U-Boot 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 2 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 2 ms (159.2 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6479792 bytes read in 139 ms (44.5 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57723 bytes read in 4 ms (13.8 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-commercial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x62dfb0 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb159+wb1 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Fri Mar 22 15:10:33 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0xbec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 2043848K/2097152K available (10240K kernel code, 1478K rwdata, 3228K rodata, 1024K init, 306K bss, 36920K reserved, 16384K cma-reserved, 1294324K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31878 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000021] Switching to timer-based delay loop, resolution 41ns [ 0.000356] Console: colour dummy device 80x30 [ 0.000428] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000455] pid_max: default: 32768 minimum: 301 [ 0.000693] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000719] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001893] CPU: Testing write buffer coherency: ok [ 0.002319] /cpus/cpu@0 missing clock-frequency property [ 0.002362] /cpus/cpu@1 missing clock-frequency property [ 0.002403] /cpus/cpu@2 missing clock-frequency property [ 0.002448] /cpus/cpu@3 missing clock-frequency property [ 0.002465] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003523] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.003719] rcu: Hierarchical SRCU implementation. [ 0.004638] smp: Bringing up secondary CPUs ... [ 0.015743] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.026991] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.038133] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.038310] smp: Brought up 1 node, 4 CPUs [ 0.038347] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.038359] CPU: All CPU(s) started in HYP mode. [ 0.038371] CPU: Virtualization extensions available. [ 0.039534] devtmpfs: initialized [ 0.052354] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.052654] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.052689] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.053654] pinctrl core: initialized pinctrl subsystem [ 0.055200] NET: Registered protocol family 16 [ 0.057728] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.058993] thermal_sys: Registered thermal governor 'step_wise' [ 0.059500] No ATAGs? [ 0.059729] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.059746] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.109662] SCSI subsystem initialized [ 0.109919] usbcore: registered new interface driver usbfs [ 0.109978] usbcore: registered new interface driver hub [ 0.110047] usbcore: registered new device driver usb [ 0.110436] mc: Linux media interface: v0.10 [ 0.110483] videodev: Linux video capture interface: v2.00 [ 0.110558] pps_core: LinuxPPS API ver. 1 registered [ 0.110572] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.110601] PTP clock support registered [ 0.110895] Advanced Linux Sound Architecture Driver Initialized. [ 0.112036] clocksource: Switched to clocksource arch_sys_counter [ 0.751345] NET: Registered protocol family 2 [ 0.752385] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.752443] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.752523] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.752645] TCP: Hash tables configured (established 8192 bind 8192) [ 0.752804] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.752877] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.753127] NET: Registered protocol family 1 [ 0.753865] RPC: Registered named UNIX socket transport module. [ 0.753889] RPC: Registered udp transport module. [ 0.753902] RPC: Registered tcp transport module. [ 0.753914] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.755558] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.757162] Initialise system trusted keyrings [ 0.757440] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 0.766096] NFS: Registering the id_resolver key type [ 0.766160] Key type id_resolver registered [ 0.766174] Key type id_legacy registered [ 0.863034] Key type asymmetric registered [ 0.863061] Asymmetric key parser 'x509' registered [ 0.863214] bounce: pool size: 64 pages [ 0.863291] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.863308] io scheduler mq-deadline registered [ 0.863321] io scheduler kyber registered [ 0.864491] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.888298] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.902456] brd: module loaded [ 0.913346] loop: module loaded [ 0.919023] libphy: Fixed MDIO Bus: probed [ 0.920183] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 0.920805] libphy: sun4i_mii_bus: probed [ 0.923131] CAN device driver interface [ 0.925246] PPP generic driver version 2.4.2 [ 0.925506] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.925524] ehci-platform: EHCI generic platform driver [ 0.926545] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.926582] ohci-platform: OHCI generic platform driver [ 0.927665] usbcore: registered new interface driver usb-storage [ 0.927780] usbcore: registered new interface driver usbserial_generic [ 0.927820] usbserial: USB Serial support registered for generic [ 0.929829] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 0.929849] sun6i-rtc 1c20400.rtc: RTC enabled [ 0.930230] i2c /dev entries driver [ 0.936605] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.939698] ledtrig-cpu: registered to indicate activity on CPUs [ 0.940342] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 0.940670] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.941330] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.941533] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.941730] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.941888] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 0.942165] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 0.942378] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 0.942557] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 0.942766] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 0.944573] usbcore: registered new interface driver usbhid [ 0.944593] usbhid: USB HID core driver [ 0.950381] Initializing XFRM netlink socket [ 0.951070] NET: Registered protocol family 10 [ 0.952229] Segment Routing with IPv6 [ 0.952361] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.953110] NET: Registered protocol family 17 [ 0.953141] can: controller area network core [ 0.953242] NET: Registered protocol family 29 [ 0.953257] can: raw protocol [ 0.953271] can: broadcast manager protocol [ 0.953292] can: netlink gateway - max_hops=1 [ 0.953729] Key type dns_resolver registered [ 0.953823] Registering SWP/SWPB emulation handler [ 0.953938] registered taskstats version 1 [ 0.954000] Loading compiled-in X.509 certificates [ 0.974225] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.978583] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.979383] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 0.983331] printk: console [ttyS0] disabled [ 0.983483] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i [ 1.921320] printk: console [ttyS0] enabled [ 1.926552] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 1.933390] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 1.940004] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 1.947342] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 1.958043] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 1.967965] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.976068] libphy: sun4i_mii_bus: probed [ 1.980971] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 1.987823] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 1.994457] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.003913] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.010707] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.017350] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.024863] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.035393] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.043832] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.050621] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.057084] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.064408] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.074762] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.089220] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.105348] vcc-3v3: supplied by regulator-dummy [ 2.110884] vdd-cpu: supplied by regulator-dummy [ 2.116441] vdd-sys: supplied by regulator-dummy [ 2.121921] dcdc4: supplied by regulator-dummy [ 2.127392] vcc-dram: supplied by regulator-dummy [ 2.132287] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.139279] vcc-gmac-phy: supplied by vcc-3v3 [ 2.144718] dc5ldo: supplied by vcc-dram [ 2.149221] tv: Bringing 700000uV into 3300000-3300000uV [ 2.155222] tv: supplied by regulator-dummy [ 2.159991] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.166339] aldo2: supplied by regulator-dummy [ 2.172164] avcc-pll: supplied by regulator-dummy [ 2.177828] eldo1: supplied by regulator-dummy [ 2.183237] eldo2: supplied by regulator-dummy [ 2.188304] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.195183] vcc-pe: supplied by regulator-dummy [ 2.200306] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.207331] vcc-sd-alt: supplied by regulator-dummy [ 2.213173] dldo2: supplied by regulator-dummy [ 2.218568] dldo3: supplied by regulator-dummy [ 2.223989] dldo4: supplied by regulator-dummy [ 2.228922] rtc_ldo: supplied by regulator-dummy [ 2.234496] ldo_io0: supplied by regulator-dummy [ 2.239986] ldo_io1: supplied by regulator-dummy [ 2.245400] axp20x-adc axp22x-adc: DMA mask not set [ 2.250713] random: fast init done [ 2.255380] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 2.265847] axp20x-i2c 0-0034: AXP20X driver loaded [ 2.300302] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 2.308093] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i [ 2.318620] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.322065] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 2.326609] libphy: sun4i_mii_bus: probed [ 2.420753] mmc0: new DDR MMC card at address 0001 [ 2.426473] mmcblk0: mmc0:0001 MMC64G 58.2 GiB [ 2.431404] mmcblk0boot0: mmc0:0001 MMC64G partition 1 4.00 MiB [ 2.437818] mmcblk0boot1: mmc0:0001 MMC64G partition 2 4.00 MiB [ 2.444074] mmcblk0rpmb: mmc0:0001 MMC64G partition 3 4.00 MiB, chardev (246:0) [ 2.454831] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.475753] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:d0:cb [ 2.484944] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 2.491304] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 2.497656] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 2.503779] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 2.511003] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 2.518251] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 2.523238] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 2.530024] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 2.535695] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 2.542040] libphy: stmmac: probed [ 2.804453] ehci-platform 1c14000.usb: EHCI Host Controller [ 2.810063] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 2.818301] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 2.852046] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 2.859142] hub 1-0:1.0: USB hub found [ 2.862999] hub 1-0:1.0: 1 port detected [ 2.868175] ehci-platform 1c19000.usb: EHCI Host Controller [ 2.873806] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 2.881789] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 2.912042] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 2.919050] hub 2-0:1.0: USB hub found [ 2.922894] hub 2-0:1.0: 1 port detected [ 2.927964] ehci-platform 1c1c000.usb: EHCI Host Controller [ 2.933581] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 2.941571] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 2.972396] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 2.979388] hub 3-0:1.0: USB hub found [ 2.983215] hub 3-0:1.0: 1 port detected [ 3.082134] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.088771] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.096764] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 3.176935] hub 4-0:1.0: USB hub found [ 3.180741] hub 4-0:1.0: 1 port detected [ 3.185859] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 3.192518] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 3.200430] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 3.276935] hub 5-0:1.0: USB hub found [ 3.280741] hub 5-0:1.0: 1 port detected [ 3.285849] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 3.292525] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 3.300321] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 3.307595] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 3.386971] hub 6-0:1.0: USB hub found [ 3.390778] hub 6-0:1.0: 1 port detected [ 3.403805] of_cfs_init [ 3.406373] of_cfs_init: OK [ 3.409878] ALSA device list: [ 3.412905] No soundcards found. [ 3.425584] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 3.446193] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 3.453570] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 3.719653] EXT4-fs (mmcblk0p2): recovery complete [ 3.725425] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.733627] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.741120] devtmpfs: mounted [ 3.748958] Freeing unused kernel memory: 1024K [ 3.753767] Run /sbin/init as init process [ 3.952067] systemd[1]: System time before build time, advancing clock. [ 4.010875] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.035169] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.073314] systemd[1]: Set hostname to . [ 4.838013] systemd[1]: Queued start job for default target Graphical Interface. [ 4.847317] random: systemd: uninitialized urandom read (16 bytes read) [ 4.857934] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.892308] random: systemd: uninitialized urandom read (16 bytes read) [ 4.900829] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 4.942324] random: systemd: uninitialized urandom read (16 bytes read) [ 4.950994] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.994062] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.033868] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.072698] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.112567] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.152553] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.164682] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.202692] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.242275] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.273389] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.312753] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 5.363320] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 5.372720] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.413325] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.453351] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.493007] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.533217] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 5.547240] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.588855] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 5.628335] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 5.668866] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 5.710372] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 5.759338] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 5.799208] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 5.823146] fuse: init (API version 7.32) [ 5.834891] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.850724] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 5.905224] systemd[1]: Starting Journal Service... Starting Journal Service... [ 5.922585] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 5.938426] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 5.963756] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 5.971655] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 5.983016] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System 5.994115] systemd[1]: Mounted Kernel Trace File System. m. [ OK ] Mounted Kernel Trace File System 6.006864] systemd[1]: Finished Create list of static device nodes for the current kernel. m. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.034466] systemd[1]: modprobe@drm.service: Succeeded. [ 6.044178] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.085366] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.092591] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 6.134666] systemd[1]: Finished File System Check on Root Device. [ OK ] Finished File System Check on Root Device. [ 6.174859] systemd[1]: Finished Load Kernel Modules. [ OK ] Finished Load Kernel Modules. [ 6.213032] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 6.404537] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 7.391540] Driver for 1-wire Dallas network protocol. [ 7.635543] usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, using dummy regulator [ 7.799343] wbec spi0.0: WBEC device added [ 7.907859] Bluetooth: Core ver 2.22 [ 7.911641] NET: Registered protocol family 31 [ 7.916214] Bluetooth: HCI device and connection manager initialized [ 7.922800] Bluetooth: HCI socket layer initialized [ 7.927723] Bluetooth: L2CAP socket layer initialized [ 7.932937] Bluetooth: SCO socket layer initialized [ 7.965619] usbcore: registered new interface driver btusb [ 7.995681] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 8.006227] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 8.012783] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 8.031190] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 8.032970] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.037755] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 8.054695] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 8.130515] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.156963] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ OK ] Found device /dev/mmcblk0p6. [ 8.557312] wbec-watchdog wbec-watchdog.5.auto: DMA mask not set [ 8.557611] wbec-adc wbec-adc.3.auto: DMA mask not set [ 8.565161] wbec-gpio wbec-gpio.4.auto: DMA mask not set [ 8.565167] wbec-rtc wbec-rtc.6.auto: DMA mask not set [ 8.566145] wbec-power wbec-power.8.auto: DMA mask not set [ 8.569168] iio-rescale vbus-debug-volt: using raw+scale source channel [ 8.593252] wbec-pwrkey wbec-pwrkey.7.auto: DMA mask not set [ 8.599238] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.7.auto/input/input0 [ 8.610810] wbec-rtc wbec-rtc.6.auto: registered as rtc0 [ OK ] Found device /dev/mmcblk0p5. [ 8.621932] wbec-rtc wbec-rtc.6.auto: setting system clock to 2026-03-13T15:02:59 UTC (1773414179) [ 8.636061] iio-rescale vbus-network-volt: using raw+scale source channel [ 8.654096] iio-rescale a1-volt: using raw+scale source channel [ 8.667728] iio-rescale a2-volt: using raw+scale source channel [ 8.691911] iio-rescale a3-volt: using raw+scale source channel [ 8.698427] RTL871X: module init start [ 8.702323] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ 8.704315] iio-rescale a4-volt: using raw+scale source channel [ 8.724004] iio-rescale vin-volt: using raw+scale source channel [ 8.735325] iio-rescale v33-volt: using raw+scale source channel [ 8.747764] iio-rescale v50-volt: using raw+scale source channel [ OK ] Found device /dev/ttyS0. [ 8.879926] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ 8.926109] RTL871X: rtw_ndev_init(wlan0) [ 8.931411] RTL871X: rtw_ndev_init(wlan1) [ 8.936771] usbcore: registered new interface driver rtl8723bu [ 8.942656] RTL871X: module init ret=0 [ 9.050244] usbcore: registered new interface driver rtl8xxxu [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... Starting Load/Save RF Kill Switch Status... [ 9.362160] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Reached target Swap. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 9.736007] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 9.930890] systemd-journald[138]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config files... [ 9.951943] systemd-journald[138]: File /var/log/journal/d22b52bc895c40d9bd596fad38a0dc13/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 10.092150] random: crng init done [ 10.095602] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ 10.378302] w1_master_driver w1_bus_master1: w1_search: max_slave_count 64 reached, will continue next search. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Monitor directorie… templates for wb-mqtt-serial. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Paths. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Authorization Manager... Starting User Login Management... [ OK ] Started Wiren Board Cloud Agent. [ 11.878424] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.883923] Bluetooth: BNEP filters: protocol multicast [ 11.883965] Bluetooth: BNEP socket layer initialized Starting telegraf metric sender for Wiren Board Cloud... Starting telegraf metric sender for Wiren Board Cloud... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... [ OK ] Started Generates wb-mqtt-… UI schema for wb-mqtt-confed. Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started telegraf metric sender for Wiren Board Cloud. [ OK ] Started telegraf metric sender for Wiren Board Cloud. [ OK ] Started Bluetooth service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started WPA supplicant. [ OK ] Started Authorization Manager. [ OK ] Started User Login Management. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. [ OK ] Started Network Manager. Starting Network Manager Wait Online... Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ 14.353885] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 14.365771] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 14.373266] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 14.380968] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 14.396309] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode Starting Online ext4 Metad…a Check for All Filesystems... [ OK ] Finished Online ext4 Metadata Check for All Filesystems. [ 20.008264] mcp230xx 1-0027: error -ENXIO: can't write IOCON 39 [ 20.396331] RTL871X: assoc success [ 20.400770] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 21.396025] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 131, base_baud = 3000000) is a Allwinner sun4i [ OK ] Finished Network Manager Wait Online. [ OK ] Stopped telegraf metric sender for Wiren Board Cloud. Starting telegraf metric sender for Wiren Board Cloud... [ OK ] Stopped telegraf metric sender for Wiren Board Cloud. Starting telegraf metric sender for Wiren Board Cloud... [ OK ] Finished Initialize Wiren Board Device Tree overlays. [ OK ] Started telegraf metric sender for Wiren Board Cloud. [ OK ] Started telegraf metric sender for Wiren Board Cloud. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Stopped Wiren Board Cloud Agent. [ OK ] Started Wiren Board Cloud Agent. Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started KNX Daemon. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [ OK ] Reached target Network is Online. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Getty on tty1. Starting LSB: Brings up/down network automatically... Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Started OpenBSD Secure Shell server. [ OK ] Stopped KNX Daemon. Starting KNX Daemon... [ 25.557290] process '/usr/sbin/netplugd' started with executable stack [ OK ] Finished Compensation of s…ice-tree (with opposite sign). [ OK ] Started KNX Daemon. [ OK ] Finished KNXD Configurator for Wiren Board. [ OK ] Started A high performance…er and a reverse proxy server. Starting USB Debug Network... [ OK ] Started LSB: Brings up/down network automatically. Debian GNU/Linux 11 wirenboard-AKLZAJIN ttyS0 wirenboard-AKLZAJIN login: [ 33.762939] vcc-gmac-phy: disabling [ 33.767314] dc5ldo: disabling [ 33.771541] dldo4: disabling [ 33.778705] vdd-sd-power: disabling [ 33.782395] vcc-sd: disabling wirenboard-AKLZAJIN login: [ 41.897540] Mass Storage Function, version: 2009/09/11 [ 41.902877] LUN: removable file: (no medium) [ 42.006948] using random self ethernet address [ 42.011486] using random host ethernet address [ 42.211189] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 42.215985] dbg0: MAC 1a:55:89:a2:69:43 wirenboard-AKLZAJIN login: root Password: _ _ _ __ _(_)_ __ ___ _ __ | |__ ___ __ _ _ __ __| | \ \ /\ / / | '__/ _ \ '_ \| '_ \ / _ \ / _` | '__/ _` | \ V V /| | | | __/ | | | |_) | (_) | (_| | | | (_| | \_/\_/ |_|_| \___|_| |_|_.__/ \___/ \__,_|_| \__,_| Welcome to Wiren Board 7.4.3 (s/n AKLZAJIN), release wb-2401 (as stable) Linux wirenboard-AKLZAJIN 5.10.35-wb159+wb1 #1 SMP Fri Mar 22 15:10:33 UTC 2024 armv7l GNU/Linux System load: 5.16 1.35 0.45 Up time: 0 min Memory usage: 5% of 1.96G Usage of /: 37% of 2.0G /mnt/data: 3% of 55G 168 package updates are available; type 'apt update && apt upgrade' to update them. Last login: Sat Dec 27 13:28:40 UTC 2025 on ttyS0 root@wirenboard-AKLZAJIN:~# [ 60.134943] Alignment trap: not handling instruction e8542f00 at [] [ 60.142177] 8<--- cut here --- [ 60.145265] Unhandled fault: alignment exception (0x001) at 0x007e4901 [ 60.151834] pgd = 6f48d893 [ 60.154709] [007e4901] *pgd=beae5835 [ 63.498467] w1_master_driver w1_bus_master1: Attaching one wire slave 00.800000000000 crc 8c [ 63.537663] w1_master_driver w1_bus_master1: Family 0 for 00.800000000000.8c is not registered. root@wirenboard-AKLZAJIN:~# ls root@wirenboard-AKLZAJIN:~# [EC] Watchdog is timed out, reset power. U-Boot SPL 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) DRAM: 2048 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 2 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 2 ms (159.2 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6479792 bytes read in 140 ms (44.1 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57723 bytes read in 4 ms (13.8 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-commercial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x62dfb0 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb159+wb1 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Fri Mar 22 15:10:33 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0xbec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 2043848K/2097152K available (10240K kernel code, 1478K rwdata, 3228K rodata, 1024K init, 306K bss, 36920K reserved, 16384K cma-reserved, 1294324K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31878 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000021] Switching to timer-based delay loop, resolution 41ns [ 0.000357] Console: colour dummy device 80x30 [ 0.000428] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000457] pid_max: default: 32768 minimum: 301 [ 0.000693] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000720] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001895] CPU: Testing write buffer coherency: ok [ 0.002315] /cpus/cpu@0 missing clock-frequency property [ 0.002359] /cpus/cpu@1 missing clock-frequency property [ 0.002400] /cpus/cpu@2 missing clock-frequency property [ 0.002445] /cpus/cpu@3 missing clock-frequency property [ 0.002461] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003527] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.003727] rcu: Hierarchical SRCU implementation. [ 0.004646] smp: Bringing up secondary CPUs ... [ 0.015756] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.027000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.038136] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.038315] smp: Brought up 1 node, 4 CPUs [ 0.038351] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.038365] CPU: All CPU(s) started in HYP mode. [ 0.038376] CPU: Virtualization extensions available. [ 0.039533] devtmpfs: initialized [ 0.052346] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.052650] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.052685] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.053651] pinctrl core: initialized pinctrl subsystem [ 0.055185] NET: Registered protocol family 16 [ 0.057703] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.058972] thermal_sys: Registered thermal governor 'step_wise' [ 0.059485] No ATAGs? [ 0.059713] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.059729] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.109599] SCSI subsystem initialized [ 0.109862] usbcore: registered new interface driver usbfs [ 0.109922] usbcore: registered new interface driver hub [ 0.109993] usbcore: registered new device driver usb [ 0.110382] mc: Linux media interface: v0.10 [ 0.110431] videodev: Linux video capture interface: v2.00 [ 0.110504] pps_core: LinuxPPS API ver. 1 registered [ 0.110518] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.110546] PTP clock support registered [ 0.110841] Advanced Linux Sound Architecture Driver Initialized. [ 0.111990] clocksource: Switched to clocksource arch_sys_counter [ 0.751244] NET: Registered protocol family 2 [ 0.752271] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.752330] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.752411] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.752533] TCP: Hash tables configured (established 8192 bind 8192) [ 0.752691] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.752766] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.753017] NET: Registered protocol family 1 [ 0.753753] RPC: Registered named UNIX socket transport module. [ 0.753779] RPC: Registered udp transport module. [ 0.753792] RPC: Registered tcp transport module. [ 0.753804] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.755442] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.757040] Initialise system trusted keyrings [ 0.757319] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 0.765860] NFS: Registering the id_resolver key type [ 0.765918] Key type id_resolver registered [ 0.765931] Key type id_legacy registered [ 0.864233] Key type asymmetric registered [ 0.864258] Asymmetric key parser 'x509' registered [ 0.864430] bounce: pool size: 64 pages [ 0.864539] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.864557] io scheduler mq-deadline registered [ 0.864571] io scheduler kyber registered [ 0.865789] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.889737] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.903953] brd: module loaded [ 0.914788] loop: module loaded [ 0.920456] libphy: Fixed MDIO Bus: probed [ 0.921611] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 0.922378] libphy: sun4i_mii_bus: probed [ 0.924462] CAN device driver interface [ 0.926562] PPP generic driver version 2.4.2 [ 0.926819] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.926836] ehci-platform: EHCI generic platform driver [ 0.927864] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.927900] ohci-platform: OHCI generic platform driver [ 0.928974] usbcore: registered new interface driver usb-storage [ 0.929090] usbcore: registered new interface driver usbserial_generic [ 0.929131] usbserial: USB Serial support registered for generic [ 0.931163] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 0.931185] sun6i-rtc 1c20400.rtc: RTC enabled [ 0.931568] i2c /dev entries driver [ 0.938007] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.941045] ledtrig-cpu: registered to indicate activity on CPUs [ 0.941659] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 0.942098] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.942656] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.942865] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.943064] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.943221] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 0.943425] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 0.943617] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 0.943795] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 0.944002] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 0.945858] usbcore: registered cu: Got hangup signal