▒OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd o tp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 2 ms (159.2 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6480808 bytes read in 139 ms (44.5 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard733 54746 bytes read in 4 ms (13.1 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-commercial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x62e3a8 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb133+wb101 (jenkins@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon May 29 08:56:14 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.3.3 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0xbec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 2043860K/2097152K available (10240K kernel code, 1478K rwdata, 3232K rodata, 1024K init, 306K bss, 36908K reserved, 16384K cma-reserved, 1294324K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31894 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000020] Switching to timer-based delay loop, resolution 41ns [ 0.000331] Console: colour dummy device 80x30 [ 0.000401] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000429] pid_max: default: 32768 minimum: 301 [ 0.000666] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000692] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001865] CPU: Testing write buffer coherency: ok [ 0.002290] /cpus/cpu@0 missing clock-frequency property [ 0.002334] /cpus/cpu@1 missing clock-frequency property [ 0.002374] /cpus/cpu@2 missing clock-frequency property [ 0.002420] /cpus/cpu@3 missing clock-frequency property [ 0.002437] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003497] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.003699] rcu: Hierarchical SRCU implementation. [ 0.004608] smp: Bringing up secondary CPUs ... [ 0.015723] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.026958] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.038110] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.038290] smp: Brought up 1 node, 4 CPUs [ 0.038326] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.038339] CPU: All CPU(s) started in HYP mode. [ 0.038350] CPU: Virtualization extensions available. [ 0.039507] devtmpfs: initialized [ 0.051588] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.051887] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.051922] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.052911] pinctrl core: initialized pinctrl subsystem [ 0.054397] NET: Registered protocol family 16 [ 0.056915] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.058196] thermal_sys: Registered thermal governor 'step_wise' [ 0.058659] No ATAGs? [ 0.058883] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.058899] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.106704] SCSI subsystem initialized [ 0.106961] usbcore: registered new interface driver usbfs [ 0.107023] usbcore: registered new interface driver hub [ 0.107094] usbcore: registered new device driver usb [ 0.107461] mc: Linux media interface: v0.10 [ 0.107511] videodev: Linux video capture interface: v2.00 [ 0.107584] pps_core: LinuxPPS API ver. 1 registered [ 0.107597] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.107626] PTP clock support registered [ 0.107918] Advanced Linux Sound Architecture Driver Initialized. [ 0.109159] clocksource: Switched to clocksource arch_sys_counter [ 0.747859] NET: Registered protocol family 2 [ 0.748796] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.748851] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.748933] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.749056] TCP: Hash tables configured (established 8192 bind 8192) [ 0.749275] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.749352] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.749611] NET: Registered protocol family 1 [ 0.750368] RPC: Registered named UNIX socket transport module. [ 0.750391] RPC: Registered udp transport module. [ 0.750404] RPC: Registered tcp transport module. [ 0.750416] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.752017] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.753582] Initialise system trusted keyrings [ 0.753858] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 0.762437] NFS: Registering the id_resolver key type [ 0.762491] Key type id_resolver registered [ 0.762504] Key type id_legacy registered [ 0.857252] Key type asymmetric registered [ 0.857278] Asymmetric key parser 'x509' registered [ 0.857429] bounce: pool size: 64 pages [ 0.857504] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.857522] io scheduler mq-deadline registered [ 0.857535] io scheduler kyber registered [ 0.858664] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.939990] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.954230] brd: module loaded [ 0.965047] loop: module loaded [ 0.970620] libphy: Fixed MDIO Bus: probed [ 0.971792] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 0.972436] libphy: sun4i_mii_bus: probed [ 0.974498] CAN device driver interface [ 0.976461] PPP generic driver version 2.4.2 [ 0.976723] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.976739] ehci-platform: EHCI generic platform driver [ 0.977734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.977772] ohci-platform: OHCI generic platform driver [ 0.978821] usbcore: registered new interface driver usb-storage [ 0.978935] usbcore: registered new interface driver usbserial_generic [ 0.978975] usbserial: USB Serial support registered for generic [ 0.981094] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 0.981116] sun6i-rtc 1c20400.rtc: RTC enabled [ 0.981473] i2c /dev entries driver [ 0.987498] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.990549] ledtrig-cpu: registered to indicate activity on CPUs [ 0.991159] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 0.991512] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.992184] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.992388] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.992577] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.992733] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 0.992936] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 0.993126] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 0.993313] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 0.993512] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 0.995266] usbcore: registered new interface driver usbhid [ 0.995285] usbhid: USB HID core driver [ 0.997798] iio-rescale a1-volt: using raw+scale source channel [ 0.998181] iio-rescale a2-volt: using raw+scale source channel [ 0.998511] iio-rescale a3-volt: using raw+scale source channel [ 0.998821] iio-rescale vin-volt: using raw+scale source channel [ 1.001716] Initializing XFRM netlink socket [ 1.002362] NET: Registered protocol family 10 [ 1.003448] Segment Routing with IPv6 [ 1.003585] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.004306] NET: Registered protocol family 17 [ 1.004337] can: controller area network core [ 1.004437] NET: Registered protocol family 29 [ 1.004452] can: raw protocol [ 1.004465] can: broadcast manager protocol [ 1.004485] can: netlink gateway - max_hops=1 [ 1.004921] Key type dns_resolver registered [ 1.005019] Registering SWP/SWPB emulation handler [ 1.005129] registered taskstats version 1 [ 1.005190] Loading compiled-in X.509 certificates [ 1.024736] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.029253] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.030035] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.034761] printk: console [ttyS0] disabled [ 1.034917] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 52, base_baud = 1500000) is a Allwinner sun4i [ 1.996892] printk: console [ttyS0] enabled [ 2.002100] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.008895] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.015567] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.022907] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.033621] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.041975] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.050054] libphy: sun4i_mii_bus: probed [ 2.054968] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.061820] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.068436] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.077933] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.084760] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.091401] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.098884] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.109414] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.117781] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.124586] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.131043] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.138351] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.148707] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.163271] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.177275] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0034/axp221-pek/input/input0 [ 2.197268] vcc-3v3: supplied by regulator-dummy [ 2.202886] vdd-cpu: supplied by regulator-dummy [ 2.208420] vdd-sys: supplied by regulator-dummy [ 2.213942] dcdc4: supplied by regulator-dummy [ 2.219334] vcc-dram: supplied by regulator-dummy [ 2.224196] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.231208] vcc-gmac-phy: supplied by vcc-3v3 [ 2.236640] dc5ldo: supplied by vcc-dram [ 2.240762] random: fast init done [ 2.244498] tv: Bringing 700000uV into 3300000-3300000uV [ 2.250484] tv: supplied by regulator-dummy [ 2.255291] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.261654] aldo2: supplied by regulator-dummy [ 2.267450] avcc-pll: supplied by regulator-dummy [ 2.273120] eldo1: supplied by regulator-dummy [ 2.278508] eldo2: supplied by regulator-dummy [ 2.283604] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.290475] vcc-pe: supplied by regulator-dummy [ 2.295598] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.302629] vcc-sd-alt: supplied by regulator-dummy [ 2.308423] dldo2: supplied by regulator-dummy [ 2.313858] dldo3: supplied by regulator-dummy [ 2.319257] dldo4: supplied by regulator-dummy [ 2.324200] rtc_ldo: supplied by regulator-dummy [ 2.329737] ldo_io0: supplied by regulator-dummy [ 2.335210] ldo_io1: supplied by regulator-dummy [ 2.340628] axp20x-adc axp22x-adc: DMA mask not set [ 2.347239] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 2.357287] axp20x-i2c 0-0034: AXP20X driver loaded [ 2.387397] rtc-pcf85063 2-0051: registered as rtc0 [ 2.401694] rtc-pcf85063 2-0051: setting system clock to 2024-06-04T08:27:10 UTC (1717489630) [ 2.410768] lm75 2-0048: supply vs not found, using dummy regulator [ 2.421444] lm75 2-0048: hwmon1: sensor 'lm75b' [ 2.450806] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 2.459341] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 2.469794] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.476601] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 2.477735] libphy: sun4i_mii_bus: probed [ 2.572897] mmc0: new DDR MMC card at address 0001 [ 2.578602] mmcblk0: mmc0:0001 MMC64G 58.2 GiB [ 2.583593] mmcblk0boot0: mmc0:0001 MMC64G partition 1 4.00 MiB [ 2.589996] mmcblk0boot1: mmc0:0001 MMC64G partition 2 4.00 MiB [ 2.596245] mmcblk0rpmb: mmc0:0001 MMC64G partition 3 4.00 MiB, chardev (246:0) [ 2.607047] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.632813] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 65 MAC: 00:85:01:01:f4:9e [ 2.641996] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 2.648354] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 2.654717] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 2.660823] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 2.668048] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 2.675289] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 2.680272] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 2.687057] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 2.692726] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 2.699036] libphy: stmmac: probed [ 2.961568] ehci-platform 1c14000.usb: EHCI Host Controller [ 2.967179] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 2.975410] ehci-platform 1c14000.usb: irq 37, io mem 0x01c14000 [ 3.009164] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.016249] hub 1-0:1.0: USB hub found [ 3.020120] hub 1-0:1.0: 1 port detected [ 3.025261] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.030887] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.038910] ehci-platform 1c19000.usb: irq 39, io mem 0x01c19000 [ 3.069162] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.076187] hub 2-0:1.0: USB hub found [ 3.080015] hub 2-0:1.0: 1 port detected [ 3.085108] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.090729] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.098695] ehci-platform 1c1c000.usb: irq 41, io mem 0x01c1c000 [ 3.129486] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.136495] hub 3-0:1.0: USB hub found [ 3.140331] hub 3-0:1.0: 1 port detected [ 3.239253] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.245893] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.253868] ohci-platform 1c14400.usb: irq 38, io mem 0x01c14400 [ 3.334030] hub 4-0:1.0: USB hub found [ 3.337838] hub 4-0:1.0: 1 port detected [ 3.342954] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 3.349610] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 3.357525] ohci-platform 1c19400.usb: irq 40, io mem 0x01c19400 [ 3.434041] hub 5-0:1.0: USB hub found [ 3.437859] hub 5-0:1.0: 1 port detected [ 3.442941] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 3.449604] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 3.457551] ohci-platform 1c1c400.usb: irq 42, io mem 0x01c1c400 [ 3.463615] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 3.534082] hub 6-0:1.0: USB hub found [ 3.537889] hub 6-0:1.0: 1 port detected [ 3.543663] of_cfs_init [ 3.544989] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 3.546251] of_cfs_init: OK [ 3.558028] ALSA device list: [ 3.561048] No soundcards found. [ 3.576046] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 3.596506] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 3.603879] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 3.894543] EXT4-fs (mmcblk0p2): recovery complete [ 3.900315] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.908494] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.916060] devtmpfs: mounted [ 3.923830] Freeing unused kernel memory: 1024K [ 3.928602] Run /sbin/init as init process [ 4.163191] systemd[1]: systemd 247.3-7+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.187266] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.230501] systemd[1]: Set hostname to . [ 4.963360] systemd[1]: Queued start job for default target Graphical Interface. [ 4.973008] random: systemd: uninitialized urandom read (16 bytes read) [ 4.983682] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.019450] random: systemd: uninitialized urandom read (16 bytes read) [ 5.027999] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.069412] random: systemd: uninitialized urandom read (16 bytes read) [ 5.078163] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.121223] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.161012] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.199898] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.239726] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.279707] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.291774] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.329859] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.369446] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.400582] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.439953] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 5.490555] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 5.499880] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.540356] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.579324] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.620213] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.660275] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 5.674389] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.715138] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 5.755389] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 5.795849] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 5.837434] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 5.886364] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 5.926433] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 5.951099] fuse: init (API version 7.32) [ 5.961973] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.977888] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.030711] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.049122] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.064289] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.086909] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 6.094655] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 6.105910] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System 6.116893] systemd[1]: Mounted Kernel Trace File System. m. [ OK ] Mounted Kernel Trace File System. [ 6.182158] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.232751] systemd[1]: modprobe@drm.service: Succeeded. [ 6.239876] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.281176] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.288308] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 6.330121] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 6.569456] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Rule-based Manage…for Device Events and Files... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Finished Coldplug All udev Devices. [ 7.512705] Driver for 1-wire Dallas network protocol. Starting Helper to synchronize boot up for ifupdown... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ 7.711869] usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, using dummy regulator [ 7.947154] Bluetooth: Core ver 2.22 [ 7.951099] NET: Registered protocol family 31 [ 7.955592] Bluetooth: HCI device and connection manager initialized [ 7.962100] Bluetooth: HCI socket layer initialized [ 7.967019] Bluetooth: L2CAP socket layer initialized [ 7.972199] Bluetooth: SCO socket layer initialized [ 7.992317] usbcore: registered new interface driver btusb [ 8.038133] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.038255] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 8.056282] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 8.062449] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 8.071935] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 8.078435] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 8.088165] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 8.148426] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.182439] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/mmcblk0p6. [ OK ] Found device /dev/ttyS0. [ 8.699841] RTL871X: module init start [ 8.703632] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ 8.906114] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 Activating swap /dev/mmcblk0p5... [ 8.933316] RTL871X: rtw_ndev_init(wlan0) [ 8.938696] RTL871X: rtw_ndev_init(wlan1) [ 8.944199] usbcore: registered new interface driver rtl8723bu [ 8.950097] RTL871X: module init ret=0 Starting File System Check on /dev/mmcblk0p6... [ 9.099798] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SS [ 9.114880] usbcore: registered new interface driver rtl8xxxu [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Finished File System Check on /dev/mmcblk0p6. [ 10.349216] random: crng init done [ 10.352651] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Reached target Swap. [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Mounting /mnt/data... Starting Load/Save RF Kill Switch Status... [ 11.190728] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /mnt/data. [ OK ] Started Load/Save RF Kill Switch Status. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 11.411487] systemd-journald[138]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config files... [ 11.435161] systemd-journald[138]: File /var/log/journal/f78ddcf1853b45d5a1f2b96d6cc88a11/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Monitor directorie… templates for wb-mqtt-serial. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Paths. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Authorization Manager... [ 13.152593] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.157961] Bluetooth: BNEP filters: protocol multicast [ 13.163350] Bluetooth: BNEP socket layer initialized Starting User Login Management... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... [ OK ] Started Generates wb-mqtt-… UI schema for wb-mqtt-confed. Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started Authorization Manager. [ OK ] Started Bluetooth service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started User Login Management. [ OK ] Started WPA supplicant. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. [ OK ] Started Network Manager. Starting Network Manager Wait Online... Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ 15.370581] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 15.393804] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 15.401316] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 15.409010] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 15.440320] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ 21.355307] RTL871X: assoc success [ 21.360083] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 21.432204] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 130, base_baud = 1500000) is a Allwinner sun4i [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Finished Network Manager Wait Online. [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... [FAILED] Failed to start KNX Daemon. See 'systemctl status knxd.service' for details. [ OK ] Reached target Network is Online. Starting Mosquitto MQTT Broker... Starting LSB: Brings up/down network automatically... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started Wiren Board MQTT KNX bridge. [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [ OK ] Finished Permit User Sessions. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Getty on tty1. [ 24.938591] process '/usr/sbin/netplugd' started with executable stack [ OK ] Stopped KNX Daemon. Starting KNX Daemon... Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Stopped OpenBSD Secure Shell server. Starting OpenBSD Secure Shell server... Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Started Mosquitto MQTT Broker. [ OK ] Started KNX Daemon. [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost… generating archive with data. [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. [ OK ] Started Wiren Board journald to MQTT gateway. Starting Wiren Board MQTT to Modbus TCP gateway... [ OK ] Started metrics sender.. [ OK ] Started Virtual MQTT devic…r Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started MQTT Rule engine for Wiren Board. [ OK ] Started Wiren Board firmware update service. [ OK ] Finished KNXD Configurator for Wiren Board. [ OK ] Stopped OpenBSD Secure Shell server. Starting OpenBSD Secure Shell server... [ OK ] Finished Compensation of s…ice-tree (with opposite sign). [ OK ] Started Wiren Board MQTT to OPC UA gateway. [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [ OK ] Stopped OpenBSD Secure Shell server. Starting OpenBSD Secure Shell server... [ INFO ] Skipped Power on GSM modem. [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [ OK ] Started LSB: Brings up/down network automatically. [ OK ] Stopped OpenBSD Secure Shell server. Starting OpenBSD Secure Shell server... [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [ OK ] Stopped OpenBSD Secure Shell server. [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [ OK ] Started A high performance…er and a reverse proxy server. Starting Initialize Wiren Board on successful boot... Starting USB Debug Network... Debian GNU/Linux 11 wirenboard-AU5ODMOJ ttyS0 wirenboard-AU5ODMOJ login: [ 31.629482] Mass Storage Function, version: 2009/09/11 [ 31.634758] LUN: removable file: (no medium) [ 31.707784] using random self ethernet address [ 31.712446] using random host ethernet address [ 31.829465] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 31.834063] dbg0: MAC 1a:55:89:a2:69:43 [ 33.759319] vcc-gmac-phy: disabling [ 33.763240] dc5ldo: disabling [ 33.766671] dldo4: disabling [ 33.771250] vdd-sd-power: disabling [ 33.774775] vcc-sd: disabling [ 66.720162] systemd-journald[138]: Received SIGTERM from PID 2954 (watchdog). [ 67.273945] systemd[1]: systemd 247.3-7+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 67.297978] systemd[1]: Detected architecture arm. [ 71.806396] EXT4-fs (mmcblk0p2): re-mounted. Opts: [ 160.444031] systemd[1]: Failed to deserialized tracked clients, ignoring: Transport endpoint is not connected [ 160.626227] systemd[1]: systemd-udevd.service: Succeeded. [ 160.633674] systemd[1]: systemd-udevd.service: Consumed 7.929s CPU time. [ 160.644358] systemd[1]: bluetooth.service: Succeeded. [ 160.652215] systemd[1]: cron.service: Succeeded. [ 160.660425] systemd[1]: dbus.service: Succeeded. [ 160.666620] systemd[1]: dbus.service: Consumed 1.477s CPU time. [ 160.683240] systemd[1]: polkit.service: Succeeded. [ 160.691135] systemd[1]: systemd-logind.service: Succeeded. [ 160.701191] systemd[1]: wb-configs.service: Succeeded. [ 160.710085] systemd[1]: avahi-daemon.service: Succeeded. [ 160.718594] systemd[1]: wpa_supplicant.service: Succeeded. [ 160.729116] systemd[1]: ModemManager.service: Succeeded. [ 160.736248] systemd[1]: ModemManager.service: Consumed 2.277s CPU time. [ 160.746494] systemd[1]: NetworkManager.service: Succeeded. [ 160.754014] systemd[1]: NetworkManager.service: Consumed 3.276s CPU time. [ 160.764048] systemd[1]: wb-connection-manager.service: Succeeded. [ 160.773573] systemd[1]: wb-mqtt-serial.service: Succeeded. [ 160.781687] systemd[1]: wb-mqtt-serial.service: Consumed 1.662s CPU time. [ 160.790377] systemd[1]: ntp.service: Succeeded. [ 160.798414] systemd[1]: mosquitto.service: Succeeded. [ 160.808163] systemd[1]: getty@tty1.service: Succeeded. [ 160.818120] systemd[1]: serial-getty@ttyS0.service: Succeeded. [ 160.830867] systemd[1]: wb-device-manager.service: Main process exited, code=killed, status=9/KILL [ 160.842163] systemd[1]: wb-device-manager.service: Failed with result 'signal'. [ 160.851265] systemd[1]: wb-device-manager.service: Consumed 1.319s CPU time. [ 160.860727] systemd[1]: wb-diag-collect.service: Main process exited, code=killed, status=9/KILL [ 160.870584] systemd[1]: wb-diag-collect.service: Failed with result 'signal'. [ 160.879936] systemd[1]: wb-diag-collect.service: Consumed 1.377s CPU time. [ 160.888526] systemd[1]: wb-mqtt-confed.service: Succeeded. [ 160.895621] systemd[1]: wb-mqtt-confed.service: Consumed 4.225s CPU time. [ 160.904092] systemd[1]: wb-mqtt-db.service: Succeeded. [ 160.912322] systemd[1]: wb-mqtt-logs.service: Succeeded. [ 160.921705] systemd[1]: wb-mqtt-metrics.service: Succeeded. [ 160.928695] systemd[1]: wb-mqtt-metrics.service: Consumed 2.146s CPU time. [ 160.937334] systemd[1]: wb-mqtt-nm-helper.service: Succeeded. [ 160.944509] systemd[1]: wb-mqtt-nm-helper.service: Consumed 1.868s CPU time. [ 160.952510] systemd[1]: wb-rules.service: Main process exited, code=exited, status=2/INVALIDARGUMENT [ 160.963893] systemd[1]: wb-rules.service: Failed with result 'exit-code'. [ 160.972256] systemd[1]: wb-rules.service: Consumed 8.890s CPU time. [ 160.982845] systemd[1]: wb-watch-update.service: Succeeded. [ 160.991567] systemd[1]: wb-mqtt-opcua.service: Succeeded. [ 161.007079] systemd[1]: wb-mqtt-mbgate.service: Succeeded. [ 161.014552] systemd[1]: wb-mqtt-mbgate.service: Consumed 1.346s CPU time. [ 161.023678] systemd[1]: wb-mqtt-adc.service: Succeeded. [ 161.030522] systemd[1]: wb-mqtt-adc.service: Consumed 3.074s CPU time. [ 161.038990] systemd[1]: wb-mqtt-gpio.service: Succeeded. [ 161.045798] systemd[1]: wb-mqtt-gpio.service: Consumed 6.385s CPU time. [ 161.053415] systemd[1]: wb-mqtt-knx.service: Main process exited, code=killed, status=9/KILL [ 161.064911] systemd[1]: wb-mqtt-knx.service: Failed with result 'signal'. [ 161.075113] systemd[1]: wb-mqtt-w1.service: Succeeded. [ 161.086870] systemd[1]: nginx.service: Succeeded. [ 161.094113] systemd[1]: Received SIGTERM from PID 2954 (watchdog). [ 161.143926] systemd[1]: Reexecuting. [ 161.398323] systemd[1]: systemd 247.3-7+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 161.422619] systemd[1]: Detected architecture arm. [ 164.572062] systemd[1]: wb-device-manager.service: Scheduled restart job, restart counter is at 1. [ 164.583736] systemd[1]: wb-mqtt-adc.service: Scheduled restart job, restart counter is at 1. [ 164.594008] systemd[1]: wb-mqtt-mbgate.service: Scheduled restart job, restart counter is at 1. [ 164.604895] systemd[1]: wb-rules.service: Scheduled restart job, restart counter is at 1. [ 164.616083] systemd[1]: wb-mqtt-logs.service: Scheduled restart job, restart counter is at 1. [ 164.626359] systemd[1]: wb-diag-collect.service: Scheduled restart job, restart counter is at 1. [ 164.637508] systemd[1]: serial-getty@ttyS0.service: Scheduled restart job, restart counter is at 1. [ 164.648295] systemd[1]: getty@tty1.service: Scheduled restart job, restart counter is at 1. [ 164.658523] systemd[1]: systemd-logind.service: Scheduled restart job, restart counter is at 1. [ 164.667446] systemd[1]: systemd-udevd.service: Scheduled restart job, restart counter is at 1. [ 164.676781] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 164.687392] systemd[1]: knxd.service: Scheduled restart job, restart counter is at 5. [ 164.704291] systemd[1]: wb-mqtt-opcua.service: Scheduled restart job, restart counter is at 1. [ 164.714250] systemd[1]: mnt-sdcard.automount: Got hangup/error on autofs pipe from kernel. Likely our automount point has been unmounted by someone or something else? [ 164.729173] systemd[1]: mnt-sdcard.automount: Failed with result 'unmounted'. [ 164.744454] systemd[1]: Mounting /mnt/data... [ 164.757147] systemd[1]: Started D-Bus System Message Bus. [ 164.796434] systemd[1]: Stopped Getty on tty1. [ 164.809438] systemd[1]: Started Getty on tty1. [ 164.814596] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ 164.817320] systemd[1]: Stopped KNX Daemon. [ 164.835164] systemd[1]: Starting KNX Daemon... [ 164.842658] systemd[1]: Stopped Serial Getty on ttyS0. [ 164.855986] systemd[1]: Started Serial Getty on ttyS0. [ 164.868091] systemd[1]: Stopping Flush Journal to Persistent Storage... [ 164.878389] systemd[1]: Stopped User Login Management. [ 164.892310] systemd[1]: Starting Load Kernel Module drm... [ 164.900649] systemd[1]: Stopped Rule-based Manager for Device Events and Files. [ 164.920663] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 164.931116] systemd[1]: Stopped Wiren Board modbus devices manager. [ 164.944734] systemd[1]: Started Wiren Board modbus devices manager. [ 164.953938] systemd[1]: Stopped one-click diagnostic data collector for Wiren Board, generating archive with data. [ 164.974038] systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data. [ 164.987876] systemd[1]: Stopped MQTT Driver for ADC. [ 165.000527] systemd[1]: Starting MQTT Driver for ADC... [ 165.008999] systemd[1]: Stopped Wiren Board journald to MQTT gateway. [ 165.025418] systemd[1]: Started Wiren Board journald to MQTT gateway. [ 165.036203] systemd[1]: Stopped Wiren Board MQTT to Modbus TCP gateway. [ 165.051594] systemd[1]: Starting Wiren Board MQTT to Modbus TCP gateway... [ 165.061683] systemd[1]: Stopped Wiren Board MQTT to OPC UA gateway. [ 165.100361] systemd[1]: Starting Wiren Board MQTT to OPC UA gateway... [ 165.121511] systemd[1]: Stopped MQTT Rule engine for Wiren Board. [ 165.150552] systemd[1]: Started MQTT Rule engine for Wiren Board. [ 165.205062] systemd[1]: Started KNX Daemon. [ 165.242272] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 165.252839] systemd[1]: Mounted /mnt/data. [ 165.258539] systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE [ 165.290160] systemd[1]: knxd.service: Failed with result 'exit-code'. [ 165.303938] systemd[1]: systemd-journal-flush.service: Succeeded. [ 165.331757] systemd[1]: Stopped Flush Journal to Persistent Storage. [ 165.352074] systemd[1]: modprobe@drm.service: Succeeded. [ 165.365739] systemd[1]: Finished Load Kernel Module drm. [ 165.373285] systemd[1]: wb-mqtt-logs.service: Main process exited, code=killed, status=6/ABRT [ 165.383559] systemd[1]: wb-mqtt-logs.service: Failed with result 'signal'. [ 165.395127] systemd[1]: wb-mqtt-opcua.service: Control process exited, code=exited, status=1/FAILURE [ 165.406836] systemd[1]: wb-mqtt-opcua.service: Failed with result 'exit-code'. [ 165.416357] systemd[1]: Failed to start Wiren Board MQTT to OPC UA gateway. [ 165.428887] systemd[1]: wb-rules.service: Main process exited, code=exited, status=2/INVALIDARGUMENT [ 165.439662] systemd[1]: wb-rules.service: Failed with result 'exit-code'. [ 165.451883] systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway. [ 165.471165] systemd[1]: Mounting /var/log... [ 165.478597] systemd[1]: Stopped Journal Service. [ 165.498229] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 165.520327] systemd[1]: Starting Journal Service... [ 165.552852] systemd[1]: Starting User Login Management... [ 165.594244] systemd[1]: Mounted /var/log. [ 165.887597] systemd[1]: Started User Login Management. [ 165.996747] systemd[1]: Started Journal Service. [ 166.136668] systemd-journald[3350]: Received client request to flush runtime journal. Debian GNU/Linux 11 wirenboard-AU5ODMOJ ttyS0 wirenboard-AU5ODMOJ login: