root@wirenboard-AA4UI2QG:~# [63040.541677] RTL871X: set group key camid:2, addr: 00:00:00:00:00:00, kid:2, type:TKIP Stopping Session c1 of user root. [ OK ] Removed slice system-modprobe.slice. [ OK ] Stopped target Bluetooth. [ OK ] Stopped target Graphical Interface. [ OK ] Stopped target Timers. [ OK ] Stopped Daily apt upgrade and clean activities. [ OK ] Stopped Daily apt download activities. [ OK ] Stopped Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Stopped Discard unused blocks once a week. [ OK ] Stopped Daily rotation of log files. [ OK ] Stopped Daily Cleanup of Temporary Directories. [ OK ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch. Stopping Bluetooth service... Stopping Simple CGI Server... Stopping Load/Save Random Seed... Stopping watchdog daemon... [ OK ] Stopped Bluetooth service. [ OK ] Stopped Serial Getty on ttymxc0. [ OK ] Stopped Wiren Board firmware update service. [ OK ] Stopped Simple CGI Server. [ OK ] Stopped Load/Save Random Seed. [ OK ] Stopped watchdog daemon. [ OK ] Stopped Session c1 of user root. [ OK ] Removed slice system-serial\x2dgetty.slice. [ OK ] Stopped target Multi-User System. [ OK ] Stopped target Login Prompts. Stopping Modem Manager... Stopping Avahi mDNS/DNS-SD Stack... Stopping Regular background program processing daemon... Stopping Getty on tty1... Stopping LSB: Brings up/down network automatically... Stopping User Login Management... Stopping User Manager for UID 0... Stopping Network connectio…ice for Wiren Board devices... Stopping Wiren Board modbus devices manager... Stopping one-click diagnos…enerating archive with data... Stopping Initialize Wiren Board on successful boot... [ OK ] Stopped KNXD Configurator for Wiren Board. Stopping MQTT Driver for ADC... Stopping Wiren Board configuration editor backend... Stopping Wiren Board database logger... Stopping MQTT Driver for GPIO-controlled switches... Stopping Wiren Board MQTT to IEC 60870-5-104 gateway... Stopping Wiren Board MQTT KNX bridge... Stopping Wiren Board journald to MQTT gateway... Stopping Wiren Board MQTT to Modbus TCP gateway... Stopping metrics sender.... Stopping Virtual MQTT devi…Network Manager connections... Stopping Wiren Board MQTT to OPC UA gateway... Stopping Kernel 1-Wire MQTT driver for WB-HomA... Stopping MQTT Rule engine for Wiren Board... [ OK ] Stopped Compensation of sy…ice-tree (with opposite sign). [ OK ] Stopped Regular background program processing daemon. [ OK ] Stopped Avahi mDNS/DNS-SD Stack. [ OK ] Stopped Modem Manager. [ OK ] Stopped Network connection…rvice for Wiren Board devices. [ OK ] Stopped Getty on tty1. [ OK ] Stopped Wiren Board configuration editor backend. [ OK ] Stopped Wiren Board database logger. [ OK ] Stopped Wiren Board journald to MQTT gateway. [ OK ] Stopped metrics sender.. [ OK ] Stopped Wiren Board MQTT to IEC 60870-5-104 gateway. [ OK ] Stopped Wiren Board MQTT to OPC UA gateway. [ OK ] Stopped Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Stopped Wiren Board MQTT KNX bridge. [ OK ] Stopped Wiren Board MQTT to Modbus TCP gateway. [ OK ] Stopped one-click diagnost… generating archive with data. [ OK ] Stopped MQTT Driver for ADC. [ OK ] Stopped MQTT Driver for GPIO-controlled switches. [ OK ] Stopped MQTT Rule engine for Wiren Board. [ OK ] Stopped User Manager for UID 0. [ OK ] Stopped Wiren Board modbus devices manager. [ OK ] Stopped User Login Management. [ OK ] Stopped LSB: Brings up/down network automatically. [ OK ] Removed slice system-getty.slice. [ OK ] Stopped target Network is Online. [ OK ] Stopped Network Manager Wait Online. Stopping KNX Daemon... Stopping Authorization Manager... Stopping User Runtime Directory /run/user/0... Stopping MQTT Driver for serial devices... [ OK ] Stopped Authorization Manager. [ OK ] Stopped KNX Daemon. [ OK ] Unmounted /run/user/0. [ OK ] Stopped User Runtime Directory /run/user/0. [ OK ] Removed slice User Slice of UID 0. Stopping Permit User Sessions... [ OK ] Stopped MQTT Driver for serial devices. [ OK ] Stopped Permit User Sessions. [ OK ] Stopped Initialize Wiren Board on successful boot. [ OK ] Stopped target Remote File Systems. Stopping A high performanc… and a reverse proxy server... Stopping Network Time Service... Stopping OpenBSD Secure Shell server... [ OK ] Stopped Network Time Service. [ OK ] Stopped OpenBSD Secure Shell server. [ OK ] Stopped A high performance…er and a reverse proxy server. [ OK ] Stopped target Host and Network Name Lookups. [ OK ] Stopped Virtual MQTT devic…r Network Manager connections. Stopping Mosquitto MQTT Broker... [ OK ] Stopped Mosquitto MQTT Broker. [ OK ] Stopped target Network. Stopping Network Manager... Stopping Raise network interfaces... [63372.125645] RTL871X: clear key for addr:50:ff:20:54:20:26, camid:4 Stopping WPA supplicant... [63372.143787] RTL871X: clear key for addr:50:ff:20:54:20:26, camid:5 [ OK ] Stopped WPA supplicant. [ OK ] Stopped Raise network interfaces. [ OK ] Stopped Initialize Wiren Board Device Tree overlays. Stopping watch config files... [ OK ] Stopped watch config files. [ OK ] Stopped Network Manager. Stopping D-Bus System Message Bus... [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped target Basic System. [ OK ] Stopped target Paths. [ OK ] Stopped Monitor directorie… templates for wb-mqtt-serial. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Sockets. [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Closed fcgiwrap Socket. [ OK ] Closed KNX Daemon (socket). [ OK ] Stopped target System Initialization. [ OK ] Stopped target Local Encrypted Volumes. [ OK ] Stopped Dispatch Password …ts to Console Directory Watch. [ OK ] Stopped Forward Password R…uests to Wall Directory Watch. [ OK ] Stopped target Swap. Deactivating swap /dev/dis…mmc-Q2J55L_0x11de8c21-part5... [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Load Kernel Modules. Stopping Update UTMP about System Boot/Shutdown... [ OK ] Deactivated swap /dev/disk…th/platform-2194000.mmc-part5. [ OK ] Deactivated swap /dev/disk/by-partuuid/9cd5a341-05. [ OK ] Deactivated swap /dev/disk…b-4b58-4a43-8a60-fca78dff5d7a. [ OK ] Deactivated swap /dev/disk…d/mmc-Q2J55L_0x11de8c21-part5. [ OK ] Deactivated swap /dev/mmcblk0p5. [ OK ] Stopped Update UTMP about System Boot/Shutdown. [ OK ] Stopped Create Volatile Files and Directories. Stopping Flush Journal to Persistent Storage... Stopping prepare mounts and symlinks to config files... [ OK ] Stopped 63374.426133] systemd-journald[122]: Received client request to relinquish /var/log/journal/0a5d2211e6294a85957f415e92b2ee0b access. ;39mprepare mounts and symlinks to config files. [ OK ] Stopped target Local File Systems. [ OK ] Unset automount mnt-sdcard.automount. [ OK ] Stopped Flush Journal to Persistent Storage. Unmounting /var/log... [ OK ] Unmounted /var/log. Unmounting /mnt/data... [ OK ] Unmounted /mnt/data. [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped File System Check on /dev/mmcblk0p6. [ OK ] Removed slice system-systemd\x2dfsck.slice. [ OK ] Stopped target Local File Systems (Pre). [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Create System Users. [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Stopped File System Check on Root Device. [ OK ] Reached target Shutdown. [ OK ] Reached target Final Step. [ OK ] Finished Reboot. [ OK ] Reached target Reboot. [63375.748897] watchdog: watchdog0: watchdog did not stop! [63375.862431] systemd-shutdown[1]: Syncing filesystems and block devices. [63375.874581] systemd-shutdown[1]: Sending SIGTERM to remaining processes... [63375.895883] systemd-journald[122]: Received SIGTERM from PID 1 (systemd-shutd ow). [63375.942662] systemd-shutdown[1]: Sending SIGKILL to remaining processes... [63375.977297] systemd-shutdown[1]: Using hardware watchdog 'imx2+ watchdog', ve rsion 0, device /dev/watchdog [63376.001928] systemd-shutdown[1]: Unmounting file systems. [63376.023479] [11832]: Remounting '/' read-only in with options 'discard,errors =remount-ro'. [63376.063912] EXT4-fs (mmcblk0p3): re-mounted. Opts: discard,errors=remount-ro [63376.088392] systemd-shutdown[1]: All filesystems unmounted. [63376.094040] systemd-shutdown[1]: Deactivating swaps. [63376.100168] systemd-shutdown[1]: All swaps deactivated. [63376.105803] systemd-shutdown[1]: Detaching loop devices. [63376.120705] systemd-shutdown[1]: All loop devices detached. [63376.126532] systemd-shutdown[1]: Stopping MD devices. [63376.132277] systemd-shutdown[1]: All MD devices stopped. [63376.137839] systemd-shutdown[1]: Detaching DM devices. [63376.143642] systemd-shutdown[1]: All DM devices detached. [63376.149201] systemd-shutdown[1]: All filesystems, swaps, loop devices, MD dev ices and DM devices detached. [63376.170456] systemd-shutdown[1]: Syncing filesystems and block devices. [63376.179821] systemd-shutdown[1]: Rebooting. [63376.184415] ci_hdrc ci_hdrc.0: remove, state 1 [63376.189082] usb usb1: USB disconnect, device number 1 [63376.194147] usb 1-1: USB disconnect, device number 2 [63376.203855] ci_hdrc ci_hdrc.0: USB bus 1 deregistered [63376.240996] ci_hdrc ci_hdrc.1: remove, state 1 [63376.245585] usb usb2: USB disconnect, device number 1 [63376.250648] usb 2-1: USB disconnect, device number 2 [63376.255653] usb 2-1.1: USB disconnect, device number 3 [63376.266056] RTL871X: rtw_ndev_uninit(wlan0) [63376.271699] RTL871X: rtw_ndev_uninit(wlan1) [63376.277310] RTL871X: rtw_cmd_thread: DriverStopped(1) SurpriseRemoved(1) brea k at line 451 [63376.285708] RTL871X: rtw_dev_unload: driver not in IPS [63376.297280] ci_hdrc ci_hdrc.1: USB bus 2 deregistered [63376.302584] imx2-wdt 20bc000.watchdog: Device shutdown: Expect reboot! [63376.309259] reboot: Restarting system U-Boot SPL 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) DRAM init ok, rows:15, ncs:1, size: 512MB .p0_mpdgctrl0 = 0x011b011a .p0_mpdgctrl1 = 0x0e3f0e3f .p0_mprddlctl = 0x3f3f4141 .p0_mpwrdlctl = 0x3f3f3d35 .p0_mpwldectrl0 = 0x00030005 .p0_mpwldectrl1 = 0x00060006 Trying to boot from MMC1 Warning - USDHC2 controller not supporting U-Boot 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 58C Reset cause: WDOG Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 1 In: serial Out: serial Err: serial Loading Environment from MMC... OK Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd o tp_program otp_aes_program ## Info: input data size = 55 = 0x37 bootcount=0 mmcpart=3 upgrade_available=0 wb_webupd=1 Environment size: 55/8188 bytes ## Resetting to default environment ## Info: input data size = 55 = 0x37 Net: eth0: ethernet@2188000 Hit any key to stop autoboot: 0 Saving Environment to MMC... Writing to MMC(1)... OK ## Info: input data size = 4285 = 0x10BD switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Entering firmware update mode (triggered from OS/Web UI) Checking if ubootenv part is present ## Loading FIT header to 0x82000000 ... ## Loading FIT strings to 0x82000028 ... ## Loading FIT struct to 0x82000100 ... Can't find subimage 'ubootenv' Extracting kernel ## Loading FIT header to 0x82000000 ... ## Loading FIT strings to 0x82000028 ... ## Loading FIT struct to 0x82000100 ... 11342336 bytes read in 511 ms (21.2 MiB/s) Description: Update kernel Type: Kernel Image Compression: uncompressed Data Start: 0x82000300 Data Size: 11333376 Bytes = 10.8 MiB Architecture: ARM OS: Linux Load Address: unavailable Entry Point: unavailable Hash algo: sha1 Hash value: b6eb24f9a04042f4afcaee8a0e7f86cf7f91cf12 ## Verifying ... sha1+ Loading part 0 ... OK Extracting DTB ## Loading FIT header to 0x83000000 ... ## Loading FIT strings to 0x83000028 ... ## Loading FIT struct to 0x83000100 ... 57171 bytes read in 32 ms (1.7 MiB/s) Description: Update DTB Type: Flat Device Tree Compression: uncompressed Data Start: 0x83000440 Data Size: 47891 Bytes = 46.8 KiB Architecture: ARM Hash algo: sha1 Hash value: 50379d0c7fb9a54564de1311fee0fb398cef285a ## Verifying ... sha1+ Loading part 0 ... OK Kernel image @ 0x82000000 [ 0x000000 - 0xacef00 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 9ef8b000, end 9ef99b12 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb159 (root@wbdevenv) (arm-linux-gnueabihf- gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #2 SMP Wed Dec 27 07:36:11 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache [ 0.000000] OF: fdt: Machine model: Wiren Board init (i.MX6UL/ULL) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] percpu: Embedded 15 pages/cpu s31692 r8192 d21556 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttymxc0,115200 bootmode=webupdate,.w b-update/webupd.fit [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, l inear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, li near) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 503300K/524288K available (6144K kernel code, 645K rwdata , 1892K rodata, 7168K init, 250K bss, 20988K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x2b0/0x4bc wit h crng_init=0 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000019] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478 484971ns [ 0.000063] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002853] Console: colour dummy device 80x30 [ 0.002933] Calibrating delay loop (skipped), value calculated using timer fr equency.. 48.00 BogoMIPS (lpj=240000) [ 0.002977] pid_max: default: 32768 minimum: 301 [ 0.003277] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linea r) [ 0.003318] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.004604] CPU: Testing write buffer coherency: ok [ 0.005090] CPU0: update cpu_capacity 1024 [ 0.005126] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006309] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.006608] rcu: Hierarchical SRCU implementation. [ 0.007262] smp: Bringing up secondary CPUs ... [ 0.007300] smp: Brought up 1 node, 1 CPU [ 0.007324] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.007345] CPU: All CPU(s) started in SVC mode. [ 0.008258] devtmpfs: initialized [ 0.028879] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.029434] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns [ 0.029489] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.029684] pinctrl core: initialized pinctrl subsystem [ 0.031799] NET: Registered protocol family 16 [ 0.032418] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.034901] thermal_sys: Registered thermal governor 'step_wise' [ 0.035193] cpuidle: using governor menu [ 0.219668] vdd1p1: supplied by regulator-dummy [ 0.232223] vdd3p0: supplied by regulator-dummy [ 0.244792] cpu: supplied by regulator-dummy [ 0.257384] vddsoc: supplied by regulator-dummy [ 0.630699] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.630742] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.631352] debugfs: Directory 'dummy-iomuxc-gpr@20e4000' with parent 'regmap ' already present! [ 0.632127] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.633656] imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus @2200000/iomuxc-snvs@2290000 [ 0.633698] imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl drive r [ 0.680740] mxs-dma 1804000.dma-apbh: initialized [ 0.686375] SCSI subsystem initialized [ 0.686943] usbcore: registered new interface driver usbfs [ 0.687080] usbcore: registered new interface driver hub [ 0.687206] usbcore: registered new device driver usb [ 0.688068] gpio-48 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.688200] gpio-49 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.689129] i2c-gpio i2c_rtc: using lines 48 (SDA) and 49 (SCL) [ 0.689820] gpio-76 (i2c_eeprom1): enforced open drain please flag it properl y in DT/ACPI DSDT/board file [ 0.689948] gpio-67 (i2c_eeprom1): enforced open drain please flag it properl y in DT/ACPI DSDT/board file [ 0.690532] i2c-gpio i2c_eeprom1: using lines 76 (SDA) and 67 (SCL) [ 0.691174] gpio-70 (i2c_eeprom2): enforced open drain please flag it properl y in DT/ACPI DSDT/board file [ 0.691297] gpio-71 (i2c_eeprom2): enforced open drain please flag it properl y in DT/ACPI DSDT/board file [ 0.691899] i2c-gpio i2c_eeprom2: using lines 70 (SDA) and 71 (SCL) [ 0.693579] gpio-30 (scl): enforced open drain please flag it properly in DT/ ACPI DSDT/board file [ 0.693966] i2c i2c-1: IMX I2C adapter registered [ 0.694800] pps_core: LinuxPPS API ver. 1 registered [ 0.694829] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti [ 0.694888] PTP clock support registered [ 0.697357] clocksource: Switched to clocksource mxc_timer1 [ 0.717859] NET: Registered protocol family 2 [ 0.719448] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.719530] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.719644] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.719805] TCP: Hash tables configured (established 4096 bind 4096) [ 0.720006] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.720081] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.720436] NET: Registered protocol family 1 [ 0.721645] RPC: Registered named UNIX socket transport module. [ 0.721686] RPC: Registered udp transport module. [ 0.721707] RPC: Registered tcp transport module. [ 0.721726] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.644729] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counter s available [ 1.648772] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 1.659930] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.661724] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.889237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 49) [ 1.889277] io scheduler mq-deadline registered [ 1.889298] io scheduler kyber registered [ 1.901863] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx 6q.bin failed with error -2 [ 1.901919] imx-sdma 20ec000.sdma: external firmware not found, using ROM fir mware [ 1.906227] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 28, base_baud = 5000000) is a IMX [ 2.563106] random: fast init done [ 2.600907] printk: console [ttymxc0] enabled [ 2.607672] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 66, base_baud = 5000000) is a IMX [ 2.618502] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 67, base_baud = 5000000) is a IMX [ 2.661749] imx_rngc 2284000.rng: Freescale RNGB registered (HW revision 2.12 9) [ 2.669796] random: crng init done [ 2.701082] brd: module loaded [ 2.722279] loop: module loaded [ 2.725804] at24 5-0050: supply vcc not found, using dummy regulator [ 2.737534] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 2.744521] at24 6-0050: supply vcc not found, using dummy regulator [ 2.756078] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 2.764598] libphy: Fixed MDIO Bus: probed [ 2.771986] pps pps0: new PPS source ptp0 [ 2.814001] libphy: fec_enet_mii_bus: probed [ 2.820141] fec 20b4000.ethernet eth0: registered PHC device 0 [ 2.948169] pps pps1: new PPS source ptp1 [ 2.954714] libphy: fec_enet_mii_bus: probed [ 2.963713] fec 2188000.ethernet eth1: registered PHC device 1 [ 2.970743] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.977301] ehci-mxc: Freescale On-Chip EHCI Host driver [ 2.983166] usbcore: registered new interface driver cdc_acm [ 2.989016] cdc_acm: USB Abstract Control Model driver for USB modems and ISD N adapters [ 2.997460] usbcore: registered new interface driver usb-storage [ 3.046544] rtc rtc0: invalid alarm value: 2024-03-13T30:73:00 [ 3.052900] rtc-pcf8563 4-0051: registered as rtc0 [ 3.069878] rtc-pcf8563 4-0051: setting system clock to 2024-03-14T02:31:36 U TC (1710383496) [ 3.088695] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc1 [ 3.095187] i2c /dev entries driver [ 3.105275] imx6ul-pinctrl 20e0000.pinctrl: pin MX6UL_PAD_SD1_DATA1 already r equested by watchdog; cannot claim for watchdog_6x [ 3.116900] imx6ul-pinctrl 20e0000.pinctrl: pin-114 (watchdog_6x) status -22 [ 3.124066] imx6ul-pinctrl 20e0000.pinctrl: could not request pin 114 (MX6UL_ PAD_SD1_DATA1) from group wdggrp_6x on device 20e0000.pinctrl [ 3.136668] gpio-wdt watchdog_6x: Error applying setting, reverse things back [ 3.143989] gpio-wdt: probe of watchdog_6x failed with error -22 [ 3.152234] sdhci: Secure Digital Host Controller Interface driver [ 3.158579] sdhci: Copyright(c) Pierre Ossman [ 3.162954] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.178311] ledtrig-cpu: registered to indicate activity on CPUs [ 3.186343] usbcore: registered new interface driver usbhid [ 3.192080] usbhid: USB HID core driver [ 3.199258] NET: Registered protocol family 17 [ 3.207585] Registering SWP/SWPB emulation handler [ 3.212541] mmc0: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 3.221056] registered taskstats version 1 [ 3.251231] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature gr ade - max:105C critical:100C passive:95C [ 3.263047] of_cfs_init [ 3.265745] of_cfs_init: OK [ 3.285024] Freeing unused kernel memory: 7168K [ 3.289964] Run /init as init process [ 3.312335] mmc0: new DDR MMC card at address 0001 [ 3.324339] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 3.331262] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 3.344029] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 3.357880] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB, chardev (248: 0) mount: mounting none on /dev/pts failed: No such file or directory [ 3.376498] mmcblk0: p1 p2 p3 p4 < p5 p6 > Run busybox watchdog for /dev/watchdog Run busybox watchdog for /dev/watchdog0 Run busybox watchdog for /dev/watchdog1 Run busybox watchdog for /dev/watchdog2 watchdog: can't open '/dev/watchdog0': Device or resource busy Boot mode: webupdate,.wb-update/webupd.fit Board is WB6, loading ci_hdrc_imx module [ 3.659147] imx_usb 2184000.usb: No over current polarity defined [ 3.672969] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 3.677988] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 3.707442] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 3.713215] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.10 [ 3.721584] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 3.728858] usb usb1: Product: EHCI Host Controller [ 3.733753] usb usb1: Manufacturer: Linux 5.10.35-wb159 ehci_hcd [ 3.739806] usb usb1: SerialNumber: ci_hdrc.0 [ 3.746153] hub 1-0:1.0: USB hub found [ 3.750173] hub 1-0:1.0: 1 port detected [ 3.759680] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 3.764628] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 3.797703] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 3.804096] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.10 [ 3.812579] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 3.819988] usb usb2: Product: EHCI Host Controller [ 3.824921] usb usb2: Manufacturer: Linux 5.10.35-wb159 ehci_hcd [ 3.831066] usb usb2: SerialNumber: ci_hdrc.1 [ 3.838141] hub 2-0:1.0: USB hub found [ 3.842027] hub 2-0:1.0: 1 port detected [ 4.117573] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 4.207431] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 4.319579] usb 1-1: New USB device found, idVendor=090c, idProduct=1000, bcd Device= 1.00 [ 4.327964] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.335243] usb 1-1: Product: Silicon-Power4G [ 4.339865] usb 1-1: Manufacturer: UFD 2.0 [ 4.344106] usb 1-1: SerialNumber: 1311022900801992 [ 4.352858] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.360034] scsi host0: usb-storage 1-1:1.0 [ 4.408558] usb 2-1: New USB device found, idVendor=0424, idProduct=2514, bcd Device= b.b3 [ 4.416938] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.427987] hub 2-1:1.0: USB hub found [ 4.431942] hub 2-1:1.0: 4 ports detected [ 4.757501] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 4.908903] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720, b cdDevice= 2.00 [ 4.917309] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 4.924751] usb 2-1.1: Product: 802.11n WLAN Adapter [ 4.929761] usb 2-1.1: Manufacturer: Realtek [ 4.934043] usb 2-1.1: SerialNumber: 00e04c000001 Wait for eMMC to become available... Will use /mnt/data/.wb-update/webupd.fit [ 5.009107] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. O pts: (null) [ 5.368867] scsi 0:0:0:0: Direct-Access UFD 2.0 Silicon-Power4G 1100 PQ : 0 ANSI: 2 [ 5.380852] sd 0:0:0:0: [sda] 16236408 512-byte logical blocks: (8.31 GB/7.74 GiB) [ 5.391949] sd 0:0:0:0: [sda] Write Protect is off [ 5.397655] sd 0:0:0:0: [sda] No Caching mode page found [ 5.403046] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.418442] sda: sda1 [ 5.424630] sd 0:0:0:0: [sda] Attached SCSI removable disk =============================================================================== Thu Mar 14 02:31:39 UTC 2024: started update from /mnt/data/.wb-update/webupd.fi t =============================================================================== Description: WirenBoard firmware update Compatible device: contactless,imx6ul-wirenboard61 Firmware version: 202403111630 Firmware compatible: +single-rootfs +fit-factory-reset +force-repartition +repar tition-ramsize-fix Release name: wb-2401 Release suite: stable Release target: wb6/bullseye Release repo prefix: Time of creation: Mon Mar 11 16:33:04 UTC 2024 =============================================================================== >>> Checking SHA1 hash of install PROGRESS: 0% >>> SHA1 hash of install ok 32+0 records in 32+0 records out 16384 bytes (16 kB, 16 KiB) copied, 0.0114906 s, 1.4 MB/s >>> Firmware seems to be compatible with this controller >>> Extracting install script >>> Running install script >>> Using flags from /mnt/data/.wb-update/install_update.web.flags: --factoryres et >>> Removing web flags file /mnt/data/.wb-update/install_update.web.flags >>> Web UI-triggered update detected, forwarding logs and status to files >>> Console logging enabled; tempfile /tmp/tmp.1TWSR2, final file /mnt/data/.wb- update/wb-console.log will be written on exit >>> Extend tmpfs size to whole RAM >>> Remount tmpfs in /tmp with size=498M >>> Maybe update factoryreset.fit to fix tmpfs size issue at 512M RAM (with emmc update) fit_info: Can't open /tmp/tmp.iNwFsJ/.wb-restore/factoryreset.fit: No such file or directory >>> Replace factoryreset.fit with current fit to fix rootfs extending issue at 5 12M RAM cp: can't create '/tmp/tmp.iNwFsJ/.wb-restore/factoryreset.fit': No such file or directory Web UI-triggered update failed BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) built-in shell (ash) Enter 'help' for a list of built-in commands. sh: can't access tty; job control turned off ~ # [ 33.767525] vref-3v3: disabling