U-Boot 2017.03-1.1.0-gaa233c0fa3 (Jun 09 2020 - 19:28:23 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 49C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 0 Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found No storage devices, perhaps not 'usb start'ed..? No USB update detected, continuing boot switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 322 bytes read in 108 ms (2 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 6304616 bytes read in 475 ms (12.7 MiB/s) MMC read: dev # 0, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt imx6ul-wirenboard670 47422 bytes read in 242 ms (190.4 KiB/s) 485 bytes read in 153 ms (2.9 KiB/s) Applying DT overlay wb6-nogsm 597 bytes read in 276 ms (2 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu 509 bytes read in 256 ms (1000 Bytes/s) Applying DT overlay wb6-noradio 334 bytes read in 238 ms (1000 Bytes/s) Applying DT overlay wb6-eth1 254 bytes read in 171 ms (1000 Bytes/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x82000000 [ 0x000000 - 0x603368 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 9ef32000, end 9ef54fff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb172 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Wed Oct 16 09:17:25 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 6.7.0 (i.MX6UL/ULL) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait ro [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 489364K/524288K available (8192K kernel code, 728K rwdata, 2776K rodata, 1024K init, 283K bss, 18540K reserved, 16384K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x234/0x3dc with crng_init=0 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000019] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000058] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002767] Console: colour dummy device 80x30 [ 0.002828] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002865] pid_max: default: 32768 minimum: 301 [ 0.003264] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.003300] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.004987] CPU: Testing write buffer coherency: ok [ 0.006205] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.007086] devtmpfs: initialized [ 0.024687] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.025196] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.025239] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.026605] pinctrl core: initialized pinctrl subsystem [ 0.028563] NET: Registered protocol family 16 [ 0.030791] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.032724] thermal_sys: Registered thermal governor 'step_wise' [ 0.033004] cpuidle: using governor menu [ 0.215545] vdd1p1: supplied by regulator-dummy [ 0.227236] vdd3p0: supplied by regulator-dummy [ 0.239008] cpu: supplied by regulator-dummy [ 0.250723] vddsoc: supplied by regulator-dummy [ 0.586843] No ATAGs? [ 0.586901] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.586921] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.587517] debugfs: Directory 'dummy-iomuxc-gpr@20e4000' with parent 'regmap' already present! [ 0.588166] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.589640] imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000 [ 0.589680] imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl driver [ 0.632073] mxs-dma 1804000.dma-apbh: initialized [ 0.637352] SCSI subsystem initialized [ 0.637828] usbcore: registered new interface driver usbfs [ 0.637949] usbcore: registered new interface driver hub [ 0.638059] usbcore: registered new device driver usb [ 0.638906] gpio-48 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.639033] gpio-49 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.639946] i2c-gpio i2c_rtc: using lines 48 (SDA) and 49 (SCL) [ 0.640676] gpio-76 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.640800] gpio-67 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.641418] i2c-gpio i2c_eeprom1: using lines 76 (SDA) and 67 (SCL) [ 0.642102] gpio-70 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.642227] gpio-71 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.642792] i2c-gpio i2c_eeprom2: using lines 70 (SDA) and 71 (SCL) [ 0.644423] gpio-30 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.644787] i2c i2c-1: IMX I2C adapter registered [ 0.645520] mc: Linux media interface: v0.10 [ 0.645630] videodev: Linux video capture interface: v2.00 [ 0.645776] pps_core: LinuxPPS API ver. 1 registered [ 0.645796] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.645850] PTP clock support registered [ 0.646436] Advanced Linux Sound Architecture Driver Initialized. [ 0.648557] clocksource: Switched to clocksource mxc_timer1 [ 0.666311] NET: Registered protocol family 2 [ 0.667594] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.667693] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.667797] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.667901] TCP: Hash tables configured (established 4096 bind 4096) [ 0.668089] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.668144] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.668459] NET: Registered protocol family 1 [ 0.669505] RPC: Registered named UNIX socket transport module. [ 0.669543] RPC: Registered udp transport module. [ 0.669560] RPC: Registered tcp transport module. [ 0.669578] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.670653] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.673409] Initialise system trusted keyrings [ 0.673892] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.685486] NFS: Registering the id_resolver key type [ 0.685568] Key type id_resolver registered [ 0.685588] Key type id_legacy registered [ 0.926386] Key type asymmetric registered [ 0.926425] Asymmetric key parser 'x509' registered [ 0.926548] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.926572] io scheduler mq-deadline registered [ 0.926592] io scheduler kyber registered [ 0.938311] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.938359] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.942279] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 21, base_baud = 5000000) is a IMX [ 1.605016] printk: console [ttymxc0] enabled [ 1.611460] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59, base_baud = 5000000) is a IMX [ 1.655210] imx_rngc 2284000.rng: Freescale RNGB registered (HW revision 2.129) [ 1.662640] random: fast init done [ 1.666593] random: crng init done [ 1.706354] brd: module loaded [ 1.724499] loop: module loaded [ 1.728024] at24 5-0050: supply vcc not found, using dummy regulator [ 1.739517] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.746472] at24 6-0050: supply vcc not found, using dummy regulator [ 1.757824] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.770283] libphy: Fixed MDIO Bus: probed [ 1.777295] pps pps0: new PPS source ptp0 [ 1.817460] libphy: fec_enet_mii_bus: probed [ 1.822924] fec 20b4000.ethernet ethFEC0: registered PHC device 0 [ 1.949307] pps pps1: new PPS source ptp1 [ 1.955872] libphy: fec_enet_mii_bus: probed [ 1.964595] fec 2188000.ethernet ethFEC1: registered PHC device 1 [ 1.971687] PPP generic driver version 2.4.2 [ 1.976366] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.983008] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.988770] usbcore: registered new interface driver usb-storage [ 1.995015] usbcore: registered new interface driver usbserial_generic [ 2.001683] usbserial: USB Serial support registered for generic [ 2.062994] rtc-pcf8563 4-0051: registered as rtc0 [ 2.079796] rtc-pcf8563 4-0051: setting system clock to 2024-11-29T10:50:13 UTC (1732877413) [ 2.098087] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc1 [ 2.104637] i2c /dev entries driver [ 2.111376] lm75 4-0048: supply vs not found, using dummy regulator [ 2.122987] lm75 4-0048: hwmon0: sensor 'lm75b' [ 2.243168] sdhci: Secure Digital Host Controller Interface driver [ 2.249450] sdhci: Copyright(c) Pierre Ossman [ 2.253821] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.267670] ledtrig-cpu: registered to indicate activity on CPUs [ 2.275476] usbcore: registered new interface driver usbhid [ 2.281177] usbhid: USB HID core driver [ 2.296203] Initializing XFRM netlink socket [ 2.300652] mmc0: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 2.309453] NET: Registered protocol family 10 [ 2.316573] Segment Routing with IPv6 [ 2.320695] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.328510] NET: Registered protocol family 17 [ 2.333729] Key type dns_resolver registered [ 2.342376] registered taskstats version 1 [ 2.346513] Loading compiled-in X.509 certificates [ 2.370195] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 2.382184] of_cfs_init [ 2.384880] of_cfs_init: OK [ 2.392594] ALSA device list: [ 2.395581] No soundcards found. [ 2.399493] Waiting for root device /dev/mmcblk0p3... [ 2.408119] mmc0: new DDR MMC card at address 0001 [ 2.413867] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 2.418924] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 2.425240] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 2.431589] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB, chardev (245:0) [ 2.442307] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.467188] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.475725] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 2.487793] devtmpfs: mounted [ 2.495972] Freeing unused kernel memory: 1024K [ 2.501464] Run /sbin/init as init process [ 2.940740] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 2.965191] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 3.009934] systemd[1]: Set hostname to . [ 4.630398] systemd[1]: Queued start job for default target Graphical Interface. [ 4.645779] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.682133] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 4.727129] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.776354] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 4.825052] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.860581] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 4.900866] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 4.939723] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 4.953322] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 4.990282] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.019607] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.060084] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.091920] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.131307] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 5.192265] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 5.203064] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.240599] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.291042] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.332226] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.370970] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 5.389882] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.412475] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 5.486094] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 5.541766] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 5.568901] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 5.630447] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 5.669632] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 5.698620] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.722242] fuse: init (API version 7.32) [ 5.731957] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 5.799813] systemd[1]: Starting Journal Service... Starting Journal Service... [ 5.879271] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 5.925076] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.047489] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted 6.080186] systemd[1]: Mounted /sys/kernel/config. ;39mPOSIX Message Queue File System. [ OK ] Mounted 6.100215] systemd[1]: Mounted Kernel Debug File System. ;39m/sys/kernel/config. [ OK ] Mounted Kernel Debug File System. [ 6.115947] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.141806] systemd[1]: modprobe@drm.service: Succeeded. [ 6.149277] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished 6.157366] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.165449] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 6.179828] systemd[1]: Mounting FUSE Control File System... Mounting FUSE Control File System... [ 6.204272] systemd[1]: Started File System Check Daemon to report status. [ OK ] Started File System Check Daemon to report status. [ 6.227044] systemd[1]: Mounted FUSE Control File System. [ OK ] Mounted FUSE Control File System. [ 7.139148] systemd[1]: Finished File System Check on Root Device. [ OK ] Finished File System Check on Root Device. [ 7.211832] systemd[1]: Finished Load Kernel Modules. [ OK ] Finished Load Kernel Modules. [ 7.252317] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 7.349875] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 7.535056] EXT4-fs (mmcblk0p3): re-mounted. Opts: discard,errors=remount-ro [ 7.579024] systemd[1]: Finished Apply Kernel Variables. [ OK ] Finished Apply Kernel Variables. [ 7.620452] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished Remount Root and Kernel File Systems. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Coldplug All udev Devices. Starting Helper to synchronize boot up for ifupdown... [ OK ] Started Rule-based Manager for Device Events and Files. [ 10.324151] Driver for 1-wire Dallas network protocol. [ 10.372495] gpio-68 (onewire_w1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 10.449340] gpio-11 (onewire_w2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ OK ] Found device /dev/ttymxc0. [ 11.207925] fec 20b4000.ethernet eth1: renamed from ethFEC0 [ 12.030962] imx_usb 2184000.usb: No over current polarity defined [ 12.090084] fec 2188000.ethernet eth0: renamed from ethFEC1 [ 12.147225] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 12.188828] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 12.298705] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 12.325896] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 12.334273] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.341544] usb usb1: Product: EHCI Host Controller [ 12.346428] usb usb1: Manufacturer: Linux 5.10.35-wb172 ehci_hcd [ 12.352461] usb usb1: SerialNumber: ci_hdrc.0 [ 12.641403] hub 1-0:1.0: USB hub found [ 12.705221] hub 1-0:1.0: 1 port detected [ 12.755045] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 12.802537] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 12.898678] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 12.928885] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 12.937176] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.944460] usb usb2: Product: EHCI Host Controller [ 12.949378] usb usb2: Manufacturer: Linux 5.10.35-wb172 ehci_hcd [ 12.955393] usb usb2: SerialNumber: ci_hdrc.1 [ 13.078671] usb usb1-port1: over-current condition [ 13.223307] hub 2-0:1.0: USB hub found [ 13.289126] hub 2-0:1.0: 1 port detected [ 13.578659] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 13.698717] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 13.840251] usb 1-1: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00 [ 13.848486] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 13.855710] usb 1-1: Product: Disk 2.0 [ 13.859487] usb 1-1: Manufacturer: USB [ 13.863261] usb 1-1: SerialNumber: F9AAE716D1D542C1 [ 13.989428] usb 2-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 13.997659] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 14.136988] usb-storage 1-1:1.0: USB Mass Storage device detected [ 14.143713] hub 2-1:1.0: USB hub found [ 14.154016] hub 2-1:1.0: 4 ports detected [ 14.196657] scsi host0: usb-storage 1-1:1.0 [ 14.498672] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 14.700400] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00 [ 14.708846] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 14.716191] usb 2-1.1: Product: 802.11n WLAN Adapter [ 14.721207] usb 2-1.1: Manufacturer: Realtek [ 14.725486] usb 2-1.1: SerialNumber: 00e04c000001 [ 15.290914] scsi 0:0:0:0: Direct-Access USB Disk 2.0 8.07 PQ: 0 ANSI: 4 [ 15.325131] sd 0:0:0:0: [sda] 30433280 512-byte logical blocks: (15.6 GB/14.5 GiB) [ 15.356750] sd 0:0:0:0: [sda] Write Protect is off [ 15.383872] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 15.438178] sda: sda1 [ 15.460638] sd 0:0:0:0: [sda] Attached SCSI removable disk [ OK ] Found device /dev/mmcblk0p5. [ 15.865718] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 15.889746] Bluetooth: Core ver 2.22 [ 15.906716] NET: Registered protocol family 31 [ 15.911282] Bluetooth: HCI device and connection manager initialized [ 15.940262] Bluetooth: HCI socket layer initialized [ 15.963384] Bluetooth: L2CAP socket layer initialized [ 15.986123] Bluetooth: SCO socket layer initialized [ OK ] Found device /dev/mmcblk0p6. [ 16.093594] usbcore: registered new interface driver btusb [ 16.105063] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 16.117869] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 16.124094] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 16.134339] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 16.140983] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 16.150323] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 16.235620] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 16.305696] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 16.838684] RTL871X: module init start [ 16.842466] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... [ 16.969699] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 Starting File System Check on /dev/mmcblk0p6... [ 17.074186] RTL871X: rtw_ndev_init(wlan0) [ 17.104376] RTL871X: rtw_ndev_init(wlan1) [ 17.121752] usbcore: registered new interface driver rtl8723bu [ 17.127632] RTL871X: module init ret=0 Starting Load/Save RF Kill Switch Status... [ 17.972130] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ 18.152815] usbcore: registered new interface driver rtl8xxxu [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 19.174460] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Found device RTL8723BU 802.11b/g/n WLAN Adapter. [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. [ OK ] Started ifup for eth1. [ OK ] Started ifup for wlan0. Starting Flush Journal to Persistent Storage... Starting prepare mounts and symlinks to config files... [ 19.856408] systemd-journald[122]: Received client request to flush runtime journal. [ 19.912589] systemd-journald[122]: File /var/log/journal/5d2f1caf240e4238b9d1e1f30bf8d1ce/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Authorization Manager... Starting User Login Management... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ 24.631221] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.636560] Bluetooth: BNEP filters: protocol multicast [ 24.786592] Bluetooth: BNEP socket layer initialized [ OK ] Started Bluetooth service. [ OK ] Started Authorization Manager. [ OK ] Reached target Bluetooth. Starting Modem Manager... [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started WPA supplicant. Starting Hostname Service... [ OK ] Started User Login Management. [ OK ] Started Modem Manager. [ OK ] Started Hostname Service. [ OK ] Started Network Manager. Starting Network Manager Wait Online... Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ 32.581510] Micrel KSZ8081 or KSZ8091 2188000.ethernet-2:03: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet-2:03, irq=POLL) [ OK ] Finished Network Manager Wait Online. [FAILED] Failed to start Initialize…en Board Device Tree overlays. See 'systemctl status wb-hwconf-manager.service' for details. [DEPEND] Dependency failed for MQTT… for GPIO-controlled switches. [DEPEND] Dependency failed for MQTT Driver for ADC. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ INFO ] Skipped Power on GSM modem. [ 49.688867] SMSC LAN8710/LAN8720 2188000.ethernet-2:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet-2:00, irq=POLL) [ *** ] (1 of 2) A start job is running for…k interfaces (1min 14s / 5min 39s)