=~=~=~=~=~=~=~=~=~=~=~= MobaXterm log 2024.11.29 15:25:13 =~=~=~=~=~=~=~=~=~=~=~= [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb172 (root@wbdevenv) (arm-linux-gnueabih 2 1 0 Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found No storage devices, perhaps not 'usb start'ed..? No USB update detected, continuing boot switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 322 bytes read in 108 ms (2 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 6304616 bytes read in 474 ms (12.7 MiB/s) MMC read: dev # 0, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt imx6ul-wirenboard670 47422 bytes read in 241 ms (191.4 KiB/s) 485 bytes read in 152 ms (2.9 KiB/s) Applying DT overlay wb6-nogsm 597 bytes read in 276 ms (2 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu 509 bytes read in 256 ms (1000 Bytes/s) Applying DT overlay wb6-noradio 334 bytes read in 238 ms (1000 Bytes/s) Applying DT overlay wb6-eth1 254 bytes read in 170 ms (1000 Bytes/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x82000000 [ 0x000000 - 0x603368 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 9ef32000, end 9ef54fff ... OK Starting kernel ... U-Boot 2017.03-1.1.0-gaa233c0fa3 (Jun 09 2020 - 19:28:23 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 35C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 3 2 1 0 Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found No storage devices, perhaps not 'usb start'ed..? No USB update detected, continuing boot switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 322 bytes read in 108 ms (2 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 6304616 bytes read in 474 ms (12.7 MiB/s) MMC read: dev # 0, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt imx6ul-wirenboard670 47422 bytes read in 241 ms (191.4 KiB/s) 485 bytes read in 153 ms (2.9 KiB/s) Applying DT overlay wb6-nogsm 597 bytes read in 276 ms (2 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu 509 bytes read in 256 ms (1000 Bytes/s) Applying DT overlay wb6-noradio 334 bytes read in 239 ms (1000 Bytes/s) Applying DT overlay wb6-eth1 254 bytes read in 170 ms (1000 Bytes/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x82000000 [ 0x000000 - 0x603368 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 9ef32000, end 9ef54fff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb172 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Wed Oct 16 09:17:25 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 6.7.0 (i.MX6UL/ULL) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait ro [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 489364K/524288K available (8192K kernel code, 728K rwdata, 2776K rodata, 1024K init, 283K bss, 18540K reserved, 16384K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x234/0x3dc with crng_init=0 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000019] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000059] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002771] Console: colour dummy device 80x30 [ 0.002831] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002869] pid_max: default: 32768 minimum: 301 [ 0.003264] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.003299] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.004996] CPU: Testing write buffer coherency: ok [ 0.006215] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.007097] devtmpfs: initialized [ 0.024759] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.025258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.025304] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.026675] pinctrl core: initialized pinctrl subsystem [ 0.028645] NET: Registered protocol family 16 [ 0.030885] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.032839] thermal_sys: Registered thermal governor 'step_wise' [ 0.033115] cpuidle: using governor menu [ 0.215819] vdd1p1: supplied by regulator-dummy [ 0.227511] vdd3p0: supplied by regulator-dummy [ 0.239290] cpu: supplied by regulator-dummy [ 0.250971] vddsoc: supplied by regulator-dummy [ 0.587027] No ATAGs? [ 0.587086] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.587107] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.587691] debugfs: Directory 'dummy-iomuxc-gpr@20e4000' with parent 'regmap' already present! [ 0.588354] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.589830] imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000 [ 0.589871] imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl driver [ 0.632153] mxs-dma 1804000.dma-apbh: initialized [ 0.637414] SCSI subsystem initialized [ 0.637889] usbcore: registered new interface driver usbfs [ 0.638011] usbcore: registered new interface driver hub [ 0.638124] usbcore: registered new device driver usb [ 0.638972] gpio-48 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.639100] gpio-49 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.640012] i2c-gpio i2c_rtc: using lines 48 (SDA) and 49 (SCL) [ 0.640743] gpio-76 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.640867] gpio-67 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.641476] i2c-gpio i2c_eeprom1: using lines 76 (SDA) and 67 (SCL) [ 0.642175] gpio-70 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.642298] gpio-71 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.642868] i2c-gpio i2c_eeprom2: using lines 70 (SDA) and 71 (SCL) [ 0.644506] gpio-30 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.644873] i2c i2c-1: IMX I2C adapter registered [ 0.645606] mc: Linux media interface: v0.10 [ 0.645721] videodev: Linux video capture interface: v2.00 [ 0.645872] pps_core: LinuxPPS API ver. 1 registered [ 0.645893] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.645950] PTP clock support registered [ 0.646543] Advanced Linux Sound Architecture Driver Initialized. [ 0.648668] clocksource: Switched to clocksource mxc_timer1 [ 0.666402] NET: Registered protocol family 2 [ 0.667687] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.667787] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.667890] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.667994] TCP: Hash tables configured (established 4096 bind 4096) [ 0.668181] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.668234] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.668557] NET: Registered protocol family 1 [ 0.669612] RPC: Registered named UNIX socket transport module. [ 0.669649] RPC: Registered udp transport module. [ 0.669666] RPC: Registered tcp transport module. [ 0.669682] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.670755] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.673506] Initialise system trusted keyrings [ 0.673975] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.685594] NFS: Registering the id_resolver key type [ 0.685677] Key type id_resolver registered [ 0.685695] Key type id_legacy registered [ 0.920155] Key type asymmetric registered [ 0.920195] Asymmetric key parser 'x509' registered [ 0.920315] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.920336] io scheduler mq-deadline registered [ 0.920353] io scheduler kyber registered [ 0.932062] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.932109] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.935936] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 21, base_baud = 5000000) is a IMX [ 1.598698] printk: console [ttymxc0] enabled [ 1.605078] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59, base_baud = 5000000) is a IMX [ 1.648902] imx_rngc 2284000.rng: Freescale RNGB registered (HW revision 2.129) [ 1.665755] random: fast init done [ 1.669774] random: crng init done [ 1.700240] brd: module loaded [ 1.718336] loop: module loaded [ 1.721947] at24 5-0050: supply vcc not found, using dummy regulator [ 1.733388] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.740394] at24 6-0050: supply vcc not found, using dummy regulator [ 1.751725] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.764092] libphy: Fixed MDIO Bus: probed [ 1.771269] pps pps0: new PPS source ptp0 [ 1.811514] libphy: fec_enet_mii_bus: probed [ 1.816772] fec 20b4000.ethernet ethFEC0: registered PHC device 0 [ 1.939377] pps pps1: new PPS source ptp1 [ 1.945936] libphy: fec_enet_mii_bus: probed [ 1.954654] fec 2188000.ethernet ethFEC1: registered PHC device 1 [ 1.961745] PPP generic driver version 2.4.2 [ 1.966432] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.973074] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.978846] usbcore: registered new interface driver usb-storage [ 1.985099] usbcore: registered new interface driver usbserial_generic [ 1.991763] usbserial: USB Serial support registered for generic [ 2.053055] rtc-pcf8563 4-0051: registered as rtc0 [ 2.069806] rtc-pcf8563 4-0051: setting system clock to 2024-11-29T12:25:42 UTC (1732883142) [ 2.088067] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc1 [ 2.094609] i2c /dev entries driver [ 2.101380] lm75 4-0048: supply vs not found, using dummy regulator [ 2.112987] lm75 4-0048: hwmon0: sensor 'lm75b' [ 2.233152] sdhci: Secure Digital Host Controller Interface driver [ 2.239434] sdhci: Copyright(c) Pierre Ossman [ 2.243805] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.257665] ledtrig-cpu: registered to indicate activity on CPUs [ 2.265462] usbcore: registered new interface driver usbhid [ 2.271164] usbhid: USB HID core driver [ 2.286208] Initializing XFRM netlink socket [ 2.290663] mmc0: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 2.299469] NET: Registered protocol family 10 [ 2.306617] Segment Routing with IPv6 [ 2.310744] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.318770] NET: Registered protocol family 17 [ 2.323884] Key type dns_resolver registered [ 2.332366] registered taskstats version 1 [ 2.336503] Loading compiled-in X.509 certificates [ 2.360177] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 2.372161] of_cfs_init [ 2.374854] of_cfs_init: OK [ 2.382592] ALSA device list: [ 2.385580] No soundcards found. [ 2.389488] Waiting for root device /dev/mmcblk0p3... [ 2.398178] mmc0: new DDR MMC card at address 0001 [ 2.403931] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 2.408994] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 2.415305] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 2.421652] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB, chardev (245:0) [ 2.432375] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.456035] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem [ 2.463446] EXT4-fs (mmcblk0p3): write access will be enabled during recovery [ 2.923224] EXT4-fs (mmcblk0p3): recovery complete [ 2.930462] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.939128] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 2.951618] devtmpfs: mounted [ 2.956280] Freeing unused kernel memory: 1024K [ 2.961175] Run /sbin/init as init process [ 3.404296] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 3.430024] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 3.470507] systemd[1]: Set hostname to . [ 5.103961] systemd[1]: Queued start job for default target Graphical Interface. [ 5.119460] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.161469] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.207289] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.256245] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.305170] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.339786] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password ts to Console Directory Watch. [ 5.379944] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Ruests to Wall Directory Watch. [ 5.420378] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.433425] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.470131] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.500424] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.540282] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.572172] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.610894] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 5.685981] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 5.695592] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.730338] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.771173] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.812404] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.850996] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 5.869947] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.892584] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 5.951485] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.010024] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 6.034077] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of stodes for the current kernel... [ 6.095999] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.160625] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.189889] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.214638] fuse: init (API version 7.32) [ 6.223494] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.298193] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.342636] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.399851] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.526771] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 6.590608] systemd[1]: Mounted /sys/kernel/config. [ OK ] Mounted /sys/kernel/config. [ 6.610442] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 6.662068] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st nodes for the current kernel. [ 6.765104] systemd[1]: modprobe@drm.service: Succeeded. [ 6.789168] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.811616] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.836959] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 6.888942] systemd[1]: Finished File System Check on Root Device. [ OK ] Finished File System Check on Root Device. [ 6.931914] systemd[1]: Finished Load Kernel Modules. [ OK ] Finished Load Kernel Modules. [ 6.950008] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ OK ] Mounted FUSE Control File System. [ 7.335397] EXT4-fs (mmcblk0p3): re-mounted. Opts: discard,errors=remount-ro [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Remount Root and Kernel File Systems. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Rule-based Managefor Device Events and Files... [ OK ] Finished Coldplug All udev Devices. Starting Helper to synchronize boot up for ifupdown... [ OK ] Started Rule-based Manager for Device Events and Files. [ 10.041129] Driver for 1-wire Dallas network protocol. [ 10.071427] gpio-68 (onewire_w1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 10.181952] gpio-11 (onewire_w2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 10.652966] fec 20b4000.ethernet eth1: renamed from ethFEC0 [ OK ] Found device /dev/ttymxc0. [ 11.783255] fec 2188000.ethernet eth0: renamed from ethFEC1 [ 11.803257] imx_usb 2184000.usb: No over current polarity defined [ 11.858906] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 11.863863] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 12.028855] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 12.089585] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 12.097875] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.105175] usb usb1: Product: EHCI Host Controller [ 12.110083] usb usb1: Manufacturer: Linux 5.10.35-wb172 ehci_hcd [ 12.116097] usb usb1: SerialNumber: ci_hdrc.0 [ 12.384049] hub 1-0:1.0: USB hub found [ 12.439309] hub 1-0:1.0: 1 port detected [ 12.540113] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 12.599165] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 12.688779] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 12.714654] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 12.723027] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.730298] usb usb2: Product: EHCI Host Controller [ 12.735185] usb usb2: Manufacturer: Linux 5.10.35-wb172 ehci_hcd [ 12.741217] usb usb2: SerialNumber: ci_hdrc.1 [ 12.868849] usb usb1-port1: over-current condition [ 13.069682] hub 2-0:1.0: USB hub found [ 13.113223] hub 2-0:1.0: 1 port detected [ 13.289185] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 13.478786] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 13.546422] usb 1-1: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00 [ 13.554705] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 13.561899] usb 1-1: Product: Disk 2.0 [ 13.565657] usb 1-1: Manufacturer: USB [ 13.569431] usb 1-1: SerialNumber: F9AAE716D1D542C1 [ 13.739452] usb 2-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 13.747680] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 13.837188] usb-storage 1-1:1.0: USB Mass Storage device detected [ 13.910411] hub 2-1:1.0: USB hub found [ 13.942239] scsi host0: usb-storage 1-1:1.0 [ 13.964152] hub 2-1:1.0: 4 ports detected [ 14.358780] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 14.540174] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00 [ 14.548582] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 14.555971] usb 2-1.1: Product: 802.11n WLAN Adapter [ 14.560969] usb 2-1.1: Manufacturer: Realtek [ 14.565246] usb 2-1.1: SerialNumber: 00e04c000001 [ 14.971077] scsi 0:0:0:0: Direct-Access USB Disk 2.0 8.07 PQ: 0 ANSI: 4 [ 15.003532] sd 0:0:0:0: [sda] 30433280 512-byte logical blocks: (15.6 GB/14.5 GiB) [ 15.034660] sd 0:0:0:0: [sda] Write Protect is off [ 15.063036] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 15.122566] sda: sda1 [ 15.137973] sd 0:0:0:0: [sda] Attached SCSI removable disk [ OK ] Found device /dev/mmcblk0p5. [ 15.478964] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 15.488642] Bluetooth: Core ver 2.22 [ 15.510100] NET: Registered protocol family 31 [ 15.514674] Bluetooth: HCI device and connection manager initialized [ 15.558507] Bluetooth: HCI socket layer initialized [ OK ] Found device /dev/mmcblk0p6. [ 15.576045] Bluetooth: L2CAP socket layer initialized [ 15.590079] Bluetooth: SCO socket layer initialized [ 15.703953] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 15.727153] usbcore: registered new interface driver btusb [ 15.736472] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 15.748339] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 15.754487] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 15.765936] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 15.772842] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 15.785714] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 15.843945] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 16.395723] RTL871X: module init start [ 16.399588] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ OK ] Listening on Load/Save RF itch Status /dev/rfkill Watch. [ 16.595728] RTL871X: rtw_ndev_init(wlan0) [ 16.602328] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 Activating swap /dev/mmcblk0p5... [ 16.623584] RTL871X: rtw_ndev_init(wlan1) [ 16.637232] usbcore: registered new interface driver rtl8723bu [ 16.643189] RTL871X: module init ret=0 Starting File System Check on /dev/mmcblk0p6... Starting Load/Save RF Kill Switch Status... [ 17.574109] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ 17.610912] usbcore: registered new interface driver rtl8xxxu [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Finished File System Check on /dev/mmcblk0p6. [ OK ] Reached target Swap. Mounting /mnt/data... [ OK ] Found device [ 18.765934] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard RTL8723BU 802.11b/g/n WLAN Adapter. [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. [ OK ] Started ifup for eth1. [ OK ] Started ifup for wlan0. Starting Flush Journal to Persistent Storage... Starting prepare mounts and symlinks to config files... [ 19.369291] systemd-journald[123]: Received client request to flush runtime journal. [ 19.437768] systemd-journald[123]: File /var/log/journal/5d2f1caf240e4238b9d1e1f30bf8d1ce/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onliata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onlit4 Metadata Check Snapshots... Starting Authorization Manager... Starting User Login Management... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ 24.360781] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.366230] Bluetooth: BNEP filters: protocol multicast [ 24.530634] Bluetooth: BNEP socket layer initialized [ OK ] Started Authorization Manager. [ OK ] Started Bluetooth service. [ OK ] Reached target Bluetooth. Starting Modem Manager... [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started WPA supplicant. Starting Hostname Service... [ OK ] Started User Login Management. [ OK ] Started Modem Manager. [ OK ] Started Hostname Service. [ OK ] Started Network Manager. Starting Network Manager Wait Online... Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ 32.111661] Micrel KSZ8081 or KSZ8091 2188000.ethernet-2:03: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet-2:03, irq=POLL) [ OK ] Finished Network Manager Wait Online. [FAILED] Failed to start Initializeen Board Device Tree overlays. See 'systemctl status wb-hwconf-manager.service' for details. [DEPEND] Dependency failed for MQTT Driver for ADC. [DEPEND] Dependency failed for MQTT for GPIO-controlled switches. Starting Raise network interfaces... [ OK ] Started Network connectionrvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Finished Remove Stale Onliext4 Metadata Check Snapshots. [ *] (2 of 3) A start job is running foretwork interfaces (43s / 5min 38s) [ INFO ] Skipped Power on GSM modem. [ 49.068886] SMSC LAN8710/LAN8720 2188000.ethernet-2:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet-2:00, irq=POLL) [ **] (2 of 2) A start job is running forr for Wiren Board (46s / no limit) [ ***] (2 of 2) A start job is running forr for Wiren Board (46s / no limit) [ *** ] (1 of 2) A start job is running foretwork interfaces (47s / 5min 38s) [ *** ] (1 of 2) A start job is running foretwork interfaces (47s / 5min 38s) [*** ] (1 of 2) A start job is running foretwork interfaces (48s / 5min 38s) [** ] (2 of 2) A start job is running forr for Wiren Board (48s / no limit) [* ] (2 of 2) A start job is running forr for Wiren Board (49s / no limit) [** ] (2 of 2) A start job is running forr for Wiren Board (49s / no limit) [*** ] (1 of 2) A start job is running foretwork interfaces (50s / 5min 38s) [ *** ] (1 of 2) A start job is running foretwork interfaces (50s / 5min 38s) [ *** ] (1 of 2) A start job is running foretwork interfaces (51s / 5min 38s) [ ***] (2 of 2) A start job is running forr for Wiren Board (51s / no limit) [ **] (2 of 2) A start job is running forr for Wiren Board (52s / no limit) [ *] (2 of 2) A start job is running forr for Wiren Board (52s / no limit) [ **] (1 of 2) A start job is running foretwork interfaces (53s / 5min 38s) [ ***] (1 of 2) A start job is running foretwork interfaces (53s / 5min 38s) [ *** ] (1 of 2) A start job is running foretwork interfaces (54s / 5min 38s) [ *** ] (2 of 2) A start job is running forr for Wiren Board (54s / no limit) [*** ] (2 of 2) A start job is running forr for Wiren Board (55s / no limit) [** ] (2 of 2) A start job is running forr for Wiren Board (55s / no limit) [* ] (1 of 2) A start job is running foretwork interfaces (56s / 5min 38s) [** ] (1 of 2) A start job is running foretwork interfaces (56s / 5min 38s) [*** ] (1 of 2) A start job is running foretwork interfaces (57s / 5min 38s) [ *** ] (2 of 2) A start job is running forr for Wiren Board (57s / no limit) [ *** ] (2 of 2) A start job is running forr for Wiren Board (58s / no limit) [ ***] (2 of 2) A start job is running forr for Wiren Board (58s / no limit) [ **] (1 of 2) A start job is running foretwork interfaces (59s / 5min 38s) [ *] (1 of 2) A start job is running foretwork interfaces (59s / 5min 38s) [ **] (1 of 2) A start job is running fortwork interfaces (1min / 5min 38s) [ ***] (2 of 2) A start job is running for for Wiren Board (1min / no limit) [ *** ] (2 of 2) A start job is running forr Wiren Board (1min 1s / no limit) [ *** ] (2 of 2) A start job is running forr Wiren Board (1min 1s / no limit) [*** ] (1 of 2) A start job is running forrk interfaces (1min 2s / 5min 38s) [** ] (1 of 2) A start job is running forrk interfaces (1min 2s / 5min 38s) [* ] (1 of 2) A start job is running forrk interfaces (1min 3s / 5min 38s) [** ] (2 of 2) A start job is running forr Wiren Board (1min 3s / no limit) [*** ] (2 of 2) A start job is running forr Wiren Board (1min 4s / no limit) [ *** ] (2 of 2) A start job is running forr Wiren Board (1min 4s / no limit) [ *** ] (1 of 2) A start job is running forrk interfaces (1min 5s / 5min 38s) [ ***] (1 of 2) A start job is running forrk interfaces (1min 5s / 5min 38s) [ **] (1 of 2) A start job is running forrk interfaces (1min 6s / 5min 38s) [ *] (2 of 2) A start job is running forr Wiren Board (1min 6s / no limit) [ **] (2 of 2) A start job is running forr Wiren Board (1min 7s / no limit) [ ***] (2 of 2) A start job is running forr Wiren Board (1min 7s / no limit) [ *** ] (1 of 2) A start job is running forrk interfaces (1min 8s / 5min 38s) [ *** ] (1 of 2) A start job is running forrk interfaces (1min 8s / 5min 38s) [*** ] (1 of 2) A start job is running forrk interfaces (1min 9s / 5min 38s) [** ] (2 of 2) A start job is running forr Wiren Board (1min 9s / no limit) [* ] (2 of 2) A start job is running for Wiren Board (1min 10s / no limit) [** ] (2 of 2) A start job is running for Wiren Board (1min 10s / no limit) [*** ] (1 of 2) A start job is running fork interfaces (1min 11s / 5min 38s) [ *** ] (1 of 2) A start job is running fork interfaces (1min 11s / 5min 38s) [ *** ] (1 of 2) A start job is running fork interfaces (1min 12s / 5min 38s) [ ***] (2 of 2) A start job is running for Wiren Board (1min 12s / no limit) [ **] (2 of 2) A start job is running for Wiren Board (1min 13s / no limit) [ *] (2 of 2) A start job is running for Wiren Board (1min 13s / no limit) [ **] (1 of 2) A start job is running fork interfaces (1min 14s / 5min 38s) [ ***] (1 of 2) A start job is running fork interfaces (1min 14s / 5min 38s) [ *** ] (1 of 2) A start job is running fork interfaces (1min 15s / 5min 38s) [ *** ] (2 of 2) A start job is running for Wiren Board (1min 15s / no limit) [*** ] (2 of 2) A start job is running for Wiren Board (1min 16s / no limit) [** ] (2 of 2) A start job is running for Wiren Board (1min 16s / no limit) [* ] (1 of 2) A start job is running fork interfaces (1min 17s / 5min 38s) [** ] (1 of 2) A start job is running fork interfaces (1min 17s / 5min 38s) [*** ] (1 of 2) A start job is running fork interfaces (1min 18s / 5min 38s) [ *** ] (2 of 2) A start job is running for Wiren Board (1min 18s / no limit) [ *** ] (2 of 2) A start job is running for Wiren Board (1min 19s / no limit) [ ***] (2 of 2) A start job is running for Wiren Board (1min 19s / no limit) [ **] (1 of 2) A start job is running fork interfaces (1min 20s / 5min 38s) [ *] (1 of 2) A start job is running fork interfaces (1min 20s / 5min 38s) [ **] (1 of 2) A start job is running fork interfaces (1min 21s / 5min 38s) [ ***] (2 of 2) A start job is running for Wiren Board (1min 21s / no limit) [ *** ] (2 of 2) A start job is running for Wiren Board (1min 22s / no limit) [ *** ] (2 of 2) A start job is running for Wiren Board (1min 22s / no limit) [*** ] (1 of 2) A start job is running fork interfaces (1min 23s / 5min 38s) [** ] (1 of 2) A start job is running fork interfaces (1min 23s / 5min 38s) [* ] (1 of 2) A start job is running fork interfaces (1min 24s / 5min 38s) [** ] (2 of 2) A start job is running for Wiren Board (1min 24s / no limit) [*** ] (2 of 2) A start job is running for Wiren Board (1min 25s / no limit) [ *** ] (2 of 2) A start job is running for Wiren Board (1min 25s / no limit) [ *** ] (1 of 2) A start job is running fork interfaces (1min 26s / 5min 38s) [ ***] (1 of 2) A start job is running fork interfaces (1min 26s / 5min 38s) [ **] (1 of 2) A start job is running fork interfaces (1min 27s / 5min 38s) [ *] (2 of 2) A start job is running for Wiren Board (1min 27s / no limit) [ **] (2 of 2) A start job is running for Wiren Board (1min 28s / no limit) [ ***] (2 of 2) A start job is running for Wiren Board (1min 28s / no limit) [ *** ] (1 of 2) A start job is running fork interfaces (1min 29s / 5min 38s) [ *** ] (1 of 2) A start job is running fork interfaces (1min 29s / 5min 38s) [*** ] (1 of 2) A start job is running fork interfaces (1min 30s / 5min 38s) [** ] (2 of 2) A start job is running for Wiren Board (1min 30s / no limit) [* ] (2 of 2) A start job is running for Wiren Board (1min 31s / no limit) [** ] (2 of 2) A start job is running for Wiren Board (1min 31s / no limit) [*** ] (1 of 2) A start job is running fork interfaces (1min 32s / 5min 38s) [ *** ] (1 of 2) A start job is running fork interfaces (1min 32s / 5min 38s) [ *** ] (1 of 2) A start job is running fork interfaces (1min 33s / 5min 38s) [ ***] (2 of 2) A start job is running for Wiren Board (1min 33s / no limit) [ **] (2 of 2) A start job is running for Wiren Board (1min 34s / no limit) [ *] (2 of 2) A start job is running for Wiren Board (1min 34s / no limit) [ **] (1 of 2) A start job is running fork interfaces (1min 35s / 5min 38s) [ ***] (1 of 2) A start job is running fork interfaces (1min 35s / 5min 38s) [ *** ] (1 of 2) A start job is running fork interfaces (1min 36s / 5min 38s) [ *** ] (2 of 2) A start job is running for Wiren Board (1min 36s / no limit) [*** ] (2 of 2) A start job is running for Wiren Board (1min 37s / no limit) [** ] (2 of 2) A start job is running for Wiren Board (1min 37s / no limit) [* ] (1 of 2) A start job is running fork interfaces (1min 38s / 5min 38s) [** ] (1 of 2) A start job is running fork interfaces (1min 38s / 5min 38s) [*** ] (1 of 2) A start job is running fork interfaces (1min 39s / 5min 38s) [ *** ] (2 of 2) A start job is running for Wiren Board (1min 39s / no limit) [ *** ] (2 of 2) A start job is running for Wiren Board (1min 40s / no limit) [ ***] (2 of 2) A start job is running for Wiren Board (1min 40s / no limit) [ **] (1 of 2) A start job is running fork interfaces (1min 41s / 5min 38s) [ *] (1 of 2) A start job is running fork interfaces (1min 41s / 5min 38s) [ **] (1 of 2) A start job is running fork interfaces (1min 42s / 5min 38s) [ ***] (2 of 2) A start job is running for Wiren Board (1min 42s / no limit) [ *** ] (2 of 2) A start job is running for Wiren Board (1min 43s / no limit) [ *** ] (2 of 2) A start job is running for Wiren Board (1min 43s / no limit) [*** ] (1 of 2) A start job is running fork interfaces (1min 44s / 5min 38s) [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A lightDHCP and caching DNS server... Starting Access point and rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [FAILED] Failed to start KNX Daemon. See 'systemctl status knxd.service' for details. [ OK ] Started Network Time Service. [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [ OK ] Finished Permit User Sessions. [FAILED] Failed to start KNXD Configurator for Wiren Board. See 'systemctl status wb-knxd-config.service' for details. [ OK ] Reached target Network is Online. [ OK ] Started Getty on tty1. Starting LSB: Brings up/down network automatically... [ OK ] Started Serial Getty on ttymxc0. [ OK ] Reached target Login Prompts. [ OK ] Stopped OpenBSD Secure Shell server. Starting OpenBSD Secure Shell server... Starting Compensation of se-tree (with opposite sign)... [ OK ] Started Mosquitto MQTT Broker. [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [ 113.192697] process '/usr/sbin/netplugd' started with executable stack [ OK ] Finished Compensation of sice-tree (with opposite sign). [ OK ] Stopped OpenBSD Secure Shell server. Starting OpenBSD Secure Shell server... Starting Wiren Board Cloud Agent (default)... [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost generating archive with data. [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. Starting Wiren Board MQTT to IEC 60870-5-104 gateway... [ OK ] Started Wiren Board MQTT KNX bridge. [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board MQTT to Modbus gateway. [ OK ] Started metrics sender.. [ OK ] Started Virtual MQTT devicr Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started MQTT Rule engine for Wiren Board. [ OK ] Started Wiren Board firmware update service. [ 116.002741] RTL871X: assoc success [ 116.006374] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ OK ] Started Access point and aserver for Wi-Fi and Ethernet. [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [FAILED] Failed to start Wiren BoarTT to IEC 60870-5-104 gateway. See 'systemctl status wb-mqtt-iec104.service' for details. [FAILED] Failed to start Wiren Board MQTT to OPC UA gateway. See 'systemctl status wb-mqtt-opcua.service' for details. Debian GNU/Linux 11 wirenboard-AWBLA7WC ttymxc0 wirenboard-AWBLA7WC login: root Password: cat: /var/lib/wirenboard/short_sn.conf: No such file or directory _ _ _ __ _(_)_ __ ___ _ __ | |__ ___ __ _ _ __ __| | \ \ /\ / / | '__/ _ \ '_ \| '_ \ / _ \ / _` | '__/ _` | \ V V /| | | | __/ | | | |_) | (_) | (_| | | | (_| | \_/\_/ |_|_| \___|_| |_|_.__/ \___/ \__,_|_| \__,_| Welcome to Wiren Board 6.7.2 (s/n ), release unstable.latest (as testing) Linux wirenboard-AWBLA7WC 5.10.35-wb172 #1 Wed Oct 16 09:17:25 UTC 2024 armv7l GNU/Linux System load: 6.37 2.12 0.77Up time: 2 min Memory usage: 16% of 494M Usage of /: 84% of 976M /mnt/data: 11% of 4.7G The following network interfaces were found in /etc/network/interfaces which means they are currently configured by ifupdown: - eth0 - eth1 - wlan0 If you want to manage those interfaces with NetworkManager instead remove their configuration from /etc/network/interfaces or use web interface config editor to remove them. 25 package updates are available; type 'apt update && apt upgrade' to update them. Last login: Fri Nov 29 11:13:56 UTC 2024 on ttymxc0 root@wirenboard-AWBLA7WC:~# [ 184.201888] systemd-journald[123]: Received SIGTERM from PID 3536 (watchdog). [ 184.966411] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 184.990600] systemd[1]: Detected architecture arm. [ 189.517363] EXT4-fs (mmcblk0p3): re-mounted. Opts: [ 277.199167] systemd[1]: Failed to deserialized tracked clients, ignoring: Transport endpoint is not connected [ 277.474910] systemd[1]: systemd-udevd.service: Succeeded. [ 277.494125] systemd[1]: systemd-udevd.service: Consumed 7.529s CPU time. [ 277.514869] systemd[1]: bluetooth.service: Succeeded. [ 277.534865] systemd[1]: cron.service: Succeeded. [ 277.555535] systemd[1]: dbus.service: Succeeded. [ 277.573372] systemd[1]: dbus.service: Consumed 3.084s CPU time. [ 277.598189] systemd[1]: polkit.service: Succeeded. [ 277.607298] systemd[1]: systemd-logind.service: Succeeded. [ 277.615362] systemd[1]: systemd-logind.service: Consumed 1.212s CPU time. [ 277.633000] systemd[1]: wb-configs.service: Succeeded. [ 277.661726] systemd[1]: avahi-daemon.service: Succeeded. [ 277.682054] systemd[1]: wpa_supplicant.service: Succeeded. [ 277.700038] systemd[1]: wpa_supplicant.service: Consumed 3.532s CPU time. [ 277.709876] systemd[1]: ModemManager.service: Succeeded. [ 277.722984] systemd[1]: NetworkManager.service: Succeeded. [ 277.731738] systemd[1]: NetworkManager.service: Consumed 2.646s CPU time. [ 277.744852] systemd[1]: ntp.service: Succeeded. [ 277.754670] systemd[1]: mosquitto.service: Succeeded. [ 277.767961] systemd[1]: getty@tty1.service: Succeeded. [ 277.780335] systemd[1]: serial-getty@ttymxc0.service: Succeeded. [ 277.788506] systemd[1]: serial-getty@ttymxc0.service: Consumed 1.242s CPU time. [ 277.798939] systemd[1]: wb-device-manager.service: Main process exited, code=killed, status=9/KILL [ 277.809422] systemd[1]: wb-device-manager.service: Failed with result 'signal'. [ 277.818946] systemd[1]: wb-device-manager.service: Consumed 2.021s CPU time. [ 277.828507] systemd[1]: wb-mqtt-confed.service: Succeeded. [ 277.839240] systemd[1]: wb-mqtt-logs.service: Succeeded. [ 277.849595] systemd[1]: wb-watch-update.service: Succeeded. [ 277.857296] systemd[1]: wb-watch-update.service: Consumed 2.275s CPU time. [ 277.872678] systemd[1]: hostapd.service: Succeeded. [ 277.887639] systemd[1]: user@0.service: Succeeded. [ 277.903402] systemd[1]: user@0.service: Consumed 1.671s CPU time. [ 277.920065] systemd[1]: wb-mqtt-w1.service: Succeeded. [ 277.936132] systemd[1]: wb-hwconf-manager.service: Main process exited, code=killed, status=15/TERM [ 277.960024] systemd[1]: wb-hwconf-manager.service: Failed with result 'signal'. [ 277.977037] systemd[1]: Failed to start Initialize Wiren Board Device Tree overlays. [ 277.985776] systemd[1]: wb-hwconf-manager.service: Consumed 4.427s CPU time. [ 277.999606] systemd[1]: wb-mqtt-metrics.service: Succeeded. [ 278.007247] systemd[1]: wb-mqtt-metrics.service: Consumed 1.218s CPU time. [ 278.015723] systemd[1]: wb-cloud-agent.service: Control process exited, code=killed, status=15/TERM [ 278.026448] systemd[1]: wb-cloud-agent.service: Failed with result 'signal'. [ 278.035712] systemd[1]: Failed to start Wiren Board Cloud Agent (default). [ 278.064081] systemd[1]: Received SIGTERM from PID 3536 (watchdog). [ 278.100639] systemd[1]: Reexecuting. [ 278.300670] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 278.324623] systemd[1]: Detected architecture arm. [ 281.157342] systemd[1]: dnsmasq.service: Succeeded. [ 281.182530] systemd[1]: wb-device-manager.service: Scheduled restart job, restart counter is at 1. [ 281.194979] systemd[1]: wb-mqtt-logs.service: Scheduled restart job, restart counter is at 1. [ 281.206879] systemd[1]: serial-getty@ttymxc0.service: Scheduled restart job, restart counter is at 1. [ 281.219554] systemd[1]: getty@tty1.service: Scheduled restart job, restart counter is at 1. [ 281.231364] systemd[1]: systemd-logind.service: Scheduled restart job, restart counter is at 1. [ 281.240707] systemd[1]: systemd-udevd.service: Scheduled restart job, restart counter is at 1. [ 281.253117] systemd[1]: knxd.service: Scheduled restart job, restart counter is at 7. [ 281.264356] systemd[1]: wb-cloud-agent-telegraf.service: Scheduled restart job, restart counter is at 4. [ 281.277079] systemd[1]: wb-cloud-agent-frpc.service: Scheduled restart job, restart counter is at 4. [ 281.286571] systemd[1]: mnt-sdcard.automount: Got hangup/error on autofs pipe from kernel. Likely our automount point has been unmounted by someone or something else? [ 281.301742] systemd[1]: mnt-sdcard.automount: Failed with result 'unmounted'. [ 281.312468] systemd[1]: wb-mqtt-mbgate.service: Scheduled restart job, restart counter is at 7. [ 281.324228] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 281.367598] systemd[1]: Mounting /mnt/data... [ 281.392162] systemd[1]: Started D-Bus System Message Bus. [ 281.480994] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ 281.504993] systemd[1]: Stopped Getty on tty1. [ 281.530173] systemd[1]: Started Getty on tty1. [ 281.541474] systemd[1]: Stopped KNX Daemon. [ 281.578729] systemd[1]: Starting KNX Daemon... [ 281.599174] systemd[1]: Stopped Serial Getty on ttymxc0. [ 281.622041] systemd[1]: Started Serial Getty on ttymxc0. [ 281.639341] systemd[1]: Stopping Flush Journal to Persistent Storage... [ 281.669325] systemd[1]: Stopped User Login Management. [ 281.702902] systemd[1]: Starting Load Kernel Module drm... [ 281.731506] systemd[1]: Stopped Rule-based Manager for Device Events and Files. [ 281.774256] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 281.801635] systemd[1]: Stopped telegraf metric sender for Wiren Board Cloud (default). [ 281.829333] systemd[1]: Starting telegraf metric sender for Wiren Board Cloud (default)... [ 281.861589] systemd[1]: Stopped telegraf metric sender for Wiren Board Cloud (default). [ 281.891630] systemd[1]: Starting telegraf metric sender for Wiren Board Cloud (default)... [ 281.919424] systemd[1]: Stopped Wiren Board modbus devices manager. [ 281.945777] systemd[1]: Started one-click diagnostic data collector for Wiren Board, generating archive with data. [ 281.982947] systemd[1]: Stopped Wiren Board journald to MQTT gateway. [ 282.030784] systemd[1]: Started Wiren Board journald to MQTT gateway. [ 282.080510] systemd[1]: Stopped Wiren Board MQTT to Modbus gateway. [ 282.123791] systemd[1]: Started Wiren Board MQTT to Modbus gateway. [ 282.199854] systemd[1]: Started MQTT Driver for serial devices. [ 282.282296] systemd[1]: Started Wiren Board modbus devices manager. [ 282.389737] systemd[1]: Started MQTT Rule engine for Wiren Board. [ 282.537283] systemd[1]: Mounted /mnt/data. [ 282.580084] systemd[1]: knxd.service: Main process exited, code=exited, status=2/INVALIDARGUMENT [ 282.660160] systemd[1]: knxd.service: Failed with result 'exit-code'. [ 282.740787] systemd[1]: Failed to start KNX Daemon. [ 282.799267] systemd[1]: systemd-journal-flush.service: Succeeded. [ 282.840323] systemd[1]: Stopped Flush Journal to Persistent Storage. [ 282.874237] systemd[1]: modprobe@drm.service: Succeeded. [ 282.934513] systemd[1]: Finished Load Kernel Module drm. [ 282.980062] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 283.039814] systemd[1]: Started telegraf metric sender for Wiren Board Cloud (default). [ 283.134716] systemd[1]: Started telegraf metric sender for Wiren Board Cloud (default). [ 283.193878] systemd[1]: wb-mqtt-logs.service: Main process exited, code=killed, status=6/ABRT [ 283.260324] systemd[1]: wb-mqtt-logs.service: Failed with result 'signal'. [ 283.303317] systemd[1]: wb-mqtt-mbgate.service: Main process exited, code=exited, status=1/FAILURE [ 283.387781] systemd[1]: wb-mqtt-mbgate.service: Failed with result 'exit-code'. [ 283.440789] systemd[1]: wb-rules.service: Main process exited, code=exited, status=1/FAILURE [ 283.500244] systemd[1]: wb-rules.service: Failed with result 'exit-code'. [ 283.552733] systemd[1]: wb-cloud-agent-frpc.service: Succeeded. [ 283.612009] systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway. [ 283.709324] systemd[1]: Mounting /var/log... [ 283.744806] systemd[1]: Stopped Journal Service. [ 283.843408] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 283.944018] systemd[1]: Starting Journal Service... [ 284.091442] systemd[1]: Starting User Login Management... [ 284.222976] systemd[1]: wb-cloud-agent-telegraf.service: Main process exited, code=exited, status=1/FAILURE [ 284.290119] systemd[1]: wb-cloud-agent-telegraf.service: Failed with result 'exit-code'. [ 284.352100] systemd[1]: Mounted /var/log. [ 284.410807] systemd[1]: wb-mqtt-logs.service: Scheduled restart job, restart counter is at 2. [ 284.467505] systemd[1]: Stopped Wiren Board journald to MQTT gateway. [ 284.569993] systemd[1]: Started Wiren Board journald to MQTT gateway. [ 284.638515] systemd[1]: wb-rules.service: Scheduled restart job, restart counter is at 4. [ 284.720861] systemd[1]: Stopped MQTT Rule engine for Wiren Board. [ 284.817744] systemd[1]: Starting Initialize Wiren Board Device Tree overlays... [ 285.834822] systemd[1]: Started Journal Service. [ 286.408611] systemd-journald[4609]: Received client request to flush runtime journal. Debian GNU/Linux 11 wirenboard-AWBLA7WC ttymxc0 wirenboard-AWBLA7WC login: