=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2025.08.20 16:10:18 =~=~=~=~=~=~=~=~=~=~=~= đ [EC] Watchdog is timed out, reset power. [EC] No voltage on 3.3V line, try to switch on PMIC throught PWRON U-Boot SPL 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) DRAM: 1024 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 1 ms (318.4 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502464 bytes read in 172 ms (36.1 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57964 bytes read in 11 ms (5 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x633840 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x7ec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000025] Switching to timer-based delay loop, resolution 41ns [ 0.000414] Console: colour dummy device 80x30 [ 0.000494] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000525] pid_max: default: 32768 minimum: 301 [ 0.000785] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000814] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003362] CPU: Testing write buffer coherency: ok [ 0.003999] /cpus/cpu@0 missing clock-frequency property [ 0.004070] /cpus/cpu@1 missing clock-frequency property [ 0.004137] /cpus/cpu@2 missing clock-frequency property [ 0.004209] /cpus/cpu@3 missing clock-frequency property [ 0.004236] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005622] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.005856] rcu: Hierarchical SRCU implementation. [ 0.006816] smp: Bringing up secondary CPUs ... [ 0.019588] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031466] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.042972] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.043215] smp: Brought up 1 node, 4 CPUs [ 0.043262] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.043278] CPU: All CPU(s) started in HYP mode. [ 0.043294] CPU: Virtualization extensions available. [ 0.044430] devtmpfs: initialized [ 0.066662] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.067383] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.067549] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.069545] pinctrl core: initialized pinctrl subsystem [ 0.071494] NET: Registered protocol family 16 [ 0.076195] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.077631] thermal_sys: Registered thermal governor 'step_wise' [ 0.079112] No ATAGs? [ 0.079600] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.079635] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.165128] SCSI subsystem initialized [ 0.166195] usbcore: registered new interface driver usbfs [ 0.166392] usbcore: registered new interface driver hub [ 0.166583] usbcore: registered new device driver usb [ 0.167395] mc: Linux media interface: v0.10 [ 0.167509] videodev: Linux video capture interface: v2.00 [ 0.167635] pps_core: LinuxPPS API ver. 1 registered [ 0.167660] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.167709] PTP clock support registered [ 0.168154] Advanced Linux Sound Architecture Driver Initialized. [ 0.169600] clocksource: Switched to clocksource arch_sys_counter [ 1.278299] NET: Registered protocol family 2 [ 1.279445] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.280064] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.280382] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.280753] TCP: Hash tables configured (established 8192 bind 8192) [ 1.281099] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.281220] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.281657] NET: Registered protocol family 1 [ 1.282757] RPC: Registered named UNIX socket transport module. [ 1.282786] RPC: Registered udp transport module. [ 1.282803] RPC: Registered tcp transport module. [ 1.282819] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.284679] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.288259] Initialise system trusted keyrings [ 1.288593] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.303973] NFS: Registering the id_resolver key type [ 1.304058] Key type id_resolver registered [ 1.304078] Key type id_legacy registered [ 1.468220] Key type asymmetric registered [ 1.468257] Asymmetric key parser 'x509' registered [ 1.468470] bounce: pool size: 64 pages [ 1.468562] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.468585] io scheduler mq-deadline registered [ 1.468603] io scheduler kyber registered [ 1.470014] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.511387] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.535230] brd: module loaded [ 1.553037] loop: module loaded [ 1.562490] libphy: Fixed MDIO Bus: probed [ 1.564913] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.566136] libphy: sun4i_mii_bus: probed [ 1.568567] CAN device driver interface [ 1.572911] PPP generic driver version 2.4.2 [ 1.573209] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.573229] ehci-platform: EHCI generic platform driver [ 1.574801] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.574949] ohci-platform: OHCI generic platform driver [ 1.577267] usbcore: registered new interface driver usb-storage [ 1.577460] usbcore: registered new interface driver usbserial_generic [ 1.577518] usbserial: USB Serial support registered for generic [ 1.580986] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 1.581041] sun6i-rtc 1c20400.rtc: RTC enabled [ 1.582368] i2c /dev entries driver [ 1.593313] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.598161] ledtrig-cpu: registered to indicate activity on CPUs [ 1.599156] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.599726] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.600300] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.600556] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.600787] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.600990] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 1.601216] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 1.601417] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 1.602010] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 1.602799] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 1.605701] usbcore: registered new interface driver usbhid [ 1.605722] usbhid: USB HID core driver [ 1.615750] Initializing XFRM netlink socket [ 1.616619] NET: Registered protocol family 10 [ 1.617812] Segment Routing with IPv6 [ 1.617942] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.620356] NET: Registered protocol family 17 [ 1.620405] can: controller area network core [ 1.620554] NET: Registered protocol family 29 [ 1.620578] can: raw protocol [ 1.620600] can: broadcast manager protocol [ 1.620632] can: netlink gateway - max_hops=1 [ 1.620854] can: SAE J1939 [ 1.621301] Key type dns_resolver registered [ 1.621415] Registering SWP/SWPB emulation handler [ 1.621574] registered taskstats version 1 [ 1.621651] Loading compiled-in X.509 certificates [ 1.654901] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.661710] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.663953] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.670192] printk: console [ttyS0] disabled [ 1.670405] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 2.613947] printk: console [ttyS0] enabled [ 2.620234] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.627039] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.633695] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.641056] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.651799] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.670404] wbec-rtc wbec-rtc.4.auto: DMA mask not set [ 2.677103] wbec-rtc wbec-rtc.4.auto: registered as rtc0 [ 2.682726] wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-08-20T13:10:34 UTC (1755695434) [ 2.695787] wbec spi0.0: WBEC device added [ 2.701527] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.709726] libphy: sun4i_mii_bus: probed [ 2.714671] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.721774] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.728438] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.739459] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.746313] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.752953] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.760508] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.771131] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.779785] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.786578] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.793111] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.800491] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.810873] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.830135] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.850133] vcc-3v3: supplied by regulator-dummy [ 2.855909] vdd-cpu: supplied by regulator-dummy [ 2.861728] vdd-sys: supplied by regulator-dummy [ 2.867351] dcdc4: supplied by regulator-dummy [ 2.872947] vcc-dram: supplied by regulator-dummy [ 2.877852] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.884884] vcc-gmac-phy: supplied by vcc-3v3 [ 2.890419] dc5ldo: supplied by vcc-dram [ 2.894992] tv: Bringing 700000uV into 3300000-3300000uV [ 2.901012] tv: supplied by regulator-dummy [ 2.905834] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.912238] aldo2: supplied by regulator-dummy [ 2.919175] avcc-pll: supplied by regulator-dummy [ 2.925727] eldo1: supplied by regulator-dummy [ 2.931649] eldo2: supplied by regulator-dummy [ 2.936898] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.943876] vcc-pe: supplied by regulator-dummy [ 2.949099] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.956982] vcc-sd-alt: supplied by regulator-dummy [ 2.963827] dldo2: supplied by regulator-dummy [ 2.969824] dldo3: supplied by regulator-dummy [ 2.974687] random: fast init done [ 2.979528] dldo4: supplied by regulator-dummy [ 2.985462] rtc_ldo: supplied by regulator-dummy [ 2.991497] ldo_io0: supplied by regulator-dummy [ 2.997377] ldo_io1: supplied by regulator-dummy [ 3.003104] axp20x-adc axp22x-adc: DMA mask not set [ 3.010022] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 3.020863] axp20x-i2c 0-0034: AXP20X driver loaded [ 3.028278] i2c i2c-1: using pinctrl states for GPIO recovery [ 3.034307] gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 3.043239] i2c i2c-1: using generic GPIOs for recovery [ 3.082758] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 3.091164] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 1500000) is a Allwinner sun4i [ 3.101579] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 3.109607] libphy: sun4i_mii_bus: probed [ 3.112221] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 3.244135] mmc0: new DDR MMC card at address 0001 [ 3.249864] mmcblk0: mmc0:0001 88A398 7.28 GiB [ 3.254803] mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB [ 3.261226] mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB [ 3.263507] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:c5:c7 [ 3.275650] mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0) [ 3.276438] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 3.285718] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 3.289362] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 3.300022] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 3.306166] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 3.313422] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 3.320660] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 3.325623] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 3.332418] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 3.338075] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 3.344423] libphy: stmmac: probed [ 3.602209] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.607819] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.615984] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 3.649605] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.656693] hub 1-0:1.0: USB hub found [ 3.660562] hub 1-0:1.0: 1 port detected [ 3.665729] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.671356] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.679368] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 3.709604] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.716593] hub 2-0:1.0: USB hub found [ 3.720424] hub 2-0:1.0: 1 port detected [ 3.725495] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.731111] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.739092] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.770067] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.777072] hub 3-0:1.0: USB hub found [ 3.780902] hub 3-0:1.0: 1 port detected [ 3.879696] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.886333] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.894304] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 3.974466] hub 4-0:1.0: USB hub found [ 3.978275] hub 4-0:1.0: 1 port detected [ 3.983380] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 3.990037] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 3.997953] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 4.074471] hub 5-0:1.0: USB hub found [ 4.078291] hub 5-0:1.0: 1 port detected [ 4.083396] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.090066] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 4.097861] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.105103] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 4.184517] hub 6-0:1.0: USB hub found [ 4.188341] hub 6-0:1.0: 1 port detected [ 4.201397] of_cfs_init [ 4.203969] of_cfs_init: OK [ 4.207483] ALSA device list: [ 4.210519] No soundcards found. [ 4.221655] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 4.239286] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 4.246658] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.303373] EXT4-fs (mmcblk0p2): recovery complete [ 4.308693] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.316954] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.324565] devtmpfs: mounted [ 4.332425] Freeing unused kernel memory: 1024K [ 4.337283] Run /sbin/init as init process [ 4.540081] systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time. [ 4.615439] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.642579] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.680457] systemd[1]: Set hostname to . [ 5.483850] systemd[1]: Queued start job for default target Graphical Interface. [ 5.493420] random: systemd: uninitialized urandom read (16 bytes read) [ 5.504192] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.539847] random: systemd: uninitialized urandom read (16 bytes read) [ 5.548426] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.589889] random: systemd: uninitialized urandom read (16 bytes read) [ 5.598657] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.641654] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.681381] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.720270] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.760113] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.800172] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.812210] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.850254] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.879865] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.919838] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.951129] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.990265] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 6.040847] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.050214] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.090802] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.121062] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.160490] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.200792] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.214853] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.255936] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.295843] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.336345] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 6.378735] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 6.427034] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.466858] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.490260] fuse: init (API version 7.32) [ 6.502872] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.518831] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.571544] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.587284] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.602635] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.625464] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 6.633445] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 6.644615] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 6.691122] systemd[1]: Mounted Kernel Trace File System. [ OK ] Mounted Kernel Trace File System. [ 6.732100] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.782861] systemd[1]: modprobe@drm.service: Succeeded. [ 6.789839] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.830630] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 7.110313] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. Starting Helper to synchronize boot up for ifupdown... [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Rule-based Manage…for Device Events and Files... [ OK ] Started Rule-based Manager for Device Events and Files. [ 8.109085] Driver for 1-wire Dallas network protocol. [ 8.354549] usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator [ 8.456487] wbec-adc wbec-adc.1.auto: DMA mask not set [ 8.473609] wbec-gpio wbec-gpio.2.auto: DMA mask not set [ 8.480167] wbec-watchdog wbec-watchdog.3.auto: DMA mask not set [ 8.481837] iio-rescale vin-volt: using raw+scale source channel [ 8.493674] wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set [ 8.497864] wbec-power wbec-power.6.auto: DMA mask not set [ 8.499736] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0 [ 8.509716] iio-rescale v33-volt: using raw+scale source channel [ 8.523367] iio-rescale v50-volt: using raw+scale source channel [ 8.539849] iio-rescale vbus-debug-volt: using raw+scale source channel [ 8.549086] iio-rescale vbus-network-volt: using raw+scale source channel [ 8.558576] iio-rescale a1-volt: using raw+scale source channel [ 8.567144] iio-rescale a2-volt: using raw+scale source channel [ 8.575459] iio-rescale a3-volt: using raw+scale source channel [ 8.626741] iio-rescale a4-volt: using raw+scale source channel [ 8.635073] Bluetooth: Core ver 2.22 [ 8.638804] NET: Registered protocol family 31 [ 8.643386] Bluetooth: HCI device and connection manager initialized [ 8.649853] Bluetooth: HCI socket layer initialized [ 8.653690] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.654763] Bluetooth: L2CAP socket layer initialized [ 8.654811] Bluetooth: SCO socket layer initialized [ 8.689397] usbcore: registered new interface driver btusb [ 8.732795] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 8.742693] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 8.748735] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 8.758474] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 8.765458] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 8.774752] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 8.824600] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.839119] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/mmcblk0p6. [ 9.266072] RTL871X: module init start [ 9.269953] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ OK ] Found device /dev/ttyS0. [ 9.520170] RTL871X: rtw_ndev_init(wlan0) [ 9.525518] RTL871X: rtw_ndev_init(wlan1) [ 9.530908] usbcore: registered new interface driver rtl8723bu [ 9.536789] RTL871X: module init ret=0 [ OK ] Reached target Hardware activated USB gadget. [ 9.605623] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ 9.631743] usbcore: registered new interface driver rtl8xxxu [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... [ 9.780372] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. Starting Load/Save RF Kill Switch Status... [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 10.036943] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 10.221460] systemd-journald[139]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config files... [ 10.239059] systemd-journald[139]: File /var/log/journal/39ae044ced0a479e894fa7425a03e1be/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Flush Journal to Persistent Storage. [ 10.609688] random: crng init done [ 10.613168] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... Starting Device Configuration Service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting "Package for self…& migrate IQnergy software"... [ 12.036028] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.041522] Bluetooth: BNEP filters: protocol multicast [ 12.046826] Bluetooth: BNEP socket layer initialized Starting "Watchdog for wb-rules and wb-mqtt-serial"... Starting LSB: service and resource monitoring daemon... Starting Authorization Manager... Starting Reverse SSH Tunneling... Starting User command preprocessor... Starting User Login Management... Starting User command handler service... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting IQnergy controller configurator... Starting WPA supplicant... Starting Zigbee available emulator... [FAILED] Failed to start Device Configuration Service. See 'systemctl status config-manager.service' for details. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [FAILED] Failed to start "Package f…l & migrate IQnergy software". See 'systemctl status iqnergy-software-installer.service' for details. [ OK ] Started "Watchdog for wb-rules and wb-mqtt-serial". [FAILED] Failed to start Reverse SSH Tunneling. See 'systemctl status reverse-ssh.service' for details. [FAILED] Failed to start User command preprocessor. See 'systemctl status rules-preprocessor.service' for details. [FAILED] Failed to start User command handler service. See 'systemctl status usr-cmd-handler.service' for details. [ OK ] Started IQnergy controller configurator. [FAILED] Failed to start Zigbee available emulator. See 'systemctl status zigbee-available-emulator.service' for details. [ OK ] Started Bluetooth service. [ OK ] Started User Login Management. [ OK ] Started LSB: service and resource monitoring daemon. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started WPA supplicant. [ OK ] Started Authorization Manager. [ OK ] Started Network Manager. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Network Manager Wait Online... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ 14.921140] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 14.933046] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 14.940515] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 14.948260] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 14.956687] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ 20.022110] 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 1500000) is a Allwinner sun4i [ 20.914732] RTL871X: rtw_set_802_11_connect(wlan1) fw_state=0x00000008 [ 21.177565] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 1500000) is a Allwinner sun4i [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... [ OK ] Started Live Syncing Daemon. Starting Mosquitto MQTT Broker... Starting Network Time Service... [ OK ] Started MQTT Local Backup of Metering Data. Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started Unattended Upgrades Shutdown. [ OK ] Started vnStat network traffic monitor. Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. Starting Health monitor service... [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started KNX Daemon. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [FAILED] Failed to start Health monitor service. See 'systemctl status health-monitor.service' for details. [DEPEND] Dependency failed for User command handler service. [DEPEND] Dependency failed for Zigbee available emulator. [DEPEND] Dependency failed for Data…on and transformation service. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Getty on tty1. Starting A high performanc… and a reverse proxy server... [ OK ] Stopped Reverse SSH Tunneling. Starting Reverse SSH Tunneling... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Started OpenBSD Secure Shell server. [ OK ] Finished Network Manager Wait Online. [ OK ] Started MQTT Driver for GPIO-controlled switches. [FAILED] Failed to start Reverse SSH Tunneling. See 'systemctl status reverse-ssh.service' for details. [ OK ] Stopped KNX Daemon. Starting KNX Daemon... [ OK ] Started KNX Daemon. [ OK ] Finished KNXD Configurator for Wiren Board. [ OK ] Reached target Network is Online. Starting LSB: Brings up/down network automatically... [ OK ] Started Mosquitto MQTT Broker. [ OK ] Finished Compensation of s…ice-tree (with opposite sign). Starting Unattended upgrades MQTT trigger... Starting "IQ network manager"... [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost… generating archive with data. [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. Starting Wiren Board MQTT to IEC 60870-5-104 gateway... [ OK ] Started Wiren Board MQTT KNX bridge. [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board MQTT to Modbus gateway. [ OK ] Started metrics sender. [ OK ] Started Virtual MQTT devic…r Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started Wiren Board firmware update service. [ OK ] Started Unattended upgrades MQTT trigger. [ OK ] Started "IQ network manager". [ OK ] Started Wiren Board MQTT to OPC UA gateway. [ 27.322596] process '/usr/sbin/netplugd' started with executable stack [ OK ] Started A high performance…er and a reverse proxy server. Starting Initialize Wiren Board on successful boot... Starting USB Debug Network... [ OK ] Stopped MQTT Local Backup of Metering Data. [ OK ] Started MQTT Local Backup of Metering Data. Debian GNU/Linux 11 IQ464002 ttyS0 IQ464002 login: [ 36.409120] vcc-gmac-phy: disabling [ 36.413129] dc5ldo: disabling [ 36.416533] dldo4: disabling [ 36.419874] vdd-sd-power: disabling [ 36.423446] vcc-sd: disabling [ 37.058893] RTL871X: rtw_set_802_11_connect(wlan1) fw_state=0x00000008 [ 37.933121] Mass Storage Function, version: 2009/09/11 [ 37.938318] LUN: removable file: (no medium) [ 37.955807] using random self ethernet address [ 37.960461] using random host ethernet address [ 38.055486] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 38.060099] dbg0: MAC 1a:55:89:a2:69:43 [ 38.982852] RTL871X: start auth [ 38.989134] RTL871X: auth success, start assoc [ 38.999889] RTL871X: rtw_cfg80211_indicate_connect(wlan1) BSS not found !! [ 39.006902] RTL871X: assoc success [ 39.029206] RTL871X: port switch - port0(wlan1), port1(wlan0) [ 39.199215] RTL871X: send eapol packet [ 39.208115] RTL871X: send eapol packet [ 39.215909] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 39.274279] RTL871X: set pairwise key camid:4, addr:10:7b:ef:57:63:ac, kid:0, type:AES [ 39.297134] RTL871X: set group key camid:5, addr:10:7b:ef:57:63:ac, kid:1, type:AES [ 48.409683] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 48.700611] usb 3-1: USB disconnect, device number 2 [ 54.589729] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 54.856920] usbcore: registered new interface driver cdc_ether [ 54.882707] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 3a:78:43:4f:01:a8 [ 54.893409] usbcore: registered new interface driver rndis_host [ 54.909124] usbcore: registered new interface driver option [ 54.915140] usbserial: USB Serial support registered for GSM modem (1-port) [ 54.925292] option 3-1:1.2: GSM modem (1-port) converter detected [ 54.936680] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 54.944177] option 3-1:1.4: GSM modem (1-port) converter detected [ 54.953185] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 54.960780] option 3-1:1.5: GSM modem (1-port) converter detected [ 54.968640] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 54.976572] option 3-1:1.3: GSM modem (1-port) converter detected [ 54.984103] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 59.999927] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 60.027811] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 60.036176] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 60.044409] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 61.287600] RTL871X: rtw_set_802_11_connect(wlan1) fw_state=0x00000008 [ 61.354828] RTL871X: start auth [ 61.360604] RTL871X: auth success, start assoc [ 61.368073] RTL871X: rtw_cfg80211_indicate_connect(wlan1) BSS not found !! [ 61.375006] RTL871X: assoc success [ 61.473362] RTL871X: send eapol packet [ 61.484603] RTL871X: send eapol packet [ 61.610148] RTL871X: set pairwise key camid:4, addr:50:ff:20:5b:e9:3a, kid:0, type:AES [ 61.622483] RTL871X: set group key camid:5, addr:50:ff:20:5b:e9:3a, kid:2, type:TKIP [EC] Watchdog is timed out, reset power. [EC] No voltage on 3.3V line, try to switch on PMIC throught PWRON U-Boot SPL 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) DRAM: 1024 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 1 ms (318.4 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502464 bytes read in 172 ms (36.1 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57964 bytes read in 11 ms (5 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x633840 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x7ec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000023] Switching to timer-based delay loop, resolution 41ns [ 0.000389] Console: colour dummy device 80x30 [ 0.000466] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000496] pid_max: default: 32768 minimum: 301 [ 0.000744] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000770] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003525] CPU: Testing write buffer coherency: ok [ 0.004098] /cpus/cpu@0 missing clock-frequency property [ 0.004161] /cpus/cpu@1 missing clock-frequency property [ 0.004219] /cpus/cpu@2 missing clock-frequency property [ 0.004283] /cpus/cpu@3 missing clock-frequency property [ 0.004306] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005583] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.005796] rcu: Hierarchical SRCU implementation. [ 0.007799] smp: Bringing up secondary CPUs ... [ 0.019630] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031334] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.042751] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.042982] smp: Brought up 1 node, 4 CPUs [ 0.043028] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.043044] CPU: All CPU(s) started in HYP mode. [ 0.043059] CPU: Virtualization extensions available. [ 0.044155] devtmpfs: initialized [ 0.066413] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.067699] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.067779] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.069409] pinctrl core: initialized pinctrl subsystem [ 0.071255] NET: Registered protocol family 16 [ 0.075998] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.077704] thermal_sys: Registered thermal governor 'step_wise' [ 0.079138] No ATAGs? [ 0.079538] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.079568] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.165565] SCSI subsystem initialized [ 0.166270] usbcore: registered new interface driver usbfs [ 0.166413] usbcore: registered new interface driver hub [ 0.166560] usbcore: registered new device driver usb [ 0.167248] mc: Linux media interface: v0.10 [ 0.167352] videodev: Linux video capture interface: v2.00 [ 0.167466] pps_core: LinuxPPS API ver. 1 registered [ 0.167488] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.167533] PTP clock support registered [ 0.167949] Advanced Linux Sound Architecture Driver Initialized. [ 0.169365] clocksource: Switched to clocksource arch_sys_counter [ 1.280229] NET: Registered protocol family 2 [ 1.281740] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.281819] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.281942] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.282120] TCP: Hash tables configured (established 8192 bind 8192) [ 1.282323] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.282410] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.282713] NET: Registered protocol family 1 [ 1.283590] RPC: Registered named UNIX socket transport module. [ 1.283615] RPC: Registered udp transport module. [ 1.283629] RPC: Registered tcp transport module. [ 1.283643] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.286937] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.289028] Initialise system trusted keyrings [ 1.289314] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.304917] NFS: Registering the id_resolver key type [ 1.304985] Key type id_resolver registered [ 1.305002] Key type id_legacy registered [ 1.473215] Key type asymmetric registered [ 1.473250] Asymmetric key parser 'x509' registered [ 1.473457] bounce: pool size: 64 pages [ 1.473553] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.473575] io scheduler mq-deadline registered [ 1.473592] io scheduler kyber registered [ 1.474946] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.516269] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.540139] brd: module loaded [ 1.558352] loop: module loaded [ 1.567600] libphy: Fixed MDIO Bus: probed [ 1.570300] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.571387] libphy: sun4i_mii_bus: probed [ 1.573941] CAN device driver interface [ 1.578008] PPP generic driver version 2.4.2 [ 1.578307] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.578326] ehci-platform: EHCI generic platform driver [ 1.580429] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.580520] ohci-platform: OHCI generic platform driver [ 1.582503] usbcore: registered new interface driver usb-storage [ 1.582658] usbcore: registered new interface driver usbserial_generic [ 1.582714] usbserial: USB Serial support registered for generic [ 1.586112] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 1.586161] sun6i-rtc 1c20400.rtc: RTC enabled [ 1.587444] i2c /dev entries driver [ 1.598603] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.603910] ledtrig-cpu: registered to indicate activity on CPUs [ 1.604786] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.605192] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.605717] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.605948] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.606174] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.606336] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 1.606918] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 1.607714] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 1.608177] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 1.608604] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 1.611165] usbcore: registered new interface driver usbhid [ 1.611185] usbhid: USB HID core driver [ 1.621433] Initializing XFRM netlink socket [ 1.622242] NET: Registered protocol family 10 [ 1.624538] Segment Routing with IPv6 [ 1.624809] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.625985] NET: Registered protocol family 17 [ 1.626024] can: controller area network core [ 1.626166] NET: Registered protocol family 29 [ 1.626187] can: raw protocol [ 1.626207] can: broadcast manager protocol [ 1.626235] can: netlink gateway - max_hops=1 [ 1.626429] can: SAE J1939 [ 1.626827] Key type dns_resolver registered [ 1.626933] Registering SWP/SWPB emulation handler [ 1.627061] registered taskstats version 1 [ 1.627132] Loading compiled-in X.509 certificates [ 1.660508] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.668578] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.670022] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.676174] printk: console [ttyS0] disabled [ 1.676350] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 2.620094] printk: console [ttyS0] enabled [ 2.625819] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.632657] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.639321] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.646793] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.657519] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.676016] wbec-rtc wbec-rtc.4.auto: DMA mask not set [ 2.683657] wbec-rtc wbec-rtc.4.auto: registered as rtc0 [ 2.689477] wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-08-20T13:12:36 UTC (1755695556) [ 2.703027] wbec spi0.0: WBEC device added [ 2.707992] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.717350] libphy: sun4i_mii_bus: probed [ 2.723344] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.730189] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.736808] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.746995] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.753968] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.760676] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.768171] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.778709] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.788368] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.795196] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.801656] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.808994] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.819564] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.838955] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.858456] vcc-3v3: supplied by regulator-dummy [ 2.864984] vdd-cpu: supplied by regulator-dummy [ 2.871073] vdd-sys: supplied by regulator-dummy [ 2.876911] dcdc4: supplied by regulator-dummy [ 2.882562] vcc-dram: supplied by regulator-dummy [ 2.887495] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.894540] vcc-gmac-phy: supplied by vcc-3v3 [ 2.900151] dc5ldo: supplied by vcc-dram [ 2.904730] tv: Bringing 700000uV into 3300000-3300000uV [ 2.910794] tv: supplied by regulator-dummy [ 2.915678] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.922068] aldo2: supplied by regulator-dummy [ 2.927937] avcc-pll: supplied by regulator-dummy [ 2.934196] eldo1: supplied by regulator-dummy [ 2.940653] eldo2: supplied by regulator-dummy [ 2.946311] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.953454] vcc-pe: supplied by regulator-dummy [ 2.958707] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.965798] vcc-sd-alt: supplied by regulator-dummy [ 2.971694] dldo2: supplied by regulator-dummy [ 2.977144] dldo3: supplied by regulator-dummy [ 2.981874] random: fast init done [ 2.986080] dldo4: supplied by regulator-dummy [ 2.991444] rtc_ldo: supplied by regulator-dummy [ 2.997193] ldo_io0: supplied by regulator-dummy [ 3.003044] ldo_io1: supplied by regulator-dummy [ 3.008608] axp20x-adc axp22x-adc: DMA mask not set [ 3.015431] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 3.026240] axp20x-i2c 0-0034: AXP20X driver loaded [ 3.034018] i2c i2c-1: using pinctrl states for GPIO recovery [ 3.039976] gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 3.048960] i2c i2c-1: using generic GPIOs for recovery [ 3.098486] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 3.106320] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 1500000) is a Allwinner sun4i [ 3.116821] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 3.119864] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 3.124816] libphy: sun4i_mii_bus: probed [ 3.256970] mmc0: new DDR MMC card at address 0001 [ 3.262692] mmcblk0: mmc0:0001 88A398 7.28 GiB [ 3.267636] mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB [ 3.273150] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:c5:c7 [ 3.274047] mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB [ 3.282847] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 3.287962] mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0) [ 3.294087] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 3.307895] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 3.314040] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 3.321313] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 3.328550] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 3.333546] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 3.340346] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 3.346003] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 3.352365] libphy: stmmac: probed [ 3.356302] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 3.621961] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.627578] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.635785] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 3.669367] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.676447] hub 1-0:1.0: USB hub found [ 3.680312] hub 1-0:1.0: 1 port detected [ 3.685470] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.691099] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.699090] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 3.729365] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.736368] hub 2-0:1.0: USB hub found [ 3.740213] hub 2-0:1.0: 1 port detected [ 3.745309] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.750929] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.758902] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.789875] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.796848] hub 3-0:1.0: USB hub found [ 3.800680] hub 3-0:1.0: 1 port detected [ 3.899456] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.906092] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.914067] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 3.994236] hub 4-0:1.0: USB hub found [ 3.998042] hub 4-0:1.0: 1 port detected [ 4.003247] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 4.009925] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 4.017838] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 4.094284] hub 5-0:1.0: USB hub found [ 4.098091] hub 5-0:1.0: 1 port detected [ 4.103218] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.109884] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 4.117678] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.124942] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 4.204254] hub 6-0:1.0: USB hub found [ 4.208059] hub 6-0:1.0: 1 port detected [ 4.221191] of_cfs_init [ 4.223768] of_cfs_init: OK [ 4.227272] ALSA device list: [ 4.230288] No soundcards found. [ 4.241961] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 4.257964] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 4.265348] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.321586] EXT4-fs (mmcblk0p2): recovery complete [ 4.326922] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.335168] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.342817] devtmpfs: mounted [ 4.350774] Freeing unused kernel memory: 1024K [ 4.355584] Run /sbin/init as init process [ 4.560193] systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time. [ 4.628449] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.652843] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.690264] systemd[1]: Set hostname to . [ 5.495855] systemd[1]: Queued start job for default target Graphical Interface. [ 5.505263] random: systemd: uninitialized urandom read (16 bytes read) [ 5.516053] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.549647] random: systemd: uninitialized urandom read (16 bytes read) [ 5.558225] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.599645] random: systemd: uninitialized urandom read (16 bytes read) [ 5.608380] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.651400] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.691161] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.730059] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.769881] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.809853] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.821941] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.860010] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.889657] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.929573] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.960636] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 6.000028] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 6.050798] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.060169] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.100654] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.140696] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.180397] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.220524] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.234579] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.276374] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.315624] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.356129] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 6.398538] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 6.446828] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.486761] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.510317] fuse: init (API version 7.32) [ 6.522505] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.538520] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.591725] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.608820] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.624763] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.650855] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 6.658860] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 6.670022] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System[0[ 6.681074] systemd[1]: Mounted Kernel Trace File System. m. [ OK ] Mounted Kernel Trace File System[0[ 6.693957] systemd[1]: Finished Create list of static device nodes for the current kernel. m. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.719932] systemd[1]: modprobe@drm.service: Succeeded. [ 6.727170] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.761818] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.769055] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 6.812115] systemd[1]: Finished File System Check on Root Device. [ OK ] Finished File System Check on Root Device. [ 6.852303] systemd[1]: Finished Load Kernel Modules. [ OK ] Finished Load Kernel Modules. [ 6.890332] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 7.085241] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 8.049080] Driver for 1-wire Dallas network protocol. [ 8.287701] usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator [ 8.357823] wbec-adc wbec-adc.1.auto: DMA mask not set [ 8.394827] iio-rescale vin-volt: using raw+scale source channel [ 8.401764] wbec-gpio wbec-gpio.2.auto: DMA mask not set [ 8.409865] iio-rescale v33-volt: using raw+scale source channel [ 8.430499] wbec-power wbec-power.6.auto: DMA mask not set [ 8.438753] wbec-watchdog wbec-watchdog.3.auto: DMA mask not set [ 8.468404] iio-rescale v50-volt: using raw+scale source channel [ 8.488855] wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set [ 8.495037] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0 [ 8.531933] iio-rescale vbus-debug-volt: using raw+scale source channel [ 8.539653] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.547070] iio-rescale vbus-network-volt: using raw+scale source channel [ 8.549695] Bluetooth: Core ver 2.22 [ 8.558065] NET: Registered protocol family 31 [ 8.562625] Bluetooth: HCI device and connection manager initialized [ 8.569040] Bluetooth: HCI socket layer initialized [ 8.570260] iio-rescale a1-volt: using raw+scale source channel [ 8.571728] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.574085] Bluetooth: L2CAP socket layer initialized [ 8.578478] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 8.586707] iio-rescale a2-volt: using raw+scale source channel [ 8.591588] Bluetooth: SCO socket layer initialized [ 8.660104] iio-rescale a3-volt: using raw+scale source channel [ 8.683206] iio-rescale a4-volt: using raw+scale source channel [ 8.772309] usbcore: registered new interface driver btusb [ 8.775399] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 8.792567] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 8.798638] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 8.837113] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 8.843727] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 8.853050] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ OK ] Found device /dev/mmcblk0p5. [ 8.978781] RTL871X: module init start [ 8.982662] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ OK ] Found device /dev/mmcblk0p6. [ 9.156249] RTL871X: rtw_ndev_init(wlan0) [ 9.161756] RTL871X: rtw_ndev_init(wlan1) [ 9.167308] usbcore: registered new interface driver rtl8723bu [ 9.173252] RTL871X: module init ret=0 [ OK ] Found device /dev/ttyS0. [ 9.308644] usbcore: registered new interface driver rtl8xxxu [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... [ 9.725404] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 Starting Load/Save RF Kill Switch Status... [ 9.759548] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 9.997732] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 10.181389] systemd-journald[140]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config files... [ 10.201682] systemd-journald[140]: File /var/log/journal/39ae044ced0a479e894fa7425a03e1be/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Flush Journal to Persistent Storage. [ 10.569487] random: crng init done [ 10.572943] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... Starting Device Configuration Service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting "Package for self…& migrate IQnergy software"... [ 12.039927] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.045355] Bluetooth: BNEP filters: protocol multicast [ 12.050859] Bluetooth: BNEP socket layer initialized Starting "Watchdog for wb-rules and wb-mqtt-serial"... Starting LSB: service and resource monitoring daemon... Starting Authorization Manager... Starting Reverse SSH Tunneling... Starting User command preprocessor... Starting User Login Management... Starting User command handler service... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting IQnergy controller configurator... Starting WPA supplicant... Starting Zigbee available emulator... [FAILED] Failed to start Device Configuration Service. See 'systemctl status config-manager.service' for details. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [FAILED] Failed to start "Package f…l & migrate IQnergy software". See 'systemctl status iqnergy-software-installer.service' for details. [ OK ] Started "Watchdog for wb-rules and wb-mqtt-serial". [FAILED] Failed to start Reverse SSH Tunneling. See 'systemctl status reverse-ssh.service' for details. [ OK ] Started User command preprocessor. [FAILED] Failed to start User command handler service. See 'systemctl status usr-cmd-handler.service' for details. [ OK ] Started IQnergy controller configurator. [FAILED] Failed to start Zigbee available emulator. See 'systemctl status zigbee-available-emulator.service' for details. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started User Login Management. [ OK ] Started WPA supplicant. [ OK ] Started LSB: service and resource monitoring daemon. [ OK ] Started Bluetooth service. [ OK ] Started Authorization Manager. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Started Network Manager. Starting Network Manager Wait Online... [ OK ] Started Hostname Service. Starting Network Manager Script Dispatcher Service... [ OK ] Started Modem Manager. [ OK ] Started Network Manager Script Dispatcher Service. [ 14.750821] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 14.767533] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 14.775060] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 14.783153] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 14.790798] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ 19.948262] 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 1500000) is a Allwinner sun4i [ 20.594568] RTL871X: rtw_set_802_11_connect(wlan1) fw_state=0x00000008 [ 20.867519] RTL871X: start auth [ 20.872699] RTL871X: auth success, start assoc [ 20.880341] RTL871X: rtw_cfg80211_indicate_connect(wlan1) BSS not found !! [ 20.887327] RTL871X: assoc success [ 20.913677] RTL871X: port switch - port0(wlan1), port1(wlan0) [ 21.081482] RTL871X: send eapol packet [ 21.090555] RTL871X: send eapol packet [ 21.095637] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 21.150312] RTL871X: set pairwise key camid:4, addr:10:7b:ef:57:63:ac, kid:0, type:AES [ 21.167595] RTL871X: set group key camid:5, addr:10:7b:ef:57:63:ac, kid:1, type:AES [ 21.241801] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 1500000) is a Allwinner sun4i [ OK ] Finished Network Manager Wait Online. [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Stopped Reverse SSH Tunneling. Starting Reverse SSH Tunneling... [ OK ] Started Reverse SSH Tunneling. [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... [ OK ] Started Live Syncing Daemon. Starting Mosquitto MQTT Broker... Starting Network Time Service... [ OK ] Started MQTT Local Backup of Metering Data. Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started Unattended Upgrades Shutdown. [ OK ] Started vnStat network traffic monitor. Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. Starting Health monitor service... [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started KNX Daemon. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [FAILED] Failed to start Health monitor service. See 'systemctl status health-monitor.service' for details. [DEPEND] Dependency failed for Data…on and transformation service. [DEPEND] Dependency failed for User command handler service. [DEPEND] Dependency failed for Zigbee available emulator. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Getty on tty1. Stopping KNX Daemon... Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Stopped KNX Daemon. [ OK ] Started MQTT Driver for GPIO-controlled switches. Starting KNX Daemon... [ OK ] Finished Compensation of s…ice-tree (with opposite sign). [ OK ] Started KNX Daemon. [ OK ] Finished KNXD Configurator for Wiren Board. [ OK ] Reached target Network is Online. Starting LSB: Brings up/down network automatically... [ OK ] Started Mosquitto MQTT Broker. Starting Unattended upgrades MQTT trigger... Starting "IQ network manager"... [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost… generating archive with data. [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. Starting Wiren Board MQTT to IEC 60870-5-104 gateway... [ OK ] Started Wiren Board MQTT KNX bridge. [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board MQTT to Modbus gateway. [ OK ] Started metrics sender. [ OK ] Started Virtual MQTT devic…r Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started Wiren Board firmware update service. [ 26.906062] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 26.940642] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 26.949466] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 26.957767] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 26.965933] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ OK ] Started Unattended upgrades MQTT trigger. [ OK ] Started "IQ network manager". [ OK ] Started Wiren Board MQTT to OPC UA gateway. [ 27.616800] process '/usr/sbin/netplugd' started with executable stack [ 28.249559] RTL871X: rtw_set_802_11_connect(wlan1) fw_state=0x00000008 [ 28.286242] RTL871X: start auth [ OK ] Started A high performance…er and a reverse proxy server. Starting Initialize Wiren Board on successful boot... Starting USB Debug Network... [ 28.603224] RTL871X: auth success, start assoc [ 28.611242] RTL871X: rtw_cfg80211_indicate_connect(wlan1) BSS not found !! [ 28.618367] RTL871X: assoc success [ 28.716482] RTL871X: send eapol packet [ 28.728067] RTL871X: send eapol packet [ 28.801011] RTL871X: rtw_tkip_decrypt(wlan1) gkey installed. no_gkey_bc_cnt:1, no_gkey_mc_cnt:0 [ 28.894675] RTL871X: set pairwise key camid:4, addr:50:ff:20:5b:e9:3a, kid:0, type:AES [ 28.972129] RTL871X: set group key camid:5, addr:50:ff:20:5b:e9:3a, kid:2, type:TKIP [ OK ] Stopped MQTT Local Backup of Metering Data. [ OK ] Started MQTT Local Backup of Metering Data. Debian GNU/Linux 11 IQ464002 ttyS0 IQ464002 login: [ 34.409586] vcc-gmac-phy: disabling [ 34.413500] dc5ldo: disabling [ 34.417307] dldo4: disabling [ 37.131057] Mass Storage Function, version: 2009/09/11 [ 37.136235] LUN: removable file: (no medium) [ 37.152386] using random self ethernet address [ 37.156878] using random host ethernet address [ 37.225664] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 37.230269] dbg0: MAC 1a:55:89:a2:69:43 [ 46.949481] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 47.240259] usb 3-1: USB disconnect, device number 2 [ 53.149476] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 53.400416] usbcore: registered new interface driver cdc_ether [ 53.427727] usbcore: registered new interface driver option [ 53.433589] usbserial: USB Serial support registered for GSM modem (1-port) [ 53.443451] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 7e:28:42:09:db:dd [ 53.454130] usbcore: registered new interface driver rndis_host [ 53.454279] option 3-1:1.2: GSM modem (1-port) converter detected [ 53.478557] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 53.485944] option 3-1:1.4: GSM modem (1-port) converter detected [ 53.493128] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 53.500447] option 3-1:1.5: GSM modem (1-port) converter detected [ 53.507651] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 53.514925] option 3-1:1.3: GSM modem (1-port) converter detected [ 53.521915] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [EC] Watchdog is timed out, reset power. [EC] No voltage on 3.3V line, try to switch on PMIC throught PWRON U-Boot SPL 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) DRAM: 1024 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 1 ms (318.4 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502464 bytes read in 172 ms (36.1 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57964 bytes read in 11 ms (5 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x633840 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x7ec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000025] Switching to timer-based delay loop, resolution 41ns [ 0.000421] Console: colour dummy device 80x30 [ 0.000501] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000533] pid_max: default: 32768 minimum: 301 [ 0.000796] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000825] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003308] CPU: Testing write buffer coherency: ok [ 0.003971] /cpus/cpu@0 missing clock-frequency property [ 0.004043] /cpus/cpu@1 missing clock-frequency property [ 0.004112] /cpus/cpu@2 missing clock-frequency property [ 0.004187] /cpus/cpu@3 missing clock-frequency property [ 0.004213] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005626] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.005854] rcu: Hierarchical SRCU implementation. [ 0.006840] smp: Bringing up secondary CPUs ... [ 0.019575] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031496] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.043009] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.043255] smp: Brought up 1 node, 4 CPUs [ 0.043302] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.043319] CPU: All CPU(s) started in HYP mode. [ 0.043334] CPU: Virtualization extensions available. [ 0.044476] devtmpfs: initialized [ 0.066739] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.067332] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.067545] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.069606] pinctrl core: initialized pinctrl subsystem [ 0.071547] NET: Registered protocol family 16 [ 0.076239] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.077687] thermal_sys: Registered thermal governor 'step_wise' [ 0.079111] No ATAGs? [ 0.079616] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.079653] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.165291] SCSI subsystem initialized [ 0.166482] usbcore: registered new interface driver usbfs [ 0.166656] usbcore: registered new interface driver hub [ 0.166834] usbcore: registered new device driver usb [ 0.167610] mc: Linux media interface: v0.10 [ 0.167720] videodev: Linux video capture interface: v2.00 [ 0.167844] pps_core: LinuxPPS API ver. 1 registered [ 0.167868] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.167915] PTP clock support registered [ 0.168351] Advanced Linux Sound Architecture Driver Initialized. [ 0.169782] clocksource: Switched to clocksource arch_sys_counter [ 1.278025] NET: Registered protocol family 2 [ 1.279102] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.279161] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.279245] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.279371] TCP: Hash tables configured (established 8192 bind 8192) [ 1.280220] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.280402] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.280994] NET: Registered protocol family 1 [ 1.282470] RPC: Registered named UNIX socket transport module. [ 1.282502] RPC: Registered udp transport module. [ 1.282521] RPC: Registered tcp transport module. [ 1.282539] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.284472] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.287993] Initialise system trusted keyrings [ 1.288366] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.303940] NFS: Registering the id_resolver key type [ 1.304022] Key type id_resolver registered [ 1.304044] Key type id_legacy registered [ 1.470535] Key type asymmetric registered [ 1.470564] Asymmetric key parser 'x509' registered [ 1.471461] bounce: pool size: 64 pages [ 1.471657] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.471707] io scheduler mq-deadline registered [ 1.471747] io scheduler kyber registered [ 1.473781] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.513838] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.538957] brd: module loaded [ 1.556564] loop: module loaded [ 1.566472] libphy: Fixed MDIO Bus: probed [ 1.567978] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.568708] libphy: sun4i_mii_bus: probed [ 1.572707] CAN device driver interface [ 1.576634] PPP generic driver version 2.4.2 [ 1.577027] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.577053] ehci-platform: EHCI generic platform driver [ 1.578437] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.578479] ohci-platform: OHCI generic platform driver [ 1.579688] usbcore: registered new interface driver usb-storage [ 1.580416] usbcore: registered new interface driver usbserial_generic [ 1.580605] usbserial: USB Serial support registered for generic [ 1.584145] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 1.584170] sun6i-rtc 1c20400.rtc: RTC enabled [ 1.584942] i2c /dev entries driver [ 1.596032] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.601208] ledtrig-cpu: registered to indicate activity on CPUs [ 1.602648] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.603397] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.604199] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.604530] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.604845] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.605094] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 1.605356] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 1.605602] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 1.605819] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 1.606060] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 1.609572] usbcore: registered new interface driver usbhid [ 1.609601] usbhid: USB HID core driver [ 1.619294] Initializing XFRM netlink socket [ 1.620802] NET: Registered protocol family 10 [ 1.622217] Segment Routing with IPv6 [ 1.622365] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.623194] NET: Registered protocol family 17 [ 1.623224] can: controller area network core [ 1.623321] NET: Registered protocol family 29 [ 1.623337] can: raw protocol [ 1.623352] can: broadcast manager protocol [ 1.623373] can: netlink gateway - max_hops=1 [ 1.623731] can: SAE J1939 [ 1.624833] Key type dns_resolver registered [ 1.625009] Registering SWP/SWPB emulation handler [ 1.625256] registered taskstats version 1 [ 1.625370] Loading compiled-in X.509 certificates [ 1.658709] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.665712] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.666613] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.673398] printk: console [ttyS0] disabled [ 1.673873] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 2.619471] printk: console [ttyS0] enabled [ 2.625742] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.632588] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.639205] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.646588] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.657368] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.675990] wbec-rtc wbec-rtc.4.auto: DMA mask not set [ 2.682768] wbec-rtc wbec-rtc.4.auto: registered as rtc0 [ 2.688326] wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-08-20T13:14:39 UTC (1755695679) [ 2.701462] wbec spi0.0: WBEC device added [ 2.707077] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.715261] libphy: sun4i_mii_bus: probed [ 2.720592] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.727431] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.734140] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.745273] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.752114] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.758734] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.766292] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.776886] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.785514] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.792644] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.799151] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.806493] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.816862] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.836853] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.856629] vcc-3v3: supplied by regulator-dummy [ 2.862361] vdd-cpu: supplied by regulator-dummy [ 2.867951] vdd-sys: supplied by regulator-dummy [ 2.873625] dcdc4: supplied by regulator-dummy [ 2.879087] vcc-dram: supplied by regulator-dummy [ 2.884022] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.891576] vcc-gmac-phy: supplied by vcc-3v3 [ 2.898473] dc5ldo: supplied by vcc-dram [ 2.903486] tv: Bringing 700000uV into 3300000-3300000uV [ 2.909728] tv: supplied by regulator-dummy [ 2.914793] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.921368] aldo2: supplied by regulator-dummy [ 2.927371] avcc-pll: supplied by regulator-dummy [ 2.933231] eldo1: supplied by regulator-dummy [ 2.938746] eldo2: supplied by regulator-dummy [ 2.943910] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.951566] vcc-pe: supplied by regulator-dummy [ 2.957681] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.964955] vcc-sd-alt: supplied by regulator-dummy [ 2.971006] dldo2: supplied by regulator-dummy [ 2.976609] dldo3: supplied by regulator-dummy [ 2.981415] random: fast init done [ 2.985809] dldo4: supplied by regulator-dummy [ 2.991407] rtc_ldo: supplied by regulator-dummy [ 2.997285] ldo_io0: supplied by regulator-dummy [ 3.003167] ldo_io1: supplied by regulator-dummy [ 3.008808] axp20x-adc axp22x-adc: DMA mask not set [ 3.015690] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 3.026564] axp20x-i2c 0-0034: AXP20X driver loaded [ 3.034202] i2c i2c-1: using pinctrl states for GPIO recovery [ 3.040183] gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 3.049308] i2c i2c-1: using generic GPIOs for recovery [ 3.094696] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 3.102574] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 1500000) is a Allwinner sun4i [ 3.113009] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 3.115960] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 3.121045] libphy: sun4i_mii_bus: probed [ 3.249728] mmc0: new DDR MMC card at address 0001 [ 3.255442] mmcblk0: mmc0:0001 88A398 7.28 GiB [ 3.260441] mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB [ 3.266766] mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB [ 3.273640] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:c5:c7 [ 3.282107] mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0) [ 3.282865] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 3.292321] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 3.295816] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 3.306365] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 3.312520] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 3.319776] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 3.326994] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 3.331979] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 3.338764] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 3.344436] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 3.350810] libphy: stmmac: probed [ 3.612415] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.618028] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.626205] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 3.659778] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.666865] hub 1-0:1.0: USB hub found [ 3.670739] hub 1-0:1.0: 1 port detected [ 3.675892] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.681521] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.689538] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 3.719775] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.726769] hub 2-0:1.0: USB hub found [ 3.730600] hub 2-0:1.0: 1 port detected [ 3.735688] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.741309] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.749288] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.780295] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.787293] hub 3-0:1.0: USB hub found [ 3.791138] hub 3-0:1.0: 1 port detected [ 3.889865] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.896501] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.904480] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 3.984637] hub 4-0:1.0: USB hub found [ 3.988446] hub 4-0:1.0: 1 port detected [ 3.993551] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 4.000211] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 4.008129] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 4.084663] hub 5-0:1.0: USB hub found [ 4.088491] hub 5-0:1.0: 1 port detected [ 4.093593] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.100251] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 4.108207] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 4.114275] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.184674] hub 6-0:1.0: USB hub found [ 4.188481] hub 6-0:1.0: 1 port detected [ 4.201395] of_cfs_init [ 4.203974] of_cfs_init: OK [ 4.207468] ALSA device list: [ 4.210488] No soundcards found. [ 4.222488] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 4.238407] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 4.245772] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.300491] EXT4-fs (mmcblk0p2): recovery complete [ 4.305820] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.314029] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.321670] devtmpfs: mounted [ 4.329421] Freeing unused kernel memory: 1024K [ 4.334326] Run /sbin/init as init process [ 4.537052] systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time. [ 4.612293] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.636616] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.670814] systemd[1]: Set hostname to . [ 5.475261] systemd[1]: Queued start job for default target Graphical Interface. [ 5.484660] random: systemd: uninitialized urandom read (16 bytes read) [ 5.495447] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.530060] random: systemd: uninitialized urandom read (16 bytes read) [ 5.538589] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.580080] random: systemd: uninitialized urandom read (16 bytes read) [ 5.588808] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.631779] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.671605] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.710485] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.750285] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.790306] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.802377] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.840481] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.870029] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.909984] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.941203] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.980399] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 6.031210] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.040571] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.081124] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.111113] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.150745] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.190948] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.205003] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.245988] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.286088] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.326553] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 6.368889] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 6.417244] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.457066] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.480543] fuse: init (API version 7.32) [ 6.493013] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.508850] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.561845] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.577689] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.593217] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.615797] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 6.623686] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 6.634706] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System[0[ 6.646016] systemd[1]: Mounted Kernel Trace File System. m. [ OK ] Mounted Kernel Trace File System. [ 6.722749] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.773418] systemd[1]: modprobe@drm.service: Succeeded. [ 6.780727] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.821841] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.828976] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 6.871499] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 7.119745] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 8.081783] Driver for 1-wire Dallas network protocol. [ 8.321893] usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator [ 8.337700] wbec-adc wbec-adc.1.auto: DMA mask not set [ 8.341029] wbec-watchdog wbec-watchdog.3.auto: DMA mask not set [ 8.341247] wbec-power wbec-power.6.auto: DMA mask not set [ 8.345352] iio-rescale a1-volt: using raw+scale source channel [ 8.356311] wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set [ 8.387677] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0 [ 8.400006] wbec-gpio wbec-gpio.2.auto: DMA mask not set [ 8.410609] iio-rescale a2-volt: using raw+scale source channel [ 8.417654] iio-rescale a3-volt: using raw+scale source channel [ 8.431922] iio-rescale a4-volt: using raw+scale source channel [ 8.440053] iio-rescale vin-volt: using raw+scale source channel [ 8.451827] iio-rescale v33-volt: using raw+scale source channel [ 8.458936] iio-rescale v50-volt: using raw+scale source channel [ 8.477489] iio-rescale vbus-debug-volt: using raw+scale source channel [ 8.485582] iio-rescale vbus-network-volt: using raw+scale source channel [ 8.572764] Bluetooth: Core ver 2.22 [ 8.576536] NET: Registered protocol family 31 [ 8.581106] Bluetooth: HCI device and connection manager initialized [ 8.587503] Bluetooth: HCI socket layer initialized [ 8.592471] Bluetooth: L2CAP socket layer initialized [ 8.597591] Bluetooth: SCO socket layer initialized [ 8.650073] usbcore: registered new interface driver btusb [ 8.657882] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.678921] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 8.688880] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 8.695575] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 8.705850] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 8.712491] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 8.721874] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 8.730052] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.745285] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ OK ] Found device /dev/mmcblk0p6. [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/ttyS0. [ 9.197016] RTL871X: module init start [ 9.200878] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ 9.399338] RTL871X: rtw_ndev_init(wlan0) [ 9.404812] RTL871X: rtw_ndev_init(wlan1) [ 9.410235] usbcore: registered new interface driver rtl8723bu [ 9.416089] RTL871X: module init ret=0 [ 9.510217] usbcore: registered new interface driver rtl8xxxu [ 9.538844] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... [ 9.759927] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. Starting Load/Save RF Kill Switch Status... [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 9.966088] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 10.161581] systemd-journald[140]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config files... [ 10.179361] systemd-journald[140]: File /var/log/journal/39ae044ced0a479e894fa7425a03e1be/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Flush Journal to Persistent Storage. [ 10.559881] random: crng init done [ 10.563328] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... Starting Device Configuration Service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli…t4 Metadata Check Snapshots... [ 12.015861] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.021442] Bluetooth: BNEP filters: protocol multicast [ 12.026769] Bluetooth: BNEP socket layer initialized Starting "Package for self…& migrate IQnergy software"... Starting "Watchdog for wb-rules and wb-mqtt-serial"... Starting LSB: service and resource monitoring daemon... Starting Authorization Manager... Starting Reverse SSH Tunneling... Starting User command preprocessor... Starting User Login Management... Starting User command handler service... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting IQnergy controller configurator... Starting WPA supplicant... Starting Zigbee available emulator... [FAILED] Failed to start Device Configuration Service. See 'systemctl status config-manager.service' for details. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [FAILED] Failed to start "Package f…l & migrate IQnergy software". See 'systemctl status iqnergy-software-installer.service' for details. [ OK ] Started "Watchdog for wb-rules and wb-mqtt-serial". [FAILED] Failed to start Reverse SSH Tunneling. See 'systemctl status reverse-ssh.service' for details. [FAILED] Failed to start User command preprocessor. See 'systemctl status rules-preprocessor.service' for details. [FAILED] Failed to start User command handler service. See 'systemctl status usr-cmd-handler.service' for details. [ OK ] Started IQnergy controller configurator. [ OK ] Started Zigbee available emulator. [ OK ] Started WPA supplicant. [ OK ] Started User Login Management. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started LSB: service and resource monitoring daemon. [ OK ] Started Authorization Manager. [ OK ] Started Bluetooth service. [ OK ] Started Network Manager. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Network Manager Wait Online... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ 14.831500] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 14.851616] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 14.858987] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 14.866900] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 14.884772] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ 19.950355] 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 1500000) is a Allwinner sun4i [ 20.665151] RTL871X: rtw_set_802_11_connect(wlan1) fw_state=0x00000008 [ 20.908480] RTL871X: start auth [ 20.913793] RTL871X: auth success, start assoc [ 20.927912] RTL871X: rtw_cfg80211_indicate_connect(wlan1) BSS not found !! [ 20.934878] RTL871X: assoc success [ 20.954151] RTL871X: port switch - port0(wlan1), port1(wlan0) [ 21.070547] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 1500000) is a Allwinner sun4i [ 21.122787] RTL871X: send eapol packet [ 21.134549] RTL871X: send eapol packet [ 21.139930] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 21.190467] RTL871X: set pairwise key camid:4, addr:10:7b:ef:57:63:ac, kid:0, type:AES [ 21.211287] RTL871X: set group key camid:5, addr:10:7b:ef:57:63:ac, kid:1, type:AES [ OK ] Finished Network Manager Wait Online. [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... [ OK ] Started Live Syncing Daemon. Starting Mosquitto MQTT Broker... Starting Network Time Service... [ OK ] Started MQTT Local Backup of Metering Data. [ OK ] Stopped Reverse SSH Tunneling. Starting Reverse SSH Tunneling... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started Unattended Upgrades Shutdown. [ OK ] Started vnStat network traffic monitor. Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. Starting Health monitor service... [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started KNX Daemon. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [FAILED] Failed to start Reverse SSH Tunneling. See 'systemctl status reverse-ssh.service' for details. [ OK ] Finished Permit User Sessions. [FAILED] Failed to start Health monitor service. See 'systemctl status health-monitor.service' for details. [DEPEND] Dependency failed for Zigbee available emulator. [DEPEND] Dependency failed for Data…on and transformation service. [DEPEND] Dependency failed for User command handler service. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started MQTT Driver for GPIO-controlled switches. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Getty on tty1. Stopping KNX Daemon... Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Stopped KNX Daemon. Starting KNX Daemon... [ OK ] Started KNX Daemon. [ OK ] Finished Compensation of s…ice-tree (with opposite sign). [ OK ] Finished KNXD Configurator for Wiren Board. [ OK ] Reached target Network is Online. Starting LSB: Brings up/down network automatically... [ OK ] Started Mosquitto MQTT Broker. Starting Unattended upgrades MQTT trigger... Starting "IQ network manager"... [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost… generating archive with data. [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. Starting Wiren Board MQTT to IEC 60870-5-104 gateway... [ OK ] Started Wiren Board MQTT KNX bridge. [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board MQTT to Modbus gateway. [ OK ] Started metrics sender. [ OK ] Started Virtual MQTT devic…r Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started Wiren Board firmware update service. [ OK ] Started Unattended upgrades MQTT trigger. [ OK ] Started "IQ network manager". [ OK ] Started Wiren Board MQTT to OPC UA gateway. [ 27.760440] process '/usr/sbin/netplugd' started with executable stack [ OK ] Started A high performance…er and a reverse proxy server. Starting Initialize Wiren Board on successful boot... Starting USB Debug Network... [ OK ] Stopped MQTT Local Backup of Metering Data. [ OK ] Started MQTT Local Backup of Metering Data. Debian GNU/Linux 11 IQ464002 ttyS0 IQ464002 login: [ 34.409944] vcc-gmac-phy: disabling [ 34.413937] dc5ldo: disabling [ 34.418657] dldo4: disabling [ 35.157965] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 35.182452] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 35.190660] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 35.198775] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 35.207001] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 35.215084] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 36.516843] RTL871X: rtw_set_802_11_connect(wlan1) fw_state=0x00000008 [ 36.586305] RTL871X: start auth [ 36.592984] RTL871X: auth success, start assoc [ 36.603121] RTL871X: rtw_cfg80211_indicate_connect(wlan1) BSS not found !! [ 36.610130] RTL871X: assoc success [ 36.711061] RTL871X: send eapol packet [ 36.727745] RTL871X: send eapol packet [ 36.791970] RTL871X: rtw_tkip_decrypt(wlan1) gkey installed. no_gkey_bc_cnt:1, no_gkey_mc_cnt:0 [ 36.860604] RTL871X: set pairwise key camid:4, addr:50:ff:20:5b:e9:3a, kid:0, type:AES [ 36.877494] RTL871X: set group key camid:5, addr:50:ff:20:5b:e9:3a, kid:2, type:TKIP [ 37.175208] Mass Storage Function, version: 2009/09/11 [ 37.180553] LUN: removable file: (no medium) [ 37.212296] using random self ethernet address [ 37.216831] using random host ethernet address [ 37.364732] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 37.369312] dbg0: MAC 1a:55:89:a2:69:43 [ 47.789857] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 48.085570] usb 3-1: USB disconnect, device number 2 [ 53.979913] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 54.246773] usbcore: registered new interface driver cdc_ether [ 54.272685] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 72:4e:ce:06:d1:1c [ 54.277078] usbcore: registered new interface driver option [ 54.283175] usbcore: registered new interface driver rndis_host [ 54.288709] usbserial: USB Serial support registered for GSM modem (1-port) [ 54.302361] option 3-1:1.2: GSM modem (1-port) converter detected [ 54.314262] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 54.321590] option 3-1:1.4: GSM modem (1-port) converter detected [ 54.328465] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 54.336125] option 3-1:1.5: GSM modem (1-port) converter detected [ 54.343227] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 54.350504] option 3-1:1.3: GSM modem (1-port) converter detected [ 54.357416] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [EC] Watchdog is timed out, reset power. [EC] No voltage on 3.3V line, try to switch on PMIC throught PWRON U-Boot SPL 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) DRAM: 1024 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 1 ms (318.4 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502464 bytes read in 173 ms (35.8 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57964 bytes read in 11 ms (5 MiB/s) 254 bytes read in 3 ms (82 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x633840 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x7ec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000023] Switching to timer-based delay loop, resolution 41ns [ 0.000382] Console: colour dummy device 80x30 [ 0.000455] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000484] pid_max: default: 32768 minimum: 301 [ 0.001184] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001315] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003588] CPU: Testing write buffer coherency: ok [ 0.004124] /cpus/cpu@0 missing clock-frequency property [ 0.004182] /cpus/cpu@1 missing clock-frequency property [ 0.004238] /cpus/cpu@2 missing clock-frequency property [ 0.004298] /cpus/cpu@3 missing clock-frequency property [ 0.004320] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005554] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.005764] rcu: Hierarchical SRCU implementation. [ 0.007913] smp: Bringing up secondary CPUs ... [ 0.019610] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031250] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.042639] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.042864] smp: Brought up 1 node, 4 CPUs [ 0.042906] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.042922] CPU: All CPU(s) started in HYP mode. [ 0.042936] CPU: Virtualization extensions available. [ 0.044018] devtmpfs: initialized [ 0.066807] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.067676] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.067750] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.069314] pinctrl core: initialized pinctrl subsystem [ 0.071132] NET: Registered protocol family 16 [ 0.075867] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.077943] thermal_sys: Registered thermal governor 'step_wise' [ 0.079118] No ATAGs? [ 0.079497] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.079525] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.165527] SCSI subsystem initialized [ 0.166178] usbcore: registered new interface driver usbfs [ 0.166312] usbcore: registered new interface driver hub [ 0.166453] usbcore: registered new device driver usb [ 0.167123] mc: Linux media interface: v0.10 [ 0.167222] videodev: Linux video capture interface: v2.00 [ 0.167336] pps_core: LinuxPPS API ver. 1 registered [ 0.167358] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.167402] PTP clock support registered [ 0.167808] Advanced Linux Sound Architecture Driver Initialized. [ 0.169192] clocksource: Switched to clocksource arch_sys_counter [ 1.278153] NET: Registered protocol family 2 [ 1.280452] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.280561] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.280724] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.280958] TCP: Hash tables configured (established 8192 bind 8192) [ 1.281204] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.281301] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.281652] NET: Registered protocol family 1 [ 1.282609] RPC: Registered named UNIX socket transport module. [ 1.282636] RPC: Registered udp transport module. [ 1.282652] RPC: Registered tcp transport module. [ 1.282667] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.285502] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.288094] Initialise system trusted keyrings [ 1.288420] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.303978] NFS: Registering the id_resolver key type [ 1.304076] Key type id_resolver registered [ 1.304095] Key type id_legacy registered [ 1.472978] Key type asymmetric registered [ 1.473012] Asymmetric key parser 'x509' registered [ 1.473223] bounce: pool size: 64 pages [ 1.473312] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.473335] io scheduler mq-deadline registered [ 1.473353] io scheduler kyber registered [ 1.474693] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.516249] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.540078] brd: module loaded [ 1.558354] loop: module loaded [ 1.567486] libphy: Fixed MDIO Bus: probed [ 1.570301] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.571363] libphy: sun4i_mii_bus: probed [ 1.574424] CAN device driver interface [ 1.577968] PPP generic driver version 2.4.2 [ 1.578255] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.578275] ehci-platform: EHCI generic platform driver [ 1.580632] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.580712] ohci-platform: OHCI generic platform driver [ 1.582516] usbcore: registered new interface driver usb-storage [ 1.582695] usbcore: registered new interface driver usbserial_generic [ 1.582747] usbserial: USB Serial support registered for generic [ 1.586318] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 1.586358] sun6i-rtc 1c20400.rtc: RTC enabled [ 1.587475] i2c /dev entries driver [ 1.598541] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.603606] ledtrig-cpu: registered to indicate activity on CPUs [ 1.604471] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.604928] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.605464] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.605706] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.605921] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.606117] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 1.606736] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 1.607493] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 1.607962] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 1.608389] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 1.610962] usbcore: registered new interface driver usbhid [ 1.610984] usbhid: USB HID core driver [ 1.621480] Initializing XFRM netlink socket [ 1.622257] NET: Registered protocol family 10 [ 1.624926] Segment Routing with IPv6 [ 1.625136] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.626190] NET: Registered protocol family 17 [ 1.626229] can: controller area network core [ 1.626350] NET: Registered protocol family 29 [ 1.626368] can: raw protocol [ 1.626386] can: broadcast manager protocol [ 1.626411] can: netlink gateway - max_hops=1 [ 1.626595] can: SAE J1939 [ 1.627134] Key type dns_resolver registered [ 1.627239] Registering SWP/SWPB emulation handler [ 1.627362] registered taskstats version 1 [ 1.627428] Loading compiled-in X.509 certificates [ 1.660574] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.668856] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.670077] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.676317] printk: console [ttyS0] disabled [ 1.676488] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 2.619865] printk: console [ttyS0] enabled [ 2.625522] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.632360] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.639033] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.646455] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.657186] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.675799] wbec-rtc wbec-rtc.4.auto: DMA mask not set [ 2.683393] wbec-rtc wbec-rtc.4.auto: registered as rtc0 [ 2.689160] wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-08-20T13:16:41 UTC (1755695801) [ 2.702767] wbec spi0.0: WBEC device added [ 2.707749] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.717134] libphy: sun4i_mii_bus: probed [ 2.722828] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.729673] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.736293] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.746593] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.753641] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.760384] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.767881] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.778418] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.788102] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.794927] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.801388] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.808727] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.819266] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.838684] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.858226] vcc-3v3: supplied by regulator-dummy [ 2.864767] vdd-cpu: supplied by regulator-dummy [ 2.870844] vdd-sys: supplied by regulator-dummy [ 2.876645] dcdc4: supplied by regulator-dummy [ 2.882303] vcc-dram: supplied by regulator-dummy [ 2.887237] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.894284] vcc-gmac-phy: supplied by vcc-3v3 [ 2.899878] dc5ldo: supplied by vcc-dram [ 2.904464] tv: Bringing 700000uV into 3300000-3300000uV [ 2.910559] tv: supplied by regulator-dummy [ 2.915405] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.921807] aldo2: supplied by regulator-dummy [ 2.927672] avcc-pll: supplied by regulator-dummy [ 2.933406] eldo1: supplied by regulator-dummy [ 2.939982] eldo2: supplied by regulator-dummy [ 2.946024] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.953166] vcc-pe: supplied by regulator-dummy [ 2.958423] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.965499] vcc-sd-alt: supplied by regulator-dummy [ 2.971416] dldo2: supplied by regulator-dummy [ 2.976855] dldo3: supplied by regulator-dummy [ 2.981588] random: fast init done [ 2.985845] dldo4: supplied by regulator-dummy [ 2.991214] rtc_ldo: supplied by regulator-dummy [ 2.996948] ldo_io0: supplied by regulator-dummy [ 3.002755] ldo_io1: supplied by regulator-dummy [ 3.008355] axp20x-adc axp22x-adc: DMA mask not set [ 3.015183] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 3.026004] axp20x-i2c 0-0034: AXP20X driver loaded [ 3.033738] i2c i2c-1: using pinctrl states for GPIO recovery [ 3.039698] gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 3.048693] i2c i2c-1: using generic GPIOs for recovery [ 3.094752] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 3.102579] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 1500000) is a Allwinner sun4i [ 3.112974] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 3.118051] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 3.120978] libphy: sun4i_mii_bus: probed [ 3.252989] mmc0: new DDR MMC card at address 0001 [ 3.258669] mmcblk0: mmc0:0001 88A398 7.28 GiB [ 3.263688] mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB [ 3.270059] mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB [ 3.273134] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:c5:c7 [ 3.276288] mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0) [ 3.285169] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 3.297927] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 3.304470] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 3.305477] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 3.310569] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 3.321701] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 3.328929] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 3.333916] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 3.340714] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 3.346371] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 3.352733] libphy: stmmac: probed [ 3.611880] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.617497] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.625687] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 3.659197] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.666284] hub 1-0:1.0: USB hub found [ 3.670144] hub 1-0:1.0: 1 port detected [ 3.675299] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.680929] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.688916] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 3.719192] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.726225] hub 2-0:1.0: USB hub found [ 3.730058] hub 2-0:1.0: 1 port detected [ 3.735167] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.740785] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.748749] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.779775] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.786765] hub 3-0:1.0: USB hub found [ 3.790595] hub 3-0:1.0: 1 port detected [ 3.889281] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.895927] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.903900] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 3.984062] hub 4-0:1.0: USB hub found [ 3.987870] hub 4-0:1.0: 1 port detected [ 3.992989] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 3.999650] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 4.007565] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 4.084055] hub 5-0:1.0: USB hub found [ 4.087878] hub 5-0:1.0: 1 port detected [ 4.093007] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.099682] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 4.107476] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.114703] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 4.194100] hub 6-0:1.0: USB hub found [ 4.197908] hub 6-0:1.0: 1 port detected [ 4.210928] of_cfs_init [ 4.213513] of_cfs_init: OK [ 4.217025] ALSA device list: [ 4.220048] No soundcards found. [ 4.231127] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 4.248763] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 4.256122] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.310073] EXT4-fs (mmcblk0p2): recovery complete [ 4.315401] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.323623] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.331285] devtmpfs: mounted [ 4.339146] Freeing unused kernel memory: 1024K [ 4.343999] Run /sbin/init as init process [ 4.546636] systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time. [ 4.614488] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.638791] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.680067] systemd[1]: Set hostname to . [ 5.475328] systemd[1]: Queued start job for default target Graphical Interface. [ 5.484766] random: systemd: uninitialized urandom read (16 bytes read) [ 5.495442] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.529457] random: systemd: uninitialized urandom read (16 bytes read) [ 5.538013] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.579484] random: systemd: uninitialized urandom read (16 bytes read) [ 5.588219] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.631261] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.670984] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.709923] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.749697] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.789715] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.801738] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.839861] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.869500] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.909390] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.940541] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.979842] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 6.030591] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.039899] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.080535] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.110533] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.150156] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.190347] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.204472] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.245615] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.285534] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.325947] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 6.368069] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 6.416900] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.456717] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.480446] fuse: init (API version 7.32) [ 6.492354] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.508517] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.561423] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.578719] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.594584] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.620065] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 6.627743] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 6.639255] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System[0[ 6.650462] systemd[1]: Mounted Kernel Trace File System. m. [ OK ] Mounted Kernel Trace File System[0[ 6.662925] systemd[1]: Finished Create list of static device nodes for the current kernel. m. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.688563] systemd[1]: modprobe@drm.service: Succeeded. [ 6.699606] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.751647] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.758910] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 6.812987] systemd[1]: Finished File System Check on Root Device. [ OK ] Finished File System Check on Root Device. [ 6.850195] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 7.059584] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 8.061551] Driver for 1-wire Dallas network protocol. [ 8.327883] usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator [ 8.345476] wbec-adc wbec-adc.1.auto: DMA mask not set [ 8.345481] wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set [ 8.345785] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0 [ 8.362520] iio-rescale vin-volt: using raw+scale source channel [ 8.373099] wbec-gpio wbec-gpio.2.auto: DMA mask not set [ 8.386119] wbec-power wbec-power.6.auto: DMA mask not set [ 8.405488] iio-rescale v33-volt: using raw+scale source channel [ 8.437342] iio-rescale v50-volt: using raw+scale source channel [ 8.444730] wbec-watchdog wbec-watchdog.3.auto: DMA mask not set [ 8.452005] iio-rescale vbus-debug-volt: using raw+scale source channel [ 8.471097] iio-rescale vbus-network-volt: using raw+scale source channel [ 8.525220] iio-rescale a1-volt: using raw+scale source channel [ 8.532434] iio-rescale a2-volt: using raw+scale source channel [ 8.536032] Bluetooth: Core ver 2.22 [ 8.540010] iio-rescale a3-volt: using raw+scale source channel [ 8.542274] NET: Registered protocol family 31 [ 8.549233] iio-rescale a4-volt: using raw+scale source channel [ 8.552477] Bluetooth: HCI device and connection manager initialized [ 8.555496] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.572628] Bluetooth: HCI socket layer initialized [ 8.577544] Bluetooth: L2CAP socket layer initialized [ 8.582767] Bluetooth: SCO socket layer initialized [ 8.595821] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.614913] usbcore: registered new interface driver btusb [ 8.617654] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 8.658274] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 8.669324] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 8.675517] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 8.684330] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 8.690942] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 8.700537] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ OK ] Found device /dev/mmcblk0p6. [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/ttyS0. [ 9.088441] RTL871X: module init start [ 9.092396] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... [ 9.304096] RTL871X: rtw_ndev_init(wlan0) [ 9.310489] RTL871X: rtw_ndev_init(wlan1) [ 9.316120] usbcore: registered new interface driver rtl8723bu [ 9.322155] RTL871X: module init ret=0 [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch S[ 9.430626] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc tatus /dev/rfkill Watch. Starting Load/Save RF Kill Switch Status... [ 9.486159] usbcore: registered new interface driver rtl8xxxu [ 9.517295] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Reached target Swap. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 9.822056] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 10.021250] systemd-journald[140]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config[ 10.042156] systemd-journald[140]: File /var/log/journal/39ae044ced0a479e894fa7425a03e1be/system.journal corrupted or uncleanly shut down, renaming and replacing. files... [ OK ] Finished Flush Journal to Persistent Storage. [ 10.499299] random: crng init done [ 10.502755] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... Starting Device Configuration Service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting "Package for self…& migrate IQnergy software"... [ 11.870093] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.875537] Bluetooth: BNEP filters: protocol multicast [ 11.881019] Bluetooth: BNEP socket layer initialized Starting "Watchdog for wb-rules and wb-mqtt-serial"... Starting LSB: service and resource monitoring daemon... Starting Authorization Manager... Starting Reverse SSH Tunneling... Starting User command preprocessor... Starting User Login Management... Starting User command handler service... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting IQnergy controller configurator... Starting WPA supplicant... Starting Zigbee available emulator... [FAILED] Failed to start Device Configuration Service. See 'systemctl status config-manager.service' for details. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [FAILED] Failed to start "Package f…l & migrate IQnergy software". See 'systemctl status iqnergy-software-installer.service' for details. [ OK ] Started "Watchdog for wb-rules and wb-mqtt-serial". [FAILED] Failed to start Reverse SSH Tunneling. See 'systemctl status reverse-ssh.service' for details. [FAILED] Failed to start User command preprocessor. See 'systemctl status rules-preprocessor.service' for details. [FAILED] Failed to start User command handler service. See 'systemctl status usr-cmd-handler.service' for details. [ OK ] Started IQnergy controller configurator. [FAILED] Failed to start Zigbee available emulator. See 'systemctl status zigbee-available-emulator.service' for details. [ OK ] Started WPA supplicant. [ OK ] Started Bluetooth service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started LSB: service and resource monitoring daemon. [ OK ] Started Authorization Manager. [ OK ] Started User Login Management. [ OK ] Started Network Manager. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Network Manager Wait Online... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ 14.630747] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 14.644050] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 14.651649] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 14.659417] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 14.679017] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ 19.832830] 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 1500000) is a Allwinner sun4i [ 20.304390] RTL871X: rtw_set_802_11_connect(wlan1) fw_state=0x00000008 [ 20.954165] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 1500000) is a Allwinner sun4i [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ 22.148605] RTL871X: start auth [ 22.192680] RTL871X: auth success, start assoc [ 22.200505] RTL871X: rtw_cfg80211_indicate_connect(wlan1) BSS not found !! [ 22.207517] RTL871X: assoc success [ 22.252556] RTL871X: port switch - port0(wlan1), port1(wlan0) [ 22.305334] RTL871X: send eapol packet [ 22.315665] RTL871X: send eapol packet [ 22.321483] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... [ 22.500241] RTL871X: set pairwise key camid:4, addr:50:ff:20:5b:e9:3a, kid:0, type:AES [ 22.531333] RTL871X: set group key camid:5, addr:50:ff:20:5b:e9:3a, kid:2, type:TKIP Starting KNX Daemon... [ OK ] Started Live Syncing Daemon. Starting Mosquitto MQTT Broker... Starting Network Time Service... [ OK ] Started MQTT Local Backup of Metering Data. Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started Unattended Upgrades Shutdown. [ OK ] Started vnStat network traffic monitor. Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. Starting Health monitor service... [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started KNX Daemon. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [FAILED] Failed to start Health monitor service. See 'systemctl status health-monitor.service' for details. [DEPEND] Dependency failed for User command handler service. [DEPEND] Dependency failed for Zigbee available emulator. [DEPEND] Dependency failed for Data…on and transformation service. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Finished Network Manager Wait Online. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Getty on tty1. Stopping KNX Daemon... Starting A high performanc… and a reverse proxy server... [ OK ] Stopped Reverse SSH Tunneling. Starting Reverse SSH Tunneling... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Stopped KNX Daemon. [ OK ] Started MQTT Driver for GPIO-controlled switches. [FAILED] Failed to start Reverse SSH Tunneling. See 'systemctl status reverse-ssh.service' for details. Starting KNX Daemon... [ OK ] Started Mosquitto MQTT Broker. Starting Unattended upgrades MQTT trigger... Starting "IQ network manager"... [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost… generating archive with data. [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. Starting Wiren Board MQTT to IEC 60870-5-104 gateway... [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board MQTT to Modbus gateway. [ OK ] Started metrics sender. [ OK ] Started Virtual MQTT devic…r Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started Wiren Board firmware update service. [ 26.607238] RTL871X: rtw_set_802_11_connect(wlan1) fw_state=0x00000008 [ 26.654299] RTL871X: start auth [ 26.662965] RTL871X: auth success, start assoc [ 26.670834] RTL871X: rtw_cfg80211_indicate_connect(wlan1) BSS not found !! [ 26.677913] RTL871X: assoc success [ 26.776709] RTL871X: send eapol packet [ 26.789161] RTL871X: send eapol packet [ 26.803719] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ OK ] Started KNX Daemon. [ 26.930291] RTL871X: set pairwise key camid:4, addr:50:ff:20:5b:e9:3a, kid:0, type:AES [ 26.990531] RTL871X: set group key camid:5, addr:50:ff:20:5b:e9:3a, kid:2, type:TKIP [ OK ] Finished KNXD Configurator for Wiren Board. [ OK ] Finished Compensation of s…ice-tree (with opposite sign). [ OK ] Started Unattended upgrades MQTT trigger. [ OK ] Started "IQ network manager". [ OK ] Started Wiren Board MQTT to OPC UA gateway. [ OK ] Reached target Network is Online. Starting LSB: Brings up/down network automatically... [ OK ] Started Wiren Board MQTT KNX bridge. [ 28.041637] process '/usr/sbin/netplugd' started with executable stack [ OK ] Stopped MQTT Local Backup of Metering Data. [ OK ] Started MQTT Local Backup of Metering Data. [ OK ] Started A high performance…er and a reverse proxy server. Debian GNU/Linux 11 IQ464002 ttyS0 IQ464002 login: [ 34.409370] vcc-gmac-phy: disabling [ 34.414509] dc5ldo: disabling [ 34.424359] dldo4: disabling [ 38.146724] Mass Storage Function, version: 2009/09/11 [ 38.152075] LUN: removable file: (no medium) [ 38.175580] using random self ethernet address [ 38.180161] using random host ethernet address [ 38.278143] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 38.282781] dbg0: MAC 1a:55:89:a2:69:43 [ 48.669278] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 48.957815] usb 3-1: USB disconnect, device number 2 [ 54.849331] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 55.117973] usbcore: registered new interface driver cdc_ether [ 55.144670] usbcore: registered new interface driver option [ 55.150550] usbserial: USB Serial support registered for GSM modem (1-port) [ 55.179379] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 62:d6:88:6d:11:17 [ 55.189912] usbcore: registered new interface driver rndis_host [ 55.198069] option 3-1:1.2: GSM modem (1-port) converter detected [ 55.228483] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 55.235932] option 3-1:1.4: GSM modem (1-port) converter detected [ 55.266152] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 55.273623] option 3-1:1.5: GSM modem (1-port) converter detected [ 55.297197] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 55.304777] option 3-1:1.3: GSM modem (1-port) converter detected [ 55.326566] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [EC] Watchdog is timed out, reset power. [EC] No voltage on 3.3V line, try to switch on PMIC throught PWRON U-Boot SPL 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) DRAM: 1024 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 2 ms (159.2 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502464 bytes read in 174 ms (35.6 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57964 bytes read in 10 ms (5.5 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x633840 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x7ec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000023] Switching to timer-based delay loop, resolution 41ns [ 0.000391] Console: colour dummy device 80x30 [ 0.000470] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000501] pid_max: default: 32768 minimum: 301 [ 0.000747] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000775] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003507] CPU: Testing write buffer coherency: ok [ 0.004076] /cpus/cpu@0 missing clock-frequency property [ 0.004139] /cpus/cpu@1 missing clock-frequency property [ 0.004199] /cpus/cpu@2 missing clock-frequency property [ 0.004264] /cpus/cpu@3 missing clock-frequency property [ 0.004288] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005579] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.005800] rcu: Hierarchical SRCU implementation. [ 0.007774] smp: Bringing up secondary CPUs ... [ 0.019632] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031362] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.042790] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.043019] smp: Brought up 1 node, 4 CPUs [ 0.043063] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.043079] CPU: All CPU(s) started in HYP mode. [ 0.043093] CPU: Virtualization extensions available. [ 0.044203] devtmpfs: initialized [ 0.066456] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.067729] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.067813] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.069453] pinctrl core: initialized pinctrl subsystem [ 0.071298] NET: Registered protocol family 16 [ 0.076051] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.077722] thermal_sys: Registered thermal governor 'step_wise' [ 0.079193] No ATAGs? [ 0.079602] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.079632] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.166120] SCSI subsystem initialized [ 0.166691] usbcore: registered new interface driver usbfs [ 0.166817] usbcore: registered new interface driver hub [ 0.166948] usbcore: registered new device driver usb [ 0.167581] mc: Linux media interface: v0.10 [ 0.167679] videodev: Linux video capture interface: v2.00 [ 0.167787] pps_core: LinuxPPS API ver. 1 registered [ 0.167808] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.167850] PTP clock support registered [ 0.168248] Advanced Linux Sound Architecture Driver Initialized. [ 0.169634] clocksource: Switched to clocksource arch_sys_counter [ 1.278982] NET: Registered protocol family 2 [ 1.281494] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.281584] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.281713] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.281906] TCP: Hash tables configured (established 8192 bind 8192) [ 1.282121] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.282210] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.282521] NET: Registered protocol family 1 [ 1.283425] RPC: Registered named UNIX socket transport module. [ 1.283449] RPC: Registered udp transport module. [ 1.283463] RPC: Registered tcp transport module. [ 1.283477] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.286725] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.288943] Initialise system trusted keyrings [ 1.289259] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.304936] NFS: Registering the id_resolver key type [ 1.305004] Key type id_resolver registered [ 1.305020] Key type id_legacy registered [ 1.469176] Key type asymmetric registered [ 1.469206] Asymmetric key parser 'x509' registered [ 1.469377] bounce: pool size: 64 pages [ 1.469441] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.469459] io scheduler mq-deadline registered [ 1.469473] io scheduler kyber registered [ 1.472099] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.512553] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.536751] brd: module loaded [ 1.554820] loop: module loaded [ 1.564478] libphy: Fixed MDIO Bus: probed [ 1.566436] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.567276] libphy: sun4i_mii_bus: probed [ 1.571155] CAN device driver interface [ 1.573740] PPP generic driver version 2.4.2 [ 1.574793] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.574848] ehci-platform: EHCI generic platform driver [ 1.576829] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.576876] ohci-platform: OHCI generic platform driver [ 1.578281] usbcore: registered new interface driver usb-storage [ 1.578435] usbcore: registered new interface driver usbserial_generic [ 1.578481] usbserial: USB Serial support registered for generic [ 1.582603] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 1.582633] sun6i-rtc 1c20400.rtc: RTC enabled [ 1.583507] i2c /dev entries driver [ 1.594628] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.599766] ledtrig-cpu: registered to indicate activity on CPUs [ 1.600453] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.600882] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.602284] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.602822] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.603226] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.603525] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 1.603868] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 1.604151] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 1.604410] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 1.604692] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 1.607604] usbcore: registered new interface driver usbhid [ 1.607657] usbhid: USB HID core driver [ 1.617215] Initializing XFRM netlink socket [ 1.619134] NET: Registered protocol family 10 [ 1.621008] Segment Routing with IPv6 [ 1.621171] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.622055] NET: Registered protocol family 17 [ 1.622089] can: controller area network core [ 1.622208] NET: Registered protocol family 29 [ 1.622225] can: raw protocol [ 1.622241] can: broadcast manager protocol [ 1.622263] can: netlink gateway - max_hops=1 [ 1.622421] can: SAE J1939 [ 1.622746] Key type dns_resolver registered [ 1.622842] Registering SWP/SWPB emulation handler [ 1.622971] registered taskstats version 1 [ 1.623493] Loading compiled-in X.509 certificates [ 1.657186] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.664717] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.665679] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.671763] printk: console [ttyS0] disabled [ 1.671937] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 2.617597] printk: console [ttyS0] enabled [ 2.624152] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.631013] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.637633] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.645092] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.655909] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.674643] wbec-rtc wbec-rtc.4.auto: DMA mask not set [ 2.681576] wbec-rtc wbec-rtc.4.auto: registered as rtc0 [ 2.687145] wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-08-20T13:18:44 UTC (1755695924) [ 2.699896] wbec spi0.0: WBEC device added [ 2.705782] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.714053] libphy: sun4i_mii_bus: probed [ 2.719228] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.726068] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.732770] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.742674] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.749686] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.756317] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.763820] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.774354] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.783454] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.790280] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.796724] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.804113] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.814548] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.833956] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.853440] vcc-3v3: supplied by regulator-dummy [ 2.859748] vdd-cpu: supplied by regulator-dummy [ 2.865657] vdd-sys: supplied by regulator-dummy [ 2.871572] dcdc4: supplied by regulator-dummy [ 2.877214] vcc-dram: supplied by regulator-dummy [ 2.882190] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.889205] vcc-gmac-phy: supplied by vcc-3v3 [ 2.894821] dc5ldo: supplied by vcc-dram [ 2.899421] tv: Bringing 700000uV into 3300000-3300000uV [ 2.905489] tv: supplied by regulator-dummy [ 2.910381] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.916773] aldo2: supplied by regulator-dummy [ 2.922662] avcc-pll: supplied by regulator-dummy [ 2.929157] eldo1: supplied by regulator-dummy [ 2.935889] eldo2: supplied by regulator-dummy [ 2.941360] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.948360] vcc-pe: supplied by regulator-dummy [ 2.953669] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.960724] vcc-sd-alt: supplied by regulator-dummy [ 2.967201] dldo2: supplied by regulator-dummy [ 2.973720] dldo3: supplied by regulator-dummy [ 2.978875] random: fast init done [ 2.983624] dldo4: supplied by regulator-dummy [ 2.989895] rtc_ldo: supplied by regulator-dummy [ 2.996141] ldo_io0: supplied by regulator-dummy [ 3.002166] ldo_io1: supplied by regulator-dummy [ 3.007908] axp20x-adc axp22x-adc: DMA mask not set [ 3.014859] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 3.025811] axp20x-i2c 0-0034: AXP20X driver loaded [ 3.033281] i2c i2c-1: using pinctrl states for GPIO recovery [ 3.039201] gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 3.048182] i2c i2c-1: using generic GPIOs for recovery [ 3.090081] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 3.097755] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 1500000) is a Allwinner sun4i [ 3.108311] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 3.112308] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 3.116328] libphy: sun4i_mii_bus: probed [ 3.247035] mmc0: new DDR MMC card at address 0001 [ 3.252745] mmcblk0: mmc0:0001 88A398 7.28 GiB [ 3.257658] mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB [ 3.264053] mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB [ 3.270333] mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0) [ 3.273508] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:c5:c7 [ 3.280400] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 3.286927] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 3.296416] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 3.302857] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 3.308970] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 3.316229] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 3.323470] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 3.328434] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 3.335233] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 3.340902] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 3.347242] libphy: stmmac: probed [ 3.612282] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.617894] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.626069] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 3.659631] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.666723] hub 1-0:1.0: USB hub found [ 3.670587] hub 1-0:1.0: 1 port detected [ 3.675746] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.681374] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.689388] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 3.719630] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.726658] hub 2-0:1.0: USB hub found [ 3.730492] hub 2-0:1.0: 1 port detected [ 3.735587] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.741208] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.749183] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.780158] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.787107] hub 3-0:1.0: USB hub found [ 3.790933] hub 3-0:1.0: 1 port detected [ 3.889719] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.896357] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.904333] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 3.984478] hub 4-0:1.0: USB hub found [ 3.988285] hub 4-0:1.0: 1 port detected [ 3.993371] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 4.000028] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 4.007943] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 4.084512] hub 5-0:1.0: USB hub found [ 4.088334] hub 5-0:1.0: 1 port detected [ 4.093455] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.100126] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 4.107919] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.115163] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 4.194505] hub 6-0:1.0: USB hub found [ 4.198311] hub 6-0:1.0: 1 port detected [ 4.211298] of_cfs_init [ 4.213875] of_cfs_init: OK [ 4.217394] ALSA device list: [ 4.220418] No soundcards found. [ 4.229660] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 4.247305] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 4.254704] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.310427] EXT4-fs (mmcblk0p2): recovery complete [ 4.315760] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.324006] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.331540] devtmpfs: mounted [ 4.339288] Freeing unused kernel memory: 1024K [ 4.344105] Run /sbin/init as init process [ 4.541887] systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time. [ 4.609842] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.634050] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.670475] systemd[1]: Set hostname to . [ 5.482088] systemd[1]: Queued start job for default target Graphical Interface. [ 5.491527] random: systemd: uninitialized urandom read (16 bytes read) [ 5.502433] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.540105] random: systemd: uninitialized urandom read (16 bytes read) [ 5.548658] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.589856] random: systemd: uninitialized urandom read (16 bytes read) [ 5.598586] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.641666] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.681387] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.720267] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.760141] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.800190] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.812267] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.850295] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.879896] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.919841] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.951040] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.990237] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 6.040957] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.050294] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.090968] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.140978] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.180634] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.220822] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.235021] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.276039] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.315940] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.356464] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 6.398579] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 6.447076] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.486881] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.510310] fuse: init (API version 7.32) [ 6.522912] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.538716] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.591562] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.607347] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.622633] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.645573] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 6.653606] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 6.664612] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 6.711150] systemd[1]: Mounted Kernel Trace File System. [ OK ] Mounted Kernel Trace File System. [ 6.752121] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.802998] systemd[1]: modprobe@drm.service: Succeeded. [ 6.810191] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.850602] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 7.130500] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 8.096332] Driver for 1-wire Dallas network protocol. [ 8.326856] usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator [ 8.352212] wbec-adc wbec-adc.1.auto: DMA mask not set [ 8.352217] wbec-power wbec-power.6.auto: DMA mask not set [ 8.367981] iio-rescale a2-volt: using raw+scale source channel [ 8.377270] iio-rescale a3-volt: using raw+scale source channel [ 8.386489] wbec-gpio wbec-gpio.2.auto: DMA mask not set [ 8.387907] iio-rescale a4-volt: using raw+scale source channel [ 8.389210] wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set [ 8.389477] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0 [ 8.421107] wbec-watchdog wbec-watchdog.3.auto: DMA mask not set [ 8.435330] iio-rescale vin-volt: using raw+scale source channel [ 8.447571] iio-rescale v33-volt: using raw+scale source channel [ 8.458275] iio-rescale v50-volt: using raw+scale source channel [ 8.467415] iio-rescale vbus-debug-volt: using raw+scale source channel [ 8.482239] iio-rescale vbus-network-volt: using raw+scale source channel [ 8.492579] iio-rescale a1-volt: using raw+scale source channel [ 8.576308] Bluetooth: Core ver 2.22 [ 8.580150] NET: Registered protocol family 31 [ 8.584619] Bluetooth: HCI device and connection manager initialized [ 8.591071] Bluetooth: HCI socket layer initialized [ 8.595982] Bluetooth: L2CAP socket layer initialized [ 8.601137] Bluetooth: SCO socket layer initialized [ 8.648398] usbcore: registered new interface driver btusb [ 8.685057] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.700785] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 8.710730] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 8.716838] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 8.726241] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 8.733293] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 8.742602] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 8.811755] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.827026] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/mmcblk0p6. [ OK ] Found device /dev/ttyS0. [ 9.325268] RTL871X: module init start [ 9.329051] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ 9.533460] RTL871X: rtw_ndev_init(wlan0) [ 9.538858] RTL871X: rtw_ndev_init(wlan1) [ 9.544386] usbcore: registered new interface driver rtl8723bu [ 9.550291] RTL871X: module init ret=0 [ 9.556698] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. [ 9.640120] usbcore: registered new interface driver rtl8xxxu Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... Starting Load/Save RF Kill Switch Status... [ 9.839928] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Reached target Swap. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 10.035539] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 10.241290] systemd-journald[141]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config[ 10.262602] systemd-journald[141]: File /var/log/journal/39ae044ced0a479e894fa7425a03e1be/system.journal corrupted or uncleanly shut down, renaming and replacing. files... [ OK ] Finished Flush Journal to Persistent Storage. [ 10.579734] random: crng init done [ 10.583184] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... Starting Device Configuration Service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting "Package for self…& migrate IQnergy software"... [ 12.087435] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.093268] Bluetooth: BNEP filters: protocol multicast [ 12.098582] Bluetooth: BNEP socket layer initialized Starting "Watchdog for wb-rules and wb-mqtt-serial"... Starting LSB: service and resource monitoring daemon... Starting Authorization Manager... Starting Reverse SSH Tunneling... Starting User command preprocessor... Starting User Login Management... Starting User command handler service... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting IQnergy controller configurator... Starting WPA supplicant... Starting Zigbee available emulator... [FAILED] Failed to start Device Configuration Service. See 'systemctl status config-manager.service' for details. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [FAILED] Failed to start "Package f…l & migrate IQnergy software". See 'systemctl status iqnergy-software-installer.service' for details. [ OK ] Started "Watchdog for wb-rules and wb-mqtt-serial". [FAILED] Failed to start Reverse SSH Tunneling. See 'systemctl status reverse-ssh.service' for details. [FAILED] Failed to start User command preprocessor. See 'systemctl status rules-preprocessor.service' for details. [FAILED] Failed to start User command handler service. See 'systemctl status usr-cmd-handler.service' for details. [ OK ] Started IQnergy controller configurator. [FAILED] Failed to start Zigbee available emulator. See 'systemctl status zigbee-available-emulator.service' for details. [ OK ] Started Bluetooth service. [ OK ] Started WPA supplicant. [ OK ] Started LSB: service and resource monitoring daemon. [ OK ] Started Authorization Manager. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started User Login Management. [ OK ] Started Network Manager. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Network Manager Wait Online... Starting Hostname Service... [ OK ] Started Hostname Service. Starting Network Manager Script Dispatcher Service... [ OK ] Started Modem Manager. [ OK ] Started Network Manager Script Dispatcher Service. [ 14.831866] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 14.849309] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 14.856852] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 14.864622] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 14.885608] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ 20.001912] 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 1500000) is a Allwinner sun4i [ 20.474870] RTL871X: rtw_set_802_11_connect(wlan1) fw_state=0x00000008 [ 21.120327] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 1500000) is a Allwinner sun4i [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... [ OK ] Started Live Syncing Daemon. Starting Mosquitto MQTT Broker... Starting Network Time Service... [ OK ] Started MQTT Local Backup of Metering Data. Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started Unattended Upgrades Shutdown. [ OK ] Started vnStat network traffic monitor. Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. Starting Health monitor service... [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started KNX Daemon. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ 23.603157] RTL871X: start auth [ 23.639683] RTL871X: auth success, start assoc [ 23.656746] RTL871X: rtw_cfg80211_indicate_connect(wlan1) BSS not found !! [ 23.663859] RTL871X: assoc success [ OK ] Finished Permit User Sessions. [ 23.708378] RTL871X: port switch - port0(wlan1), port1(wlan0) [FAILED] Failed to start Health monitor service. See 'systemctl status health-monitor.service' for details. [DEPEND] Dependency failed for Zigbee available emulator. [DEPEND] Dependency failed for User command handler service. [DEPEND] Dependency failed for Data…on and transformation service. [ 23.860278] RTL871X: send eapol packet [ 23.869916] RTL871X: send eapol packet [ 23.880147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 24.010614] RTL871X: set pairwise key camid:4, addr:10:7b:ef:57:63:ac, kid:0, type:AES [ OK ] Reached target Host and Network Nam[ 24.035305] RTL871X: set group key camid:5, addr:10:7b:ef:57:63:ac, kid:1, type:AES e Lookups. [ OK ] Started Getty on tty1. Starting A high performanc… and a reverse proxy server... [ OK ] Stopped Reverse SSH Tunneling. Starting Reverse SSH Tunneling... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started MQTT Driver for GPIO-controlled switches. [FAILED] Failed to start Reverse SSH Tunneling. See 'systemctl status reverse-ssh.service' for details. [ OK ] Finished Network Manager Wait Online. [ OK ] Stopped KNX Daemon. Starting KNX Daemon... [ OK ] Started Mosquitto MQTT Broker. [ OK ] Finished Compensation of s…ice-tree (with opposite sign). Starting Unattended upgrades MQTT trigger... Starting "IQ network manager"... [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost… generating archive with data. [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. Starting Wiren Board MQTT to IEC 60870-5-104 gateway... [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board MQTT to Modbus gateway. [ OK ] Started metrics sender. [ OK ] Started Virtual MQTT devic…r Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started Wiren Board firmware update service. [ OK ] Started KNX Daemon. [ OK ] Finished KNXD Configurator for Wiren Board. [ 27.259006] RTL871X: rtw_set_802_11_connect(wlan1) fw_state=0x00000008 [ OK ] Started Unattended upgrades MQTT trigger. [ OK ] Started "IQ network manager". [ OK ] Started Wiren Board MQTT to OPC UA gateway. [ OK ] Reached target Network is Online. Starting LSB: Brings up/down network automatically... [ OK ] Started Wiren Board MQTT KNX bridge. [ 28.108923] RTL871X: start auth [ 28.114062] RTL871X: auth success, start assoc [ 28.122687] RTL871X: rtw_cfg80211_indicate_connect(wlan1) BSS not found !! [ 28.129784] RTL871X: assoc success [ 28.222194] process '/usr/sbin/netplugd' started with executable stack [ 28.324225] RTL871X: send eapol packet [ 28.340282] RTL871X: send eapol packet [ 28.345659] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 28.390590] RTL871X: set pairwise key camid:4, addr:10:7b:ef:57:63:ac, kid:0, type:AES [ 28.432525] RTL871X: set group key camid:5, addr:10:7b:ef:57:63:ac, kid:1, type:AES [ OK ] Stopped MQTT Local Backup of Metering Data. [ OK ] Started MQTT Local Backup of Metering Data. Debian GNU/Linux 11 IQ464002 ttyS0 IQ464002 login: [ 34.409871] vcc-gmac-phy: disabling [ 34.414156] dc5ldo: disabling [ 34.421354] dldo4: disabling [ 34.430550] vdd-sd-power: disabling [ 34.434135] vcc-sd: disabling [ 37.708346] Mass Storage Function, version: 2009/09/11 [ 37.713623] LUN: removable file: (no medium) [ 37.737091] using random self ethernet address [ 37.741664] using random host ethernet address [ 37.838238] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 37.843001] dbg0: MAC 1a:55:89:a2:69:43 [ 47.879709] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 48.174321] usb 3-1: USB disconnect, device number 2 [ 51.645024] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 51.666794] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 51.674937] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 51.682922] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 51.691114] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 51.699145] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 51.707286] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 51.715595] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 51.723535] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 52.979240] RTL871X: rtw_set_802_11_connect(wlan1) fw_state=0x00000008 [ 53.086026] RTL871X: start auth [ 53.097090] RTL871X: auth success, start assoc [ 53.104461] RTL871X: rtw_cfg80211_indicate_connect(wlan1) BSS not found !! [ 53.111509] RTL871X: assoc success [ 53.209692] RTL871X: send eapol packet [ 53.220678] RTL871X: send eapol packet [ 53.295386] RTL871X: rtw_tkip_decrypt(wlan1) gkey installed. no_gkey_bc_cnt:0, no_gkey_mc_cnt:2 [ 53.360157] RTL871X: set pairwise key camid:4, addr:50:ff:20:5b:e9:3a, kid:0, type:AES [ 53.371840] RTL871X: set group key camid:5, addr:50:ff:20:5b:e9:3a, kid:2, type:TKIP [ 54.069786] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 54.315823] usbcore: registered new interface driver cdc_ether [ 54.348350] usbcore: registered new interface driver option [ 54.356493] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, fe:ef:12:c6:65:ce [ 54.367388] usbcore: registered new interface driver rndis_host [ 54.374262] usbserial: USB Serial support registered for GSM modem (1-port) [ 54.382237] option 3-1:1.2: GSM modem (1-port) converter detected [ 54.394795] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 54.402198] option 3-1:1.4: GSM modem (1-port) converter detected [ 54.409739] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 54.417004] option 3-1:1.5: GSM modem (1-port) converter detected [ 54.424860] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 54.432194] option 3-1:1.3: GSM modem (1-port) converter detected [ 54.439123] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [EC] Watchdog is timed out, reset power. [EC] No voltage on 3.3V line, try to switch on PMIC throught PWRON U-Boot SPL 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) DRAM: 1024 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 1 ms (318.4 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502464 bytes read in 172 ms (36.1 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57964 bytes read in 11 ms (5 MiB/s) 254 bytes read in 3 ms (82 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x633840 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb175 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Feb 24 16:14:47 UTC 2025 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x7ec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000020] Switching to timer-based delay loop, resolution 41ns [ 0.001394] Console: colour dummy device 80x30 [ 0.001543] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.001610] pid_max: default: 32768 minimum: 301 [ 0.002090] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002140] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003797] CPU: Testing write buffer coherency: ok [ 0.004286] /cpus/cpu@0 missing clock-frequency property [ 0.004337] /cpus/cpu@1 missing clock-frequency property [ 0.004386] /cpus/cpu@2 missing clock-frequency property [ 0.004439] /cpus/cpu@3 missing clock-frequency property [ 0.004458] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006100] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.006773] rcu: Hierarchical SRCU implementation. [ 0.008385] smp: Bringing up secondary CPUs ... [ 0.019814] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031300] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.042582] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.042789] smp: Brought up 1 node, 4 CPUs [ 0.042832] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.042846] CPU: All CPU(s) started in HYP mode. [ 0.042859] CPU: Virtualization extensions available. [ 0.044556] devtmpfs: initialized [ 0.067145] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.067729] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.067789] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.069163] pinctrl core: initialized pinctrl subsystem [ 0.070897] NET: Registered protocol family 16 [ 0.075558] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.078003] thermal_sys: Registered thermal governor 'step_wise' [ 0.078925] No ATAGs? [ 0.079271] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.079297] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.165592] SCSI subsystem initialized [ 0.166095] usbcore: registered new interface driver usbfs [ 0.166206] usbcore: registered new interface driver hub [ 0.166326] usbcore: registered new device driver usb [ 0.166923] mc: Linux media interface: v0.10 [ 0.167016] videodev: Linux video capture interface: v2.00 [ 0.167121] pps_core: LinuxPPS API ver. 1 registered [ 0.167141] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.167180] PTP clock support registered [ 0.167560] Advanced Linux Sound Architecture Driver Initialized. [ 0.168912] clocksource: Switched to clocksource arch_sys_counter [ 1.281236] NET: Registered protocol family 2 [ 1.282338] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.282402] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.282499] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.282640] TCP: Hash tables configured (established 8192 bind 8192) [ 1.282810] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.282889] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.283159] NET: Registered protocol family 1 [ 1.285193] RPC: Registered named UNIX socket transport module. [ 1.285234] RPC: Registered udp transport module. [ 1.285263] RPC: Registered tcp transport module. [ 1.285289] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.287592] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.290713] Initialise system trusted keyrings [ 1.291187] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.305298] NFS: Registering the id_resolver key type [ 1.305664] Key type id_resolver registered [ 1.305767] Key type id_legacy registered [ 1.476528] Key type asymmetric registered [ 1.476574] Asymmetric key parser 'x509' registered [ 1.476860] bounce: pool size: 64 pages [ 1.476976] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.477006] io scheduler mq-deadline registered [ 1.477029] io scheduler kyber registered [ 1.478615] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.519543] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.544060] brd: module loaded [ 1.561425] loop: module loaded [ 1.571466] libphy: Fixed MDIO Bus: probed [ 1.572800] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.574881] libphy: sun4i_mii_bus: probed [ 1.577632] CAN device driver interface [ 1.581855] PPP generic driver version 2.4.2 [ 1.582176] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.582198] ehci-platform: EHCI generic platform driver [ 1.583374] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.583410] ohci-platform: OHCI generic platform driver [ 1.586050] usbcore: registered new interface driver usb-storage [ 1.586239] usbcore: registered new interface driver usbserial_generic [ 1.586309] usbserial: USB Serial support registered for generic [ 1.589025] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 1.589050] sun6i-rtc 1c20400.rtc: RTC enabled [ 1.590989] i2c /dev entries driver [ 1.602111] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.606704] ledtrig-cpu: registered to indicate activity on CPUs [ 1.608070] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.608571] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.609309] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.609578] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.609830] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.610018] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 1.610256] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 1.610480] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 1.610680] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 1.610911] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 1.614730] usbcore: registered new interface driver usbhid [ 1.614754] usbhid: USB HID core driver [ 1.625029] Initializing XFRM netlink socket [ 1.625969] NET: Registered protocol family 10 [ 1.627293] Segment Routing with IPv6 [ 1.627425] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.629685] NET: Registered protocol family 17 [ 1.629740] can: controller area network core [ 1.629948] NET: Registered protocol family 29 [ 1.629974] can: raw protocol [ 1.629997] can: broadcast manager protocol [ 1.630031] can: netlink gateway - max_hops=1 [ 1.630272] can: SAE J1939 [ 1.630788] Key type dns_resolver registered [ 1.630908] Registering SWP/SWPB emulation handler [ 1.631057] registered taskstats version 1 [ 1.631134] Loading compiled-in X.509 certificates [ 1.664506] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.672028] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.673755] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.680037] printk: console [ttyS0] disabled [ 1.680266] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 2.623524] printk: console [ttyS0] enabled [ 2.629818] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.636620] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.643278] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.650650] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.661427] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.680047] wbec-rtc wbec-rtc.4.auto: DMA mask not set [ 2.686724] wbec-rtc wbec-rtc.4.auto: registered as rtc0 [ 2.692342] wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-08-20T13:20:47 UTC (1755696047) [ 2.705407] wbec spi0.0: WBEC device added [ 2.711115] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.719327] libphy: sun4i_mii_bus: probed [ 2.724464] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.731501] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.738155] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.749295] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.756105] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.762750] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.770300] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.780948] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.789540] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.796526] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.803112] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.810457] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.820831] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.840814] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.860561] vcc-3v3: supplied by regulator-dummy [ 2.866227] vdd-cpu: supplied by regulator-dummy [ 2.871971] vdd-sys: supplied by regulator-dummy [ 2.877559] dcdc4: supplied by regulator-dummy [ 2.883064] vcc-dram: supplied by regulator-dummy [ 2.887942] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.895612] vcc-gmac-phy: supplied by vcc-3v3 [ 2.902559] dc5ldo: supplied by vcc-dram [ 2.907440] tv: Bringing 700000uV into 3300000-3300000uV [ 2.913743] tv: supplied by regulator-dummy [ 2.918814] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.925347] aldo2: supplied by regulator-dummy [ 2.931392] avcc-pll: supplied by regulator-dummy [ 2.937240] eldo1: supplied by regulator-dummy [ 2.942771] eldo2: supplied by regulator-dummy [ 2.947890] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.955719] vcc-pe: supplied by regulator-dummy [ 2.961735] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.969048] vcc-sd-alt: supplied by regulator-dummy [ 2.975048] dldo2: supplied by regulator-dummy [ 2.980683] dldo3: supplied by regulator-dummy [ 2.985419] random: fast init done [ 2.989838] dldo4: supplied by regulator-dummy [ 2.995387] rtc_ldo: supplied by regulator-dummy [ 3.001337] ldo_io0: supplied by regulator-dummy [ 3.007147] ldo_io1: supplied by regulator-dummy [ 3.012861] axp20x-adc axp22x-adc: DMA mask not set [ 3.019748] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 3.030662] axp20x-i2c 0-0034: AXP20X driver loaded [ 3.038238] i2c i2c-1: using pinctrl states for GPIO recovery [ 3.044223] gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 3.053521] i2c i2c-1: using generic GPIOs for recovery [ 3.096864] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 3.105557] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 1500000) is a Allwinner sun4i [ 3.116022] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 3.124071] libphy: sun4i_mii_bus: probed [ 3.128951] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 3.261569] mmc0: new DDR MMC card at address 0001 [ 3.267245] mmcblk0: mmc0:0001 88A398 7.28 GiB [ 3.272262] mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB [ 3.272731] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:c5:c7 [ 3.278583] mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB [ 3.287531] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 3.298762] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 3.304929] mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0) [ 3.305151] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 3.314961] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 3.318333] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 3.329499] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 3.336727] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 3.341708] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 3.348493] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 3.354163] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 3.360542] libphy: stmmac: probed [ 3.621555] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.627169] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.635351] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 3.668919] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.676052] hub 1-0:1.0: USB hub found [ 3.679916] hub 1-0:1.0: 1 port detected [ 3.685061] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.690695] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.698687] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 3.728918] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.735925] hub 2-0:1.0: USB hub found [ 3.739755] hub 2-0:1.0: 1 port detected [ 3.744856] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.750472] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.758456] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.789434] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.796444] hub 3-0:1.0: USB hub found [ 3.800275] hub 3-0:1.0: 1 port detected [ 3.899007] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.905644] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.913609] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 3.993783] hub 4-0:1.0: USB hub found [ 3.997589] hub 4-0:1.0: 1 port detected [ 4.002689] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 4.009367] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 4.017279] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 4.093802] hub 5-0:1.0: USB hub found [ 4.097612] hub 5-0:1.0: 1 port detected [ 4.102692] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.109363] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 4.117155] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.124398] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 4.203797] hub 6-0:1.0: USB hub found [ 4.207603] hub 6-0:1.0: 1 port detected [ 4.220670] of_cfs_init [ 4.223248] of_cfs_init: OK [ 4.226755] ALSA device list: [ 4.229777] No soundcards found. [ 4.238961] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 4.254937] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 4.262328] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.324219] EXT4-fs (mmcblk0p2): recovery complete [ 4.329716] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.337904] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.345442] devtmpfs: mounted [ 4.353276] Freeing unused kernel memory: 1024K [ 4.358075] Run /sbin/init as init process [ 4.561081] systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time. [ 4.634257] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.658512] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.689800] systemd[1]: Set hostname to . [ 5.497972] systemd[1]: Queued start job for default target Graphical Interface. [ 5.507412] random: systemd: uninitialized urandom read (16 bytes read) [ 5.518295] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.559221] random: systemd: uninitialized urandom read (16 bytes read) [ 5.567787] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.609147] random: systemd: uninitialized urandom read (16 bytes read) [ 5.617875] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.660997] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.700701] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.739547] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.779431] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.819490] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.831640] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.869641] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.899230] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.939127] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.970318] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 6.009567] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 6.060344] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.069668] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.110251] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.140273] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.179806] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.220118] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.234304] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.275372] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.315307] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.355842] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 6.397889] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 6.446778] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.486136] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.509790] fuse: init (API version 7.32) [ 6.522125] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.538097] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.591077] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.606726] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.621860] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.645000] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 6.652757] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 6.663982] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 6.710380] systemd[1]: Mounted Kernel Trace File System. [ OK ] Mounted Kernel Trace File System. [ 6.751442] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.802310] systemd[1]: modprobe@drm.service: Succeeded. [ 6.809385] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.849907] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 7.119434] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 8.098194] Driver for 1-wire Dallas network protocol. [ 8.351367] wbec-power wbec-power.6.auto: DMA mask not set [ 8.351395] usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator [ 8.364597] wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set [ 8.371813] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0 [ 8.373971] wbec-adc wbec-adc.1.auto: DMA mask not set [ 8.395250] wbec-gpio wbec-gpio.2.auto: DMA mask not set [ 8.408276] iio-rescale vin-volt: using raw+scale source channel [ 8.416341] iio-rescale v33-volt: using raw+scale source channel [ 8.441624] iio-rescale v50-volt: using raw+scale source channel [ 8.463179] wbec-watchdog wbec-watchdog.3.auto: DMA mask not set [ 8.466252] iio-rescale vbus-debug-volt: using raw+scale source channel [ 8.560062] iio-rescale vbus-network-volt: using raw+scale source channel [ 8.569021] Bluetooth: Core ver 2.22 [ 8.572765] NET: Registered protocol family 31 [ 8.577232] Bluetooth: HCI device and connection manager initialized [ 8.583828] Bluetooth: HCI socket layer initialized [ 8.588780] Bluetooth: L2CAP socket layer initialized [ 8.593983] Bluetooth: SCO socket layer initialized [ 8.604670] iio-rescale a1-volt: using raw+scale source channel [ 8.607091] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.633026] iio-rescale a2-volt: using raw+scale source channel [ 8.651392] usbcore: registered new interface driver btusb [ 8.657853] iio-rescale a3-volt: using raw+scale source channel [ 8.670068] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 8.680094] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 8.686145] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 8.699452] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 8.705951] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 8.715344] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 8.729412] iio-rescale a4-volt: using raw+scale source channel [ 8.766535] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.779736] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/mmcblk0p6. [ OK ] Found device /dev/ttyS0. [ 9.210341] RTL871X: module init start [ 9.214143] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ 9.431748] RTL871X: rtw_ndev_init(wlan0) [ 9.437081] RTL871X: rtw_ndev_init(wlan1) [ 9.442597] usbcore: registered new interface driver rtl8723bu [ 9.448480] RTL871X: module init ret=0 [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... [ 9.530221] usbcore: registered new interface driver rtl8xxxu [ 9.542048] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 Starting File System Check on /dev/mmcblk0p6... Starting Load/Save RF Kill Switch Status... [ OK ] Started Load/Save RF Kill Switch Status. [ 9.679093] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 9.876786] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 10.092323] systemd-journald[140]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config files... [ 10.111202] systemd-journald[140]: File /var/log/journal/39ae044ced0a479e894fa7425a03e1be/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Flush Journal to Persistent Storage. [ 10.609023] random: crng init done [ 10.612462] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... Starting Device Configuration Service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting "Package for self…& migrate IQnergy software"... Starting "Watchdog for wb-rules and wb-mqtt-serial"... Starting LSB: service and resource monitoring [ 11.991746] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 daemon... [ 11.997878] Bluetooth: BNEP filters: protocol multicast [ 12.004806] Bluetooth: BNEP socket layer initialized Starting Authorization Manager... Starting Reverse SSH Tunneling... Starting User command preprocessor... Starting User Login Management... Starting User command handler service... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting IQnergy controller configurator... Starting WPA supplicant... Starting Zigbee available emulator... [FAILED] Failed to start Device Configuration Service. See 'systemctl status config-manager.service' for details. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [FAILED] Failed to start "Package f…l & migrate IQnergy software". See 'systemctl status iqnergy-software-installer.service' for details. [ OK ] Started "Watchdog for wb-rules and wb-mqtt-serial". [FAILED] Failed to start Reverse SSH Tunneling. See 'systemctl status reverse-ssh.service' for details. [FAILED] Failed to start User command preprocessor. See 'systemctl status rules-preprocessor.service' for details. [FAILED] Failed to start User command handler service. See 'systemctl status usr-cmd-handler.service' for details. [ OK ] Started IQnergy controller configurator. [FAILED] Failed to start Zigbee available emulator. See 'systemctl status zigbee-available-emulator.service' for details. [ OK ] Started Authorization Manager. [ OK ] Started WPA supplicant. [ OK ] Started LSB: service and resource monitoring daemon. [ OK ] Started Bluetooth service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started User Login Management. [ OK ] Started Network Manager. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Network Manager Wait Online... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ 14.780703] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 14.795511] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 14.803016] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 14.810920] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 14.823385] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ 19.843760] 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 1500000) is a Allwinner sun4i [ 20.734045] RTL871X: rtw_set_802_11_connect(wlan1) fw_state=0x00000008 [ 21.040186] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 132, base_baud = 1500000) is a Allwinner sun4i [ 21.127401] RTL871X: start auth [ 21.132413] RTL871X: auth success, start assoc [ 21.151926] RTL871X: rtw_cfg80211_indicate_connect(wlan1) BSS not found !! [ 21.158963] RTL871X: assoc success [ 21.180909] RTL871X: port switch - port0(wlan1), port1(wlan0) [ 21.356001] RTL871X: send eapol packet [ 21.367564] RTL871X: send eapol packet [ 21.372828] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 21.419746] RTL871X: set pairwise key camid:4, addr:10:7b:ef:57:63:ac, kid:0, type:AES [ 21.431037] RTL871X: set group key camid:5, addr:10:7b:ef:57:63:ac, kid:1, type:AES [ OK ] Finished Network Manager Wait Online. [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... [ OK ] Started Live Syncing Daemon. Starting Mosquitto MQTT Broker... Starting Network Time Service... [ OK ] Started MQTT Local Backup of Metering Data. Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started Unattended Upgrades Shutdown. [ OK ] Started vnStat network traffic monitor. Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. Starting Health monitor service... [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started KNX Daemon. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [FAILED] Failed to start Health monitor service. See 'systemctl status health-monitor.service' for details. [DEPEND] Dependency failed for Zigbee available emulator. [DEPEND] Dependency failed for User command handler service. [DEPEND] Dependency failed for Data…on and transformation service. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started MQTT Driver for GPIO-controlled switches. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Getty on tty1. Stopping KNX Daemon... Starting A high performanc… and a reverse proxy server... [ OK ] Stopped Reverse SSH Tunneling. Starting Reverse SSH Tunneling... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Stopped KNX Daemon. [FAILED] Failed to start Reverse SSH Tunneling. See 'systemctl status reverse-ssh.service' for details. Starting KNX Daemon... [ OK ] Started Mosquitto MQTT Broker. Starting Unattended upgrades MQTT trigger... Starting "IQ network manager"... [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost… generating archive with data. [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. Starting Wiren Board MQTT to IEC 60870-5-104 gateway... [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board MQTT to Modbus gateway. [ OK ] Started metrics sender. [ OK ] Started Virtual MQTT devic…r Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started Wiren Board firmware update service. [ OK ] Started KNX Daemon. [ OK ] Finished KNXD Configurator for Wiren Board. [ OK ] Finished Compensation of s…ice-tree (with opposite sign). [ OK ] Started Unattended upgrades MQTT trigger. [ OK ] Started "IQ network manager". [ OK ] Started Wiren Board MQTT to OPC UA gateway. [ OK ] Reached target Network is Online. Starting LSB: Brings up/down network automatically... [ OK ] Started Wiren Board MQTT KNX bridge. [ 27.640420] process '/usr/sbin/netplugd' started with executable stack [ OK ] Started A high performance…er and a reverse proxy server. Starting Initialize Wiren Board on successful boot... Starting USB Debug Network... [ OK ] Stopped MQTT Local Backup of Metering Data. [ OK ] Started MQTT Local Backup of Metering Data. Debian GNU/Linux 11 IQ464002 ttyS0 IQ464002 login: [ 34.409126] vcc-gmac-phy: disabling [ 34.413132] dc5ldo: disabling [ 34.416549] dldo4: disabling [ 34.420513] vdd-sd-power: disabling [ 34.424112] vcc-sd: disabling [ 37.027185] Mass Storage Function, version: 2009/09/11 [ 37.032506] LUN: removable file: (no medium) [ 37.059393] using random self ethernet address [ 37.063958] using random host ethernet address [ 37.154497] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 37.159192] dbg0: MAC 1a:55:89:a2:69:43 [ 47.169014] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 47.447534] usb 3-1: USB disconnect, device number 2 [ 53.339115] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 53.599939] usbcore: registered new interface driver cdc_ether [ 53.614158] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, fa:9a:35:c9:f7:5d [ 53.624825] usbcore: registered new interface driver rndis_host [ 53.635848] usbcore: registered new interface driver option [ 53.641727] usbserial: USB Serial support registered for GSM modem (1-port) [ 53.649581] option 3-1:1.2: GSM modem (1-port) converter detected [ 53.657202] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 53.664545] option 3-1:1.4: GSM modem (1-port) converter detected [ 53.676071] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 53.683383] option 3-1:1.5: GSM modem (1-port) converter detected [ 53.690356] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 53.697527] option 3-1:1.3: GSM modem (1-port) converter detected [ 53.704383] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 59.881680] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 59.900789] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 59.909027] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 59.917007] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 59.925251] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 59.933733] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 59.942287] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 59.950494] RTL871X: sta recv deauth reason code(2) sta:10:7b:ef:57:63:ac, ignore = 0 [ 61.208796] RTL871X: rtw_set_802_11_connect(wlan1) fw_state=0x00000008 [ 61.281715] RTL871X: start auth [ 61.291774] RTL871X: auth success, start assoc [ 61.304377] RTL871X: rtw_cfg80211_indicate_connect(wlan1) BSS not found !! [ 61.311552] RTL871X: assoc success [ 61.410195] RTL871X: send eapol packet [ 61.419587] RTL871X: send eapol packet [ 61.549458] RTL871X: set pairwise key camid:4, addr:50:ff:20:5b:e9:3a, kid:0, type:AES [ 61.560891] RTL871X: set group key camid:5, addr:50:ff:20:5b:e9:3a, kid:2, type:TKIP IQ464002 login: