Connecting to COM port /dev/ttyS3... - Press ESC,S to send file using x/y/zmodem - Press ESC,R to receive file using x/y/zmodem - Press ESC,Q to exit [EC] Pausing for 5 seconds to allow PC to detect USB console - [EC] Wiren Board Embedded Controller [EC] Firmware version: 1.1.1 [EC] Git info: 59e3ebd_HEAD [EC] Power on reason: Power supply on [EC] RTC time: 2020-03-09 19:38:52 [EC] Board temperature: 24.0ￂﾺC [EC] Vin: 0.0V, USB Net: 0.1V, USB Console: 5.0V [EC] Turning on the main CPU; all future debug messages will originate from the. U-Boot SPL 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) DRAM: 2048 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 2 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenvt upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 2 ms (159.2 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6479616 bytes read in 139 ms (44.5 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57693 bytes read in 4 ms (13.8 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-commercial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x62df00 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb155 (root@wbdevenv) (arm-linux-gnueabihf3 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0xbec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 roo [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes,) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, l) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 2043848K/2097152K available (10240K kernel code, 1478K r) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31877 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 ji. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 wi0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, maxs [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s [ 0.000021] Switching to timer-based delay loop, resolution 41ns [ 0.000356] Console: colour dummy device 80x30 [ 0.000428] Calibrating delay loop (skipped), value calculated using timer f) [ 0.000457] pid_max: default: 32768 minimum: 301 [ 0.000691] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, line) [ 0.000719] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes,) [ 0.001886] CPU: Testing write buffer coherency: ok [ 0.002308] /cpus/cpu@0 missing clock-frequency property [ 0.002352] /cpus/cpu@1 missing clock-frequency property [ 0.002393] /cpus/cpu@2 missing clock-frequency property [ 0.002439] /cpus/cpu@3 missing clock-frequency property [ 0.002456] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003517] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.003717] rcu: Hierarchical SRCU implementation. [ 0.004629] smp: Bringing up secondary CPUs ... [ 0.015736] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.026976] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.038104] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.038282] smp: Brought up 1 node, 4 CPUs [ 0.038319] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.038331] CPU: All CPU(s) started in HYP mode. [ 0.038343] CPU: Virtualization extensions available. [ 0.039500] devtmpfs: initialized [ 0.052407] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 [ 0.052705] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms [ 0.052740] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.053704] pinctrl core: initialized pinctrl subsystem [ 0.055246] NET: Registered protocol family 16 [ 0.057827] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.059098] thermal_sys: Registered thermal governor 'step_wise' [ 0.059605] No ATAGs? [ 0.059830] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint. [ 0.059846] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.109678] SCSI subsystem initialized [ 0.109942] usbcore: registered new interface driver usbfs [ 0.110004] usbcore: registered new interface driver hub [ 0.110077] usbcore: registered new device driver usb [ 0.110448] mc: Linux media interface: v0.10 [ 0.110510] videodev: Linux video capture interface: v2.00 [ 0.110585] pps_core: LinuxPPS API ver. 1 registered [ 0.110600] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom> [ 0.110628] PTP clock support registered [ 0.110921] Advanced Linux Sound Architecture Driver Initialized. [ 0.112070] clocksource: Switched to clocksource arch_sys_counter [ 0.750795] NET: Registered protocol family 2 [ 0.751728] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144) [ 0.751786] TCP established hash table entries: 8192 (order: 3, 32768 bytes,) [ 0.751867] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.751990] TCP: Hash tables configured (established 8192 bind 8192) [ 0.752220] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.752297] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.752558] NET: Registered protocol family 1 [ 0.753309] RPC: Registered named UNIX socket transport module. [ 0.753334] RPC: Registered udp transport module. [ 0.753346] RPC: Registered tcp transport module. [ 0.753358] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.754987] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 countee [ 0.756583] Initialise system trusted keyrings [ 0.756851] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 0.765499] NFS: Registering the id_resolver key type [ 0.765560] Key type id_resolver registered [ 0.765574] Key type id_legacy registered [ 0.862674] Key type asymmetric registered [ 0.862701] Asymmetric key parser 'x509' registered [ 0.862851] bounce: pool size: 64 pages [ 0.862924] Block layer SCSI generic (bsg) driver version 0.4 loaded (major ) [ 0.862941] io scheduler mq-deadline registered [ 0.862955] io scheduler kyber registered [ 0.864128] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.887855] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.901927] brd: module loaded [ 0.912763] loop: module loaded [ 0.918457] libphy: Fixed MDIO Bus: probed [ 0.919621] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulr [ 0.920250] libphy: sun4i_mii_bus: probed [ 0.922571] CAN device driver interface [ 0.924683] PPP generic driver version 2.4.2 [ 0.924943] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.924961] ehci-platform: EHCI generic platform driver [ 0.925980] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.926016] ohci-platform: OHCI generic platform driver [ 0.927097] usbcore: registered new interface driver usb-storage [ 0.927213] usbcore: registered new interface driver usbserial_generic [ 0.927253] usbserial: USB Serial support registered for generic [ 0.929268] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 0.929290] sun6i-rtc 1c20400.rtc: RTC enabled [ 0.929667] i2c /dev entries driver [ 0.936078] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, no) [ 0.939132] ledtrig-cpu: registered to indicate activity on CPUs [ 0.939783] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) fr) [ 0.940118] sun8i-ce 1c15000.crypto: will run requests pump with realtime pry [ 0.940791] sun8i-ce 1c15000.crypto: will run requests pump with realtime pry [ 0.940999] sun8i-ce 1c15000.crypto: will run requests pump with realtime pry [ 0.941191] sun8i-ce 1c15000.crypto: will run requests pump with realtime pry [ 0.941352] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 0.941558] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 0.941757] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 0.941937] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 0.942294] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 0.944113] usbcore: registered new interface driver usbhid [ 0.944132] usbhid: USB HID core driver [ 0.949946] Initializing XFRM netlink socket [ 0.950629] NET: Registered protocol family 10 [ 0.951735] Segment Routing with IPv6 [ 0.951863] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.952689] NET: Registered protocol family 17 [ 0.952722] can: controller area network core [ 0.952825] NET: Registered protocol family 29 [ 0.952840] can: raw protocol [ 0.952854] can: broadcast manager protocol [ 0.952874] can: netlink gateway - max_hops=1 [ 0.953335] Key type dns_resolver registered [ 0.953426] Registering SWP/SWPB emulation handler [ 0.953544] registered taskstats version 1 [ 0.953604] Loading compiled-in X.509 certificates [ 0.973707] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.978156] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.978955] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dur [ 0.982884] printk: console [ttyS0] disabled [ 0.983035] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1i [ 1.920472] printk: console [ttyS0] enabled [ 1.925708] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 1.932545] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 1.939158] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -7 [ 1.946497] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) l [ 1.957200] dw-apb-uart 1c28800.serial: Error applying setting, reverse think [ 1.967114] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulr [ 1.975225] libphy: sun4i_mii_bus: probed [ 1.980141] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 1.986991] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 1.993625] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) sta7 [ 2.003107] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.009905] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.016550] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status7 [ 2.024074] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) fl [ 2.034605] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse thik [ 2.043056] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.049846] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.056310] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -7 [ 2.063634] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) frol [ 2.073988] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse thk [ 2.088479] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.104707] vcc-3v3: supplied by regulator-dummy [ 2.110263] vdd-cpu: supplied by regulator-dummy [ 2.115807] vdd-sys: supplied by regulator-dummy [ 2.121279] dcdc4: supplied by regulator-dummy [ 2.126735] vcc-dram: supplied by regulator-dummy [ 2.131591] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.138610] vcc-gmac-phy: supplied by vcc-3v3 [ 2.144081] dc5ldo: supplied by vcc-dram [ 2.148588] tv: Bringing 700000uV into 3300000-3300000uV [ 2.154579] tv: supplied by regulator-dummy [ 2.159371] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.165708] aldo2: supplied by regulator-dummy [ 2.171504] avcc-pll: supplied by regulator-dummy [ 2.177198] eldo1: supplied by regulator-dummy [ 2.182570] eldo2: supplied by regulator-dummy [ 2.187647] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.194527] vcc-pe: supplied by regulator-dummy [ 2.199646] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.206676] vcc-sd-alt: supplied by regulator-dummy [ 2.212478] dldo2: supplied by regulator-dummy [ 2.217869] dldo3: supplied by regulator-dummy [ 2.223273] dldo4: supplied by regulator-dummy [ 2.228204] rtc_ldo: supplied by regulator-dummy [ 2.233781] ldo_io0: supplied by regulator-dummy [ 2.239261] ldo_io1: supplied by regulator-dummy [ 2.244699] axp20x-adc axp22x-adc: DMA mask not set [ 2.250015] random: fast init done [ 2.254698] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mast [ 2.264735] axp20x-i2c 0-0034: AXP20X driver loaded [ 2.299593] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 2.307373] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 1i [ 2.317901] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulr [ 2.321556] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, e [ 2.325881] libphy: sun4i_mii_bus: probed [ 2.420828] mmc0: new DDR MMC card at address 0001 [ 2.426553] mmcblk0: mmc0:0001 MMC64G 58.2 GiB [ 2.431479] mmcblk0boot0: mmc0:0001 MMC64G partition 1 4.00 MiB [ 2.437885] mmcblk0boot1: mmc0:0001 MMC64G partition 2 4.00 MiB [ 2.444155] mmcblk0rpmb: mmc0:0001 MMC64G partition 3 4.00 MiB, chardev (246) [ 2.454943] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.475783] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:88 [ 2.484977] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 2.491336] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 2.497692] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 2.503823] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supportd [ 2.511047] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supportd [ 2.518294] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 2.523281] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 2.530066] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 2.535737] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 2.542075] libphy: stmmac: probed [ 2.804485] ehci-platform 1c14000.usb: EHCI Host Controller [ 2.810097] ehci-platform 1c14000.usb: new USB bus registered, assigned bus 1 [ 2.818346] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 2.852074] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 2.859172] hub 1-0:1.0: USB hub found [ 2.863032] hub 1-0:1.0: 1 port detected [ 2.868194] ehci-platform 1c19000.usb: EHCI Host Controller [ 2.873824] ehci-platform 1c19000.usb: new USB bus registered, assigned bus 2 [ 2.881813] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 2.912074] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 2.919056] hub 2-0:1.0: USB hub found [ 2.922886] hub 2-0:1.0: 1 port detected [ 2.927973] ehci-platform 1c1c000.usb: EHCI Host Controller [ 2.933590] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus 3 [ 2.941578] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 2.972447] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 2.979433] hub 3-0:1.0: USB hub found [ 2.983263] hub 3-0:1.0: 1 port detected [ 3.082168] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.088801] ohci-platform 1c14400.usb: new USB bus registered, assigned bus 4 [ 3.096794] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 3.176947] hub 4-0:1.0: USB hub found [ 3.180751] hub 4-0:1.0: 1 port detected [ 3.185889] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 3.192546] ohci-platform 1c19400.usb: new USB bus registered, assigned bus 5 [ 3.200461] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 3.276974] hub 5-0:1.0: USB hub found [ 3.280781] hub 5-0:1.0: 1 port detected [ 3.285901] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 3.292573] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus 6 [ 3.300384] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 3.307648] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 3.386942] hub 6-0:1.0: USB hub found [ 3.390749] hub 6-0:1.0: 1 port detected [ 3.403760] of_cfs_init [ 3.406332] of_cfs_init: OK [ 3.409838] ALSA device list: [ 3.412865] No soundcards found. [ 3.425553] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB,e [ 3.447028] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. ) [ 3.455300] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.465478] devtmpfs: mounted [ 3.473350] Freeing unused kernel memory: 1024K [ 3.512522] Run /sbin/init as init process [ 3.712102] systemd[1]: System time before build time, advancing clock. [ 3.770623] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PA) [ 3.794878] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 3.833425] systemd[1]: Set hostname to . [ 4.568312] systemd[1]: Queued start job for default target Graphical Interf. [ 4.578086] random: systemd: uninitialized urandom read (16 bytes read) [ 4.588866] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.622353] random: systemd: uninitialized urandom read (16 bytes read) [ 4.630861] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 4.672312] random: systemd: uninitialized urandom read (16 bytes read) [ 4.681055] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.724134] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 4.763848] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.802746] systemd[1]: Started Dispatch Password Requests to Console Direct. [ OK ] Started Dispatch Password ￢ﾀﾦts to Console Directory Watch. [ 4.842591] systemd[1]: Started Forward Password Requests to Wall Directory . [ OK ] Started Forward Password R￢ﾀﾦuests to Wall Directory Watch. [ 4.882638] systemd[1]: Condition check resulted in Arbitrary Executable Fil. [ 4.894694] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 4.932799] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 4.972274] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.003383] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.042789] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 5.093381] systemd[1]: Condition check resulted in Journal Audit Socket bei. [ 5.102681] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.143210] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.179818] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.213013] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.253159] systemd[1]: Condition check resulted in Huge Pages File System b. [ 5.267291] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.308182] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 5.348327] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 5.389031] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 5.430443] systemd[1]: Starting Create list of static device nodes for the . Starting Create list of st￢ﾀﾦodes for the current kernel... [ 5.479318] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 5.519192] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 5.543399] fuse: init (API version 7.32) [ 5.554808] systemd[1]: Condition check resulted in Set Up Additional Binary. [ 5.570627] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 5.624184] systemd[1]: Starting Journal Service... Starting Journal Service... [ 5.641461] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 5.656305] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 5.679291] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 5.687283] systemd[1]: Mounted . stem. [ OK ] Mounted /sys/kernel/config. [ 5.698347] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System 5.709595] systemd[1]: Mounted Kern. m. [ OK ] Mounted Kernel Trace File System. [ 5.774902] systemd[1]: Finished Create list of static device nodes for the . [ OK ] Finished Create list of st￢ﾀﾦ nodes for the current kernel. [ 5.825236] systemd[1]: modprobe@drm.service: Succeeded. [ 5.832938] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 5.874144] systemd[1]: modprobe@fuse.service: Succeeded. [ 5.881264] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 5.923718] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ OK ] Mounted FUSE Control File System. [ 6.186258] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Manage￢ﾀﾦfor Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 7.114440] Driver for 1-wire Dallas network protocol. [ 7.393537] usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, usr [ 7.505537] wbec spi0.0: WBEC device added [ 7.636908] cfg80211: Loading compiled-in X.509 certificates for regulatory e [ 7.641600] Bluetooth: Core ver 2.22 [ 7.648483] NET: Registered protocol family 31 [ 7.653109] Bluetooth: HCI device and connection manager initialized [ 7.659511] Bluetooth: HCI socket layer initialized [ 7.664531] Bluetooth: L2CAP socket layer initialized [ 7.669672] Bluetooth: SCO socket layer initialized [ 7.708652] usbcore: registered new interface driver btusb [ 7.726861] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.733108] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=3 [ 7.740864] cfg80211: loaded regulatory.db is malformed or signature is missd [ 7.743124] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 7.756608] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin [ 7.798154] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin [ 7.819317] Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507 [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/ttyS0. [ 8.013216] RTW: rtl8733bu v5.13.0.1-112-g10248f4f3.20230626_COEX20230616-33e [ 8.020482] RTW: rtl8733bu BT-Coex version = COEX20230616-330e [ OK ] Found device /dev/mmcblk0p6. [ 8.035301] RTW: [HALMAC]135 [ 8.035301] HALMAC_MAJOR_VER = 1 [ 8.035301] HALMAC_PROTOTYPE_VER = 6 [ 8.035301] HALMAC_MINOR_VER = 6 [ 8.035301] HALMAC_PATCH_VER = 39 [ 8.235131] Bluetooth: hci0: RTL: fw version 0xd9b80b4f Activating swap /dev/mmcblk0p5... [ 8.333001] RTW: hal_com_config_channel_plan chplan:0x7F Starting File System Check on /dev/mmcblk0p6... [ 8.429846] wbec-power wbec-power.8.auto: DMA mask not set [ 8.433087] wbec-pwrkey wbec-pwrkey.7.auto: DMA mask not set [ 8.441481] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_mast0 [ 8.444401] wbec-rtc wbec-rtc.6.auto: DMA mask not set [ 8.457501] wbec-adc wbec-adc.3.auto: DMA mask not set [ 8.463440] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 acc [ 8.465537] wbec-watchdog wbec-watchdog.5.auto: DMA mask not set [ 8.466842] iio-rescale vin-volt: using raw+scale source channel [ 8.467787] iio-rescale v33-volt: using raw+scale source channel [ 8.468652] iio-rescale v50-volt: using raw+scale source channel [ 8.469554] iio-rescale vbus-debug-volt: using raw+scale source channel [ 8.472348] iio-rescale vbus-network-volt: using raw+scale source channel [ OK ] Listening on Load/Save RF ￢ﾀﾦitch S[ 8.473165] iio-rescale a1-voltl tatus /dev/rfkill Watch.[ 8.477059] iio-rescale a2-volt: using raw+scale soul [ 8.497674] wbec-gpio wbec-gpio.4.auto: DMA mask not set [ 8.505307] iio-rescale a3-volt: using raw+scale source channel [ 8.557643] wbec-rtc wbec-rtc.6.auto: registered as rtc0 [ 8.558837] iio-rescale a4-volt: using raw+scale source channel [ 8.579434] wbec-rtc wbec-rtc.6.auto: setting system clock to 2020-03-09T19:) [ 8.703547] RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:33:8b:bd [ OK ] Activated swap /dev/mmcblk0p5.[ 8.711698] RTW: rtw_ndev_init(wlan1)d [ 8.724094] usbcore: registered new interface driver rtl8733bu [ OK ] Finished File System Check on /dev/mmcblk0p6. [ OK ] Reached target Swap. [ OK ] Reached target Hardware activated USB gadget. Mounting /mnt/data... Starting Load/Save RF Kill Switch Status... [ 9.022391] input input0: power key press detected [ 9.027271] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. d [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... Starting prepare mounts and symlinks to config[ 9.284251] systemd-j. files... [ 9.492186] random: crng init done [ 9.495641] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. [ 10.238086] w1_master_driver w1_bus_master2: w1_search: max_slave_count 64 r. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Monitor directorie￢ﾀﾦ templates for wb-mqtt-serial. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli￢ﾀﾦata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Paths. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli￢ﾀﾦt4 Metadata Check Snapshots... Starting Authorization Manager... [ 11.171569] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.177073] Bluetooth: BNEP filters: protocol multicast [ 11.182436] Bluetooth: BNEP socket layer initialized Starting User Login Management... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... [ OK ] Started Generates wb-mqtt-￢ﾀﾦ UI schema for wb-mqtt-confed. Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ OK ] Finished Remove Stale Onli￢ﾀﾦext4 Metadata Check Snapshots. [ OK ] Started Authorization Manager. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Bluetooth service. [ OK ] Started User Login Management. [ OK ] Started WPA supplicant. [ OK ] Removed slice system-modprobe.slice. [ OK ] Stopped target Timers. [ OK ] Stopped Daily apt upgrade and clean activities. [ OK ] Stopped Daily apt download activities. [ OK ] Stopped Periodic ext4 Onli￢ﾀﾦata Check for All Filesystems. [ OK ] Stopped Discard unused blocks once a week. [ OK ] Stopped Daily rotation of log files. [ OK ] Stopped Daily Cleanup of Temporary Directories. [ OK ] Stopped target Hardware activated USB gadget. Stopping Bluetooth service... Stopping Load/Save Random Seed... Stopping Load/Save RF Kill Switch Status... Stopping Avahi mDNS/DNS-SD Stack... Stopping Regular background program processing daemon... [ OK ] Removed slice system-getty.slice. Stopping Authorization Manager... [ OK ] Removed slice system-serial\x2dgetty.slice. Stopping User Login Management... Stopping Generates wb-mqtt￢ﾀﾦI schema for wb-mqtt-confed... Stopping WPA supplicant... [ OK ] Stopped Load/Save RF Kill Switch Status. [ OK ] Stopped Bluetooth service. [ OK ] Stopped Regular background program processing daemon. [ OK ] Stopped Network Manager. [ OK ] Stopped Authorization Manager. [ OK ] Stopped User Login Management. [ OK ] Stopped Initialize Wiren Board Device Tree overlays. [ OK ] Stopped Avahi mDNS/DNS-SD Stack. [ OK ] Stopped WPA supplicant. [ OK ] Stopped Load/Save Random Seed. [ OK ] Stopped target Remote File Systems. [ OK ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch. Stopping D-Bus System Message Bus... Stopping watch config files... [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped watch config files. [ OK ] Stopped Generates wb-mqtt-￢ﾀﾦ UI schema for wb-mqtt-confed. [ OK ] Stopped target Basic System. [ OK ] Stopped target Paths. [ OK ] Stopped Monitor directorie￢ﾀﾦ templates for wb-mqtt-serial. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Sockets. [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Closed fcgiwrap Socket. [ OK ] Closed KNX Daemon (socket). [ OK ] Stopped target System Initialization. [ OK ] Stopped target Local Encrypted Volumes. [ OK ] Stopped Dispatch Password ￢ﾀﾦts to Console Directory Watch. [ OK ] Stopped Forward Password R￢ﾀﾦuests to Wall Directory Watch. [ OK ] Stopped target Swap. Deactivating swap /dev/dis￢ﾀﾦmmc-MMC64G_0x6d673fe4-part5... [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Load Kernel Modules. Stopping Update UTMP about System Boot/Shutdown... [ OK ] Deactivated swap /dev/disk￢ﾀﾦth/platform-1c11000.mmc-part5. [ OK ] Deactivated swap /dev/disk￢ﾀﾦ8-da56-4063-b4e1-cfc560627ee2. [ OK ] Deactivated swap /dev/disk￢ﾀﾦd/mmc-MMC64G_0x6d673fe4-part5. [ OK ] Deactivated swap /dev/disk/by-partuuid/7543c382-05. [ OK ] Deactivated swap /dev/mmcblk0p5. [ OK ] Stopped Update UTMP about System Boot/Shutdown. [ OK ] Stopped Create Volatile Files and Directories. Stopping Flush Journal to Persistent Storage... [ 27.511450] systemd-journald[137]: Received client request to relinquish /va. Stopping prepare mounts and symlinks to config files... [ OK ] Stopped prepare mounts and symlinks to config files. [ OK ] Stopped Flush Journal to Persistent Storage. [ OK ] Stopped target Local File Systems. [ OK ] Unset automount mnt-sdcard.automount. Unmounting /var/log... [ OK ] Unmounted /var/log. Unmounting /mnt/data... [ OK ] Unmounted /mnt/data. [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped File System Check on /dev/mmcblk0p6. [ OK ] Removed slice system-systemd\x2dfsck.slice. [ OK ] Stopped target Local File Systems (Pre). [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Create System Users. [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Stopped File System Check on Root Device. [ OK ] Reached target Shutdown. [ OK ] Reached target Final Step. [ OK ] Finished Power-Off. [ OK ] Reached target Power-Off. [ 28.427035] systemd-shutdown[1]: Syncing filesystems and block devices. [ 28.577951] systemd-shutdown[1]: Sending SIGTERM to remaining processes... [ 28.629713] systemd-journald[137]: Received SIGTERM from PID 1 (systemd-shut. [ 28.643128] systemd-shutdown[1]: Sending SIGKILL to remaining processes... [ 28.665804] systemd-shutdown[1]: Unmounting file systems. [ 28.675770] [491]: Remounting '/' read-only in with options 'discard,errors=. [ 28.694709] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro4 [ 28.715596] systemd-shutdown[1]: All filesystems unmounted. [ 28.721205] systemd-shutdown[1]: Deactivating swaps. [ 28.726528] systemd-shutdown[1]: All swaps deactivated. [ 28.731763] systemd-shutdown[1]: Detaching loop devices. [ 28.743213] systemd-shutdown[1]: All loop devices detached. [ 28.748813] systemd-shutdown[1]: Stopping MD devices. [ 28.754375] systemd-shutdown[1]: All MD devices stopped. [ 28.759703] systemd-shutdown[1]: Detaching DM devices. [ 28.765320] systemd-shutdown[1]: All DM devices detached. [ 28.770735] systemd-shutdown[1]: All filesystems, swaps, loop devices, MD de. [ 28.793370] systemd-shutdown[1]: Syncing filesystems and block devices. [ 28.800124] systemd-shutdown[1]: Powering off. [ 28.804986] RTW: stop cmd thread during rtw_dev_shutdown [ 28.810392] RTW: cmd thread is stopped during rtw_dev_shutdown [ 28.824251] reboot: Power down [EC] Power off request from Linux. [EC] Alarm: not set [EC] Power status: powered from external supply [EC] Powering off [EC] 5V line status: voltage present [EC] Power off and go to standby now￭