reboot [ OK ] Stopped target Bluetooth. [ OK ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Stopped target Host and Network Name Lookups. Stopping Bluetooth service... Stopping Session c1 of user root. Stopping User Manager for UID 0... [ OK ] Stopped target Graphical Interface. Stopping watchdog daemon... [ OK ] Stopped Daily Cleanup of Temporary Directories. [ OK ] Stopped Bluetooth service. [ OK ] Stopped Serial Getty on ttymxc0. [ OK ] Stopped User Manager for UID 0. [ OK ] Stopped Session c1 of user root. [ OK ] Stopped watchdog daemon. [ OK ] Stopped target Multi-User System. Stopping Avahi mDNS/DNS-SD Stack... Stopping LSB: : Wiren Board MQTT KNX bridge... Stopping OpenBSD Secure Shell server... Stopping LSB: Configuration Editor Backend... Stopping LSB: MQTT Driver for GPIO-controlled switches... Stopping LSB: Advanced IEEE 802.11 management daemon... Stopping LSB: MQTT Rule Engine for Wiren Board... Stopping LSB: Firmware update monitor... Stopping MQTT Driver for ADC... Stopping Wiren Board MQTT to Modbus TCP gateway... [ 217.124612] RTL871X: ap recv deauth reason code(3) sta:d0:c6:37:f8:01:79 Stopping LSB: Starts klogd... Stopping D-Bus System Message Bus... Stopping Regular background program processing daemon... Stopping LSB: : Wiren Board database logger... Stopping LSB: Brings up/down network automatically... Stopping LSB: board-specific initscript... Stopping A high performance web server and a reverse proxy server... Stopping dnsmasq - A lightweight DHCP and caching DNS server... [ OK ] Stopped Compensation of systime in … device-tree (with opposite sign). Stopping Cgroup management daemon... Stopping LSB: MQTT driver for WB HomA for RFM69 ISM radio... Stopping LSB: Kernel 1-wire MQTT driver for WB-HomA... [ OK ] Removed slice User Slice of root. Stopping Login Service... [ OK ] Stopped target Login Prompts. Stopping Getty on tty1... [ OK ] Removed slice system-serial\x2dgetty.slice. [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped Cgroup management daemon. [ OK ] Stopped Login Service. [ OK ] Stopped Avahi mDNS/DNS-SD Stack. [ OK ] Stopped Regular background program processing daemon. [ OK ] Stopped Getty on tty1. [ OK ] Stopped OpenBSD Secure Shell server. [ OK ] Stopped MQTT Driver for ADC. [ 218.055108] RTL871X: ap recv deauth reason code(3) sta:d0:c6:37:f8:01:79 [ OK ] Stopped A high performance web server and a reverse proxy server. [ OK ] Stopped Wiren Board MQTT to Modbus TCP gateway. [ 218.767119] RTL871X: ap recv deauth reason code(3) sta:d0:c6:37:f8:01:79 [ OK ] Stopped dnsmasq - A lightweight DHCP and caching DNS server. [ 218.915236] RTL871X: ap recv deauth reason code(3) sta:80:c5:f2:2b:10:87 [ 218.940241] RTL871X: ap recv deauth reason code(3) sta:80:c5:f2:2b:10:87 [ OK ] Removed slice system-getty.slice. Stopping Permit User Sessions... [ OK ] Stopped LSB: Advanced IEEE 802.11 management daemon. [ OK ] Stopped LSB: : Wiren Board MQTT KNX bridge. [ OK ] Stopped LSB: Configuration Editor Backend. [ OK ] Stopped LSB: Brings up/down network automatically. [ OK ] Stopped LSB: MQTT Rule Engine for Wiren Board. [ 219.574900] RTL871X: sta recv deauth reason code(3) sta:7c:25:da:1f:5b:36, ignore = 0 [ 219.592147] RTL871X: sta recv deauth reason code(3) sta:7c:25:da:1f:5b:36, ignore = 0 [ 219.622544] RTL871X: sta recv deauth reason code(3) sta:7c:25:da:1f:5b:36, ignore = 0 [ 219.644983] RTL871X: sta recv deauth reason code(3) sta:7c:25:da:1f:5b:36, ignore = 0 [ 219.688787] RTL871X: sta recv deauth reason code(3) sta:7c:25:da:1f:5b:36, ignore = 0 [ OK ] Stopped LSB: Kernel 1-wire MQTT driver for WB-HomA. [ 219.734935] RTL871X: sta recv deauth reason code(3) sta:7c:25:da:1f:5b:36, ignore = 0 [ OK ] Stopped LSB: Firmware update monitor. [ OK ] Stopped Permit User Sessions. [ OK ] Stopped LSB: : Wiren Board database logger. [ OK ] Stopped LSB: MQTT Driver for GPIO-controlled switches. [ OK ] Stopped LSB: Starts klogd. Stopping LSB: Starts syslogd... [ OK ] Stopped LSB: MQTT driver for WB HomA for RFM69 ISM radio. Stopping Mosquitto MQTT v3.1/v3.1.1 Broker... [ OK ] Stopped Mosquitto MQTT v3.1/v3.1.1 Broker. [ OK ] Stopped LSB: board-specific initscript. Stopping LSB: Start NTP daemon... [ OK ] Stopped LSB: Starts syslogd. [ OK ] Stopped LSB: Start NTP daemon. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Network is Online. Stopping KNX Daemon... [ OK ] Stopped KNX Daemon. [ OK ] Stopped target Network. Stopping ifup for wlan0... Stopping Raise network interfaces... [ 221.128233] RTL871X: nolinked power save enter [ 222.235177] RTL871X: RTW_ADAPTIVITY_EN_[ 222.238876] AUTO, chplan:0x20, Regulation:3,3 [ 222.243275] RTL871X: RTW_ADAPTIVITY_MODE_[ 222.247210] NORMAL [ 222.884115] RTL871X: nolinked power save leave [ OK ] Stopped ifup for wlan0. [ OK ] Stopped Raise network interfaces. Stopping LSB: initscript to use GSM modem integrated RTC... [ OK ] Stopped LSB: initscript to use GSM modem integrated RTC. Stopping LSB: Hardware configuration with Device Tree overlays... Stopping LSB: prepare partitions & rootfs... [ OK ] Stopped LSB: Hardware configuration with Device Tree overlays. Stopping watch config files... [ OK ] Stopped watch config files. [ OK ] Stopped LSB: prepare partitions & rootfs. [ OK ] Stopped target Basic System. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Paths. [ OK ] Stopped target Sockets. [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Closed KNX Daemon (socket). [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Stopped target System Initialization. [ OK ] Stopped target Encrypted Volumes. [ OK ] Stopped Forward Password Requests to Wall Directory Watch. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. Stopping Update UTMP about System Boot/Shutdown... [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Load Kernel Modules. [ OK ] Stopped target Swap. Deactivating swap /dev/disk/by-path/platform-2194000.usdhc-part5... Stopping Load/Save Random Seed... [ OK ] Deactivated swap /dev/disk/by-uuid/…8c985-00cb-47de-b213-569b077821db. [ OK ] Deactivated swap /dev/disk/by-path/platform-2194000.usdhc-part5. [ OK ] Deactivated swap /dev/disk/by-partuuid/3fbc1f54-05. [ OK ] Deactivated swap /dev/disk/by-id/mmc-Q2J55L_0x105f23af-part5. [ OK ] Deactivated swap /dev/mmcblk0p5. [ OK ] Stopped Load/Save Random Seed. [ OK ] Stopped Update UTMP about System Boot/Shutdown. [ OK ] Stopped Create Volatile Files and Directories. Stopping prepare mounts and symlinks to config files... [ OK ] Stopped prepare mounts and symlinks to config files. [ OK ] Stopped target Local File Systems. Unmounting /var/log... Unmounting /run/user/0... Unmounting /mnt/data... [ OK ] Unmounted /var/log. [ OK ] Unmounted /run/user/0. [ OK ] Unmounted /mnt/data. [ OK ] Stopped File System Check on /dev/mmcblk0p6. [ OK ] Removed slice system-systemd\x2dfsck.slice. [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped target Local File Systems (Pre). [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Reached target Shutdown. [ 226.452606] watchdog: watchdog0: watchdog did not stop! [ 226.469409] systemd-shutdow: 24 output lines suppressed due to ratelimiting [ 226.522898] systemd-shutdown[1]: Sending SIGTERM to remaining processes... [ 226.549066] systemd-journald[151]: Received SIGTERM from PID 1 (systemd-shutdow). [ 226.566010] systemd-shutdown[1]: Sending SIGKILL to remaining processes... [ 226.590040] systemd-shutdown[1]: Hardware watchdog 'imx2+ watchdog', version 0 [ 226.599463] systemd-shutdown[1]: Unmounting file systems. [ 226.606397] systemd-shutdown[1]: Remounting '/' read-only with options 'errors=remount-ro,data=ordered'. [ 226.638665] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro,data=ordered [ 226.655926] systemd-shutdown[1]: Remounting '/' read-only with options 'errors=remount-ro,data=ordered'. [ 226.665960] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro,data=ordered [ 226.673515] systemd-shutdown[1]: All filesystems unmounted. [ 226.679362] systemd-shutdown[1]: Deactivating swaps. [ 226.684618] systemd-shutdown[1]: All swaps deactivated. [ 226.690106] systemd-shutdown[1]: Detaching loop devices. [ 226.716528] ci_hdrc ci_hdrc.1: remove, state 1 [ 226.721023] usb usb2: USB disconnect, device number 1 [ 226.726373] usb 2-1: USB disconnect, device number 2 [ 226.731354] usb 2-1.1: USB disconnect, device number 3 [ 226.742558] RTL871X: rtw_ndev_uninit(wlan0) [ 226.775408] RTL871X: rtw_ndev_uninit(wlan1) [ 226.805333] RTL871X: rtw_cmd_thread: DriverStopped(1) SurpriseRemoved(1) break at line 452 [ 226.813651] RTL871X: rtw_dev_unload: driver not in IPS [ 226.825181] ci_hdrc ci_hdrc.1: USB bus 2 deregistered [ 226.830584] ci_hdrc ci_hdrc.0: remove, state 1 [ 226.835588] usb usb1: USB disconnect, device number 1 [ 226.840678] usb 1-1: USB disconnect, device number 2 [ 226.879065] ci_hdrc ci_hdrc.0: USB bus 1 deregistered [ 226.905972] imx2-wdt 20bc000.wdog: Device shutdown: Expect reboot! [ 226.913042] reboot: Restarting system U-Boot 2017.03-1.1.0-gaa233c0fa3 (Jun 09 2020 - 19:28:23 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 61C Reset cause: WDOG Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 3  2  1  0 Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Device 0: Vendor: Kingston Rev: 1.13 Prod: DataTraveler II+ Type: Removable Hard Disk Capacity: 983.5 MB = 0.9 GB (2014208 x 512) reading wb6_update.fit ** Unable to read file wb6_update.fit ** reading wb6_update_FACTORYRESET.fit 1 bytes read in 19 ms (0 Bytes/s) ############################## # Detected USB flash drive with update file # Filename: wb6_update_FACTORYRESET.fit # Press a FW key if you want to update firmware from this file # or wait 3 seconds to boot normally. ############################## No USB update detected, continuing boot switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 324 bytes read in 60 ms (4.9 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 5127576 bytes read in 344 ms (14.2 MiB/s) MMC read: dev # 0, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt imx6ul-wirenboard670 46090 bytes read in 405 ms (110.4 KiB/s) 485 bytes read in 144 ms (2.9 KiB/s) Applying DT overlay wb6-nogsm 597 bytes read in 138 ms (3.9 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu 509 bytes read in 166 ms (2.9 KiB/s) Applying DT overlay wb6-noradio 334 bytes read in 104 ms (2.9 KiB/s) Applying DT overlay wb6-eth1 254 bytes read in 117 ms (2 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x82000000 [ 0x000000 - 0x4e3d98 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 9ef32000, end 9ef54fff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.22-wb6 (root@wbdevenv) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #2 SMP Wed Dec 9 16:55:10 UTC 2020 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Wiren Board rev. 6.7.0 (i.MX6UL/ULL) [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] percpu: Embedded 14 pages/cpu @defc7000 s25996 r8192 d23156 u57344 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait ro [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 491716K/524288K available (6144K kernel code, 312K rwdata, 2280K rodata, 1024K init, 342K bss, 16188K reserved, 16384K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB) [ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB) [ 0.000000] .data : 0xc0b00000 - 0xc0b4e140 ( 313 kB) [ 0.000000] .bss : 0xc0b50000 - 0xc0ba5aec ( 343 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000055] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002594] Console: colour dummy device 80x30 [ 0.002637] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002672] pid_max: default: 32768 minimum: 301 [ 0.002940] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002964] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.004436] CPU: Testing write buffer coherency: ok [ 0.005009] /cpus/cpu@0 missing clock-frequency property [ 0.005049] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005106] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.007738] Brought up 1 CPUs [ 0.007771] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.007787] CPU: All CPU(s) started in SVC mode. [ 0.009236] devtmpfs: initialized [ 0.036583] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.037353] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.037402] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.038805] pinctrl core: initialized pinctrl subsystem [ 0.041369] NET: Registered protocol family 16 [ 0.043274] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.046092] cpuidle: using governor menu [ 0.081117] No ATAGs? [ 0.081173] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.081197] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.083487] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.129603] mxs-dma 1804000.dma-apbh: initialized [ 0.134438] SCSI subsystem initialized [ 0.135052] usbcore: registered new interface driver usbfs [ 0.135231] usbcore: registered new interface driver hub [ 0.135487] usbcore: registered new device driver usb [ 0.137178] i2c-gpio i2c_rtc: using pins 48 (SDA) and 49 (SCL) [ 0.138100] i2c-gpio i2c_eeprom1: using pins 76 (SDA) and 67 (SCL) [ 0.138970] i2c-gpio i2c_eeprom2: using pins 70 (SDA) and 71 (SCL) [ 0.140497] i2c i2c-1: IMX I2C adapter registered [ 0.140541] i2c i2c-1: can't use DMA, using PIO instead. [ 0.140888] Linux video capture interface: v2.00 [ 0.141044] pps_core: LinuxPPS API ver. 1 registered [ 0.141063] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.141116] PTP clock support registered [ 0.141976] Advanced Linux Sound Architecture Driver Initialized. [ 0.144513] clocksource: Switched to clocksource mxc_timer1 [ 0.170176] NET: Registered protocol family 2 [ 0.171441] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.171565] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.171724] TCP: Hash tables configured (established 4096 bind 4096) [ 0.171838] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.171893] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.172194] NET: Registered protocol family 1 [ 0.173114] RPC: Registered named UNIX socket transport module. [ 0.173146] RPC: Registered udp transport module. [ 0.173164] RPC: Registered tcp transport module. [ 0.173179] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.178147] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.197854] NFS: Registering the id_resolver key type [ 0.197921] Key type id_resolver registered [ 0.197939] Key type id_legacy registered [ 0.208855] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.208890] io scheduler noop registered (default) [ 0.208908] io scheduler deadline registered [ 0.208985] io scheduler cfq registered [ 0.215787] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.215829] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.225347] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 19, base_baud = 5000000) is a IMX [ 0.804211] console [ttymxc0] enabled [ 0.809888] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 56, base_baud = 5000000) is a IMX [ 0.853256] imx_rngc 2284000.rngb: Freescale RNGC registered. [ 0.859390] [drm] Initialized [ 0.899257] brd: module loaded [ 0.919088] loop: module loaded [ 0.927350] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 0.938782] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 0.950422] spi_imx 2010000.ecspi: probed [ 0.956124] libphy: Fixed MDIO Bus: probed [ 0.962700] 20b4000.ethernet supply phy not found, using dummy regulator [ 0.970798] pps pps0: new PPS source ptp0 [ 1.004358] libphy: fec_enet_mii_bus: probed [ 1.010694] fec 20b4000.ethernet eth0: registered PHC device 0 [ 1.134608] 2188000.ethernet supply phy not found, using dummy regulator [ 1.255690] pps pps1: new PPS source ptp1 [ 1.260956] libphy: fec_enet_mii_bus: probed [ 1.269100] fec 2188000.ethernet eth1: registered PHC device 1 [ 1.275646] PPP generic driver version 2.4.2 [ 1.280480] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.287166] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.293030] usbcore: registered new interface driver usb-storage [ 1.299667] usbcore: registered new interface driver usbserial [ 1.305823] usbcore: registered new interface driver usbserial_generic [ 1.312482] usbserial: USB Serial support registered for generic [ 1.319227] mousedev: PS/2 mouse device common for all mice [ 1.383288] rtc-pcf8563 4-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 1.399542] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 [ 1.408651] i2c /dev entries driver [ 1.422179] lm75 4-0048: hwmon0: sensor 'lm75b' [ 1.543247] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.551517] sdhci: Secure Digital Host Controller Interface driver [ 1.557846] sdhci: Copyright(c) Pierre Ossman [ 1.562233] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.634593] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.651457] ledtrig-cpu: registered to indicate activity on CPUs [ 1.678216] usbcore: registered new interface driver usbhid [ 1.685977] usbhid: USB HID core driver [ 1.712075] NET: Registered protocol family 10 [ 1.719374] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.727286] NET: Registered protocol family 17 [ 1.731968] Key type dns_resolver registered [ 1.741345] Registering SWP/SWPB emulation handler [ 1.748333] registered taskstats version 1 [ 1.769694] random: fast init done [ 1.778995] mmc0: new DDR MMC card at address 0001 [ 1.786111] imx_thermal 2000000.aips-bus:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 1.797107] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 1.802103] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 1.821020] rtc-pcf8563 4-0051: setting system clock to 2020-12-23 16:54:48 UTC (1608742488) [ 1.829519] of_cfs_init [ 1.832353] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 1.838855] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB [ 1.847956] of_cfs_init: OK [ 1.856502] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 1.862097] vdd3p0: disabling [ 1.868168] vref-3v3: disabling [ 1.871343] usb1_vbus: disabling [ 1.874695] ALSA device list: [ 1.877675] No soundcards found. [ 1.882170] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 1.891131] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 1.906851] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 1.915262] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 1.927026] devtmpfs: mounted [ 1.931484] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) [ 2.196045] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.233869] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.253166] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 2.295725] systemd[1]: Set hostname to . [ 2.588412] systemd-sysv-generator[130]: [/etc/init.d/wb-mqtt-knx:6] Could not build name for facility $remote_fs,: Invalid argument [ 2.920213] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 2.955110] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 2.985222] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 3.026199] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 3.085377] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 3.116596] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 3.161510] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... Mounting POSIX Message Queue File System... [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Created slice system-getty.slice. [ OK ] Listening on udev Control Socket. Mounting Debug File System... [ OK ] Reached target Slices. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Reached target Encrypted Volumes. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Listening on Journal Socket. Starting Create list of required st…ce nodes for the current kernel... Starting File System Check on Root Device... Starting Journal Service... Starting Load Kernel Modules... [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on udev Kernel Socket. [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted /sys/kernel/config. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Load Kernel Modules. [ OK ] Started File System Check on Root Device. [ OK ] Started Journal Service. [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... Starting Create Static Device No[ 4.133823] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro des in /dev... [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... Starting udev Coldplug all Devices... Starting Flush Journal to Persistent Storage... Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Load/Save Random Seed. [ 4.646350] systemd-journald[148]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. [ 6.017899] lirc_dev: IR Remote Control driver registered, major 245 [ OK ] Started udev Coldplug all Devices. [ 6.066082] Driver for 1-wire Dallas network protocol. [ 6.086666] lirc_pwm: module is from the staging directory, the quality is unknown, you have been warned. [ 6.175972] imx6ul-pinctrl 20e0000.iomuxc: pin MX6UL_PAD_LCD_DATA08 already requested by 20e0000.iomuxc; cannot claim for lirc-rfm69 [ 6.188062] imx6ul-pinctrl 20e0000.iomuxc: pin-78 (lirc-rfm69) status -22 [ 6.194925] imx6ul-pinctrl 20e0000.iomuxc: could not request pin 78 (MX6UL_PAD_LCD_DATA08) from group rfm69diogrp on device 20e0000.iomuxc [ 6.207484] lirc_pwm lirc-rfm69: Error applying setting, reverse things back [ OK ] Found device /dev/ttymxc0. [ 6.545205] lirc_pwm: probe of lirc-rfm69 failed with error -22 [ 6.586374] fec 20b4000.ethernet rename2: renamed from eth0 [ 6.914322] fec 2188000.ethernet eth0: renamed from eth1 [ 6.965281] fec 20b4000.ethernet eth1: renamed from rename2 [ 6.981692] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 7.029884] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 7.124817] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 7.175090] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.181905] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.189297] usb usb1: Product: EHCI Host Controller [ 7.194190] usb usb1: Manufacturer: Linux 4.9.22-wb6 ehci_hcd [ 7.199987] usb usb1: SerialNumber: ci_hdrc.0 [ 7.485411] hub 1-0:1.0: USB hub found [ 7.543558] hub 1-0:1.0: 1 port detected [ 7.586613] 2184200.usb supply vbus not found, using dummy regulator [ 7.688137] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 7.693095] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 7.808283] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 7.862058] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.869015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.876305] usb usb2: Product: EHCI Host Controller [ 7.881195] usb usb2: Manufacturer: Linux 4.9.22-wb6 ehci_hcd [ 7.886977] usb usb2: SerialNumber: ci_hdrc.1 [ 7.954688] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ OK ] Found device /dev/mmcblk0p5. [ 8.155383] hub 2-0:1.0: USB hub found [ 8.184372] hub 2-0:1.0: 1 port detected [ 8.188470] usb 1-1: New USB device found, idVendor=0951, idProduct=1601 [ 8.195249] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.202422] usb 1-1: Product: DataTraveler II+ [ 8.206922] usb 1-1: Manufacturer: Kingston [ 8.211113] usb 1-1: SerialNumber: 5B5A1C240DBE [ OK ] Found device /dev/mmcblk0p6. [ 8.416481] usb-storage 1-1:1.0: USB Mass Storage device detected [ 8.493844] scsi host0: usb-storage 1-1:1.0 Starting File System Check on /dev/mmcblk0p6... [ 8.664684] usb 2-1: new high-speed USB device number 2 using ci_hdrc Activating swap /dev/mmcblk0p5... [ 8.724092] Adding 262140k swap on /dev/mmcblk0p5. Priority:-1 extents:1 across:262140k SS [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ OK ] Started File System Check on /dev/mmcblk0p6. [ 8.875596] usb 2-1: New USB device found, idVendor=0424, idProduct=2514 [ 8.882352] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Mounting /mnt/data... [ 8.932775] hub 2-1:1.0: USB hub found [ 8.940447] hub 2-1:1.0: 4 ports detected [ 9.030613] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /mnt/data. Starting prepare mounts and symlinks to config files... [ 9.274708] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 9.439317] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720 [ 9.446400] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.453760] usb 2-1.1: Product: 802.11n WLAN Adapter [ 9.458786] usb 2-1.1: Manufacturer: Realtek [ 9.463066] usb 2-1.1: SerialNumber: 00e04c000001 [ 9.611887] scsi 0:0:0:0: Direct-Access Kingston DataTraveler II+ 1.13 PQ: 0 ANSI: 0 CCS [ 9.629674] Bluetooth: Core ver 2.22 [ 9.633367] NET: Registered protocol family 31 [ 9.638045] Bluetooth: HCI device and connection manager initialized [ OK ] Listening on L[ 9.732300] Bluetooth: HCI socket layer initialized oad/Save RF Kill Switch Status /dev/rfkill Watch. [ 9.783980] Bluetooth: L2CAP socket layer initialized [ 9.803513] Bluetooth: SCO socket layer initialized [ 9.848867] sd 0:0:0:0: [sda] 2014208 512-byte logical blocks: (1.03 GB/984 MiB) [ 9.889779] usbcore: registered new interface driver btusb [ 9.899943] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 9.908747] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin [ 9.919184] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 9.928494] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin [ 9.935074] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin [ 9.944937] Bluetooth: hci0: rom_version status=0 version=1 [ 9.950591] Bluetooth: cfg_sz 0, total size 22496 Starting Load/Save RF Kill Switch Status... [ 9.965045] sd 0:0:0:0: [sda] Write Protect is off [ 10.019201] sd 0:0:0:0: [sda] No Caching mode page found [ 10.024715] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 10.108251] sda: sda1 [ 10.132049] sd 0:0:0:0: [sda] Attached SCSI removable disk [ OK ] Started Load/Save RF Kill Switch Status. [ 10.384411] 8723bu: module is from the staging directory, the quality is unknown, you have been warned. [ 10.427661] RTL871X: module init start [ 10.431509] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 [ 10.438622] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ OK ] Started prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ 10.736330] RTL871X: rtw_ndev_init(wlan0) [ 10.769251] RTL871X: rtw_ndev_init(wlan1) [ 10.782020] usbcore: registered new interface driver rtl8723bu [ 10.788046] RTL871X: module init ret=0 [ OK ] Started Create Volatile Files and Directories. [ OK ] Reached target[ 10.867182] usbcore: registered new interface driver rtl8xxxu System Time Synchronized. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Daily apt download activities. [ OK ] Listening on KNX Daemon (socket). [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting LSB: Kernel 1-wire MQTT driver for WB-HomA... [ OK ] Started Cgroup management daemon. Starting Login Service... [ OK ] Started watch config files. [ OK ] Started D-Bus System Message Bus. [ 11.615705] cgroup: new mount options do not match the existing superblock, will be ignored Starting Wiren Board MQTT to Modbus TCP gateway... [ OK ] Started Regular background program processing daemon. Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... Starting LSB: Hardware configuration with Device Tree overlays... Starting LSB: Starts syslogd... Starting Bluetooth service... Starting LSB: prepare partitions & rootfs... Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. Starting Mosquitto MQTT v3.1/v3.1.1 Broker... [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ 12.653971] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.659434] Bluetooth: BNEP filters: protocol multicast [ 12.724834] Bluetooth: BNEP socket layer initialized [ OK ] Started Mosquitto MQTT v3.1/v3.1.1 Broker. [ OK ] Started LSB: Kernel 1-wire MQTT driver for WB-HomA. [ OK ] Started LSB: Starts syslogd. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Bluetooth service. [ OK ] Started Login Service. Starting Hostname Service... [ OK ] Reached target Bluetooth. Starting LSB: Starts klogd... [ OK ] Started ifup for wlan0. Starting LSB: : Wiren Board database logger... Starting LSB: Firmware update monitor... Starting LSB: MQTT driver for WB HomA for RFM69 ISM radio... Starting LSB: Configuration Editor Backend... [ OK ] Started Hostname Service. [ OK ] Started LSB: : Wiren Board database logger. [ OK ] Started LSB: Firmware update monitor. [ OK ] Started LSB: Configuration Editor Backend. [ 17.682181] RTL871X: RTW_ADAPTIVITY_EN_[ 17.686002] AUTO, chplan:0x20, Regulation:3,3 [ 17.690393] RTL871X: RTW_ADAPTIVITY_MODE_[ 17.694231] NORMAL [ OK ] Started LSB: Starts klogd. [ 19.626557] random: crng init done [ 20.155545] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 218, base_baud = 5000000) is a IMX [ 20.591153] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.648278] RTL871X: nolinked power save enter [ OK ] Started Wiren Board MQTT to Modbus TCP gateway. [ OK ] Started LSB: Hardware configuration with Device Tree overlays. Starting LSB: MQTT Driver for GPIO-controlled switches... Starting LSB: MQTT Rule Engine for Wiren Board... [ OK ] Started LSB: MQTT Rule Engine for Wiren Board. Stopping LSB: Configuration Editor Backend... [ OK ] Stopped LSB: Configuration Editor Backend. Starting LSB: Configuration Editor Backend... [ OK ] Started LSB: Configuration Editor Backend. [ OK ] Started LSB: prepare partitions & rootfs. Starting LSB: initscript to use GSM modem integrated RTC... [ OK ] Started LSB: initscript to use GSM modem integrated RTC. Starting Raise network interfaces... [ OK ] Started Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A lightweight DHCP and caching DNS server... Starting KNX Daemon... [ OK ] Started MQTT Driver for serial devices. Starting A high performance web server and a reverse proxy server... Starting MQTT Driver for ADC... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started KNX Daemon. [ OK ] Started Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttymxc0. [ OK ] Reached target Login Prompts. [ OK ] Reached target Network is Online. Starting LSB: Start NTP daemon... Starting LSB: Brings up/down network automatically... Starting LSB: Advanced IEEE 802.11 management daemon... Starting LSB: : Wiren Board MQTT KNX bridge... [ OK ] Started LSB: MQTT driver for WB HomA for RFM69 ISM radio. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started LSB: Start NTP daemon. [ 39.104891] SMSC LAN8710/LAN8720 2188000.ethernet:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1) [ 39.315302] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Debian GNU/Linux 9 wirenboard-A4J3VYPV ttymxc0 wirenboard-A4J3VYPV login: [ 41.525384] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 44.068140] RTL871X: RTW_ADAPTIVITY_EN_[ 44.071863] AUTO, chplan:0x20, Regulation:3,3 [ 44.076333] RTL871X: RTW_ADAPTIVITY_MODE_[ 44.080205] NORMAL [ 47.699284] RTL871X: nolinked power save leave [ 48.135614] Micrel KSZ8081 or KSZ8091 2188000.ethernet:03: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet:03, irq=-1) [ 48.272206] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 48.324704] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 48.759078] RTL871X: assoc success [ 48.762645] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 54.168178] RTL871X: ap recv deauth reason code(3) sta:4a:99:d9:f1:e3:43 [ 55.016830] RTL871X: ap recv deauth reason code(3) sta:d0:ab:d5:c6:6a:51 [ 55.772826] RTL871X: ap recv deauth reason code(3) sta:bc:85:56:10:b8:25 [ 55.824952] RTL871X: ap recv deauth reason code(3) sta:bc:85:56:10:b8:25 [ 55.889212] RTL871X: ap recv deauth reason code(3) sta:bc:85:56:10:b8:25 [ 55.913461] RTL871X: ap recv deauth reason code(3) sta:bc:85:56:10:b8:25 [ 56.543172] RTL871X: ap recv deauth reason code(3) sta:bc:85:56:10:b8:25 [ 56.587286] RTL871X: ap recv deauth reason code(3) sta:bc:85:56:10:b8:25 [ 56.636592] RTL871X: ap recv deauth reason code(3) sta:74:e5:43:5c:ad:64