login as: root root@192.168.1.77's password: _ _ _ __ _(_)_ __ ___ _ __ | |__ ___ __ _ _ __ __| | \ \ /\ / / | '__/ _ \ '_ \| '_ \ / _ \ / _` | '__/ _` | \ V V /| | | | __/ | | | |_) | (_) | (_| | | | (_| | \_/\_/ |_|_| \___|_| |_|_.__/ \___/ \__,_|_| \__,_| Welcome to Wiren Board 7.3.3 (s/n ADFA3S44), release wb-2207 (as stable) Linux wirenboard-ADFA3S44 5.10.35-wb120+wb101 #2 SMP Tue Nov 22 12:49:35 UTC 2022 armv7l GNU/Linux Last login: Tue Mar 28 12:34:20 2023 root@wirenboard-ADFA3S44:~# ifconfig eth0: flags=4163 mtu 1500 inet 192.168.1.77 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::285:1ff:fe01:b5f prefixlen 64 scopeid 0x20 ether 00:85:01:01:0b:5f txqueuelen 1000 (Ethernet) RX packets 917 bytes 175221 (171.1 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 190 bytes 24340 (23.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 65 base 0x3000 eth1: flags=4099 mtu 1500 ether 00:85:01:01:15:4e txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 64 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 7375 bytes 538601 (525.9 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 7375 bytes 538601 (525.9 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlan0: flags=4163 mtu 1500 inet 192.168.42.1 netmask 255.255.255.0 broadcast 192.168.42.255 inet6 fe80::c63c:b0ff:fe5d:fe7b prefixlen 64 scopeid 0x20 ether c4:3c:b0:5d:fe:7b txqueuelen 1000 (Ethernet) RX packets 5854 bytes 8338 (8.1 KiB) RX errors 0 dropped 252 overruns 0 frame 0 TX packets 21 bytes 3691 (3.6 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@wirenboard-ADFA3S44:~# lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0bda:b720 Realtek Semiconductor Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@wirenboard-ADFA3S44:~# grep sda ^C root@wirenboard-ADFA3S44:~# dmseg -bash: dmseg: command not found root@wirenboard-ADFA3S44:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb120+wb101 (jenkins@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #2 SMP Tue Nov 22 12:49:35 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.3.3 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x7ec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 19 pages/cpu s47884 r8192 d21748 u77824 [ 0.000000] pcpu-alloc: s47884 r8192 d21748 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1006628K/1048576K available (9216K kernel code, 1430K rwdata, 3068K rodata, 1024K init, 293K bss, 25564K reserved, 16384K cma-reserved, 245748K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 29913 entries in 59 pages [ 0.000000] ftrace: allocated 59 pages with 5 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x840 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000022] Switching to timer-based delay loop, resolution 41ns [ 0.000524] Console: colour dummy device 80x30 [ 0.000928] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.001060] pid_max: default: 32768 minimum: 301 [ 0.001714] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001783] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003541] CPU: Testing write buffer coherency: ok [ 0.004065] /cpus/cpu@0 missing clock-frequency property [ 0.004125] /cpus/cpu@1 missing clock-frequency property [ 0.004182] /cpus/cpu@2 missing clock-frequency property [ 0.004243] /cpus/cpu@3 missing clock-frequency property [ 0.004265] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005355] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.005570] rcu: Hierarchical SRCU implementation. [ 0.007796] smp: Bringing up secondary CPUs ... [ 0.019448] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031110] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.042487] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.042708] smp: Brought up 1 node, 4 CPUs [ 0.042753] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.042768] CPU: All CPU(s) started in HYP mode. [ 0.042783] CPU: Virtualization extensions available. [ 0.043829] devtmpfs: initialized [ 0.067010] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.067720] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.067787] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.069256] pinctrl core: initialized pinctrl subsystem [ 0.070997] NET: Registered protocol family 16 [ 0.075836] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.078368] thermal_sys: Registered thermal governor 'step_wise' [ 0.079277] No ATAGs? [ 0.079625] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.079652] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.162590] SCSI subsystem initialized [ 0.162920] usbcore: registered new interface driver usbfs [ 0.163068] usbcore: registered new interface driver hub [ 0.163154] usbcore: registered new device driver usb [ 0.163574] mc: Linux media interface: v0.10 [ 0.163631] videodev: Linux video capture interface: v2.00 [ 0.163699] pps_core: LinuxPPS API ver. 1 registered [ 0.163715] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.163760] PTP clock support registered [ 0.164091] Advanced Linux Sound Architecture Driver Initialized. [ 0.166764] clocksource: Switched to clocksource arch_sys_counter [ 1.353726] NET: Registered protocol family 2 [ 1.354575] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.354634] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.354720] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.355540] TCP: Hash tables configured (established 8192 bind 8192) [ 1.356002] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.356144] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.356704] NET: Registered protocol family 1 [ 1.358367] RPC: Registered named UNIX socket transport module. [ 1.358400] RPC: Registered udp transport module. [ 1.358418] RPC: Registered tcp transport module. [ 1.358434] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.361022] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.363992] Initialise system trusted keyrings [ 1.364334] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.379993] NFS: Registering the id_resolver key type [ 1.380092] Key type id_resolver registered [ 1.380112] Key type id_legacy registered [ 1.380870] Key type asymmetric registered [ 1.380895] Asymmetric key parser 'x509' registered [ 1.381063] bounce: pool size: 64 pages [ 1.381137] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.381157] io scheduler mq-deadline registered [ 1.381173] io scheduler kyber registered [ 1.383353] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.534845] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.560601] brd: module loaded [ 1.578422] loop: module loaded [ 1.588457] libphy: Fixed MDIO Bus: probed [ 1.590598] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.592127] libphy: sun4i_mii_bus: probed [ 1.594633] CAN device driver interface [ 1.598882] PPP generic driver version 2.4.2 [ 1.599201] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.599221] ehci-platform: EHCI generic platform driver [ 1.600362] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.600399] ohci-platform: OHCI generic platform driver [ 1.603289] usbcore: registered new interface driver usb-storage [ 1.603498] usbcore: registered new interface driver usbserial_generic [ 1.603560] usbserial: USB Serial support registered for generic [ 1.607204] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 1.607264] sun6i-rtc 1c20400.rtc: RTC enabled [ 1.608159] i2c /dev entries driver [ 1.619266] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.624543] ledtrig-cpu: registered to indicate activity on CPUs [ 1.625579] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.626030] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.626635] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.626957] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.627190] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.627370] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 1.627591] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 1.627792] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 1.628857] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 1.629434] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 1.632155] usbcore: registered new interface driver usbhid [ 1.632176] usbhid: USB HID core driver [ 1.636889] iio-rescale a1-volt: using raw+scale source channel [ 1.637476] iio-rescale a2-volt: using raw+scale source channel [ 1.637901] iio-rescale a3-volt: using raw+scale source channel [ 1.638268] iio-rescale vin-volt: using raw+scale source channel [ 1.643987] NET: Registered protocol family 10 [ 1.646707] Segment Routing with IPv6 [ 1.646935] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.647980] NET: Registered protocol family 17 [ 1.648018] can: controller area network core [ 1.648148] NET: Registered protocol family 29 [ 1.648167] can: raw protocol [ 1.648186] can: broadcast manager protocol [ 1.648211] can: netlink gateway - max_hops=1 [ 1.648503] Key type dns_resolver registered [ 1.648604] Registering SWP/SWPB emulation handler [ 1.648727] registered taskstats version 1 [ 1.648793] Loading compiled-in X.509 certificates [ 1.683895] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.691750] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.692691] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.701608] printk: console [ttyS0] disabled [ 1.701841] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 52, base_baud = 1500000) is a Allwinner sun4i [ 2.658176] printk: console [ttyS0] enabled [ 2.663796] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.670634] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.677387] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.684726] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.695450] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.704638] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.713047] libphy: sun4i_mii_bus: probed [ 2.718445] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.725248] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.732000] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.741915] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.748879] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.755515] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.763042] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.773576] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.782849] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.789668] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.796112] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.803475] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.813901] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.833391] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.849393] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0034/axp221-pek/input/input0 [ 2.871776] vcc-3v3: supplied by regulator-dummy [ 2.877488] vdd-cpu: supplied by regulator-dummy [ 2.883137] vdd-sys: supplied by regulator-dummy [ 2.888788] dcdc4: supplied by regulator-dummy [ 2.894229] vcc-dram: supplied by regulator-dummy [ 2.899164] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.906811] vcc-gmac-phy: supplied by vcc-3v3 [ 2.913836] dc5ldo: supplied by vcc-dram [ 2.918319] random: fast init done [ 2.922067] tv: Bringing 700000uV into 3300000-3300000uV [ 2.929255] tv: supplied by regulator-dummy [ 2.934784] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.941461] aldo2: supplied by regulator-dummy [ 2.947660] avcc-pll: supplied by regulator-dummy [ 2.953557] eldo1: supplied by regulator-dummy [ 2.959185] eldo2: supplied by regulator-dummy [ 2.964337] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.971251] vcc-pe: supplied by regulator-dummy [ 2.976435] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.984447] vcc-sd-alt: supplied by regulator-dummy [ 2.990827] dldo2: supplied by regulator-dummy [ 2.996624] dldo3: supplied by regulator-dummy [ 3.002364] dldo4: supplied by regulator-dummy [ 3.007659] rtc_ldo: supplied by regulator-dummy [ 3.013403] ldo_io0: supplied by regulator-dummy [ 3.019117] ldo_io1: supplied by regulator-dummy [ 3.024738] axp20x-adc axp22x-adc: DMA mask not set [ 3.032513] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 3.043487] axp20x-i2c 0-0034: AXP20X driver loaded [ 3.076945] rtc-pcf85063 2-0051: registered as rtc0 [ 3.091247] rtc-pcf85063 2-0051: setting system clock to 2023-03-28T13:18:00 UTC (1680009480) [ 3.100573] lm75 2-0048: supply vs not found, using dummy regulator [ 3.111415] lm75 2-0048: hwmon1: sensor 'lm75b' [ 3.152061] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 3.160584] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 3.171009] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 3.179032] libphy: sun4i_mii_bus: probed [ 3.185801] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 3.305424] mmc0: new DDR MMC card at address 0001 [ 3.311106] mmcblk0: mmc0:0001 008GB0 7.28 GiB [ 3.316015] mmcblk0boot0: mmc0:0001 008GB0 partition 1 8.00 MiB [ 3.320461] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 65 MAC: 00:85:01:01:0b:5f [ 3.322381] mmcblk0boot1: mmc0:0001 008GB0 partition 2 8.00 MiB [ 3.331212] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 3.336311] mmcblk0rpmb: mmc0:0001 008GB0 partition 3 4.00 MiB, chardev (246:0) [ 3.342459] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 3.356146] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 3.362419] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 3.369690] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 3.376943] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 3.381907] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 3.388706] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 3.394362] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 3.400742] libphy: stmmac: probed [ 3.405400] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 3.659363] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.664981] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.673165] ehci-platform 1c14000.usb: irq 37, io mem 0x01c14000 [ 3.706747] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.713860] hub 1-0:1.0: USB hub found [ 3.717714] hub 1-0:1.0: 1 port detected [ 3.722882] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.728514] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.736520] ehci-platform 1c19000.usb: irq 39, io mem 0x01c19000 [ 3.766742] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.773745] hub 2-0:1.0: USB hub found [ 3.777575] hub 2-0:1.0: 1 port detected [ 3.782682] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.788303] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.796261] ehci-platform 1c1c000.usb: irq 41, io mem 0x01c1c000 [ 3.827255] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.834228] hub 3-0:1.0: USB hub found [ 3.838066] hub 3-0:1.0: 1 port detected [ 3.936836] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.943477] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.951452] ohci-platform 1c14400.usb: irq 38, io mem 0x01c14400 [ 4.031630] hub 4-0:1.0: USB hub found [ 4.035440] hub 4-0:1.0: 1 port detected [ 4.040529] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 4.047185] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 4.055099] ohci-platform 1c19400.usb: irq 40, io mem 0x01c19400 [ 4.131661] hub 5-0:1.0: USB hub found [ 4.135465] hub 5-0:1.0: 1 port detected [ 4.140589] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.147265] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 4.155057] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.162345] ohci-platform 1c1c400.usb: irq 42, io mem 0x01c1c400 [ 4.241649] hub 6-0:1.0: USB hub found [ 4.245458] hub 6-0:1.0: 1 port detected [ 4.251541] of_cfs_init [ 4.252832] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 4.254137] of_cfs_init: OK [ 4.265915] ALSA device list: [ 4.268938] No soundcards found. [ 4.283940] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 4.299407] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 4.306765] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.332019] EXT4-fs (mmcblk0p2): recovery complete [ 4.338719] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.346943] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.355051] devtmpfs: mounted [ 4.362872] Freeing unused kernel memory: 1024K [ 4.386981] Run /sbin/init as init process [ 4.391088] with arguments: [ 4.391097] /sbin/init [ 4.391103] with environment: [ 4.391109] HOME=/ [ 4.391115] TERM=linux [ 4.558867] random: systemd: uninitialized urandom read (16 bytes read) [ 4.570873] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.589506] systemd[1]: Detected architecture arm. [ 4.632933] systemd[1]: Set hostname to . [ 4.659948] random: systemd: uninitialized urandom read (16 bytes read) [ 4.695656] random: systemd-cryptse: uninitialized urandom read (16 bytes read) [ 4.882042] systemd[1]: [/lib/systemd/system/wb-mqtt-w1.service:10] Unknown lvalue 'StartLimitIntervalSec' in section 'Service' [ 4.940305] systemd[1]: Listening on udev Kernel Socket. [ 4.977305] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.017254] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.057733] systemd[1]: Created slice System Slice. [ 5.100017] systemd[1]: Mounting /sys/kernel/config... [ 5.140581] systemd[1]: Mounting POSIX Message Queue File System... [ 6.071384] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 6.871333] Driver for 1-wire Dallas network protocol. [ 7.037407] usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, using dummy regulator [ 7.176266] Bluetooth: Core ver 2.22 [ 7.180102] NET: Registered protocol family 31 [ 7.180114] Bluetooth: HCI device and connection manager initialized [ 7.180143] Bluetooth: HCI socket layer initialized [ 7.180157] Bluetooth: L2CAP socket layer initialized [ 7.180185] Bluetooth: SCO socket layer initialized [ 7.208554] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.221998] usbcore: registered new interface driver btusb [ 7.232870] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 7.244917] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 7.251183] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 7.270846] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 7.277406] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 7.286657] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 7.301850] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.308843] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 7.317621] cfg80211: failed to load regulatory.db [ 7.714584] RTL871X: module init start [ 7.718484] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 [ 7.725495] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ 7.746954] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SS [ 7.923727] RTL871X: rtw_ndev_init(wlan0) [ 7.929310] RTL871X: rtw_ndev_init(wlan1) [ 7.934699] usbcore: registered new interface driver rtl8723bu [ 7.940628] RTL871X: module init ret=0 [ 8.042138] usbcore: registered new interface driver rtl8xxxu [ 8.104867] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ 8.748098] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ 9.146063] systemd-journald[116]: Received request to flush runtime journal from PID 1 [ 9.169766] systemd-journald[116]: File /var/log/journal/c084018070af24d075c42c6463613f91/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 10.025981] RTL871X: RTW_ADAPTIVITY_EN_ [ 10.026008] AUTO, chplan:0x20, Regulation:3,3 [ 10.034440] RTL871X: RTW_ADAPTIVITY_MODE_ [ 10.034450] NORMAL [ 11.008301] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.013667] Bluetooth: BNEP filters: protocol multicast [ 11.019092] Bluetooth: BNEP socket layer initialized [ 11.350939] new mount options do not match the existing superblock, will be ignored [ 12.648983] RTL871X: nolinked power save enter [ 13.688604] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 13.703156] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 13.710564] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 13.718396] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 13.726182] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ 16.255839] random: crng init done [ 16.259270] random: 7 urandom warning(s) missed due to ratelimiting [ 17.166872] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 17.175204] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 17.461477] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 130, base_baud = 1500000) is a Allwinner sun4i [ 20.033818] process '/sbin/netplugd' started with executable stack [ 21.363243] RTL871X: RTW_ADAPTIVITY_EN_ [ 21.363271] AUTO, chplan:0x20, Regulation:3,3 [ 21.371673] RTL871X: RTW_ADAPTIVITY_MODE_ [ 21.371685] NORMAL [ 22.203727] RTL871X: nolinked power save leave [ 22.703464] RTL871X: assoc success [ 22.707276] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 34.406840] vcc-gmac-phy: disabling [ 34.410691] dc5ldo: disabling [ 34.414004] dldo4: disabling [ 34.417831] vdd-sd-power: disabling [ 34.421333] vcc-sd: disabling [ 58.686910] RTL871X: ap recv disassoc reason code(3) sta:52:67:67:b3:19:de