[EC] Watchdog is timed out, reset power. U-Boot SPL 2024.01-g93c03f11a3 (May 23 2024 - 08:58:29 +0000) DRAM: 4096 MiB Tr........................... 328 bytes read in 1 ms (320.3 KiB/s) Importing environment from 0x40080000... Checking if uenvcmd is set ... Running default loadzimage ... 9685285 bytes read in 2143 ms (4.3 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Working FDT set to 4fe00000 Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt allwinner/sun50i-h616-wirenboard843 49722 bytes read in 13 ms (3.6 MiB/s) Working FDT set to 4fa00000 254 bytes read in 1 ms (248 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Uncompressing Kernel Image Moving Image from 0x40080000 to 0x40200000, end=41970000 ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 Working FDT set to 4fa00000 Loading Device Tree to 0000000049fdd000, end 0000000049ffffff ... OK Working FDT set to 49fdd000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.8.0-wb140 (root@wbdevenv) (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Fri Jul 18 08:08:05 UTC 2025 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Wiren Board rev. 8.4.3 (T507) [ 0.000000] efi: UEFI not found. [ 0.000000] OF: reserved mem: 0x0000000040000000..0x000000004003ffff (256 KiB) nomap non-reusable secmon@40000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x13f7b19c0-0x13f7b3fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000004003ffff] [ 0.000000] node 0: [mem 0x0000000040040000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 22 pages/cpu s49768 r8192 d32152 u90112 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 [ 0.000000] Policy zone: Normal [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) [ 0.000000] Memory: 3990384K/4194304K available (13632K kernel code, 1454K rwdata, 4872K rodata, 3264K init, 542K bss, 171152K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000604] Console: colour dummy device 80x25 [ 0.000691] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000705] pid_max: default: 32768 minimum: 301 [ 0.000784] LSM: initializing lsm=capability,integrity [ 0.000895] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000918] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001969] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.002683] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.002918] rcu: Hierarchical SRCU implementation. [ 0.002921] rcu: Max phase no-delay instances is 1000. [ 0.003413] EFI services will not be available. [ 0.003651] smp: Bringing up secondary CPUs ... [ 0.004201] Detected VIPT I-cache on CPU1 [ 0.004284] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.004810] Detected VIPT I-cache on CPU2 [ 0.004856] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.005335] Detected VIPT I-cache on CPU3 [ 0.005380] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.005453] smp: Brought up 1 node, 4 CPUs [ 0.005459] SMP: Total of 4 processors activated. [ 0.005463] CPU: All CPU(s) started at EL2 [ 0.005487] CPU features: detected: 32-bit EL0 Support [ 0.005491] CPU features: detected: 32-bit EL1 Support [ 0.005496] CPU features: detected: CRC32 instructions [ 0.005537] alternatives: applying system-wide alternatives [ 0.008236] devtmpfs: initialized [ 0.016999] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.017024] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.018336] pinctrl core: initialized pinctrl subsystem [ 0.018793] DMI not present or invalid. [ 0.019787] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.020658] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.020785] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.020967] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.021000] audit: initializing netlink subsys (disabled) [ 0.021133] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 [ 0.021557] thermal_sys: Registered thermal governor 'step_wise' [ 0.021562] thermal_sys: Registered thermal governor 'power_allocator' [ 0.021602] cpuidle: using governor menu [ 0.021745] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.021825] ASID allocator initialised with 65536 entries [ 0.022005] Serial: AMBA PL011 UART driver [ 0.026740] platform 3001000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.030616] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/lcd-controller@6515000 [ 0.030634] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000 [ 0.030795] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/lcd-controller@6515000 [ 0.030862] platform 6515000.lcd-controller: Fixed dependency cycle(s) with /soc/tcon-top@6510000 [ 0.031113] platform 3001000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.031165] platform 7000000.rtc: Fixed dependency cycle(s) with /soc/clock@3001000 [ 0.031222] platform 7000000.rtc: Fixed dependency cycle(s) with /soc/clock@7010000 [ 0.031319] platform 7000000.rtc: Fixed dependency cycle(s) with /soc/clock@7010000 [ 0.031381] platform 7010000.clock: Fixed dependency cycle(s) with /soc/clock@3001000 [ 0.031435] platform 7010000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.036081] Modules: 26768 pages in range for non-PLT usage [ 0.036087] Modules: 518288 pages in range for PLT usage [ 0.036876] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.036881] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.036886] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.036891] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.036896] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.036899] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.036904] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.036908] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.038163] ACPI: Interpreter disabled. [ 0.038772] iommu: Default domain type: Translated [ 0.038777] iommu: DMA domain TLB invalidation policy: strict mode [ 0.039103] SCSI subsystem initialized [ 0.039419] usbcore: registered new interface driver usbfs [ 0.039447] usbcore: registered new interface driver hub [ 0.039476] usbcore: registered new device driver usb [ 0.039806] pps_core: LinuxPPS API ver. 1 registered [ 0.039810] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.039825] PTP clock support registered [ 0.039861] EDAC MC: Ver: 3.0.0 [ 0.040188] scmi_core: SCMI protocol bus registered [ 0.040512] FPGA manager framework [ 0.040602] Advanced Linux Sound Architecture Driver Initialized. [ 0.041601] clocksource: Switched to clocksource arch_sys_counter [ 0.041803] VFS: Disk quotas dquot_6.6.0 [ 0.041834] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.042018] pnp: PnP ACPI: disabled [ 0.048773] NET: Registered PF_INET protocol family [ 0.048989] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.052286] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.052337] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.052352] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.052608] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.053904] TCP: Hash tables configured (established 32768 bind 32768) [ 0.054011] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.054106] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.054296] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.054735] RPC: Registered named UNIX socket transport module. [ 0.054740] RPC: Registered udp transport module. [ 0.054743] RPC: Registered tcp transport module. [ 0.054746] RPC: Registered tcp-with-tls transport module. [ 0.054749] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.055108] kvm [1]: IPA Size Limit: 40 bits [ 0.056455] kvm [1]: vgic interrupt IRQ9 [ 0.056491] kvm [1]: Hyp mode initialized successfully [ 0.057749] Initialise system trusted keyrings [ 0.057916] workingset: timestamp_bits=42 max_order=20 bucket_order=0 [ 0.058218] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.058419] NFS: Registering the id_resolver key type [ 0.058440] Key type id_resolver registered [ 0.058444] Key type id_legacy registered [ 0.058466] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.058472] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.058586] 9p: Installing v9fs 9p2000 file system support [ 0.121810] Key type asymmetric registered [ 0.121815] Asymmetric key parser 'x509' registered [ 0.121861] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.121868] io scheduler mq-deadline registered [ 0.121873] io scheduler kyber registered [ 0.121905] io scheduler bfq registered [ 0.125156] EINJ: ACPI disabled. [ 0.134736] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled [ 0.142834] loop: module loaded [ 0.147143] tun: Universal TUN/TAP device driver, 1.6 [ 0.148476] VFIO - User Level meta-driver version: 0.3 [ 0.149786] usbcore: registered new interface driver usb-storage [ 0.149848] usbcore: registered new interface driver usbserial_generic [ 0.149871] usbserial: USB Serial support registered for generic [ 0.149896] usbcore: registered new interface driver ch341 [ 0.149916] usbserial: USB Serial support registered for ch341-uart [ 0.152643] sun6i-rtc 7000000.rtc: registered as rtc1 [ 0.153032] i2c_dev: i2c /dev entries driver [ 0.153285] mv64xxx_i2c 7081400.i2c: can't get pinctrl, bus recovery not supported [ 0.153996] axp20x-i2c 0-0036: AXP20x variant AXP15060 found [ 0.154217] axp20x-i2c 0-0036: AXP20X driver loaded [ 0.156993] sdhci: Secure Digital Host Controller Interface driver [ 0.156997] sdhci: Copyright(c) Pierre Ossman [ 0.157317] Synopsys Designware Multimedia Card Interface Driver [ 0.158061] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.159073] ledtrig-cpu: registered to indicate activity on CPUs [ 0.159506] SMCCC: SOC_ID: ID = jep106:091e:1823 Revision = 0x00000002 [ 0.159934] usbcore: registered new interface driver usbhid [ 0.159938] usbhid: USB HID core driver [ 0.161402] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.163708] usbcore: registered new interface driver snd-usb-audio [ 0.164270] NET: Registered PF_PACKET protocol family [ 0.164276] can: controller area network core [ 0.164323] NET: Registered PF_CAN protocol family [ 0.164595] 9pnet: Installing 9P2000 support [ 0.164655] Key type dns_resolver registered [ 0.173964] registered taskstats version 1 [ 0.174134] Loading compiled-in X.509 certificates [ 0.191961] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000 [ 0.192043] platform 1100000.mixer: Fixed dependency cycle(s) with /soc/tcon-top@6510000 [ 0.193493] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.201302] sun50i-h616-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 0.202009] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.202264] sun50i-h616-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver [ 0.202970] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator [ 0.203454] printk: legacy console [ttyS0] disabled [ 0.224035] dw-apb-uart 5000000.serial: detected caps 00000100 should be 00040100 [ 0.224045] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 284, base_baud = 1500000) is a 16550A [ 0.224087] printk: legacy console [ttyS0] enabled [ 1.488174] dw-apb-uart 5000400.serial: detected caps 00000100 should be 00040100 [ 1.495671] 5000400.serial: ttyS1 at MMIO 0x5000400 (irq = 285, base_baud = 1500000) is a 16550A [ 1.525721] dw-apb-uart 5000800.serial: detected caps 00000100 should be 00040100 [ 1.533212] 5000800.serial: ttyS2 at MMIO 0x5000800 (irq = 286, base_baud = 1500000) is a 16550A [ 1.542712] sun6i-spi 5011000.spi: Failed to request TX DMA channel [ 1.548992] sun6i-spi 5011000.spi: Failed to request RX DMA channel [ 1.555915] wbec spi0.0: WBEC not found with v2 protocol, trying v1 [ 1.562299] wbec spi0.0: WBEC found with v1 protocol [ 1.568333] input: wbec pwrkey as /devices/platform/soc/5011000.spi/spi_master/spi0/spi0.0/5011000.spi:wbec@0:wbec-pwrkey@0/input/input0 [ 1.581933] wbec-rtc 5011000.spi:wbec@0:wbec-rtc@0: registered as rtc0 [ 1.588613] wbec-rtc 5011000.spi:wbec@0:wbec-rtc@0: setting system clock to 2026-04-14T10:17:10 UTC (1776161830) [ 1.600977] wbec spi0.0: WBEC device added [ 1.608376] i2c i2c-1: using pinctrl states for GPIO recovery [ 1.614333] gpio-10 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 1.623213] i2c i2c-1: using generic GPIOs for recovery [ 1.634299] iio-rescale vin-volt: using raw+scale/offset source channel [ 1.641219] iio-rescale v33-volt: using raw+scale/offset source channel [ 1.648069] iio-rescale v50-volt: using raw+scale/offset source channel [ 1.654915] iio-rescale vbus-debug-volt: using raw+scale/offset source channel [ 1.660181] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 1.662358] iio-rescale vbus-network-volt: using raw+scale/offset source channel [ 1.678608] iio-rescale a1-volt: using raw+scale/offset source channel [ 1.685358] iio-rescale a2-volt: using raw+scale/offset source channel [ 1.692103] iio-rescale a3-volt: using raw+scale/offset source channel [ 1.698851] iio-rescale a4-volt: using raw+scale/offset source channel [ 1.706340] gpio-109 (sda): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 1.714390] mmc0: new HS200 MMC card at address 0001 [ 1.715723] axp20x-i2c 3-0034: AXP20x variant AXP221 found [ 1.720809] mmcblk0: mmc0:0001 MMC64G 58.2 GiB [ 1.726157] axp20x-adc axp22x-adc: DMA mask not set [ 1.732167] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 1.740090] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 1.740104] mmcblk0boot0: mmc0:0001 MMC64G 4.00 MiB [ 1.753903] mmcblk0boot1: mmc0:0001 MMC64G 4.00 MiB [ 1.759243] axp20x-i2c 3-0034: AXP20X driver loaded [ 1.759645] mmcblk0rpmb: mmc0:0001 MMC64G 4.00 MiB, chardev (241:0) [ 1.764185] i2c i2c-3: Not I2C compliant: can't read SCL [ 1.775695] i2c i2c-3: Bus may be unreliable [ 1.779965] i2c-gpio i2c_wbmz: using lines 109 (SDA) and 76 (SCL, no clock stretching) [ 1.787989] gpio-147 (sda): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 1.796961] gpio-128 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 1.806106] i2c-gpio i2c_atecc_rtc: using lines 147 (SDA) and 128 (SCL) [ 1.873608] mdio_bus gpio-0: ethernet-phy has invalid PHY address [ 1.879703] mdio_bus gpio-0: scan phy ethernet-phy at address 0 [ 1.945633] mdio_bus gpio-1: ethernet-phy has invalid PHY address [ 1.951735] mdio_bus gpio-1: scan phy ethernet-phy at address 0 [ 1.960407] sun4i-usb-phy 5100400.phy: phy0 dr_mode=3 [ 1.968082] ehci-platform 5101000.usb: EHCI Host Controller [ 1.968447] ehci-platform 5200000.usb: EHCI Host Controller [ 1.969072] ehci-platform 5310000.usb: EHCI Host Controller [ 1.969097] ehci-platform 5310000.usb: new USB bus registered, assigned bus number 1 [ 1.969262] ehci-platform 5310000.usb: irq 293, io mem 0x05310000 [ 1.969693] usb_phy_generic usb_phy_generic.1.auto: dummy supplies not allowed for exclusive requests [ 1.969933] ohci-platform 5101400.usb: Generic Platform OHCI controller [ 1.969957] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 2 [ 1.970096] ohci-platform 5101400.usb: irq 294, io mem 0x05101400 [ 1.970735] ohci-platform 5200400.usb: Generic Platform OHCI controller [ 1.970755] ohci-platform 5200400.usb: new USB bus registered, assigned bus number 3 [ 1.970834] ohci-platform 5200400.usb: irq 296, io mem 0x05200400 [ 1.972824] ohci-platform 5310400.usb: Generic Platform OHCI controller [ 1.972851] ohci-platform 5310400.usb: new USB bus registered, assigned bus number 4 [ 1.972957] ohci-platform 5310400.usb: irq 297, io mem 0x05310400 [ 1.972971] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 1.973531] of_cfs_init [ 1.973680] of_cfs_init: OK [ 1.973707] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 5 [ 1.973865] clk: Disabling unused clocks [ 1.974013] ALSA device list: [ 1.974021] No soundcards found. [ 1.974144] sunxi-mmc 4020000.mmc: Got CD GPIO [ 1.979284] ehci-platform 5200000.usb: new USB bus registered, assigned bus number 6 [ 1.981617] ehci-platform 5310000.usb: USB 2.0 started, EHCI 1.00 [ 1.982455] hub 1-0:1.0: USB hub found [ 1.982495] hub 1-0:1.0: 1 port detected [ 1.984961] ehci-platform 5101000.usb: irq 291, io mem 0x05101000 [ 1.992673] ehci-platform 5200000.usb: irq 292, io mem 0x05200000 [ 1.997801] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.017612] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00 [ 2.037602] ehci-platform 5200000.usb: USB 2.0 started, EHCI 1.00 [ 2.037854] hub 4-0:1.0: USB hub found [ 2.037876] hub 4-0:1.0: 1 port detected [ 2.038412] hub 3-0:1.0: USB hub found [ 2.038432] hub 3-0:1.0: 1 port detected [ 2.038976] hub 2-0:1.0: USB hub found [ 2.038996] hub 2-0:1.0: 1 port detected [ 2.043103] hub 5-0:1.0: USB hub found [ 2.047714] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.049183] mmc1: new ultra high speed SDR104 SDXC card at address 59b4 [ 2.055415] hub 5-0:1.0: 1 port detected [ 2.063670] mmcblk1: mmc1:59b4 USDU1 58.3 GiB [ 2.069856] hub 6-0:1.0: USB hub found [ 2.079642] mmcblk1: p1 [ 2.080392] hub 6-0:1.0: 1 port detected [ 2.228224] EXT4-fs (mmcblk0p2): mounted filesystem 3d61645f-2821-4f0c-a0f4-06375417e8c7 ro with ordered data mode. Quota mode: none. [ 2.240290] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.249237] devtmpfs: mounted [ 2.253538] Freeing unused kernel memory: 3264K [ 2.258160] Run /sbin/init as init process [ 2.465993] NET: Registered PF_INET6 protocol family [ 2.471747] Segment Routing with IPv6 [ 2.475445] In-situ OAM (IOAM) with IPv6 [ 2.485627] usb 6-1: new high-speed USB device number 2 using ehci-platform [ 2.504932] systemd[1]: systemd 247.3-7+deb11u7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 2.528468] systemd[1]: Detected architecture arm64. Welcome to Debian GNU/Linux 11 (bullseye)! [ 2.556173] systemd[1]: Set hostname to . [ 2.993673] systemd[1]: Queued start job for default target Graphical Interface. [ 5.389605] random: crng init done [ 5.410902] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.434658] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.458759] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.482839] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.507053] systemd[1]: Created slice system-wb\x2dcloud\x2dagent.slice. [ OK ] Created slice system-wb\x2dcloud\x2dagent.slice. [ 5.530705] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.554207] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.578271] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.602080] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.614040] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.638291] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.658206] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.681962] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.703665] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.730458] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 5.755753] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 5.778999] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.803245] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.831124] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.854966] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.905972] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 5.930033] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.985936] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.014726] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.034178] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 6.050004] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 6.110238] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.135177] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.152181] fuse: init (API version 7.39) [ 6.157866] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.172671] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.200176] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.211083] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.221302] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.234109] systemd[1]: Mounted Huge Pages File System. [ OK 6.240410] systemd[1]: Mounted POSIX Message Queue File System. 0m] Mounted 6.247885] systemd[1]: Mounted /sys/kernel/config. 1;39mHuge Pages [ 6.254101] systemd[1]: Mounted Kernel Debug File System. File System. [ OK [ 6.261658] systemd[1]: Finished Create list of static device nodes for the current kernel. ] Mounted POSIX Message Queue File System. [ OK ] Mounted /sys/kernel/config. [ OK ] Mounted Kernel Debug File System. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.315012] systemd[1]: modprobe@drm.service: Succeeded. [ 6.321172] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.342782] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.349362] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 6.370336] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ OK ] Mounted FUSE Control File System. [ OK ] Finished Apply Kernel Variables. [ 6.685845] EXT4-fs (mmcblk0p2): re-mounted 3d61645f-2821-4f0c-a0f4-06375417e8c7 r/w. Quota mode: none. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Coldplug All udev Devices. Starting Helper to synchronize boot up for ifupdown... Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Rule-based Manage…for Device Events and Files... [ OK ] Started Rule-based Manager for Device Events and Files. [ 7.517054] Driver for 1-wire Dallas network protocol. [ 7.654964] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 7.661359] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 7.667384] dwmac-sun8i 5020000.ethernet: No regulator found [ 7.673190] dwmac-sun8i 5020000.ethernet: PTP uses main clock [ 7.679023] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 0) [ 7.688538] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported [ 7.695808] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported [ 7.703052] dwmac-sun8i 5020000.ethernet: COE Type 2 [ 7.708059] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported [ 7.714890] dwmac-sun8i 5020000.ethernet: Normal descriptors [ 7.720601] dwmac-sun8i 5020000.ethernet: Chain mode enabled [ 7.737256] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ OK ] Found device[ 7.764629] dwmac-sun8i 5030000.ethernet: IRQ eth_wake_irq not found /dev/t[ 7.771746] dwmac-sun8i 5030000.ethernet: IRQ eth_lpi not found tyS0. [ 7.779086] dwmac-sun8i 5030000.ethernet: No regulator found [ 7.785789] dwmac-sun8i 5030000.ethernet: PTP uses main clock [ 7.791624] dwmac-sun8i 5030000.ethernet: Current syscon value is not the default 58000 (expect 0) [ 7.830576] dwmac-sun8i 5030000.ethernet: No HW DMA feature register supported [ 7.837851] dwmac-sun8i 5030000.ethernet: RX Checksum Offload Engine supported [ 7.845131] dwmac-sun8i 5030000.ethernet: COE Type 2 [ 7.850143] dwmac-sun8i 5030000.ethernet: TX Checksum insertion supported [ 7.856989] dwmac-sun8i 5030000.ethernet: Normal descriptors [ 7.862681] dwmac-sun8i 5030000.ethernet: Chain mode enabled [ OK ] Reached target Hardware activated USB gadget. [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/mmcblk0p6. [ 8.033854] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.058014] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.064481] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 8.087628] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... [ 8.151975] Bluetooth: Core ver 2.22 [ 8.155769] NET: Registered PF_BLUETOOTH protocol family [ 8.161129] Bluetooth: HCI device and connection manager initialized [ 8.167589] Bluetooth: HCI socket layer initialized [ 8.172550] Bluetooth: L2CAP socket layer initialized [ 8.177676] Bluetooth: SCO socket layer initialized [ 8.229937] RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e [ 8.237123] RTW: rtl8733bu BT-Coex version = COEX20230616-330e [ 8.243379] RTW: [HALMAC]138 [ 8.243379] HALMAC_MAJOR_VER = 1 [ 8.243379] HALMAC_PROTOTYPE_VER = 6 [ 8.243379] HALMAC_MINOR_VER = 6 [ 8.243379] HALMAC_PATCH_VER = 42 [ 8.313031] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. [ 8.639462] RTW: rtw_rfctl_decide_init_chplan chplan:0x7F [ 8.647836] RTW: rtw_set_country_cmd country_code:"KZ" [ 8.653043] RTW: default domain:0x5e applied, txpwr_lmt:?ETSI [ 8.658831] RTW: world wide applied, txpwr_lmt:WW Checking in pro[ 8.664946] RTW: rtw_ndev_init(wlan0) if1 mac_addr=c8:fe:0f:0b:1c:02 gress on 0 disks[ 8.672572] RTW: rtw_ndev_init(wlan1) if2 mac_addr=ca:fe:0f:0b:1c:02 (100.0% complet[ 8.680321] usbcore: registered new interface driver rtl8733bu [ 8.680877] usbcore: registered new interface driver btusb [ 8.692376] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723 [ 8.703927] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 8.710026] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin [ 8.718425] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin Startin[ 8.725694] Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507 g Load/Save RF Kill Switch Status... [ OK ] Started Load/Save RF Kill Switch Status. [FAILED] Failed to start File System Check on /dev/mmcblk0p6. See 'systemctl status systemd-fsck@dev-mmcblk0p6.service' for details. [DEPEND] Dependency failed for /mnt/data. [DEPEND] Dependency failed for /var/log. [DEPEND] Dependency failed for Flus…Journal to Persistent Storage. [DEPEND] Dependency failed for Local File Systems. [DEPEND] Dependency failed for Upda…MP about System Boot/Shutdown. [DEPEND] Dependency failed for Upda…about System Runlevel Changes. [ OK ] Stopped Dispatch Password …ts to Console Directory Watch. [ OK ] Stopped Forward Password R…uests to Wall Directory Watch. [ OK ] Reached target Timers. [ OK ] Reached target Bluetooth. [ 9.018504] Bluetooth: hci0: RTL: fw version 0xd9b80b4f [ OK ] Reached target Login Prompts. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target Sockets. [ OK ] Started Emergency Shell. [ OK ] Reached target Emergency Mode. Starting prepare mounts and symlinks to config files... [ OK ] Finished prepare mounts and symlinks to config files. Starting Raise network interfaces... Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. You are in emergency mode. After logging in, type "journalctl -xb" to view system logs, "systemGive root password for maintenance (or press Control-D to continue): [ 33.761721] dcdc4: disabling Reloading system manager configuration Starting default target You are in emergency mode. After logging in, type "journalctl -xb" to view systGive root password for maintenance (or press Control-D to continue): [ 50.753978] input input0: power key press detected [EC] Power off after power key long press detected. [EC] 5V line status: voltage present [EC] Power off and go to standby now- [EC] Starting up... [EC] Wiren Board Embedded Controller [EC] Firmware version: 1.3.2 [EC] Git info: 83d2110_HEAD [EC] Power on reason: Power button [EC] RTC time: 2026-04-14 10:18:13 [EC] Board temperature: 37.2?C [EC] Vin: 24.3V, USB Net: 0.2V, USB Console: 5.0V [EC] Turning on the main CPU; all future debug messages will originate from the CPU. U-Boot SPL 2024.01-g93c03f11a3 (May 23 2024 - 08:58:29 +0000) DRAM: 4096 MiB Trying to boot from MMC2 NOTICE: BL31: v2.10.0 (debug):v2.10.0+dfsg-1+wb1-1-g9db2f29f3 NOTICE: BL31: Built : 13:16:33, Feb 29 2024 NOTICE: BL31: Detected Allwinner H616 SoC (1823) NOTICE: BL31: Found U-Boot DTB at 0x4a07d108, model: Wiren Board 8.x INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for erratum 855873 was applied INFO: BL31: cortex_a53: CPU workaround for erratum 1530924 was applied INFO: PSCI: Suspend is unavailable INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 INFO: Changed devicetree. ns16550_serial serial@5000000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19 U-Boot 2024.01-g93c03f11a3 (May 23 2024 - 08:58:29 +0000) Allwinner Technology CPU: Allwinner H616 (SUN50I) Model: Wiren Board 8.x DRAM: 4 GiB Core: 68 devices, 19 uclasses, devicetree: separate WDT: Not starting watchdog@30090a0 MMC: mmc@4020000: 0, mmc@4022000: 1 Loading Environment from MMC... OK In: serial@5000000 Out: serial@5000000 Err: serial@5000000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 43 = 0x2B bootcount=0 mmcpart=2 upgrade_available=0 Environment size: 43/49148 bytes ## Resetting to default environment ## Info: input data size = 43 = 0x2B Net: No ethernet found. Hit to stop autoboot... (2 s) => setenv optargs ro rootwait fixrtc single init=/bin/sh => run bootcmd ## Info: input data size = 4329 = 0x10E9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 328 bytes read in 1 ms (320.3 KiB/s) Importing environment from 0x40080000... Checking if uenvcmd is set ... Running default loadzimage ... 9685285 bytes read in 2150 ms (4.3 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Working FDT set to 4fe00000 Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt allwinner/sun50i-h616-wirenboard843 49722 bytes read in 13 ms (3.6 MiB/s) Working FDT set to 4fa00000 254 bytes read in 1 ms (248 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Uncompressing Kernel Image Moving Image from 0x40080000 to 0x40200000, end=41970000 ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 Working FDT set to 4fa00000 Loading Device Tree to 0000000049fdd000, end 0000000049ffffff ... OK Working FDT set to 49fdd000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.8.0-wb140 (root@wbdevenv) (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Fri Jul 18 08:08:05 UTC 2025 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Wiren Board rev. 8.4.3 (T507) [ 0.000000] efi: UEFI not found. [ 0.000000] OF: reserved mem: 0x0000000040000000..0x000000004003ffff (256 KiB) nomap non-reusable secmon@40000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x13f7b19c0-0x13f7b3fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000004003ffff] [ 0.000000] node 0: [mem 0x0000000040040000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 22 pages/cpu s49768 r8192 d32152 u90112 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: console=ttyS0,115200 ro rootwait fixrtc single init=/bin/sh root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 [ 0.000000] Policy zone: Normal [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) [ 0.000000] Memory: 3990384K/4194304K available (13632K kernel code, 1454K rwdata, 4872K rodata, 3264K init, 542K bss, 171152K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000622] Console: colour dummy device 80x25 [ 0.000708] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000722] pid_max: default: 32768 minimum: 301 [ 0.000799] LSM: initializing lsm=capability,integrity [ 0.000910] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000933] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001979] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.002696] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.002928] rcu: Hierarchical SRCU implementation. [ 0.002932] rcu: Max phase no-delay instances is 1000. [ 0.003437] EFI services will not be available. [ 0.003676] smp: Bringing up secondary CPUs ... [ 0.004222] Detected VIPT I-cache on CPU1 [ 0.004305] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.004826] Detected VIPT I-cache on CPU2 [ 0.004874] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.005356] Detected VIPT I-cache on CPU3 [ 0.005402] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.005476] smp: Brought up 1 node, 4 CPUs [ 0.005484] SMP: Total of 4 processors activated. [ 0.005488] CPU: All CPU(s) started at EL2 [ 0.005512] CPU features: detected: 32-bit EL0 Support [ 0.005516] CPU features: detected: 32-bit EL1 Support [ 0.005521] CPU features: detected: CRC32 instructions [ 0.005562] alternatives: applying system-wide alternatives [ 0.008259] devtmpfs: initialized [ 0.017109] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.017133] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.018449] pinctrl core: initialized pinctrl subsystem [ 0.018892] DMI not present or invalid. [ 0.019639] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.020547] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.020676] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.020859] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.020891] audit: initializing netlink subsys (disabled) [ 0.021022] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 [ 0.021438] thermal_sys: Registered thermal governor 'step_wise' [ 0.021443] thermal_sys: Registered thermal governor 'power_allocator' [ 0.021484] cpuidle: using governor menu [ 0.021661] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.021741] ASID allocator initialised with 65536 entries [ 0.021930] Serial: AMBA PL011 UART driver [ 0.026684] platform 3001000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.030583] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/lcd-controller@6515000 [ 0.030600] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000 [ 0.030769] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/lcd-controller@6515000 [ 0.030833] platform 6515000.lcd-controller: Fixed dependency cycle(s) with /soc/tcon-top@6510000 [ 0.031086] platform 3001000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.031139] platform 7000000.rtc: Fixed dependency cycle(s) with /soc/clock@3001000 [ 0.031193] platform 7000000.rtc: Fixed dependency cycle(s) with /soc/clock@7010000 [ 0.031296] platform 7000000.rtc: Fixed dependency cycle(s) with /soc/clock@7010000 [ 0.031353] platform 7010000.clock: Fixed dependency cycle(s) with /soc/clock@3001000 [ 0.031410] platform 7010000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.036110] Modules: 26768 pages in range for non-PLT usage [ 0.036115] Modules: 518288 pages in range for PLT usage [ 0.036903] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.036909] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.036914] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.036918] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.036923] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.036927] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.036932] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.036936] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.038194] ACPI: Interpreter disabled. [ 0.038799] iommu: Default domain type: Translated [ 0.038804] iommu: DMA domain TLB invalidation policy: strict mode [ 0.039150] SCSI subsystem initialized [ 0.039513] usbcore: registered new interface driver usbfs [ 0.039540] usbcore: registered new interface driver hub [ 0.039573] usbcore: registered new device driver usb [ 0.039907] pps_core: LinuxPPS API ver. 1 registered [ 0.039911] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.039931] PTP clock support registered [ 0.039967] EDAC MC: Ver: 3.0.0 [ 0.040293] scmi_core: SCMI protocol bus registered [ 0.040597] FPGA manager framework [ 0.040683] Advanced Linux Sound Architecture Driver Initialized. [ 0.041722] clocksource: Switched to clocksource arch_sys_counter [ 0.041929] VFS: Disk quotas dquot_6.6.0 [ 0.041963] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.042141] pnp: PnP ACPI: disabled [ 0.048933] NET: Registered PF_INET protocol family [ 0.049152] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.052461] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.052512] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.052527] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.052782] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.054089] TCP: Hash tables configured (established 32768 bind 32768) [ 0.054197] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.054288] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.054472] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.054935] RPC: Registered named UNIX socket transport module. [ 0.054940] RPC: Registered udp transport module. [ 0.054943] RPC: Registered tcp transport module. [ 0.054946] RPC: Registered tcp-with-tls transport module. [ 0.054950] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.055395] kvm [1]: IPA Size Limit: 40 bits [ 0.056747] kvm [1]: vgic interrupt IRQ9 [ 0.056780] kvm [1]: Hyp mode initialized successfully [ 0.058044] Initialise system trusted keyrings [ 0.058206] workingset: timestamp_bits=42 max_order=20 bucket_order=0 [ 0.058508] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.058716] NFS: Registering the id_resolver key type [ 0.058736] Key type id_resolver registered [ 0.058740] Key type id_legacy registered [ 0.058763] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.058768] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.058881] 9p: Installing v9fs 9p2000 file system support [ 0.122072] Key type asymmetric registered [ 0.122077] Asymmetric key parser 'x509' registered [ 0.122120] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.122127] io scheduler mq-deadline registered [ 0.122132] io scheduler kyber registered [ 0.122164] io scheduler bfq registered [ 0.125500] EINJ: ACPI disabled. [ 0.135297] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled [ 0.143493] loop: module loaded [ 0.147854] tun: Universal TUN/TAP device driver, 1.6 [ 0.149239] VFIO - User Level meta-driver version: 0.3 [ 0.150632] usbcore: registered new interface driver usb-storage [ 0.150702] usbcore: registered new interface driver usbserial_generic [ 0.150724] usbserial: USB Serial support registered for generic [ 0.150750] usbcore: registered new interface driver ch341 [ 0.150769] usbserial: USB Serial support registered for ch341-uart [ 0.153577] sun6i-rtc 7000000.rtc: registered as rtc1 [ 0.154003] i2c_dev: i2c /dev entries driver [ 0.154253] mv64xxx_i2c 7081400.i2c: can't get pinctrl, bus recovery not supported [ 0.154906] axp20x-i2c 0-0036: AXP20x variant AXP15060 found [ 0.155150] axp20x-i2c 0-0036: AXP20X driver loaded [ 0.158047] sdhci: Secure Digital Host Controller Interface driver [ 0.158051] sdhci: Copyright(c) Pierre Ossman [ 0.158402] Synopsys Designware Multimedia Card Interface Driver [ 0.159167] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.160220] ledtrig-cpu: registered to indicate activity on CPUs [ 0.160661] SMCCC: SOC_ID: ID = jep106:091e:1823 Revision = 0x00000002 [ 0.161072] usbcore: registered new interface driver usbhid [ 0.161076] usbhid: USB HID core driver [ 0.162586] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.164990] usbcore: registered new interface driver snd-usb-audio [ 0.165561] NET: Registered PF_PACKET protocol family [ 0.165566] can: controller area network core [ 0.165613] NET: Registered PF_CAN protocol family [ 0.165901] 9pnet: Installing 9P2000 support [ 0.165964] Key type dns_resolver registered [ 0.175070] registered taskstats version 1 [ 0.175270] Loading compiled-in X.509 certificates [ 0.193299] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000 [ 0.193378] platform 1100000.mixer: Fixed dependency cycle(s) with /soc/tcon-top@6510000 [ 0.194832] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.202615] sun50i-h616-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 0.203298] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.203556] sun50i-h616-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver [ 0.204294] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator [ 0.204756] printk: legacy console [ttyS0] disabled [ 0.225335] dw-apb-uart 5000000.serial: detected caps 00000100 should be 00040100 [ 0.225345] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 284, base_baud = 1500000) is a 16550A [ 0.225385] printk: legacy console [ttyS0] enabled [ 1.492986] dw-apb-uart 5000400.serial: detected caps 00000100 should be 00040100 [ 1.500489] 5000400.serial: ttyS1 at MMIO 0x5000400 (irq = 285, base_baud = 1500000) is a 16550A [ 1.530563] dw-apb-uart 5000800.serial: detected caps 00000100 should be 00040100 [ 1.538050] 5000800.serial: ttyS2 at MMIO 0x5000800 (irq = 286, base_baud = 1500000) is a 16550A [ 1.547536] sun6i-spi 5011000.spi: Failed to request TX DMA channel [ 1.553811] sun6i-spi 5011000.spi: Failed to request RX DMA channel [ 1.560747] wbec spi0.0: WBEC not found with v2 protocol, trying v1 [ 1.567133] wbec spi0.0: WBEC found with v1 protocol [ 1.573192] input: wbec pwrkey as /devices/platform/soc/5011000.spi/spi_master/spi0/spi0.0/5011000.spi:wbec@0:wbec-pwrkey@0/input/input0 [ 1.586781] wbec-rtc 5011000.spi:wbec@0:wbec-rtc@0: registered as rtc0 [ 1.593463] wbec-rtc 5011000.spi:wbec@0:wbec-rtc@0: setting system clock to 2026-04-14T10:18:43 UTC (1776161923) [ 1.605832] wbec spi0.0: WBEC device added [ 1.613365] i2c i2c-1: using pinctrl states for GPIO recovery [ 1.619313] gpio-10 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 1.628199] i2c i2c-1: using generic GPIOs for recovery [ 1.639422] iio-rescale vin-volt: using raw+scale/offset source channel [ 1.646352] iio-rescale v33-volt: using raw+scale/offset source channel [ 1.653211] iio-rescale v50-volt: using raw+scale/offset source channel [ 1.660057] iio-rescale vbus-debug-volt: using raw+scale/offset source channel [ 1.665218] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 1.667510] iio-rescale vbus-network-volt: using raw+scale/offset source channel [ 1.683762] iio-rescale a1-volt: using raw+scale/offset source channel [ 1.690528] iio-rescale a2-volt: using raw+scale/offset source channel [ 1.697283] iio-rescale a3-volt: using raw+scale/offset source channel [ 1.704041] iio-rescale a4-volt: using raw+scale/offset source channel [ 1.711398] gpio-109 (sda): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 1.715899] mmc0: new HS200 MMC card at address 0001 [ 1.720797] axp20x-i2c 3-0034: AXP20x variant AXP221 found [ 1.725847] mmcblk0: mmc0:0001 MMC64G 58.2 GiB [ 1.731325] axp20x-adc axp22x-adc: DMA mask not set [ 1.737214] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 1.745174] mmcblk0boot0: mmc0:0001 MMC64G 4.00 MiB [ 1.745206] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 1.751147] mmcblk0boot1: mmc0:0001 MMC64G 4.00 MiB [ 1.763635] mmcblk0rpmb: mmc0:0001 MMC64G 4.00 MiB, chardev (241:0) [ 1.769226] axp20x-i2c 3-0034: AXP20X driver loaded [ 1.774839] i2c i2c-3: Not I2C compliant: can't read SCL [ 1.780158] i2c i2c-3: Bus may be unreliable [ 1.784429] i2c-gpio i2c_wbmz: using lines 109 (SDA) and 76 (SCL, no clock stretching) [ 1.792462] gpio-147 (sda): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 1.801436] gpio-128 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 1.810588] i2c-gpio i2c_atecc_rtc: using lines 147 (SDA) and 128 (SCL) [ 1.877732] mdio_bus gpio-0: ethernet-phy has invalid PHY address [ 1.883828] mdio_bus gpio-0: scan phy ethernet-phy at address 0 [ 1.949815] mdio_bus gpio-1: ethernet-phy has invalid PHY address [ 1.955929] mdio_bus gpio-1: scan phy ethernet-phy at address 0 [ 1.965161] sun4i-usb-phy 5100400.phy: phy0 dr_mode=3 [ 1.972520] ehci-platform 5101000.usb: EHCI Host Controller [ 1.972819] ehci-platform 5200000.usb: EHCI Host Controller [ 1.973183] ehci-platform 5310000.usb: EHCI Host Controller [ 1.973204] ehci-platform 5310000.usb: new USB bus registered, assigned bus number 1 [ 1.973319] ehci-platform 5310000.usb: irq 293, io mem 0x05310000 [ 1.973946] usb_phy_generic usb_phy_generic.1.auto: dummy supplies not allowed for exclusive requests [ 1.974005] ohci-platform 5101400.usb: Generic Platform OHCI controller [ 1.974022] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 2 [ 1.974114] ohci-platform 5101400.usb: irq 294, io mem 0x05101400 [ 1.974619] ohci-platform 5200400.usb: Generic Platform OHCI controller [ 1.974634] ohci-platform 5200400.usb: new USB bus registered, assigned bus number 3 [ 1.974704] ohci-platform 5200400.usb: irq 296, io mem 0x05200400 [ 1.975582] ohci-platform 5310400.usb: Generic Platform OHCI controller [ 1.975598] ohci-platform 5310400.usb: new USB bus registered, assigned bus number 4 [ 1.975667] ohci-platform 5310400.usb: irq 297, io mem 0x05310400 [ 1.976666] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 1.977035] of_cfs_init [ 1.977131] of_cfs_init: OK [ 1.977285] clk: Disabling unused clocks [ 1.977412] ALSA device list: [ 1.977418] No soundcards found. [ 1.978147] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 5 [ 1.983732] ehci-platform 5200000.usb: new USB bus registered, assigned bus number 6 [ 1.989419] ehci-platform 5101000.usb: irq 291, io mem 0x05101000 [ 1.989749] ehci-platform 5310000.usb: USB 2.0 started, EHCI 1.00 [ 1.997107] ehci-platform 5200000.usb: irq 292, io mem 0x05200000 [ 2.003592] hub 1-0:1.0: USB hub found [ 2.004335] sunxi-mmc 4020000.mmc: Got CD GPIO [ 2.018970] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00 [ 2.026744] hub 1-0:1.0: 1 port detected [ 2.033745] ehci-platform 5200000.usb: USB 2.0 started, EHCI 1.00 [ 2.037760] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.040142] hub 5-0:1.0: USB hub found [ 2.168644] hub 5-0:1.0: 1 port detected [ 2.173210] hub 4-0:1.0: USB hub found [ 2.176978] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.184990] hub 4-0:1.0: 1 port detected [ 2.186465] mmc1: new ultra high speed SDR104 SDXC card at address 59b4 [ 2.189548] hub 3-0:1.0: USB hub found [ 2.196087] mmcblk1: mmc1:59b4 USDU1 58.3 GiB [ 2.199293] hub 3-0:1.0: 1 port detected [ 2.205343] mmcblk1: p1 [ 2.208175] hub 2-0:1.0: USB hub found [ 2.213853] hub 2-0:1.0: 1 port detected [ 2.218386] hub 6-0:1.0: USB hub found [ 2.222164] hub 6-0:1.0: 1 port detected [ 2.233669] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 2.240996] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 2.328486] EXT4-fs (mmcblk0p2): recovery complete [ 2.334097] EXT4-fs (mmcblk0p2): mounted filesystem 3d61645f-2821-4f0c-a0f4-06375417e8c7 ro with ordered data mode. Quota mode: none. [ 2.346188] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.353415] devtmpfs: mounted [ 2.357764] Freeing unused kernel memory: 3264K [ 2.362406] Run /bin/sh as init process /bin/sh: 0: can't access tty; job control turned off # [ 2.485890] usb 6-1: new high-speed USB device number 2 using ehci-platform mount -n -o remount,rw /dev/mmcblk0p2 / [ 11.346554] EXT4-fs (mmcblk0p2): re-mounted 3d61645f-2821-4f0c-a0f4-06375417e8c7 r/w. Quota mode: none. # mount /dev/mmcblk0p6 /mnt/data [ 20.865059] EXT4-fs (mmcblk0p6): warning: mounting fs with errors, running e2fsck is recommended [ 20.875880] EXT4-fs (mmcblk0p6): mounted filesystem b7c2b1dc-f7a3-4fd1-a405-cc4cbf963fe0 r/w with ordered data mode. Quota mode: none. # [ 33.761852] dcdc4: disabling e2fsck -f -y /dev/mmcblk0p2 e2fsck 1.46.2 (28-Feb-2021) ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /dev/mmcblk0p2 is mounted. e2fsck: Device or resource busy while trying to open /dev/mmcblk0p2 Filesystem mounted or opened exclusively by another program? # sync # [EC] Watchdog is timed out, reset power. U-Boot SPL 2024.01-g93c03f11a3 (May 23 2024 - 08:58:29 +0000) DRAM: 4096 MiB Trying to boot from MMC2 NOTICE: BL31: v2.10.0 (debug):v2.10.0+dfsg-1+wb1-1-g9db2f29f3 NOTICE: BL31: Built : 13:16:33, Feb 29 2024 NOTICE: BL31: Detected Allwinner H616 SoC (1823) NOTICE: BL31: Found U-Boot DTB at 0x4a07d108, model: Wiren Board 8.x INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for erratum 855873 was applied INFO: BL31: cortex_a53: CPU workaround for erratum 1530924 was applied INFO: PSCI: Suspend is unavailable INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 INFO: Changed devicetree. ns16550_serial serial@5000000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19 U-Boot 2024.01-g93c03f11a3 (May 23 2024 - 08:58:29 +0000) Allwinner Technology CPU: Allwinner H616 (SUN50I) Model: Wiren Board 8.x DRAM: 4 GiB Core: 68 devices, 19 uclasses, devicetree: separate WDT: Not starting watchdog@30090a0 MMC: mmc@4020000: 0, mmc@4022000: 1 Loading Environment from MMC... OK In: serial@5000000 Out: serial@5000000 Err: serial@5000000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 43 = 0x2B bootcount=0 mmcpart=2 upgrade_available=0 Environment size: 43/49148 bytes ## Resetting to default environment ## Info: input data size = 43 = 0x2B Net: No ethernet found. Hit to stop autoboot... (2 s) ## Info: input data size = 4329 = 0x10E9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 328 bytes read in 1 ms (320.3 KiB/s) Importing environment from 0x40080000... Checking if uenvcmd is set ... Running default loadzimage ... 9685285 bytes read in 2146 ms (4.3 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Working FDT set to 4fe00000 Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt allwinner/sun50i-h616-wirenboard843 49722 bytes read in 13 ms (3.6 MiB/s) Working FDT set to 4fa00000 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Uncompressing Kernel Image Moving Image from 0x40080000 to 0x40200000, end=41970000 ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 Working FDT set to 4fa00000 Loading Device Tree to 0000000049fdd000, end 0000000049ffffff ... OK Working FDT set to 49fdd000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.8.0-wb140 (root@wbdevenv) (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Fri Jul 18 08:08:05 UTC 2025 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Wiren Board rev. 8.4.3 (T507) [ 0.000000] efi: UEFI not found. [ 0.000000] OF: reserved mem: 0x0000000040000000..0x000000004003ffff (256 KiB) nomap non-reusable secmon@40000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x13f7b19c0-0x13f7b3fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000004003ffff] [ 0.000000] node 0: [mem 0x0000000040040000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 22 pages/cpu s49768 r8192 d32152 u90112 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 [ 0.000000] Policy zone: Normal [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) [ 0.000000] Memory: 3990384K/4194304K available (13632K kernel code, 1454K rwdata, 4872K rodata, 3264K init, 542K bss, 171152K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000605] Console: colour dummy device 80x25 [ 0.000693] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000707] pid_max: default: 32768 minimum: 301 [ 0.000784] LSM: initializing lsm=capability,integrity [ 0.000894] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000917] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001969] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.002681] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.002909] rcu: Hierarchical SRCU implementation. [ 0.002912] rcu: Max phase no-delay instances is 1000. [ 0.003400] EFI services will not be available. [ 0.003638] smp: Bringing up secondary CPUs ... [ 0.004189] Detected VIPT I-cache on CPU1 [ 0.004268] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.004793] Detected VIPT I-cache on CPU2 [ 0.004840] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.005320] Detected VIPT I-cache on CPU3 [ 0.005364] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.005438] smp: Brought up 1 node, 4 CPUs [ 0.005445] SMP: Total of 4 processors activated. [ 0.005448] CPU: All CPU(s) started at EL2 [ 0.005473] CPU features: detected: 32-bit EL0 Support [ 0.005476] CPU features: detected: 32-bit EL1 Support [ 0.005481] CPU features: detected: CRC32 instructions [ 0.005522] alternatives: applying system-wide alternatives [ 0.008220] devtmpfs: initialized [ 0.016972] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.016997] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.018316] pinctrl core: initialized pinctrl subsystem [ 0.018758] DMI not present or invalid. [ 0.019503] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.020363] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.020493] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.020675] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.020708] audit: initializing netlink subsys (disabled) [ 0.020840] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 [ 0.021259] thermal_sys: Registered thermal governor 'step_wise' [ 0.021264] thermal_sys: Registered thermal governor 'power_allocator' [ 0.021304] cpuidle: using governor menu [ 0.021444] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.021523] ASID allocator initialised with 65536 entries [ 0.021710] Serial: AMBA PL011 UART driver [ 0.026438] platform 3001000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.030320] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/lcd-controller@6515000 [ 0.030338] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000 [ 0.030506] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/lcd-controller@6515000 [ 0.030570] platform 6515000.lcd-controller: Fixed dependency cycle(s) with /soc/tcon-top@6510000 [ 0.030821] platform 3001000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.030873] platform 7000000.rtc: Fixed dependency cycle(s) with /soc/clock@3001000 [ 0.030926] platform 7000000.rtc: Fixed dependency cycle(s) with /soc/clock@7010000 [ 0.031026] platform 7000000.rtc: Fixed dependency cycle(s) with /soc/clock@7010000 [ 0.031083] platform 7010000.clock: Fixed dependency cycle(s) with /soc/clock@3001000 [ 0.031140] platform 7010000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.035778] Modules: 26768 pages in range for non-PLT usage [ 0.035784] Modules: 518288 pages in range for PLT usage [ 0.036586] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.036592] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.036597] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.036601] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.036606] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.036610] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.036615] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.036618] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.037872] ACPI: Interpreter disabled. [ 0.038456] iommu: Default domain type: Translated [ 0.038461] iommu: DMA domain TLB invalidation policy: strict mode [ 0.038810] SCSI subsystem initialized [ 0.039173] usbcore: registered new interface driver usbfs [ 0.039199] usbcore: registered new interface driver hub [ 0.039233] usbcore: registered new device driver usb [ 0.039560] pps_core: LinuxPPS API ver. 1 registered [ 0.039564] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.039583] PTP clock support registered [ 0.039619] EDAC MC: Ver: 3.0.0 [ 0.039923] scmi_core: SCMI protocol bus registered [ 0.040248] FPGA manager framework [ 0.040334] Advanced Linux Sound Architecture Driver Initialized. [ 0.041336] clocksource: Switched to clocksource arch_sys_counter [ 0.041553] VFS: Disk quotas dquot_6.6.0 [ 0.041588] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.041764] pnp: PnP ACPI: disabled [ 0.048526] NET: Registered PF_INET protocol family [ 0.048746] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.052056] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.052106] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.052120] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.052377] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.053699] TCP: Hash tables configured (established 32768 bind 32768) [ 0.053806] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.053897] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.054080] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.054573] RPC: Registered named UNIX socket transport module. [ 0.054578] RPC: Registered udp transport module. [ 0.054582] RPC: Registered tcp transport module. [ 0.054584] RPC: Registered tcp-with-tls transport module. [ 0.054587] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.055033] kvm [1]: IPA Size Limit: 40 bits [ 0.056380] kvm [1]: vgic interrupt IRQ9 [ 0.056412] kvm [1]: Hyp mode initialized successfully [ 0.057670] Initialise system trusted keyrings [ 0.057822] workingset: timestamp_bits=42 max_order=20 bucket_order=0 [ 0.058128] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.058333] NFS: Registering the id_resolver key type [ 0.058353] Key type id_resolver registered [ 0.058357] Key type id_legacy registered [ 0.058379] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.058385] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.058498] 9p: Installing v9fs 9p2000 file system support [ 0.121948] Key type asymmetric registered [ 0.121953] Asymmetric key parser 'x509' registered [ 0.121997] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.122003] io scheduler mq-deadline registered [ 0.122008] io scheduler kyber registered [ 0.122040] io scheduler bfq registered [ 0.125300] EINJ: ACPI disabled. [ 0.135052] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled [ 0.143168] loop: module loaded [ 0.147455] tun: Universal TUN/TAP device driver, 1.6 [ 0.148780] VFIO - User Level meta-driver version: 0.3 [ 0.150097] usbcore: registered new interface driver usb-storage [ 0.150167] usbcore: registered new interface driver usbserial_generic [ 0.150189] usbserial: USB Serial support registered for generic [ 0.150211] usbcore: registered new interface driver ch341 [ 0.150235] usbserial: USB Serial support registered for ch341-uart [ 0.152948] sun6i-rtc 7000000.rtc: registered as rtc1 [ 0.153355] i2c_dev: i2c /dev entries driver [ 0.153602] mv64xxx_i2c 7081400.i2c: can't get pinctrl, bus recovery not supported [ 0.154250] axp20x-i2c 0-0036: AXP20x variant AXP15060 found [ 0.154494] axp20x-i2c 0-0036: AXP20X driver loaded [ 0.157294] sdhci: Secure Digital Host Controller Interface driver [ 0.157298] sdhci: Copyright(c) Pierre Ossman [ 0.157671] Synopsys Designware Multimedia Card Interface Driver [ 0.158391] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.159414] ledtrig-cpu: registered to indicate activity on CPUs [ 0.159844] SMCCC: SOC_ID: ID = jep106:091e:1823 Revision = 0x00000002 [ 0.160259] usbcore: registered new interface driver usbhid [ 0.160264] usbhid: USB HID core driver [ 0.161736] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.164029] usbcore: registered new interface driver snd-usb-audio [ 0.164589] NET: Registered PF_PACKET protocol family [ 0.164595] can: controller area network core [ 0.164644] NET: Registered PF_CAN protocol family [ 0.164900] 9pnet: Installing 9P2000 support [ 0.164992] Key type dns_resolver registered [ 0.174153] registered taskstats version 1 [ 0.174323] Loading compiled-in X.509 certificates [ 0.192369] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000 [ 0.192447] platform 1100000.mixer: Fixed dependency cycle(s) with /soc/tcon-top@6510000 [ 0.193878] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.201682] sun50i-h616-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 0.202337] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.202583] sun50i-h616-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver [ 0.203288] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator [ 0.203761] printk: legacy console [ttyS0] disabled [ 0.224353] dw-apb-uart 5000000.serial: detected caps 00000100 should be 00040100 [ 0.224364] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 284, base_baud = 1500000) is a 16550A [ 0.224404] printk: legacy console [ttyS0] enabled [ 1.488610] dw-apb-uart 5000400.serial: detected caps 00000100 should be 00040100 [ 1.496096] 5000400.serial: ttyS1 at MMIO 0x5000400 (irq = 285, base_baud = 1500000) is a 16550A [ 1.526123] dw-apb-uart 5000800.serial: detected caps 00000100 should be 00040100 [ 1.533609] 5000800.serial: ttyS2 at MMIO 0x5000800 (irq = 286, base_baud = 1500000) is a 16550A [ 1.543104] sun6i-spi 5011000.spi: Failed to request TX DMA channel [ 1.549383] sun6i-spi 5011000.spi: Failed to request RX DMA channel [ 1.556380] wbec spi0.0: WBEC not found with v2 protocol, trying v1 [ 1.562762] wbec spi0.0: WBEC found with v1 protocol [ 1.568793] input: wbec pwrkey as /devices/platform/soc/5011000.spi/spi_master/spi0/spi0.0/5011000.spi:wbec@0:wbec-pwrkey@0/input/input0 [ 1.582399] wbec-rtc 5011000.spi:wbec@0:wbec-rtc@0: registered as rtc0 [ 1.589078] wbec-rtc 5011000.spi:wbec@0:wbec-rtc@0: setting system clock to 2026-04-14T10:20:26 UTC (1776162026) [ 1.601426] wbec spi0.0: WBEC device added [ 1.608795] i2c i2c-1: using pinctrl states for GPIO recovery [ 1.614728] gpio-10 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 1.623612] i2c i2c-1: using generic GPIOs for recovery [ 1.634815] iio-rescale vin-volt: using raw+scale/offset source channel [ 1.641724] iio-rescale v33-volt: using raw+scale/offset source channel [ 1.648567] iio-rescale v50-volt: using raw+scale/offset source channel [ 1.655400] iio-rescale vbus-debug-volt: using raw+scale/offset source channel [ 1.660623] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 1.662842] iio-rescale vbus-network-volt: using raw+scale/offset source channel [ 1.679092] iio-rescale a1-volt: using raw+scale/offset source channel [ 1.685841] iio-rescale a2-volt: using raw+scale/offset source channel [ 1.692586] iio-rescale a3-volt: using raw+scale/offset source channel [ 1.699340] iio-rescale a4-volt: using raw+scale/offset source channel [ 1.706712] gpio-109 (sda): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 1.716101] axp20x-i2c 3-0034: AXP20x variant AXP221 found [ 1.722011] axp20x-adc axp22x-adc: DMA mask not set [ 1.730304] mmc0: new HS200 MMC card at address 0001 [ 1.731733] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 1.735842] mmcblk0: mmc0:0001 MMC64G 58.2 GiB [ 1.754415] axp20x-i2c 3-0034: AXP20X driver loaded [ 1.759353] i2c i2c-3: Not I2C compliant: can't read SCL [ 1.764666] i2c i2c-3: Bus may be unreliable [ 1.768941] i2c-gpio i2c_wbmz: using lines 109 (SDA) and 76 (SCL, no clock stretching) [ 1.776964] gpio-147 (sda): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 1.785942] gpio-128 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 1.795115] i2c-gpio i2c_atecc_rtc: using lines 147 (SDA) and 128 (SCL) [ 1.795856] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 1.806812] mmcblk0boot0: mmc0:0001 MMC64G 4.00 MiB [ 1.812792] mmcblk0boot1: mmc0:0001 MMC64G 4.00 MiB [ 1.818552] mmcblk0rpmb: mmc0:0001 MMC64G 4.00 MiB, chardev (241:0) [ 1.861346] mdio_bus gpio-0: ethernet-phy has invalid PHY address [ 1.867442] mdio_bus gpio-0: scan phy ethernet-phy at address 0 [ 1.933364] mdio_bus gpio-1: ethernet-phy has invalid PHY address [ 1.939466] mdio_bus gpio-1: scan phy ethernet-phy at address 0 [ 1.948188] sun4i-usb-phy 5100400.phy: phy0 dr_mode=3 [ 1.955858] ehci-platform 5101000.usb: EHCI Host Controller [ 1.956232] ehci-platform 5200000.usb: EHCI Host Controller [ 1.956719] ehci-platform 5310000.usb: EHCI Host Controller [ 1.956745] ehci-platform 5310000.usb: new USB bus registered, assigned bus number 1 [ 1.956912] ehci-platform 5310000.usb: irq 293, io mem 0x05310000 [ 1.957531] usb_phy_generic usb_phy_generic.1.auto: dummy supplies not allowed for exclusive requests [ 1.957701] ohci-platform 5101400.usb: Generic Platform OHCI controller [ 1.957723] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 2 [ 1.957829] ohci-platform 5101400.usb: irq 294, io mem 0x05101400 [ 1.958428] ohci-platform 5200400.usb: Generic Platform OHCI controller [ 1.958448] ohci-platform 5200400.usb: new USB bus registered, assigned bus number 3 [ 1.958526] ohci-platform 5200400.usb: irq 296, io mem 0x05200400 [ 1.959489] ohci-platform 5310400.usb: Generic Platform OHCI controller [ 1.959509] ohci-platform 5310400.usb: new USB bus registered, assigned bus number 4 [ 1.959592] ohci-platform 5310400.usb: irq 297, io mem 0x05310400 [ 1.960757] of_cfs_init [ 1.960849] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 1.960851] of_cfs_init: OK [ 1.961041] clk: Disabling unused clocks [ 1.961189] ALSA device list: [ 1.961196] No soundcards found. [ 1.961518] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 5 [ 1.962075] sunxi-mmc 4020000.mmc: Got CD GPIO [ 1.967061] ehci-platform 5200000.usb: new USB bus registered, assigned bus number 6 [ 1.972661] ehci-platform 5310000.usb: USB 2.0 started, EHCI 1.00 [ 1.972734] ehci-platform 5101000.usb: irq 291, io mem 0x05101000 [ 1.980452] ehci-platform 5200000.usb: irq 292, io mem 0x05200000 [ 1.985344] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00 [ 1.986276] hub 5-0:1.0: USB hub found [ 1.986327] hub 5-0:1.0: 1 port detected [ 1.987478] hub 1-0:1.0: USB hub found [ 1.993137] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.009338] ehci-platform 5200000.usb: USB 2.0 started, EHCI 1.00 [ 2.010071] hub 1-0:1.0: 1 port detected [ 2.156477] hub 6-0:1.0: USB hub found [ 2.160255] hub 6-0:1.0: 1 port detected [ 2.164785] hub 2-0:1.0: USB hub found [ 2.168568] hub 2-0:1.0: 1 port detected [ 2.173083] hub 3-0:1.0: USB hub found [ 2.176870] hub 3-0:1.0: 1 port detected [ 2.178104] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.181385] hub 4-0:1.0: USB hub found [ 2.190261] mmc1: new ultra high speed SDR104 SDXC card at address 59b4 [ 2.192560] hub 4-0:1.0: 1 port detected [ 2.199719] mmcblk1: mmc1:59b4 USDU1 58.3 GiB [ 2.209152] mmcblk1: p1 [ 2.219221] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 2.226538] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 2.313361] EXT4-fs (mmcblk0p2): recovery complete [ 2.318859] EXT4-fs (mmcblk0p2): mounted filesystem 3d61645f-2821-4f0c-a0f4-06375417e8c7 ro with ordered data mode. Quota mode: none. [ 2.330936] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.338160] devtmpfs: mounted [ 2.342489] Freeing unused kernel memory: 3264K [ 2.347112] Run /sbin/init as init process [ 2.417427] usb 6-1: new high-speed USB device number 2 using ehci-platform [ 2.562865] NET: Registered PF_INET6 protocol family [ 2.568909] Segment Routing with IPv6 [ 2.572608] In-situ OAM (IOAM) with IPv6 [ 2.601409] systemd[1]: systemd 247.3-7+deb11u7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 2.624809] systemd[1]: Detected architecture arm64. Welcome to Debian GNU/Linux 11 (bullseye)! [ 2.651717] systemd[1]: Set hostname to . [ 3.109387] systemd[1]: Queued start job for default target Graphical Interface. [ 5.521343] random: crng init done [ 5.542636] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.566258] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.590505] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.614498] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.638140] systemd[1]: Created slice system-wb\x2dcloud\x2dagent.slice. [ OK ] Created slice system-wb\x2dcloud\x2dagent.slice. [ 5.662439] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.685770] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.709774] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.733863] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.745866] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.769885] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.789711] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.809689] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.831554] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.858244] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 5.883499] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 5.906719] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.931032] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.958910] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.982684] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.029622] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 6.053589] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.083064] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.107519] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.130339] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 6.169946] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 6.203816] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.230696] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.247263] fuse: init (API version 7.39) [ 6.252920] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.266480] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.330086] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.341230] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules 6.350787] systemd[1]: Starting Coldplug All udev Devices... 0m... Starting Coldplug All udev Devices... [ 6.363290] systemd[1]: Mounted Huge Pages File System. [ OK ] Mounted 6.370759] systemd[1]: Mounted POSIX Message Queue File System. 1;39mHuge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ 6.406467] systemd[1]: Mounted /sys/kernel/config. [ OK ] Mounted /sys/kernel/config. [ 6.430163] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 6.450706] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.478702] systemd[1]: modprobe@drm.service: Succeeded. [ 6.484818] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.505907] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ OK ] Mounted FUSE Control File System. [ OK ] Finished Apply Kernel Variables. [ 6.722479] EXT4-fs (mmcblk0p2): re-mounted 3d61645f-2821-4f0c-a0f4-06375417e8c7 r/w. Quota mode: none. [ OK ] Finished Remount Root and Kernel File Systems. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create System Users. Starting Helper to synchronize boot up for ifupdown... Starting Create Static Device Nodes in /dev... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Rule-based Manage…for Device Events and Files... [ OK ] Started Rule-based Manager for Device Events and Files. [ 7.584857] Driver for 1-wire Dallas network protocol. [ 7.605667] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 7.680885] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 7.687297] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 7.693357] dwmac-sun8i 5020000.ethernet: No regulator found [ 7.699190] dwmac-sun8i 5020000.ethernet: PTP uses main clock [ 7.705000] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 0) [ 7.714373] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported [ 7.721662] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported [ 7.728959] dwmac-sun8i 5020000.ethernet: COE Type 2 [ 7.733980] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported [ 7.740816] dwmac-sun8i 5020000.ethernet: Normal descriptors [ 7.746524] dwmac-sun8i 5020000.ethernet: Chain mode enabled [ OK ] Found device /dev/ttyS0. [ OK ] Reached target Hardware activated USB gadget. [ OK ] Found device /dev/mmcblk0p5. Activating swap /dev/mmcblk0p5... [ OK 8.000022] dwmac-sun8i 5030000.ethernet: IRQ eth_wake_irq not found 0m] Found device[ 8.007730] dwmac-sun8i 5030000.ethernet: IRQ eth_lpi not found /dev/m[ 8.015095] dwmac-sun8i 5030000.ethernet: No regulator found mcblk0p6. [ 8.022184] dwmac-sun8i 5030000.ethernet: PTP uses main clock [ 8.028318] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.029091] dwmac-sun8i 5030000.ethernet: Current syscon value is not the default 58000 (expect 0) [ 8.046328] dwmac-sun8i 5030000.ethernet: No HW DMA feature register supported [ 8.053637] dwmac-sun8i 5030000.ethernet: RX Checksum Offload Engine supported [ 8.058357] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ 8.060918] dwmac-sun8i 5030000.ethernet: COE Type 2 [ 8.070488] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.074452] dwmac-sun8i 5030000.ethernet: TX Checksum insertion supported [ 8.074458] dwmac-sun8i 5030000.ethernet: Normal descriptors [ 8.074462] dwmac-sun8i 5030000.ethernet: Chain mode enabled [ 8.100223] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 8.112502] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid Starting File System Check on /dev/mmcblk0p6... [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ 8.241769] Bluetooth: Core ver 2.22 [ 8.245565] NET: Registered PF_BLUETOOTH protocol family [ 8.250933] Bluetooth: HCI device and connection manager initialized [ 8.257371] Bluetooth: HCI socket layer initialized [ 8.259293] RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e [ 8.262368] Bluetooth: L2CAP socket layer initialized [ 8.269490] RTW: rtl8733bu BT-Coex version = COEX20230616-330e [ 8.274647] Bluetooth: SCO socket layer initialized [ 8.280850] RTW: [HALMAC]138 [ 8.280850] HALMAC_MAJOR_VER = 1 [ 8.280850] HALMAC_PROTOTYPE_VER = 6 [ 8.280850] HALMAC_MINOR_VER = 6 [ 8.280850] HALMAC_PATCH_VER = 42 [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. [FAILED] Failed to start File System Check on /dev/mmcblk0p6. See 'systemctl status systemd-fsck@dev-mmcblk0p6.service' for details. [DEPEND] Dependency failed for /mnt/data. [DEPEND] Dependency failed for /var/log. [DEPEND] Dependency failed for Local File Systems. [ 8.738368] RTW: rtw_rfctl_decide_init_chplan chplan:0x7F [DEPEND] Dependency failed for Upda-[ 8.749001] RTW: rtw_set_country_cmd country_code:"KZ" --MP about Syste[ 8.754730] RTW: default domain:0x5e applied, txpwr_lmt:?ETSI m Boot/Shutdown RTW: world wide applied, txpwr_lmt:WW [0m. [ 8.768732] RTW: rtw_ndev_init(wlan0) if1 mac_addr=c8:fe:0f:0b:1c:02 [ 8.775822] RTW: rtw_ndev_init(wlan1) if2 mac_addr=ca:fe:0f:0b:1c:02 [[ 8.782910] usbcore: registered new interface driver rtl8733bu DEPEND] Depe[ 8.783428] usbcore: registered new interface driver btusb ndency failed for Upda…about System R[ 8.799929] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723 unlevel Changes. [ 8.810962] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 8.817432] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin [[ 8.825836] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin DEPEND] Depe[ 8.833376] Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507 ndency failed for Flus…Journal to Persistent Storage. [ OK ] Stopped Dispatch Password …ts to Console Directory Watch. [ OK ] Stopped Forward Password R…uests to Wall Directory Watch. [ OK ] Reached target Bluetooth. [ OK ] Reached target Timers. Starting Load/Save RF Kill Switch Status... [ OK ] Reached target Login Prompts. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target Sockets. [ OK ] Started Emergency Shell. [ OK ] Reached target Emergency Mode. Starting prepare mounts and symlinks to config files... [ OK ] Started Load/Save RF Kill Switch Status. [ 9.200879] Bluetooth: hci0: RTL: fw version 0xd9b80b4f [ OK ] Finished prepare mounts and symlinks to config files. Starting Raise network interfaces... Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. You are in emergency mode. After logging in, type "journalctl -xb" to view system logs, "systemGive root password for maintenance (or press Control-D to continue): [ 33.757471] dcdc4: disabling