apt list --upgradable
Listing... Done
wb-homeui-backend/testing,testing 2.191.0 all [upgradable from: 2.189.1]
wb-hwconf-manager/testing,testing 1.71.2 all [upgradable from: 1.71.1]
wb-mqtt-homeui/testing,testing 2.191.0 all [upgradable from: 2.189.1]
wb-mqtt-serial/testing 2.232.3 arm64 [upgradable from: 2.232.1]
wb-release-info/testing,testing 1.0-testing~wb8+bullseye~20260327231901 all [upgradable from: 1.0-testing~wb8+bullseye~20260325091637]
wb-scenarios/testing,testing 1.8.0 all [upgradable from: 1.7.9]

journalctl -b

Mar 28 16:25:20 wirenboard-AL2VKR5E mosquitto[4104727]: 1774704320: Client wb-modbus closed its connection.
Mar 28 16:25:20 wirenboard-AL2VKR5E systemd[1]: wb-mqtt-serial.service: Main process exited, code=killed, status=4/ILL
Mar 28 16:25:20 wirenboard-AL2VKR5E systemd[1]: wb-mqtt-serial.service: Failed with result 'signal'.
Mar 28 16:25:20 wirenboard-AL2VKR5E systemd[1]: wb-mqtt-serial.service: Consumed 17.295s CPU time.
Mar 28 16:25:21 wirenboard-AL2VKR5E systemd[1]: wb-mqtt-serial.service: Scheduled restart job, restart counter is at 1.
Mar 28 16:25:21 wirenboard-AL2VKR5E systemd[1]: Stopped MQTT Driver for serial devices.
Mar 28 16:25:21 wirenboard-AL2VKR5E systemd[1]: wb-mqtt-serial.service: Consumed 17.295s CPU time.
Mar 28 16:25:21 wirenboard-AL2VKR5E systemd[1]: Starting MQTT Driver for serial devices...
Mar 28 16:25:21 wirenboard-AL2VKR5E systemd[1]: Started MQTT Driver for serial devices.
Mar 28 16:25:21 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-AUX-1-MB-B' (from file >
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-CG-VRF-MB-B' (from file>
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-DK-1-MB-B' (from file />
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-DK-5-MB-B' (from file />
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-GR-1-MB-B' (from file />
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-GR-3-MB-B' (from file />
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-GR-P3-MB-B' (from file >
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-HR-1-MB-B' (from file />
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-HS-3-MB-B' (from file />
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-HS-5-MB-B' (from file />
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-HS-6-MB-B' (from file />
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-HT-1-MB-B' (from file />
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-MD-1-MB-B' (from file />
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-MD-3-MB-B' (from file />
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-MD-VRF-MB-B' (from file>
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-ME-1-MB-B' (from file />
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-MH-2-MB-B' (from file />
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-TCL-1-MB-B' (from file >
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-TCL-3-MB-B' (from file >
Mar 28 16:25:22 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [templates] Existing template data for device type 'ONOKOM-AIR-TCL-6-MB-B' (from file >
Mar 28 16:25:23 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquit>
Mar 28 16:25:23 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] UNIX socket exists, using it for connection
Mar 28 16:25:24 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:24] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
Mar 28 16:25:24 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial config] "WB-MAO4 19" channel "Supply voltage" override property "enabled"
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial config] "WB-MAP3E fw2 184" channel "NN energy L1" override property "enabled"
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial config] "WB-MAP3E fw2 184" channel "NN energy L2" override property "enabled"
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial config] "WB-MAP3E fw2 184" channel "NN energy L3" override property "enabled"
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial config] "WB-UPS v.3 91" channel "MCU Temperature" override property "enabled"
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial config] "WB-UPS v.3 91" channel "MCU Voltage" override property "enabled"
Mar 28 16:25:25 wirenboard-AL2VKR5E mosquitto[4104727]: 1774704325: New connection from /var/run/mosquitto/mosquitto.sock:0 on port 0.
Mar 28 16:25:25 wirenboard-AL2VKR5E mosquitto[4104727]: 1774704325: New client connected from /var/run/mosquitto/mosquitto.sock:0 as wb-modbus (p2, c0, k60).
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] connection estabilished with code "0" <success>
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 4)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 32)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 63)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 64)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 91)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 122)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 123)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 138)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 145)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 152)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 159)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 166)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 167)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 182)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 189)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-db[2019]: WARNING: [conventions] converting empty value to boolean "false"
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 196)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 203)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 210)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 211)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 333)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 341)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 348)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 356)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 363)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 371)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 378)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 386)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 393)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 394)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 408)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 415)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 424)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 433)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 442)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 449)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 458)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 465)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 474)
Mar 28 16:25:25 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:25] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 547)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 548)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 562)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 571)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 580)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 587)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 596)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 605)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 678)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 679)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 693)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 702)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 711)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 718)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 727)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 736)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 809)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 810)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 824)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 833)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 842)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 849)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 858)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 867)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 940)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 941)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 955)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 964)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 973)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 980)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 989)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 998)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1071)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1072)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1086)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1095)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1104)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1111)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1120)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1129)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1196)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1197)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1211)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1220)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1229)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1236)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1245)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1254)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1321)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1322)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1336)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1345)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1354)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1361)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1370)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1379)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1446)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1447)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1569)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1577)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1584)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1592)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1599)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1607)
Mar 28 16:25:25 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1614)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1622)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1629)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1630)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1752)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1760)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1767)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1775)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1782)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1790)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1797)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1805)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1812)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1813)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1827)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1834)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1841)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1848)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1855)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1862)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1869)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1870)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1884)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1891)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1898)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1905)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1912)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1919)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1926)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1927)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1941)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1948)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1955)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1962)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1969)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1976)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1983)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 1984)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2022)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2035)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2120)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2121)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2195)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2202)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2215)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2222)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2229)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2230)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2231)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2269)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2282)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2367)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2368)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2442)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2449)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2462)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2469)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2476)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2483)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2484)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2558)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2565)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2578)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2585)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2592)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2599)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2600)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2902)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2909)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 2910)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-db[2019]: INFO: [dblogger] Group data limit is reached: group all, row count 102001, limit 100000
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3212)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3219)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3220)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3633)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3634)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3727)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3728)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3809)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3810)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3891)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3892)
Mar 28 16:25:26 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:26] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3973)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3974)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3978)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3980)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3982)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3984)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3986)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3988)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3990)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3992)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3994)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3997)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 3999)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 4001)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [mqtt] subscription succeeded (message id 4003)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 10]
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud Rate": <modbus:10:holding: 110><-- 1152 (0x480)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Short Press": <modbus:10:holding: 584><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Short Press": <modbus:10:holding: 585><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Short Press": <modbus:10:holding: 588><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Long Press": <modbus:10:holding: 648><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Long Press": <modbus:10:holding: 649><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Long Press": <modbus:10:holding: 652><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Output K1": <modbus:10:holding: 930><-- 1 (0x1)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Output K2": <modbus:10:holding: 931><-- 1 (0x1)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer Behaviour": <modbus:10:holding: 952><-- 1 (0x1)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer": <modbus:10:holding: 8264><-- 2 (0x2)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device dooya:0x0101 is connected
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer": <modbus:10:holding: 8272><-- 2 (0x2)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer": <modbus:10:holding: 8280><-- 2 (0x2)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer": <modbus:10:holding: 8288><-- 2 (0x2)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer": <modbus:10:holding: 8296><-- 2 (0x2)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:10 is connected
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:10:coil: 0>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:10:coil: 1>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:10:coil: 2>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:10:coil: 3>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:10:discrete: 0>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:10:discrete: 1>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:10:discrete: 2>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:10:discrete: 3>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:10:discrete: 4>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:10:input: 32>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:10:input: 33>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:10:input: 34>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:10:input: 35>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:10:input: 36>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:10: reboot>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device dooya:0x0102 is connected
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 102]
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:102:holding: 110><-- 1152 (0x480)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:102:holding: 416><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:102:holding: 417><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:102:holding: 418><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:102:holding: 419><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:102:holding: 1000><-- 12297 (0x3009)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:102:holding: 1001><-- 36878 (0x900e)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:102:holding: 1002><-- 12291 (0x3003)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:102:holding: 1020><-- 45072 (0xb010)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:102:holding: 1021><-- 36878 (0x900e)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:102:holding: 1022><-- 45059 (0xb003)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Dimmer Mode": <modbus:102:holding: 4000><-- 256 (0x100)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:102 is connected
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:102:coil: 3>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:102:coil: 9>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:102:coil: 10>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:102:discrete: 0>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:102:discrete: 1>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:102:discrete: 2>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:102:discrete: 3>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:102:holding: 2003>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:102:holding: 2015>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:102:holding: 2016>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:102:holding: 2017>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:102:input: 32>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:102:input: 33>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:102:input: 34>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:102:input: 35>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:102: reboot>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 228]
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 110]
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:228:holding: 276><-- 1 (0x1)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:110:holding: 110><-- 1152 (0x480)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:110:holding: 416><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:110:holding: 417><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:110:holding: 418><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:110:holding: 419><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:110:holding: 1000><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:110:holding: 1001><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:110:holding: 1002><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:110:holding: 1020><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:110:holding: 1021><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:110:holding: 1022><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Dimmer Mode": <modbus:110:holding: 4000><-- 34 (0x22)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:110 is connected
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 1 ID": <modbus:228:holding: 5632><-- 68600077864 (0x>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 2 ID": <modbus:228:holding: 5636><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 3 ID": <modbus:228:holding: 5640><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 4 ID": <modbus:228:holding: 5644><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 5 ID": <modbus:228:holding: 5648><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 6 ID": <modbus:228:holding: 5652><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 7 ID": <modbus:228:holding: 5656><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 8 ID": <modbus:228:holding: 5660><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 9 ID": <modbus:228:holding: 5664><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 10 ID": <modbus:228:holding: 5668><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 11 ID": <modbus:228:holding: 5672><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 12 ID": <modbus:228:holding: 5676><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 13 ID": <modbus:228:holding: 5680><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 14 ID": <modbus:228:holding: 5684><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 15 ID": <modbus:228:holding: 5688><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 16 ID": <modbus:228:holding: 5692><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 17 ID": <modbus:228:holding: 5696><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 18 ID": <modbus:228:holding: 5700><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 19 ID": <modbus:228:holding: 5704><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 20 ID": <modbus:228:holding: 5708><-- 0 (0x0)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:110:coil: 7>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:110:coil: 8>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:110:discrete: 0>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:110:discrete: 1>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:110:discrete: 2>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:110:discrete: 3>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:110:holding: 2007>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:110:holding: 2008>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:110:holding: 2009>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:110:holding: 2010>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:110:input: 32>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:110:input: 33>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:110:input: 34>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:110:input: 35>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:110: reboot>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 111]
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud Rate": <modbus:111:holding: 110><-- 1152 (0x480)
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:111 is connected
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:111:input: 0>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:111:input: 1>
Mar 28 16:25:26 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:111: reboot>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:228 is connected
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 114]
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud Rate": <modbus:114:holding: 110><-- 1152 (0x480)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:114 is connected
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:114:input: 0>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:114:input: 1>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:114: reboot>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:228:discrete: 1>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:228:input: 278>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:228:input: 465>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:228:input: 481>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:228: reboot>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 13]
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Outputs Mode": <modbus:13:holding: 10><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:13:holding: 110><-- 1152 (0x480)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Voltage at 1% dimming level (mV)": <modbus:13:holding: 912>>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Voltage at 1% dimming level (mV)": <modbus:13:holding: 913>>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Voltage at 1% dimming level (mV)": <modbus:13:holding: 914>>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Voltage at 1% dimming level (mV)": <modbus:13:holding: 915>>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:13 is connected
Mar 28 16:25:27 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:27] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:coil: 16>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:coil: 17>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:coil: 18>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:coil: 19>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:holding: 16>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:holding: 17>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:holding: 18>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:holding: 19>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:input: 32>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:input: 33>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:input: 34>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:input: 464>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:input: 465>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:input: 466>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:input: 480>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:input: 481>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:input: 482>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:input: 496>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:input: 497>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:input: 498>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:input: 512>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:input: 513>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:13:input: 514>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:13: reboot>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 136]
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:136:holding: 9><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:136:holding: 10><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:136:holding: 11><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:136:holding: 12><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:136:holding: 13><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:136:holding: 14><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:136:holding: 15><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:136:holding: 16><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E telegraf-exec[4106043]: Metrics sent. http status=204 data size in bytes=1166
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:136:holding: 110><-- 1152 (0x480)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:136 is connected
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:discrete: 0>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:discrete: 1>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:discrete: 2>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:discrete: 3>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:discrete: 4>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:discrete: 5>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:discrete: 6>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:discrete: 7>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 60>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 62>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 64>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 66>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 68>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 70>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 72>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 74>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 464>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 465>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 466>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 467>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 468>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 469>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 470>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 471>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 480>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 481>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 482>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 483>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 484>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 485>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 486>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 487>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 496>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 497>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 498>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 499>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 500>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 501>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 502>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 503>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 512>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 513>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 514>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 515>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 516>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 517>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 518>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:136:input: 519>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:136: reboot>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 170]
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Outputs Mode": <modbus:170:holding: 10><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:170:holding: 110><-- 1152 (0x480)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Voltage at 1% dimming level (mV)": <modbus:170:holding: 912>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Voltage at 1% dimming level (mV)": <modbus:170:holding: 913>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Voltage at 1% dimming level (mV)": <modbus:170:holding: 914>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Voltage at 1% dimming level (mV)": <modbus:170:holding: 915>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:170 is connected
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:coil: 16>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:coil: 17>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:coil: 18>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:coil: 19>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:holding: 16>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:holding: 17>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:holding: 18>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:holding: 19>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:input: 32>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:input: 33>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:input: 34>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:input: 464>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:input: 465>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:input: 466>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:input: 480>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:input: 481>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:input: 482>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:input: 496>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:input: 497>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:input: 498>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:input: 512>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:input: 513>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:170:input: 514>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:170: reboot>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 233]
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 175]
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:233:holding: 276><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "disable legacy input mode control": <modbus:175:holding: 5>>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:175:holding: 9><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:175:holding: 10><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:175:holding: 110><-- 1152 (0x480)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:175 is connected
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 1 ID": <modbus:233:holding: 5632><-- 68584562472 (0x>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 2 ID": <modbus:233:holding: 5636><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 3 ID": <modbus:233:holding: 5640><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 4 ID": <modbus:233:holding: 5644><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 5 ID": <modbus:233:holding: 5648><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 6 ID": <modbus:233:holding: 5652><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 7 ID": <modbus:233:holding: 5656><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 8 ID": <modbus:233:holding: 5660><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 9 ID": <modbus:233:holding: 5664><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 10 ID": <modbus:233:holding: 5668><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 11 ID": <modbus:233:holding: 5672><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 12 ID": <modbus:233:holding: 5676><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 13 ID": <modbus:233:holding: 5680><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 14 ID": <modbus:233:holding: 5684><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 15 ID": <modbus:233:holding: 5688><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 16 ID": <modbus:233:holding: 5692><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 17 ID": <modbus:233:holding: 5696><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 18 ID": <modbus:233:holding: 5700><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 19 ID": <modbus:233:holding: 5704><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Sensor 20 ID": <modbus:233:holding: 5708><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:175:coil: 0>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:175:coil: 1>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:175:discrete: 0>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:175:discrete: 1>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:175:input: 32>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:175:input: 33>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:175: reboot>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 176]
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:176:holding: 110><-- 1152 (0x480)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:176:holding: 416><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:176:holding: 417><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:176:holding: 418><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:176:holding: 419><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:176:holding: 1000><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:176:holding: 1001><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:176:holding: 1002><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:176:holding: 1020><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:176:holding: 1021><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:176:holding: 1022><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Dimmer Mode": <modbus:176:holding: 4000><-- 34 (0x22)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:176 is connected
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:176:coil: 7>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:176:coil: 8>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:176:discrete: 0>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:176:discrete: 1>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:176:discrete: 2>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:176:discrete: 3>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:176:holding: 2007>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:176:holding: 2008>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:176:holding: 2009>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:176:holding: 2010>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:176:input: 32>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:176:input: 33>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:176:input: 34>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:176:input: 35>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:176: reboot>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 181]
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:181:holding: 110><-- 1152 (0x480)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:181:holding: 416><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:181:holding: 417><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:181:holding: 418><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:181:holding: 419><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:181:holding: 1000><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:181:holding: 1001><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:181:holding: 1002><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:181:holding: 1020><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:181:holding: 1021><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:181:holding: 1022><-- 0 (0x0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Dimmer Mode": <modbus:181:holding: 4000><-- 34 (0x22)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:181 is connected
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:181:coil: 7>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:181:coil: 8>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:181:discrete: 0>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:181:discrete: 1>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:181:discrete: 2>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:181:discrete: 3>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:181:holding: 2007>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:181:holding: 2008>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:181:holding: 2009>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:181:holding: 2010>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:181:input: 32>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:181:input: 33>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:181:input: 34>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:181:input: 35>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:181: reboot>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:233 is connected
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 183]
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:183:holding: 9><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:183:holding: 10><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:183:holding: 11><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:183:holding: 12><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:183:holding: 13><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:183:holding: 14><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:183:holding: 15><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:183:holding: 16><-- 1 (0x1)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:183:holding: 110><-- 1152 (0x480)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:183 is connected
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:233:discrete: 1>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:233:input: 278>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:233:input: 465>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:233:input: 481>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:233: reboot>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:discrete: 0>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:discrete: 1>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:discrete: 2>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:discrete: 3>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:discrete: 4>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:discrete: 5>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:discrete: 6>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:discrete: 7>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 60>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 62>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 64>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 66>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 68>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 70>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 72>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 74>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 464>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 465>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 466>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 467>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 468>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 469>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 470>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 471>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 480>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 481>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 482>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 483>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 484>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 485>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 486>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 487>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 496>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 497>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 498>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 499>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 500>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 501>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 502>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 503>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 512>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 513>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 514>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 515>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 516>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 517>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 518>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:183:input: 519>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:183: reboot>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 184]
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:184:holding: 110><-- 1152 (0x480)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Turns L1": <modbus:184:holding: 5216><-- 2000 (0x7d0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Turns L2": <modbus:184:holding: 5217><-- 2000 (0x7d0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Turns L3": <modbus:184:holding: 5218><-- 2000 (0x7d0)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Phi L1": <modbus:184:holding: 5219><-- 120 (0x78)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Phi L2": <modbus:184:holding: 5220><-- 120 (0x78)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Phi L3": <modbus:184:holding: 5221><-- 120 (0x78)
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Current Transformer Reverse L2": <modbus:184:holding: 5297>>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:184 is connected
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:184:input: 5136>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:184:input: 5138>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:184:input: 5140>
Mar 28 16:25:27 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:184: reboot>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 19]
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Outputs Mode": <modbus:19:holding: 10><-- 1 (0x1)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:19:holding: 110><-- 1152 (0x480)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Action": <modbus:19:holding: 664><-- 1 (0x1)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Action": <modbus:19:holding: 665><-- 1 (0x1)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Action": <modbus:19:holding: 666><-- 1 (0x1)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Action": <modbus:19:holding: 667><-- 1 (0x1)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Voltage at 1% dimming level (mV)": <modbus:19:holding: 912>>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Voltage at 1% dimming level (mV)": <modbus:19:holding: 913>>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Voltage at 1% dimming level (mV)": <modbus:19:holding: 914>>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Voltage at 1% dimming level (mV)": <modbus:19:holding: 915>>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Dimming level decrement rate (ms/%)": <modbus:19:holding: 9>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:19 is connected
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:coil: 16>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:coil: 17>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:coil: 18>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:coil: 19>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:holding: 16>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:holding: 17>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:holding: 18>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:holding: 19>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:input: 32>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:input: 33>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:input: 34>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:input: 464>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:input: 465>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:input: 466>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:input: 480>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:input: 481>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:input: 482>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:input: 496>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:input: 497>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:input: 498>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:input: 512>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:input: 513>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:19:input: 514>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:19: reboot>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 190]
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:190:holding: 110><-- 1152 (0x480)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:190:holding: 416><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:190:holding: 417><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:190:holding: 418><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:190:holding: 419><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:190:holding: 1000><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:190:holding: 1001><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:190:holding: 1002><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:190:holding: 1020><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:190:holding: 1021><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:190:holding: 1022><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Dimmer Mode": <modbus:190:holding: 4000><-- 34 (0x22)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:190 is connected
Mar 28 16:25:28 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:28] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:190:coil: 7>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:190:coil: 8>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:190:discrete: 0>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:190:discrete: 1>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:190:discrete: 2>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:190:discrete: 3>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:190:holding: 2007>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:190:holding: 2008>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:190:holding: 2009>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:190:holding: 2010>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:190:input: 32>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:190:input: 33>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:190:input: 34>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:190:input: 35>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:190: reboot>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 194]
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:194:holding: 110><-- 1152 (0x480)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:194:holding: 416><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:194:holding: 417><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:194:holding: 418><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:194:holding: 419><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:194:holding: 1000><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:194:holding: 1001><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:194:holding: 1002><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:194:holding: 1020><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:194:holding: 1021><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:194:holding: 1022><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Dimmer Mode": <modbus:194:holding: 4000><-- 34 (0x22)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:194 is connected
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:194:coil: 7>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:194:coil: 8>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:194:discrete: 0>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:194:discrete: 1>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:194:discrete: 2>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:194:discrete: 3>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:194:holding: 2007>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:194:holding: 2008>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:194:holding: 2009>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:194:holding: 2010>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:194:input: 32>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:194:input: 33>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:194:input: 34>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:194:input: 35>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:194: reboot>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 195]
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:195:holding: 110><-- 1152 (0x480)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:195:holding: 416><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:195:holding: 417><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:195:holding: 418><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:195:holding: 419><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:195:holding: 1000><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:195:holding: 1001><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:195:holding: 1002><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:195:holding: 1020><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:195:holding: 1021><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:195:holding: 1022><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Dimmer Mode": <modbus:195:holding: 4000><-- 34 (0x22)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:195 is connected
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:195:coil: 7>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:195:coil: 8>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:195:discrete: 0>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:195:discrete: 1>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:195:discrete: 2>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:195:discrete: 3>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:195:holding: 2007>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:195:holding: 2008>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:195:holding: 2009>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:195:holding: 2010>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:195:input: 32>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:195:input: 33>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:195:input: 34>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:195:input: 35>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:195: reboot>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 197]
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "disable legacy input mode control": <modbus:197:holding: 5>>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:197:holding: 9><-- 1 (0x1)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Mode": <modbus:197:holding: 10><-- 1 (0x1)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:197:holding: 110><-- 1152 (0x480)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:197 is connected
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:197:coil: 0>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:197:coil: 1>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:197:discrete: 0>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:197:discrete: 1>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:197:input: 32>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:197:input: 33>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:197: reboot>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 199]
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:199:holding: 110><-- 1152 (0x480)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:199:holding: 416><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:199:holding: 417><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:199:holding: 418><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Input Mode": <modbus:199:holding: 419><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:199:holding: 1000><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:199:holding: 1001><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "sp_title": <modbus:199:holding: 1002><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:199:holding: 1020><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:199:holding: 1021><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "lp_title": <modbus:199:holding: 1022><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Dimmer Mode": <modbus:199:holding: 4000><-- 34 (0x22)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:199 is connected
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:199:coil: 7>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:199:coil: 8>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:199:discrete: 0>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:199:discrete: 1>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:199:discrete: 2>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:199:discrete: 3>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:199:holding: 2007>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:199:holding: 2008>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:199:holding: 2009>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:199:holding: 2010>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:199:input: 32>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:199:input: 33>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:199:input: 34>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:199:input: 35>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:199: reboot>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 209]
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "disable legacy input mode control": <modbus:209:holding: 5>>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [modbus] Failed to write 1 registers starting from <holding: 5>: Serial protocol error>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:209:holding: 110><-- 1152 (0x480)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Use outputs 1 and 2 for curtain 1 control": <modbus:209:hol>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Use outputs 3 and 4 for curtain 2 control": <modbus:209:hol>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Use outputs 5 and 6 for curtain 3 control": <modbus:209:hol>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:209 is connected
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:209:coil: 0>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:209:coil: 1>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:209:coil: 2>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:209:coil: 3>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:209:coil: 4>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:209:coil: 5>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:209: reboot>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 214]
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Relays State After Power On": <modbus:214:holding: 6><-- 1 >
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud Rate": <modbus:214:holding: 110><-- 1152 (0x480)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Short Press": <modbus:214:holding: 584><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Short Press": <modbus:214:holding: 585><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Short Press": <modbus:214:holding: 588><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Long Press": <modbus:214:holding: 648><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Long Press": <modbus:214:holding: 649><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Long Press": <modbus:214:holding: 652><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Output K1": <modbus:214:holding: 930><-- 1 (0x1)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Output K2": <modbus:214:holding: 931><-- 1 (0x1)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer Behaviour": <modbus:214:holding: 952><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Restore Outputs State After Leakage Fix": <modbus:214:holdi>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer": <modbus:214:holding: 8264><-- 2 (0x2)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer": <modbus:214:holding: 8272><-- 2 (0x2)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Output K1": <modbus:214:holding: 8276><-- 1 (0x1)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Output K2": <modbus:214:holding: 8277><-- 1 (0x1)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Leakage Mode": <modbus:214:holding: 8278><-- 2 (0x2)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer": <modbus:214:holding: 8280><-- 2 (0x2)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer": <modbus:214:holding: 8288><-- 2 (0x2)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer": <modbus:214:holding: 8296><-- 2 (0x2)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:214 is connected
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:214:coil: 0>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:214:coil: 1>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:214:coil: 2>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:214:coil: 3>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:214:discrete: 0>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:214:discrete: 1>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:214:discrete: 2>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:214:discrete: 3>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:214:discrete: 4>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:214:input: 32>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:214:input: 33>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:214:input: 34>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:214:input: 35>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:214:input: 36>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:214: reboot>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 219]
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Relays State After Power On": <modbus:219:holding: 6><-- 1 >
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud Rate": <modbus:219:holding: 110><-- 1152 (0x480)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Short Press": <modbus:219:holding: 584><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Short Press": <modbus:219:holding: 585><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Short Press": <modbus:219:holding: 588><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Long Press": <modbus:219:holding: 648><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Long Press": <modbus:219:holding: 649><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Long Press": <modbus:219:holding: 652><-- 0 (0x0)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Output K1": <modbus:219:holding: 930><-- 1 (0x1)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Output K2": <modbus:219:holding: 931><-- 1 (0x1)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer Behaviour": <modbus:219:holding: 952><-- 1 (0x1)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer": <modbus:219:holding: 8264><-- 2 (0x2)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer": <modbus:219:holding: 8272><-- 2 (0x2)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer": <modbus:219:holding: 8280><-- 2 (0x2)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer": <modbus:219:holding: 8288><-- 2 (0x2)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Buzzer": <modbus:219:holding: 8296><-- 2 (0x2)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:219 is connected
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:219:coil: 0>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:219:coil: 1>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:219:coil: 2>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:219:coil: 3>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:219:discrete: 0>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:219:discrete: 1>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:219:discrete: 2>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:219:discrete: 3>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:219:discrete: 4>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:219:input: 32>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:219:input: 33>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:219:input: 34>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:219:input: 35>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:219:input: 36>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:219: reboot>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 220]
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "disable legacy input mode control": <modbus:220:holding: 5>>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Outputs State After Power On": <modbus:220:holding: 6><-- 1>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [modbus] Failed to write 2 registers starting from <holding: 5>: Serial protocol error>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:220:holding: 110><-- 1152 (0x480)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Use outputs 1 and 2 for curtain 1 control": <modbus:220:hol>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Use outputs 3 and 4 for curtain 2 control": <modbus:220:hol>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Use outputs 5 and 6 for curtain 3 control": <modbus:220:hol>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:220 is connected
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:220:coil: 0>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:220:coil: 1>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:220:coil: 2>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:220:coil: 3>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:220:coil: 4>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:220:coil: 5>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:220: reboot>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 233]
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "disable legacy input mode control": <modbus:233:holding: 5>>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: WARNING: [modbus] Failed to write 1 registers starting from <holding: 5>: Serial protocol error>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud rate": <modbus:233:holding: 110><-- 1152 (0x480)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Use outputs 1 and 2 for curtain 1 control": <modbus:233:hol>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Use outputs 3 and 4 for curtain 2 control": <modbus:233:hol>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Use outputs 5 and 6 for curtain 3 control": <modbus:233:hol>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:233 is connected
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:233:coil: 0>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:233:coil: 1>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:233:coil: 2>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:233:coil: 3>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:233:coil: 4>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:233:coil: 5>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:233: reboot>
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 91]
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud Rate": <modbus:91:holding: 110><-- 1152 (0x480)
Mar 28 16:25:28 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:91 is connected
Mar 28 16:25:29 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:91:input: 0>
Mar 28 16:25:29 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:91:input: 1>
Mar 28 16:25:29 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:91: reboot>
Mar 28 16:25:29 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Continuous read enabled [slave_id is 93]
Mar 28 16:25:29 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [modbus] Init setup register "Baud Rate": <modbus:93:holding: 110><-- 1152 (0x480)
Mar 28 16:25:29 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial device] device modbus:93 is connected
Mar 28 16:25:29 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:29] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
Mar 28 16:25:29 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:93:input: 0>
Mar 28 16:25:29 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are enabled for <modbus:93:input: 1>
Mar 28 16:25:29 wirenboard-AL2VKR5E wb-mqtt-serial[4105909]: INFO: [serial client] Events are disabled for <modbus:93: reboot>
Mar 28 16:25:49 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:49] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
Mar 28 16:25:50 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:50] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
Mar 28 16:25:50 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:50] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
Mar 28 16:25:51 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:51] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
Mar 28 16:25:53 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:53] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
Mar 28 16:25:53 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:53] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
Mar 28 16:25:56 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:56] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
Mar 28 16:25:56 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:56] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
Mar 28 16:25:57 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:57] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
Mar 28 16:25:57 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:57] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
Mar 28 16:25:58 wirenboard-AL2VKR5E zigbee2mqtt[1690577]: [2026-03-28 16:25:58] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/ChaildsRoomWrlsSwit>
lines 28688-28730/28730 (END)


systemctl restart zigbee2mqtt.service