U-Boot 2017.03-1.0.2-g6ee0824fba (May 27 2019 - 16:14:52 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 33C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial EEPROM #0 MAC: 04:91:62:c2:1f:3e EEPROM #1 MAC: 04:91:62:c1:e9:9f Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 0 Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found No storage devices, perhaps not 'usb start'ed..? No USB update detected, continuing boot switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 323 bytes read in 59 ms (4.9 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 5127648 bytes read in 344 ms (14.2 MiB/s) MMC read: dev # 0, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt imx6ul-wirenboard660 44588 bytes read in 415 ms (104.5 KiB/s) 682 bytes read in 212 ms (2.9 KiB/s) Applying DT overlay wb6-gsm-sim5300e 597 bytes read in 137 ms (3.9 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu 509 bytes read in 165 ms (2.9 KiB/s) Applying DT overlay wb6-noradio 334 bytes read in 103 ms (2.9 KiB/s) Applying DT overlay wb6-eth1 254 bytes read in 117 ms (2 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x82000000 [ 0x000000 - 0x4e3de0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 9ef33000, end 9ef55fff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.22-wb6 (root@wbdevenv) (gcc version 6.3.0 20170 516 (Debian 6.3.0-18) ) #2 SMP Tue Mar 9 09:47:37 UTC 2021 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache [ 0.000000] OF: fdt:Machine model: Wiren Board rev. 6.6.0 (i.MX6UL/ULL) [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] percpu: Embedded 14 pages/cpu @cefc8000 s25996 r8192 d23156 u5734 4 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 129920 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 r ootwait ro [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 491720K/524288K available (6144K kernel code, 312K rwdata , 2280K rodata, 1024K init, 342K bss, 16184K reserved, 16384K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xb0000000 - 0xd0000000 ( 512 MB) [ 0.000000] modules : 0xaf000000 - 0xb0000000 ( 16 MB) [ 0.000000] .text : 0xb0008000 - 0xb0700000 (7136 kB) [ 0.000000] .init : 0xb0a00000 - 0xb0b00000 (1024 kB) [ 0.000000] .data : 0xb0b00000 - 0xb0b4e140 ( 313 kB) [ 0.000000] .bss : 0xb0b50000 - 0xb0ba5aec ( 343 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478 484971ns [ 0.000056] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002565] Console: colour dummy device 80x30 [ 0.002605] Calibrating delay loop (skipped), value calculated using timer fr equency.. 48.00 BogoMIPS (lpj=240000) [ 0.002636] pid_max: default: 32768 minimum: 301 [ 0.002903] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002930] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.004419] CPU: Testing write buffer coherency: ok [ 0.004995] /cpus/cpu@0 missing clock-frequency property [ 0.005037] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005094] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.007742] Brought up 1 CPUs [ 0.007775] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.007790] CPU: All CPU(s) started in SVC mode. [ 0.009295] devtmpfs: initialized [ 0.035982] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.036750] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns [ 0.036798] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.038203] pinctrl core: initialized pinctrl subsystem [ 0.040756] NET: Registered protocol family 16 [ 0.042673] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.045532] cpuidle: using governor menu [ 0.080683] No ATAGs? [ 0.080739] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.080871] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.083140] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.129093] mxs-dma 1804000.dma-apbh: initialized [ 0.133935] SCSI subsystem initialized [ 0.134567] usbcore: registered new interface driver usbfs [ 0.134722] usbcore: registered new interface driver hub [ 0.134984] usbcore: registered new device driver usb [ 0.136671] i2c-gpio i2c_rtc: using pins 48 (SDA) and 49 (SCL) [ 0.137593] i2c-gpio i2c_eeprom1: using pins 76 (SDA) and 67 (SCL) [ 0.138490] i2c-gpio i2c_eeprom2: using pins 70 (SDA) and 71 (SCL) [ 0.139974] i2c i2c-1: IMX I2C adapter registered [ 0.140020] i2c i2c-1: can't use DMA, using PIO instead. [ 0.140375] Linux video capture interface: v2.00 [ 0.140532] pps_core: LinuxPPS API ver. 1 registered [ 0.140552] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti [ 0.140608] PTP clock support registered [ 0.141494] Advanced Linux Sound Architecture Driver Initialized. [ 0.144027] clocksource: Switched to clocksource mxc_timer1 [ 0.169611] NET: Registered protocol family 2 [ 0.170867] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.170991] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.171147] TCP: Hash tables configured (established 4096 bind 4096) [ 0.171267] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.171323] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.171633] NET: Registered protocol family 1 [ 0.172552] RPC: Registered named UNIX socket transport module. [ 0.172583] RPC: Registered udp transport module. [ 0.172601] RPC: Registered tcp transport module. [ 0.172617] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.177568] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.197162] NFS: Registering the id_resolver key type [ 0.197228] Key type id_resolver registered [ 0.197246] Key type id_legacy registered [ 0.208172] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 47) [ 0.208207] io scheduler noop registered (default) [ 0.208223] io scheduler deadline registered [ 0.208305] io scheduler cfq registered [ 0.215035] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx 6q.bin failed with error -2 [ 0.215078] imx-sdma 20ec000.sdma: external firmware not found, using ROM fir mware [ 0.224233] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 18, base_baud = 5000000) is a IMX [ 0.803363] console [ttymxc0] enabled [ 0.808993] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 55, base_baud = 5000000) is a IMX [ 0.819313] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 56, base_baud = 5000000) is a IMX [ 0.862721] imx_rngc 2284000.rngb: Freescale RNGC registered. [ 0.868858] [drm] Initialized [ 0.908710] brd: module loaded [ 0.928526] loop: module loaded [ 0.936793] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 0.948253] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 0.959134] libphy: Fixed MDIO Bus: probed [ 0.965864] 20b4000.ethernet supply phy not found, using dummy regulator [ 0.973888] pps pps0: new PPS source ptp0 [ 1.007903] libphy: fec_enet_mii_bus: probed [ 1.013579] fec 20b4000.ethernet eth0: registered PHC device 0 [ 1.134128] 2188000.ethernet supply phy not found, using dummy regulator [ 1.255161] pps pps1: new PPS source ptp1 [ 1.260426] libphy: fec_enet_mii_bus: probed [ 1.268607] fec 2188000.ethernet eth1: registered PHC device 1 [ 1.275198] PPP generic driver version 2.4.2 [ 1.280035] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.286725] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.292571] usbcore: registered new interface driver usb-storage [ 1.299195] usbcore: registered new interface driver usbserial [ 1.305349] usbcore: registered new interface driver usbserial_generic [ 1.312006] usbserial: USB Serial support registered for generic [ 1.318743] mousedev: PS/2 mouse device common for all mice [ 1.382817] rtc-pcf8563 4-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 1.399076] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.s nvs:snvs-r as rtc1 [ 1.408201] i2c /dev entries driver [ 1.421778] lm75 4-0048: hwmon0: sensor 'lm75b' [ 1.542790] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.551135] sdhci: Secure Digital Host Controller Interface driver [ 1.557468] sdhci: Copyright(c) Pierre Ossman [ 1.561855] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.634108] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADM A [ 1.653698] ledtrig-cpu: registered to indicate activity on CPUs [ 1.678375] usbcore: registered new interface driver usbhid [ 1.686143] usbhid: USB HID core driver [ 1.712204] NET: Registered protocol family 10 [ 1.719508] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.727431] NET: Registered protocol family 17 [ 1.732102] Key type dns_resolver registered [ 1.741493] Registering SWP/SWPB emulation handler [ 1.748487] registered taskstats version 1 [ 1.770617] random: fast init done [ 1.779053] mmc0: new DDR MMC card at address 0001 [ 1.786158] imx_thermal 2000000.aips-bus:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 1.797150] mmcblk0: mmc0:0001 Q2J54A 3.59 GiB [ 1.802125] mmcblk0boot0: mmc0:0001 Q2J54A partition 1 16.0 MiB [ 1.821043] rtc-pcf8563 4-0051: setting system clock to 2021-04-10 18:27:10 U TC (1618079230) [ 1.829543] of_cfs_init [ 1.832355] mmcblk0boot1: mmc0:0001 Q2J54A partition 2 16.0 MiB [ 1.838881] mmcblk0rpmb: mmc0:0001 Q2J54A partition 3 512 KiB [ 1.847874] of_cfs_init: OK [ 1.856435] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 1.861593] vdd3p0: disabling [ 1.868153] vref-3v3: disabling [ 1.871328] usb1_vbus: disabling [ 1.874678] ALSA device list: [ 1.877659] No soundcards found. [ 1.882147] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incomp atibilities [ 1.891059] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incomp atibilities [ 1.900727] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesyst em [ 1.908164] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 1.920926] EXT4-fs (mmcblk0p2): recovery complete [ 2.098430] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null) [ 2.106826] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.125551] devtmpfs: mounted [ 2.134001] Freeing unused kernel memory: 1024K (b0a00000 - b0b00000) [ 2.398224] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.434663] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL + XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.454688] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 2.495033] systemd[1]: Set hostname to . [ 2.813357] systemd-sysv-generator[134]: [/etc/init.d/wb-mqtt-knx:6] Could no t build name for facility $remote_fs,: Invalid argument [ 3.129730] systemd[1]: Started Forward Password Requests to Wall Directory W atch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 3.165372] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 3.205269] systemd[1]: Started Dispatch Password Requests to Console Directo ry Watch.