon service (16s / 5min 1s) [ ***] A stop job is running for LSB: star…own a emon service (16s / 5min 1s) [ **] A stop job is running for LSB: star…own a emon service (17s / 5min 1s) [ *] A stop job is running for LSB: star…own a emon service (17s / 5min 1s) [ **] A stop job is running for LSB: star…own a emon service (18s / 5min 1s) [ ***] A stop job is running for LSB: star…own a emon service (18s / 5min 1s) [ *** ] A stop job is running for LSB: star…own a emon service (19s / 5min 1s) [ *** ] A stop job is running for LSB: star…own a emon service (19s / 5min 1s) [*** ] A stop job is running for LSB: star…own a emon service (20s / 5min 1s) [** ] A stop job is running for LSB: star…own a emon service (20s / 5min 1s) [* ] A stop job is running for LSB: star…own a emon service (21s / 5min 1s) [** ] A stop job is running for LSB: star…own a emon service (21s / 5min 1s) [*** ] A stop job is running for LSB: star…own a emon service (22s / 5min 1s) [ *** ] A stop job is running for LSB: star…own a emon service (22s / 5min 1s) [ *** ] A stop job is running for LSB: star…own a emon service (23s / 5min 1s) [ ***] A stop job is running for LSB: star…own a emon service (23s / 5min 1s) [ **] A stop job is running for LSB: star…own a emon service (24s / 5min 1s) [ *] A stop job is running for LSB: star…own a emon service (24s / 5min 1s) [ **] A stop job is running for LSB: star…own a emon service (25s / 5min 1s) [ ***] A stop job is running for LSB: star…own a emon service (25s / 5min 1s) [ *** ] A stop job is running for LSB: star…own a emon service (26s / 5min 1s) [ *** ] A stop job is running for LSB: star…own a emon service (26s / 5min 1s) [*** ] A stop job is running for LSB: star…own a emon service (27s / 5min 1s) [** ] A stop job is running for LSB: star…own a emon service (27s / 5min 1s) [* ] A stop job is running for LSB: star…own a emon service (28s / 5min 1s) [** ] A stop job is running for LSB: star…own a emon service (28s / 5min 1s) [*** ] A stop job is running for LSB: star…own a emon service (29s / 5min 1s) [ *** ] A stop job is running for LSB: star…own a emon service (29s / 5min 1s) [ *** ] A stop job is running for LSB: star…own a emon service (30s / 5min 1s) [ ***] A stop job is running for LSB: star…own a emon service (30s / 5min 1s) [ **] A stop job is running for LSB: star…own a emon service (31s / 5min 1s) [ *] A stop job is running for LSB: star…own a emon service (31s / 5min 1s) [ **] A stop job is running for LSB: star…own a emon service (32s / 5min 1s) [ ***] A stop job is running for LSB: star…own a emon service (32s / 5min 1s) [ *** ] A stop job is running for LSB: star…own a emon service (33s / 5min 1s) [ *** ] A stop job is running for LSB: star…own a emon service (33s / 5min 1s) [*** ] A stop job is running for LSB: star…own a emon service (34s / 5min 1s) [** ] A stop job is running for LSB: star…own a emon service (34s / 5min 1s) [ OK ] Stopped LSB: startup and shutdown a emon service. Stopping Mosquitto MQTT v3.1/v3.1.1 Broker... [ OK ] Stopped Mosquitto MQTT v3.1/v3.1.1 Broker. [ OK ] Stopped target Basic System. [ OK ] Stopped target Paths. [ OK ] Stopped Monitor directories with device templates for wb-mqtt-serial. [ OK ] Stopped target Sockets. [ OK ] Closed KNX Daemon (socket). [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Closed Syslog Socket. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Stopped target System Initialization. [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped target Encrypted Volumes. [ OK ] Stopped Forward Password Requests to Wall Directory Watch. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [ OK ] Stopped target Swap. Deactivating swap /dev/disk/by-uuid…204-0c87-46e0-80c3-5bb645a93041... [ OK ] Stopped Load Kernel Modules. [ OK ] Stopped target Local File Systems. Unmounting /run/user/0... Stopping Update UTMP about System Boot/Shutdown... Stopping Load/Save Random Seed... [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Remote File Systems. [ OK ] Deactivated swap /dev/disk/by-uuid/…b9204-0c87-46e0-80c3-5bb645a93041. [ OK ] Deactivated swap /dev/disk/by-path/platform-2194000.mmc-part5. [ OK ] Deactivated swap /dev/disk/by-partuuid/0697d5ec-05. [ OK ] Deactivated swap /dev/mmcblk0p5. [ OK ] Unmounted /run/user/0. [ OK ] Stopped Load/Save Random Seed. [ OK ] Stopped Update UTMP about System Boot/Shutdown. Unmounting /var/log... [FAILED] Failed unmounting /var/log. Unmounting /mnt/data... [ OK ] Unmounted /mnt/data. [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped File System Check on /dev/mmcblk0p6. [ OK ] Removed slice system-systemd\x2dfsck.slice. [ OK ] Stopped target Local File Systems (Pre). [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped prepare partitions at first boot. [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Reached target Shutdown. [ 217.326603] watchdog: watchdog0: watchdog did not stop! [ 217.352057] printk: systemd-shutdow: 25 output lines suppressed due to ratelimiting [ 217.449836] systemd-shutdown[1]: Sending SIGTERM to remaining processes... [ 217.479880] systemd-journald[104]: Received SIGTERM from PID 1 (systemd-shutdow). [ 217.536772] systemd-shutdown[1]: Sending SIGKILL to remaining processes... [ 217.590746] systemd-shutdown[1]: Hardware watchdog 'imx2+ watchdog', version 0 [ 217.615725] systemd-shutdown[1]: Unmounting file systems. [ 217.623382] systemd-shutdown[1]: Remounting '/var/log' read-only with options ''. [ 217.654527] EXT4-fs (mmcblk0p6): re-mounted. Opts: [ 217.664448] systemd-shutdown[1]: Unmounting /var/log. [ 217.802479] systemd-shutdown[1]: Remounting '/' read-only with options 'errors=remount-ro'. [ 217.834330] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro [ 217.856532] systemd-shutdown[1]: Remounting '/' read-only with options 'errors=remount-ro'. [ 217.865294] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro [ 217.872158] systemd-shutdown[1]: Remounting '/' read-only with options 'errors=remount-ro'. [ 217.880830] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro [ 217.887448] systemd-shutdown[1]: All filesystems unmounted. [ 217.917200] ci_hdrc ci_hdrc.0: remove, state 4 [ 217.921761] usb usb1: USB disconnect, device number 1 [ 217.927848] ci_hdrc ci_hdrc.0: USB bus 1 deregistered [ 217.967149] ci_hdrc ci_hdrc.1: remove, state 1 [ 217.971633] usb usb2: USB disconnect, device number 1 [ 217.976796] usb 2-1: USB disconnect, device number 2 [ 217.981829] usb 2-1.1: USB disconnect, device number 3 [ 217.989158] RTL871X: rtw_ndev_uninit(wlan0) [ 217.994740] RTL871X: rtw_ndev_uninit(wlan1) [ 218.000066] RTL871X: rtw_cmd_thread: DriverStopped(1) SurpriseRemoved(1) break at line 452 [ 218.008466] RTL871X: rtw_dev_unload: driver in IPS-FWLPS [ 218.015806] usb 2-1.3: USB disconnect, device number 5 [ 218.021141] rndis_host 2-1.3:1.0 usb0: unregister 'rndis_host' usb-ci_hdrc.1-1.3, RNDIS device [ 218.031542] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 218.039708] option 2-1.3:1.2: device disconnected [ 218.045134] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 218.053274] option 2-1.3:1.4: device disconnected [ 218.058652] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 218.066841] option 2-1.3:1.5: device disconnected [ 218.076588] ci_hdrc ci_hdrc.1: USB bus 2 deregistered [ 218.081961] imx2-wdt 20bc000.watchdog: Device shutdown: Expect reboot! [ 218.088545] reboot: Restarting system U-Boot SPL 2017.03-1.2.0-gf92dee6f51 (Jun 02 2021 - 13:45:31) DRAM init ok, rows:16, ncs:1, size: 1024MB Trying to boot from MMC1 Warning - USDHC2 controller not supporting U-Boot 2017.03-1.2.0-gf92dee6f51 (Jun 02 2021 - 13:45:31 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 52C Reset cause: WDOG Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 1 GiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 3  2  1  0 Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found No storage devices, perhaps not 'usb start'ed..? No USB update detected, continuing boot switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 324 bytes read in 69 ms (3.9 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 5899176 bytes read in 392 ms (14.4 MiB/s) MMC read: dev # 0, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt imx6ul-wirenboard680 46902 bytes read in 143 ms (319.3 KiB/s) 485 bytes read in 153 ms (2.9 KiB/s) Applying DT overlay wb6-nogsm 597 bytes read in 146 ms (3.9 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu 509 bytes read in 175 ms (2 KiB/s) Applying DT overlay wb6-noradio 334 bytes read in 113 ms (2 KiB/s) Applying DT overlay wb6-eth1 254 bytes read in 127 ms (2 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to bef4b000, end bef6dfff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb111 (jenkins@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 6.3.0-18) 6.3.0 20170516, GNU ld (GNU Binutils for Debian) 2.28) #1 Wed Apr 20 13:39:52 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 6.8.0 (i.MX6UL/ULL) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 259840 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1008680K/1048576K available (8192K kernel code, 714K rwdata, 2680K rodata, 1024K init, 272K bss, 23512K reserved, 16384K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x238/0x3d4 with crng_init=0 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000062] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002864] Console: colour dummy device 80x30 [ 0.002933] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002975] pid_max: default: 32768 minimum: 301 [ 0.003420] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003466] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005083] CPU: Testing write buffer coherency: ok [ 0.006194] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.007219] devtmpfs: initialized [ 0.025504] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.026037] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.026084] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.027455] pinctrl core: initialized pinctrl subsystem [ 0.029527] NET: Registered protocol family 16 [ 0.031885] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.033937] thermal_sys: Registered thermal governor 'step_wise' [ 0.034229] cpuidle: using governor menu [ 0.230983] vdd1p1: supplied by regulator-dummy [ 0.243600] vdd3p0: supplied by regulator-dummy [ 0.256220] cpu: supplied by regulator-dummy [ 0.268818] vddsoc: supplied by regulator-dummy [ 0.629809] No ATAGs? [ 0.629873] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.629896] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.630514] debugfs: Directory 'dummy-iomuxc-gpr@20e4000' with parent 'regmap' already present! [ 0.631185] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.632656] imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000 [ 0.632695] imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl driver [ 0.674055] mxs-dma 1804000.dma-apbh: initialized [ 0.679414] SCSI subsystem initialized [ 0.679928] usbcore: registered new interface driver usbfs [ 0.680064] usbcore: registered new interface driver hub [ 0.680180] usbcore: registered new device driver usb [ 0.681042] gpio-48 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.681172] gpio-49 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.682552] i2c-gpio i2c_rtc: using lines 48 (SDA) and 49 (SCL) [ 0.683529] gpio-76 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.683662] gpio-67 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.684272] i2c-gpio i2c_eeprom1: using lines 76 (SDA) and 67 (SCL) [ 0.684988] gpio-70 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.685116] gpio-71 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.685728] i2c-gpio i2c_eeprom2: using lines 70 (SDA) and 71 (SCL) [ 0.687334] gpio-30 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.687709] i2c i2c-1: IMX I2C adapter registered [ 0.688456] mc: Linux media interface: v0.10 [ 0.688577] videodev: Linux video capture interface: v2.00 [ 0.688724] pps_core: LinuxPPS API ver. 1 registered [ 0.688748] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.688821] PTP clock support registered [ 0.689459] Advanced Linux Sound Architecture Driver Initialized. [ 0.691652] clocksource: Switched to clocksource mxc_timer1 [ 0.709874] NET: Registered protocol family 2 [ 0.711074] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.711193] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.711393] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.711585] TCP: Hash tables configured (established 8192 bind 8192) [ 0.711951] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.712026] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.712397] NET: Registered protocol family 1 [ 0.713336] RPC: Registered named UNIX socket transport module. [ 0.713371] RPC: Registered udp transport module. [ 0.713392] RPC: Registered tcp transport module. [ 0.713408] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.714629] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.717562] Initialise system trusted keyrings [ 0.718026] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.729848] NFS: Registering the id_resolver key type [ 0.729930] Key type id_resolver registered [ 0.729950] Key type id_legacy registered [ 0.730891] Key type asymmetric registered [ 0.730930] Asymmetric key parser 'x509' registered [ 0.731038] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.731065] io scheduler mq-deadline registered [ 0.731087] io scheduler kyber registered [ 0.743590] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.743642] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.747653] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 21, base_baud = 5000000) is a IMX [ 1.410867] printk: console [ttymxc0] enabled [ 1.417418] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59, base_baud = 5000000) is a IMX [ 1.461317] imx_rngc 2284000.rng: Freescale RNGB registered (HW revision 2.129) [ 1.468760] random: fast init done [ 1.472737] random: crng init done [ 1.512522] brd: module loaded [ 1.530455] loop: module loaded [ 1.534096] at24 5-0050: supply vcc not found, using dummy regulator [ 1.545564] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.552585] at24 6-0050: supply vcc not found, using dummy regulator [ 1.563986] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.576548] libphy: Fixed MDIO Bus: probed [ 1.583801] pps pps0: new PPS source ptp0 [ 1.624639] libphy: fec_enet_mii_bus: probed [ 1.629949] fec 20b4000.ethernet eth0: registered PHC device 0 [ 1.752350] pps pps1: new PPS source ptp1 [ 1.759219] libphy: fec_enet_mii_bus: probed [ 1.768069] fec 2188000.ethernet eth1: registered PHC device 1 [ 1.774927] PPP generic driver version 2.4.2 [ 1.779661] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.786313] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.792100] usbcore: registered new interface driver usb-storage [ 1.798355] usbcore: registered new interface driver usbserial_generic [ 1.805044] usbserial: USB Serial support registered for generic [ 1.854506] rtc rtc0: invalid alarm value: 2022-08-28T33:00:00 [ 1.860794] rtc-pcf8563 4-0051: registered as rtc0 [ 1.877627] rtc-pcf8563 4-0051: setting system clock to 2022-08-11T08:30:03 UTC (1660206603) [ 1.896394] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc1 [ 1.902938] i2c /dev entries driver [ 1.909792] lm75 4-0048: supply vs not found, using dummy regulator [ 1.921455] lm75 4-0048: hwmon0: sensor 'lm75b' [ 2.042091] sdhci: Secure Digital Host Controller Interface driver [ 2.048303] sdhci: Copyright(c) Pierre Ossman [ 2.052725] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.066684] ledtrig-cpu: registered to indicate activity on CPUs [ 2.074585] usbcore: registered new interface driver usbhid [ 2.080189] usbhid: USB HID core driver [ 2.096773] NET: Registered protocol family 10 [ 2.101365] mmc0: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 2.111373] Segment Routing with IPv6 [ 2.115905] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.123926] NET: Registered protocol family 17 [ 2.128697] Key type dns_resolver registered [ 2.137557] registered taskstats version 1 [ 2.141802] Loading compiled-in X.509 certificates [ 2.164101] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 2.176012] of_cfs_init [ 2.178777] of_cfs_init: OK [ 2.186671] ALSA device list: [ 2.189673] No soundcards found. [ 2.193480] Waiting for root device /dev/mmcblk0p3... [ 2.203194] mmc0: new DDR MMC card at address 0001 [ 2.208906] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 2.213973] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 2.220260] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 2.226603] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB, chardev (245:0) [ 2.237219] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.260124] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.268662] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 2.280341] devtmpfs: mounted [ 2.287351] Freeing unused kernel memory: 1024K [ 2.292793] Run /sbin/init as init process [ 2.648742] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.668086] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 2.718815] systemd[1]: Set hostname to . [ 3.349300] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 3.405430] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 3.442033] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 3.474012] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 3.512619] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 3.568617] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 3.606651] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st…ce nodes for the current kernel... Mounting /sys/kernel/config... [ OK ] Listening on udev Control Socket. [ OK ] Listening on Syslog Socket. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on Journal Socket (/dev/log). Starting Journal Service... Mounting POSIX Message Queue File System... [ OK ] Created slice system-serial\x2dgetty.slice. Starting Nameserver information manager... Mounting Debug File System... [ OK ] Listening on fsck to fsckd communication Socket. Starting File System Check on Root Device... [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Encrypted Volumes. [ OK ] Created slice system-systemd\x2dfsck.slice. [ OK ] Listening on udev Kernel Socket. [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Mounted /sys/kernel/config. [ OK ] Started Journal Service. [ OK ] Started Load Kernel Modules. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started File System Check on Root Device. [ OK ] Started Nameserver information manager. [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... [ 4.718895] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro [ OK ] Started Remount Root and Kernel File Systems. Starting Load/Save Random Seed... Starting udev Coldplug all Devices... Starting prepare partitions at first boot... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ OK ] Started Load/Save Random Seed. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. [ OK ] Started prepare partitions at first boot. [ OK ] Reached target Local File Systems (Pre). [ 6.906564] Driver for 1-wire Dallas network protocol. [ OK ] Started udev Coldplug all Devices. [ 6.984509] gpio-68 (onewire_w1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 7.060675] gpio-11 (onewire_w2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ OK ] Found device /dev/ttymxc0. [ 7.502329] fec 20b4000.ethernet rename2: renamed from eth0 [ 7.916237] fec 2188000.ethernet eth0: renamed from eth1 [ 7.953486] imx_usb 2184000.usb: No over current polarity defined [ 7.984087] fec 20b4000.ethernet eth1: renamed from rename2 [ 8.066421] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 8.071373] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 8.241749] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 8.267525] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 8.275896] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.283157] usb usb1: Product: EHCI Host Controller [ 8.288043] usb usb1: Manufacturer: Linux 5.10.35-wb111 ehci_hcd [ 8.294086] usb usb1: SerialNumber: ci_hdrc.0 [ 8.612125] hub 1-0:1.0: USB hub found [ 8.681349] hub 1-0:1.0: 1 port detected [ 8.714488] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 8.719443] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 8.881811] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 8.912948] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 8.921241] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.928553] usb usb2: Product: EHCI Host Controller [ 8.933473] usb usb2: Manufacturer: Linux 5.10.35-wb111 ehci_hcd [ 8.939485] usb usb2: SerialNumber: ci_hdrc.1 [ OK ] Found device /dev/mmcblk0p5. [ 9.061827] usb usb1-port1: over-current condition [ OK ] Found device /dev/mmcblk0p6. [ 9.200199] hub 2-0:1.0: USB hub found [ 9.234503] hub 2-0:1.0: 1 port detected Starting File System Check on /dev/mmcblk0p6... Activating swap /dev/mmcblk0p5... [ 9.631756] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 9.742625] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SS [ OK ] Activated swap /dev/mmcblk0p5. [ 9.882420] usb 2-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 9.890648] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ OK ] Reached target Swap. [ 9.944293] hub 2-1:1.0: USB hub found [ 9.948959] hub 2-1:1.0: 4 ports detected [ OK ] Started File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 10.140759] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ 10.281713] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc Starting Flush Journal to Persistent Storage... [ OK ] Reached target Local File Systems. Starting prepare mounts and symlinks to config files... Starting Raise network interfaces... [ 10.433281] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00 [ 10.441725] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.449068] usb 2-1.1: Product: 802.11n WLAN Adapter [ 10.454102] usb 2-1.1: Manufacturer: Realtek [ 10.458378] usb 2-1.1: SerialNumber: 00e04c000001 [ 10.539342] systemd-journald[102]: Received request to flush runtime journal from PID 1 [ OK ] Started Raise network interfaces. [ 10.948377] Bluetooth: Core ver 2.22 [ 10.953899] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 11.004909] NET: Registered protocol family 31 [ 11.009428] Bluetooth: HCI device and connection manager initialized [ 11.101788] Bluetooth: HCI socket layer initialized [ 11.106701] Bluetooth: L2CAP socket layer initialized [ 11.167011] Bluetooth: SCO socket layer initialized [ 11.189376] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Starting Load/Save RF Kill Switch Status... [ 11.284452] usbcore: registered new interface driver btusb [ 11.302992] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 11.314476] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 11.320572] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 11.333356] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 11.339865] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 11.349181] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 11.463951] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 11.494992] cfg80211: failed to load regulatory.db [ OK ] Started Load/Save RF Kill Switch Status. [ 12.183210] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ OK ] Started Flush Journal to Persistent Storage. [ 12.319994] RTL871X: module init start [ 12.323859] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 [ 12.330840] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ 12.532011] SMSC LAN8710/LAN8720 2188000.ethernet-2:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet-2:00, irq=POLL) [ 12.654745] RTL871X: rtw_ndev_init(wlan0) [ 12.679074] RTL871X: rtw_ndev_init(wlan1) [ 12.705542] usbcore: registered new interface driver rtl8723bu [ 12.711406] RTL871X: module init ret=0 [ 12.890983] usbcore: registered new interface driver rtl8xxxu [ OK ] Started prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. [ OK ] Reached target System Time Synchronized. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Listening on KNX Daemon (socket). [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started Monitor directories with device templates for wb-mqtt-serial. [ OK ] Reached target Paths. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started watch config files. [ OK ] Started Cgroup management daemon. [ OK ] Started Regular background program processing daemon. [ 14.652223] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ OK ] Started Generates wb-mqtt-serial UI schema for wb-mqtt-confed. [ 14.716391] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Starting Restore local date from Wiren Board GSM RTC... [ 14.770320] new mount options do not match the existing superblock, will be ignored Starting Mosquitto MQTT v3.1/v3.1.1 Broker... Starting System Logging Service... Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Bluetooth service. [ OK ] Reached target Bluetooth. [ 15.644895] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.650234] Bluetooth: BNEP filters: protocol multicast Starting Initialize Wiren Board Device Tree overlays... Starting initialize filesystems at first boot... [ 15.720245] Bluetooth: BNEP socket layer initialized Starting Login Service... [ OK ] Started System Logging Service. [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ OK ] Started Mosquitto MQTT v3.1/v3.1.1 Broker. [ OK ] Started Login Service. Starting Hostname Service... [ OK ] Started Wiren Board configuration editor backend. Starting Wiren Board MQTT to Modbus TCP gateway... [ OK ] Started Wiren Board firmware update service. Starting Wiren Board MQTT to OPC UA gateway... Starting LSB: startup and shutdown a emon service... [ OK ] Started Hostname Service. [ OK ] Started Wiren Board MQTT to OPC UA gateway. [ OK ] Started initialize filesystems at first boot. [ OK ] Reached target Network. Starting Permit User Sessions... Starting OpenBSD Secure Shell server... Starting dnsmasq - A lightweight DHCP and caching DNS server... [ OK ] Started Wiren Board journald to MQTT gateway. Starting KNX Daemon... Starting A high performance web server and a reverse proxy server... Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started LSB: startup and shutdown a emon service. [ OK ] Started Permit User Sessions. [ OK ] Started KNX Daemon. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Reached target Network is Online. Starting LSB: Start zabbix-agent daemon... Starting LSB: Start NTP daemon... Starting LSB: Brings up/down network automatically... Starting LSB: Advanced IEEE 802.11 management daemon... [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttymxc0. [ OK ] Reached target Login Prompts. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Wiren Board MQTT to Modbus TCP gateway. [ 24.503972] process '/sbin/netplugd' started with executable stack [ OK ] Started LSB: Start NTP daemon. [ 25.184510] Micrel KSZ8081 or KSZ8091 2188000.ethernet-2:03: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet-2:03, irq=POLL) Starting Compensation of systime in…evice-tree (with opposite sign)... [ OK ] Started LSB: Start zabbix-agent daemon. [ OK ] Started Compensation of systime in … device-tree (with opposite sign). Debian GNU/Linux 9 WB6-AKSYATYY ttymxc0 WB6-AKSYATYY login: [ 28.412760] RTL871X: RTW_ADAPTIVITY_EN_ [ 28.412786] AUTO, chplan:0x20, Regulation:3,3 [ 28.421022] RTL871X: RTW_ADAPTIVITY_MODE_ [ 28.421026] NORMAL [ 28.526040] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 224, base_baud = 5000000) is a IMX [ 31.483050] RTL871X: assoc success [ 31.486562] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 32.206920] 2288000.serial: ttymxc7 at MMIO 0x2288000 (irq = 225, base_baud = 5000000) is a IMX [ 33.334532] gpio-19 (wbmz2_i2c_0): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 33.448963] gpio-18 (wbmz2_i2c_0): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 35.196269] i2c-gpio wbmz2_i2c_0: using lines 19 (SDA) and 18 (SCL) [ 54.471768] usb 2-1.3: new high-speed USB device number 4 using ci_hdrc [ 54.746792] usb 2-1.3: New USB device found, idVendor=1286, idProduct=812a, bcdDevice= 0.00 [ 54.755254] usb 2-1.3: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 54.762652] usb 2-1.3: Product: WUKONG [ 54.766416] usb 2-1.3: Manufacturer: MARVELL [ 55.008225] usb 2-1.3: can't set config #1, error -71 [ 55.122905] usb 2-1.3: USB disconnect, device number 4 [ 61.121814] usb 2-1.3: new high-speed USB device number 5 using ci_hdrc [ 61.362427] usb 2-1.3: config 1 has an invalid interface number: 5 but max is 4 [ 61.369803] usb 2-1.3: config 1 has no interface number 3 [ 61.561775] usb 2-1.3: New USB device found, idVendor=1e0e, idProduct=9011, bcdDevice= 1.00 [ 61.570188] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 61.577584] usb 2-1.3: Product: Mobile Composite Device Bus [ 61.583200] usb 2-1.3: Manufacturer: Marvell [ 61.587475] usb 2-1.3: SerialNumber: 200806006809080000 [ 62.588274] usbcore: registered new interface driver option [ 62.644759] usbcore: registered new interface driver cdc_ether [ 62.844457] rndis_host 2-1.3:1.0 usb0: register 'rndis_host' at usb-ci_hdrc.1-1.3, RNDIS device, 62:a0:3e:83:40:e6 [ 62.894651] usbserial: USB Serial support registered for GSM modem (1-port) [ 63.060897] option 2-1.3:1.2: GSM modem (1-port) converter detected [ 63.077965] usbcore: registered new interface driver rndis_host [ 63.124834] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 63.322742] option 2-1.3:1.4: GSM modem (1-port) converter detected [ 63.438058] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 63.602037] option 2-1.3:1.5: GSM modem (1-port) converter detected [ 63.742696] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB2 root Password: [ 97.363673] PPP BSD Compression module registered [ 97.432406] PPP Deflate Compression module registered Last login: Thu Aug 11 08:27:28 UTC 2022 from 192.168.44.1 on pts/0  _ _ _ __ _(_)_ __ ___ _ __ | |__ ___ __ _ _ __ __| | \ \ /\ / / | '__/ _ \ '_ \| '_ \ / _ \ / _` | '__/ _` | \ V V /| | | | __/ | | | |_) | (_) | (_| | | | (_| | \_/\_/ |_|_| \___|_| |_|_.__/ \___/ \__,_|_| \__,_| Welcome to Wiren Board 6.8.2 (s/n AKSYATYY), release wb-2204 (as stable) Linux WB6-AKSYATYY 5.10.35-wb111 #1 Wed Apr 20 13:39:52 UTC 2022 armv7l GNU/Linux root@WB6-AKSYATYY:~# rebootip als -lA /dev/ttyGSM* lrwxrwxrwx 1 root root 12 Aug 11 08:31 /dev/ttyGSM -> /dev/ttyGSM0 lrwxrwxrwx 1 root root 12 Aug 11 08:31 /dev/ttyGSM0 -> /dev/ttyUSB1 lrwxrwxrwx 1 root root 12 Aug 11 08:31 /dev/ttyGSM1 -> /dev/ttyUSB2 root@WB6-AKSYATYY:~# exit logout Debian GNU/Linux 9 WB6-AKSYATYY ttymxc0 WB6-AKSYATYY login: [ 134.047364] usb 2-1: USB disconnect, device number 2 U-Boot SPL 2017.03-1.2.0-gf92dee6f51 (Jun 02 2021 - 13:45:31) DRAM init ok, rows:16, ncs:1, size: 1024MB Trying to boot from MMC1 Warning - USDHC2 controller not supporting U-Boot 2017.03-1.2.0-gf92dee6f51 (Jun 02 2021 - 13:45:31 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 51C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 1 GiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 3  2  1  0 Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found No storage devices, perhaps not 'usb start'ed..? No USB update detected, continuing boot switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 324 bytes read in 69 ms (3.9 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 5899176 bytes read in 392 ms (14.4 MiB/s) MMC read: dev # 0, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt imx6ul-wirenboard680 46902 bytes read in 143 ms (319.3 KiB/s) 485 bytes read in 153 ms (2.9 KiB/s) Applying DT overlay wb6-nogsm 597 bytes read in 146 ms (3.9 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu 509 bytes read in 175 ms (2 KiB/s) Applying DT overlay wb6-noradio 334 bytes read in 113 ms (2 KiB/s) Applying DT overlay wb6-eth1 254 bytes read in 126 ms (2 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to bef4b000, end bef6dfff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb111 (jenkins@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 6.3.0-18) 6.3.0 20170516, GNU ld (GNU Binutils for Debian) 2.28) #1 Wed Apr 20 13:39:52 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 6.8.0 (i.MX6UL/ULL) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 259840 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1008680K/1048576K available (8192K kernel code, 714K rwdata, 2680K rodata, 1024K init, 272K bss, 23512K reserved, 16384K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x238/0x3d4 with crng_init=0 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000018] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000060] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002862] Console: colour dummy device 80x30 [ 0.002931] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002972] pid_max: default: 32768 minimum: 301 [ 0.003421] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003464] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005080] CPU: Testing write buffer coherency: ok [ 0.006181] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.007210] devtmpfs: initialized [ 0.025421] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.025940] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.025989] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.027367] pinctrl core: initialized pinctrl subsystem [ 0.029425] NET: Registered protocol family 16 [ 0.031776] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.033831] thermal_sys: Registered thermal governor 'step_wise' [ 0.034125] cpuidle: using governor menu [ 0.230976] vdd1p1: supplied by regulator-dummy [ 0.243586] vdd3p0: supplied by regulator-dummy [ 0.256204] cpu: supplied by regulator-dummy [ 0.268784] vddsoc: supplied by regulator-dummy [ 0.629577] No ATAGs? [ 0.629640] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.629663] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.630284] debugfs: Directory 'dummy-iomuxc-gpr@20e4000' with parent 'regmap' already present! [ 0.630953] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.632409] imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000 [ 0.632450] imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl driver [ 0.673771] mxs-dma 1804000.dma-apbh: initialized [ 0.679140] SCSI subsystem initialized [ 0.679652] usbcore: registered new interface driver usbfs [ 0.679780] usbcore: registered new interface driver hub [ 0.679891] usbcore: registered new device driver usb [ 0.680744] gpio-48 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.680878] gpio-49 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.682255] i2c-gpio i2c_rtc: using lines 48 (SDA) and 49 (SCL) [ 0.683160] gpio-76 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.683294] gpio-67 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.683979] i2c-gpio i2c_eeprom1: using lines 76 (SDA) and 67 (SCL) [ 0.684705] gpio-70 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.684836] gpio-71 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.685439] i2c-gpio i2c_eeprom2: using lines 70 (SDA) and 71 (SCL) [ 0.687035] gpio-30 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.687410] i2c i2c-1: IMX I2C adapter registered [ 0.688155] mc: Linux media interface: v0.10 [ 0.688277] videodev: Linux video capture interface: v2.00 [ 0.688423] pps_core: LinuxPPS API ver. 1 registered [ 0.688447] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.688514] PTP clock support registered [ 0.689153] Advanced Linux Sound Architecture Driver Initialized. [ 0.691368] clocksource: Switched to clocksource mxc_timer1 [ 0.709491] NET: Registered protocol family 2 [ 0.710692] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.710810] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.711011] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.711203] TCP: Hash tables configured (established 8192 bind 8192) [ 0.711574] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.711653] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.712021] NET: Registered protocol family 1 [ 0.712950] RPC: Registered named UNIX socket transport module. [ 0.712986] RPC: Registered udp transport module. [ 0.713006] RPC: Registered tcp transport module. [ 0.713025] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.714240] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.717167] Initialise system trusted keyrings [ 0.717617] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.729430] NFS: Registering the id_resolver key type [ 0.729517] Key type id_resolver registered [ 0.729537] Key type id_legacy registered [ 0.730466] Key type asymmetric registered [ 0.730502] Asymmetric key parser 'x509' registered [ 0.730611] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.730638] io scheduler mq-deadline registered [ 0.730660] io scheduler kyber registered [ 0.743097] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.743147] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.747134] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 21, base_baud = 5000000) is a IMX [ 1.410343] printk: console [ttymxc0] enabled [ 1.416891] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59, base_baud = 5000000) is a IMX [ 1.460772] imx_rngc 2284000.rng: Freescale RNGB registered (HW revision 2.129) [ 1.468213] random: fast init done [ 1.472190] random: crng init done [ 1.511978] brd: module loaded [ 1.529919] loop: module loaded [ 1.533559] at24 5-0050: supply vcc not found, using dummy regulator [ 1.544986] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.552003] at24 6-0050: supply vcc not found, using dummy regulator [ 1.563410] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.575974] libphy: Fixed MDIO Bus: probed [ 1.583192] pps pps0: new PPS source ptp0 [ 1.624186] libphy: fec_enet_mii_bus: probed [ 1.629493] fec 20b4000.ethernet eth0: registered PHC device 0 [ 1.752067] pps pps1: new PPS source ptp1 [ 1.758849] libphy: fec_enet_mii_bus: probed [ 1.767679] fec 2188000.ethernet eth1: registered PHC device 1 [ 1.774546] PPP generic driver version 2.4.2 [ 1.779287] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.785938] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.791745] usbcore: registered new interface driver usb-storage [ 1.798000] usbcore: registered new interface driver usbserial_generic [ 1.804683] usbserial: USB Serial support registered for generic [ 1.854114] rtc rtc0: invalid alarm value: 2022-08-28T33:00:00 [ 1.860398] rtc-pcf8563 4-0051: registered as rtc0 [ 1.877230] rtc-pcf8563 4-0051: setting system clock to 2022-08-11T08:32:37 UTC (1660206757) [ 1.896019] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc1 [ 1.902563] i2c /dev entries driver [ 1.909401] lm75 4-0048: supply vs not found, using dummy regulator [ 1.921067] lm75 4-0048: hwmon0: sensor 'lm75b' [ 2.041679] sdhci: Secure Digital Host Controller Interface driver [ 2.047892] sdhci: Copyright(c) Pierre Ossman [ 2.052312] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.066274] ledtrig-cpu: registered to indicate activity on CPUs [ 2.074160] usbcore: registered new interface driver usbhid [ 2.079762] usbhid: USB HID core driver [ 2.096323] NET: Registered protocol family 10 [ 2.100915] mmc0: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 2.110910] Segment Routing with IPv6 [ 2.115430] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.123476] NET: Registered protocol family 17 [ 2.128250] Key type dns_resolver registered [ 2.137083] registered taskstats version 1 [ 2.141268] Loading compiled-in X.509 certificates [ 2.163672] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 2.175591] of_cfs_init [ 2.178355] of_cfs_init: OK [ 2.186247] ALSA device list: [ 2.189253] No soundcards found. [ 2.193062] Waiting for root device /dev/mmcblk0p3... [ 2.202676] mmc0: new DDR MMC card at address 0001 [ 2.208388] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 2.213452] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 2.219748] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 2.226090] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB, chardev (245:0) [ 2.236704] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.258737] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem [ 2.266152] EXT4-fs (mmcblk0p3): write access will be enabled during recovery [ 3.193688] EXT4-fs (mmcblk0p3): recovery complete [ 3.201693] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 3.210018] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 3.218548] devtmpfs: mounted [ 3.232237] Freeing unused kernel memory: 1024K [ 3.238395] Run /sbin/init as init process [ 3.591271] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 3.610378] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 3.655930] systemd[1]: Set hostname to . [ 4.282148] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 4.347383] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 4.381832] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 4.415568] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 4.463305] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 4.480591] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.499064] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Created slice User and Session Slice. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Created slice system-serial\x2dgetty.slice. Mounting /sys/kernel/config... [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Created slice system-getty.slice. [ OK ] Listening on Journal Socket. Starting Journal Service... Starting File System Check on Root Device... Starting Create list of required st…ce nodes for the current kernel... Starting Nameserver information manager... [ OK ] Created slice system-systemd\x2dfsck.slice. [ OK ] Reached target Slices. Mounting Debug File System... [ OK ] Reached target Encrypted Volumes. [ OK ] Listening on udev Control Socket. Starting Load Kernel Modules... [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Mounted /sys/kernel/config. [ OK ] Started File System Check on Root Device. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Load Kernel Modules. [ OK ] Started Nameserver information manager. [ OK ] Started Journal Service. [ OK ] Started File System Check Daemon to report status. Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... Starting Remount Root and Kernel File Systems... [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. [ 5.722883] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro Starting udev Kernel Device Manager... [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Load/Save Random Seed... Starting prepare partitions at first boot... [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Kernel Device Manager. [ OK ] Started prepare partitions at first boot. [ OK ] Reached target Local File Systems (Pre). [ OK ] Started udev Coldplug all Devices. [ 7.887418] Driver for 1-wire Dallas network protocol. [ 7.957541] gpio-68 (onewire_w1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 8.048787] gpio-11 (onewire_w2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ OK ] Found device /dev/ttymxc0. [ 8.395202] fec 20b4000.ethernet rename2: renamed from eth0 [ 8.784612] fec 2188000.ethernet eth0: renamed from eth1 [ 8.813822] imx_usb 2184000.usb: No over current polarity defined [ 8.852063] fec 20b4000.ethernet eth1: renamed from rename2 [ 8.913415] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 8.977692] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 9.141534] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 9.185432] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 9.193784] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.201015] usb usb1: Product: EHCI Host Controller [ 9.205934] usb usb1: Manufacturer: Linux 5.10.35-wb111 ehci_hcd [ 9.211988] usb usb1: SerialNumber: ci_hdrc.0 [ 9.511742] hub 1-0:1.0: USB hub found [ 9.563750] hub 1-0:1.0: 1 port detected [ 9.626475] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 9.688915] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 9.771530] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 9.797288] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 9.805651] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.812914] usb usb2: Product: EHCI Host Controller [ 9.817800] usb usb2: Manufacturer: Linux 5.10.35-wb111 ehci_hcd [ 9.823852] usb usb2: SerialNumber: ci_hdrc.1 [ OK ] Found device /dev/mmcblk0p5. [ 9.961538] usb usb1-port1: over-current condition [ OK ] Found device /dev/mmcblk0p6. [ 10.034979] hub 2-0:1.0: USB hub found [ 10.078006] hub 2-0:1.0: 1 port detected [ 10.471516] usb 2-1: new high-speed USB device number 2 using ci_hdrc Starting File System Check on /dev/mmcblk0p6... Activating swap /dev/mmcblk0p5... [ 10.641062] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SS [ 10.702089] usb 2-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 10.710316] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ OK ] Activated swap /dev/mmcblk0p5. [ 10.770658] hub 2-1:1.0: USB hub found [ OK ] Reached target Swap. [ 10.800438] hub 2-1:1.0: 4 ports detected [ OK ] Started File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 11.149559] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ 11.157863] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. [ 11.323092] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00 [ 11.331567] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.338954] usb 2-1.1: Product: 802.11n WLAN Adapter [ 11.343994] usb 2-1.1: Manufacturer: Realtek [ 11.348284] usb 2-1.1: SerialNumber: 00e04c000001 Starting prepare mounts and symlinks to config files... Starting Raise network interfaces... Starting Flush Journal to Persistent Storage... [ 11.737681] Bluetooth: Core ver 2.22 [ 11.754095] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 11.764652] systemd-journald[101]: Received request to flush runtime journal from PID 1 [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 11.781961] NET: Registered protocol family 31 [ 11.786460] Bluetooth: HCI device and connection manager initialized [ 11.814540] Bluetooth: HCI socket layer initialized [ 11.823137] systemd-journald[101]: File /var/log/journal/4718d444e2911fd1dead61ff62163b04/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 11.853319] Bluetooth: L2CAP socket layer initialized [ 11.871684] Bluetooth: SCO socket layer initialized [ 11.932910] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 11.962874] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 11.985762] usbcore: registered new interface driver btusb Starting Load/Save RF Ki[ 12.005725] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 ll Switch Status... [ 12.017674] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 12.023793] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 12.035234] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 12.041824] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 12.051023] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 12.115279] cfg80211: failed to load regulatory.db [ OK ] Started Load/Save RF Kill Switch Status. [ 12.875694] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ OK ] Started Flush Journal to Persistent Storage. [ 13.068201] RTL871X: module init start [ 13.072069] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 [ 13.079036] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ 13.308309] RTL871X: rtw_ndev_init(wlan0) [ 13.326385] RTL871X: rtw_ndev_init(wlan1) [ 13.349337] usbcore: registered new interface driver rtl8723bu [ 13.355275] RTL871X: module init ret=0 [ 13.483310] usbcore: registered new interface driver rtl8xxxu [ OK ] Started Raise network interfaces. [ OK ] Started prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. [ OK ] Reached target System Time Synchronized. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Started Monitor directories with device templates for wb-mqtt-serial. [ OK ] Reached target Paths. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Restore local date from Wiren Board GSM RTC... Starting Mosquitto MQTT v3.1/v3.1.1 Broker... [ OK ] Started Generates wb-mqtt-serial UI schema for wb-mqtt-confed. [ OK ] Started Regular background program processing daemon. Starting Login Service... Starting initialize filesystems at first boot... Starting System Logging Service... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Cgroup management daemon. Starting Bluetooth service... Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... [ OK ] Started watch config files. Starting Initialize Wire[ 15.843214] new mount options do not match the existing superblock, will be ignored n Board Device Tree overlays... [ OK ] Started System Logging Service. [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ OK ] Started Mosquitto MQTT v3.1/v3.1.1 Broker. [ 16.324465] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.329807] Bluetooth: BNEP filters: protocol multicast [ 16.423535] Bluetooth: BNEP socket layer initialized [ OK ] Started Bluetooth service. [ OK ] Started initialize filesystems at first boot. [ OK ] Started Login Service. Starting Hostname Service... Starting Avahi mDNS/DNS-SD Stack... [ OK ] Reached target Network. [ 17.481653] SMSC LAN8710/LAN8720 2188000.ethernet-2:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet-2:00, irq=POLL) Starting dnsmasq - A lightweight DHCP and caching DNS server... Starting Permit User Sessions... Starting A high performance web server and a reverse proxy server... Starting OpenBSD Secure Shell server... Starting KNX Daemon... [ OK ] Reached target Bluetooth. Starting LSB: startup and shutdown a emon service... Starting Wiren Board MQTT to OPC UA gateway... Starting Wiren Board MQTT to Modbus TCP gateway... [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board firmware update service. [ OK ] Started KNX Daemon. [ OK ] Started Permit User Sessions. [ 19.611868] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 19.619761] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Started Wiren Board MQTT to OPC UA gateway. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Hostname Service. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started LSB: startup and shutdown a emon service. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttymxc0. [ OK ] Reached target Login Prompts. [ OK ] Reached target Network is Online. Starting LSB: Advanced IEEE 802.11 management daemon... Starting LSB: Start NTP daemon... Starting LSB: Start zabbix-agent daemon... Starting LSB: Brings up/down network automatically... [ OK ] Started LSB: Start NTP daemon. [ 25.517720] process '/sbin/netplugd' started with executable stack Starting Compensation of systime in…evice-tree (with opposite sign)... [ OK ] Started A high performance web server and a reverse proxy server. Starting Initialize Wiren Board on successful boot... [ OK ] Started LSB: Start zabbix-agent daemon. [ OK ] Started Compensation of systime in … device-tree (with opposite sign). [ 28.612677] RTL871X: RTW_ADAPTIVITY_EN_ [ 28.612701] AUTO, chplan:0x20, Regulation:3,3 [ 28.620937] RTL871X: RTW_ADAPTIVITY_MODE_ [ 28.620941] NORMAL Debian GNU/Linux 9 WB6-AKSYATYY ttymxc0 WB6-AKSYATYY login: [ 29.305106] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 224, base_baud = 5000000) is a IMX [ 31.448594] RTL871X: assoc success [ 31.534278] Micrel KSZ8081 or KSZ8091 2188000.ethernet-2:03: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet-2:03, irq=POLL) [ 31.633767] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 33.292243] 2288000.serial: ttymxc7 at MMIO 0x2288000 (irq = 225, base_baud = 5000000) is a IMX [ 34.251735] gpio-19 (wbmz2_i2c_0): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 34.341598] gpio-18 (wbmz2_i2c_0): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 35.416497] i2c-gpio wbmz2_i2c_0: using lines 19 (SDA) and 18 (SCL) root Password: Last login: Thu Aug 11 08:31:41 UTC 2022 on ttymxc0  _ _ _ __ _(_)_ __ ___ _ __ | |__ ___ __ _ _ __ __| | \ \ /\ / / | '__/ _ \ '_ \| '_ \ / _ \ / _` | '__/ _` | \ V V /| | | | __/ | | | |_) | (_) | (_| | | | (_| | \_/\_/ |_|_| \___|_| |_|_.__/ \___/ \__,_|_| \__,_| Welcome to Wiren Board 6.8.2 (s/n AKSYATYY), release wb-2204 (as stable) Linux WB6-AKSYATYY 5.10.35-wb111 #1 Wed Apr 20 13:39:52 UTC 2022 armv7l GNU/Linux [ 57.661530] usb 2-1.3: new high-speed USB device number 4 using ci_hdrc [ 57.866744] usb 2-1.3: New USB device found, idVendor=1286, idProduct=812a, bcdDevice= 0.00 [ 57.875199] usb 2-1.3: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 57.882556] usb 2-1.3: Product: WUKONG [ 57.886328] usb 2-1.3: Manufacturer: MARVELL [ 58.185777] usb 2-1.3: can't set config #1, error -71 [ 58.309562] usb 2-1.3: USB disconnect, device number 4 root@WB6-AKSYATYY:~# [ 64.311493] usb 2-1.3: new high-speed USB device number 5 using ci_hdrc [ 64.532067] usb 2-1.3: config 1 has an invalid interface number: 5 but max is 4 [ 64.539436] usb 2-1.3: config 1 has no interface number 3 [ 64.657200] usb 2-1.3: New USB device found, idVendor=1e0e, idProduct=9011, bcdDevice= 1.00 [ 64.665746] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 64.673123] usb 2-1.3: Product: Mobile Composite Device Bus [ 64.678723] usb 2-1.3: Manufacturer: Marvell [ 64.683024] usb 2-1.3: SerialNumber: 200806006809080000 [ 65.156727] usbcore: registered new interface driver cdc_ether [ 65.275214] usbcore: registered new interface driver option [ 65.295712] usbserial: USB Serial support registered for GSM modem (1-port) [ 65.319324] rndis_host 2-1.3:1.0 usb0: register 'rndis_host' at usb-ci_hdrc.1-1.3, RNDIS device, 8a:18:c5:f3:1c:66 [ 65.467187] option 2-1.3:1.2: GSM modem (1-port) converter detected [ 65.485768] usbcore: registered new interface driver rndis_host [ 65.533993] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 65.542557] option 2-1.3:1.4: GSM modem (1-port) converter detected [ 65.626747] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 65.683896] option 2-1.3:1.5: GSM modem (1-port) converter detected [ 65.731929] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB2 rebootip als -lA /dev/ttyGSM* lrwxrwxrwx 1 root root 7 Aug 11 08:33 /dev/ttyGSM -> ttymxc7 root@WB6-AKSYATYY:~# ls -lA /dev/ttyGSM* lrwxrwxrwx 1 root root 7 Aug 11 08:33 /dev/ttyGSM -> ttymxc7 root@WB6-AKSYATYY:~# ls -lA /dev/ttyGSM* lrwxrwxrwx 1 root root 7 Aug 11 08:33 /dev/ttyGSM -> ttymxc7 root@WB6-AKSYATYY:~# ls -lA /dev/ttyGSM* lrwxrwxrwx 1 root root 7 Aug 11 08:33 /dev/ttyGSM -> ttymxc7 root@WB6-AKSYATYY:~# ls -lA /dev/ttyGSM****U*S*B* crw-rw---- 1 root dialout 188, 0 Aug 11 08:33 /dev/ttyUSB0 crw-rw---- 1 root dialout 188, 1 Aug 11 08:33 /dev/ttyUSB1 crw-rw---- 1 root dialout 188, 2 Aug 11 08:33 /dev/ttyUSB2 root@WB6-AKSYATYY:~# ls -lA /dev/ttyUSB*GSM* lrwxrwxrwx 1 root root 7 Aug 11 08:33 /dev/ttyGSM -> ttymxc7 root@WB6-AKSYATYY:~# ls -lA /dev/ttyGSM* lrwxrwxrwx 1 root root 7 Aug 11 08:33 /dev/ttyGSM -> ttymxc7 root@WB6-AKSYATYY:~# wb-gsm off root@WB6-AKSYATYY:~# [ 435.987823] usb 2-1.3: USB disconnect, device number 5 [ 436.005710] rndis_host 2-1.3:1.0 usb0: unregister 'rndis_host' usb-ci_hdrc.1-1.3, RNDIS device [ 436.046227] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 436.100532] option 2-1.3:1.2: device disconnected [ 436.131509] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 436.166983] option 2-1.3:1.4: device disconnected [ 436.190391] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 436.237912] option 2-1.3:1.5: device disconnected wb-gsm offls -lA /dev/ttyGSM* ls: cannot access '/dev/ttyGSM*': No such file or directory root@WB6-AKSYATYY:~# ls -lA /dev/ttyGSM*wb-gsm off  n [ 464.954961] usb 2-1.3: new high-speed USB device number 6 using ci_hdrc [ 465.116773] usb 2-1.3: New USB device found, idVendor=1286, idProduct=812a, bcdDevice= 0.00 [ 465.125280] usb 2-1.3: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 465.132733] usb 2-1.3: Product: WUKONG [ 465.136506] usb 2-1.3: Manufacturer: MARVELL [ 465.427963] usb 2-1.3: USB disconnect, device number 6 [ 471.611636] usb 2-1.3: new high-speed USB device number 7 using ci_hdrc [ 471.772075] usb 2-1.3: config 1 has an invalid interface number: 5 but max is 4 [ 471.779442] usb 2-1.3: config 1 has no interface number 3 [ 471.802207] usb 2-1.3: New USB device found, idVendor=1e0e, idProduct=9011, bcdDevice= 1.00 [ 471.810626] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 471.818021] usb 2-1.3: Product: Mobile Composite Device Bus [ 471.823625] usb 2-1.3: Manufacturer: Marvell [ 471.827901] usb 2-1.3: SerialNumber: 200806006809080000 [ 471.883235] rndis_host 2-1.3:1.0 usb0: register 'rndis_host' at usb-ci_hdrc.1-1.3, RNDIS device, 02:d1:35:f6:fe:1a [ 471.916627] option 2-1.3:1.2: GSM modem (1-port) converter detected [ 471.934948] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 471.955167] option 2-1.3:1.4: GSM modem (1-port) converter detected [ 471.971122] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 471.993769] option 2-1.3:1.5: GSM modem (1-port) converter detected [ 472.013122] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB3 ^[[A^[[A^[[Aroot@WB6-AKSYATYY:~# wb-gsm onls -lA /dev/ttyGSM*wb-gsm offls -lA /dev/ttyGSM* lrwxrwxrwx 1 root root 12 Aug 11 08:40 /dev/ttyGSM -> /dev/ttyGSM0 lrwxrwxrwx 1 root root 12 Aug 11 08:40 /dev/ttyGSM0 -> /dev/ttyUSB1 lrwxrwxrwx 1 root root 12 Aug 11 08:40 /dev/ttyGSM1 -> /dev/ttyUSB3 root@WB6-AKSYATYY:~# ifup ppp0 ifup: waiting for lock on /run/network/ifstate.ppp0 ^C root@WB6-AKSYATYY:~# poff Megafon /usr/bin/poff: No pppd is running. None stopped. root@WB6-AKSYATYY:~# poff Megafon[1@n /usr/sbin/pppd: In file /etc/ppp/peers/Megafon: unrecognized option '/dev/ttyUSB2' root@WB6-AKSYATYY:~# cta    at /     nano /etc/ppp/peers/Megafon )0(B[?7h(B[ Reading File ](B(B[ Read 36 lines ](B(B GNU nano 2.7.4 File: /etc/ppp/peers/Megafon (B#/dev/ttyGSM /dev/ttyUSB2 connect "/usr/sbin/chat -T telemetric.msk -f /etc/chatscripts/gprs" #connect "/usr/sbin/chat -T telemetric.msk -f /etc/chatscripts/gprs" /dev/ttyGSMinit "wb-gsm restart_if_broken" # param -v = verbose nocrtscts 115200 noauth #usepeerdns (B^G(B Get Help (B^O(B Write Out (B^W(B Where Is (B^K(B Cut Text (B^J(B Justify (B^C(B Cur Pos (B^X(B Exit(B^R(B Read File (B^\(B Replace (B^U(B Uncut Text(B^T(B To Spell (B^_(B Go To Line (BModified (B#/dev/ttyUSB2 #(BSave modified buffer? (Answering "No" will DISCARD changes.)  Y(B Yes (B N(B No  (B^C(B Cancel (B^G(B Get Help(BM-D(B DOS Format(BM-A(B Append(BM-B(B Backup File (B^C(B Cancel (BM-M(B Mac Format(BM-P(B Prepend(B^T(B To Files (BFile Name to Write: /etc/ppp/peers/Megafon (B (B[ Wrote 36 lines ](B (B (B root@WB6-AKSYATYY:~# nano /etc/ppp/peers/Megafon root@WB6-AKSYATYY:~# pon Megafon[1@ff Megafonn Megafon root@WB6-AKSYATYY:~# [ 950.699979] PPP BSD Compression module registered [ 950.751780] PPP Deflate Compression module registered ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000 link/ether e8:eb:1b:34:01:05 brd ff:ff:ff:ff:ff:ff 3: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether e8:eb:1b:34:75:ec brd ff:ff:ff:ff:ff:ff inet 192.168.44.44/24 brd 192.168.44.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::eaeb:1bff:fe34:75ec/64 scope link valid_lft forever preferred_lft forever 4: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 5: wlan0: mtu 1500 qdisc mq state UP group default qlen 1000 link/ether c0:21:0d:4f:b7:fb brd ff:ff:ff:ff:ff:ff inet6 fe80::c221:dff:fe4f:b7fb/64 scope link valid_lft forever preferred_lft forever 6: wlan1: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether c2:21:0d:4f:b7:fb brd ff:ff:ff:ff:ff:ff 8: usb0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 02:d1:35:f6:fe:1a brd ff:ff:ff:ff:ff:ff 9: ppp0: mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 3 link/ppp inet 172.16.1.124 peer 10.64.64.64/32 scope global ppp0 valid_lft forever preferred_lft forever root@WB6-AKSYATYY:~# rebbot -bash: rebbot: command not found root@WB6-AKSYATYY:~# rebbotoot Stopping Session c1 of user root. [ OK ] Stopped target Timers. Stopping watchdog daemon... Stopping Session c2 of user root. [ OK ] Stopped Daily Cleanup of Temporary Directories. [ OK ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Stopped Daily apt upgrade and clean activities. [ OK ] Stopped Daily apt download activities. [ OK ] Stopped target Host and Network Name Lookups. Stopping User Manager for UID 0... [ OK ] Stopped target System Time Synchronized. [ OK ] Stopped target Bluetooth. Stopping Bluetooth service... [ OK ] Stopped target Graphical Interface. [ OK ] Stopped Serial Getty on ttymxc0. [ OK ] Stopped Session c1 of user root. [ OK ] Stopped Bluetooth service. [ OK ] Stopped Session c2 of user root. [ OK ] Stopped User Manager for UID 0. [ OK ] Removed slice User Slice of root. [ OK ] Removed slice system-serial\x2dgetty.slice. [ OK ] Unmounted /run/user/0. [ OK ] Stopped watchdog daemon. [ OK ] Stopped target Multi-User System. [ OK ] Stopped target Login Prompts. Stopping Getty on tty1... Stopping Regular background program processing daemon... Stopping System Logging Service... [ OK ] Stopped Compensation of systime in … device-tree (with opposite sign). Stopping Wiren Board MQTT KNX bridge... Stopping LSB: startup and shutdown a emon service... Stopping LSB: Advanced IEEE 802.11 management daemon... Stopping Wiren Board database logger... Stopping Avahi mDNS/DNS-SD Stack... Stopping metrics sender.... Stopping Initialize Wiren Board on successful boot... Stopping D-Bus System Message Bus... Stopping Wiren Board journald to MQTT gateway... Stopping Wiren Board MQTT to Modbus TCP gateway... Stopping MQTT Driver for ADC... Stopping LSB: Start zabbix-agent daemon... Stopping MQTT Rule engine for Wiren Board... Stopping Login Service... Stopping Kernel 1-Wire MQTT driver for WB-HomA... Stopping Wiren Board firmware update service... [ OK ] Stopped Restore local date from Wiren Board GSM RTC. Stopping Cgroup management daemon... Stopping MQTT Driver for GPIO-controlled switches... Stopping LSB: Brings up/down network automatically... Stopping dnsmasq - A lightweight DHCP and caching DNS server... [ OK ] Stopped KNXD Configurator for Wiren Board. Stopping Wiren Board configuration editor backend... Stopping Wiren Board MQTT to OPC UA gateway... [ OK ] Stopped Regular background program processing daemon. [ OK ] Stopped Login Service. [ OK ] Stopped System Logging Service. [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped Cgroup management daemon. [ OK ] Stopped Avahi mDNS/DNS-SD Stack. [ OK ] Stopped Wiren Board configuration editor backend. [ OK ] Stopped Wiren Board journald to MQTT gateway. [ OK ] Stopped Wiren Board firmware update service. [ OK ] Stopped Wiren Board MQTT to OPC UA gateway. [ OK ] Stopped Getty on tty1. [ OK ] Stopped Wiren Board MQTT to Modbus TCP gateway. [ OK ] Stopped Wiren Board database logger. [ OK ] Stopped metrics sender.. [ OK ] Stopped Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Stopped Wiren Board MQTT KNX bridge. [ OK ] Stopped MQTT Rule engine for Wiren Board. [ OK ] Removed slice system-getty.slice. Stopping Permit User Sessions... [ OK ] Stopped MQTT Driver for ADC. [ OK ] Stopped LSB: Advanced IEEE 802.11 management daemon. [ OK ] Stopped LSB: Start zabbix-agent daemon. [ OK ] Stopped LSB: Brings up/down network automatically. [ OK ] Stopped Permit User Sessions. [ OK ] Stopped Flush Journal to Persistent Storage. [ OK ] Stopped MQTT Driver for GPIO-controlled switches. [ OK ] Stopped Initialize Wiren Board Device Tree overlays. Stopping watch config files... [ OK ] Stopped watch config files. [ OK ] Stopped Initialize Wiren Board on successful boot. Stopping LSB: Start NTP daemon... Stopping OpenBSD Secure Shell server... Stopping A high performance web server and a reverse proxy server... [ OK ] Stopped OpenBSD Secure Shell server. [ OK ] Stopped A high performance web server and a reverse proxy server. [ OK ] Stopped LSB: Start NTP daemon. [ OK ] Stopped target Network is Online. Stopping KNX Daemon... [ OK ] Stopped KNX Daemon. [ OK ] Stopped dnsmasq - A lightweight DHCP and caching DNS server. [ OK ] Stopped target Network. Stopping Raise network interfaces... [ OK ] Stopped initialize filesystems at first boot. [ OK ] Stopped LSB: startup and shutdown a emon service. Stopping Mosquitto MQTT v3.1/v3.1.1 Broker... [ OK ] Stopped Mosquitto MQTT v3.1/v3.1.1 Broker. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Basic System. [ OK ] Stopped target Sockets. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Closed Syslog Socket. [ OK ] Closed KNX Daemon (socket). [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Paths. [ OK ] Stopped Monitor directories with device templates for wb-mqtt-serial. [ OK ] Stopped target System Initialization. Stopping Load/Save Random Seed... [ OK ] Stopped target Encrypted Volumes. [ OK ] Stopped target Swap. Deactivating swap /dev/mmcblk0p5... Stopping Update UTMP about System Boot/Shutdown... [ OK ] Stopped Forward Password Requests to Wall Directory Watch. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [ OK ] Deactivated swap /dev/disk/by-uuid/…b9204-0c87-46e0-80c3-5bb645a93041. [ OK ] Deactivated swap /dev/disk/by-path/platform-2194000.mmc-part5. [ OK ] Deactivated swap /dev/disk/by-partuuid/0697d5ec-05. [ OK ] Deactivated swap /dev/disk/by-id/mmc-Q2J55L_0x092da411-part5. [ OK ] Stopped Load/Save Random Seed. [ OK ] Deactivated swap /dev/mmcblk0p5. [ OK ] Stopped Update UTMP about System Boot/Shutdown. [ 1016.174457] RTL871X: nolinked power save enter [ **] A stop job is running for Raise network interfaces (12s / 1min 35s) [ ***] A stop job is running for Raise network interfaces (12s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (13s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (13s / 1min 35s) [*** ] A stop job is running for Raise network interfaces (14s / 1min 35s) [** ] A stop job is running for Raise network interfaces (14s / 1min 35s) [* ] A stop job is running for Raise network interfaces (15s / 1min 35s) [** ] A stop job is running for Raise network interfaces (15s / 1min 35s) [*** ] A stop job is running for Raise network interfaces (16s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (16s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (17s / 1min 35s) [ ***] A stop job is running for Raise network interfaces (17s / 1min 35s) [ **] A stop job is running for Raise network interfaces (18s / 1min 35s) [ *] A stop job is running for Raise network interfaces (18s / 1min 35s) [ **] A stop job is running for Raise network interfaces (19s / 1min 35s) [ ***] A stop job is running for Raise network interfaces (19s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (20s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (20s / 1min 35s) [*** ] A stop job is running for Raise network interfaces (21s / 1min 35s) [** ] A stop job is running for Raise network interfaces (21s / 1min 35s) [* ] A stop job is running for Raise network interfaces (22s / 1min 35s) [** ] A stop job is running for Raise network interfaces (22s / 1min 35s) [*** ] A stop job is running for Raise network interfaces (23s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (23s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (24s / 1min 35s) [ ***] A stop job is running for Raise network interfaces (24s / 1min 35s) [ **] A stop job is running for Raise network interfaces (25s / 1min 35s) [ *] A stop job is running for Raise network interfaces (25s / 1min 35s) [ **] A stop job is running for Raise network interfaces (26s / 1min 35s) [ ***] A stop job is running for Raise network interfaces (26s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (27s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (27s / 1min 35s) [*** ] A stop job is running for Raise network interfaces (28s / 1min 35s) [** ] A stop job is running for Raise network interfaces (28s / 1min 35s) [* ] A stop job is running for Raise network interfaces (29s / 1min 35s) [** ] A stop job is running for Raise network interfaces (29s / 1min 35s) [*** ] A stop job is running for Raise network interfaces (30s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (30s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (31s / 1min 35s) [ ***] A stop job is running for Raise network interfaces (31s / 1min 35s) [ **] A stop job is running for Raise network interfaces (32s / 1min 35s) [ *] A stop job is running for Raise network interfaces (32s / 1min 35s) [ **] A stop job is running for Raise network interfaces (33s / 1min 35s) [ ***] A stop job is running for Raise network interfaces (33s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (34s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (34s / 1min 35s) [*** ] A stop job is running for Raise network interfaces (35s / 1min 35s) [** ] A stop job is running for Raise network interfaces (35s / 1min 35s) [* ] A stop job is running for Raise network interfaces (36s / 1min 35s) [** ] A stop job is running for Raise network interfaces (36s / 1min 35s) [*** ] A stop job is running for Raise network interfaces (37s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (37s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (38s / 1min 35s) [ ***] A stop job is running for Raise network interfaces (38s / 1min 35s) [ **] A stop job is running for Raise network interfaces (39s / 1min 35s) [ *] A stop job is running for Raise network interfaces (39s / 1min 35s) [ **] A stop job is running for Raise network interfaces (40s / 1min 35s) [ ***] A stop job is running for Raise network interfaces (40s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (41s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (41s / 1min 35s) [*** ] A stop job is running for Raise network interfaces (42s / 1min 35s) [** ] A stop job is running for Raise network interfaces (42s / 1min 35s) [* ] A stop job is running for Raise network interfaces (43s / 1min 35s) [** ] A stop job is running for Raise network interfaces (43s / 1min 35s) [*** ] A stop job is running for Raise network interfaces (44s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (44s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (45s / 1min 35s) [ ***] A stop job is running for Raise network interfaces (45s / 1min 35s) [ **] A stop job is running for Raise network interfaces (46s / 1min 35s) [ *] A stop job is running for Raise network interfaces (46s / 1min 35s) [ **] A stop job is running for Raise network interfaces (47s / 1min 35s) [ ***] A stop job is running for Raise network interfaces (47s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (48s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (48s / 1min 35s) [*** ] A stop job is running for Raise network interfaces (49s / 1min 35s) [** ] A stop job is running for Raise network interfaces (49s / 1min 35s) [* ] A stop job is running for Raise network interfaces (50s / 1min 35s) [** ] A stop job is running for Raise network interfaces (50s / 1min 35s) [*** ] A stop job is running for Raise network interfaces (51s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (51s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (52s / 1min 35s) [ ***] A stop job is running for Raise network interfaces (52s / 1min 35s) [ **] A stop job is running for Raise network interfaces (53s / 1min 35s) [ *] A stop job is running for Raise network interfaces (53s / 1min 35s) [ **] A stop job is running for Raise network interfaces (54s / 1min 35s) [ ***] A stop job is running for Raise network interfaces (54s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (55s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (55s / 1min 35s) [*** ] A stop job is running for Raise network interfaces (56s / 1min 35s) [** ] A stop job is running for Raise network interfaces (56s / 1min 35s) [* ] A stop job is running for Raise network interfaces (57s / 1min 35s) [** ] A stop job is running for Raise network interfaces (57s / 1min 35s) [*** ] A stop job is running for Raise network interfaces (58s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (58s / 1min 35s) [ *** ] A stop job is running for Raise network interfaces (59s / 1min 35s) [ ***] A stop job is running for Raise network interfaces (59s / 1min 35s) [ **] A stop job is running for Raise network interfaces (1min / 1min 35s) [ *] A stop job is running for Raise network interfaces (1min / 1min 35s) [ **] A stop job is running for Raise net…rk interfaces (1min 1s / 1min 35s) [ ***] A stop job is running for Raise net…rk interfaces (1min 1s / 1min 35s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 2s / 1min 35s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 2s / 1min 35s) [*** ] A stop job is running for Raise net…rk interfaces (1min 3s / 1min 35s) [** ] A stop job is running for Raise net…rk interfaces (1min 3s / 1min 35s) [* ] A stop job is running for Raise net…rk interfaces (1min 4s / 1min 35s) [** ] A stop job is running for Raise net…rk interfaces (1min 4s / 1min 35s) [*** ] A stop job is running for Raise net…rk interfaces (1min 5s / 1min 35s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 5s / 1min 35s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 6s / 1min 35s) [ ***] A stop job is running for Raise net…rk interfaces (1min 6s / 1min 35s) [ **] A stop job is running for Raise net…rk interfaces (1min 7s / 1min 35s) [ *] A stop job is running for Raise net…rk interfaces (1min 7s / 1min 35s) [ **] A stop job is running for Raise net…rk interfaces (1min 8s / 1min 35s) [ ***] A stop job is running for Raise net…rk interfaces (1min 8s / 1min 35s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 9s / 1min 35s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 9s / 1min 35s) [*** ] A stop job is running for Raise net…k interfaces (1min 10s / 1min 35s) [** ] A stop job is running for Raise net…k interfaces (1min 10s / 1min 35s) [* ] A stop job is running for Raise net…k interfaces (1min 11s / 1min 35s) [** ] A stop job is running for Raise net…k interfaces (1min 11s / 1min 35s) [*** ] A stop job is running for Raise net…k interfaces (1min 12s / 1min 35s) [ *** ] A stop job is running for Raise net…k interfaces (1min 12s / 1min 35s) [ *** ] A stop job is running for Raise net…k interfaces (1min 13s / 1min 35s) [ ***] A stop job is running for Raise net…k interfaces (1min 13s / 1min 35s) [ **] A stop job is running for Raise net…k interfaces (1min 14s / 1min 35s) [ *] A stop job is running for Raise net…k interfaces (1min 14s / 1min 35s) [ **] A stop job is running for Raise net…k interfaces (1min 15s / 1min 35s) [ ***] A stop job is running for Raise net…k interfaces (1min 15s / 1min 35s) [ *** ] A stop job is running for Raise net…k interfaces (1min 16s / 1min 35s) [ *** ] A stop job is running for Raise net…k interfaces (1min 16s / 1min 35s) [*** ] A stop job is running for Raise net…k interfaces (1min 17s / 1min 35s) [** ] A stop job is running for Raise net…k interfaces (1min 17s / 1min 35s) [* ] A stop job is running for Raise net…k interfaces (1min 18s / 1min 35s) [** ] A stop job is running for Raise net…k interfaces (1min 18s / 1min 35s) [*** ] A stop job is running for Raise net…k interfaces (1min 19s / 1min 35s) [ *** ] A stop job is running for Raise net…k interfaces (1min 19s / 1min 35s) [ *** ] A stop job is running for Raise net…k interfaces (1min 20s / 1min 35s) [ ***] A stop job is running for Raise net…k interfaces (1min 20s / 1min 35s) [ **] A stop job is running for Raise net…k interfaces (1min 21s / 1min 35s) [ *] A stop job is running for Raise net…k interfaces (1min 21s / 1min 35s) [ **] A stop job is running for Raise net…k interfaces (1min 22s / 1min 35s) [ ***] A stop job is running for Raise net…k interfaces (1min 22s / 1min 35s) [ *** ] A stop job is running for Raise net…k interfaces (1min 23s / 1min 35s) [ *** ] A stop job is running for Raise net…k interfaces (1min 23s / 1min 35s) [*** ] A stop job is running for Raise net…k interfaces (1min 24s / 1min 35s) [** ] A stop job is running for Raise net…k interfaces (1min 24s / 1min 35s) [* ] A stop job is running for Raise net…k interfaces (1min 25s / 1min 35s) [** ] A stop job is running for Raise net…k interfaces (1min 25s / 1min 35s) [*** ] A stop job is running for Raise net…k interfaces (1min 26s / 1min 35s) [ *** ] A stop job is running for Raise net…k interfaces (1min 26s / 1min 35s) [ *** ] A stop job is running for Raise net…k interfaces (1min 27s / 1min 35s) [ ***] A stop job is running for Raise net…k interfaces (1min 27s / 1min 35s) [ **] A stop job is running for Raise net…k interfaces (1min 28s / 1min 35s) [ *] A stop job is running for Raise net…k interfaces (1min 28s / 1min 35s) [ **] A stop job is running for Raise net…k interfaces (1min 29s / 1min 35s) [ ***] A stop job is running for Raise net…k interfaces (1min 29s / 1min 35s) [ *** ] A stop job is running for Raise net…k interfaces (1min 30s / 1min 35s) [ *** ] A stop job is running for Raise net…k interfaces (1min 30s / 1min 35s) [*** ] A stop job is running for Raise net…k interfaces (1min 31s / 1min 35s) [** ] A stop job is running for Raise net…k interfaces (1min 31s / 1min 35s) [* ] A stop job is running for Raise net…k interfaces (1min 32s / 1min 35s) [** ] A stop job is running for Raise net…k interfaces (1min 32s / 1min 35s) [*** ] A stop job is running for Raise net…k interfaces (1min 33s / 1min 35s) [ *** ] A stop job is running for Raise net…k interfaces (1min 33s / 1min 35s) [ *** ] A stop job is running for Raise net…k interfaces (1min 34s / 1min 35s) [ ***] A stop job is running for Raise net…k interfaces (1min 34s / 1min 35s) [ **] A stop job is running for Raise net…k interfaces (1min 35s / 1min 35s) [ *] A stop job is running for Raise net…k interfaces (1min 35s / 1min 35s) [ **] A stop job is running for Raise net…rk interfaces (1min 36s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (1min 36s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 37s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 37s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (1min 38s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (1min 38s / 3min 6s) [* ] A stop job is running for Raise net…rk interfaces (1min 39s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (1min 39s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (1min 40s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 40s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 41s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (1min 41s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (1min 42s / 3min 6s) [ *] A stop job is running for Raise net…rk interfaces (1min 42s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (1min 43s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (1min 43s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 44s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 44s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (1min 45s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (1min 45s / 3min 6s) [* ] A stop job is running for Raise net…rk interfaces (1min 46s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (1min 46s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (1min 47s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 47s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 48s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (1min 48s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (1min 49s / 3min 6s) [ *] A stop job is running for Raise net…rk interfaces (1min 49s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (1min 50s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (1min 50s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 51s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 51s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (1min 52s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (1min 52s / 3min 6s) [* ] A stop job is running for Raise net…rk interfaces (1min 53s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (1min 53s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (1min 54s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 54s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 55s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (1min 55s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (1min 56s / 3min 6s) [ *] A stop job is running for Raise net…rk interfaces (1min 56s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (1min 57s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (1min 57s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 58s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (1min 58s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (1min 59s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (1min 59s / 3min 6s) [* ] A stop job is running for Raise network interfaces (2min / 3min 6s) [** ] A stop job is running for Raise network interfaces (2min / 3min 6s) [*** ] A stop job is running for Raise network interfaces (2min 1s / 3min 6s) [ *** ] A stop job is running for Raise network interfaces (2min 1s / 3min 6s) [ *** ] A stop job is running for Raise network interfaces (2min 2s / 3min 6s) [ ***] A stop job is running for Raise network interfaces (2min 2s / 3min 6s) [ **] A stop job is running for Raise network interfaces (2min 3s / 3min 6s) [ *] A stop job is running for Raise network interfaces (2min 3s / 3min 6s) [ **] A stop job is running for Raise network interfaces (2min 4s / 3min 6s) [ ***] A stop job is running for Raise network interfaces (2min 4s / 3min 6s) [ *** ] A stop job is running for Raise network interfaces (2min 5s / 3min 6s) [ *** ] A stop job is running for Raise network interfaces (2min 5s / 3min 6s) [*** ] A stop job is running for Raise network interfaces (2min 6s / 3min 6s) [** ] A stop job is running for Raise network interfaces (2min 6s / 3min 6s) [* ] A stop job is running for Raise network interfaces (2min 7s / 3min 6s) [** ] A stop job is running for Raise network interfaces (2min 7s / 3min 6s) [*** ] A stop job is running for Raise network interfaces (2min 8s / 3min 6s) [ *** ] A stop job is running for Raise network interfaces (2min 8s / 3min 6s) [ *** ] A stop job is running for Raise network interfaces (2min 9s / 3min 6s) [ ***] A stop job is running for Raise network interfaces (2min 9s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (2min 10s / 3min 6s) [ *] A stop job is running for Raise net…rk interfaces (2min 10s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (2min 11s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (2min 11s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 12s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 12s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (2min 13s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (2min 13s / 3min 6s) [* ] A stop job is running for Raise net…rk interfaces (2min 14s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (2min 14s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (2min 15s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 15s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 16s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (2min 16s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (2min 17s / 3min 6s) [ *] A stop job is running for Raise net…rk interfaces (2min 17s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (2min 18s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (2min 18s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 19s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 19s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (2min 20s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (2min 20s / 3min 6s) [* ] A stop job is running for Raise net…rk interfaces (2min 21s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (2min 21s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (2min 22s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 22s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 23s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (2min 23s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (2min 24s / 3min 6s) [ *] A stop job is running for Raise net…rk interfaces (2min 24s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (2min 25s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (2min 25s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 26s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 26s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (2min 27s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (2min 27s / 3min 6s) [* ] A stop job is running for Raise net…rk interfaces (2min 28s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (2min 28s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (2min 29s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 29s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 30s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (2min 30s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (2min 31s / 3min 6s) [ *] A stop job is running for Raise net…rk interfaces (2min 31s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (2min 32s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (2min 32s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 33s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 33s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (2min 34s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (2min 34s / 3min 6s) [* ] A stop job is running for Raise net…rk interfaces (2min 35s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (2min 35s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (2min 36s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 36s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 37s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (2min 37s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (2min 38s / 3min 6s) [ *] A stop job is running for Raise net…rk interfaces (2min 38s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (2min 39s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (2min 39s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 40s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 40s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (2min 41s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (2min 41s / 3min 6s) [* ] A stop job is running for Raise net…rk interfaces (2min 42s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (2min 42s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (2min 43s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 43s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 44s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (2min 44s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (2min 45s / 3min 6s) [ *] A stop job is running for Raise net…rk interfaces (2min 45s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (2min 46s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (2min 46s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 47s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 47s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (2min 48s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (2min 48s / 3min 6s) [* ] A stop job is running for Raise net…rk interfaces (2min 49s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (2min 49s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (2min 50s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 50s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 51s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (2min 51s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (2min 52s / 3min 6s) [ *] A stop job is running for Raise net…rk interfaces (2min 52s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (2min 53s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (2min 53s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 54s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 54s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (2min 55s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (2min 55s / 3min 6s) [* ] A stop job is running for Raise net…rk interfaces (2min 56s / 3min 6s) [** ] A stop job is running for Raise net…rk interfaces (2min 56s / 3min 6s) [*** ] A stop job is running for Raise net…rk interfaces (2min 57s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 57s / 3min 6s) [ *** ] A stop job is running for Raise net…rk interfaces (2min 58s / 3min 6s) [ ***] A stop job is running for Raise net…rk interfaces (2min 58s / 3min 6s) [ **] A stop job is running for Raise net…rk interfaces (2min 59s / 3min 6s) [ *] A stop job is running for Raise net…rk interfaces (2min 59s / 3min 6s) [ **] A stop job is running for Raise network interfaces (3min / 3min 6s) [ ***] A stop job is running for Raise network interfaces (3min / 3min 6s) [ *** ] A stop job is running for Raise network interfaces (3min 1s / 3min 6s) [ *** ] A stop job is running for Raise network interfaces (3min 1s / 3min 6s) [*** ] A stop job is running for Raise network interfaces (3min 2s / 3min 6s) [** ] A stop job is running for Raise network interfaces (3min 2s / 3min 6s) [* ] A stop job is running for Raise network interfaces (3min 3s / 3min 6s) [** ] A stop job is running for Raise network interfaces (3min 3s / 3min 6s) [*** ] A stop job is running for Raise network interfaces (3min 4s / 3min 6s) [ *** ] A stop job is running for Raise network interfaces (3min 4s / 3min 6s) [ *** ] A stop job is running for Raise network interfaces (3min 5s / 3min 6s) [ ***] A stop job is running for Raise network interfaces (3min 5s / 3min 6s) [ OK ] Stopped Raise network interfaces. [ OK ] Stopped target Local File Systems. Unmounting /var/log... [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Load Kernel Modules. [FAILED] Failed unmounting /var/log. Unmounting /mnt/data... [ OK ] Unmounted /mnt/data. [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped File System Check on /dev/mmcblk0p6. [ OK ] Removed slice system-systemd\x2dfsck.slice. [ OK ] Stopped target Local File Systems (Pre). [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped prepare partitions at first boot. [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Reached target Shutdown. [ 1195.165157] watchdog: watchdog0: watchdog did not stop! [ 1195.207197] printk: systemd-shutdow: 26 output lines suppressed due to ratelimiting [ 1195.276374] systemd-shutdown[1]: Sending SIGTERM to remaining processes... [ 1195.299136] systemd-journald[101]: Received SIGTERM from PID 1 (systemd-shutdow). [ 1195.373492] systemd-shutdown[1]: Sending SIGKILL to remaining processes... [ 1195.416293] systemd-shutdown[1]: Hardware watchdog 'imx2+ watchdog', version 0 [ 1195.436934] systemd-shutdown[1]: Unmounting file systems. [ 1195.444253] systemd-shutdown[1]: Remounting '/var/log' read-only with options ''. [ 1195.473093] EXT4-fs (mmcblk0p6): re-mounted. Opts: [ 1195.485859] systemd-shutdown[1]: Unmounting /var/log. [ 1195.628294] systemd-shutdown[1]: Remounting '/' read-only with options 'errors=remount-ro'. [ 1195.663297] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro [ 1195.688546] systemd-shutdown[1]: Remounting '/' read-only with options 'errors=remount-ro'. [ 1195.697706] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro [ 1195.704512] systemd-shutdown[1]: Remounting '/' read-only with options 'errors=remount-ro'. [ 1195.713135] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro [ 1195.719551] systemd-shutdown[1]: All filesystems unmounted. [ 1195.756549] ci_hdrc ci_hdrc.0: remove, state 4 [ 1195.761033] usb usb1: USB disconnect, device number 1 [ 1195.767190] ci_hdrc ci_hdrc.0: USB bus 1 deregistered [ 1195.803337] ci_hdrc ci_hdrc.1: remove, state 1 [ 1195.807821] usb usb2: USB disconnect, device number 1 [ 1195.812984] usb 2-1: USB disconnect, device number 2 [ 1195.817959] usb 2-1.1: USB disconnect, device number 3 [ 1195.825318] RTL871X: rtw_ndev_uninit(wlan0) [ 1195.830798] RTL871X: rtw_ndev_uninit(wlan1) [ 1195.836208] RTL871X: rtw_cmd_thread: DriverStopped(1) SurpriseRemoved(1) break at line 452 [ 1195.844597] RTL871X: rtw_dev_unload: driver in IPS-FWLPS [ 1195.851917] usb 2-1.3: USB disconnect, device number 7 [ 1195.857260] rndis_host 2-1.3:1.0 usb0: unregister 'rndis_host' usb-ci_hdrc.1-1.3, RNDIS device [ 1195.867684] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 1195.875856] option 2-1.3:1.2: device disconnected [ 1195.881232] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 1195.889392] option 2-1.3:1.4: device disconnected [ 1195.894802] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 [ 1195.902996] option 2-1.3:1.5: device disconnected [ 1195.912681] ci_hdrc ci_hdrc.1: USB bus 2 deregistered [ 1195.917989] imx2-wdt 20bc000.watchdog: Device shutdown: Expect reboot! [ 1195.924667] reboot: Restarting system U-Boot SPL 2017.03-1.2.0-gf92dee6f51 (Jun 02 2021 - 13:45:31) DRAM init ok, rows:16, ncs:1, size: 1024MB Trying to boot from MMC1 Warning - USDHC2 controller not supporting U-Boot 2017.03-1.2.0-gf92dee6f51 (Jun 02 2021 - 13:45:31 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 57C Reset cause: WDOG Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 1 GiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 3  2  1  0 Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found No storage devices, perhaps not 'usb start'ed..? No USB update detected, continuing boot switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 324 bytes read in 69 ms (3.9 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 5899176 bytes read in 392 ms (14.4 MiB/s) MMC read: dev # 0, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt imx6ul-wirenboard680 46902 bytes read in 143 ms (319.3 KiB/s) 485 bytes read in 153 ms (2.9 KiB/s) Applying DT overlay wb6-nogsm 597 bytes read in 146 ms (3.9 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu 509 bytes read in 175 ms (2 KiB/s) Applying DT overlay wb6-noradio 334 bytes read in 113 ms (2 KiB/s) Applying DT overlay wb6-eth1 254 bytes read in 127 ms (2 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to bef4b000, end bef6dfff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb111 (jenkins@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 6.3.0-18) 6.3.0 20170516, GNU ld (GNU Binutils for Debian) 2.28) #1 Wed Apr 20 13:39:52 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 6.8.0 (i.MX6UL/ULL) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0xbf000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 259840 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1008680K/1048576K available (8192K kernel code, 714K rwdata, 2680K rodata, 1024K init, 272K bss, 23512K reserved, 16384K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x238/0x3d4 with crng_init=0 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000018] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000065] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002875] Console: colour dummy device 80x30 [ 0.002946] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002991] pid_max: default: 32768 minimum: 301 [ 0.003445] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003488] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005104] CPU: Testing write buffer coherency: ok [ 0.006218] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.007245] devtmpfs: initialized [ 0.025503] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.026031] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.026081] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.027472] pinctrl core: initialized pinctrl subsystem [ 0.029523] NET: Registered protocol family 16 [ 0.031894] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.033952] thermal_sys: Registered thermal governor 'step_wise' [ 0.034247] cpuidle: using governor menu [ 0.230994] vdd1p1: supplied by regulator-dummy [ 0.243603] vdd3p0: supplied by regulator-dummy [ 0.256232] cpu: supplied by regulator-dummy [ 0.268831] vddsoc: supplied by regulator-dummy [ 0.629686] No ATAGs? [ 0.629749] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.629775] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.630398] debugfs: Directory 'dummy-iomuxc-gpr@20e4000' with parent 'regmap' already present! [ 0.631072] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.632538] imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000 [ 0.632579] imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl driver [ 0.673957] mxs-dma 1804000.dma-apbh: initialized [ 0.679333] SCSI subsystem initialized [ 0.679844] usbcore: registered new interface driver usbfs [ 0.679977] usbcore: registered new interface driver hub [ 0.680087] usbcore: registered new device driver usb [ 0.680949] gpio-48 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.681085] gpio-49 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.682473] i2c-gpio i2c_rtc: using lines 48 (SDA) and 49 (SCL) [ 0.683457] gpio-76 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.683603] gpio-67 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.684222] i2c-gpio i2c_eeprom1: using lines 76 (SDA) and 67 (SCL) [ 0.684941] gpio-70 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.685073] gpio-71 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.685675] i2c-gpio i2c_eeprom2: using lines 70 (SDA) and 71 (SCL) [ 0.687282] gpio-30 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.687652] i2c i2c-1: IMX I2C adapter registered [ 0.688410] mc: Linux media interface: v0.10 [ 0.688531] videodev: Linux video capture interface: v2.00 [ 0.688672] pps_core: LinuxPPS API ver. 1 registered [ 0.688697] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.688765] PTP clock support registered [ 0.689402] Advanced Linux Sound Architecture Driver Initialized. [ 0.691595] clocksource: Switched to clocksource mxc_timer1 [ 0.709806] NET: Registered protocol family 2 [ 0.711018] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.711139] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.711340] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.711534] TCP: Hash tables configured (established 8192 bind 8192) [ 0.711909] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.711986] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.712365] NET: Registered protocol family 1 [ 0.713308] RPC: Registered named UNIX socket transport module. [ 0.713345] RPC: Registered udp transport module. [ 0.713366] RPC: Registered tcp transport module. [ 0.713383] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.714587] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.717508] Initialise system trusted keyrings [ 0.717952] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.729771] NFS: Registering the id_resolver key type [ 0.729852] Key type id_resolver registered [ 0.729878] Key type id_legacy registered [ 0.730821] Key type asymmetric registered [ 0.730857] Asymmetric key parser 'x509' registered [ 0.730965] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.730994] io scheduler mq-deadline registered [ 0.731014] io scheduler kyber registered [ 0.743455] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.743507] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.747516] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 21, base_baud = 5000000) is a IMX [ 1.410724] printk: console [ttymxc0] enabled [ 1.417282] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59, base_baud = 5000000) is a IMX [ 1.461173] imx_rngc 2284000.rng: Freescale RNGB registered (HW revision 2.129) [ 1.468611] random: fast init done [ 1.472591] random: crng init done [ 1.512500] brd: module loaded [ 1.530432] loop: module loaded [ 1.534070] at24 5-0050: supply vcc not found, using dummy regulator [ 1.545534] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.552551] at24 6-0050: supply vcc not found, using dummy regulator [ 1.563985] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.576570] libphy: Fixed MDIO Bus: probed [ 1.583832] pps pps0: new PPS source ptp0 [ 1.624634] libphy: fec_enet_mii_bus: probed [ 1.629939] fec 20b4000.ethernet eth0: registered PHC device 0 [ 1.752290] pps pps1: new PPS source ptp1 [ 1.759152] libphy: fec_enet_mii_bus: probed [ 1.768015] fec 2188000.ethernet eth1: registered PHC device 1 [ 1.774878] PPP generic driver version 2.4.2 [ 1.779612] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.786262] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.792051] usbcore: registered new interface driver usb-storage [ 1.798305] usbcore: registered new interface driver usbserial_generic [ 1.804986] usbserial: USB Serial support registered for generic [ 1.854449] rtc rtc0: invalid alarm value: 2022-08-28T33:00:00 [ 1.860733] rtc-pcf8563 4-0051: registered as rtc0 [ 1.877568] rtc-pcf8563 4-0051: setting system clock to 2022-08-11T08:52:42 UTC (1660207962) [ 1.896363] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc1 [ 1.902907] i2c /dev entries driver [ 1.909761] lm75 4-0048: supply vs not found, using dummy regulator [ 1.921426] lm75 4-0048: hwmon0: sensor 'lm75b' [ 2.042123] sdhci: Secure Digital Host Controller Interface driver [ 2.048335] sdhci: Copyright(c) Pierre Ossman [ 2.052759] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.066714] ledtrig-cpu: registered to indicate activity on CPUs [ 2.074591] usbcore: registered new interface driver usbhid [ 2.080192] usbhid: USB HID core driver [ 2.096775] NET: Registered protocol family 10 [ 2.101365] mmc0: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 2.111359] Segment Routing with IPv6 [ 2.115885] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.123910] NET: Registered protocol family 17 [ 2.128684] Key type dns_resolver registered [ 2.137514] registered taskstats version 1 [ 2.141760] Loading compiled-in X.509 certificates [ 2.164102] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 2.176012] of_cfs_init [ 2.178769] of_cfs_init: OK [ 2.186651] ALSA device list: [ 2.189655] No soundcards found. [ 2.193462] Waiting for root device /dev/mmcblk0p3... [ 2.203059] mmc0: new DDR MMC card at address 0001 [ 2.208773] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 2.213840] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 2.220136] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 2.226476] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB, chardev (245:0) [ 2.237080] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.260075] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.268611] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 2.280275] devtmpfs: mounted [ 2.287281] Freeing unused kernel memory: 1024K [ 2.292717] Run /sbin/init as init process [ 2.646790] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.665925] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 2.718644] systemd[1]: Set hostname to . [ 3.347766] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 3.382305] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 3.422900] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 3.463409] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 3.502852] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 3.543772] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 3.593678] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... Starting Nameserver information manager... Starting File System Check on Root Device... Starting Create list of required st…ce nodes for the current kernel... Mounting /sys/kernel/config... Starting Load Kernel Modules... [ OK ] Listening on udev Control Socket. [ OK ] Created slice User and Session Slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-getty.slice. [ OK ] Reached target Slices. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on Journal Socket (/dev/log). Starting Journal Service... Mounting Debug File System... [ OK ] Listening on udev Kernel Socket. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Encrypted Volumes. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Mounted /sys/kernel/config. [ OK ] Started Journal Service. [ OK ] Started File System Check on Root Device. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Load Kernel Modules. [ OK ] Started Nameserver information manager. [ OK ] Started File System Check Daemon to report status. Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... Starting Remount Root and Kernel File Systems... [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. [ 4.841709] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Load/Save Random Seed... Starting prepare partitions at first boot... Starting udev Kernel Device Manager... [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Kernel Device Manager. [ OK ] Started prepare partitions at first boot. [ OK ] Reached target Local File Systems (Pre). [ OK ] Started udev Coldplug all Devices. [ 7.013464] Driver for 1-wire Dallas network protocol. [ 7.060224] gpio-68 (onewire_w1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 7.146052] gpio-11 (onewire_w2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ OK ] Found device /dev/ttymxc0. [ 7.555425] fec 20b4000.ethernet rename2: renamed from eth0 [ 7.917842] fec 2188000.ethernet eth0: renamed from eth1 [ 7.979150] fec 20b4000.ethernet eth1: renamed from rename2 [ 7.990699] imx_usb 2184000.usb: No over current polarity defined [ 8.093599] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 8.098551] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 8.281709] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 8.320303] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 8.328665] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.335938] usb usb1: Product: EHCI Host Controller [ 8.340824] usb usb1: Manufacturer: Linux 5.10.35-wb111 ehci_hcd [ 8.346859] usb usb1: SerialNumber: ci_hdrc.0 [ 8.618758] hub 1-0:1.0: USB hub found [ 8.671942] hub 1-0:1.0: 1 port detected [ 8.744211] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 8.749164] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 8.881749] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 8.928536] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 8.936902] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.944187] usb usb2: Product: EHCI Host Controller [ 8.949075] usb usb2: Manufacturer: Linux 5.10.35-wb111 ehci_hcd [ 8.955110] usb usb2: SerialNumber: ci_hdrc.1 [ OK ] Found device /dev/mmcblk0p5. [ 9.081758] usb usb1-port1: over-current condition [ OK ] Found device /dev/mmcblk0p6. [ 9.205398] hub 2-0:1.0: USB hub found [ 9.251482] hub 2-0:1.0: 1 port detected Starting File System Check on /dev/mmcblk0p6... [ 9.661696] usb 2-1: new high-speed USB device number 2 using ci_hdrc Activating swap /dev/mmcblk0p5... [ 9.810281] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SS [ 9.902404] usb 2-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 9.910635] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ 9.989783] hub 2-1:1.0: USB hub found [ 10.003794] hub 2-1:1.0: 4 ports detected [ OK ] Started File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 10.215691] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /mnt/data. Mounting /var/log... [ 10.331778] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ OK ] Mounted /var/log. Starting Flush Journal to Persistent Storage... [ OK ] Reached target Local File Systems. Starting Raise network interfaces... [ 10.494390] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00 [ 10.502836] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.510186] usb 2-1.1: Product: 802.11n WLAN Adapter [ 10.515196] usb 2-1.1: Manufacturer: Realtek [ 10.519475] usb 2-1.1: SerialNumber: 00e04c000001 Starting prepare mounts and symlinks to config files... [ OK ] Started Raise network interfaces. [ 10.731975] systemd-journald[110]: Received request to flush runtime journal from PID 1 [ 10.886208] Bluetooth: Core ver 2.22 [ 10.889954] NET: Registered protocol family 31 [ 10.894484] Bluetooth: HCI device and connection manager initialized [ 10.959385] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 11.000358] Bluetooth: HCI socket layer initialized [ 11.024498] Bluetooth: L2CAP socket layer initialized [ 11.057244] Bluetooth: SCO socket layer initialized Starting Load/Save RF Ki[ 11.182984] usbcore: registered new interface driver btusb ll Switch Status... [ 11.204159] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 11.214017] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 11.220094] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 11.230145] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 11.239160] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 11.245736] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 11.255022] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 11.415491] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 11.461188] cfg80211: failed to load regulatory.db [ OK ] Started Load/Save RF Kill Switch Status. [ 12.088931] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ 12.328040] RTL871X: module init start [ 12.331895] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 [ 12.338862] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ OK ] Started Flush Journal to Persistent Storage. [ 12.635315] RTL871X: rtw_ndev_init(wlan0) [ 12.656828] RTL871X: rtw_ndev_init(wlan1) [ 12.680552] usbcore: registered new interface driver rtl8723bu [ 12.686485] RTL871X: module init ret=0 [ 12.881858] SMSC LAN8710/LAN8720 2188000.ethernet-2:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet-2:00, irq=POLL) [ 12.928505] usbcore: registered new interface driver rtl8xxxu [ OK ] Started prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Reached target System Time Synchronized. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Monitor directories with device templates for wb-mqtt-serial. [ OK ] Reached target Paths. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Basic System. Starting Login Service... Starting Restore local date from Wiren Board GSM RTC... Starting Bluetooth service... Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... Starting initialize filesystems at first boot... [ OK ] Started Generates wb-mqtt-serial UI schema for wb-mqtt-confed. Starting System Logging Service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. [ 14.972084] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 14.979974] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Started Bluetooth service. [ OK ] Reached target Bluetooth. [ 15.377853] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.383296] Bluetooth: BNEP filters: protocol multicast [ OK ] Started Daily apt download activities. [ 15.406906] Bluetooth: BNEP socket layer initialized Starting Mosquitto MQTT v3.1/v3.1.1 Broker... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... [ OK ] Started Cgroup management daemon. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. [ OK ] Started System Logging Service. [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ 15.881480] new mount options do not match the existing superblock, will be ignored [ OK ] Started Mosquitto MQTT v3.1/v3.1.1 Broker. [ OK ] Started initialize filesystems at first boot. [ OK ] Started Login Service. Starting Hostname Service... [ OK ] Reached target Network. Starting OpenBSD Secure Shell server... Starting KNX Daemon... Starting A high performance web server and a reverse proxy server... Starting dnsmasq - A lightweight DHCP and caching DNS server... Starting Permit User Sessions... Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started Wiren Board configuration editor backend. Starting Wiren Board MQTT to Modbus TCP gateway... Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board firmware update service. Starting LSB: startup and shutdown a emon service... [ OK ] Started KNX Daemon. [ OK ] Started Permit User Sessions. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Wiren Board MQTT to OPC UA gateway. [ OK ] Started Hostname Service. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Serial Getty on ttymxc0. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Reached target Network is Online. Starting LSB: Advanced IEEE 802.11 management daemon... Starting LSB: Start zabbix-agent daemon... Starting LSB: Start NTP daemon... Starting LSB: Brings up/down network automatically... [ OK ] Started LSB: startup and shutdown a emon service. [ 24.042460] process '/sbin/netplugd' started with executable stack [ OK ] Started LSB: Start NTP daemon. Starting Compensation of systime in…evice-tree (with opposite sign)... [ OK ] Started LSB: Start zabbix-agent daemon. [ OK ] Started A high performance web server and a reverse proxy server. Starting Initialize Wiren Board on successful boot... Debian GNU/Linux 9 WB6-AKSYATYY ttymxc0 [ 27.149350] RTL871X: RTW_ADAPTIVITY_EN_ [ 27.149374] AUTO, chplan:0x20, Regulation:3,3 [ 27.157667] RTL871X: RTW_ADAPTIVITY_MODE_ [ 27.157672] NORMAL WB6-AKSYATYY login: [ 28.001467] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 224, base_baud = 5000000) is a IMX [ 30.693546] RTL871X: assoc success [ 30.697060] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 30.824503] Micrel KSZ8081 or KSZ8091 2188000.ethernet-2:03: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet-2:03, irq=POLL) [ 31.867573] 2288000.serial: ttymxc7 at MMIO 0x2288000 (irq = 225, base_baud = 5000000) is a IMX [ 32.876439] gpio-19 (wbmz2_i2c_0): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 32.959637] gpio-18 (wbmz2_i2c_0): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 34.226213] i2c-gpio wbmz2_i2c_0: using lines 19 (SDA) and 18 (SCL) [ 55.231757] usb 2-1.3: new high-speed USB device number 4 using ci_hdrc [ 55.442067] usb 2-1.3: New USB device found, idVendor=1286, idProduct=812a, bcdDevice= 0.00 [ 55.450494] usb 2-1.3: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 55.457898] usb 2-1.3: Product: WUKONG [ 55.461683] usb 2-1.3: Manufacturer: MARVELL [ 55.704847] usb 2-1.3: can't set config #1, error -71 [ 55.785319] usb 2-1.3: USB disconnect, device number 4 [ 61.891709] usb 2-1.3: new high-speed USB device number 5 using ci_hdrc [ 62.082383] usb 2-1.3: config 1 has an invalid interface number: 5 but max is 4 [ 62.089752] usb 2-1.3: config 1 has no interface number 3 [ 62.191959] usb 2-1.3: New USB device found, idVendor=1e0e, idProduct=9011, bcdDevice= 1.00 [ 62.200375] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 62.207772] usb 2-1.3: Product: Mobile Composite Device Bus [ 62.213375] usb 2-1.3: Manufacturer: Marvell [ 62.217650] usb 2-1.3: SerialNumber: 200806006809080000 [ 62.688398] usbcore: registered new interface driver cdc_ether [ 62.719841] usbcore: registered new interface driver option [ 62.834842] rndis_host 2-1.3:1.0 usb0: register 'rndis_host' at usb-ci_hdrc.1-1.3, RNDIS device, 96:ee:a8:ff:fa:de [ 62.861847] usbserial: USB Serial support registered for GSM modem (1-port) [ 62.957686] option 2-1.3:1.2: GSM modem (1-port) converter detected [ 62.970615] usbcore: registered new interface driver rndis_host [ 63.011559] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 63.020028] option 2-1.3:1.4: GSM modem (1-port) converter detected [ 63.117964] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 63.184923] option 2-1.3:1.5: GSM modem (1-port) converter detected [ 63.288255] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB2 root Password: Last login: Thu Aug 11 08:39:16 UTC 2022 from 192.168.44.1 on pts/0  _ _ _ __ _(_)_ __ ___ _ __ | |__ ___ __ _ _ __ __| | \ \ /\ / / | '__/ _ \ '_ \| '_ \ / _ \ / _` | '__/ _` | \ V V /| | | | __/ | | | |_) | (_) | (_| | | | (_| | \_/\_/ |_|_| \___|_| |_|_.__/ \___/ \__,_|_| \__,_| Welcome to Wiren Board 6.8.2 (s/n AKSYATYY), release wb-2204 (as stable) Linux WB6-AKSYATYY 5.10.35-wb111 #1 Wed Apr 20 13:39:52 UTC 2022 armv7l GNU/Linux root@WB6-AKSYATYY:~# ip arebootbotip apon Megafon[16@nano /etc/ppp/peers/Megafon root@WB6-AKSYATYY:~# pon Megafon[1@ff Megafonifup ppp0ls -lA /dev/ttyGSM* lrwxrwxrwx 1 root root 7 Aug 11 08:53 /dev/ttyGSM -> ttymxc7 root@WB6-AKSYATYY:~# ls -lA /dev/ttyGSM* lrwxrwxrwx 1 root root 7 Aug 11 08:53 /dev/ttyGSM -> ttymxc7 root@WB6-AKSYATYY:~# ls -lA /dev/ttyGSM* lrwxrwxrwx 1 root root 7 Aug 11 08:53 /dev/ttyGSM -> ttymxc7 root@WB6-AKSYATYY:~# [ 392.068071] usb 2-1: USB disconnect, device number 2 [ 392.0787