-- Logs begin at Sun 2022-06-05 15:58:04 UTC, end at Wed 2022-08-03 13:54:07 UTC. --
Jun 07 08:13:09 wirenboard-A3JSMBLI wb-mqtt-serial[1404]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 07 08:22:21 wirenboard-A3JSMBLI wb-mqtt-serial[1404]: WARNING: [modbus] failed to read 4 input(s) @ 4880 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 07 08:22:33 wirenboard-A3JSMBLI wb-mqtt-serial[1404]: WARNING: [modbus] failed to read 8 input(s) @ 5136 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 07 08:27:23 wirenboard-A3JSMBLI wb-mqtt-serial[1404]: WARNING: [modbus] failed to read 2 input(s) @ 4284 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 07 08:48:17 wirenboard-A3JSMBLI wb-mqtt-serial[1404]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 07 09:28:59 wirenboard-A3JSMBLI wb-mqtt-serial[1404]: WARNING: [modbus] failed to read 6 input(s) @ 6160 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 07 09:53:00 wirenboard-A3JSMBLI wb-mqtt-serial[1404]: WARNING: [modbus] failed to read 8 input(s) @ 4640 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 07 09:55:12 wirenboard-A3JSMBLI wb-mqtt-serial[1404]: WARNING: [modbus] failed to read 1 input(s) @ 121 of device modbus:82: Serial protocol error: malformed response: invalid crc
-- Reboot --
Jun 08 10:05:23 wirenboard-A3JSMBLI systemd[1]: Started MQTT Driver for serial devices.
Jun 08 10:05:51 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: INFO: [serial config] "WB-MAP12E fw2 82" channel "Supply voltage" override property "enabled"
Jun 08 10:05:52 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Jun 08 10:05:52 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Jun 08 10:05:52 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: INFO: [mqtt] connection estabilished with code "0" <success>
Jun 08 10:05:52 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: INFO: [mqtt] subscription succeeded (message id 1)
Jun 08 10:05:52 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: INFO: [mqtt] subscription succeeded (message id 2)
Jun 08 10:05:52 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: INFO: [mqtt] subscription succeeded (message id 195)
Jun 08 10:05:52 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: INFO: [mqtt] subscription succeeded (message id 196)
Jun 08 10:05:54 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: WARNING: [serial] no devices defined for port </dev/ttyRS485-2 9600 8 N 2>. Skipping.
Jun 08 10:05:54 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: INFO: [mqtt] subscription succeeded (message id 200)
Jun 08 10:05:54 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: WARNING: [modbus] failed to write: <modbus:82:holding: 5280>: Serial protocol error: request timed out
Jun 08 10:05:55 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: WARNING: [modbus] failed to write: <modbus:82:holding: 5280>: Serial protocol error: request timed out
Jun 08 10:05:55 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: INFO: [serial device] device modbus:82 is disconnected
Jun 08 10:05:55 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: INFO: [modbus] Init: Channel 1 Actual Phase L1: setup register <modbus:82:holding: 5280> <-- 1 (0x1)
Jun 08 10:05:55 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: INFO: [modbus] Init: Channel 1 Phi L1: setup register <modbus:82:holding: 5219> <-- 1549 (0x60d)
Jun 08 10:05:55 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: INFO: [modbus] Init: Channel 1 Turns L1: setup register <modbus:82:holding: 5216> <-- 1998 (0x7ce)
Jun 08 10:05:55 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: INFO: [serial client] device modbus:82 is connected
Jun 08 14:15:32 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: WARNING: [modbus] failed to read 8 input(s) @ 4608 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 08 14:34:40 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: WARNING: [modbus] failed to read 4 input(s) @ 4880 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 08 15:01:43 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 08 15:01:45 wirenboard-A3JSMBLI wb-mqtt-serial[1483]: WARNING: [modbus] failed to read 8 input(s) @ 4608 of device modbus:82: Serial protocol error: malformed response: invalid crc
-- Reboot --
Jun 10 14:32:40 wirenboard-A3JSMBLI systemd[1]: Started MQTT Driver for serial devices.
Jun 10 14:33:02 wirenboard-A3JSMBLI wb-mqtt-serial[1258]: INFO: [serial config] "WB-MAP12E fw2 82" channel "Supply voltage" override property "enabled"
Jun 10 14:33:02 wirenboard-A3JSMBLI wb-mqtt-serial[1258]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Jun 10 14:33:02 wirenboard-A3JSMBLI wb-mqtt-serial[1258]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Jun 10 14:33:02 wirenboard-A3JSMBLI wb-mqtt-serial[1258]: INFO: [mqtt] connection estabilished with code "0" <success>
Jun 10 14:33:02 wirenboard-A3JSMBLI wb-mqtt-serial[1258]: INFO: [mqtt] subscription succeeded (message id 1)
Jun 10 14:33:02 wirenboard-A3JSMBLI wb-mqtt-serial[1258]: INFO: [mqtt] subscription succeeded (message id 2)
Jun 10 14:33:03 wirenboard-A3JSMBLI wb-mqtt-serial[1258]: INFO: [mqtt] subscription succeeded (message id 195)
Jun 10 14:33:03 wirenboard-A3JSMBLI wb-mqtt-serial[1258]: INFO: [mqtt] subscription succeeded (message id 196)
Jun 10 14:33:04 wirenboard-A3JSMBLI wb-mqtt-serial[1258]: WARNING: [serial] no devices defined for port </dev/ttyRS485-2 9600 8 N 2>. Skipping.
Jun 10 14:33:04 wirenboard-A3JSMBLI wb-mqtt-serial[1258]: INFO: [modbus] Init: Channel 1 Actual Phase L1: setup register <modbus:82:holding: 5280> <-- 1 (0x1)
Jun 10 14:33:04 wirenboard-A3JSMBLI wb-mqtt-serial[1258]: INFO: [mqtt] subscription succeeded (message id 200)
Jun 10 14:33:04 wirenboard-A3JSMBLI wb-mqtt-serial[1258]: INFO: [modbus] Init: Channel 1 Phi L1: setup register <modbus:82:holding: 5219> <-- 1549 (0x60d)
Jun 10 14:33:04 wirenboard-A3JSMBLI wb-mqtt-serial[1258]: INFO: [modbus] Init: Channel 1 Turns L1: setup register <modbus:82:holding: 5216> <-- 1998 (0x7ce)
Jun 10 14:33:04 wirenboard-A3JSMBLI wb-mqtt-serial[1258]: INFO: [serial client] device modbus:82 is connected
Jun 17 11:25:12 wirenboard-A3JSMBLI wb-mqtt-serial[1258]: INFO: [signal handling] Received signal 15
Jun 17 11:25:12 wirenboard-A3JSMBLI systemd[1]: Stopping MQTT Driver for serial devices...
Jun 17 11:25:14 wirenboard-A3JSMBLI systemd[1]: Stopped MQTT Driver for serial devices.
Jun 17 11:25:14 wirenboard-A3JSMBLI systemd[1]: Started MQTT Driver for serial devices.
Jun 17 11:25:18 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [serial config] "WB-MAP12E fw2 82" channel "Supply voltage" override property "enabled"
Jun 17 11:25:18 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Jun 17 11:25:18 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Jun 17 11:25:18 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [mqtt] connection estabilished with code "0" <success>
Jun 17 11:25:18 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [mqtt] subscription succeeded (message id 1)
Jun 17 11:25:18 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [mqtt] subscription succeeded (message id 2)
Jun 17 11:25:18 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [mqtt] subscription succeeded (message id 146)
Jun 17 11:25:18 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [mqtt] subscription succeeded (message id 147)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: WARNING: [serial] no devices defined for port </dev/ttyRS485-2 9600 8 N 2>. Skipping.
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [mqtt] subscription succeeded (message id 151)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 1 Actual Phase L1: setup register <modbus:82:holding: 5280> <-- 1 (0x1)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 1 Phi L1: setup register <modbus:82:holding: 5219> <-- 631 (0x277)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 1 Turns L1: setup register <modbus:82:holding: 5216> <-- 2993 (0xbb1)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 1 Actual Phase L2: setup register <modbus:82:holding: 5281> <-- 2 (0x2)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 1 Phi L2: setup register <modbus:82:holding: 5220> <-- 1024 (0x400)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 1 Turns L2: setup register <modbus:82:holding: 5217> <-- 2998 (0xbb6)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 1 Actual Phase L3: setup register <modbus:82:holding: 5282> <-- 3 (0x3)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 1 Phi L3: setup register <modbus:82:holding: 5221> <-- 919 (0x397)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 1 Turns L3: setup register <modbus:82:holding: 5218> <-- 2996 (0xbb4)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 2 Actual Phase L1: setup register <modbus:82:holding: 9376> <-- 1 (0x1)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 2 Phi L1: setup register <modbus:82:holding: 9315> <-- 1549 (0x60d)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 2 Turns L1: setup register <modbus:82:holding: 9312> <-- 1998 (0x7ce)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 2 Actual Phase L2: setup register <modbus:82:holding: 9377> <-- 2 (0x2)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 2 Phi L2: setup register <modbus:82:holding: 9316> <-- 1549 (0x60d)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 2 Turns L2: setup register <modbus:82:holding: 9313> <-- 1998 (0x7ce)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 2 Actual Phase L3: setup register <modbus:82:holding: 9378> <-- 3 (0x3)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 2 Phi L3: setup register <modbus:82:holding: 9317> <-- 1549 (0x60d)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 2 Turns L3: setup register <modbus:82:holding: 9314> <-- 1998 (0x7ce)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 3 Actual Phase L3: setup register <modbus:82:holding: 13474> <-- 3 (0x3)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 3 Phi L3: setup register <modbus:82:holding: 13413> <-- 1549 (0x60d)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 3 Turns L3: setup register <modbus:82:holding: 13410> <-- 1998 (0x7ce)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 4 Actual Phase L2: setup register <modbus:82:holding: 17569> <-- 2 (0x2)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 4 Phi L2: setup register <modbus:82:holding: 17508> <-- 1549 (0x60d)
Jun 17 11:25:19 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [modbus] Init: Channel 4 Turns L2: setup register <modbus:82:holding: 17505> <-- 1998 (0x7ce)
Jun 17 11:25:20 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [serial client] device modbus:82 is connected
Jun 20 05:25:22 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: WARNING: [modbus] failed to read 1 input(s) @ 121 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 21 09:08:23 wirenboard-A3JSMBLI wb-mqtt-serial[7835]: INFO: [signal handling] Received signal 15
Jun 21 09:08:23 wirenboard-A3JSMBLI systemd[1]: Stopping MQTT Driver for serial devices...
Jun 21 09:08:24 wirenboard-A3JSMBLI systemd[1]: Stopped MQTT Driver for serial devices.
Jun 21 09:08:24 wirenboard-A3JSMBLI systemd[1]: Started MQTT Driver for serial devices.
Jun 21 09:08:27 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [serial config] "WB-MAP12E fw2 82" channel "Supply voltage" override property "enabled"
Jun 21 09:08:27 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Jun 21 09:08:27 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Jun 21 09:08:27 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [mqtt] connection estabilished with code "0" <success>
Jun 21 09:08:27 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [mqtt] subscription succeeded (message id 1)
Jun 21 09:08:27 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [mqtt] subscription succeeded (message id 2)
Jun 21 09:08:27 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [mqtt] subscription succeeded (message id 146)
Jun 21 09:08:27 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [mqtt] subscription succeeded (message id 147)
Jun 21 09:08:28 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: WARNING: [serial] no devices defined for port </dev/ttyRS485-2 9600 8 N 2>. Skipping.
Jun 21 09:08:28 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 1 Actual Phase L1: setup register <modbus:82:holding: 5280> <-- 1 (0x1)
Jun 21 09:08:28 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [mqtt] subscription succeeded (message id 151)
Jun 21 09:08:28 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 1 Phi L1: setup register <modbus:82:holding: 5219> <-- 631 (0x277)
Jun 21 09:08:28 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 1 Turns L1: setup register <modbus:82:holding: 5216> <-- 2993 (0xbb1)
Jun 21 09:08:28 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 1 Actual Phase L2: setup register <modbus:82:holding: 5281> <-- 2 (0x2)
Jun 21 09:08:28 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 1 Phi L2: setup register <modbus:82:holding: 5220> <-- 1024 (0x400)
Jun 21 09:08:28 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 1 Turns L2: setup register <modbus:82:holding: 5217> <-- 2998 (0xbb6)
Jun 21 09:08:28 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 1 Actual Phase L3: setup register <modbus:82:holding: 5282> <-- 3 (0x3)
Jun 21 09:08:28 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 1 Phi L3: setup register <modbus:82:holding: 5221> <-- 919 (0x397)
Jun 21 09:08:28 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 1 Turns L3: setup register <modbus:82:holding: 5218> <-- 2996 (0xbb4)
Jun 21 09:08:28 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 2 Actual Phase L1: setup register <modbus:82:holding: 9376> <-- 1 (0x1)
Jun 21 09:08:28 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 2 Phi L1: setup register <modbus:82:holding: 9315> <-- 1549 (0x60d)
Jun 21 09:08:28 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 2 Turns L1: setup register <modbus:82:holding: 9312> <-- 1998 (0x7ce)
Jun 21 09:08:29 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 2 Actual Phase L2: setup register <modbus:82:holding: 9377> <-- 2 (0x2)
Jun 21 09:08:29 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 2 Phi L2: setup register <modbus:82:holding: 9316> <-- 1006 (0x3ee)
Jun 21 09:08:29 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 2 Turns L2: setup register <modbus:82:holding: 9313> <-- 1993 (0x7c9)
Jun 21 09:08:29 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 2 Actual Phase L3: setup register <modbus:82:holding: 9378> <-- 3 (0x3)
Jun 21 09:08:29 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 2 Phi L3: setup register <modbus:82:holding: 9317> <-- 1973 (0x7b5)
Jun 21 09:08:29 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 2 Turns L3: setup register <modbus:82:holding: 9314> <-- 2001 (0x7d1)
Jun 21 09:08:29 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 3 Actual Phase L3: setup register <modbus:82:holding: 13474> <-- 3 (0x3)
Jun 21 09:08:29 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 3 Phi L3: setup register <modbus:82:holding: 13413> <-- 1036 (0x40c)
Jun 21 09:08:29 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 3 Turns L3: setup register <modbus:82:holding: 13410> <-- 1991 (0x7c7)
Jun 21 09:08:29 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 4 Actual Phase L2: setup register <modbus:82:holding: 17569> <-- 2 (0x2)
Jun 21 09:08:29 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 4 Phi L2: setup register <modbus:82:holding: 17508> <-- 1539 (0x603)
Jun 21 09:08:29 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [modbus] Init: Channel 4 Turns L2: setup register <modbus:82:holding: 17505> <-- 1997 (0x7cd)
Jun 21 09:08:29 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: INFO: [serial client] device modbus:82 is connected
Jun 21 09:15:01 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: WARNING: [modbus] failed to read 1 input(s) @ 4344 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 21 09:16:15 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: WARNING: [modbus] failed to read 2 input(s) @ 17432 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 21 09:17:19 wirenboard-A3JSMBLI wb-mqtt-serial[32377]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device modbus:82: Serial protocol error: malformed response: invalid crc
-- Reboot --
Jun 23 08:23:40 wirenboard-A3JSMBLI systemd[1]: Started MQTT Driver for serial devices.
Jun 23 08:24:08 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [serial config] "WB-MAP12E fw2 82" channel "Supply voltage" override property "enabled"
Jun 23 08:24:08 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Jun 23 08:24:08 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Jun 23 08:24:08 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [mqtt] connection estabilished with code "0" <success>
Jun 23 08:24:08 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [mqtt] subscription succeeded (message id 1)
Jun 23 08:24:08 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [mqtt] subscription succeeded (message id 2)
Jun 23 08:24:09 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [mqtt] subscription succeeded (message id 146)
Jun 23 08:24:09 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [mqtt] subscription succeeded (message id 147)
Jun 23 08:24:10 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [serial] no devices defined for port </dev/ttyRS485-2 9600 8 N 2>. Skipping.
Jun 23 08:24:10 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [mqtt] subscription succeeded (message id 151)
Jun 23 08:24:10 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to write: <modbus:82:holding: 5280>: Serial protocol error: request timed out
Jun 23 08:24:10 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to write: <modbus:82:holding: 5280>: Serial protocol error: request timed out
Jun 23 08:24:10 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [serial device] device modbus:82 is disconnected
Jun 23 08:24:10 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to write: <modbus:82:holding: 5280>: Serial protocol error: request timed out
Jun 23 08:24:10 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 1 Actual Phase L1: setup register <modbus:82:holding: 5280> <-- 1 (0x1)
Jun 23 08:24:10 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 1 Phi L1: setup register <modbus:82:holding: 5219> <-- 631 (0x277)
Jun 23 08:24:10 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 1 Turns L1: setup register <modbus:82:holding: 5216> <-- 2993 (0xbb1)
Jun 23 08:24:10 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 1 Actual Phase L2: setup register <modbus:82:holding: 5281> <-- 2 (0x2)
Jun 23 08:24:10 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 1 Phi L2: setup register <modbus:82:holding: 5220> <-- 1024 (0x400)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 1 Turns L2: setup register <modbus:82:holding: 5217> <-- 2998 (0xbb6)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 1 Actual Phase L3: setup register <modbus:82:holding: 5282> <-- 3 (0x3)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 1 Phi L3: setup register <modbus:82:holding: 5221> <-- 919 (0x397)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 1 Turns L3: setup register <modbus:82:holding: 5218> <-- 2996 (0xbb4)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 2 Actual Phase L1: setup register <modbus:82:holding: 9376> <-- 1 (0x1)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 2 Phi L1: setup register <modbus:82:holding: 9315> <-- 1549 (0x60d)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 2 Turns L1: setup register <modbus:82:holding: 9312> <-- 1998 (0x7ce)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 2 Actual Phase L2: setup register <modbus:82:holding: 9377> <-- 2 (0x2)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 2 Phi L2: setup register <modbus:82:holding: 9316> <-- 1006 (0x3ee)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 2 Turns L2: setup register <modbus:82:holding: 9313> <-- 1993 (0x7c9)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 2 Actual Phase L3: setup register <modbus:82:holding: 9378> <-- 3 (0x3)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 2 Phi L3: setup register <modbus:82:holding: 9317> <-- 1973 (0x7b5)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 2 Turns L3: setup register <modbus:82:holding: 9314> <-- 2001 (0x7d1)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 3 Actual Phase L3: setup register <modbus:82:holding: 13474> <-- 3 (0x3)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 3 Phi L3: setup register <modbus:82:holding: 13413> <-- 1036 (0x40c)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 3 Turns L3: setup register <modbus:82:holding: 13410> <-- 1991 (0x7c7)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 4 Actual Phase L2: setup register <modbus:82:holding: 17569> <-- 2 (0x2)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 4 Phi L2: setup register <modbus:82:holding: 17508> <-- 1539 (0x603)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [modbus] Init: Channel 4 Turns L2: setup register <modbus:82:holding: 17505> <-- 1997 (0x7cd)
Jun 23 08:24:11 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: INFO: [serial client] device modbus:82 is connected
Jun 30 07:34:31 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to read 1 input(s) @ 121 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 30 07:39:51 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to read 6 input(s) @ 6160 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 30 07:55:57 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 30 08:29:39 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to read 2 input(s) @ 17432 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 30 08:42:48 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 30 08:58:41 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 30 09:04:12 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 30 09:56:16 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 30 10:05:12 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to read 1 input(s) @ 121 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 30 10:12:20 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 30 10:14:22 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jun 30 10:22:24 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to read 1 input(s) @ 4344 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jul 05 15:30:49 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jul 06 11:30:31 wirenboard-A3JSMBLI wb-mqtt-serial[1324]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device modbus:82: Serial protocol error: malformed response: invalid crc
-- Reboot --
Jul 11 12:23:21 wirenboard-A3JSMBLI systemd[1]: Started MQTT Driver for serial devices.
Jul 11 12:23:51 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [serial config] "WB-MAP12E fw2 82" channel "Supply voltage" override property "enabled"
Jul 11 12:23:51 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Jul 11 12:23:51 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Jul 11 12:23:51 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [mqtt] connection estabilished with code "0" <success>
Jul 11 12:23:51 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [mqtt] subscription succeeded (message id 1)
Jul 11 12:23:51 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [mqtt] subscription succeeded (message id 2)
Jul 11 12:23:52 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [mqtt] subscription succeeded (message id 146)
Jul 11 12:23:52 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [mqtt] subscription succeeded (message id 147)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: WARNING: [serial] no devices defined for port </dev/ttyRS485-2 9600 8 N 2>. Skipping.
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 1 Actual Phase L1: setup register <modbus:82:holding: 5280> <-- 1 (0x1)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [mqtt] subscription succeeded (message id 151)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 1 Phi L1: setup register <modbus:82:holding: 5219> <-- 631 (0x277)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 1 Turns L1: setup register <modbus:82:holding: 5216> <-- 2993 (0xbb1)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 1 Actual Phase L2: setup register <modbus:82:holding: 5281> <-- 2 (0x2)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 1 Phi L2: setup register <modbus:82:holding: 5220> <-- 1024 (0x400)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 1 Turns L2: setup register <modbus:82:holding: 5217> <-- 2998 (0xbb6)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 1 Actual Phase L3: setup register <modbus:82:holding: 5282> <-- 3 (0x3)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 1 Phi L3: setup register <modbus:82:holding: 5221> <-- 919 (0x397)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 1 Turns L3: setup register <modbus:82:holding: 5218> <-- 2996 (0xbb4)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 2 Actual Phase L1: setup register <modbus:82:holding: 9376> <-- 1 (0x1)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 2 Phi L1: setup register <modbus:82:holding: 9315> <-- 1549 (0x60d)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 2 Turns L1: setup register <modbus:82:holding: 9312> <-- 1998 (0x7ce)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 2 Actual Phase L2: setup register <modbus:82:holding: 9377> <-- 2 (0x2)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 2 Phi L2: setup register <modbus:82:holding: 9316> <-- 1006 (0x3ee)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 2 Turns L2: setup register <modbus:82:holding: 9313> <-- 1993 (0x7c9)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 2 Actual Phase L3: setup register <modbus:82:holding: 9378> <-- 3 (0x3)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 2 Phi L3: setup register <modbus:82:holding: 9317> <-- 1973 (0x7b5)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 2 Turns L3: setup register <modbus:82:holding: 9314> <-- 2001 (0x7d1)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 3 Actual Phase L3: setup register <modbus:82:holding: 13474> <-- 3 (0x3)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 3 Phi L3: setup register <modbus:82:holding: 13413> <-- 1036 (0x40c)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 3 Turns L3: setup register <modbus:82:holding: 13410> <-- 1991 (0x7c7)
Jul 11 12:23:53 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 4 Actual Phase L2: setup register <modbus:82:holding: 17569> <-- 2 (0x2)
Jul 11 12:23:54 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 4 Phi L2: setup register <modbus:82:holding: 17508> <-- 1539 (0x603)
Jul 11 12:23:54 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [modbus] Init: Channel 4 Turns L2: setup register <modbus:82:holding: 17505> <-- 1997 (0x7cd)
Jul 11 12:23:54 wirenboard-A3JSMBLI wb-mqtt-serial[1379]: INFO: [serial client] device modbus:82 is connected
-- Reboot --
Jul 11 12:38:51 wirenboard-A3JSMBLI systemd[1]: Started MQTT Driver for serial devices.
Jul 11 12:39:14 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [serial config] "WB-MAP12E fw2 82" channel "Supply voltage" override property "enabled"
Jul 11 12:39:14 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Jul 11 12:39:14 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Jul 11 12:39:14 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [mqtt] connection estabilished with code "0" <success>
Jul 11 12:39:14 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [mqtt] subscription succeeded (message id 1)
Jul 11 12:39:14 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [mqtt] subscription succeeded (message id 2)
Jul 11 12:39:14 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [mqtt] subscription succeeded (message id 146)
Jul 11 12:39:14 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [mqtt] subscription succeeded (message id 147)
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: WARNING: [serial] no devices defined for port </dev/ttyRS485-2 9600 8 N 2>. Skipping.
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [mqtt] subscription succeeded (message id 151)
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 1 Actual Phase L1: setup register <modbus:82:holding: 5280> <-- 1 (0x1)
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 1 Phi L1: setup register <modbus:82:holding: 5219> <-- 631 (0x277)
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 1 Turns L1: setup register <modbus:82:holding: 5216> <-- 2993 (0xbb1)
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 1 Actual Phase L2: setup register <modbus:82:holding: 5281> <-- 2 (0x2)
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 1 Phi L2: setup register <modbus:82:holding: 5220> <-- 1024 (0x400)
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 1 Turns L2: setup register <modbus:82:holding: 5217> <-- 2998 (0xbb6)
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 1 Actual Phase L3: setup register <modbus:82:holding: 5282> <-- 3 (0x3)
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 1 Phi L3: setup register <modbus:82:holding: 5221> <-- 919 (0x397)
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 1 Turns L3: setup register <modbus:82:holding: 5218> <-- 2996 (0xbb4)
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 2 Actual Phase L1: setup register <modbus:82:holding: 9376> <-- 1 (0x1)
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 2 Phi L1: setup register <modbus:82:holding: 9315> <-- 1549 (0x60d)
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 2 Turns L1: setup register <modbus:82:holding: 9312> <-- 1998 (0x7ce)
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 2 Actual Phase L2: setup register <modbus:82:holding: 9377> <-- 2 (0x2)
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 2 Phi L2: setup register <modbus:82:holding: 9316> <-- 1006 (0x3ee)
Jul 11 12:39:15 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 2 Turns L2: setup register <modbus:82:holding: 9313> <-- 1993 (0x7c9)
Jul 11 12:39:16 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 2 Actual Phase L3: setup register <modbus:82:holding: 9378> <-- 3 (0x3)
Jul 11 12:39:16 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 2 Phi L3: setup register <modbus:82:holding: 9317> <-- 1973 (0x7b5)
Jul 11 12:39:16 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 2 Turns L3: setup register <modbus:82:holding: 9314> <-- 2001 (0x7d1)
Jul 11 12:39:16 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 3 Actual Phase L3: setup register <modbus:82:holding: 13474> <-- 3 (0x3)
Jul 11 12:39:16 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 3 Phi L3: setup register <modbus:82:holding: 13413> <-- 1036 (0x40c)
Jul 11 12:39:16 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 3 Turns L3: setup register <modbus:82:holding: 13410> <-- 1991 (0x7c7)
Jul 11 12:39:16 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 4 Actual Phase L2: setup register <modbus:82:holding: 17569> <-- 2 (0x2)
Jul 11 12:39:16 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 4 Phi L2: setup register <modbus:82:holding: 17508> <-- 1539 (0x603)
Jul 11 12:39:16 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [modbus] Init: Channel 4 Turns L2: setup register <modbus:82:holding: 17505> <-- 1997 (0x7cd)
Jul 11 12:39:16 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: INFO: [serial client] device modbus:82 is connected
Jul 13 05:30:32 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device modbus:82: Serial protocol error: malformed response: invalid crc
Jul 13 07:50:37 wirenboard-A3JSMBLI wb-mqtt-serial[1242]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device modbus:82: Serial protocol error: malformed response: invalid crc
-- Reboot --
Aug 01 07:26:57 wirenboard-A3JSMBLI systemd[1]: Started MQTT Driver for serial devices.
Aug 01 07:27:26 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [serial config] "WB-MAP12E fw2 82" channel "Supply voltage" override property "enabled"
Aug 01 07:27:27 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [mqtt] Default host and port detected, checking if UNIX socket exists on /var/run/mosquitto/mosquitto.sock
Aug 01 07:27:27 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [mqtt] UNIX socket not found, falling back to TCP connection
Aug 01 07:27:27 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [mqtt] connection estabilished with code "0" <success>
Aug 01 07:27:27 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [mqtt] subscription succeeded (message id 1)
Aug 01 07:27:27 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [mqtt] subscription succeeded (message id 2)
Aug 01 07:27:27 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [mqtt] subscription succeeded (message id 146)
Aug 01 07:27:27 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [mqtt] subscription succeeded (message id 147)
Aug 01 07:27:28 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [serial] no devices defined for port </dev/ttyRS485-2 9600 8 N 2>. Skipping.
Aug 01 07:27:28 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [mqtt] subscription succeeded (message id 151)
Aug 01 07:27:28 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to write: <modbus:82:holding: 5280>: Serial protocol error: request timed out
Aug 01 07:27:28 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to write: <modbus:82:holding: 5280>: Serial protocol error: request timed out
Aug 01 07:27:28 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [serial device] device modbus:82 is disconnected
Aug 01 07:27:29 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to write: <modbus:82:holding: 5280>: Serial protocol error: request timed out
Aug 01 07:27:29 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to write: <modbus:82:holding: 5280>: Serial protocol error: request timed out
Aug 01 07:27:29 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to write: <modbus:82:holding: 5280>: Serial protocol error: request timed out
Aug 01 07:27:29 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to write: <modbus:82:holding: 5280>: Serial protocol error: request timed out
Aug 01 07:27:29 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to write: <modbus:82:holding: 5280>: Serial protocol error: request timed out
Aug 01 07:27:29 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 1 Actual Phase L1: setup register <modbus:82:holding: 5280> <-- 1 (0x1)
Aug 01 07:27:29 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 1 Phi L1: setup register <modbus:82:holding: 5219> <-- 631 (0x277)
Aug 01 07:27:29 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 1 Turns L1: setup register <modbus:82:holding: 5216> <-- 2993 (0xbb1)
Aug 01 07:27:29 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 1 Actual Phase L2: setup register <modbus:82:holding: 5281> <-- 2 (0x2)
Aug 01 07:27:29 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 1 Phi L2: setup register <modbus:82:holding: 5220> <-- 1024 (0x400)
Aug 01 07:27:29 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 1 Turns L2: setup register <modbus:82:holding: 5217> <-- 2998 (0xbb6)
Aug 01 07:27:29 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 1 Actual Phase L3: setup register <modbus:82:holding: 5282> <-- 3 (0x3)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 1 Phi L3: setup register <modbus:82:holding: 5221> <-- 919 (0x397)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 1 Turns L3: setup register <modbus:82:holding: 5218> <-- 2996 (0xbb4)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 2 Actual Phase L1: setup register <modbus:82:holding: 9376> <-- 1 (0x1)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 2 Phi L1: setup register <modbus:82:holding: 9315> <-- 1549 (0x60d)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 2 Turns L1: setup register <modbus:82:holding: 9312> <-- 1998 (0x7ce)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 2 Actual Phase L2: setup register <modbus:82:holding: 9377> <-- 2 (0x2)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 2 Phi L2: setup register <modbus:82:holding: 9316> <-- 1006 (0x3ee)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 2 Turns L2: setup register <modbus:82:holding: 9313> <-- 1993 (0x7c9)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 2 Actual Phase L3: setup register <modbus:82:holding: 9378> <-- 3 (0x3)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 2 Phi L3: setup register <modbus:82:holding: 9317> <-- 1973 (0x7b5)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 2 Turns L3: setup register <modbus:82:holding: 9314> <-- 2001 (0x7d1)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 3 Actual Phase L3: setup register <modbus:82:holding: 13474> <-- 3 (0x3)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 3 Phi L3: setup register <modbus:82:holding: 13413> <-- 1036 (0x40c)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 3 Turns L3: setup register <modbus:82:holding: 13410> <-- 1991 (0x7c7)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 4 Actual Phase L2: setup register <modbus:82:holding: 17569> <-- 2 (0x2)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 4 Phi L2: setup register <modbus:82:holding: 17508> <-- 1539 (0x603)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [modbus] Init: Channel 4 Turns L2: setup register <modbus:82:holding: 17505> <-- 1997 (0x7cd)
Aug 01 07:27:30 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: INFO: [serial client] device modbus:82 is connected
Aug 01 07:29:34 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 2 input(s) @ 17432 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 07:46:40 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 1 input(s) @ 4344 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 08:05:49 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 1 input(s) @ 4344 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 08:12:52 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 1 input(s) @ 121 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 08:18:55 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 2 input(s) @ 13338 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 08:34:01 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 3 input(s) @ 4349 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 08:44:05 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 08:54:11 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 2 input(s) @ 13338 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 09:04:16 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 1 input(s) @ 4344 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 09:05:16 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 6 input(s) @ 6160 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 09:14:20 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 1 input(s) @ 121 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 09:21:23 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 09:23:24 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 09:25:24 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 10:07:46 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 10:08:46 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 2 input(s) @ 17432 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 10:20:51 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 2 input(s) @ 13338 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 10:29:31 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 12 input(s) @ 5136 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 10:50:40 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 1 input(s) @ 121 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 11:16:53 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 6 input(s) @ 9238 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 11:27:58 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 1 input(s) @ 121 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 11:39:03 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 2 input(s) @ 13338 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 12:04:13 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 2 input(s) @ 270 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 12:11:16 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 2 input(s) @ 13338 of device modbus:82: Serial protocol error: malformed response: invalid crc
Aug 01 13:01:27 wirenboard-A3JSMBLI wb-mqtt-serial[1450]: WARNING: [modbus] failed to read 1 input(s) @ 4344 of device modbus:82: Serial protocol error: malformed response: invalid crc