▒▒[ 41.682808] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 41.971602] usb 3-1: USB disconnect, device number 2 [ 44.623367] process '/usr/sbin/netplugd' started with executable stack wirenboard-A675XKKL login: [ 47.862881] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 48.127947] usbcore: registered new interface driver cdc_ether [ 48.131244] usbcore: registered new interface driver option [ 48.139841] usbserial: USB Serial support registered for GSM modem (1-port) [ 48.151293] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 8a:f6:2a:f3:9e:0a [ 48.172335] usbcore: registered new interface driver rndis_host [ 48.172450] option 3-1:1.2: GSM modem (1-port) converter detected [ 48.193871] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 48.201326] option 3-1:1.4: GSM modem (1-port) converter detected [ 48.208553] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 48.215948] option 3-1:1.5: GSM modem (1-port) converter detected [ 48.223073] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 48.230420] option 3-1:1.3: GSM modem (1-port) converter detected [ 48.237859] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 root Password: Login incorrect wirenboard-A675XKKL login: root Password: _ _ _ __ _(_)_ __ ___ _ __ | |__ ___ __ _ _ __ __| | \ \ /\ / / | '__/ _ \ '_ \| '_ \ / _ \ / _` | '__/ _` | \ V V /| | | | __/ | | | |_) | (_) | (_| | | | (_| | \_/\_/ |_|_| \___|_| |_|_.__/ \___/ \__,_|_| \__,_| Welcome to Wiren Board 7.4.3 (s/n A675XKKL), release wb-2407 (as stable) Linux wirenboard-A675XKKL 5.10.35-wb169 #1 SMP Wed Aug 7 14:39:59 UTC 2024 armv7l GNU/Linux System load: 3.65 1.17 0.41 Up time: 1 min Memory usage: 14% of 997M Usage of /: 37% of 2.0G /mnt/data: 24% of 4.9G Last login: Tue Nov 12 13:33:50 MSK 2024 from 127.0.0.1 on pts/3 root@wirenboard-A675XKKL:~# if [EC] Watchdog is timed out, reset power. U-Boot SPL 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) DRAM: 1024 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 1 ms (318.4 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502424 bytes read in 139 ms (44.6 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57723 bytes read in 4 ms (13.8 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x633818 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb169 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Aug 7 14:39:59 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x7ec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000021] Switching to timer-based delay loop, resolution 41ns [ 0.000356] Console: colour dummy device 80x30 [ 0.000426] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000455] pid_max: default: 32768 minimum: 301 [ 0.000691] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000717] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001894] CPU: Testing write buffer coherency: ok [ 0.002315] /cpus/cpu@0 missing clock-frequency property [ 0.002358] /cpus/cpu@1 missing clock-frequency property [ 0.002399] /cpus/cpu@2 missing clock-frequency property [ 0.002444] /cpus/cpu@3 missing clock-frequency property [ 0.002462] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003524] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.003722] rcu: Hierarchical SRCU implementation. [ 0.004646] smp: Bringing up secondary CPUs ... [ 0.015754] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.026992] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.038129] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.038310] smp: Brought up 1 node, 4 CPUs [ 0.038347] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.038360] CPU: All CPU(s) started in HYP mode. [ 0.038371] CPU: Virtualization extensions available. [ 0.039357] devtmpfs: initialized [ 0.052576] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.052873] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.052909] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.053876] pinctrl core: initialized pinctrl subsystem [ 0.055418] NET: Registered protocol family 16 [ 0.057910] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.059200] thermal_sys: Registered thermal governor 'step_wise' [ 0.059715] No ATAGs? [ 0.059946] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.059962] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.110161] SCSI subsystem initialized [ 0.110427] usbcore: registered new interface driver usbfs [ 0.110489] usbcore: registered new interface driver hub [ 0.110559] usbcore: registered new device driver usb [ 0.110946] mc: Linux media interface: v0.10 [ 0.110995] videodev: Linux video capture interface: v2.00 [ 0.111068] pps_core: LinuxPPS API ver. 1 registered [ 0.111082] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.111110] PTP clock support registered [ 0.111404] Advanced Linux Sound Architecture Driver Initialized. [ 0.112577] clocksource: Switched to clocksource arch_sys_counter [ 0.751780] NET: Registered protocol family 2 [ 0.752750] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.752806] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.752887] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.753010] TCP: Hash tables configured (established 8192 bind 8192) [ 0.753168] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.753243] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.753497] NET: Registered protocol family 1 [ 0.754280] RPC: Registered named UNIX socket transport module. [ 0.754304] RPC: Registered udp transport module. [ 0.754317] RPC: Registered tcp transport module. [ 0.754329] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.755954] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.757579] Initialise system trusted keyrings [ 0.757847] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.766757] NFS: Registering the id_resolver key type [ 0.766822] Key type id_resolver registered [ 0.766836] Key type id_legacy registered [ 0.862200] Key type asymmetric registered [ 0.862228] Asymmetric key parser 'x509' registered [ 0.862375] bounce: pool size: 64 pages [ 0.862457] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.862474] io scheduler mq-deadline registered [ 0.862488] io scheduler kyber registered [ 0.863756] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.887550] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.901924] brd: module loaded [ 0.912981] loop: module loaded [ 0.918743] libphy: Fixed MDIO Bus: probed [ 0.919915] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 0.920552] libphy: sun4i_mii_bus: probed [ 0.922666] CAN device driver interface [ 0.924785] PPP generic driver version 2.4.2 [ 0.925041] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.925059] ehci-platform: EHCI generic platform driver [ 0.926076] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.926114] ohci-platform: OHCI generic platform driver [ 0.927188] usbcore: registered new interface driver usb-storage [ 0.927303] usbcore: registered new interface driver usbserial_generic [ 0.927345] usbserial: USB Serial support registered for generic [ 0.929380] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 0.929402] sun6i-rtc 1c20400.rtc: RTC enabled [ 0.930057] i2c /dev entries driver [ 0.936644] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.939759] ledtrig-cpu: registered to indicate activity on CPUs [ 0.940387] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 0.940720] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.941356] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.941570] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.941770] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.941933] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 0.942145] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 0.942330] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 0.942524] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 0.942848] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 0.944679] usbcore: registered new interface driver usbhid [ 0.944697] usbhid: USB HID core driver [ 0.950596] Initializing XFRM netlink socket [ 0.951299] NET: Registered protocol family 10 [ 0.952415] Segment Routing with IPv6 [ 0.952629] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.953380] NET: Registered protocol family 17 [ 0.953411] can: controller area network core [ 0.953516] NET: Registered protocol family 29 [ 0.953531] can: raw protocol [ 0.953545] can: broadcast manager protocol [ 0.953566] can: netlink gateway - max_hops=1 [ 0.953725] can: SAE J1939 [ 0.954062] Key type dns_resolver registered [ 0.954155] Registering SWP/SWPB emulation handler [ 0.954274] registered taskstats version 1 [ 0.954334] Loading compiled-in X.509 certificates [ 0.974481] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.978987] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.979784] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 0.983809] printk: console [ttyS0] disabled [ 0.983959] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i [ 1.923859] printk: console [ttyS0] enabled [ 1.929072] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 1.935906] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 1.942520] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 1.949858] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 1.960559] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 1.974721] wbec-rtc wbec-rtc.4.auto: DMA mask not set [ 1.981260] wbec-rtc wbec-rtc.4.auto: registered as rtc0 [ 1.986869] wbec-rtc wbec-rtc.4.auto: setting system clock to 2024-11-13T12:35:33 UTC (1731501333) [ 1.998178] wbec spi0.0: WBEC device added [ 2.002945] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.010968] libphy: sun4i_mii_bus: probed [ 2.016004] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.022835] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.029451] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.038903] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.045720] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.052334] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.059838] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.070367] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.078740] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.085560] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.092001] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.099320] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.109671] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.124323] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.140438] vcc-3v3: supplied by regulator-dummy [ 2.146053] vdd-cpu: supplied by regulator-dummy [ 2.151548] vdd-sys: supplied by regulator-dummy [ 2.157185] dcdc4: supplied by regulator-dummy [ 2.162529] vcc-dram: supplied by regulator-dummy [ 2.167414] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.174421] vcc-gmac-phy: supplied by vcc-3v3 [ 2.179852] dc5ldo: supplied by vcc-dram [ 2.184401] tv: Bringing 700000uV into 3300000-3300000uV [ 2.190359] tv: supplied by regulator-dummy [ 2.195183] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.201497] aldo2: supplied by regulator-dummy [ 2.207300] avcc-pll: supplied by regulator-dummy [ 2.212962] eldo1: supplied by regulator-dummy [ 2.218332] eldo2: supplied by regulator-dummy [ 2.223445] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.230314] vcc-pe: supplied by regulator-dummy [ 2.235467] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.242449] vcc-sd-alt: supplied by regulator-dummy [ 2.248285] dldo2: supplied by regulator-dummy [ 2.253707] dldo3: supplied by regulator-dummy [ 2.259086] dldo4: supplied by regulator-dummy [ 2.264102] rtc_ldo: supplied by regulator-dummy [ 2.269105] random: fast init done [ 2.273001] ldo_io0: supplied by regulator-dummy [ 2.278538] ldo_io1: supplied by regulator-dummy [ 2.283934] axp20x-adc axp22x-adc: DMA mask not set [ 2.290623] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 2.301100] axp20x-i2c 0-0034: AXP20X driver loaded [ 2.340404] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 2.348248] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i [ 2.358718] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.362404] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 2.366705] libphy: sun4i_mii_bus: probed [ 2.499826] mmc0: new DDR MMC card at address 0001 [ 2.505538] mmcblk0: mmc0:0001 88A398 7.28 GiB [ 2.510476] mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB [ 2.516398] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:35:6b [ 2.517351] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 2.525090] mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB [ 2.531038] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 2.537293] mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0) [ 2.543398] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 2.556386] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 2.563662] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 2.570882] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 2.575873] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 2.582672] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 2.588328] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 2.594708] libphy: stmmac: probed [ 2.599233] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.855127] ehci-platform 1c14000.usb: EHCI Host Controller [ 2.860741] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 2.868976] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 2.902586] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 2.909700] hub 1-0:1.0: USB hub found [ 2.913571] hub 1-0:1.0: 1 port detected [ 2.918723] ehci-platform 1c19000.usb: EHCI Host Controller [ 2.924358] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 2.932358] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 2.962585] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 2.969631] hub 2-0:1.0: USB hub found [ 2.973463] hub 2-0:1.0: 1 port detected [ 2.978550] ehci-platform 1c1c000.usb: EHCI Host Controller [ 2.984168] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 2.992145] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.023056] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.030018] hub 3-0:1.0: USB hub found [ 3.033847] hub 3-0:1.0: 1 port detected [ 3.132674] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.139312] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.147288] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 3.227477] hub 4-0:1.0: USB hub found [ 3.231281] hub 4-0:1.0: 1 port detected [ 3.236391] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 3.243052] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 3.251072] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 3.327461] hub 5-0:1.0: USB hub found [ 3.331269] hub 5-0:1.0: 1 port detected [ 3.336377] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 3.343040] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 3.350998] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 3.357064] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 3.427482] hub 6-0:1.0: USB hub found [ 3.431292] hub 6-0:1.0: 1 port detected [ 3.444243] of_cfs_init [ 3.446822] of_cfs_init: OK [ 3.450310] ALSA device list: [ 3.453323] No soundcards found. [ 3.465896] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 3.482886] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 3.490225] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 3.546166] EXT4-fs (mmcblk0p2): recovery complete [ 3.551511] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.559730] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.567568] devtmpfs: mounted [ 3.575505] Freeing unused kernel memory: 1024K [ 3.580318] Run /sbin/init as init process [ 3.835034] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 3.859322] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 3.905756] systemd[1]: Set hostname to . [ 4.688856] systemd[1]: Queued start job for default target Graphical Interface. [ 4.698236] random: systemd: uninitialized urandom read (16 bytes read) [ 4.709000] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.742915] random: systemd: uninitialized urandom read (16 bytes read) [ 4.751487] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 4.792855] random: systemd: uninitialized urandom read (16 bytes read) [ 4.801619] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.844597] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 4.884387] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.923273] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 4.963089] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.003072] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.015108] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.053294] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.082861] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.122749] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.153948] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.193237] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 5.243993] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 5.253288] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.293744] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.326829] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.363589] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.403706] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 5.417755] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.458763] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 5.498827] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 5.539421] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 5.580826] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 5.629980] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 5.669906] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 5.693518] fuse: init (API version 7.32) [ 5.709910] systemd[1]: Starting nftables... Starting nftables... [ 5.745327] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.761602] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 5.815560] systemd[1]: Starting Journal Service... Starting Journal Service... [ 5.831902] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 5.847671] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 5.872174] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 5.880145] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 5.890806] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System 5.902751] systemd[1]: Mounted Kernel Trace File System. m. [ OK ] Mounted Kernel Trace File System 5.915388] systemd[1]: Finished Create list of static device nodes for the current kernel. m. [ OK ] Finished Create list of st… nodes for the current kernel. [ 5.997160] systemd[1]: modprobe@drm.service: Succeeded. [ 6.004650] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.055199] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.062171] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 6.103641] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ OK ] Finished nftables. [ 6.375514] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 7.376210] Driver for 1-wire Dallas network protocol. [ 7.649228] wbec-power wbec-power.6.auto: DMA mask not set [ 7.653325] wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set [ 7.660716] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0 [ 7.672786] usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator [ 7.683656] wbec-adc wbec-adc.1.auto: DMA mask not set [ 7.691376] iio-rescale vin-volt: using raw+scale source channel [ 7.691875] wbec-gpio wbec-gpio.2.auto: DMA mask not set [ 7.698919] iio-rescale v33-volt: using raw+scale source channel [ 7.710030] iio-rescale v50-volt: using raw+scale source channel [ 7.721621] iio-rescale vbus-debug-volt: using raw+scale source channel [ 7.729535] iio-rescale vbus-network-volt: using raw+scale source channel [ 7.745596] iio-rescale a1-volt: using raw+scale source channel [ 7.752518] iio-rescale a2-volt: using raw+scale source channel [ 7.759606] iio-rescale a3-volt: using raw+scale source channel [ 7.774541] iio-rescale a4-volt: using raw+scale source channel [ 7.790609] wbec-watchdog wbec-watchdog.3.auto: DMA mask not set [ 7.860224] Bluetooth: Core ver 2.22 [ 7.864333] NET: Registered protocol family 31 [ 7.868890] Bluetooth: HCI device and connection manager initialized [ 7.875479] Bluetooth: HCI socket layer initialized [ 7.880497] Bluetooth: L2CAP socket layer initialized [ 7.885882] Bluetooth: SCO socket layer initialized [ 7.916961] usbcore: registered new interface driver btusb [ 7.937708] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723 [ 7.956527] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 7.963054] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin [ 7.972340] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin [ 7.979973] Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507 [ 8.019917] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.123200] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.138379] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 8.402293] RTW: rtl8733bu v5.13.0.1-112-g10248f4f3.20230626_COEX20230616-330e [ 8.409701] RTW: rtl8733bu BT-Coex version = COEX20230616-330e [ 8.416014] Bluetooth: hci0: RTL: fw version 0xd9b80b4f [ 8.421644] RTW: [HALMAC]135 [ 8.421644] HALMAC_MAJOR_VER = 1 [ 8.421644] HALMAC_PROTOTYPE_VER = 6 [ 8.421644] HALMAC_MINOR_VER = 6 [ 8.421644] HALMAC_PATCH_VER = 39 [ OK ] Found device /dev/mmcblk0p5. [ 8.583799] RTW: hal_com_config_channel_plan chplan:0x7F [ OK ] Found device /dev/mmcblk0p6. [ OK ] Found device /dev/ttyS0. [ 8.765770] RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:46:be:ec [ 8.773936] RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:46:be:ec [ 8.782021] usbcore: registered new interface driver rtl8733bu [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... Starting Load/Save RF Kill Switch Status... [ 9.202718] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Reached target Swap. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 9.398644] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 9.574443] systemd-journald[141]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config files... [ 9.592319] systemd-journald[141]: File /var/log/journal/6eb89b0c4878450b818245bc16d7a857/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Flush Journal to Persistent Storage. [ 9.792685] random: crng init done [ 9.796137] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Authorization Manager... Starting User Login Management... [ 11.405213] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.410573] Bluetooth: BNEP filters: protocol multicast [ 11.416024] Bluetooth: BNEP socket layer initialized [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Bluetooth service. [ OK ] Started Authorization Manager. [ OK ] Started WPA supplicant. [ OK ] Started User Login Management. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. [ 17.500674] mcp230xx 1-0027: error -ENXIO: can't write IOCON 39 [ 18.649650] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 131, base_baud = 3000000) is a Allwinner sun4i [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Started Power on GSM modem. [ OK ] Reached target Network (Pre). Starting Network Manager... Starting Raise network interfaces... [ OK ] Finished Raise network interfaces. [ OK ] Started Network Manager. [ OK ] Reached target Network. Starting Network Manager Wait Online... Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started KNX Daemon. [ OK ] Finished KNXD Configurator for Wiren Board. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ 27.034452] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 27.055952] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 27.063431] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 27.071141] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ OK ] Started Network Time Service. [ 27.091542] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ OK ] Finished Permit User Sessions. [ OK ] Reached target Host and Network Name Lookups. Starting Network Manager Script Dispatcher Service... [ OK ] Started Getty on tty1. Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Started MQTT Driver for GPIO-controlled switches. [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Finished Compensation of s…ice-tree (with opposite sign). [ 28.161759] start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384) [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started A high performance…er and a reverse proxy server. Starting USB Debug Network... [ OK ] Stopped MQTT Driver for GPIO-controlled switches. Starting MQTT Driver for GPIO-controlled switches... [ 31.620493] Mass Storage Function, version: 2009/09/11 [ 31.625880] LUN: removable file: (no medium) [ 31.662053] using random self ethernet address [ 31.666783] using random host ethernet address [ 31.845740] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 31.850409] dbg0: MAC 1a:55:89:a2:69:43 [ OK ] Finished USB Debug Network. [ OK ] Started MQTT Driver for GPIO-controlled switches. Debian GNU/Linux 11 wirenboard-A675XKKL ttyS0 wirenboard-A675XKKL login: [ 33.763086] vcc-gmac-phy: disabling [ 33.768242] dc5ldo: disabling [ 33.772540] dldo4: disabling [ 33.776645] vdd-sd-power: disabling [ 33.780261] vcc-sd: disabling [ 41.652825] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 41.949105] usb 3-1: USB disconnect, device number 2 [ 45.339344] process '/usr/sbin/netplugd' started with executable stack [ 47.833202] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 48.150184] usbcore: registered new interface driver cdc_ether [ 48.176506] usbcore: registered new interface driver option [ 48.182484] usbserial: USB Serial support registered for GSM modem (1-port) [ 48.192469] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 72:27:66:b3:cc:88 [ 48.203185] usbcore: registered new interface driver rndis_host [ 48.223927] option 3-1:1.2: GSM modem (1-port) converter detected [ 48.236499] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 48.244643] option 3-1:1.4: GSM modem (1-port) converter detected [ 48.273621] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 48.281039] option 3-1:1.5: GSM modem (1-port) converter detected [ 48.293601] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 48.301108] option 3-1:1.3: GSM modem (1-port) converter detected [ 48.318726] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 73.281991] PPP BSD Compression module registered [ 73.304327] PPP Deflate Compression module registered root Password: _ _ _ __ _(_)_ __ ___ _ __ | |__ ___ __ _ _ __ __| | \ \ /\ / / | '__/ _ \ '_ \| '_ \ / _ \ / _` | '__/ _` | \ V V /| | | | __/ | | | |_) | (_) | (_| | | | (_| | \_/\_/ |_|_| \___|_| |_|_.__/ \___/ \__,_|_| \__,_| Welcome to Wiren Board 7.4.3 (s/n A675XKKL), release wb-2407 (as stable) Linux wirenboard-A675XKKL 5.10.35-wb169 #1 SMP Wed Aug 7 14:39:59 UTC 2024 armv7l GNU/Linux System load: 3.53 1.25 0.45 Up time: 1 min Memory usage: 13% of 997M Usage of /: 37% of 2.0G /mnt/data: 24% of 4.9G Last login: Tue Nov 12 13:33:50 MSK 2024 from 127.0.0.1 on pts/3 root@wirenboard-A675XKKL:~# ifconfig dbg0: flags=4099 mtu 1500 ether 1a:55:89:a2:69:43 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0: flags=4099 mtu 1500 inet 192.168.0.100 netmask 255.255.255.0 broadcast 192.168.0.255 inet6 fe80::d367:98e0:b718:ee8 prefixlen 64 scopeid 0x20 ether 00:85:01:01:35:6b txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 66 base 0x7000 eth1: flags=4099 mtu 1500 ether 00:85:01:01:f7:f3 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 65 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 433 bytes 27987 (27.3 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 433 bytes 27987 (27.3 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ppp0: flags=4305 mtu 1500 inet 10.34.99.52 netmask 255.255.255.255 destination 10.64.64.64 ppp txqueuelen 3 (Point-to-Point Protocol) RX packets 142 bytes 20412 (19.9 KiB) RX errors 1 dropped 0 overruns 0 frame 0 TX packets 225 bytes 20728 (20.2 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlan0: flags=4099 mtu 1500 ether 98:03:cf:46:be:ec txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlan1: flags=4099 mtu 1500 ether 9a:03:cf:46:be:ec txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@wirenboard-A675XKKL:~# [EC] Watchdog is timed out, reset power. U-Boot SPL 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) DRAM: 1024 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 1 ms (318.4 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502424 bytes read in 139 ms (44.6 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57723 bytes read in 4 ms (13.8 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x633818 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb169 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Aug 7 14:39:59 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x7ec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000021] Switching to timer-based delay loop, resolution 41ns [ 0.000357] Console: colour dummy device 80x30 [ 0.000430] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000460] pid_max: default: 32768 minimum: 301 [ 0.000697] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000724] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001898] CPU: Testing write buffer coherency: ok [ 0.002326] /cpus/cpu@0 missing clock-frequency property [ 0.002369] /cpus/cpu@1 missing clock-frequency property [ 0.002410] /cpus/cpu@2 missing clock-frequency property [ 0.002456] /cpus/cpu@3 missing clock-frequency property [ 0.002473] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003536] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.003738] rcu: Hierarchical SRCU implementation. [ 0.004658] smp: Bringing up secondary CPUs ... [ 0.015748] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.026990] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.038118] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.038296] smp: Brought up 1 node, 4 CPUs [ 0.038330] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.038343] CPU: All CPU(s) started in HYP mode. [ 0.038354] CPU: Virtualization extensions available. [ 0.039351] devtmpfs: initialized [ 0.052586] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.052887] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.052921] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.053895] pinctrl core: initialized pinctrl subsystem [ 0.055434] NET: Registered protocol family 16 [ 0.057991] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.059218] thermal_sys: Registered thermal governor 'step_wise' [ 0.059722] No ATAGs? [ 0.059952] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.059968] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.110202] SCSI subsystem initialized [ 0.110472] usbcore: registered new interface driver usbfs [ 0.110533] usbcore: registered new interface driver hub [ 0.110605] usbcore: registered new device driver usb [ 0.110995] mc: Linux media interface: v0.10 [ 0.111044] videodev: Linux video capture interface: v2.00 [ 0.111118] pps_core: LinuxPPS API ver. 1 registered [ 0.111132] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.111160] PTP clock support registered [ 0.111455] Advanced Linux Sound Architecture Driver Initialized. [ 0.112624] clocksource: Switched to clocksource arch_sys_counter [ 0.751867] NET: Registered protocol family 2 [ 0.752951] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.753012] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.753093] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.753214] TCP: Hash tables configured (established 8192 bind 8192) [ 0.753378] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.753451] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.753711] NET: Registered protocol family 1 [ 0.754464] RPC: Registered named UNIX socket transport module. [ 0.754488] RPC: Registered udp transport module. [ 0.754501] RPC: Registered tcp transport module. [ 0.754513] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.756146] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.757774] Initialise system trusted keyrings [ 0.758050] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.766841] NFS: Registering the id_resolver key type [ 0.766910] Key type id_resolver registered [ 0.766924] Key type id_legacy registered [ 0.862679] Key type asymmetric registered [ 0.862707] Asymmetric key parser 'x509' registered [ 0.862855] bounce: pool size: 64 pages [ 0.862935] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.862954] io scheduler mq-deadline registered [ 0.862966] io scheduler kyber registered [ 0.864150] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.888031] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.902301] brd: module loaded [ 0.913347] loop: module loaded [ 0.919080] libphy: Fixed MDIO Bus: probed [ 0.920260] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 0.920898] libphy: sun4i_mii_bus: probed [ 0.923101] CAN device driver interface [ 0.925209] PPP generic driver version 2.4.2 [ 0.925462] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.925479] ehci-platform: EHCI generic platform driver [ 0.926498] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.926532] ohci-platform: OHCI generic platform driver [ 0.927613] usbcore: registered new interface driver usb-storage [ 0.927732] usbcore: registered new interface driver usbserial_generic [ 0.927772] usbserial: USB Serial support registered for generic [ 0.929807] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 0.929828] sun6i-rtc 1c20400.rtc: RTC enabled [ 0.930516] i2c /dev entries driver [ 0.937038] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.940143] ledtrig-cpu: registered to indicate activity on CPUs [ 0.940774] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 0.941111] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.941748] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.941956] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.942150] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.942311] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 0.942517] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 0.942786] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 0.942980] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 0.943186] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 0.945019] usbcore: registered new interface driver usbhid [ 0.945039] usbhid: USB HID core driver [ 0.950912] Initializing XFRM netlink socket [ 0.951613] NET: Registered protocol family 10 [ 0.952779] Segment Routing with IPv6 [ 0.952921] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.953668] NET: Registered protocol family 17 [ 0.953699] can: controller area network core [ 0.953804] NET: Registered protocol family 29 [ 0.953820] can: raw protocol [ 0.953834] can: broadcast manager protocol [ 0.953855] can: netlink gateway - max_hops=1 [ 0.954006] can: SAE J1939 [ 0.954337] Key type dns_resolver registered [ 0.954430] Registering SWP/SWPB emulation handler [ 0.954551] registered taskstats version 1 [ 0.954612] Loading compiled-in X.509 certificates [ 0.974716] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.979141] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.979941] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 0.983905] printk: console [ttyS0] disabled [ 0.984055] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i [ 1.924012] printk: console [ttyS0] enabled [ 1.929210] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 1.936045] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 1.942687] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 1.949996] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 1.960696] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 1.974865] wbec-rtc wbec-rtc.4.auto: DMA mask not set [ 1.981396] wbec-rtc wbec-rtc.4.auto: registered as rtc0 [ 1.987005] wbec-rtc wbec-rtc.4.auto: setting system clock to 2024-11-13T12:37:34 UTC (1731501454) [ 1.998358] wbec spi0.0: WBEC device added [ 2.003114] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.011139] libphy: sun4i_mii_bus: probed [ 2.016156] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.023006] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.029623] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.039060] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.045884] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.052498] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.060002] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.070530] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.078912] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.085736] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.092177] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.099502] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.109857] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.124551] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.140664] vcc-3v3: supplied by regulator-dummy [ 2.146308] vdd-cpu: supplied by regulator-dummy [ 2.151798] vdd-sys: supplied by regulator-dummy [ 2.157437] dcdc4: supplied by regulator-dummy [ 2.162819] vcc-dram: supplied by regulator-dummy [ 2.167668] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.174686] vcc-gmac-phy: supplied by vcc-3v3 [ 2.180128] dc5ldo: supplied by vcc-dram [ 2.184675] tv: Bringing 700000uV into 3300000-3300000uV [ 2.190635] tv: supplied by regulator-dummy [ 2.195459] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.201773] aldo2: supplied by regulator-dummy [ 2.207577] avcc-pll: supplied by regulator-dummy [ 2.213251] eldo1: supplied by regulator-dummy [ 2.218616] eldo2: supplied by regulator-dummy [ 2.223728] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.230596] vcc-pe: supplied by regulator-dummy [ 2.235757] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.242760] vcc-sd-alt: supplied by regulator-dummy [ 2.248572] dldo2: supplied by regulator-dummy [ 2.253996] dldo3: supplied by regulator-dummy [ 2.259370] dldo4: supplied by regulator-dummy [ 2.264374] rtc_ldo: supplied by regulator-dummy [ 2.269375] random: fast init done [ 2.273269] ldo_io0: supplied by regulator-dummy [ 2.278784] ldo_io1: supplied by regulator-dummy [ 2.284181] axp20x-adc axp22x-adc: DMA mask not set [ 2.290879] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 2.301363] axp20x-i2c 0-0034: AXP20X driver loaded [ 2.340469] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 2.348303] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i [ 2.358806] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.362289] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 2.366810] libphy: sun4i_mii_bus: probed [ 2.499726] mmc0: new DDR MMC card at address 0001 [ 2.505461] mmcblk0: mmc0:0001 88A398 7.28 GiB [ 2.510393] mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB [ 2.516440] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:35:6b [ 2.516814] mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB [ 2.525740] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 2.530857] mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0) [ 2.536982] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 2.550773] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 2.556926] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 2.564205] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 2.571445] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 2.576438] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 2.583239] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 2.588895] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 2.595274] libphy: stmmac: probed [ 2.599237] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.865203] ehci-platform 1c14000.usb: EHCI Host Controller [ 2.870819] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 2.879028] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 2.912625] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 2.919724] hub 1-0:1.0: USB hub found [ 2.923586] hub 1-0:1.0: 1 port detected [ 2.928732] ehci-platform 1c19000.usb: EHCI Host Controller [ 2.934366] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 2.942369] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 2.972625] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 2.979679] hub 2-0:1.0: USB hub found [ 2.983514] hub 2-0:1.0: 1 port detected [ 2.988610] ehci-platform 1c1c000.usb: EHCI Host Controller [ 2.994229] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.002205] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.033116] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.040082] hub 3-0:1.0: USB hub found [ 3.043905] hub 3-0:1.0: 1 port detected [ 3.142715] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.149353] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.157320] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 3.237509] hub 4-0:1.0: USB hub found [ 3.241318] hub 4-0:1.0: 1 port detected [ 3.246457] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 3.253145] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 3.261139] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 3.337492] hub 5-0:1.0: USB hub found [ 3.341298] hub 5-0:1.0: 1 port detected [ 3.346394] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 3.353066] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 3.360863] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 3.368139] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 3.447516] hub 6-0:1.0: USB hub found [ 3.451320] hub 6-0:1.0: 1 port detected [ 3.465594] of_cfs_init [ 3.468169] of_cfs_init: OK [ 3.471683] ALSA device list: [ 3.474724] No soundcards found. [ 3.488410] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 3.505414] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 3.512803] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 3.573083] EXT4-fs (mmcblk0p2): recovery complete [ 3.578623] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.586869] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.594356] devtmpfs: mounted [ 3.602271] Freeing unused kernel memory: 1024K [ 3.607116] Run /sbin/init as init process [ 3.857877] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 3.882408] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 3.927145] systemd[1]: Set hostname to . [ 4.702079] systemd[1]: Queued start job for default target Graphical Interface. [ 4.711388] random: systemd: uninitialized urandom read (16 bytes read) [ 4.722171] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.763284] random: systemd: uninitialized urandom read (16 bytes read) [ 4.771869] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 4.812864] random: systemd: uninitialized urandom read (16 bytes read) [ 4.821615] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.864650] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 4.904480] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.943312] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 4.983124] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.023073] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.035117] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.073264] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.102884] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.142857] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.174019] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.213174] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 5.263816] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 5.273115] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.313824] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.355856] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.393564] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.433794] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 5.447915] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.489091] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 5.528981] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 5.569449] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 5.610830] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 5.660043] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 5.700088] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 5.730224] fuse: init (API version 7.32) [ 5.741395] systemd[1]: Starting nftables... Starting nftables... [ 5.775283] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.791712] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 5.845484] systemd[1]: Starting Journal Service... Starting Journal Service... [ 5.861609] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 5.877450] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 5.902201] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 5.910637] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 5.921545] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System 5.933506] systemd[1]: Mounted Kernel Trace File System. m. [ OK ] Mounted Kernel Trace File System 5.945932] systemd[1]: Finished Create list of static device nodes for the current kernel. m. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.027646] systemd[1]: modprobe@drm.service: Succeeded. [ 6.035232] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.075257] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.082363] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 6.123912] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 6.376614] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Finished nftables. [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 7.437014] Driver for 1-wire Dallas network protocol. [ 7.653489] usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator [ 7.764012] wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set [ 7.770020] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0 [ 7.776624] wbec-power wbec-power.6.auto: DMA mask not set [ 7.807151] wbec-adc wbec-adc.1.auto: DMA mask not set [ 7.816917] wbec-gpio wbec-gpio.2.auto: DMA mask not set [ 7.825080] iio-rescale vin-volt: using raw+scale source channel [ 7.832848] iio-rescale v33-volt: using raw+scale source channel [ 7.842547] wbec-watchdog wbec-watchdog.3.auto: DMA mask not set [ 7.854189] iio-rescale v50-volt: using raw+scale source channel [ 7.862663] iio-rescale vbus-debug-volt: using raw+scale source channel [ 7.876194] iio-rescale vbus-network-volt: using raw+scale source channel [ 7.887148] iio-rescale a1-volt: using raw+scale source channel [ 7.897823] iio-rescale a2-volt: using raw+scale source channel [ 7.910754] iio-rescale a3-volt: using raw+scale source channel [ 7.939732] iio-rescale a4-volt: using raw+scale source channel [ 7.955339] Bluetooth: Core ver 2.22 [ 7.959095] NET: Registered protocol family 31 [ 7.963726] Bluetooth: HCI device and connection manager initialized [ 7.970118] Bluetooth: HCI socket layer initialized [ 7.975093] Bluetooth: L2CAP socket layer initialized [ 7.980210] Bluetooth: SCO socket layer initialized [ 8.032215] usbcore: registered new interface driver btusb [ 8.046732] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723 [ 8.057659] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 8.063838] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin [ 8.068662] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.073128] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin [ 8.085717] Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507 [ 8.173966] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.196270] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/mmcblk0p6. [ OK ] Found device /dev/ttyS0. [ 8.461081] RTW: rtl8733bu v5.13.0.1-112-g10248f4f3.20230626_COEX20230616-330e [ 8.468499] RTW: rtl8733bu BT-Coex version = COEX20230616-330e [ 8.498517] RTW: [HALMAC]135 [ 8.498517] HALMAC_MAJOR_VER = 1 [ 8.498517] HALMAC_PROTOTYPE_VER = 6 [ 8.498517] HALMAC_MINOR_VER = 6 [ 8.498517] HALMAC_PATCH_VER = 39 [ 8.516716] Bluetooth: hci0: RTL: fw version 0xd9b80b4f Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... [ 8.764937] RTW: hal_com_config_channel_plan chplan:0x7F [ 8.812714] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Starting Load/Save RF Kill Switch Status... [ 8.985311] RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:46:be:ec [ 8.993685] RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:46:be:ec [ 9.001994] usbcore: registered new interface driver rtl8733bu [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 9.221928] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 9.394569] systemd-journald[141]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config files... [ 9.411820] systemd-journald[141]: File /var/log/journal/6eb89b0c4878450b818245bc16d7a857/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Flush Journal to Persistent Storage. [ 9.772733] random: crng init done [ 9.776184] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Authorization Manager... Starting User Login Management... [ 11.336396] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.341848] Bluetooth: BNEP filters: protocol multicast [ 11.341885] Bluetooth: BNEP socket layer initialized [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Authorization Manager. [ OK ] Started Bluetooth service. [ OK ] Started WPA supplicant. [ OK ] Started User Login Management. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. [ 17.411360] mcp230xx 1-0027: error -ENXIO: can't write IOCON 39 [ 18.580364] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 131, base_baud = 3000000) is a Allwinner sun4i [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Started Power on GSM modem. [ OK ] Reached target Network (Pre). Starting Network Manager... Starting Raise network interfaces... [ OK ] Finished Raise network interfaces. [ OK ] Started Network Manager. [ OK ] Reached target Network. Starting Network Manager Wait Online... Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started KNX Daemon. [ OK ] Finished KNXD Configurator for Wiren Board. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ 26.944434] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 26.963212] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 26.970598] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 26.970616] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 26.985584] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [ OK ] Reached target Host and Network Name Lookups. Starting Network Manager Script Dispatcher Service... [ OK ] Started Getty on tty1. Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Started MQTT Driver for GPIO-controlled switches. [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Finished Compensation of s…ice-tree (with opposite sign). [ 28.248787] start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384) [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started A high performance…er and a reverse proxy server. Starting USB Debug Network... [ OK ] Stopped MQTT Driver for GPIO-controlled switches. Starting MQTT Driver for GPIO-controlled switches... [ 31.311352] Mass Storage Function, version: 2009/09/11 [ 31.316824] LUN: removable file: (no medium) [ 31.369148] using random self ethernet address [ 31.373730] using random host ethernet address [ 31.541244] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 31.546004] dbg0: MAC 1a:55:89:a2:69:43 [ OK ] Finished USB Debug Network. [ OK ] Started MQTT Driver for GPIO-controlled switches. Debian GNU/Linux 11 wirenboard-A675XKKL ttyS0 wirenboard-A675XKKL login: [ 33.763255] vcc-gmac-phy: disabling [ 33.769254] dc5ldo: disabling [ 33.773810] dldo4: disabling [ 33.781230] vdd-sd-power: disabling [ 33.784973] vcc-sd: disabling [ 41.882925] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 42.174048] usb 3-1: USB disconnect, device number 2 [ 45.211934] process '/usr/sbin/netplugd' started with executable stack [ 48.062999] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 48.337084] usbcore: registered new interface driver option [ 48.343054] usbserial: USB Serial support registered for GSM modem (1-port) [ 48.350836] option 3-1:1.2: GSM modem (1-port) converter detected [ 48.367550] usbcore: registered new interface driver cdc_ether [ 48.393453] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 48.400844] option 3-1:1.4: GSM modem (1-port) converter detected [ 48.421405] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 48.437102] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, ba:9b:e3:d0:4a:d6 [ 48.447787] usbcore: registered new interface driver rndis_host [ 48.462146] option 3-1:1.5: GSM modem (1-port) converter detected [ 48.474973] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 48.482315] option 3-1:1.3: GSM modem (1-port) converter detected [ 48.495342] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 74.849818] PPP BSD Compression module registered [ 74.872016] PPP Deflate Compression module registered [ 97.463418] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 97.471783] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [EC] Watchdog is timed out, reset power. U-Boot SPL 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) DRAM: 1024 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 1 ms (318.4 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502424 bytes read in 139 ms (44.6 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57723 bytes read in 3 ms (18.3 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x633818 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb169 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Aug 7 14:39:59 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x7ec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000020] Switching to timer-based delay loop, resolution 41ns [ 0.000357] Console: colour dummy device 80x30 [ 0.000429] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000458] pid_max: default: 32768 minimum: 301 [ 0.000694] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000720] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001897] CPU: Testing write buffer coherency: ok [ 0.002321] /cpus/cpu@0 missing clock-frequency property [ 0.002362] /cpus/cpu@1 missing clock-frequency property [ 0.002403] /cpus/cpu@2 missing clock-frequency property [ 0.002448] /cpus/cpu@3 missing clock-frequency property [ 0.002465] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003514] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.003712] rcu: Hierarchical SRCU implementation. [ 0.004622] smp: Bringing up secondary CPUs ... [ 0.015718] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.026969] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.038109] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.038289] smp: Brought up 1 node, 4 CPUs [ 0.038326] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.038339] CPU: All CPU(s) started in HYP mode. [ 0.038350] CPU: Virtualization extensions available. [ 0.039338] devtmpfs: initialized [ 0.052556] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.052862] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.052897] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.053867] pinctrl core: initialized pinctrl subsystem [ 0.055417] NET: Registered protocol family 16 [ 0.057976] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.059203] thermal_sys: Registered thermal governor 'step_wise' [ 0.059718] No ATAGs? [ 0.059947] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.059965] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.110212] SCSI subsystem initialized [ 0.110480] usbcore: registered new interface driver usbfs [ 0.110541] usbcore: registered new interface driver hub [ 0.110614] usbcore: registered new device driver usb [ 0.111001] mc: Linux media interface: v0.10 [ 0.111050] videodev: Linux video capture interface: v2.00 [ 0.111122] pps_core: LinuxPPS API ver. 1 registered [ 0.111136] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.111164] PTP clock support registered [ 0.111459] Advanced Linux Sound Architecture Driver Initialized. [ 0.112617] clocksource: Switched to clocksource arch_sys_counter [ 0.751810] NET: Registered protocol family 2 [ 0.752767] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.752826] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.752908] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.753030] TCP: Hash tables configured (established 8192 bind 8192) [ 0.753192] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.753266] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.753521] NET: Registered protocol family 1 [ 0.754284] RPC: Registered named UNIX socket transport module. [ 0.754308] RPC: Registered udp transport module. [ 0.754321] RPC: Registered tcp transport module. [ 0.754333] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.755957] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.757581] Initialise system trusted keyrings [ 0.757862] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.766671] NFS: Registering the id_resolver key type [ 0.766732] Key type id_resolver registered [ 0.766746] Key type id_legacy registered [ 0.862051] Key type asymmetric registered [ 0.862079] Asymmetric key parser 'x509' registered [ 0.862229] bounce: pool size: 64 pages [ 0.862309] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.862326] io scheduler mq-deadline registered [ 0.862339] io scheduler kyber registered [ 0.863589] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.887538] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.901926] brd: module loaded [ 0.912948] loop: module loaded [ 0.918718] libphy: Fixed MDIO Bus: probed [ 0.919891] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 0.920531] libphy: sun4i_mii_bus: probed [ 0.922653] CAN device driver interface [ 0.924777] PPP generic driver version 2.4.2 [ 0.925046] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.925063] ehci-platform: EHCI generic platform driver [ 0.926087] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.926124] ohci-platform: OHCI generic platform driver [ 0.927216] usbcore: registered new interface driver usb-storage [ 0.927336] usbcore: registered new interface driver usbserial_generic [ 0.927376] usbserial: USB Serial support registered for generic [ 0.929405] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 0.929427] sun6i-rtc 1c20400.rtc: RTC enabled [ 0.930088] i2c /dev entries driver [ 0.936658] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.939766] ledtrig-cpu: registered to indicate activity on CPUs [ 0.940408] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 0.940742] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.941368] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.941573] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.941771] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.941932] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 0.942145] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 0.942331] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 0.942510] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 0.942816] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 0.944662] usbcore: registered new interface driver usbhid [ 0.944682] usbhid: USB HID core driver [ 0.950552] Initializing XFRM netlink socket [ 0.951251] NET: Registered protocol family 10 [ 0.952363] Segment Routing with IPv6 [ 0.952505] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.953319] NET: Registered protocol family 17 [ 0.953353] can: controller area network core [ 0.953455] NET: Registered protocol family 29 [ 0.953471] can: raw protocol [ 0.953485] can: broadcast manager protocol [ 0.953505] can: netlink gateway - max_hops=1 [ 0.953659] can: SAE J1939 [ 0.953984] Key type dns_resolver registered [ 0.954077] Registering SWP/SWPB emulation handler [ 0.954196] registered taskstats version 1 [ 0.954257] Loading compiled-in X.509 certificates [ 0.974378] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.978890] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.979685] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 0.983706] printk: console [ttyS0] disabled [ 0.983854] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i [ 1.923737] printk: console [ttyS0] enabled [ 1.928958] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 1.935796] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 1.942410] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 1.949765] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 1.960469] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 1.974624] wbec-rtc wbec-rtc.4.auto: DMA mask not set [ 1.981156] wbec-rtc wbec-rtc.4.auto: registered as rtc0 [ 1.986756] wbec-rtc wbec-rtc.4.auto: setting system clock to 2024-11-13T12:39:36 UTC (1731501576) [ 1.998088] wbec spi0.0: WBEC device added [ 2.002843] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.010869] libphy: sun4i_mii_bus: probed [ 2.015886] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.022715] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.029321] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.038769] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.045588] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.052203] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.059707] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.070237] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.078609] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.085429] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.091870] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.099191] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.109543] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.124235] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.140380] vcc-3v3: supplied by regulator-dummy [ 2.145982] vdd-cpu: supplied by regulator-dummy [ 2.151484] vdd-sys: supplied by regulator-dummy [ 2.157102] dcdc4: supplied by regulator-dummy [ 2.162446] vcc-dram: supplied by regulator-dummy [ 2.167330] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.174337] vcc-gmac-phy: supplied by vcc-3v3 [ 2.179768] dc5ldo: supplied by vcc-dram [ 2.184315] tv: Bringing 700000uV into 3300000-3300000uV [ 2.190276] tv: supplied by regulator-dummy [ 2.195111] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.201430] aldo2: supplied by regulator-dummy [ 2.207243] avcc-pll: supplied by regulator-dummy [ 2.212930] eldo1: supplied by regulator-dummy [ 2.218306] eldo2: supplied by regulator-dummy [ 2.223409] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.230276] vcc-pe: supplied by regulator-dummy [ 2.235440] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.242421] vcc-sd-alt: supplied by regulator-dummy [ 2.248266] dldo2: supplied by regulator-dummy [ 2.253676] dldo3: supplied by regulator-dummy [ 2.259048] dldo4: supplied by regulator-dummy [ 2.264062] rtc_ldo: supplied by regulator-dummy [ 2.269074] random: fast init done [ 2.272972] ldo_io0: supplied by regulator-dummy [ 2.278492] ldo_io1: supplied by regulator-dummy [ 2.283886] axp20x-adc axp22x-adc: DMA mask not set [ 2.290587] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 2.301073] axp20x-i2c 0-0034: AXP20X driver loaded [ 2.340459] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 2.348312] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i [ 2.358788] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.362514] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 2.366776] libphy: sun4i_mii_bus: probed [ 2.500640] mmc0: new DDR MMC card at address 0001 [ 2.506378] mmcblk0: mmc0:0001 88A398 7.28 GiB [ 2.511302] mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB [ 2.516425] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:35:6b [ 2.517704] mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB [ 2.526514] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 2.531638] mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0) [ 2.537771] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 2.551551] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 2.557702] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 2.564970] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 2.572204] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 2.577201] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 2.583998] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 2.589655] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 2.596026] libphy: stmmac: probed [ 2.599985] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.865206] ehci-platform 1c14000.usb: EHCI Host Controller [ 2.870821] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 2.879026] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 2.912610] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 2.919715] hub 1-0:1.0: USB hub found [ 2.923586] hub 1-0:1.0: 1 port detected [ 2.928730] ehci-platform 1c19000.usb: EHCI Host Controller [ 2.934359] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 2.942362] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 2.972610] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 2.979655] hub 2-0:1.0: USB hub found [ 2.983488] hub 2-0:1.0: 1 port detected [ 2.988596] ehci-platform 1c1c000.usb: EHCI Host Controller [ 2.994215] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.002191] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.033115] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.040077] hub 3-0:1.0: USB hub found [ 3.043906] hub 3-0:1.0: 1 port detected [ 3.142705] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.149343] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.157311] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 3.237507] hub 4-0:1.0: USB hub found [ 3.241316] hub 4-0:1.0: 1 port detected [ 3.246427] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 3.253119] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 3.261112] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 3.337508] hub 5-0:1.0: USB hub found [ 3.341313] hub 5-0:1.0: 1 port detected [ 3.346402] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 3.353073] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 3.361028] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 3.367095] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 3.437515] hub 6-0:1.0: USB hub found [ 3.441323] hub 6-0:1.0: 1 port detected [ 3.454300] of_cfs_init [ 3.456876] of_cfs_init: OK [ 3.460374] ALSA device list: [ 3.463392] No soundcards found. [ 3.475901] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 3.492979] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 3.500308] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 3.558944] EXT4-fs (mmcblk0p2): recovery complete [ 3.564331] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.572507] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.580341] devtmpfs: mounted [ 3.588237] Freeing unused kernel memory: 1024K [ 3.593098] Run /sbin/init as init process [ 3.844789] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 3.869022] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 3.905713] systemd[1]: Set hostname to . [ 4.679148] systemd[1]: Queued start job for default target Graphical Interface. [ 4.688700] random: systemd: uninitialized urandom read (16 bytes read) [ 4.699410] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.732896] random: systemd: uninitialized urandom read (16 bytes read) [ 4.741456] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 4.782918] random: systemd: uninitialized urandom read (16 bytes read) [ 4.791687] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.834659] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 4.874431] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.913327] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 4.953119] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 4.993107] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.005172] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.043281] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.072866] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.112818] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.144089] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.183271] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 5.233946] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 5.243233] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.283895] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.316887] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.353618] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.393699] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 5.407857] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.448665] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 5.488907] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 5.529429] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 5.570828] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 5.619825] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 5.659882] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 5.689980] fuse: init (API version 7.32) [ 5.701103] systemd[1]: Starting nftables... Starting nftables... [ 5.735250] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.753144] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 5.804761] systemd[1]: Starting Journal Service... Starting Journal Service... [ 5.823262] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 5.839246] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 5.865266] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 5.873189] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 5.885250] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System 5.895641] systemd[1]: Mounted Kernel Trace File System. m. [ OK ] Mounted Kernel Trace File System 5.908132] systemd[1]: Finished Create list of static device nodes for the current kernel. m. [ OK ] Finished Create list of st… nodes for the current kernel. [ 5.936368] systemd[1]: modprobe@drm.service: Succeeded. [ 5.944213] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm[ 5.951665] systemd[1]: modprobe@fuse.service: Succeeded. . [ 5.964109] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse 5.972532] systemd[1]: Finished Load Kernel Modules. m. [ OK ] Finished Load Kernel Modules. [ 5.989231] systemd[1]: Mounting FUSE Control File System... Mounting FUSE Control File System... [ 6.039417] systemd[1]: Started File System Check Daemon to report status. [ OK ] Started File System Check Daemon to report status. [ 6.089465] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 6.127427] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished File System Check on Root Device. [ OK ] Mounted FUSE Control File System. [ OK ] Finished nftables. [ OK ] Finished Apply Kernel Variables. Starting Remount Root and Kernel File Systems... [ 6.376701] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Finished Remount Root and Kernel File Systems. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Finished Coldplug All udev Devices. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 7.311429] Driver for 1-wire Dallas network protocol. [ 7.563096] usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator [ 7.601976] wbec-adc wbec-adc.1.auto: DMA mask not set [ 7.609570] iio-rescale vin-volt: using raw+scale source channel [ 7.624915] iio-rescale v33-volt: using raw+scale source channel [ 7.633068] iio-rescale v50-volt: using raw+scale source channel [ 7.634090] wbec-power wbec-power.6.auto: DMA mask not set [ 7.640576] wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set [ 7.650934] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0 [ 7.653325] iio-rescale vbus-debug-volt: using raw+scale source channel [ 7.670390] wbec-gpio wbec-gpio.2.auto: DMA mask not set [ 7.670552] iio-rescale vbus-network-volt: using raw+scale source channel [ 7.684027] iio-rescale a1-volt: using raw+scale source channel [ 7.691191] iio-rescale a2-volt: using raw+scale source channel [ 7.698642] iio-rescale a3-volt: using raw+scale source channel [ 7.706017] iio-rescale a4-volt: using raw+scale source channel [ 7.754528] wbec-watchdog wbec-watchdog.3.auto: DMA mask not set [ 7.868767] Bluetooth: Core ver 2.22 [ 7.872576] NET: Registered protocol family 31 [ 7.877200] Bluetooth: HCI device and connection manager initialized [ 7.883655] Bluetooth: HCI socket layer initialized [ 7.888570] Bluetooth: L2CAP socket layer initialized [ 7.893744] Bluetooth: SCO socket layer initialized [ 7.918243] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.920021] usbcore: registered new interface driver btusb [ 7.944696] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723 [ 7.956703] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 7.963087] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin [ 7.972112] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin [ 7.979713] Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507 [ 8.003044] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.015707] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/mmcblk0p6. [ 8.402808] Bluetooth: hci0: RTL: fw version 0xd9b80b4f [ 8.441105] RTW: rtl8733bu v5.13.0.1-112-g10248f4f3.20230626_COEX20230616-330e [ 8.448618] RTW: rtl8733bu BT-Coex version = COEX20230616-330e [ 8.455876] RTW: [HALMAC]135 [ 8.455876] HALMAC_MAJOR_VER = 1 [ 8.455876] HALMAC_PROTOTYPE_VER = 6 [ 8.455876] HALMAC_MINOR_VER = 6 [ 8.455876] HALMAC_PATCH_VER = 39 [ OK ] Found device /dev/ttyS0. [ 8.674807] RTW: hal_com_config_channel_plan chplan:0x7F [ OK ] Reached target Hardware activated USB gadget. [ 8.864679] RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:46:be:ec [ 8.872763] RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:46:be:ec [ 8.880774] usbcore: registered new interface driver rtl8733bu [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... [ 9.053123] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc Starting Load/Save RF Kill Switch Status... [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 9.287933] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 9.474629] systemd-journald[142]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config[ 9.494326] systemd-journald[142]: File /var/log/journal/6eb89b0c4878450b818245bc16d7a857/system.journal corrupted or uncleanly shut down, renaming and replacing. files... [ 9.612702] random: crng init done [ 9.616137] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Authorization Manager... Starting User Login Management... [ 11.326439] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.331790] Bluetooth: BNEP filters: protocol multicast [ 11.337158] Bluetooth: BNEP socket layer initialized [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started Authorization Manager. [ OK ] Started Bluetooth service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started User Login Management. [ OK ] Started WPA supplicant. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. [ 17.492245] mcp230xx 1-0027: error -ENXIO: can't write IOCON 39 [ 18.673074] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 131, base_baud = 3000000) is a Allwinner sun4i [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Started Power on GSM modem. [ OK ] Reached target Network (Pre). Starting Network Manager... Starting Raise network interfaces... [ OK ] Finished Raise network interfaces. [ OK ] Started Network Manager. [ OK ] Reached target Network. Starting Network Manager Wait Online... Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started KNX Daemon. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ OK ] Finished KNXD Configurator for Wiren Board. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ 26.954555] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 26.972790] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 26.995685] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 27.003241] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 27.010948] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 27.040477] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ 27.052472] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Finished Permit User Sessions. [ OK ] Started Network Time Service. [ OK ] Reached target Host and Network Name Lookups. Starting Network Manager Script Dispatcher Service... [ OK ] Started Getty on tty1. Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Started MQTT Driver for GPIO-controlled switches. [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Finished Compensation of s…ice-tree (with opposite sign). [ 28.256880] start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384) [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started A high performance…er and a reverse proxy server. Starting USB Debug Network... [ OK ] Stopped MQTT Driver for GPIO-controlled switches. Starting MQTT Driver for GPIO-controlled switches... [ 31.535567] Mass Storage Function, version: 2009/09/11 [ 31.540773] LUN: removable file: (no medium) [ 31.571231] using random self ethernet address [ 31.575828] using random host ethernet address [ 31.778493] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 31.783230] dbg0: MAC 1a:55:89:a2:69:43 [ OK ] Finished USB Debug Network. [ OK ] Started MQTT Driver for GPIO-controlled switches. Debian GNU/Linux 11 wirenboard-A675XKKL ttyS0 wirenboard-A675XKKL login: [ 33.762852] vcc-gmac-phy: disabling [ 33.766819] dc5ldo: disabling [ 33.780406] dldo4: disabling [ 33.783846] vdd-sd-power: disabling [ 33.787436] vcc-sd: disabling [ 41.392832] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 41.661859] usb 3-1: USB disconnect, device number 2 [ 45.238474] process '/usr/sbin/netplugd' started with executable stack [ 47.553051] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 47.882759] usbcore: registered new interface driver cdc_ether [ 47.921988] usbcore: registered new interface driver option [ 47.933957] usbserial: USB Serial support registered for GSM modem (1-port) [ 47.947961] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 6a:9b:62:3f:ce:4a [ 47.958749] usbcore: registered new interface driver rndis_host [ 47.976215] option 3-1:1.2: GSM modem (1-port) converter detected [ 47.992400] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 47.999986] option 3-1:1.4: GSM modem (1-port) converter detected [ 48.016761] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 48.024404] option 3-1:1.5: GSM modem (1-port) converter detected [ 48.039319] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 48.046965] option 3-1:1.3: GSM modem (1-port) converter detected [ 48.058233] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 73.958208] PPP BSD Compression module registered [ 73.994750] PPP Deflate Compression module registered [ 75.103228] sun4i-emac 1c0b000.ethernet eth0: Link is Down [ 78.003653] dwmac-sun8i 1c50000.ethernet eth1: Link is Up - 100Mbps/Full - flow control rx/tx [ 78.012921] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Error reading from serial device ────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── Session stopped - Press to exit tab - Press R to restart session - Press S to save terminal output to file ────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── Session stopped - Press to exit tab - Press R to restart session - Press S to save terminal output to file ............ 326 bytes read in 1 ms (318.4 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502424 bytes read in 139 ms (44.6 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57723 bytes read in 4 ms (13.8 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x633818 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb169 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Aug 7 14:39:59 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x7ec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1004488K/1048576K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 27704K reserved, 16384K cma-reserved, 245748K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000021] Switching to timer-based delay loop, resolution 41ns [ 0.000357] Console: colour dummy device 80x30 [ 0.000429] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000457] pid_max: default: 32768 minimum: 301 [ 0.000693] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000722] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001888] CPU: Testing write buffer coherency: ok [ 0.002316] /cpus/cpu@0 missing clock-frequency property [ 0.002360] /cpus/cpu@1 missing clock-frequency property [ 0.002401] /cpus/cpu@2 missing clock-frequency property [ 0.002446] /cpus/cpu@3 missing clock-frequency property [ 0.002462] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003525] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.003728] rcu: Hierarchical SRCU implementation. [ 0.004639] smp: Bringing up secondary CPUs ... [ 0.015742] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.026995] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.038128] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.038310] smp: Brought up 1 node, 4 CPUs [ 0.038346] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.038359] CPU: All CPU(s) started in HYP mode. [ 0.038370] CPU: Virtualization extensions available. [ 0.039361] devtmpfs: initialized [ 0.052609] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.052911] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.052947] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.053921] pinctrl core: initialized pinctrl subsystem [ 0.055457] NET: Registered protocol family 16 [ 0.058008] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.059238] thermal_sys: Registered thermal governor 'step_wise' [ 0.059755] No ATAGs? [ 0.059980] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.059996] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.110205] SCSI subsystem initialized [ 0.110471] usbcore: registered new interface driver usbfs [ 0.110532] usbcore: registered new interface driver hub [ 0.110603] usbcore: registered new device driver usb [ 0.110995] mc: Linux media interface: v0.10 [ 0.111043] videodev: Linux video capture interface: v2.00 [ 0.111116] pps_core: LinuxPPS API ver. 1 registered [ 0.111130] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.111158] PTP clock support registered [ 0.111453] Advanced Linux Sound Architecture Driver Initialized. [ 0.112638] clocksource: Switched to clocksource arch_sys_counter [ 0.751865] NET: Registered protocol family 2 [ 0.752839] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.752896] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.752976] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.753098] TCP: Hash tables configured (established 8192 bind 8192) [ 0.753260] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.753333] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.753582] NET: Registered protocol family 1 [ 0.754346] RPC: Registered named UNIX socket transport module. [ 0.754371] RPC: Registered udp transport module. [ 0.754384] RPC: Registered tcp transport module. [ 0.754396] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.756043] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.757664] Initialise system trusted keyrings [ 0.757944] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.766863] NFS: Registering the id_resolver key type [ 0.766923] Key type id_resolver registered [ 0.766936] Key type id_legacy registered [ 0.864574] Key type asymmetric registered [ 0.864600] Asymmetric key parser 'x509' registered [ 0.864750] bounce: pool size: 64 pages [ 0.864831] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.864848] io scheduler mq-deadline registered [ 0.864861] io scheduler kyber registered [ 0.866041] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.889824] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.904270] brd: module loaded [ 0.915371] loop: module loaded [ 0.921121] libphy: Fixed MDIO Bus: probed [ 0.922291] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 0.923039] libphy: sun4i_mii_bus: probed [ 0.925102] CAN device driver interface [ 0.927209] PPP generic driver version 2.4.2 [ 0.927468] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.927485] ehci-platform: EHCI generic platform driver [ 0.928498] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.928532] ohci-platform: OHCI generic platform driver [ 0.929606] usbcore: registered new interface driver usb-storage [ 0.929721] usbcore: registered new interface driver usbserial_generic [ 0.929762] usbserial: USB Serial support registered for generic [ 0.931797] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 0.931818] sun6i-rtc 1c20400.rtc: RTC enabled [ 0.932465] i2c /dev entries driver [ 0.938899] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.941986] ledtrig-cpu: registered to indicate activity on CPUs [ 0.942691] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 0.943034] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.943675] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.943883] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.944080] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.944241] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 0.944447] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 0.944630] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 0.944819] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 0.945028] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 0.946847] usbcore: registered new interface driver usbhid [ 0.946865] usbhid: USB HID core driver [ 0.952792] Initializing XFRM netlink socket [ 0.953506] NET: Registered protocol family 10 [ 0.954608] Segment Routing with IPv6 [ 0.954748] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.955487] NET: Registered protocol family 17 [ 0.955516] can: controller area network core [ 0.955617] NET: Registered protocol family 29 [ 0.955632] can: raw protocol [ 0.955646] can: broadcast manager protocol [ 0.955667] can: netlink gateway - max_hops=1 [ 0.955824] can: SAE J1939 [ 0.956136] Key type dns_resolver registered [ 0.956227] Registering SWP/SWPB emulation handler [ 0.956341] registered taskstats version 1 [ 0.956403] Loading compiled-in X.509 certificates [ 0.976504] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.980911] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.981699] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 0.985633] printk: console [ttyS0] disabled [ 0.985786] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 3000000) is a Allwinner sun4i [ 1.925936] printk: console [ttyS0] enabled [ 1.931179] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 1.938031] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 1.944676] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 1.951986] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 1.962689] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 1.976781] wbec-rtc wbec-rtc.4.auto: DMA mask not set [ 1.983348] wbec-rtc wbec-rtc.4.auto: registered as rtc0 [ 1.988896] wbec-rtc wbec-rtc.4.auto: setting system clock to 2024-11-13T12:46:11 UTC (1731501971) [ 2.000226] wbec spi0.0: WBEC device added [ 2.004992] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.013055] libphy: sun4i_mii_bus: probed [ 2.017959] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.024813] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.031430] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.040856] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.047680] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.054317] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.061799] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.072327] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.080709] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.087532] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.093991] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.101299] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.111666] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.126355] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.142503] vcc-3v3: supplied by regulator-dummy [ 2.148148] vdd-cpu: supplied by regulator-dummy [ 2.153688] vdd-sys: supplied by regulator-dummy [ 2.159203] dcdc4: supplied by regulator-dummy [ 2.164646] vcc-dram: supplied by regulator-dummy [ 2.169495] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.176513] vcc-gmac-phy: supplied by vcc-3v3 [ 2.181966] dc5ldo: supplied by vcc-dram [ 2.186502] tv: Bringing 700000uV into 3300000-3300000uV [ 2.192461] tv: supplied by regulator-dummy [ 2.197286] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.203632] aldo2: supplied by regulator-dummy [ 2.209398] avcc-pll: supplied by regulator-dummy [ 2.215080] eldo1: supplied by regulator-dummy [ 2.220452] eldo2: supplied by regulator-dummy [ 2.225569] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.232441] vcc-pe: supplied by regulator-dummy [ 2.237596] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.244601] vcc-sd-alt: supplied by regulator-dummy [ 2.250409] dldo2: supplied by regulator-dummy [ 2.255826] dldo3: supplied by regulator-dummy [ 2.261202] dldo4: supplied by regulator-dummy [ 2.266210] rtc_ldo: supplied by regulator-dummy [ 2.271228] random: fast init done [ 2.275126] ldo_io0: supplied by regulator-dummy [ 2.280643] ldo_io1: supplied by regulator-dummy [ 2.286042] axp20x-adc axp22x-adc: DMA mask not set [ 2.292780] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 2.303223] axp20x-i2c 0-0034: AXP20X driver loaded [ 2.366612] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 2.374485] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 3000000) is a Allwinner sun4i [ 2.384928] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.388621] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 2.392942] libphy: sun4i_mii_bus: probed [ 2.527399] mmc0: new DDR MMC card at address 0001 [ 2.533129] mmcblk0: mmc0:0001 88A398 7.28 GiB [ 2.538059] mmcblk0boot0: mmc0:0001 88A398 partition 1 4.00 MiB [ 2.544478] mmcblk0boot1: mmc0:0001 88A398 partition 2 4.00 MiB [ 2.546532] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:35:6b [ 2.550693] mmcblk0rpmb: mmc0:0001 88A398 partition 3 4.00 MiB, chardev (246:0) [ 2.559633] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 2.572356] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 2.578856] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 2.584979] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 2.592223] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 2.599493] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 2.604484] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 2.611269] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 2.616943] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 2.623320] libphy: stmmac: probed [ 2.627283] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.885218] ehci-platform 1c14000.usb: EHCI Host Controller [ 2.890836] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 2.899046] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 2.932640] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 2.939736] hub 1-0:1.0: USB hub found [ 2.943599] hub 1-0:1.0: 1 port detected [ 2.948746] ehci-platform 1c19000.usb: EHCI Host Controller [ 2.954379] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 2.962382] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 2.992642] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 2.999688] hub 2-0:1.0: USB hub found [ 3.003522] hub 2-0:1.0: 1 port detected [ 3.008614] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.014237] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.022216] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.053136] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.060096] hub 3-0:1.0: USB hub found [ 3.063925] hub 3-0:1.0: 1 port detected [ 3.162730] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.169367] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.177343] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 3.257549] hub 4-0:1.0: USB hub found [ 3.261358] hub 4-0:1.0: 1 port detected [ 3.266487] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 3.273150] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 3.281076] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 3.357503] hub 5-0:1.0: USB hub found [ 3.361311] hub 5-0:1.0: 1 port detected [ 3.366403] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 3.373077] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 3.380871] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 3.388151] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 3.467517] hub 6-0:1.0: USB hub found [ 3.471326] hub 6-0:1.0: 1 port detected [ 3.484435] of_cfs_init [ 3.487004] of_cfs_init: OK [ 3.490513] ALSA device list: [ 3.493539] No soundcards found. [ 3.506196] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 3.523269] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 3.530598] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 3.543091] EXT4-fs (mmcblk0p2): recovery complete [ 3.548471] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.556694] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.566585] devtmpfs: mounted [ 3.574366] Freeing unused kernel memory: 1024K [ 3.603017] Run /sbin/init as init process [ 3.855082] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 3.879335] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 3.923612] systemd[1]: Set hostname to . [ 4.708133] systemd[1]: Queued start job for default target Graphical Interface. [ 4.717511] random: systemd: uninitialized urandom read (16 bytes read) [ 4.728299] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.772958] random: systemd: uninitialized urandom read (16 bytes read) [ 4.781531] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 4.822851] random: systemd: uninitialized urandom read (16 bytes read) [ 4.831576] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.874636] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 4.914368] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.953323] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 4.993139] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.033139] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.045306] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.083332] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.112903] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.152843] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.184110] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.223289] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 5.273932] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 5.283235] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.323892] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.356895] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.393649] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.433867] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 5.447867] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.489081] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 5.528902] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 5.569373] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 5.610933] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 5.660109] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 5.699745] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 5.722975] fuse: init (API version 7.32) [ 5.739662] systemd[1]: Starting nftables... Starting nftables... [ 5.775355] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.792004] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 5.845910] systemd[1]: Starting Journal Service... Starting Journal Service... [ 5.862460] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 5.877997] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 5.901427] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 5.909224] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 5.920072] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System 5.932043] systemd[1]: Mounted Kernel Trace File System. m. [ OK ] Mounted Kernel Trace File System 5.944715] systemd[1]: Finished Create list of static device nodes for the current kernel. m. [ OK ] Finished Create list of st… nodes for the current kernel. [ 5.969703] systemd[1]: modprobe@drm.service: Succeeded. [ 5.977178] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.015710] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.023048] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 6.065431] systemd[1]: Finished File System Check on Root Device. [ OK ] Finished File System Check on Root Device. [ 6.115569] systemd[1]: Finished Load Kernel Modules. [ OK ] Finished Load Kernel Modules. [ 6.143932] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ OK ] Finished nftables. [ 6.353054] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 7.346933] Driver for 1-wire Dallas network protocol. [ 7.571474] usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator [ 7.588413] wbec-adc wbec-adc.1.auto: DMA mask not set [ 7.588765] wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set [ 7.596135] iio-rescale vin-volt: using raw+scale source channel [ 7.607522] iio-rescale v33-volt: using raw+scale source channel [ 7.618531] wbec-power wbec-power.6.auto: DMA mask not set [ 7.620726] iio-rescale v50-volt: using raw+scale source channel [ 7.632331] iio-rescale vbus-debug-volt: using raw+scale source channel [ 7.632338] wbec-watchdog wbec-watchdog.3.auto: DMA mask not set [ 7.632487] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0 [ 7.649705] iio-rescale vbus-network-volt: using raw+scale source channel [ 7.667891] iio-rescale a1-volt: using raw+scale source channel [ 7.675920] wbec-gpio wbec-gpio.2.auto: DMA mask not set [ 7.690977] iio-rescale a2-volt: using raw+scale source channel [ 7.713543] iio-rescale a3-volt: using raw+scale source channel [ 7.720756] iio-rescale a4-volt: using raw+scale source channel [ 7.765515] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.839770] Bluetooth: Core ver 2.22 [ 7.843596] NET: Registered protocol family 31 [ 7.848058] Bluetooth: HCI device and connection manager initialized [ 7.854489] Bluetooth: HCI socket layer initialized [ 7.859386] Bluetooth: L2CAP socket layer initialized [ 7.864537] Bluetooth: SCO socket layer initialized [ 7.897107] usbcore: registered new interface driver btusb [ 7.904639] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.911705] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723 [ 7.921745] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 7.927938] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin [ 7.941255] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin [ 7.943828] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 7.948798] Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507 [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/mmcblk0p6. [ OK ] Found device /dev/ttyS0.[ 8.193011] RTW: rtl8733bu v5.13.0.1-112-g10248f4f3.20230626_COEX20230616-330e [ 8.203744] RTW: rtl8733bu BT-Coex version = COEX20230616-330e [ 8.232819] RTW: [HALMAC]135 [ 8.232819] HALMAC_MAJOR_VER = 1 [ 8.232819] HALMAC_PROTOTYPE_VER = 6 [ 8.232819] HALMAC_MINOR_VER = 6 [ 8.232819] HALMAC_PATCH_VER = 39 Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... [ 8.412905] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ 8.428759] Bluetooth: hci0: RTL: fw version 0xd9b80b4f [ 8.445068] RTW: hal_com_config_channel_plan chplan:0x7F [ OK ] Activated swap /dev/mmcblk0p5. [ 8.652942] RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:46:be:ec [ 8.665407] RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:46:be:ec [ 8.685865] usbcore: registered new interface driver rtl8733bu [ OK ] Finished File System Check on /dev/mmcblk0p6. [ OK ] Reached target Swap. [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Mounting /mnt/data... Starting Load/Save RF Kill Switch Status..[ 9.179602] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard . [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 9.414483] systemd-journald[142]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config files... [ 9.432066] systemd-journald[142]: File /var/log/journal/6eb89b0c4878450b818245bc16d7a857/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Flush Journal to Persistent Storage. [ 9.762751] random: crng init done [ 9.766200] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Authorization Manager... Starting User Login Management... [ 11.317989] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.323500] Bluetooth: BNEP filters: protocol multicast [ 11.328784] Bluetooth: BNEP socket layer initialized [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started Bluetooth service. [ OK ] Started Authorization Manager. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started WPA supplicant. [ OK ] Started User Login Management. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. [ 17.399640] mcp230xx 1-0027: error -ENXIO: can't write IOCON 39 [ 18.470611] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 131, base_baud = 3000000) is a Allwinner sun4i [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Started Power on GSM modem. [ OK ] Reached target Network (Pre). Starting Network Manager... Starting Raise network interfaces... [ OK ] Finished Raise network interfaces. [ OK ] Started Network Manager. [ OK ] Reached target Network. Starting Network Manager Wait Online... Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started KNX Daemon. [ 26.794154] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ INFO ] Skipped dnsmasq - A lightw…t DH[ 26.820745] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found CP and caching DNS server. [ 26.830305] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 26.840654] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ OK ] Finished KNXD Configurator for Wiren Board. [ INFO ] Skipped Access point and a…serv[ 26.890898] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode er for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [ OK ] Reached target Host and Network Name Lookups. Starting Network Manager Script Dispatcher Service... [ OK ] Started Getty on tty1. Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Started MQTT Driver for GPIO-controlled switches. [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Finished Compensation of s…ice-tree (with opposite sign). [ 28.183768] start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384) [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started A high performance…er and a reverse proxy server. Starting USB Debug Network... [ OK ] Stopped MQTT Driver for GPIO-controlled switches. Starting MQTT Driver for GPIO-controlled switches... [ 31.016638] Mass Storage Function, version: 2009/09/11 [ 31.021841] LUN: removable file: (no medium) [ 31.053359] using random self ethernet address [ 31.057876] using random host ethernet address [ 31.268026] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 31.272585] dbg0: MAC 1a:55:89:a2:69:43 [ OK ] Finished USB Debug Network. [ OK ] Started MQTT Driver for GPIO-controlled switches. Debian GNU/Linux 11 wirenboard-A675XKKL ttyS0 wirenboard-A675XKKL login: [ 33.762835] vcc-gmac-phy: disabling [ 33.766922] dc5ldo: disabling [ 33.772314] dldo4: disabling root Password: [ 41.702934] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 41.989747] usb 3-1: USB disconnect, device number 2 [ 47.873114] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 48.175011] usbcore: registered new interface driver cdc_ether [ 48.193660] usbcore: registered new interface driver option [ 48.199447] usbserial: USB Serial support registered for GSM modem (1-port) [ 48.207400] option 3-1:1.2: GSM modem (1-port) converter detected [ 48.245747] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 48.256750] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 12:97:1c:79:af:1f [ 48.267596] usbcore: registered new interface driver rndis_host [ 48.267724] option 3-1:1.4: GSM modem (1-port) converter detected [ 48.283072] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 48.290503] option 3-1:1.5: GSM modem (1-port) converter detected [ 48.319205] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 48.326784] option 3-1:1.3: GSM modem (1-port) converter detected [ 48.352503] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 _ _ _ __ _(_)_ __ ___ _ __ | |__ ___ __ _ _ __ __| | \ \ /\ / / | '__/ _ \ '_ \| '_ \ / _ \ / _` | '__/ _` | \ V V /| | | | __/ | | | |_) | (_) | (_| | | | (_| | \_/\_/ |_|_| \___|_| |_|_.__/ \___/ \__,_|_| \__,_| Welcome to Wiren Board 7.4.3 (s/n A675XKKL), release wb-2407 (as stable) Linux wirenboard-A675XKKL 5.10.35-wb169 #1 SMP Wed Aug 7 14:39:59 UTC 2024 armv7l GNU/Linux System load: 3.51 0.87 0.29 Up time: 0 min Memory usage: 14% of 997M Usage of /: 37% of 2.0G /mnt/data: 24% of 4.9G Last login: Tue Nov 12 13:33:50 MSK 2024 from 127.0.0.1 on pts/3 root@wirenboard-A675XKKL:~# [ 63.651069] process '/usr/sbin/netplugd' started with executable stack [ 73.526672] PPP BSD Compression module registered [ 73.546791] PPP Deflate Compression module registered [EC] Watchdog is timed out, reset power. U-Boot SPL 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) DRAM: 1024 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.1-gaf2600c5e5 (Oct 23 2023 - 08:43:42 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 1 ms (318.4 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502424 bytes read in 139 ms (44.6 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57723 bytes read in 3 ms (18.3 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x633818 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [