1
19200
even
off
0
0
0
c

// Setting ranges:
// Row 1: BMS Slave address = [1..247]
//
// Row 2: BMS Baud rate = [19200 or 9600]
//
// Row 3: BMS Parity = [even, odd or no]
//
// Row 4: HP integration via BMS = [on or off]
//        Example: on = enables dynamic heat curve offset in integrated heat pump, and integrated heat pump defrost state
//
// Row 5: Exclude zone from heat curve offset calculation = [1,2,3,4,5,6,7,8,9,10,11,12, or 0=no channels]
//        Select master channels of the zones (lowest numbered channel in the zone) to exclude.
//        The zone subchannels follow the state of the master channel.
//        Example: 3,5,12 = exludes channels with master channels 3, 5 and 12
//
// Row 6: Bypass zone = [1,2,3,4,5,6,7,8,9,10,11,12 or 0=no channels]
//        Select master channels of the zones (lowest numbered channel in the zone) to bypass, MAXIMUM 2 channels.
//        The zone subchannels follow the state of the master channel.
//        Example: 4,12 = bypasses zones with master channels 4 and 12
//
// Row 7: Ceiling Cooling channel = [1,2,3,4,5,6,7,8,9,10,11,12 or 0=no channels]
//        The zone subchannels will NOT follow the state of the master channel.
//        Example: 1,4,10 = set ceiling cooling to channels 1, 4 and 10
//
// Row 8: BMS Temperature format = [c or f]
//        c = Celsius, or f = Fahrenheit.