=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2022.09.25 01:41:58 =~=~=~=~=~=~=~=~=~=~=~= U-Boot SPL 2021.10-wb1.1.2-g0aab62b564 (Jul 27 2022 - 09:27:30 +0000) DRAM init ok, rows:15, ncs:1, size: 512MB .p0_mpdgctrl0= 0x010a0109 .p0_mpdgctrl1= 0x0e3f0e3f .p0_mprddlctl= 0x3f3f3d3f .p0_mpwrdlctl= 0x3f3f3731 .p0_mpwldectrl0= 0x00090009 .p0_mpwldectrl1= 0x000a000a Trying to boot from MMC1 Warning - USDHC2 controller not supporting U-Boot 2021.10-wb1.1.2-g0aab62b564 (Jul 27 2022 - 09:27:30 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 53C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 1 In: serial Out: serial Err: serial Loading Environment from MMC... OK Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd otp_program otp_aes_program ## Info: input data size = 43 = 0x2B bootcount=0 mmcpart=3 upgrade_available=0 Environment size: 43/8188 bytes ## Resetting to default environment ## Info: input data size = 43 = 0x2B Net: Could not get PHY for FEC0: addr 0 No ethernet found. Hit any key to stop autoboot: 3 2 1 0 Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... Bus usb@2184000: USB EHCI 1.00 Bus usb@2184200: USB EHCI 1.00 scanning bus usb@2184000 for devices... U-Boot SPL 2021.10-wb1.1.2-g0aab62b564 (Jul 27 2022 - 09:27:30 +0000) DRAM init ok, rows:15, ncs:1, size: 512MB .p0_mpdgctrl0= 0x01090107 .p0_mpdgctrl1= 0x0e3f0e3f .p0_mprddlctl= 0x3f3f3d3f .p0_mpwrdlctl= 0x3f3f3731 .p0_mpwldectrl0= 0x00090009 .p0_mpwldectrl1= 0x000a000a Trying to boot from MMC1 Warning - USDHC2 controller not supporting U-Boot 2021.10-wb1.1.2-g0aab62b564 (Jul 27 2022 - 09:27:30 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 53C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 1 In: serial Out: serial Err: serial Loading Environment from MMC... OK Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd otp_program otp_aes_program ## Info: input data size = 43 = 0x2B bootcount=0 mmcpart=3 upgrade_available=0 Environment size: 43/8188 bytes ## Resetting to default environment ## Info: input data size = 43 = 0x2B Net: Could not get PHY for FEC0: addr 0 No ethernet found. Hit any key to stop autoboot: 3 2 1 0 Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... Bus usb@2184000: USB EHCI 1.00 Bus usb@2184200: USB EHCI 1.00 scanning bus usb@2184000 for devices... 1 USB Device(s) found scanning bus usb@2184200 for devices... EHCI timed out on TD - token=0x80008d80 USB device not accepting new address (error=22) 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found No storage devices, perhaps not 'usb start'ed..? No USB update detected, continuing boot switch to partitions #0, OK mmc1(part 0) is current device SD/MMC found on device 1 323 bytes read in 3 ms (104.5 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 5899184 bytes read in 257 ms (21.9 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt imx6ul-wirenboard690 47104 bytes read in 5 ms (9 MiB/s) 485 bytes read in 3 ms (157.2 KiB/s) Applying DT overlay wb6-nogsm 597 bytes read in 4 ms (145.5 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu 509 bytes read in 4 ms (124 KiB/s) Applying DT overlay wb6-noradio 334 bytes read in 3 ms (108.4 KiB/s) Applying DT overlay wb6-eth1 254 bytes read in 3 ms (82 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x82000000 [ 0x000000 - 0x5a03b0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 9ef78000, end 9ef9afff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb116 (jenkins@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 6.3.0-18) 6.3.0 20170516, GNU ld (GNU Binutils for Debian) 2.28) #1 Wed Jul 6 16:10:09 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 6.9.0 (i.MX6UL/ULL) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait ro [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 489384K/524288K available (8192K kernel code, 714K rwdata, 2680K rodata, 1024K init, 272K bss, 18520K reserved, 16384K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x238/0x3d4 with crng_init=0 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000019] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000065] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002859] Console: colour dummy device 80x30 [ 0.002926] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002964] pid_max: default: 32768 minimum: 301 [ 0.003397] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.003432] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.005021] CPU: Testing write buffer coherency: ok [ 0.006117] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.007009] devtmpfs: initialized [ 0.025278] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.025809] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.025858] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.027233] pinctrl core: initialized pinctrl subsystem [ 0.029288] NET: Registered protocol family 16 [ 0.031613] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.033672] thermal_sys: Registered thermal governor 'step_wise' [ 0.033963] cpuidle: using governor menu [ 0.233728] vdd1p1: supplied by regulator-dummy [ 0.246579] vdd3p0: supplied by regulator-dummy [ 0.259487] cpu: supplied by regulator-dummy [ 0.272404] vddsoc: supplied by regulator-dummy [ 0.635835] No ATAGs? [ 0.635898] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.635922] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.636536] debugfs: Directory 'dummy-iomuxc-gpr@20e4000' with parent 'regmap' already present! [ 0.637185] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.638617] imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000 [ 0.638658] imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl driver [ 0.679795] mxs-dma 1804000.dma-apbh: initialized [ 0.685199] SCSI subsystem initialized [ 0.685723] usbcore: registered new interface driver usbfs [ 0.685852] usbcore: registered new interface driver hub [ 0.685966] usbcore: registered new device driver usb [ 0.686801] gpio-48 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.686947] gpio-49 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.688286] i2c-gpio i2c_rtc: using lines 48 (SDA) and 49 (SCL) [ 0.689214] gpio-76 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.689349] gpio-67 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.689960] i2c-gpio i2c_eeprom1: using lines 76 (SDA) and 67 (SCL) [ 0.690674] gpio-70 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.690809] gpio-71 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.691419] i2c-gpio i2c_eeprom2: using lines 70 (SDA) and 71 (SCL) [ 0.692985] gpio-30 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.693349] i2c i2c-1: IMX I2C adapter registered [ 0.694186] mc: Linux media interface: v0.10 [ 0.694306] videodev: Linux video capture interface: v2.00 [ 0.694491] pps_core: LinuxPPS API ver. 1 registered [ 0.694518] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.694579] PTP clock support registered [ 0.695215] Advanced Linux Sound Architecture Driver Initialized. [ 0.697357] clocksource: Switched to clocksource mxc_timer1 [ 0.715409] NET: Registered protocol family 2 [ 0.716603] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.716719] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.716838] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.716947] TCP: Hash tables configured (established 4096 bind 4096) [ 0.717150] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.717204] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.717718] NET: Registered protocol family 1 [ 0.718669] RPC: Registered named UNIX socket transport module. [ 0.718706] RPC: Registered udp transport module. [ 0.718725] RPC: Registered tcp transport module. [ 0.718742] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.719936] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.722824] Initialise system trusted keyrings [ 0.723270] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.735097] NFS: Registering the id_resolver key type [ 0.735188] Key type id_resolver registered [ 0.735209] Key type id_legacy registered [ 0.736115] Key type asymmetric registered [ 0.736151] Asymmetric key parser 'x509' registered [ 0.736252] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.736279] io scheduler mq-deadline registered [ 0.736300] io scheduler kyber registered [ 0.748526] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.748577] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.752557] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 21, base_baud = 5000000) is a IMX [ 1.415387] printk: console [ttymxc0] enabled [ 1.421916] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59, base_baud = 5000000) is a IMX [ 1.465769] imx_rngc 2284000.rng: Freescale RNGB registered (HW revision 2.129) [ 1.473208] random: fast init done [ 1.477153] random: crng init done [ 1.516740] brd: module loaded [ 1.534636] loop: module loaded [ 1.538253] at24 5-0050: supply vcc not found, using dummy regulator [ 1.549699] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.556667] at24 6-0050: supply vcc not found, using dummy regulator [ 1.568102] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.580625] libphy: Fixed MDIO Bus: probed [ 1.698047] pps pps0: new PPS source ptp0 [ 1.704494] libphy: fec_enet_mii_bus: probed [ 1.713328] fec 20b4000.ethernet ethFEC0: registered PHC device 0 [ 1.838071] pps pps1: new PPS source ptp1 [ 1.878743] libphy: fec_enet_mii_bus: probed [ 1.884034] fec 2188000.ethernet ethFEC1: registered PHC device 1 [ 1.891147] PPP generic driver version 2.4.2 [ 1.895868] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.902517] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.908282] usbcore: registered new interface driver usb-storage [ 1.914546] usbcore: registered new interface driver usbserial_generic [ 1.921235] usbserial: USB Serial support registered for generic [ 1.982960] rtc-pcf8563 4-0051: registered as rtc0 [ 1.999800] rtc-pcf8563 4-0051: setting system clock to 2022-09-24T22:42:35 UTC (1664059355) [ 2.018680] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc1 [ 2.025127] i2c /dev entries driver [ 2.032055] lm75 4-0048: supply vs not found, using dummy regulator [ 2.043703] lm75 4-0048: hwmon0: sensor 'lm75b' [ 2.164095] sdhci: Secure Digital Host Controller Interface driver [ 2.170384] sdhci: Copyright(c) Pierre Ossman [ 2.174758] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.188739] ledtrig-cpu: registered to indicate activity on CPUs [ 2.196544] usbcore: registered new interface driver usbhid [ 2.202224] usbhid: USB HID core driver [ 2.218787] NET: Registered protocol family 10 [ 2.223363] mmc0: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 2.233325] Segment Routing with IPv6 [ 2.237865] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.245843] NET: Registered protocol family 17 [ 2.250675] Key type dns_resolver registered [ 2.259458] registered taskstats version 1 [ 2.263638] Loading compiled-in X.509 certificates [ 2.285983] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 2.297936] of_cfs_init [ 2.300686] of_cfs_init: OK [ 2.308510] ALSA device list: [ 2.311515] No soundcards found. [ 2.315225] Waiting for root device /dev/mmcblk0p3... [ 2.324922] mmc0: new DDR MMC card at address 0001 [ 2.330654] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 2.335556] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 2.342005] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 2.348337] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB, chardev (245:0) [ 2.358898] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.384596] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem [ 2.392008] EXT4-fs (mmcblk0p3): write access will be enabled during recovery [ 2.571353] EXT4-fs (mmcblk0p3): recovery complete [ 2.579823] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.588121] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 2.596171] devtmpfs: mounted [ 2.604808] Freeing unused kernel memory: 1024K [ 2.610292] Run /sbin/init as init process [ 2.946599] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.965461] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 3.008412] systemd[1]: Set hostname to . [ 3.494001] systemd[1]: [/lib/systemd/system/wb-mqtt-w1.service:10] Unknown lvalue 'StartLimitIntervalSec' in section 'Service' [ 3.632026] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 3.668316] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 3.730610] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 3.768833] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 3.808514] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 3.848311] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Reached target Remote File Systems. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on Syslog Socket. [ OK ] Created slice System Slice. Mounting POSIX Message Queue File System... Starting Create list of required stce nodes for the current kernel... Starting Load Kernel Modules... [ OK ] Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-serial\x2dgetty.slice. Mounting Debug File System... Starting File System Check on Root Device... [ OK ] Reached target Slices. [ OK ] Created slice system-getty.slice. Mounting /sys/kernel/config... Starting Journal Service... [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Encrypted Volumes. [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted /sys/kernel/config. [ OK ] Started Create list of required stavice nodes for the current kernel. [ OK ] Started Load Kernel Modules. [ OK ] Started File System Check on Root Device. [ OK ] Started Journal Service. [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 4.781904] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro Starting Create Static Device Nodes in /dev... [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Apply Kernel Variables. Starting prepare partitions at first boot... Starting Load/Save Random Seed... Starting udev Coldplug all Devices... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Load/Save Random Seed. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. [ OK ] Started prepare partitions at first boot. [ OK ] Reached target Local File Systems (Pre). [ 6.629236] Driver for 1-wire Dallas network protocol. [ OK ] Started udev Coldplug all Devices. [ 6.681686] gpio-68 (onewire_w1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 6.723533] gpio-11 (onewire_w2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ OK ] Found device /dev/ttymxc0. [ 6.983886] fec 20b4000.ethernet eth1: renamed from ethFEC0 [ 7.335466] imx_usb 2184000.usb: No over current polarity defined [ 7.386164] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 7.407565] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 7.436888] fec 2188000.ethernet eth0: renamed from ethFEC1 [ 7.488424] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 7.537664] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 7.545992] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.553268] usb usb1: Product: EHCI Host Controller [ 7.558177] usb usb1: Manufacturer: Linux 5.10.35-wb116 ehci_hcd [ 7.564189] usb usb1: SerialNumber: ci_hdrc.0 [ 7.843283] hub 1-0:1.0: USB hub found [ 7.892056] hub 1-0:1.0: 1 port detected [ 7.997532] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 8.002484] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 8.077518] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 8.126302] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 8.134676] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.141939] usb usb2: Product: EHCI Host Controller [ 8.146824] usb usb2: Manufacturer: Linux 5.10.35-wb116 ehci_hcd [ 8.152855] usb usb2: SerialNumber: ci_hdrc.1 [ 8.287522] usb usb1-port1: over-current condition [ 8.298300] hub 2-0:1.0: USB hub found [ 8.328691] hub 2-0:1.0: 1 port detected [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/mmcblk0p6. [ 8.717501] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 8.938117] usb 2-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 8.946384] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Starting File System Check on /dev/mmcblk0p6... [ 9.016532] hub 2-1:1.0: USB hub found [ 9.035388] hub 2-1:1.0: 4 ports detected Activating swap /dev/mmcblk0p5... [ 9.113956] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SS [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ OK ] Started File System Check on /dev/mmcblk0p6. [ 9.377480] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc Mounting /mnt/data... [ 9.465603] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /mnt/data. Mounting /var/log... [ 9.569610] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00 [ 9.578067] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.585407] usb 2-1.1: Product: 802.11n WLAN Adapter [ 9.590426] usb 2-1.1: Manufacturer: Realtek [ 9.594703] usb 2-1.1: SerialNumber: 00e04c000001 [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Raise network interfaces... Starting prepare mounts and symlinks to config files... [ OK ] Started ifup for eth0. Starting Flush Journal to Persistent Storage... [ 9.873321] Bluetooth: Core ver 2.22 [ 9.882751] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.917601] NET: Registered protocol family 31 [ 9.922072] Bluetooth: HCI device and connection manager initialized [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 9.992262] Bluetooth: HCI socket layer initialized [ 10.044521] Bluetooth: L2CAP socket layer initialized [ 10.065690] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 10.087558] Bluetooth: SCO socket layer initialized [ 10.105621] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 10.154508] systemd-journald[107]: Received request to flush runtime journal from PID 1 Starting Load/Save RF Kill Switch Status... [ 10.190291] cfg80211: failed to load regulatory.db [ 10.204209] usbcore: registered new interface driver btusb [ 10.211741] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 10.221709] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 10.227806] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 10.236805] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 10.243397] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 10.252708] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 10.323460] systemd-journald[107]: File /var/log/journal/2778fff92b203689d1255acd631b4f98/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Started Load/Save RF Kill Switch Status. [ 11.108973] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ OK ] Started Flush Journal to Persistent Storage. [ 11.370627] RTL871X: module init start [ 11.374443] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 [ 11.381476] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ 11.705502] RTL871X: rtw_ndev_init(wlan0) [ 11.729765] RTL871X: rtw_ndev_init(wlan1) [ 11.766497] usbcore: registered new interface driver rtl8723bu [ 11.772446] RTL871X: module init ret=0 [ 11.965221] usbcore: registered new interface driver rtl8xxxu [ OK ] Started Raise network interfaces. [ OK ] Started prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Reached target System Time Synchronized. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Started Monitor directories with device templates for wb-mqtt-serial. [ OK ] Reached target Paths. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting System Logging Service... Starting Login Service... [ OK ] Started Generates wb-mqtt-serial UI schema for wb-mqtt-confed. Starting initialize filesystems at first boot... [ OK ] Started Cgroup management daemon. Starting Mosquitto MQTT v3.1/v3.1.1 Broker... Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started watch config files. [ 14.347757] new mount options do not match the existing superblock, will be ignored Starting Initialize Wiren Board Device Tree overlays... Starting Restore local date from Wiren Board GSM RTC... Starting Restore /etc/resolv.conf ifore the ppp link was shut down... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Bluetooth service. [ OK ] Reached target Bluetooth. [ 15.404605] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.410038] Bluetooth: BNEP filters: protocol multicast [ 15.452191] Bluetooth: BNEP socket layer initialized [ OK ] Started System Logging Service. [ OK ] Started Restore /etc/resolv.conf ifbefore the ppp link was shut down. [ OK ] Started Mosquitto MQTT v3.1/v3.1.1 Broker. [ OK ] Started Login Service. Starting Hostname Service... [ OK ] Started Wiren Board firmware update service. Starting Wiren Board MQTT to Modbus TCP gateway... Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started initialize filesystems at first boot. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Reached target Network. Starting KNX Daemon... Starting Permit User Sessions... Starting A high performance web server and a reverse proxy server... Starting OpenBSD Secure Shell server... [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Permit User Sessions. [ OK ] Started KNX Daemon. [ OK ] Started Wiren Board MQTT to OPC UA gateway. [ OK ] Started Hostname Service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Reached target Network is Online. Starting LSB: Start NTP daemon... Starting LSB: Brings up/down network automatically... [ OK ] Started Serial Getty on ttymxc0. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ 20.099132] process '/sbin/netplugd' started with executable stack [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started LSB: Start NTP daemon. Starting Compensation of[ 20.407722] SMSC LAN8710/LAN8720 20b4000.ethernet-1:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=20b4000.ethernet-1:00, irq=POLL) systime inevice-tree (with opposite sign)... [ 20.737666] SMSC LAN8710/LAN8720 20b4000.ethernet-1:01: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=20b4000.ethernet-1:01, irq=POLL) [ OK ] Started Compensation of systime in device-tree (with opposite sign). [ OK ] Started A high performance web server and a reverse proxy server. Starting Initialize Wiren Board on successful boot... [ OK ] Started LSB: Brings up/down network automatically. Debian GNU/Linux 9 wirenboard-AS5ZAELU ttymxc0 wirenboard-AS5ZAELU login: root Password: [ 35.166489] RTL871X: RTW_ADAPTIVITY_EN_ [ 35.166514] AUTO, chplan:0x20, Regulation:3,3 [ 35.174832] RTL871X: RTW_ADAPTIVITY_MODE_ [ 35.174837] NORMAL [ 36.309506] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 224, base_baud = 5000000) is a IMX Last login: Sat Sep 24 22:35:50 UTC 2022 on ttymxc0 _ _ _ __ _(_)_ __ ___ _ __ | |__ ___ __ _ _ __ __| | \ \ /\ / / | '__/ _ \ '_ \| '_ \ / _ \ / _` | '__/ _` | \ V V /| | | | __/ | | | |_) | (_) | (_| | | | (_| | \_/\_/ |_|_| \___|_| |_|_.__/ \___/ \__,_|_| \__,_| Welcome to Wiren Board 6.9.1 (s/n AS5ZAELU), release wb-2207 (as stable) Linux wirenboard-AS5ZAELU 5.10.35-wb116 #1 Wed Jul 6 16:10:09 UTC 2022 armv7l GNU/Linux [ 38.350251] 2288000.serial: ttymxc7 at MMIO 0x2288000 (irq = 225, base_baud = 5000000) is a IMX [ 38.808713] RTL871X: nolinked power save enter root@wirenboard-AS5ZAELU:~# [ 40.467707] RTL871X: RTW_ADAPTIVITY_EN_ [ 40.467729] AUTO, chplan:0x20, Regulation:3,3 [ 40.475960] RTL871X: RTW_ADAPTIVITY_MODE_ [ 40.475965] NORMAL [ 41.733284] RTL871X: nolinked power save leave [ 44.199587] RTL871X: nolinked power save enter [ 45.490583] RTL871X: RTW_ADAPTIVITY_EN_ [ 45.490632] AUTO, chplan:0x20, Regulation:3,3 [ 45.498900] RTL871X: RTW_ADAPTIVITY_MODE_ [ 45.498904] NORMAL [ 46.753409] RTL871X: nolinked power save leave [ 46.992224] RTL871X: rtw_set_802_11_connect(wlan0) fw_state=0x00000008 [ 47.100971] RTL871X: start auth [ 47.105854] RTL871X: auth success, start assoc [ 47.117784] RTL871X: rtw_cfg80211_indicate_connect(wlan0) BSS not found !! [ 47.124760] RTL871X: assoc success [ 48.113439] RTL871X: send eapol packet [ 48.129583] RTL871X: send eapol packet [ 48.139016] RTL871X: set pairwise key camid:4, addr:78:81:02:f4:c8:52, kid:0, type:AES [ 48.155228] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 48.181996] RTL871X: set group key camid:5, addr:78:81:02:f4:c8:52, kid:1, type:AES root@wirenboard-AS5ZAELU:~# cat /etc/network/interfaces auto lo iface lo inet loopback auto ppp0 iface ppp0 inet ppp provider mts pre-up wb-gsm restart_if_broken pre-up sleep 15 auto wlan0 iface wlan0 inet dhcp wpa-ssid "MGTS_GPON_3524" wpa-psk "2MWW5QMJ" auto eth0 allow-hotplug eth0 iface eth0 inet dhcp pre-up wb-set-mac hostname IQnergy root@wirenboard-AS5ZAELU:~# root@wirenboard-AS5ZAELU:~# root@wirenboard-AS5ZAELU:~# ifconfig eth0: flags=4099 mtu 1500 ether e8:eb:1b:3a:2a:f0 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth1: flags=4099 mtu 1500 ether e8:eb:1b:3a:9a:3e txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 1353 bytes 133171 (130.0 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1353 bytes 133171 (130.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlan0: flags=4163 mtu 1500 inet 192.168.1.79 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fd81:2f4:c850:1:f2c8:14ff:fe48:d68f prefixlen 64 scopeid 0x0 inet6 2a00:1370:8186:1579:f2c8:14ff:fe48:d68f prefixlen 64 scopeid 0x0 inet6 fe80::f2c8:14ff:fe48:d68f prefixlen 64 scopeid 0x20 ether f0:c8:14:48:d6:8f txqueuelen 1000 (Ethernet) RX packets 52 bytes 7410 (7.2 KiB) RX errors 0 dropped 52 overruns 0 frame 0 TX packets 70 bytes 13833 (13.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@wirenboard-AS5ZAELU:~# wb-gsm restart_if_broken [ 90.017483] usb 2-1.3: new high-speed USB device number 4 using ci_hdrc [ 90.172758] usb 2-1.3: New USB device found, idVendor=1286, idProduct=812a, bcdDevice= 0.00 [ 90.181504] usb 2-1.3: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 90.189128] usb 2-1.3: Product: WUKONG [ 90.192928] usb 2-1.3: Manufacturer: MARVELL [ 90.488300] usb 2-1.3: USB disconnect, device number 4 [ 96.667476] usb 2-1.3: new high-speed USB device number 5 using ci_hdrc [ 96.828104] usb 2-1.3: config 1 has an invalid interface number: 5 but max is 4 [ 96.835478] usb 2-1.3: config 1 has no interface number 3 [ 96.855986] usb 2-1.3: New USB device found, idVendor=1e0e, idProduct=9011, bcdDevice= 1.00 [ 96.864430] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 96.871856] usb 2-1.3: Product: Mobile Composite Device Bus [ 96.877563] usb 2-1.3: Manufacturer: Marvell [ 96.881842] usb 2-1.3: SerialNumber: 200806006809080000 [ 96.970018] usbcore: registered new interface driver cdc_ether [ 97.017246] usbcore: registered new interface driver option [ 97.025620] usbserial: USB Serial support registered for GSM modem (1-port) [ 102.148089] rndis_host 2-1.3:1.0: rndis media connect [ 102.209164] rndis_host 2-1.3:1.0 usb0: register 'rndis_host' at usb-ci_hdrc.1-1.3, RNDIS device, 02:52:07:f1:cd:2a [ 102.224743] option 2-1.3:1.2: GSM modem (1-port) converter detected [ 102.238101] usbcore: registered new interface driver rndis_host [ 102.245831] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 102.284448] option 2-1.3:1.4: GSM modem (1-port) converter detected [ 102.291959] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 102.311395] option 2-1.3:1.5: GSM modem (1-port) converter detected [ 102.326776] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB2 root@wirenboard-AS5ZAELU:~# root@wirenboard-AS5ZAELU:~# root@wirenboard-AS5ZAELU:~# echo $WB_GPIO_GSM_SIMSELECT root@wirenboard-AS5ZAELU:~# ifconfig eth0: flags=4099 mtu 1500 ether e8:eb:1b:3a:2a:f0 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth1: flags=4099 mtu 1500 ether e8:eb:1b:3a:9a:3e txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 4999 bytes 397314 (388.0 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 4999 bytes 397314 (388.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlan0: flags=4163 mtu 1500 inet 192.168.1.79 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fd81:2f4:c850:1:f2c8:14ff:fe48:d68f prefixlen 64 scopeid 0x0 inet6 2a00:1370:8186:1579:f2c8:14ff:fe48:d68f prefixlen 64 scopeid 0x0 inet6 fe80::f2c8:14ff:fe48:d68f prefixlen 64 scopeid 0x20 ether f0:c8:14:48:d6:8f txqueuelen 1000 (Ethernet) RX packets 501 bytes 59650 (58.2 KiB) RX errors 0 dropped 63 overruns 0 frame 0 TX packets 468 bytes 93669 (91.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@wirenboard-AS5ZAELU:~# service networking restart root@wirenboard-AS5ZAELU:~# [ 148.649706] RTL871X: nolinked power save enter root@wirenboard-AS5ZAELU:~# ifconfig eth1: flags=4099 mtu 1500 ether e8:eb:1b:3a:9a:3e txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 6834 bytes 523798 (511.5 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 6834 bytes 523798 (511.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlan0: flags=4099 mtu 1500 ether f0:c8:14:48:d6:8f txqueuelen 1000 (Ethernet) RX packets 564 bytes 65799 (64.2 KiB) RX errors 0 dropped 64 overruns 0 frame 0 TX packets 521 bytes 102163 (99.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@wirenboard-AS5ZAELU:~# [ 168.182578] RTL871X: RTW_ADAPTIVITY_EN_ [ 168.182605] AUTO, chplan:0x20, Regulation:3,3 [ 168.190899] RTL871X: RTW_ADAPTIVITY_MODE_ [ 168.190905] NORMAL [ 168.973517] RTL871X: nolinked power save leave [ 170.795163] PPP BSD Compression module registered [ 170.835389] PPP Deflate Compression module registered [ 171.329091] RTL871X: nolinked power save enter [ 172.439704] RTL871X: RTW_ADAPTIVITY_EN_ [ 172.439731] AUTO, chplan:0x20, Regulation:3,3 [ 172.448001] RTL871X: RTW_ADAPTIVITY_MODE_ [ 172.448008] NORMAL [ 173.156892] RTL871X: nolinked power save leave [ 173.388177] RTL871X: rtw_set_802_11_connect(wlan0) fw_state=0x00000008 [ 173.669040] RTL871X: start auth [ 173.674041] RTL871X: auth success, start assoc [ 173.686070] RTL871X: rtw_cfg80211_indicate_connect(wlan0) BSS not found !! [ 173.693080] RTL871X: assoc success [ 173.708367] RTL871X: send eapol packet [ 173.721762] RTL871X: send eapol packet [ 173.739078] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 173.948269] RTL871X: set pairwise key camid:4, addr:78:81:02:f4:c8:52, kid:0, type:AES [ 173.966470] RTL871X: set group key camid:5, addr:78:81:02:f4:c8:52, kid:1, type:AES root@wirenboard-AS5ZAELU:~# ifconfig eth1: flags=4099 mtu 1500 ether e8:eb:1b:3a:9a:3e txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 7580 bytes 575328 (561.8 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 7580 bytes 575328 (561.8 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ppp0: flags=4305 mtu 1500 inet 11.147.116.198 netmask 255.255.255.255 destination 10.64.64.64 ppp txqueuelen 3 (Point-to-Point Protocol) RX packets 21 bytes 1278 (1.2 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 24 bytes 1469 (1.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlan0: flags=4163 mtu 1500 inet 192.168.1.79 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fd81:2f4:c850:1:f2c8:14ff:fe48:d68f prefixlen 64 scopeid 0x0 inet6 2a00:1370:8186:1579:f2c8:14ff:fe48:d68f prefixlen 64 scopeid 0x0 inet6 fe80::f2c8:14ff:fe48:d68f prefixlen 64 scopeid 0x20 ether f0:c8:14:48:d6:8f txqueuelen 1000 (Ethernet) RX packets 51 bytes 73033 (71.3 KiB) RX errors 0 dropped 101 overruns 0 frame 0 TX packets 88 bytes 127150 (124.1 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 [ 180.988367] SMSC LAN8710/LAN8720 20b4000.ethernet-1:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=20b4000.ethernet-1:00, irq=POLL) collisions 0 root@wirenboard-AS5ZAELU:~# ping google.com -I ppp-0 0 PING google.com (74.125.131.139) from 11.147.116.198 ppp0: 56(84) bytes of data. 64 bytes from lu-in-f139.1e100.net (74.125.131.139): icmp_seq=1 ttl=103 time=965 ms 64 bytes from lu-in-f139.1e100.net (74.125.131.139): icmp_seq=2 ttl=103 time=395 ms 64 bytes from lu-in-f139.1e100.net (74.125.131.139): icmp_seq=3 ttl=103 time=672 ms 64 bytes from lu-in-f139.1e100.net (74.125.131.139): icmp_seq=4 ttl=103 time=80.9 ms 64 bytes from lu-in-f139.1e100.net (74.125.131.139): icmp_seq=5 ttl=103 time=69.3 ms ^C --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4002ms rtt min/avg/max/mdev = 69.350/436.857/965.550/346.034 ms root@wirenboard-AS5ZAELU:~# root@wirenboard-AS5ZAELU:~# root@wirenboard-AS5ZAELU:~# ping google.com -I ppp0ifconfigservice networking restartifconfigecho $WB_GPIO_GSM_SIMSELECTwb-gsm restart_if_brokenecho $WB_GPIO_GSM_SIMSELECT root@wirenboard-AS5ZAELU:~# root@wirenboard-AS5ZAELU:~#