All services (2023-09-28T12:39:43.178Z - 2023-09-28T12:31:19.664Z)

2023-09-28T12:39:43.178Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:39:40.668Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:39:40.621Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:39:38.394Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:39:38.393Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:39:36.091Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:39:36.064Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:39:33.672Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:39:33.586Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:39:31.011Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:39:30.931Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:39:27.935Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:39:28.647Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:39:23.780Z [ntp] unable to create socket on wlan0 (8) for fe80::7e25:daff:fe1f:5d04%5#123

2023-09-28T12:39:23.751Z [ntp] bind(26) AF_INET6 fe80::7e25:daff:fe1f:5d04%5#123 flags 0x11 failed: Cannot assign requested address
2023-09-28T12:39:22.637Z [] RTL871X: assoc success
2023-09-28T12:39:21.975Z [ntp] unable to create socket on eth0 (5) for fe80::821f:12ff:fe63:90a5%3#123
2023-09-28T12:39:21.974Z [ntp] bind(24) AF_INET6 fe80::821f:12ff:fe63:90a5%3#123 flags 0x11 failed: Cannot assign requested address
2023-09-28T12:39:19.248Z [] process '/usr/sbin/netplugd' started with executable stack
2023-09-28T12:39:14.913Z [init] wb-mqtt-w1.service: Failed with result 'signal'.

2023-09-28T12:39:14.853Z [init] wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
2023-09-28T12:38:39.209Z [bluetooth] sap-server: Operation not permitted (1)
2023-09-28T12:38:39.195Z [bluetooth] profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
2023-09-28T12:38:31.709Z [] RTL871X: module init ret=0
2023-09-28T12:38:31.669Z [] RTL871X: rtw_ndev_init(wlan1)
2023-09-28T12:38:31.649Z [] RTL871X: rtw_ndev_init(wlan0)
2023-09-28T12:38:31.389Z [] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40
2023-09-28T12:38:31.388Z [] RTL871X: module init start
2023-09-28T12:38:30.699Z [] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
2023-09-28T12:38:28.148Z [] usb usb1-port1: over-current condition
2023-09-28T12:38:27.098Z [] imx_usb 2184000.usb: No over current polarity defined
2023-09-28T12:38:25.508Z [] gpio-11 (onewire_w2): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:38:25.408Z [] gpio-68 (onewire_w1): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:38:23.665Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:88 Unknown group 'kvm', ignoring
2023-09-28T12:38:23.663Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:86 Unknown group 'kvm', ignoring
2023-09-28T12:38:23.659Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:41 Unknown group 'render', ignoring
2023-09-28T12:38:23.657Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:40 Unknown group 'render', ignoring
2023-09-28T12:38:23.606Z [systemd-udevd] /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.

2023-09-28T12:38:23.315Z [systemd-tmpfiles-setup-dev] /usr/lib/tmpfiles.d/static-nodes-permissions.conf:17: Failed to resolve group 'kvm'.
2023-09-28T12:38:22.149Z [] lm75 4-0048: supply vs not found, using dummy regulator
2023-09-28T12:38:22.126Z [] at24 6-0050: supply vcc not found, using dummy regulator
2023-09-28T12:38:22.106Z [] at24 5-0050: supply vcc not found, using dummy regulator
2023-09-28T12:38:22.077Z [] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
2023-09-28T12:38:22.048Z [] gpio-30 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:38:22.046Z [] gpio-71 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:38:22.045Z [] gpio-70 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:38:22.043Z [] gpio-67 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:38:22.043Z [] gpio-76 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:38:22.040Z [] gpio-49 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:38:22.040Z [] gpio-48 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:38:22.014Z [] imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000
2023-09-28T12:38:22.000Z [] debugfs: Directory 'dummy-iomuxc-gpr@20e4000' with parent 'regmap' already present!
2023-09-28T12:37:51.993Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:37:51.947Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:37:49.960Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:37:49.957Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:37:47.697Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:37:47.696Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:37:45.382Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:37:45.301Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:37:42.808Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:37:42.783Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:37:40.301Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:37:40.229Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:37:38.052Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:37:38.001Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:37:35.816Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:37:35.769Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:37:33.495Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:37:33.436Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:37:30.847Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:37:30.804Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:37:28.263Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:37:28.169Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:37:25.433Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:37:25.356Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:37:19.869Z [] RTL871X: assoc success
2023-09-28T12:37:14.288Z [] process '/usr/sbin/netplugd' started with executable stack
2023-09-28T12:37:09.760Z [init] wb-mqtt-w1.service: Failed with result 'signal'.

2023-09-28T12:37:09.751Z [init] wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
2023-09-28T12:36:33.539Z [bluetooth] sap-server: Operation not permitted (1)
2023-09-28T12:36:33.533Z [bluetooth] profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
2023-09-28T12:36:26.069Z [] RTL871X: module init ret=0
2023-09-28T12:36:26.028Z [] RTL871X: rtw_ndev_init(wlan1)
2023-09-28T12:36:25.998Z [] RTL871X: rtw_ndev_init(wlan0)
2023-09-28T12:36:25.720Z [] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40
2023-09-28T12:36:25.720Z [] RTL871X: module init start
2023-09-28T12:36:25.040Z [] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
2023-09-28T12:36:22.378Z [] usb usb1-port1: over-current condition
2023-09-28T12:36:21.378Z [] imx_usb 2184000.usb: No over current polarity defined
2023-09-28T12:36:19.848Z [] gpio-11 (onewire_w2): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:36:19.748Z [] gpio-68 (onewire_w1): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:36:17.942Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:88 Unknown group 'kvm', ignoring
2023-09-28T12:36:17.940Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:86 Unknown group 'kvm', ignoring
2023-09-28T12:36:17.936Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:41 Unknown group 'render', ignoring
2023-09-28T12:36:17.934Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:40 Unknown group 'render', ignoring
2023-09-28T12:36:17.885Z [systemd-udevd] /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.

2023-09-28T12:36:17.595Z [systemd-tmpfiles-setup-dev] /usr/lib/tmpfiles.d/static-nodes-permissions.conf:17: Failed to resolve group 'kvm'.
2023-09-28T12:36:16.491Z [] lm75 4-0048: supply vs not found, using dummy regulator
2023-09-28T12:36:16.460Z [] at24 6-0050: supply vcc not found, using dummy regulator
2023-09-28T12:36:16.455Z [] at24 5-0050: supply vcc not found, using dummy regulator
2023-09-28T12:36:16.446Z [] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
2023-09-28T12:36:16.404Z [] gpio-30 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:36:16.401Z [] gpio-71 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:36:16.401Z [] gpio-70 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:36:16.399Z [] gpio-67 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:36:16.378Z [] gpio-76 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:36:16.376Z [] gpio-49 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:36:16.375Z [] gpio-48 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:36:16.370Z [] imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000
2023-09-28T12:36:16.347Z [] debugfs: Directory 'dummy-iomuxc-gpr@20e4000' with parent 'regmap' already present!
2023-09-28T12:35:41.366Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:35:41.311Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:35:38.951Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:35:38.802Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:35:36.643Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:35:36.641Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:35:33.997Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:35:33.962Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:35:31.521Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:35:31.520Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:35:29.135Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:35:29.134Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:35:26.713Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:35:26.670Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:35:24.154Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:35:24.093Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:35:21.603Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:35:21.584Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:35:19.019Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:35:18.935Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:35:16.872Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:35:16.772Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:35:12.177Z [ntp] unable to create socket on wlan0 (7) for fe80::7e25:daff:fe1f:5d04%5#123

2023-09-28T12:35:12.176Z [ntp] bind(26) AF_INET6 fe80::7e25:daff:fe1f:5d04%5#123 flags 0x11 failed: Cannot assign requested address
2023-09-28T12:35:10.589Z [] RTL871X: assoc success
2023-09-28T12:35:10.374Z [init] wb-mqtt-knx.service: Failed with result 'exit-code'.
2023-09-28T12:35:10.073Z [wb-mqtt-knx] ERROR: Mqtt connect error localhost:1883 :  @ wblib/mqtt.cpp:255
2023-09-28T12:35:07.718Z [] process '/usr/sbin/netplugd' started with executable stack
2023-09-28T12:35:03.337Z [init] wb-mqtt-w1.service: Failed with result 'signal'.

2023-09-28T12:35:03.322Z [init] wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
2023-09-28T12:34:27.933Z [bluetooth] sap-server: Operation not permitted (1)
2023-09-28T12:34:27.932Z [bluetooth] profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
2023-09-28T12:34:20.460Z [] RTL871X: module init ret=0
2023-09-28T12:34:20.418Z [] RTL871X: rtw_ndev_init(wlan1)
2023-09-28T12:34:20.388Z [] RTL871X: rtw_ndev_init(wlan0)
2023-09-28T12:34:20.141Z [] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40
2023-09-28T12:34:20.140Z [] RTL871X: module init start
2023-09-28T12:34:19.492Z [] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
2023-09-28T12:34:16.868Z [] usb usb1-port1: over-current condition
2023-09-28T12:34:15.822Z [] imx_usb 2184000.usb: No over current polarity defined
2023-09-28T12:34:15.822Z [] imx_usb 2184000.usb: No over current polarity defined
2023-09-28T12:34:14.268Z [] gpio-11 (onewire_w2): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:34:14.168Z [] gpio-68 (onewire_w1): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:34:12.407Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:88 Unknown group 'kvm', ignoring
2023-09-28T12:34:12.405Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:86 Unknown group 'kvm', ignoring
2023-09-28T12:34:12.401Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:41 Unknown group 'render', ignoring
2023-09-28T12:34:12.399Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:40 Unknown group 'render', ignoring
2023-09-28T12:34:12.348Z [systemd-udevd] /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.

2023-09-28T12:34:11.985Z [systemd-tmpfiles-setup-dev] /usr/lib/tmpfiles.d/static-nodes-permissions.conf:17: Failed to resolve group 'kvm'.
2023-09-28T12:34:10.975Z [] lm75 4-0048: supply vs not found, using dummy regulator
2023-09-28T12:34:10.975Z [] lm75 4-0048: supply vs not found, using dummy regulator
2023-09-28T12:34:10.934Z [] at24 6-0050: supply vcc not found, using dummy regulator
2023-09-28T12:34:10.929Z [] at24 5-0050: supply vcc not found, using dummy regulator
2023-09-28T12:34:10.900Z [] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
2023-09-28T12:34:10.869Z [] gpio-30 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:34:10.860Z [] gpio-71 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:34:10.859Z [] gpio-70 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:34:10.838Z [] gpio-67 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:34:10.837Z [] gpio-76 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:34:10.835Z [] gpio-49 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:34:10.835Z [] gpio-49 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:34:10.835Z [] gpio-48 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:34:10.829Z [] imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000
2023-09-28T12:34:10.807Z [] debugfs: Directory 'dummy-iomuxc-gpr@20e4000' with parent 'regmap' already present!
2023-09-28T12:33:41.052Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:33:41.025Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:33:38.759Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:33:38.703Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:33:36.634Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:33:36.586Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:33:36.586Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:33:34.231Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:33:34.230Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:33:31.891Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:33:31.890Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:33:31.890Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:33:29.533Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:33:29.532Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:33:27.177Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:33:27.146Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:33:24.976Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:33:24.974Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:33:22.636Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:33:22.594Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:33:20.441Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:33:20.441Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:33:20.406Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:33:17.898Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:33:17.843Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:33:15.330Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:33:15.276Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:33:12.914Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:33:13.270Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:33:08.391Z [ntp] unable to create socket on wlan0 (7) for fe80::7e25:daff:fe1f:5d04%5#123

2023-09-28T12:33:08.390Z [ntp] bind(26) AF_INET6 fe80::7e25:daff:fe1f:5d04%5#123 flags 0x11 failed: Cannot assign requested address
2023-09-28T12:33:08.390Z [ntp] bind(26) AF_INET6 fe80::7e25:daff:fe1f:5d04%5#123 flags 0x11 failed: Cannot assign requested address
2023-09-28T12:33:06.993Z [] RTL871X: assoc success
2023-09-28T12:33:01.868Z [] process '/usr/sbin/netplugd' started with executable stack
2023-09-28T12:32:57.571Z [init] wb-mqtt-w1.service: Failed with result 'signal'.

2023-09-28T12:32:57.541Z [init] wb-mqtt-w1.service: Main process exited, code=killed, status=6/ABRT
2023-09-28T12:32:22.137Z [bluetooth] sap-server: Operation not permitted (1)
2023-09-28T12:32:22.136Z [bluetooth] profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
2023-09-28T12:32:14.919Z [] RTL871X: module init ret=0
2023-09-28T12:32:14.898Z [] RTL871X: rtw_ndev_init(wlan1)
2023-09-28T12:32:14.898Z [] RTL871X: rtw_ndev_init(wlan1)
2023-09-28T12:32:14.878Z [] RTL871X: rtw_ndev_init(wlan0)
2023-09-28T12:32:14.609Z [] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40
2023-09-28T12:32:14.609Z [] RTL871X: module init start
2023-09-28T12:32:13.789Z [] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
2023-09-28T12:32:11.158Z [] usb usb1-port1: over-current condition
2023-09-28T12:32:10.148Z [] imx_usb 2184000.usb: No over current polarity defined
2023-09-28T12:32:08.658Z [] gpio-11 (onewire_w2): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:32:08.558Z [] gpio-68 (onewire_w1): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:32:06.732Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:88 Unknown group 'kvm', ignoring
2023-09-28T12:32:06.732Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:88 Unknown group 'kvm', ignoring
2023-09-28T12:32:06.730Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:86 Unknown group 'kvm', ignoring
2023-09-28T12:32:06.726Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:41 Unknown group 'render', ignoring
2023-09-28T12:32:06.724Z [systemd-udevd] /usr/lib/udev/rules.d/50-udev-default.rules:40 Unknown group 'render', ignoring
2023-09-28T12:32:06.671Z [systemd-udevd] /etc/systemd/network/99-default.link: No valid settings found in the [Match] section, ignoring file. To match all interfaces, add OriginalName=* in the [Match] section.

2023-09-28T12:32:06.336Z [systemd-tmpfiles-setup-dev] /usr/lib/tmpfiles.d/static-nodes-permissions.conf:17: Failed to resolve group 'kvm'.
2023-09-28T12:32:05.257Z [] lm75 4-0048: supply vs not found, using dummy regulator
2023-09-28T12:32:05.224Z [] at24 6-0050: supply vcc not found, using dummy regulator
2023-09-28T12:32:05.220Z [] at24 5-0050: supply vcc not found, using dummy regulator
2023-09-28T12:32:05.211Z [] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
2023-09-28T12:32:05.211Z [] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
2023-09-28T12:32:05.177Z [] gpio-30 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:32:05.174Z [] gpio-71 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:32:05.174Z [] gpio-70 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:32:05.172Z [] gpio-67 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:32:05.171Z [] gpio-76 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:32:05.169Z [] gpio-49 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:32:05.169Z [] gpio-48 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file
2023-09-28T12:32:05.144Z [] imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000
2023-09-28T12:32:05.140Z [] debugfs: Directory 'dummy-iomuxc-gpr@20e4000' with parent 'regmap' already present!
2023-09-28T12:32:05.140Z [] debugfs: Directory 'dummy-iomuxc-gpr@20e4000' with parent 'regmap' already present!
2023-09-28T12:31:29.676Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:31:29.619Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:31:27.102Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:31:27.101Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:31:24.665Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:31:24.664Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:31:22.000Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.
2023-09-28T12:31:21.921Z [init] wb-mqtt-opcua.service: Failed with result 'exit-code'.
2023-09-28T12:31:19.664Z [init] Failed to start Wiren Board MQTT to OPC UA gateway.