U-Boot 2017.03-1.1.0-gaa233c0fa3 (Jun 09 2020 - 19:28:23 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 31C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 0 Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found No storage devices, perhaps not 'usb start'ed..? No USB update detected, continuing boot switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 324 bytes read in 59 ms (4.9 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 5127648 bytes read in 343 ms (14.3 MiB/s) MMC read: dev # 0, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt imx6ul-wirenboard670 46090 bytes read in 405 ms (110.4 KiB/s) 485 bytes read in 143 ms (2.9 KiB/s) Applying DT overlay wb6-nogsm 597 bytes read in 137 ms (3.9 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu 509 bytes read in 165 ms (2.9 KiB/s) Applying DT overlay wb6-noradio 334 bytes read in 104 ms (2.9 KiB/s) Applying DT overlay wb6-eth1 254 bytes read in 116 ms (2 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x82000000 [ 0x000000 - 0x4e3de0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 9ef32000, end 9ef54fff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.22-wb6 (root@wbdevenv) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #2 SMP Tue Mar 9 09:47:37 UTC 2021 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Wiren Board rev. 6.7.0 (i.MX6UL/ULL) [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] percpu: Embedded 14 pages/cpu @cefc7000 s25996 r8192 d23156 u57344 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait ro [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 491716K/524288K available (6144K kernel code, 312K rwdata, 2280K rodata, 1024K init, 342K bss, 16188K reserved, 16384K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xb0000000 - 0xd0000000 ( 512 MB) [ 0.000000] modules : 0xaf000000 - 0xb0000000 ( 16 MB) [ 0.000000] .text : 0xb0008000 - 0xb0700000 (7136 kB) [ 0.000000] .init : 0xb0a00000 - 0xb0b00000 (1024 kB) [ 0.000000] .data : 0xb0b00000 - 0xb0b4e140 ( 313 kB) [ 0.000000] .bss : 0xb0b50000 - 0xb0ba5aec ( 343 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000055] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002594] Console: colour dummy device 80x30 [ 0.002635] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002666] pid_max: default: 32768 minimum: 301 [ 0.002934] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002960] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.004461] CPU: Testing write buffer coherency: ok [ 0.005029] /cpus/cpu@0 missing clock-frequency property [ 0.005068] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005129] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.007760] Brought up 1 CPUs [ 0.007793] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.007808] CPU: All CPU(s) started in SVC mode. [ 0.009244] devtmpfs: initialized [ 0.036620] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.037394] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.037442] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.038837] pinctrl core: initialized pinctrl subsystem [ 0.041409] NET: Registered protocol family 16 [ 0.043310] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.046121] cpuidle: using governor menu [ 0.081188] No ATAGs? [ 0.081245] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.081269] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.083553] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.129713] mxs-dma 1804000.dma-apbh: initialized [ 0.134530] SCSI subsystem initialized [ 0.135140] usbcore: registered new interface driver usbfs [ 0.135321] usbcore: registered new interface driver hub [ 0.135586] usbcore: registered new device driver usb [ 0.137287] i2c-gpio i2c_rtc: using pins 48 (SDA) and 49 (SCL) [ 0.138217] i2c-gpio i2c_eeprom1: using pins 76 (SDA) and 67 (SCL) [ 0.139107] i2c-gpio i2c_eeprom2: using pins 70 (SDA) and 71 (SCL) [ 0.140628] i2c i2c-1: IMX I2C adapter registered [ 0.140672] i2c i2c-1: can't use DMA, using PIO instead. [ 0.141011] Linux video capture interface: v2.00 [ 0.141170] pps_core: LinuxPPS API ver. 1 registered [ 0.141187] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.141241] PTP clock support registered [ 0.142109] Advanced Linux Sound Architecture Driver Initialized. [ 0.144653] clocksource: Switched to clocksource mxc_timer1 [ 0.170301] NET: Registered protocol family 2 [ 0.171556] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.171682] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.171839] TCP: Hash tables configured (established 4096 bind 4096) [ 0.171957] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.172015] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.172321] NET: Registered protocol family 1 [ 0.173246] RPC: Registered named UNIX socket transport module. [ 0.173279] RPC: Registered udp transport module. [ 0.173295] RPC: Registered tcp transport module. [ 0.173310] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.178244] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.197943] NFS: Registering the id_resolver key type [ 0.198031] Key type id_resolver registered [ 0.198047] Key type id_legacy registered [ 0.208975] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.209010] io scheduler noop registered (default) [ 0.209029] io scheduler deadline registered [ 0.209114] io scheduler cfq registered [ 0.215915] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.215958] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.225471] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 19, base_baud = 5000000) is a IMX [ 0.804354] console [ttymxc0] enabled [ 0.809994] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 56, base_baud = 5000000) is a IMX [ 0.853361] imx_rngc 2284000.rngb: Freescale RNGC registered. [ 0.859495] [drm] Initialized [ 0.899454] brd: module loaded [ 0.919286] loop: module loaded [ 0.927543] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 0.938979] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 0.950617] spi_imx 2010000.ecspi: probed [ 0.956313] libphy: Fixed MDIO Bus: probed [ 0.962908] 20b4000.ethernet supply phy not found, using dummy regulator [ 0.970990] pps pps0: new PPS source ptp0 [ 1.004559] libphy: fec_enet_mii_bus: probed [ 1.010913] fec 20b4000.ethernet eth0: registered PHC device 0 [ 1.134756] 2188000.ethernet supply phy not found, using dummy regulator [ 1.255815] pps pps1: new PPS source ptp1 [ 1.261089] libphy: fec_enet_mii_bus: probed [ 1.269212] fec 2188000.ethernet eth1: registered PHC device 1 [ 1.275755] PPP generic driver version 2.4.2 [ 1.280579] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.287269] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.293148] usbcore: registered new interface driver usb-storage [ 1.299782] usbcore: registered new interface driver usbserial [ 1.305931] usbcore: registered new interface driver usbserial_generic [ 1.312593] usbserial: USB Serial support registered for generic [ 1.319342] mousedev: PS/2 mouse device common for all mice [ 1.370703] rtc rtc0: invalid alarm value: 2021-10-20 33:0:0 [ 1.377038] rtc-pcf8563 4-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 1.393265] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 [ 1.402380] i2c /dev entries driver [ 1.415932] lm75 4-0048: hwmon0: sensor 'lm75b' [ 1.536801] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.545108] sdhci: Secure Digital Host Controller Interface driver [ 1.551332] sdhci: Copyright(c) Pierre Ossman [ 1.555784] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.624739] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.641629] ledtrig-cpu: registered to indicate activity on CPUs [ 1.668397] usbcore: registered new interface driver usbhid [ 1.676158] usbhid: USB HID core driver [ 1.702258] NET: Registered protocol family 10 [ 1.709567] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.717485] NET: Registered protocol family 17 [ 1.722162] Key type dns_resolver registered [ 1.731558] Registering SWP/SWPB emulation handler [ 1.738567] registered taskstats version 1 [ 1.760898] random: fast init done [ 1.769181] mmc0: new DDR MMC card at address 0001 [ 1.776293] imx_thermal 2000000.aips-bus:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 1.787284] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 1.792277] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 1.811225] rtc-pcf8563 4-0051: setting system clock to 2021-09-21 19:28:49 UTC (1632252529) [ 1.819722] of_cfs_init [ 1.822553] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 1.829058] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB [ 1.838173] of_cfs_init: OK [ 1.846624] vdd3p0: disabling [ 1.849737] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 1.854313] vref-3v3: disabling [ 1.859925] usb1_vbus: disabling [ 1.863189] ALSA device list: [ 1.866269] No soundcards found. [ 1.872486] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 1.881483] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 1.891316] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem [ 1.898758] EXT4-fs (mmcblk0p3): write access will be enabled during recovery [ 3.016768] EXT4-fs (mmcblk0p3): recovery complete [ 3.024804] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 3.033085] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 3.041619] devtmpfs: mounted [ 3.050288] Freeing unused kernel memory: 1024K (b0a00000 - b0b00000) [ 3.353537] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.392048] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 3.411308] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 3.455841] systemd[1]: Set hostname to . [ 3.789487] systemd-sysv-generator[133]: [/etc/init.d/wb-mqtt-knx:6] Could not build name for facility $remote_fs,: Invalid argument [ 4.150584] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.185428] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.216496] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.255604] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.295405] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.326491] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 4.371125] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... Mounting /sys/kernel/config... [ OK ] Created slice system-getty.slice. [ OK ] Reached target Slices. Starting Load Kernel Modules... [ OK ] Created slice system-systemd\x2dfsck.slice. Starting Create list of required st…ce nodes for the current kernel... [ OK ] Listening on fsck to fsckd communication Socket. Starting File System Check on Root Device... [ OK ] Listening on Syslog Socket. Mounting Debug File System... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Encrypted Volumes. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Reached target Remote File Systems. Starting Journal Service... [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted /sys/kernel/config. [ OK ] Started Load Kernel Modules. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started File System Check on Root Device. [ OK ] Started Journal Service. [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Create Static Device Nodes in /dev... [ 5.281533] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro Starting Apply Kernel Variables... [ OK ] Started Remount Root and Kernel File Systems. Starting Load/Save Random Seed... Starting prepare partitions at first boot... Starting udev Coldplug all Devices... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ OK ] Started Load/Save Random Seed. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. [ OK ] Started prepare partitions at first boot. [ OK ] Reached target Local File Systems (Pre). [ OK ] Started udev Coldplug all Devices. [ 7.360401] Driver for 1-wire Dallas network protocol. [ 7.376471] lirc_dev: IR Remote Control driver registered, major 245 [ 7.419858] lirc_pwm: module is from the staging directory, the quality is unknown, you have been warned. [ 7.530290] imx6ul-pinctrl 20e0000.iomuxc: pin MX6UL_PAD_LCD_DATA08 already requested by 20e0000.iomuxc; cannot claim for lirc-rfm69 [ 7.542387] imx6ul-pinctrl 20e0000.iomuxc: pin-78 (lirc-rfm69) status -22 [ 7.549242] imx6ul-pinctrl 20e0000.iomuxc: could not request pin 78 (MX6UL_PAD_LCD_DATA08) from group rfm69diogrp on device 20e0000.iomuxc [ 7.561803] lirc_pwm lirc-rfm69: Error applying setting, reverse things back [ OK ] Found device /dev/ttymxc0. [ 7.774185] fec 20b4000.ethernet rename2: renamed from eth0 [ 7.853379] lirc_pwm: probe of lirc-rfm69 failed with error -22 [ 8.274928] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 8.279886] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 8.292822] fec 2188000.ethernet eth0: renamed from eth1 [ 8.370246] fec 20b4000.ethernet eth1: renamed from rename2 [ 8.444821] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 8.468537] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.475477] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.482711] usb usb1: Product: EHCI Host Controller [ 8.487643] usb usb1: Manufacturer: Linux 4.9.22-wb6 ehci_hcd [ 8.493398] usb usb1: SerialNumber: ci_hdrc.0 [ 8.805937] hub 1-0:1.0: USB hub found [ 8.836900] hub 1-0:1.0: 1 port detected [ 8.910332] 2184200.usb supply vbus not found, using dummy regulator [ 9.017559] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 9.022517] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 9.144879] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 9.195126] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.201943] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.209304] usb usb2: Product: EHCI Host Controller [ 9.214192] usb usb2: Manufacturer: Linux 4.9.22-wb6 ehci_hcd [ 9.219987] usb usb2: SerialNumber: ci_hdrc.1 [ OK ] Found device /dev/mmcblk0p6. [ 9.472967] hub 2-0:1.0: USB hub found [ OK ] Found device /dev/mmcblk0p5. [ 9.520157] hub 2-0:1.0: 1 port detected Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... [ 9.914833] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 9.945130] Adding 262140k swap on /dev/mmcblk0p5. Priority:-1 extents:1 across:262140k SS [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ 10.115500] usb 2-1: New USB device found, idVendor=0424, idProduct=2514 [ 10.122256] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 10.149998] hub 2-1:1.0: USB hub found [ 10.159766] hub 2-1:1.0: 4 ports detected [ OK ] Started File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 10.382583] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /mnt/data. Mounting /var/log... [ 10.494908] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting prepare mounts and symlinks to config files... Starting Flush Journal to Persistent Storage... [ 10.656916] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720 [ 10.663859] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.671381] usb 2-1.1: Product: 802.11n WLAN Adapter [ 10.676411] usb 2-1.1: Manufacturer: Realtek [ 10.680696] usb 2-1.1: SerialNumber: 00e04c000001 [ 10.775450] systemd-journald[152]: Received request to flush runtime journal from PID 1 [ 10.838888] systemd-journald[152]: File /var/log/journal/1e4e593c25897ec9fafaf4305fbb10f6/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 10.955523] Bluetooth: Core ver 2.22 [ 10.973177] NET: Registered protocol family 31 [ 10.977778] Bluetooth: HCI device and connection manager initialized [ 11.013407] Bluetooth: HCI socket layer initialized [ 11.029442] Bluetooth: L2CAP socket layer initialized [ 11.050873] Bluetooth: SCO socket layer initialized Starting Load/Save RF Kill Switch Status... [ 11.144497] usbcore: registered new interface driver btusb [ 11.156292] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 11.165079] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin [ 11.215673] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 11.224957] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin [ 11.231498] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin [ 11.247269] Bluetooth: hci0: rom_version status=0 version=1 [ 11.252980] Bluetooth: cfg_sz 0, total size 22496 [ OK ] Started Load/Save RF Kill Switch Status. [ 11.817358] 8723bu: module is from the staging directory, the quality is unknown, you have been warned. [ 11.874935] RTL871X: module init start [ 11.878765] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 [ 11.885828] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ OK ] Started Flush Journal to Persistent Storage. [ 12.200972] RTL871X: rtw_ndev_init(wlan0) [ 12.221095] RTL871X: rtw_ndev_init(wlan1) [ 12.242752] usbcore: registered new interface driver rtl8723bu [ 12.248753] RTL871X: module init ret=0 [ 12.317280] usbcore: registered new interface driver rtl8xxxu [ OK ] Started prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Reached target System Time Synchronized. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Monitor directories with device templates for wb-mqtt-serial. [ OK ] Reached target Paths. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Started Daily apt download activities. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... Starting Wiren Board MQTT to OPC UA gateway... Starting System Logging Service... [ OK ] Started Cgroup management daemon. [ OK ] Started Generates wb-mqtt-serial UI schema for wb-mqtt-confed. [ OK ] Started Regular background program processing daemon. [ OK ] Started watch config files. [ 13.749173] cgroup: new mount options do not match the existing superblock, will be ignored Starting LSB: Hardware configuration with Device Tree overlays... Starting Wiren Board MQTT to Modbus TCP gateway... [ OK ] Started D-Bus System Message Bus. Starting Bluetooth service... Starting Login Service... Starting Avahi mDNS/DNS-SD Stack... Starting LSB: MQTT Driver for serial devices... Starting LSB: Starts syslogd... Starting initialize filesystems at first boot... [ OK ] Started Daily Cleanup of Temporary Directories. Starting Mosquitto MQTT v3.1/v3.1.1 Broker... [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. [ OK ] Started System Logging Service. [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ 15.014839] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.020183] Bluetooth: BNEP filters: protocol multicast [FAILED] Failed to start Wiren Board MQTT to OPC UA gateway. See 'systemctl status wb-mqtt-opcua.service' for details. [ OK ] Started LSB: Starts syslogd. [ 15.112285] Bluetooth: BNEP socket layer initialized [ OK ] Started LSB: MQTT Driver for serial devices. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Bluetooth service. [ OK ] Started initialize filesystems at first boot. [ OK ] Started Login Service. [ OK ] Stopped Wiren Board MQTT to OPC UA gateway. Starting Wiren Board MQTT to OPC UA gateway... Starting Hostname Service... [ OK ] Reached target Bluetooth. Starting LSB: Starts klogd... [ OK ] Started LSB: Starts klogd. [FAILED] Failed to start Wiren Board MQTT to OPC UA gateway. See 'systemctl status wb-mqtt-opcua.service' for details. [ OK ] Started Hostname Service. [FAILED] Failed to start Wiren Board MQTT to Modbus TCP gateway. See 'systemctl status wb-mqtt-mbgate.service' for details. [ OK ] Stopped Wiren Board MQTT to OPC UA gateway. Starting Wiren Board MQTT to OPC UA gateway... [FAILED] Failed to start Wiren Board MQTT to OPC UA gateway. See 'systemctl status wb-mqtt-opcua.service' for details. [ OK ] Stopped Wiren Board MQTT to Modbus TCP gateway. Starting Wiren Board MQTT to Modbus TCP gateway... [ OK ] Stopped Wiren Board MQTT to OPC UA gateway. Starting Wiren Board MQTT to OPC UA gateway... [ 20.065594] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 218, base_baud = 5000000) is a IMX [FAILED] Failed to start Wiren Board MQTT to OPC UA gateway. See 'systemctl status wb-mqtt-opcua.service' for details. [ OK ] Stopped Wiren Board MQTT to OPC UA gateway. Starting Wiren Board MQTT to OPC UA gateway... [FAILED] Failed to start Wiren Board MQTT to Modbus TCP gateway. See 'systemctl status wb-mqtt-mbgate.service' for details. [ OK ] Started LSB: Hardware configuration with Device Tree overlays. Starting LSB: initscript to use GSM modem integrated RTC... [FAILED] Failed to start Wiren Board MQTT to OPC UA gateway. See 'systemctl status wb-mqtt-opcua.service' for details. [ OK ] Started LSB: initscript to use GSM modem integrated RTC. Starting Raise network interfaces... [ OK ] Started Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A lightweight DHCP and caching DNS server... Starting MQTT Driver for ADC... [ OK ] Started MQTT Driver for serial devices. Starting OpenBSD Secure Shell server... Starting A high performance web server and a reverse proxy server... [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. Starting KNX Daemon... Starting Permit User Sessions... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started Permit User Sessions. [FAILED] Failed to start KNX Daemon. See 'systemctl status knxd.service' for details. [ OK ] Stopped Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Reached target Network is Online. Starting LSB: Brings up/down network automatically... Starting LSB: Start NTP daemon... Starting LSB: Advanced IEEE 802.11 management daemon... Starting LSB: : Wiren Board MQTT KNX bridge... [ OK ] Stopped Wiren Board MQTT to OPC UA gateway. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Stopped Wiren Board MQTT to Modbus TCP gateway. Starting Wiren Board MQTT to Modbus TCP gateway... [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttymxc0. [ OK ] Reached target Login Prompts. [ OK ] Started OpenBSD Secure Shell server. [FAILED] Failed to start Wiren Board MQTT to OPC UA gateway. See 'systemctl status wb-mqtt-opcua.service' for details. [ OK ] Started LSB: Start NTP daemon. [ 29.285235] SMSC LAN8710/LAN8720 2188000.ethernet:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1) [ OK ] Started LSB: : Wiren Board MQTT KNX bridge. [ 29.475340] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 29.494754] random: crng init done Starting Compensation of systime in…evice-tree (with opposite sign)... Starting LSB: board-specific initscript... [ OK ] Stopped Wiren Board MQTT to OPC UA gateway. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Stopped Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started dnsmasq - A lightweight DHCP and caching DNS server. [ OK ] Started A high performance web server and a reverse proxy server. Debian GNU/Linux 9 wirenboard-AJLDR4R4 ttymxc0 wirenboard-AJLDR4R4 login: [ 34.382892] RTL871X: RTW_ADAPTIVITY_EN_[ 34.386760] AUTO, chplan:0x20, Regulation:3,3 [ 34.391133] RTL871X: RTW_ADAPTIVITY_MODE_[ 34.395055] NORMAL [ 38.315601] Micrel KSZ8081 or KSZ8091 2188000.ethernet:03: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet:03, irq=-1) [ 38.458983] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 38.569609] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 38.837642] RTL871X: assoc success [ 38.841232] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready