All services (2023-11-18T05:17:01.868Z - 2023-11-18T04:36:28.162Z)

2023-11-18T05:17:01.868Z [cron] pam_unix(cron:session): session closed for user root
2023-11-18T05:17:01.837Z [cron] (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
2023-11-18T05:17:01.810Z [cron] pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
2023-11-18T05:16:11.655Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 8 of device modbus:35: Serial protocol error: request timed out
2023-11-18T05:16:06.889Z [NetworkManager] <info>  [1700284566.8873] dhcp4 (eth0): state changed new lease, address=192.168.10.121
2023-11-18T05:14:05.477Z [wb-mqtt-serial] WARNING: [modbus] failed to read 16 input(s) @ 250 of device modbus:35: Serial protocol error: request timed out
2023-11-18T05:13:32.493Z [wb-mqtt-serial] WARNING: [modbus] failed to read 16 input(s) @ 250 of device modbus:35: Serial protocol error: request timed out
2023-11-18T05:13:22.830Z [wb-mqtt-serial] WARNING: [modbus] failed to read 2 input(s) @ 270 of device modbus:35: Serial protocol error: request timed out
2023-11-18T05:11:06.876Z [NetworkManager] <info>  [1700284266.8726] dhcp4 (eth0): state changed new lease, address=192.168.10.121
2023-11-18T05:08:13.882Z [wb-mqtt-serial] WARNING: [modbus] failed to read 16 input(s) @ 250 of device modbus:102: Serial protocol error: request timed out
2023-11-18T05:08:13.882Z [wb-mqtt-serial] WARNING: [modbus] failed to read 16 input(s) @ 250 of device modbus:102: Serial protocol error: request timed out
2023-11-18T05:06:06.871Z [NetworkManager] <info>  [1700283966.8689] dhcp4 (eth0): state changed new lease, address=192.168.10.121
2023-11-18T05:05:25.477Z [wb-mqtt-serial] WARNING: [modbus] failed to read 16 input(s) @ 250 of device modbus:153: Serial protocol error: request timed out
2023-11-18T05:05:25.446Z [wb-mqtt-serial] ERROR: [signal handling] sigwaitinfo error: Interrupted system call
2023-11-18T05:05:25.260Z [session-c1] Will run: fuser -k -CONT /dev/ttyRS485-1 /dev/ttyRS485-2

2023-11-18T05:05:25.256Z [session-c1] Has saved db to /var/lib/wb-mcu-fw-updater/devices.jsondb
2023-11-18T05:05:25.236Z [session-c1] 0 upgraded, 0 skipped upgrade, 0 stuck in bootloader, 0 disconnected and 4 too old for any updates.
2023-11-18T05:05:25.204Z [session-c1] 	WB-MSW v.3 (35, /dev/ttyRS485-1); WB-MRM2-mini-NO-inputs (153, /dev/ttyRS485-1); WB-MR6C (45, /dev/ttyRS485-1); WB-M1W2 BUTTONS (102, /dev/ttyRS485-1)
2023-11-18T05:05:25.203Z [session-c1] Too old for any updates:

2023-11-18T05:05:25.183Z [session-c1] WB-M1W2 BUTTONS (102, /dev/ttyRS485-1) is too old and does not support firmware updates!

2023-11-18T05:05:25.183Z [session-c1] WB-M1W2 BUTTONS (102, /dev/ttyRS485-1) is too old and does not support firmware updates!

2023-11-18T05:05:22.104Z [session-c1] 	WBM1W2 4264696954  3.9.0 53019
2023-11-18T05:05:21.762Z [session-c1] /dev/ttyRS485-1 102:
2023-11-18T05:05:18.454Z [session-c1] Probing WB-M1W2 BUTTONS (port: /dev/ttyRS485-1, slaveid: 102, uart_params: 9600N2, response_timeout: 0.50)...
2023-11-18T05:05:18.432Z [session-c1] WB-MR6C (45, /dev/ttyRS485-1) is too old and does not support firmware updates!
2023-11-18T05:05:15.352Z [session-c1] 	WBMR6 4264698270  1.8.3 55604
2023-11-18T05:05:14.984Z [session-c1] /dev/ttyRS485-1 45:
2023-11-18T05:05:11.658Z [session-c1] Probing WB-MR6C (port: /dev/ttyRS485-1, slaveid: 45, uart_params: 9600N2, response_timeout: 0.50)...
2023-11-18T05:05:11.641Z [session-c1] WB-MRM2-mini-NO-inputs (153, /dev/ttyRS485-1) is too old and does not support firmware updates!
2023-11-18T05:05:08.566Z [session-c1] 	WBMR2m 0  1.7.1 54242
2023-11-18T05:05:08.566Z [session-c1] 	WBMR2m 0  1.7.1 54242
2023-11-18T05:05:08.182Z [session-c1] /dev/ttyRS485-1 153:
2023-11-18T05:05:04.838Z [session-c1] Probing WB-MRM2-mini-NO-inputs (port: /dev/ttyRS485-1, slaveid: 153, uart_params: 9600N2, response_timeout: 0.50)...
2023-11-18T05:05:04.816Z [session-c1] WB-MSW v.3 (35, /dev/ttyRS485-1) is too old and does not support firmware updates!
2023-11-18T05:05:01.722Z [session-c1] 	WBMSW2 1103136  3.5.2 53287
2023-11-18T05:05:01.371Z [session-c1] /dev/ttyRS485-1 35:
2023-11-18T05:04:58.047Z [session-c1] Probing WB-MSW v.3 (port: /dev/ttyRS485-1, slaveid: 35, uart_params: 9600N2, response_timeout: 0.50)...
2023-11-18T05:04:58.029Z [session-c1] Will probe all devices on enabled serial ports of /etc/wb-mqtt-serial.conf:
2023-11-18T05:04:57.187Z [session-c1] GET: http://fw-releases.wirenboard.com/
2023-11-18T05:04:57.185Z [session-c1] 	defaultdict(<function parse_releases.<locals>.<lambda> at 0xa6022a48>, {'RELEASE_NAME': 'wb-2310', 'SUITE': 'stable', 'TARGET': 'wb6/bullseye', 'REPO_PREFIX': ''})
2023-11-18T05:04:57.185Z [session-c1] 	defaultdict(<function parse_releases.<locals>.<lambda> at 0xa6022a48>, {'RELEASE_NAME': 'wb-2310', 'SUITE': 'stable', 'TARGET': 'wb6/bullseye', 'REPO_PREFIX': ''})
2023-11-18T05:04:57.182Z [session-c1] Got releases info:
2023-11-18T05:04:57.179Z [session-c1] Reading /usr/lib/wb-release for releases info
2023-11-18T05:04:57.018Z [session-c1] Will run: fuser -k -STOP /dev/ttyRS485-1 /dev/ttyRS485-2

2023-11-18T05:04:56.939Z [session-c1] Will run: ps -o cmd= 21773
2023-11-18T05:04:56.936Z [session-c1] Clients of /dev/ttyRS485-1 /dev/ttyRS485-2: 21773
2023-11-18T05:04:56.770Z [session-c1] Will run: fuser /dev/ttyRS485-1 /dev/ttyRS485-2
2023-11-18T05:03:45.992Z [wb-mqtt-serial] WARNING: [modbus] failed to read 16 input(s) @ 250 of device modbus:35: Serial protocol error: request timed out
2023-11-18T05:01:21.202Z [wb-mqtt-serial] WARNING: [modbus] failed to read 16 input(s) @ 250 of device modbus:153: Serial protocol error: request timed out
2023-11-18T05:01:06.738Z [NetworkManager] <info>  [1700283666.7357] dhcp4 (eth0): state changed new lease, address=192.168.10.121
2023-11-18T05:01:06.738Z [NetworkManager] <info>  [1700283666.7357] dhcp4 (eth0): state changed new lease, address=192.168.10.121
2023-11-18T04:59:50.392Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 8 of device modbus:35: Serial protocol error: request timed out
2023-11-18T04:57:45.299Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 8 of device modbus:35: Serial protocol error: request timed out
2023-11-18T04:57:03.366Z [wb-mqtt-serial] WARNING: [modbus] failed to read 6 input(s) @ 32 of device modbus:45: Serial protocol error: request timed out
2023-11-18T04:56:39.730Z [wb-mqtt-serial] WARNING: [modbus] failed to read 2 input(s) @ 270 of device modbus:35: Serial protocol error: request timed out
2023-11-18T04:56:06.876Z [NetworkManager] <info>  [1700283366.8719] dhcp4 (eth0): state changed new lease, address=192.168.10.121
2023-11-18T04:55:57.532Z [mosquitto] 1700283357: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
2023-11-18T04:54:38.423Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 8 of device modbus:35: Serial protocol error: request timed out
2023-11-18T04:53:21.500Z [wb-mqtt-serial] WARNING: [modbus] failed to read 1 input(s) @ 3 of device modbus:35: Serial protocol error: request timed out
2023-11-18T04:51:06.895Z [NetworkManager] <info>  [1700283066.8910] dhcp4 (eth0): state changed new lease, address=192.168.10.121
2023-11-18T04:51:06.895Z [NetworkManager] <info>  [1700283066.8910] dhcp4 (eth0): state changed new lease, address=192.168.10.121
2023-11-18T04:50:12.097Z [wb-mqtt-serial] WARNING: [modbus] failed to read 1 input(s) @ 3 of device modbus:35: Serial protocol error: request timed out
2023-11-18T04:49:47.044Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 8 of device modbus:35: Serial protocol error: request timed out
2023-11-18T04:49:30.620Z [wb-mqtt-serial] WARNING: [modbus] failed to read 2 input(s) @ 0 of device modbus:35: Serial protocol error: request timed out
2023-11-18T04:48:13.665Z [wb-mqtt-serial] WARNING: [modbus] failed to read 2 input(s) @ 7 of device modbus:102: Serial protocol error: request timed out
2023-11-18T04:46:09.050Z [wb-mqtt-serial] WARNING: [modbus] failed to read 1 input(s) @ 121 of device modbus:153: Serial protocol error: malformed response: invalid crc
2023-11-18T04:46:09.025Z [wb-mqtt-serial] ERROR: [signal handling] sigwaitinfo error: Interrupted system call
2023-11-18T04:46:08.881Z [session-c1] Will run: fuser -k -CONT /dev/ttyRS485-1 /dev/ttyRS485-2

2023-11-18T04:46:08.878Z [session-c1] Has saved db to /var/lib/wb-mcu-fw-updater/devices.jsondb
2023-11-18T04:46:08.872Z [session-c1] 0 upgraded, 0 skipped upgrade, 0 stuck in bootloader, 0 disconnected and 4 too old for any updates.
2023-11-18T04:46:08.872Z [session-c1] 0 upgraded, 0 skipped upgrade, 0 stuck in bootloader, 0 disconnected and 4 too old for any updates.
2023-11-18T04:46:08.863Z [session-c1] 	WB-MR6C (45, /dev/ttyRS485-1); WB-MSW v.3 (35, /dev/ttyRS485-1); WB-M1W2 BUTTONS (102, /dev/ttyRS485-1); WB-MRM2-mini-NO-inputs (153, /dev/ttyRS485-1)
2023-11-18T04:46:08.859Z [session-c1] Too old for any updates:

2023-11-18T04:46:08.853Z [session-c1] WB-MRM2-mini-NO-inputs (153, /dev/ttyRS485-1) is too old and does not support firmware updates!
2023-11-18T04:46:06.838Z [NetworkManager] <info>  [1700282766.8289] dhcp4 (eth0): state changed new lease, address=192.168.10.121
2023-11-18T04:46:05.751Z [session-c1] 	WBMR2m 0  1.7.1 53127
2023-11-18T04:46:05.392Z [session-c1] /dev/ttyRS485-1 153:
2023-11-18T04:46:02.079Z [session-c1] Probing WB-MRM2-mini-NO-inputs (port: /dev/ttyRS485-1, slaveid: 153, uart_params: 9600N2, response_timeout: 0.50)...
2023-11-18T04:46:02.069Z [session-c1] WB-M1W2 BUTTONS (102, /dev/ttyRS485-1) is too old and does not support firmware updates!

2023-11-18T04:45:58.972Z [session-c1] 	WBM1W2 4264696954  3.9.0 51910
2023-11-18T04:45:58.972Z [session-c1] 	WBM1W2 4264696954  3.9.0 51910
2023-11-18T04:45:58.625Z [session-c1] /dev/ttyRS485-1 102:
2023-11-18T04:45:55.295Z [session-c1] Probing WB-M1W2 BUTTONS (port: /dev/ttyRS485-1, slaveid: 102, uart_params: 9600N2, response_timeout: 0.50)...
2023-11-18T04:45:55.282Z [session-c1] WB-MSW v.3 (35, /dev/ttyRS485-1) is too old and does not support firmware updates!
2023-11-18T04:45:52.204Z [session-c1] 	WBMSW2 1103136  3.5.2 52185
2023-11-18T04:45:51.842Z [session-c1] /dev/ttyRS485-1 35:
2023-11-18T04:45:48.534Z [session-c1] Probing WB-MSW v.3 (port: /dev/ttyRS485-1, slaveid: 35, uart_params: 9600N2, response_timeout: 0.50)...
2023-11-18T04:45:48.513Z [session-c1] WB-MR6C (45, /dev/ttyRS485-1) is too old and does not support firmware updates!
2023-11-18T04:45:45.951Z [session-c1] 	WBMR6 4264698270  1.8.3 54434
2023-11-18T04:45:45.068Z [session-c1] /dev/ttyRS485-1 45:
2023-11-18T04:45:45.068Z [session-c1] /dev/ttyRS485-1 45:
2023-11-18T04:45:41.739Z [session-c1] Probing WB-MR6C (port: /dev/ttyRS485-1, slaveid: 45, uart_params: 9600N2, response_timeout: 0.50)...
2023-11-18T04:45:41.727Z [session-c1] Will probe all devices on enabled serial ports of /etc/wb-mqtt-serial.conf:
2023-11-18T04:45:40.745Z [session-c1] GET: http://fw-releases.wirenboard.com/
2023-11-18T04:45:40.743Z [session-c1] 	defaultdict(<function parse_releases.<locals>.<lambda> at 0xa6072a48>, {'RELEASE_NAME': 'wb-2310', 'SUITE': 'stable', 'TARGET': 'wb6/bullseye', 'REPO_PREFIX': ''})
2023-11-18T04:45:40.740Z [session-c1] Got releases info:
2023-11-18T04:45:40.737Z [session-c1] Reading /usr/lib/wb-release for releases info
2023-11-18T04:45:40.575Z [session-c1] Will run: fuser -k -STOP /dev/ttyRS485-1 /dev/ttyRS485-2

2023-11-18T04:45:40.473Z [session-c1] Will run: ps -o cmd= 21773
2023-11-18T04:45:40.470Z [session-c1] Clients of /dev/ttyRS485-1 /dev/ttyRS485-2: 21773
2023-11-18T04:45:40.470Z [session-c1] Clients of /dev/ttyRS485-1 /dev/ttyRS485-2: 21773
2023-11-18T04:45:40.266Z [session-c1] Will run: fuser /dev/ttyRS485-1 /dev/ttyRS485-2
2023-11-18T04:45:02.000Z [init] Started Session c1 of user root.

2023-11-18T04:45:01.995Z [user@0] Startup finished in 2.267s.
2023-11-18T04:45:01.989Z [user@0] Reached target Main User Target.

2023-11-18T04:45:01.974Z [init] Started User Manager for UID 0.
2023-11-18T04:45:01.968Z [user@0] Reached target Basic System.
2023-11-18T04:45:01.959Z [user@0] Reached target Timers.
2023-11-18T04:45:01.958Z [user@0] Reached target Sockets.
2023-11-18T04:45:01.944Z [user@0] Reached target Paths.
2023-11-18T04:45:01.944Z [user@0] Reached target Paths.
2023-11-18T04:45:01.928Z [user@0] Queued start job for default target Main User Target.
2023-11-18T04:44:59.424Z [user@0] pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0)
2023-11-18T04:44:59.291Z [init] Starting User Manager for UID 0...
2023-11-18T04:44:59.263Z [init] Finished User Runtime Directory /run/user/0.
2023-11-18T04:44:59.163Z [systemd-logind] New session c1 of user root.
2023-11-18T04:44:59.104Z [init] Starting User Runtime Directory /run/user/0...
2023-11-18T04:44:59.058Z [init] Created slice User Slice of UID 0.
2023-11-18T04:44:58.904Z [ssh] pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)
2023-11-18T04:44:58.859Z [ssh] Accepted password for root from 192.168.10.145 port 50354 ssh2
2023-11-18T04:44:58.859Z [ssh] Accepted password for root from 192.168.10.145 port 50354 ssh2
2023-11-18T04:44:52.684Z [ssh] reprocess config line 37: Deprecated option RhostsRSAAuthentication
2023-11-18T04:44:52.657Z [ssh] reprocess config line 30: Deprecated option RSAAuthentication
2023-11-18T04:44:43.844Z [ssh] rexec line 37: Deprecated option RhostsRSAAuthentication

2023-11-18T04:44:43.843Z [ssh] rexec line 30: Deprecated option RSAAuthentication
2023-11-18T04:44:43.842Z [ssh] rexec line 19: Deprecated option ServerKeyBits
2023-11-18T04:44:43.841Z [ssh] rexec line 18: Deprecated option KeyRegenerationInterval

2023-11-18T04:44:43.826Z [ssh] rexec line 15: Deprecated option UsePrivilegeSeparation
2023-11-18T04:41:06.798Z [NetworkManager] <info>  [1700282466.7936] dhcp4 (eth0): state changed new lease, address=192.168.10.121
2023-11-18T04:37:18.233Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 8 of device modbus:35: Serial protocol error: request timed out
2023-11-18T04:37:18.233Z [wb-mqtt-serial] WARNING: [modbus] failed to read 3 input(s) @ 8 of device modbus:35: Serial protocol error: request timed out
2023-11-18T04:36:31.849Z [wb-mqtt-db] INFO: [sqlite] Creating channel wb-mr6c_45/FW Version
2023-11-18T04:36:31.329Z [wb-mqtt-serial] WARNING: [serial client] Failed to enable events for modbus:45: Serial protocol error: request timed out
2023-11-18T04:36:31.270Z [wb-mqtt-serial] INFO: [serial device] device modbus:45 is connected
2023-11-18T04:36:31.270Z [wb-mqtt-serial] INFO: [modbus] Init: disable legacy input mode control: setup register <modbus:45:holding: 5> <-- 0 (0x0)
2023-11-18T04:36:31.241Z [wb-mqtt-serial] WARNING: [modbus] Continuous read is not enabled [slave_id is 45]
2023-11-18T04:36:31.077Z [wb-mqtt-serial] INFO: [serial device] device modbus:35 is connected
2023-11-18T04:36:31.077Z [wb-mqtt-serial] INFO: [modbus] Init: CO₂ Sensor Enabled: setup register <modbus:35:coil: 3> <-- 1 (0x1)
2023-11-18T04:36:31.049Z [wb-mqtt-serial] INFO: [modbus] Init: CO₂ Baseline Calibration: setup register <modbus:35:holding: 95> <-- 1 (0x1)
2023-11-18T04:36:31.021Z [wb-mqtt-serial] WARNING: [modbus] Continuous read is not enabled [slave_id is 35]
2023-11-18T04:36:31.021Z [wb-mqtt-serial] WARNING: [modbus] Continuous read is not enabled [slave_id is 35]
2023-11-18T04:36:30.785Z [wb-mqtt-serial] WARNING: [serial client] Failed to enable events for modbus:153: Serial protocol error: request timed out
2023-11-18T04:36:30.731Z [wb-mqtt-serial] INFO: [serial device] device modbus:153 is connected
2023-11-18T04:36:30.731Z [wb-mqtt-serial] INFO: [modbus] Init: disable legacy input mode control: setup register <modbus:153:holding: 5> <-- 0 (0x0)
2023-11-18T04:36:30.701Z [wb-mqtt-serial] WARNING: [modbus] Continuous read is not enabled [slave_id is 153]
2023-11-18T04:36:29.315Z [wb-mqtt-serial] INFO: [serial device] device modbus:102 is connected
2023-11-18T04:36:29.315Z [wb-mqtt-serial] WARNING: [modbus] failed to write: <modbus:102:holding: 276>: Serial protocol error: illegal data value
2023-11-18T04:36:29.292Z [wb-mqtt-serial] WARNING: [modbus] failed to write: <modbus:102:holding: 275>: Serial protocol error: illegal data value
2023-11-18T04:36:29.266Z [wb-mqtt-serial] WARNING: [modbus] Continuous read is not enabled [slave_id is 102]
2023-11-18T04:36:29.250Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 312)
2023-11-18T04:36:29.250Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 312)
2023-11-18T04:36:29.242Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 310)
2023-11-18T04:36:28.897Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 306)
2023-11-18T04:36:28.873Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 305)
2023-11-18T04:36:28.860Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 292)
2023-11-18T04:36:28.855Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 285)
2023-11-18T04:36:28.848Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 278)
2023-11-18T04:36:28.845Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 271)
2023-11-18T04:36:28.842Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 264)
2023-11-18T04:36:28.840Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 257)
2023-11-18T04:36:28.840Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 257)
2023-11-18T04:36:28.703Z [wb-rules] ERROR: [rule error] failed to SetValue for unexisting control wb-mr6c_45/K2: false
2023-11-18T04:36:28.695Z [wb-rules] ERROR: [rule error] failed to SetValue for unexisting control wb-mr6c_45/K3: false
2023-11-18T04:36:28.632Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 160)
2023-11-18T04:36:28.608Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 159)
2023-11-18T04:36:28.599Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 140)
2023-11-18T04:36:28.489Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 97)
2023-11-18T04:36:28.475Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 96)
2023-11-18T04:36:28.472Z [wb-rules] ERROR: [rule error] failed to SetValue for unexisting control wb-mr6c_45/K4: false
2023-11-18T04:36:28.459Z [wb-rules] ERROR: [rule error] failed to SetValue for unexisting control wb-mr6c_45/K5: true
2023-11-18T04:36:28.459Z [wb-rules] ERROR: [rule error] failed to SetValue for unexisting control wb-mr6c_45/K5: true
2023-11-18T04:36:28.298Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 59)
2023-11-18T04:36:28.288Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 58)
2023-11-18T04:36:28.275Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 45)
2023-11-18T04:36:28.262Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 38)
2023-11-18T04:36:28.174Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 2)
2023-11-18T04:36:28.174Z [wb-mqtt-serial] INFO: [mqtt] subscription succeeded (message id 1)
2023-11-18T04:36:28.171Z [wb-mqtt-serial] INFO: [mqtt] connection estabilished with code "0" <success>
2023-11-18T04:36:28.166Z [mosquitto] 1700282188: New client connected from /var/run/mosquitto/mosquitto.sock:0 as wb-modbus (p2, c0, k60).
2023-11-18T04:36:28.162Z [mosquitto] 1700282188: New connection from /var/run/mosquitto/mosquitto.sock:0 on port 0.