-- Logs begin at Tue 2022-02-01 02:27:13 MSK, end at Thu 2022-02-03 14:48:40 MSK. --
Feb 03 14:18:43 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:18:47 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:18:47 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:18:47 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:18:47 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:18:48 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:18:48 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:18:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:18:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:18:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:18:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:18:50 wirenboard-AXDBEYA3 knxd[27890]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:18:50 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:18:50.061 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:18:50 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:18:50 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:18:50 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:18:56 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:18:57 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:18:58 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:18:59 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:19:00 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:19:00 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:19:00 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:19:00 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:19:00 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:19:00 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:19:01 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:19:02 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:19:02 wirenboard-AXDBEYA3 knxd[27926]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:19:02 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:19:02.823 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:19:02 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:19:02 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:19:02 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:19:03 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:19:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:19:08 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:19:09 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:19:10 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:19:12 wirenboard-AXDBEYA3 dhclient[4254]: DHCPREQUEST of 192.168.88.58 on eth0 to 192.168.88.1 port 67
Feb 03 14:19:12 wirenboard-AXDBEYA3 dhclient[4254]: DHCPACK of 192.168.88.58 from 192.168.88.1
Feb 03 14:19:12 wirenboard-AXDBEYA3 dnsmasq[1480]: reading /etc/resolv.conf
Feb 03 14:19:12 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 192.168.88.1#53
Feb 03 14:19:12 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 185.108.208.6#53
Feb 03 14:19:12 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 45.155.147.254#53
Feb 03 14:19:12 wirenboard-AXDBEYA3 dhclient[4254]: bound to 192.168.88.58 -- renewal in 271 seconds.
Feb 03 14:19:12 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:19:12 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:19:12 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:19:13 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:19:14 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:19:15 wirenboard-AXDBEYA3 knxd[27945]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:19:15 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:19:15.577 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:19:15 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:19:15 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:19:15 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:19:23 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:19:23 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:19:25 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:19:25 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:19:25 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:19:25 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:19:28 wirenboard-AXDBEYA3 knxd[27952]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:19:28 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:19:28.293 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:19:28 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:19:28 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:19:28 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:19:32 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:19:33 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:19:33 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:19:35 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:19:38 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:19:38 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:19:38 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:19:38 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:19:41 wirenboard-AXDBEYA3 knxd[27959]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:19:41 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:19:41.055 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:19:41 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:19:41 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:19:41 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:19:44 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:19:45 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:19:47 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:19:47 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:19:49 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:19:49 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:19:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:19:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:19:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:19:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:19:51 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:19:51 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:19:51 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:19:51 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:19:51 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:19:53 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:19:53 wirenboard-AXDBEYA3 knxd[27993]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:19:53 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:19:53.800 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:19:53 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:19:53 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:19:53 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:19:54 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:20:00 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:20:01 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:20:02 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:20:02 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:20:03 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:20:03 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:20:03 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:20:04 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:20:04 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:20:06 wirenboard-AXDBEYA3 sshd[28008]: rexec line 18: Deprecated option KeyRegenerationInterval
Feb 03 14:20:06 wirenboard-AXDBEYA3 sshd[28008]: rexec line 19: Deprecated option ServerKeyBits
Feb 03 14:20:06 wirenboard-AXDBEYA3 sshd[28008]: rexec line 30: Deprecated option RSAAuthentication
Feb 03 14:20:06 wirenboard-AXDBEYA3 sshd[28008]: rexec line 37: Deprecated option RhostsRSAAuthentication
Feb 03 14:20:06 wirenboard-AXDBEYA3 knxd[28006]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:20:06 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:20:06.551 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:20:06 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:20:06 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:20:06 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:20:07 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:20:08 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:20:08 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:20:09 wirenboard-AXDBEYA3 sshd[28008]: reprocess config line 30: Deprecated option RSAAuthentication
Feb 03 14:20:09 wirenboard-AXDBEYA3 sshd[28008]: reprocess config line 37: Deprecated option RhostsRSAAuthentication
Feb 03 14:20:09 wirenboard-AXDBEYA3 sshd[28008]: Invalid user root\\ from 31.134.188.93 port 18041
Feb 03 14:20:09 wirenboard-AXDBEYA3 sshd[28008]: input_userauth_request: invalid user root\\\\ [preauth]
Feb 03 14:20:11 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:20:12 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:20:12 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:20:14 wirenboard-AXDBEYA3 sshd[28008]: pam_unix(sshd:auth): check pass; user unknown
Feb 03 14:20:14 wirenboard-AXDBEYA3 sshd[28008]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=31.134.188.93
Feb 03 14:20:14 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:20:16 wirenboard-AXDBEYA3 sshd[28008]: Failed password for invalid user root\\ from 31.134.188.93 port 18041 ssh2
Feb 03 14:20:16 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:20:16 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:20:16 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:20:16 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:20:17 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:20:18 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:20:18 wirenboard-AXDBEYA3 sshd[28008]: Connection closed by 31.134.188.93 port 18041 [preauth]
Feb 03 14:20:19 wirenboard-AXDBEYA3 knxd[28019]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:20:19 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:20:19.371 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:20:19 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:20:19 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:20:19 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:20:29 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:20:29 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:20:29 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:20:29 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:20:32 wirenboard-AXDBEYA3 knxd[28027]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:20:32 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:20:32.042 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:20:32 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:20:32 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:20:32 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:20:32 wirenboard-AXDBEYA3 sshd[28034]: rexec line 18: Deprecated option KeyRegenerationInterval
Feb 03 14:20:32 wirenboard-AXDBEYA3 sshd[28034]: rexec line 19: Deprecated option ServerKeyBits
Feb 03 14:20:32 wirenboard-AXDBEYA3 sshd[28034]: rexec line 30: Deprecated option RSAAuthentication
Feb 03 14:20:32 wirenboard-AXDBEYA3 sshd[28034]: rexec line 37: Deprecated option RhostsRSAAuthentication
Feb 03 14:20:34 wirenboard-AXDBEYA3 sshd[28034]: reprocess config line 30: Deprecated option RSAAuthentication
Feb 03 14:20:34 wirenboard-AXDBEYA3 sshd[28034]: reprocess config line 37: Deprecated option RhostsRSAAuthentication
Feb 03 14:20:35 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:20:36 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:20:36 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:20:37 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:20:37 wirenboard-AXDBEYA3 sshd[28034]: Accepted password for root from 31.134.188.93 port 18147 ssh2
Feb 03 14:20:37 wirenboard-AXDBEYA3 sshd[28034]: pam_unix(sshd:session): session opened for user root by (uid=0)
Feb 03 14:20:37 wirenboard-AXDBEYA3 systemd-logind[353]: New session c2 of user root.
Feb 03 14:20:37 wirenboard-AXDBEYA3 systemd[1]: Created slice User Slice of root.
Feb 03 14:20:37 wirenboard-AXDBEYA3 systemd[1]: Started Session c2 of user root.
Feb 03 14:20:37 wirenboard-AXDBEYA3 systemd[1]: Starting User Manager for UID 0...
Feb 03 14:20:37 wirenboard-AXDBEYA3 systemd[28039]: pam_unix(systemd-user:session): session opened for user root by (uid=0)
Feb 03 14:20:37 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:20:38 wirenboard-AXDBEYA3 systemd[28039]: Reached target Timers.
Feb 03 14:20:38 wirenboard-AXDBEYA3 systemd[28039]: Reached target Sockets.
Feb 03 14:20:38 wirenboard-AXDBEYA3 systemd[28039]: Reached target Paths.
Feb 03 14:20:38 wirenboard-AXDBEYA3 systemd[28039]: Reached target Basic System.
Feb 03 14:20:38 wirenboard-AXDBEYA3 systemd[28039]: Reached target Default.
Feb 03 14:20:38 wirenboard-AXDBEYA3 systemd[28039]: Startup finished in 242ms.
Feb 03 14:20:38 wirenboard-AXDBEYA3 systemd[1]: Started User Manager for UID 0.
Feb 03 14:20:38 wirenboard-AXDBEYA3 sshd[28055]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory
Feb 03 14:20:38 wirenboard-AXDBEYA3 sshd[28055]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory
Feb 03 14:20:38 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:20:42 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:20:42 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:20:42 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:20:42 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:20:44 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:20:44 wirenboard-AXDBEYA3 knxd[28067]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:20:44 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:20:44 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:20:44.872 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:20:44 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:20:44 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:20:45 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:20:46 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:20:47 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:20:48 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:20:49 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:20:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:20:49 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:20:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:20:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:20:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:20:51 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:20:54 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:20:54 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:20:54 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:20:55 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:20:56 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:20:57 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:20:57 wirenboard-AXDBEYA3 knxd[28107]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:20:57 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:20:57.564 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:20:57 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:20:57 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:20:57 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:21:01 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:21:02 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:21:03 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:21:04 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:21:06 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:21:07 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:21:07 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:21:07 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:21:07 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:21:10 wirenboard-AXDBEYA3 knxd[28115]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:21:10 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:21:10.302 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:21:10 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:21:10 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:21:10 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:21:20 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:21:20 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:21:20 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:21:20 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:21:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:21:23 wirenboard-AXDBEYA3 knxd[28122]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:21:23 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:21:23.043 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:21:23 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:21:23 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:21:23 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:21:29 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:21:33 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:21:33 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:21:33 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:21:33 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:21:34 wirenboard-AXDBEYA3 sshd[28135]: rexec line 18: Deprecated option KeyRegenerationInterval
Feb 03 14:21:34 wirenboard-AXDBEYA3 sshd[28135]: rexec line 19: Deprecated option ServerKeyBits
Feb 03 14:21:34 wirenboard-AXDBEYA3 sshd[28135]: rexec line 30: Deprecated option RSAAuthentication
Feb 03 14:21:34 wirenboard-AXDBEYA3 sshd[28135]: rexec line 37: Deprecated option RhostsRSAAuthentication
Feb 03 14:21:34 wirenboard-AXDBEYA3 sshd[28135]: Did not receive identification string from 141.98.11.27 port 51964
Feb 03 14:21:35 wirenboard-AXDBEYA3 knxd[28133]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:21:35 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:21:35.801 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:21:35 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:21:35 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:21:35 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:21:37 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:21:41 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:21:44 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:21:45 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:21:45 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:21:45 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:21:46 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:21:48 wirenboard-AXDBEYA3 knxd[28141]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:21:48 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:21:48.543 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:21:48 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:21:48 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:21:48 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:21:48 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:21:49 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:21:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:21:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:21:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:21:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:21:50 wirenboard-AXDBEYA3 sshd[28171]: rexec line 18: Deprecated option KeyRegenerationInterval
Feb 03 14:21:50 wirenboard-AXDBEYA3 sshd[28171]: rexec line 19: Deprecated option ServerKeyBits
Feb 03 14:21:50 wirenboard-AXDBEYA3 sshd[28171]: rexec line 30: Deprecated option RSAAuthentication
Feb 03 14:21:50 wirenboard-AXDBEYA3 sshd[28171]: rexec line 37: Deprecated option RhostsRSAAuthentication
Feb 03 14:21:50 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:21:50 wirenboard-AXDBEYA3 sshd[28171]: reprocess config line 30: Deprecated option RSAAuthentication
Feb 03 14:21:50 wirenboard-AXDBEYA3 sshd[28171]: reprocess config line 37: Deprecated option RhostsRSAAuthentication
Feb 03 14:21:50 wirenboard-AXDBEYA3 sshd[28171]: Invalid user user from 141.98.11.27 port 43972
Feb 03 14:21:50 wirenboard-AXDBEYA3 sshd[28171]: input_userauth_request: invalid user user [preauth]
Feb 03 14:21:50 wirenboard-AXDBEYA3 sshd[28171]: pam_unix(sshd:auth): check pass; user unknown
Feb 03 14:21:50 wirenboard-AXDBEYA3 sshd[28171]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=141.98.11.27
Feb 03 14:21:50 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:21:51 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:21:52 wirenboard-AXDBEYA3 sshd[28171]: Failed password for invalid user user from 141.98.11.27 port 43972 ssh2
Feb 03 14:21:52 wirenboard-AXDBEYA3 sshd[28171]: Received disconnect from 141.98.11.27 port 43972:11: Normal Shutdown, Thank you for playing [preauth]
Feb 03 14:21:52 wirenboard-AXDBEYA3 sshd[28171]: Disconnected from 141.98.11.27 port 43972 [preauth]
Feb 03 14:21:58 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:21:58 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:21:58 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:21:58 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:21:58 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:21:58 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:22:01 wirenboard-AXDBEYA3 knxd[28184]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:22:01 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:22:01.296 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:22:01 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:22:01 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:22:01 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:22:02 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:22:03 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:22:04 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:22:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:22:07 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:22:11 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:22:11 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:22:11 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:22:11 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:22:11 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:22:14 wirenboard-AXDBEYA3 knxd[28191]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:22:14 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:22:14.098 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:22:14 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:22:14 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:22:14 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:22:19 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:22:20 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:22:23 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:22:24 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:22:24 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:22:24 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:22:24 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:22:26 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:22:26 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:22:26 wirenboard-AXDBEYA3 knxd[28202]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:22:26 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:22:26.804 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:22:26 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:22:26 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:22:26 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:22:27 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:22:32 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:22:33 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:22:34 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:22:34 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:22:36 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:22:36 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:22:36 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:22:37 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:22:37 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:22:39 wirenboard-AXDBEYA3 knxd[28209]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:22:39 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:22:39.544 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:22:39 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:22:39 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:22:39 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:22:43 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:22:44 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:22:44 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:22:45 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:22:46 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:22:46 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:22:47 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:22:49 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:22:49 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:22:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:22:49 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:22:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:22:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:22:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:22:50 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:22:50 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:22:52 wirenboard-AXDBEYA3 knxd[28232]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:22:52 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:22:52.700 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:22:52 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:22:52 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:22:52 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:22:52 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:23:02 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:23:02 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:23:02 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:23:02 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:23:03 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:23:03 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:23:03 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:23:04 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:23:04 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:23:05 wirenboard-AXDBEYA3 knxd[28256]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:23:05 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:23:05.551 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:23:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:23:05 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:23:05 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:23:05 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:23:06 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:23:06 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:23:08 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:23:09 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:23:09 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:23:10 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:23:11 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:23:11 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:23:12 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:23:14 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:23:15 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:23:15 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:23:15 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:23:15 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:23:15 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:23:16 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:23:18 wirenboard-AXDBEYA3 knxd[28264]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:23:18 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:23:18.304 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:23:18 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:23:18 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:23:18 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:23:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:23:28 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:23:28 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:23:28 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:23:28 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:23:28 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:23:30 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:23:31 wirenboard-AXDBEYA3 knxd[28271]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:23:31 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:23:31.103 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:23:31 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:23:31 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:23:31 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:23:34 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:23:37 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:23:41 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:23:41 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:23:41 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:23:41 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:23:43 wirenboard-AXDBEYA3 dhclient[4254]: DHCPREQUEST of 192.168.88.58 on eth0 to 192.168.88.1 port 67
Feb 03 14:23:43 wirenboard-AXDBEYA3 dhclient[4254]: DHCPACK of 192.168.88.58 from 192.168.88.1
Feb 03 14:23:43 wirenboard-AXDBEYA3 dnsmasq[1480]: reading /etc/resolv.conf
Feb 03 14:23:43 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 192.168.88.1#53
Feb 03 14:23:43 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 185.108.208.6#53
Feb 03 14:23:43 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 45.155.147.254#53
Feb 03 14:23:43 wirenboard-AXDBEYA3 dhclient[4254]: bound to 192.168.88.58 -- renewal in 230 seconds.
Feb 03 14:23:43 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:23:43 wirenboard-AXDBEYA3 knxd[28279]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:23:43 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:23:43.804 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:23:43 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:23:43 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:23:43 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:23:44 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:23:49 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:23:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:23:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:23:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:23:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:23:53 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:23:53 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:23:53 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:23:54 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:23:56 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:23:56 wirenboard-AXDBEYA3 knxd[28327]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:23:56 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:23:56.569 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:23:56 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:23:56 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:23:56 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:23:57 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:23:58 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:24:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:24:06 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:24:06 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:24:06 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:24:06 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:24:06 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:24:07 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:24:09 wirenboard-AXDBEYA3 knxd[28334]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:24:09 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:24:09.313 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:24:09 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:24:09 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:24:09 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:24:09 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:24:15 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:24:16 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:24:16 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:24:19 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:24:19 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:24:19 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:24:19 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:24:20 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:24:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:24:22 wirenboard-AXDBEYA3 knxd[28341]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:24:22 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:24:22 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:24:22.048 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:24:22 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:24:22 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:24:23 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:24:25 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:24:29 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:24:32 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:24:32 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:24:32 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:24:32 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:24:34 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:24:34 wirenboard-AXDBEYA3 knxd[28350]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:24:34 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:24:34.911 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:24:34 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:24:34 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:24:34 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:24:39 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:24:43 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:24:44 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:24:45 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:24:45 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:24:45 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:24:45 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:24:47 wirenboard-AXDBEYA3 knxd[28359]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:24:47 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:24:47.805 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:24:47 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:24:47 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:24:47 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:24:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:24:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:24:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:24:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:24:53 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:24:53 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:24:54 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:24:55 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:24:55 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:24:56 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:24:57 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:24:57 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:24:57 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:24:58 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:24:58 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:25:00 wirenboard-AXDBEYA3 knxd[28395]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:25:00 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:25:00.552 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:25:00 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:25:00 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:25:00 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:25:01 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:25:02 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:25:02 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:25:03 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:25:04 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:25:07 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:25:07 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:25:10 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:25:10 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:25:10 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:25:10 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:25:13 wirenboard-AXDBEYA3 knxd[28402]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:25:13 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:25:13.356 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:25:13 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:25:13 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:25:13 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:25:13 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:25:14 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:25:19 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:25:20 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:25:23 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:25:23 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:25:23 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:25:23 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:25:24 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:25:25 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:25:25 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:25:26 wirenboard-AXDBEYA3 knxd[28413]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:25:26 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:25:26.045 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:25:26 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:25:26 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:25:26 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:25:26 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:25:27 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:25:27 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:25:28 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:25:31 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:25:32 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:25:36 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:25:36 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:25:36 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:25:36 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:25:38 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:25:38 wirenboard-AXDBEYA3 knxd[28420]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:25:38 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:25:38.804 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:25:38 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:25:38 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:25:38 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:25:39 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:25:39 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:25:45 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:25:46 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:25:48 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:25:48 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:25:48 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:25:49 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:25:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:25:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:25:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:25:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:25:51 wirenboard-AXDBEYA3 knxd[28427]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:25:51 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:25:51.551 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:25:51 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:25:51 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:25:51 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:25:52 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:25:53 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:25:56 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:25:59 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:26:00 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:26:01 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:26:01 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:26:01 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:26:01 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:26:04 wirenboard-AXDBEYA3 knxd[28463]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:26:04 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:26:04.375 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:26:04 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:26:04 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:26:04 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:26:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:26:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:26:07 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:26:07 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:26:08 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:26:14 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:26:14 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:26:14 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:26:14 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:26:15 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:26:16 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:26:16 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:26:17 wirenboard-AXDBEYA3 knxd[28475]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:26:17 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:26:17.037 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:26:17 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:26:17 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:26:17 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:26:19 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:26:19 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:26:20 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:26:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:26:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:26:26 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:26:27 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:26:27 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:26:27 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:26:27 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:26:27 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:26:28 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:26:29 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:26:29 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:26:29 wirenboard-AXDBEYA3 knxd[28482]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:26:29 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:26:29.811 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:26:29 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:26:29 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:26:29 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:26:30 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:26:33 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:26:35 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:26:35 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:26:39 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:26:39 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:26:39 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:26:40 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:26:42 wirenboard-AXDBEYA3 knxd[28489]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:26:42 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:26:42.554 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:26:42 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:26:42 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:26:42 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:26:44 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:26:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:26:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:26:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:26:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:26:50 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:26:52 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:26:52 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:26:52 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:26:52 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:26:55 wirenboard-AXDBEYA3 knxd[28527]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:26:55 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:26:55.335 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:26:55 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:26:55 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:26:55 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:26:55 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:26:56 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:27:03 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:27:05 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:27:05 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:27:05 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:27:05 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:27:07 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:27:08 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:27:08 wirenboard-AXDBEYA3 knxd[28536]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:27:08 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:27:08.096 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:27:08 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:27:08 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:27:08 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:27:08 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:27:09 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:27:12 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:27:13 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:27:14 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:27:17 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:27:18 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:27:18 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:27:18 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:27:18 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:27:20 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:27:20 wirenboard-AXDBEYA3 knxd[28543]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:27:20 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:27:20 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:27:20.798 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:27:20 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:27:20 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:27:30 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:27:30 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:27:30 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:27:30 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:27:31 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:27:33 wirenboard-AXDBEYA3 dhclient[4254]: DHCPREQUEST of 192.168.88.58 on eth0 to 192.168.88.1 port 67
Feb 03 14:27:33 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:27:33.548 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:27:33 wirenboard-AXDBEYA3 knxd[28550]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:27:33 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:27:33 wirenboard-AXDBEYA3 dhclient[4254]: DHCPACK of 192.168.88.58 from 192.168.88.1
Feb 03 14:27:33 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:27:33 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:27:33 wirenboard-AXDBEYA3 dnsmasq[1480]: reading /etc/resolv.conf
Feb 03 14:27:33 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 192.168.88.1#53
Feb 03 14:27:33 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 185.108.208.6#53
Feb 03 14:27:33 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 45.155.147.254#53
Feb 03 14:27:33 wirenboard-AXDBEYA3 dhclient[4254]: bound to 192.168.88.58 -- renewal in 301 seconds.
Feb 03 14:27:39 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:27:40 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:27:43 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:27:43 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:27:43 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:27:43 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:27:46 wirenboard-AXDBEYA3 knxd[28569]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:27:46 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:27:46 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:27:46.294 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:27:46 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:27:46 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:27:48 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:27:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:27:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:27:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:27:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:27:52 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:27:54 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:27:54 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:27:56 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:27:56 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:27:56 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:27:56 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:27:58 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:27:59 wirenboard-AXDBEYA3 knxd[28605]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:27:59 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:27:59.051 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:27:59 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:27:59 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:27:59 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:28:04 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:28:04 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:28:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:28:06 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:28:08 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:28:08 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:28:09 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:28:09 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:28:09 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:28:09 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:28:11 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:28:11 wirenboard-AXDBEYA3 knxd[28612]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:28:11 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:28:11 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:28:11.841 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:28:11 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:28:11 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:28:13 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:28:16 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:28:18 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:28:19 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:28:21 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:28:21 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:28:21 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:28:22 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:28:22 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:28:24 wirenboard-AXDBEYA3 knxd[28620]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:28:24 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:28:24.542 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:28:24 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:28:24 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:28:24 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:28:25 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:28:25 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:28:26 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:28:27 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:28:28 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:28:30 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:28:34 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:28:34 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:28:34 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:28:34 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:28:36 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:28:37 wirenboard-AXDBEYA3 knxd[28632]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:28:37 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:28:37.296 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:28:37 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:28:37 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:28:37 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:28:38 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:28:40 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:28:42 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:28:42 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:28:43 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:28:47 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:28:47 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:28:47 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:28:47 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:28:49 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:28:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:28:50 wirenboard-AXDBEYA3 knxd[28639]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:28:50 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:28:50.049 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:28:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:28:50 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:28:50 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:28:50 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:28:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:28:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:28:58 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:29:00 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:29:00 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:29:00 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:29:00 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:29:00 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:29:02 wirenboard-AXDBEYA3 knxd[28675]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:29:02 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:29:02 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:29:02 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:29:02.861 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:29:02 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:29:02 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:29:04 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:29:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:29:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:29:08 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:29:09 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:29:10 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:29:12 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:29:12 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:29:12 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:29:12 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:29:13 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:29:13 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:29:14 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:29:14 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:29:15 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:29:15 wirenboard-AXDBEYA3 knxd[28686]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:29:15 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:29:15.565 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:29:15 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:29:15 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:29:15 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:29:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:29:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:29:25 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:29:25 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:29:25 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:29:25 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:29:25 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:29:28 wirenboard-AXDBEYA3 knxd[28694]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:29:28 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:29:28.291 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:29:28 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:29:28 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:29:28 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:29:30 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:29:32 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:29:34 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:29:35 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:29:37 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:29:38 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:29:38 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:29:38 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:29:38 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:29:38 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:29:39 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:29:41 wirenboard-AXDBEYA3 knxd[28701]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:29:41 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:29:41.059 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:29:41 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:29:41 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:29:41 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:29:45 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:29:46 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:29:48 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:29:49 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:29:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:29:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:29:49 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:29:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:29:51 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:29:51 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:29:51 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:29:51 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:29:51 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:29:52 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:29:53 wirenboard-AXDBEYA3 knxd[28735]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:29:53 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:29:53.800 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:29:53 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:29:53 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:29:53 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:29:54 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:29:55 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:29:57 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:30:03 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:30:03 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:30:03 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:30:04 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:30:06 wirenboard-AXDBEYA3 knxd[28748]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:30:06 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:30:06.593 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:30:06 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:30:06 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:30:06 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:30:06 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:30:15 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:30:16 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:30:16 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:30:16 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:30:16 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:30:19 wirenboard-AXDBEYA3 knxd[28755]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:30:19 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:30:19.293 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:30:19 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:30:19 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:30:19 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:30:19 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:30:20 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:30:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:30:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:30:27 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:30:29 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:30:29 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:30:29 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:30:29 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:30:31 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:30:32 wirenboard-AXDBEYA3 knxd[28762]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:30:32 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:30:32.046 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:30:32 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:30:32 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:30:32 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:30:32 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:30:37 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:30:38 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:30:42 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:30:42 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:30:42 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:30:42 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:30:44 wirenboard-AXDBEYA3 knxd[28771]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:30:44 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:30:44.846 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:30:44 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:30:44 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:30:44 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:30:46 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:30:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:30:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:30:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:30:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:30:50 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:30:51 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:30:53 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:30:54 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:30:54 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:30:54 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:30:55 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:30:57 wirenboard-AXDBEYA3 knxd[28809]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:30:57 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:30:57.574 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:30:57 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:30:57 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:30:57 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:30:58 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:31:00 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:31:07 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:31:07 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:31:07 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:31:07 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:31:07 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:31:09 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:31:10 wirenboard-AXDBEYA3 knxd[28816]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:31:10 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:31:10.321 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:31:10 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:31:10 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:31:10 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:31:12 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:31:14 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:31:17 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:31:19 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:31:20 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:31:20 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:31:20 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:31:20 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:31:20 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:31:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:31:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:31:23 wirenboard-AXDBEYA3 knxd[28823]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:31:23 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:31:23.085 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:31:23 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:31:23 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:31:23 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:31:23 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:31:25 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:31:26 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:31:27 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:31:29 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:31:31 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:31:32 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:31:33 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:31:33 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:31:33 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:31:33 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:31:33 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:31:34 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:31:35 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:31:35 wirenboard-AXDBEYA3 knxd[28834]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:31:35 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:31:35.798 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:31:35 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:31:35 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:31:35 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:31:43 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:31:45 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:31:45 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:31:45 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:31:46 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:31:48 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:31:48 wirenboard-AXDBEYA3 knxd[28842]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:31:48 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:31:48.572 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:31:48 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:31:48 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:31:48 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:31:48 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:31:49 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:31:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:31:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:31:50 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:31:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:31:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:31:50 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:31:52 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:31:54 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:31:56 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:31:57 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:31:58 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:31:58 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:31:58 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:31:58 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:31:58 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:32:01 wirenboard-AXDBEYA3 knxd[28878]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:32:01 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:32:01.347 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:32:01 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:32:01 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:32:01 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:32:02 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:32:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:32:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:32:08 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:32:10 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:32:11 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:32:11 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:32:11 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:32:11 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:32:11 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:32:13 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:32:14 wirenboard-AXDBEYA3 knxd[28885]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:32:14 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:32:14.072 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:32:14 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:32:14 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:32:14 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:32:14 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:32:17 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:32:19 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:32:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:32:22 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:32:24 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:32:24 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:32:24 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:32:24 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:32:26 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:32:26 wirenboard-AXDBEYA3 knxd[28896]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:32:26 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:32:26.808 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:32:26 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:32:26 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:32:26 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:32:27 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:32:28 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:32:34 wirenboard-AXDBEYA3 dhclient[4254]: DHCPREQUEST of 192.168.88.58 on eth0 to 192.168.88.1 port 67
Feb 03 14:32:34 wirenboard-AXDBEYA3 dhclient[4254]: DHCPACK of 192.168.88.58 from 192.168.88.1
Feb 03 14:32:34 wirenboard-AXDBEYA3 dnsmasq[1480]: reading /etc/resolv.conf
Feb 03 14:32:34 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 192.168.88.1#53
Feb 03 14:32:34 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 185.108.208.6#53
Feb 03 14:32:34 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 45.155.147.254#53
Feb 03 14:32:34 wirenboard-AXDBEYA3 dhclient[4254]: bound to 192.168.88.58 -- renewal in 285 seconds.
Feb 03 14:32:35 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:32:36 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:32:36 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:32:36 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:32:37 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:32:37 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:32:39 wirenboard-AXDBEYA3 knxd[28911]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:32:39 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:32:39.568 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:32:39 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:32:39 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:32:39 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:32:43 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:32:44 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:32:49 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:32:49 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:32:49 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:32:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:32:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:32:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:32:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:32:50 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:32:52 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:32:52 wirenboard-AXDBEYA3 knxd[28935]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:32:52 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:32:52.696 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:32:52 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:32:52 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:32:52 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:32:53 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:32:54 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:32:58 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:32:58 wirenboard-AXDBEYA3 sshd[28954]: rexec line 18: Deprecated option KeyRegenerationInterval
Feb 03 14:32:58 wirenboard-AXDBEYA3 sshd[28954]: rexec line 19: Deprecated option ServerKeyBits
Feb 03 14:32:58 wirenboard-AXDBEYA3 sshd[28954]: rexec line 30: Deprecated option RSAAuthentication
Feb 03 14:32:58 wirenboard-AXDBEYA3 sshd[28954]: rexec line 37: Deprecated option RhostsRSAAuthentication
Feb 03 14:32:59 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:32:59 wirenboard-AXDBEYA3 sshd[28954]: reprocess config line 30: Deprecated option RSAAuthentication
Feb 03 14:32:59 wirenboard-AXDBEYA3 sshd[28954]: reprocess config line 37: Deprecated option RhostsRSAAuthentication
Feb 03 14:32:59 wirenboard-AXDBEYA3 sshd[28954]: Invalid user system from 103.145.253.87 port 59188
Feb 03 14:32:59 wirenboard-AXDBEYA3 sshd[28954]: input_userauth_request: invalid user system [preauth]
Feb 03 14:32:59 wirenboard-AXDBEYA3 sshd[28954]: pam_unix(sshd:auth): check pass; user unknown
Feb 03 14:32:59 wirenboard-AXDBEYA3 sshd[28954]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=103.145.253.87
Feb 03 14:33:00 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:33:01 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:33:01 wirenboard-AXDBEYA3 sshd[28954]: Failed password for invalid user system from 103.145.253.87 port 59188 ssh2
Feb 03 14:33:01 wirenboard-AXDBEYA3 sshd[28954]: Connection closed by 103.145.253.87 port 59188 [preauth]
Feb 03 14:33:02 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:33:02 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:33:02 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:33:03 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:33:03 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:33:03 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:33:04 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:33:05 wirenboard-AXDBEYA3 knxd[28965]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:33:05 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:33:05.563 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:33:05 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:33:05 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:33:05 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:33:09 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:33:10 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:33:11 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:33:11 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:33:12 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:33:13 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:33:13 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:33:14 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:33:15 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:33:15 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:33:15 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:33:15 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:33:18 wirenboard-AXDBEYA3 knxd[28972]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:33:18 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:33:18.314 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:33:18 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:33:18 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:33:18 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:33:19 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:33:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:33:22 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:33:26 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:33:28 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:33:28 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:33:28 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:33:28 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:33:28 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:33:31 wirenboard-AXDBEYA3 knxd[28980]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:33:31 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:33:31 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:33:31.065 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:33:31 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:33:31 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:33:32 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:33:33 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:33:34 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:33:34 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:33:37 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:33:41 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:33:41 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:33:41 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:33:41 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:33:42 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:33:43 wirenboard-AXDBEYA3 knxd[28988]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:33:43 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:33:43.796 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:33:43 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:33:43 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:33:43 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:33:49 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:33:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:33:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:33:49 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:33:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:33:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:33:50 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:33:51 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:33:52 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:33:53 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:33:53 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:33:53 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:33:53 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:33:53 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:33:54 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:33:56 wirenboard-AXDBEYA3 knxd[29028]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:33:56 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:33:56.563 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:33:56 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:33:56 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:33:56 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:33:57 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:33:58 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:34:01 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:34:04 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:34:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:34:06 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:34:06 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:34:06 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:34:06 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:34:06 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:34:06 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:34:09 wirenboard-AXDBEYA3 knxd[29035]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:34:09 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:34:09.305 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:34:09 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:34:09 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:34:09 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:34:09 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:34:11 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:34:12 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:34:14 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:34:15 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:34:17 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:34:18 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:34:19 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:34:19 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:34:19 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:34:19 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:34:19 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:34:19 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:34:22 wirenboard-AXDBEYA3 knxd[29042]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:34:22 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:34:22.110 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:34:22 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:34:22 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:34:22 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:34:23 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:34:24 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:34:25 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:34:29 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:34:30 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:34:31 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:34:31 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:34:32 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:34:32 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:34:32 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:34:32 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:34:33 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:34:34 wirenboard-AXDBEYA3 knxd[29051]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:34:34 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:34:34.863 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:34:34 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:34:34 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:34:34 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:34:43 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:34:43 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:34:44 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:34:44 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:34:44 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:34:44 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:34:45 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:34:45 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:34:47 wirenboard-AXDBEYA3 knxd[29060]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:34:47 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:34:47.547 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:34:47 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:34:47 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:34:47 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:34:47 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:34:48 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:34:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:34:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:34:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:34:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:34:52 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:34:57 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:34:57 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:34:57 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:34:57 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:35:00 wirenboard-AXDBEYA3 knxd[29096]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:35:00 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:35:00.298 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:35:00 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:35:00 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:35:00 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:35:04 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:35:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:35:06 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:35:06 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:35:08 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:35:09 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:35:10 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:35:10 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:35:10 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:35:10 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:35:13 wirenboard-AXDBEYA3 knxd[29103]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:35:13 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:35:13.048 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:35:13 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:35:13 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:35:13 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:35:16 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:35:18 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:35:19 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:35:20 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:35:20 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:35:23 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:35:23 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:35:23 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:35:23 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:35:23 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:35:25 wirenboard-AXDBEYA3 knxd[29114]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:35:25 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:35:25.863 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:35:25 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:35:25 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:35:25 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:35:26 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:35:27 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:35:28 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:35:29 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:35:30 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:35:32 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:35:35 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:35:35 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:35:35 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:35:36 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:35:38 wirenboard-AXDBEYA3 knxd[29121]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:35:38 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:35:38.539 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:35:38 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:35:38 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:35:38 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:35:38 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:35:39 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:35:42 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:35:43 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:35:44 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:35:45 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:35:46 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:35:48 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:35:48 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:35:48 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:35:48 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:35:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:35:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:35:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:35:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:35:50 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:35:51 wirenboard-AXDBEYA3 knxd[29128]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:35:51 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:35:51.303 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:35:51 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:35:51 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:35:51 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:35:53 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:35:58 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:36:01 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:36:01 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:36:01 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:36:01 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:36:02 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:36:02 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:36:03 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:36:04 wirenboard-AXDBEYA3 knxd[29164]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:36:04 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:36:04.046 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:36:04 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:36:04 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:36:04 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:36:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:36:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:36:06 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:36:07 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:36:12 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:36:12 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:36:14 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:36:14 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:36:14 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:36:14 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:36:16 wirenboard-AXDBEYA3 knxd[29175]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:36:16 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:36:16.866 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:36:16 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:36:16 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:36:16 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:36:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:36:23 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:36:23 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:36:24 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:36:26 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:36:26 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:36:26 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:36:27 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:36:29 wirenboard-AXDBEYA3 knxd[29182]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:36:29 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:36:29.551 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:36:29 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:36:29 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:36:29 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:36:39 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:36:39 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:36:39 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:36:39 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:36:42 wirenboard-AXDBEYA3 knxd[29189]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:36:42 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:36:42.309 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:36:42 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:36:42 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:36:42 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:36:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:36:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:36:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:36:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:36:50 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:36:52 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:36:52 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:36:52 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:36:52 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:36:52 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:36:55 wirenboard-AXDBEYA3 knxd[29227]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:36:55 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:36:55.045 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:36:55 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:36:55 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:36:55 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:36:56 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:36:57 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:37:01 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:37:04 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:37:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:37:05 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:37:05 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:37:05 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:37:05 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:37:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:37:07 wirenboard-AXDBEYA3 knxd[29237]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:37:07 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:37:07.823 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:37:07 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:37:07 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:37:07 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:37:08 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:37:09 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:37:10 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:37:10 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:37:11 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:37:11 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:37:12 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:37:13 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:37:17 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:37:17 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:37:17 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:37:17 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:37:18 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:37:19 wirenboard-AXDBEYA3 dhclient[4254]: DHCPREQUEST of 192.168.88.58 on eth0 to 192.168.88.1 port 67
Feb 03 14:37:19 wirenboard-AXDBEYA3 dhclient[4254]: DHCPACK of 192.168.88.58 from 192.168.88.1
Feb 03 14:37:19 wirenboard-AXDBEYA3 dnsmasq[1480]: reading /etc/resolv.conf
Feb 03 14:37:19 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 192.168.88.1#53
Feb 03 14:37:19 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 185.108.208.6#53
Feb 03 14:37:19 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 45.155.147.254#53
Feb 03 14:37:19 wirenboard-AXDBEYA3 dhclient[4254]: bound to 192.168.88.58 -- renewal in 276 seconds.
Feb 03 14:37:20 wirenboard-AXDBEYA3 knxd[29245]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:37:20 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:37:20.591 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:37:20 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:37:20 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:37:20 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:37:22 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:37:22 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:37:24 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:37:25 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:37:30 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:37:30 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:37:30 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:37:30 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:37:33 wirenboard-AXDBEYA3 knxd[29260]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:37:33 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:37:33.337 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:37:33 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:37:33 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:37:33 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:37:35 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:37:40 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:37:42 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:37:43 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:37:43 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:37:43 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:37:43 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:37:44 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:37:46 wirenboard-AXDBEYA3 knxd[29271]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:37:46 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:37:46.050 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:37:46 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:37:46 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:37:46 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:37:46 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:37:47 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:37:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:37:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:37:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:37:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:37:54 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:37:54 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:37:55 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:37:56 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:37:56 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:37:56 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:37:56 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:37:58 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:37:58 wirenboard-AXDBEYA3 knxd[29307]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:37:58 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:37:58 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:37:58.829 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:37:58 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:37:58 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:38:00 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:38:01 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:38:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:38:06 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:38:08 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:38:08 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:38:08 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:38:09 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:38:10 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:38:11 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:38:11 wirenboard-AXDBEYA3 knxd[29314]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:38:11 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:38:11.546 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:38:11 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:38:11 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:38:11 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:38:12 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:38:13 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:38:14 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:38:14 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:38:15 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:38:15 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:38:17 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:38:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:38:21 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:38:21 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:38:21 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:38:21 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:38:24 wirenboard-AXDBEYA3 knxd[29321]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:38:24 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:38:24.350 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:38:24 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:38:24 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:38:24 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:38:32 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:38:32 wirenboard-AXDBEYA3 sshd[29332]: rexec line 18: Deprecated option KeyRegenerationInterval
Feb 03 14:38:32 wirenboard-AXDBEYA3 sshd[29332]: rexec line 19: Deprecated option ServerKeyBits
Feb 03 14:38:32 wirenboard-AXDBEYA3 sshd[29332]: rexec line 30: Deprecated option RSAAuthentication
Feb 03 14:38:32 wirenboard-AXDBEYA3 sshd[29332]: rexec line 37: Deprecated option RhostsRSAAuthentication
Feb 03 14:38:32 wirenboard-AXDBEYA3 sshd[29332]: Did not receive identification string from 46.19.139.18 port 45740
Feb 03 14:38:34 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:38:34 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:38:34 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:38:34 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:38:35 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:38:37 wirenboard-AXDBEYA3 knxd[29333]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:38:37 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:38:37.051 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:38:37 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:38:37 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:38:37 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:38:40 wirenboard-AXDBEYA3 sshd[29337]: rexec line 18: Deprecated option KeyRegenerationInterval
Feb 03 14:38:40 wirenboard-AXDBEYA3 sshd[29337]: rexec line 19: Deprecated option ServerKeyBits
Feb 03 14:38:40 wirenboard-AXDBEYA3 sshd[29337]: rexec line 30: Deprecated option RSAAuthentication
Feb 03 14:38:40 wirenboard-AXDBEYA3 sshd[29337]: rexec line 37: Deprecated option RhostsRSAAuthentication
Feb 03 14:38:40 wirenboard-AXDBEYA3 sshd[29337]: reprocess config line 30: Deprecated option RSAAuthentication
Feb 03 14:38:40 wirenboard-AXDBEYA3 sshd[29337]: reprocess config line 37: Deprecated option RhostsRSAAuthentication
Feb 03 14:38:40 wirenboard-AXDBEYA3 sshd[29337]: Invalid user user from 46.19.139.18 port 48360
Feb 03 14:38:40 wirenboard-AXDBEYA3 sshd[29337]: input_userauth_request: invalid user user [preauth]
Feb 03 14:38:40 wirenboard-AXDBEYA3 sshd[29337]: pam_unix(sshd:auth): check pass; user unknown
Feb 03 14:38:40 wirenboard-AXDBEYA3 sshd[29337]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=46.19.139.18
Feb 03 14:38:42 wirenboard-AXDBEYA3 sshd[29337]: Failed password for invalid user user from 46.19.139.18 port 48360 ssh2
Feb 03 14:38:42 wirenboard-AXDBEYA3 sshd[29337]: Received disconnect from 46.19.139.18 port 48360:11: Normal Shutdown, Thank you for playing [preauth]
Feb 03 14:38:42 wirenboard-AXDBEYA3 sshd[29337]: Disconnected from 46.19.139.18 port 48360 [preauth]
Feb 03 14:38:42 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:38:43 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:38:47 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:38:47 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:38:47 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:38:47 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:38:47 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:38:48 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:38:49 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:38:49 wirenboard-AXDBEYA3 knxd[29348]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:38:49 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:38:49.813 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:38:49 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:38:49 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:38:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:38:49 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:38:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:38:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:38:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:38:50 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:38:52 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:38:54 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:38:59 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:38:59 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:38:59 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:39:00 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:39:00 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:39:02 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:39:02 wirenboard-AXDBEYA3 knxd[29384]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:39:02 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:39:02.550 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:39:02 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:39:02 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:39:02 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:39:03 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:39:08 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:39:10 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:39:12 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:39:12 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:39:12 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:39:12 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:39:15 wirenboard-AXDBEYA3 knxd[29395]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:39:15 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:39:15 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:39:15.370 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:39:15 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:39:15 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:39:15 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:39:16 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:39:16 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:39:17 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:39:18 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:39:19 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:39:20 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:39:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:39:23 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:39:24 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:39:24 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:39:25 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:39:25 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:39:25 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:39:25 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:39:28 wirenboard-AXDBEYA3 knxd[29402]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:39:28 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:39:28.067 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:39:28 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:39:28 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:39:28 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:39:32 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:39:32 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:39:36 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:39:38 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:39:38 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:39:38 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:39:38 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:39:38 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:39:40 wirenboard-AXDBEYA3 knxd[29409]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:39:40 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:39:40.818 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:39:40 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:39:40 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:39:40 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:39:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:39:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:39:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:39:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:39:50 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:39:50 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:39:50 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:39:50 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:39:51 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:39:51 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:39:51 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:39:52 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:39:53 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:39:53 wirenboard-AXDBEYA3 knxd[29444]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:39:53 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:39:53.549 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:39:53 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:39:53 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:39:53 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:39:53 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:39:54 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:40:00 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:40:01 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:40:02 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:40:02 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:40:03 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:40:03 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:40:03 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:40:03 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:40:03 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:40:05 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:40:06 wirenboard-AXDBEYA3 knxd[29457]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:40:06 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:40:06.315 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:40:06 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:40:06 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:40:06 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:40:07 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:40:09 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:40:12 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:40:13 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:40:14 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:40:15 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:40:16 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:40:16 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:40:16 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:40:16 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:40:17 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:40:19 wirenboard-AXDBEYA3 knxd[29464]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:40:19 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:40:19.108 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:40:19 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:40:19 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:40:19 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:40:22 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:40:22 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:40:23 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:40:24 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:40:28 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:40:29 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:40:29 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:40:29 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:40:29 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:40:31 wirenboard-AXDBEYA3 knxd[29471]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:40:31 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:40:31.811 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:40:31 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:40:31 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:40:31 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:40:37 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:40:41 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:40:41 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:40:41 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:40:42 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:40:42 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:40:44 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:40:44 wirenboard-AXDBEYA3 knxd[29478]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:40:44 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:40:44.550 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:40:44 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:40:44 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:40:44 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:40:46 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:40:47 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:40:49 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:40:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:40:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:40:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:40:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:40:54 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:40:54 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:40:54 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:40:54 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:40:54 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:40:54 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:40:55 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:40:56 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:40:57 wirenboard-AXDBEYA3 knxd[29518]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:40:57 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:40:57.321 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:40:57 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:40:57 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:40:57 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:40:57 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:41:00 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:41:07 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:41:07 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:41:07 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:41:07 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:41:07 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:41:08 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:41:09 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:41:10 wirenboard-AXDBEYA3 knxd[29525]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:41:10 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:41:10.063 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:41:10 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:41:10 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:41:10 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:41:10 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:41:11 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:41:18 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:41:18 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:41:19 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:41:20 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:41:20 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:41:20 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:41:20 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:41:20 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:41:20 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:41:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:41:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:41:22 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:41:22 wirenboard-AXDBEYA3 knxd[29532]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:41:22 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:41:22.870 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:41:22 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:41:22 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:41:22 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:41:23 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:41:23 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:41:24 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:41:27 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:41:31 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:41:32 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:41:32 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:41:32 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:41:33 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:41:33 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:41:34 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:41:35 wirenboard-AXDBEYA3 knxd[29543]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:41:35 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:41:35.548 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:41:35 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:41:35 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:41:35 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:41:36 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:41:36 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:41:37 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:41:38 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:41:45 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:41:45 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:41:45 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:41:45 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:41:46 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:41:48 wirenboard-AXDBEYA3 knxd[29550]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:41:48 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:41:48 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:41:48.300 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:41:48 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:41:48 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:41:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:41:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:41:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:41:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:41:51 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:41:52 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:41:53 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:41:55 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:41:55 wirenboard-AXDBEYA3 dhclient[4254]: DHCPREQUEST of 192.168.88.58 on eth0 to 192.168.88.1 port 67
Feb 03 14:41:55 wirenboard-AXDBEYA3 dhclient[4254]: DHCPACK of 192.168.88.58 from 192.168.88.1
Feb 03 14:41:56 wirenboard-AXDBEYA3 dnsmasq[1480]: reading /etc/resolv.conf
Feb 03 14:41:56 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 192.168.88.1#53
Feb 03 14:41:56 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 185.108.208.6#53
Feb 03 14:41:56 wirenboard-AXDBEYA3 dnsmasq[1480]: using nameserver 45.155.147.254#53
Feb 03 14:41:56 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:41:56 wirenboard-AXDBEYA3 dhclient[4254]: bound to 192.168.88.58 -- renewal in 243 seconds.
Feb 03 14:41:58 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:41:58 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:41:58 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:41:58 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:41:59 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:42:01 wirenboard-AXDBEYA3 knxd[29594]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:42:01 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:42:01.059 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:42:01 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:42:01 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:42:01 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:42:01 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:42:09 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:42:11 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:42:11 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:42:11 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:42:11 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:42:13 wirenboard-AXDBEYA3 knxd[29601]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:42:13 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:42:13.791 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:42:13 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:42:13 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:42:13 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:42:13 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:42:14 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:42:20 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:42:20 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:42:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:42:23 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:42:23 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:42:23 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:42:24 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:42:24 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:42:26 wirenboard-AXDBEYA3 knxd[29613]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:42:26 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:42:26.539 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:42:26 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:42:26 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:42:26 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:42:28 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:42:31 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:42:32 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:42:32 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:42:34 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:42:36 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:42:36 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:42:36 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:42:36 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:42:36 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:42:37 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:42:38 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:42:39 wirenboard-AXDBEYA3 knxd[29621]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:42:39 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:42:39.304 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:42:39 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:42:39 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:42:39 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:42:48 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:42:49 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:42:49 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:42:49 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:42:49 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:42:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Ethernet 2 IP: failed to convert value '', passing raw
Feb 03 14:42:49 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/Wi-Fi 2 IP: failed to convert value '', passing raw
Feb 03 14:42:50 wirenboard-AXDBEYA3 wb-rules[2184]: Device "ppp0" does not exist.
Feb 03 14:42:50 wirenboard-AXDBEYA3 wb-rules[2184]: INFO: network/GPRS IP: failed to convert value '', passing raw
Feb 03 14:42:50 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:42:52 wirenboard-AXDBEYA3 knxd[29628]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:42:52 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:42:52.051 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:42:52 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:42:52 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:42:52 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:42:55 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:42:57 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:43:02 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:43:02 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:43:02 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:43:02 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:43:04 wirenboard-AXDBEYA3 knxd[29666]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:43:04 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:43:04.851 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:43:04 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:43:04 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:43:04 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:43:09 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:43:10 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:43:10 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:43:12 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:43:14 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:43:14 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:43:14 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:43:15 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:43:15 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:43:17 wirenboard-AXDBEYA3 knxd[29675]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:43:17 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:43:17.620 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:43:17 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:43:17 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:43:17 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:43:20 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2a: Serial protocol error: request timed out
Feb 03 14:43:21 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:43:27 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:43:27 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:43:27 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:43:27 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:43:30 wirenboard-AXDBEYA3 knxd[29682]: WirenboardKNX: F00000105: [19:A.ncn5120] Link down, terminating
Feb 03 14:43:30 wirenboard-AXDBEYA3 wb-mqtt-knx[862]: 2022-02-03 14:43:30.328 ERROR: Error in KNX loop: failed to read Busmonitor packet
Feb 03 14:43:30 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Main process exited, code=exited, status=1/FAILURE
Feb 03 14:43:30 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Unit entered failed state.
Feb 03 14:43:30 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Failed with result 'exit-code'.
Feb 03 14:43:31 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2b: Serial protocol error: request timed out
Feb 03 14:43:32 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2c: Serial protocol error: request timed out
Feb 03 14:43:32 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:43:38 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out
Feb 03 14:43:40 wirenboard-AXDBEYA3 systemd[1]: knxd.service: Service hold-off time over, scheduling restart.
Feb 03 14:43:40 wirenboard-AXDBEYA3 systemd[1]: Stopped KNX Daemon.
Feb 03 14:43:40 wirenboard-AXDBEYA3 systemd[1]: Starting KNX Daemon...
Feb 03 14:43:40 wirenboard-AXDBEYA3 systemd[1]: Started KNX Daemon.
Feb 03 14:43:42 wirenboard-AXDBEYA3 wb-mqtt-serial[2231]: WARNING: [modbus] failed to read 1 holding(s) @ 8 of device modbus:0x2d: Serial protocol error: request timed out