Debian GNU/Linux 11 wirenboard-A7J3KV5 ttyS0 wirenboard-A7J3KV5 login: [ 35.703302] vcc-gmac-phy: disabling [ 35.707233] dc5ldo: disabling [ 35.713313] dldo4: disabling [ 35.723336] usb0_vbus: disabling [ 35.726618] errwb73002-disable-can: disabling [ 66.984878] systemd-journald[138]: Received SIGTERM from PID 2454 (watchdog). [ 67.295715] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +G NUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 defa ult-hierarchy=unified) [ 67.320434] systemd[1]: Detected architecture arm. [ 72.233083] EXT4-fs (mmcblk0p2): re-mounted. Opts: U-Boot SPL 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) DRAM: 1024 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 6 ms (52.7 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6479608 bytes read in 182 ms (34 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard730 56075 bytes read in 10 ms (5.3 MiB/s) 254 bytes read in 3 ms (82 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x62def8 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK ## DT property 'device-serial' not found! If the device was produced before 2023-08-07, please ignore it Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb153 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Oct 26 10:17:53 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.3.0 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x7ec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1004496K/1048576K available (10240K kernel code, 1478K rwdata, 3228K rodata, 1024K init, 306K bss, 27696K reserved, 16384K cma-reserved, 245748K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31877 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000029] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000088] Switching to timer-based delay loop, resolution 41ns [ 0.001024] Console: colour dummy device 80x30 [ 0.001160] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.001220] pid_max: default: 32768 minimum: 301 [ 0.001665] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001713] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003339] CPU: Testing write buffer coherency: ok [ 0.003830] /cpus/cpu@0 missing clock-frequency property [ 0.003881] /cpus/cpu@1 missing clock-frequency property [ 0.003930] /cpus/cpu@2 missing clock-frequency property [ 0.003983] /cpus/cpu@3 missing clock-frequency property [ 0.004002] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006335] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.006777] rcu: Hierarchical SRCU implementation. [ 0.008173] smp: Bringing up secondary CPUs ... [ 0.019534] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.030975] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.042241] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.042447] smp: Brought up 1 node, 4 CPUs [ 0.042488] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.042502] CPU: All CPU(s) started in HYP mode. [ 0.042515] CPU: Virtualization extensions available. [ 0.044737] devtmpfs: initialized [ 0.066884] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.067400] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.067458] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.068768] pinctrl core: initialized pinctrl subsystem [ 0.071073] NET: Registered protocol family 16 [ 0.075186] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.077949] thermal_sys: Registered thermal governor 'step_wise' [ 0.078709] No ATAGs? [ 0.079026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.079048] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.167871] SCSI subsystem initialized [ 0.168168] usbcore: registered new interface driver usbfs [ 0.168236] usbcore: registered new interface driver hub [ 0.168313] usbcore: registered new device driver usb [ 0.169657] mc: Linux media interface: v0.10 [ 0.169814] videodev: Linux video capture interface: v2.00 [ 0.170057] pps_core: LinuxPPS API ver. 1 registered [ 0.170099] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.170173] PTP clock support registered [ 0.170792] Advanced Linux Sound Architecture Driver Initialized. [ 0.172443] clocksource: Switched to clocksource arch_sys_counter [ 1.335948] NET: Registered protocol family 2 [ 1.336979] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.337039] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.337130] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.337263] TCP: Hash tables configured (established 8192 bind 8192) [ 1.337930] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.338154] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.338811] NET: Registered protocol family 1 [ 1.340190] RPC: Registered named UNIX socket transport module. [ 1.340226] RPC: Registered udp transport module. [ 1.340247] RPC: Registered tcp transport module. [ 1.340267] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.342276] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.345871] Initialise system trusted keyrings [ 1.346260] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.361571] NFS: Registering the id_resolver key type [ 1.361676] Key type id_resolver registered [ 1.361700] Key type id_legacy registered [ 1.537020] Key type asymmetric registered [ 1.537056] Asymmetric key parser 'x509' registered [ 1.537280] bounce: pool size: 64 pages [ 1.537375] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.537399] io scheduler mq-deadline registered [ 1.537418] io scheduler kyber registered [ 1.538791] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.598589] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.624232] brd: module loaded [ 1.642202] loop: module loaded [ 1.661290] libphy: Fixed MDIO Bus: probed [ 1.663415] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.664190] libphy: sun4i_mii_bus: probed [ 1.668130] CAN device driver interface [ 1.671482] PPP generic driver version 2.4.2 [ 1.672121] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.672161] ehci-platform: EHCI generic platform driver [ 1.674007] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.674056] ohci-platform: OHCI generic platform driver [ 1.675388] usbcore: registered new interface driver usb-storage [ 1.675512] usbcore: registered new interface driver usbserial_generic [ 1.675556] usbserial: USB Serial support registered for generic [ 1.679794] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 1.679821] sun6i-rtc 1c20400.rtc: RTC enabled [ 1.680318] i2c /dev entries driver [ 1.691671] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.697125] ledtrig-cpu: registered to indicate activity on CPUs [ 1.698098] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.699266] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.700178] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.700537] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.700860] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.701094] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 1.701390] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 1.701644] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 1.701880] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 1.702133] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 1.705842] usbcore: registered new interface driver usbhid [ 1.705875] usbhid: USB HID core driver [ 1.710342] iio-rescale a1-volt: using raw+scale source channel [ 1.711107] iio-rescale a2-volt: using raw+scale source channel [ 1.711686] iio-rescale a3-volt: using raw+scale source channel [ 1.712156] iio-rescale vin-volt: using raw+scale source channel [ 1.717270] Initializing XFRM netlink socket [ 1.718180] NET: Registered protocol family 10 [ 1.719423] Segment Routing with IPv6 [ 1.719556] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.721767] NET: Registered protocol family 17 [ 1.721822] can: controller area network core [ 1.722001] NET: Registered protocol family 29 [ 1.722028] can: raw protocol [ 1.722053] can: broadcast manager protocol [ 1.722089] can: netlink gateway - max_hops=1 [ 1.722920] Key type dns_resolver registered [ 1.723039] Registering SWP/SWPB emulation handler [ 1.723188] registered taskstats version 1 [ 1.723266] Loading compiled-in X.509 certificates [ 1.759294] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.767009] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.767976] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.774385] printk: console [ttyS0] disabled [ 1.775194] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 52, base_baud = 1500000) is a Allwinner sun4i [ 2.742577] printk: console [ttyS0] enabled [ 2.749086] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.755950] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.762600] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.769928] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.780684] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.789164] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PG regulator [ 2.796157] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 202 [ 2.802855] sun4i-pinctrl 1c20800.pinctrl: pin-202 (1c29000.serial) status -517 [ 2.810178] sun4i-pinctrl 1c20800.pinctrl: could not request pin 202 (PG10) from group PG10 on device 1c20800.pinctrl [ 2.820890] dw-apb-uart 1c29000.serial: Error applying setting, reverse things back [ 2.830436] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.838643] libphy: sun4i_mii_bus: probed [ 2.843926] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.850770] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.857494] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.868657] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.875516] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.882138] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.889708] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.900311] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.909009] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.916088] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.922628] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.929955] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.940325] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.969339] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.986284] vcc-3v3: supplied by regulator-dummy [ 2.991925] vdd-cpu: supplied by regulator-dummy [ 2.997996] vdd-sys: supplied by regulator-dummy [ 3.004601] dcdc4: supplied by regulator-dummy [ 3.010882] vcc-dram: supplied by regulator-dummy [ 3.016026] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 3.023108] vcc-gmac-phy: supplied by vcc-3v3 [ 3.028879] dc5ldo: supplied by vcc-dram [ 3.033575] tv: Bringing 700000uV into 3300000-3300000uV [ 3.039672] tv: supplied by regulator-dummy [ 3.044623] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 3.051056] aldo2: supplied by regulator-dummy [ 3.057058] avcc-pll: supplied by regulator-dummy [ 3.062812] eldo1: supplied by regulator-dummy [ 3.068311] eldo2: supplied by regulator-dummy [ 3.073475] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 3.081444] vcc-pe: supplied by regulator-dummy [ 3.087050] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 3.094300] vcc-sd-alt: supplied by regulator-dummy [ 3.100254] dldo2: supplied by regulator-dummy [ 3.105875] dldo3: supplied by regulator-dummy [ 3.111385] dldo4: supplied by regulator-dummy [ 3.116554] rtc_ldo: supplied by regulator-dummy [ 3.122211] ldo_io0: supplied by regulator-dummy [ 3.127863] ldo_io1: supplied by regulator-dummy [ 3.143228] axp20x-adc axp22x-adc: DMA mask not set [ 3.159933] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 3.170279] axp20x-i2c 0-0034: AXP20X driver loaded [ 3.191286] random: fast init done [ 3.215823] rtc-pcf85063 2-0051: registered as rtc0 [ 3.230183] rtc-pcf85063 2-0051: setting system clock to 2023-11-13T13:58:54 UTC (1699883934) [ 3.248506] lm75 2-0048: supply vs not found, using dummy regulator [ 3.260706] lm75 2-0048: hwmon1: sensor 'lm75b' [ 3.305611] at24 3-0050: supply vcc not found, using dummy regulator [ 3.313575] at24 3-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 3.324854] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 3.331314] i2c-gpio i2c_eeprom1: using lines 48 (SDA) and 49 (SCL) [ 3.345444] at24 4-0050: supply vcc not found, using dummy regulator [ 3.353449] at24 4-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 3.371256] i2c-gpio i2c_eeprom2: using lines 46 (SDA) and 47 (SCL) [ 3.377935] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 3.385721] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 3.396823] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 54, base_baud = 1500000) is a Allwinner sun4i [ 3.407114] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 3.415121] libphy: sun4i_mii_bus: probed [ 3.466622] mmc0: new DDR MMC card at address 0001 [ 3.472322] mmcblk0: mmc0:0001 DG4008 7.28 GiB [ 3.477401] mmcblk0boot0: mmc0:0001 DG4008 partition 1 4.00 MiB [ 3.483829] mmcblk0boot1: mmc0:0001 DG4008 partition 2 4.00 MiB [ 3.490084] mmcblk0rpmb: mmc0:0001 DG4008 partition 3 4.00 MiB, chardev (246:0) [ 3.507449] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 3.558697] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: e8:eb:1b:35:44:f1 [ 3.567964] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 3.574358] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 3.583256] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 3.589401] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 3.596652] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 3.603894] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 3.608857] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 3.615653] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 3.621310] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 3.627627] libphy: stmmac: probed [ 3.884957] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.890569] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.898770] ehci-platform 1c14000.usb: irq 37, io mem 0x01c14000 [ 3.932440] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.939519] hub 1-0:1.0: USB hub found [ 3.943380] hub 1-0:1.0: 1 port detected [ 3.948530] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.954173] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.962161] ehci-platform 1c19000.usb: irq 39, io mem 0x01c19000 [ 3.992439] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.999439] hub 2-0:1.0: USB hub found [ 4.003282] hub 2-0:1.0: 1 port detected [ 4.008356] ehci-platform 1c1c000.usb: EHCI Host Controller [ 4.013978] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 4.021937] ehci-platform 1c1c000.usb: irq 41, io mem 0x01c1c000 [ 4.052860] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 4.059818] hub 3-0:1.0: USB hub found [ 4.063645] hub 3-0:1.0: 1 port detected [ 4.372458] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.972529] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 4.979172] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 4.987177] ohci-platform 1c14400.usb: irq 38, io mem 0x01c14400 [ 5.067372] hub 4-0:1.0: USB hub found [ 5.071195] hub 4-0:1.0: 1 port detected [ 5.076423] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 5.083091] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 5.091009] ohci-platform 1c19400.usb: irq 40, io mem 0x01c19400 [ 5.167326] hub 5-0:1.0: USB hub found [ 5.171134] hub 5-0:1.0: 1 port detected [ 5.176250] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 5.182913] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 5.190853] ohci-platform 1c1c400.usb: irq 42, io mem 0x01c1c400 [ 5.267326] hub 6-0:1.0: USB hub found [ 5.271167] hub 6-0:1.0: 1 port detected [ 5.276917] of_cfs_init [ 5.279503] of_cfs_init: OK [ 5.286992] ALSA device list: [ 5.289973] No soundcards found. [ 5.303688] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 5.324470] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.332734] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 5.343053] devtmpfs: mounted [ 5.350870] Freeing unused kernel memory: 1024K [ 5.392750] Run /sbin/init as init process [ 5.408000] mmc1: host does not support reading read-only switch, assuming write-enable [ 5.418873] mmc1: new ultra high speed SDR104 SDXC card at address 0001 [ 5.426450] mmcblk1: mmc1:0001 USD 59.5 GiB [ 5.432717] mmcblk1: p1 [ 5.677040] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 5.701290] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 5.743446] systemd[1]: Set hostname to . [ 6.514459] systemd[1]: Queued start job for default target Graphical Interface. [ 6.523913] random: systemd: uninitialized urandom read (16 bytes read) [ 6.534850] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 6.572744] random: systemd: uninitialized urandom read (16 bytes read) [ 6.581309] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 6.622644] random: systemd: uninitialized urandom read (16 bytes read) [ 6.631343] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 6.674425] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 6.714147] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 6.753115] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 6.793075] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 6.833015] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 6.845022] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 6.883096] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 6.922638] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 6.953810] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 6.993109] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 7.043695] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 7.052940] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 7.093559] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 7.127070] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 7.163386] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 7.203509] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 7.217763] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 7.258538] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 7.298680] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 7.339280] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 7.380819] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 7.429514] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 7.469490] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 7.496923] fuse: init (API version 7.32) [ 7.505445] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 7.521619] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 7.575802] systemd[1]: Starting Journal Service... Starting Journal Service... [ 7.595468] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 7.609762] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 7.631421] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 7.639127] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 7.650306] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System 7.662063] systemd[1]: Mounted Kernel Trace File System. m. [ OK ] Mounted Kernel Trace File System 7.674650] systemd[1]: Finished Create list of static device nodes for the current kernel. m. [ OK ] Finished Create list of st… nodes for the current kernel. [ 7.767011] systemd[1]: modprobe@drm.service: Succeeded. [ 7.774236] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 7.814552] systemd[1]: modprobe@fuse.service: Succeeded. [ 7.821697] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 7.863434] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 8.108501] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Manage…for Device Events and Files... [ OK ] Started Rule-based Manager for Device Events and Files. [ 9.154978] Driver for 1-wire Dallas network protocol. [ 9.375695] usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, using dummy regulator [ 9.623068] Bluetooth: Core ver 2.22 [ 9.626783] NET: Registered protocol family 31 [ 9.631245] Bluetooth: HCI device and connection manager initialized [ 9.637779] Bluetooth: HCI socket layer initialized [ 9.642729] Bluetooth: L2CAP socket layer initialized [ 9.647842] Bluetooth: SCO socket layer initialized [ 9.674133] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.727440] usbcore: registered new interface driver btusb [ 9.745523] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 9.755537] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 9.761583] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 9.775630] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 9.782129] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 9.791452] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 9.807967] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.826762] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ OK ] Found device /dev/mmcblk0p6. [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/ttyS0. [ 10.353410] RTL871X: module init start [ 10.357201] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ 10.571253] RTL871X: rtw_ndev_init(wlan0) [ 10.576613] RTL871X: rtw_ndev_init(wlan1) [ 10.581937] usbcore: registered new interface driver rtl8723bu [ 10.587857] RTL871X: module init ret=0 [ OK ] Reached target Hardware activated USB gadget. [ 10.610405] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... [ 10.675892] usbcore: registered new interface driver rtl8xxxu Starting File System Check on /dev/mmcblk0p6... Starting Load/Save RF Kill Switch Status... [ 10.783149] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Reached target Swap. [ OK ] Finished File System Check on /dev/mmcblk0p6. [ OK ] Found device RTL8723BU 802.11b/g/n WLAN Adapter. [ OK ] Finished Helper to synchronize boot up for ifupdown. Mounting /mnt/data... [ 11.120888] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. [ OK ] Started ifup for eth0. [ OK ] Started ifup for eth1. [ OK ] Started ifup for wlan0. Starting Flush Journal to Persistent Storage... [ 11.413860] systemd-journald[137]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config files... [ 11.677658] random: crng init done [ 11.681114] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Monitor directorie… templates for wb-mqtt-serial. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Paths. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Authorization Manager... Starting User Login Management... [ 13.486678] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.492063] Bluetooth: BNEP filters: protocol multicast [ 13.497498] Bluetooth: BNEP socket layer initialized [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... [ OK ] Started Generates wb-mqtt-… UI schema for wb-mqtt-confed. Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started Bluetooth service. [ OK ] Started Authorization Manager. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started WPA supplicant. [ OK ] Started User Login Management. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. [ OK ] Started Network Manager. Starting Network Manager Wait Online... Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Finished Network Manager Wait Online. [ 17.833763] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 17.846897] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 17.854530] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 17.862219] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 17.869685] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ 19.632571] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 19.640930] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [FAILED] Failed to start Initialize…en Board Device Tree overlays. See 'systemctl status wb-hwconf-manager.service' for details. [DEPEND] Dependency failed for MQTT Driver for ADC. [DEPEND] Dependency failed for MQTT… for GPIO-controlled switches. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ INFO ] Skipped Power on GSM modem. [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [ OK ] Finished Permit User Sessions. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Getty on tty1. Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Stopped OpenBSD Secure Shell server. Starting OpenBSD Secure Shell server... [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [ OK ] Started Mosquitto MQTT Broker. [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost… generating archive with data. [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. [ OK ] Started Wiren Board journald to MQTT gateway. Starting Wiren Board MQTT to Modbus TCP gateway... [ OK ] Started metrics sender.. [ OK ] Started Virtual MQTT devic…r Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started MQTT Rule engine for Wiren Board. [ OK ] Started Wiren Board firmware update service. [FAILED] Failed to start A high per…er and a reverse proxy server. See 'systemctl status nginx.service' for details. [FAILED] Failed to start Wiren Board MQTT to OPC UA gateway. See 'systemctl status wb-mqtt-opcua.service' for details. [ OK ] Stopped OpenBSD Secure Shell server. Starting OpenBSD Secure Shell server... Starting USB Debug Network... [ OK ] Started KNX Daemon. [ OK ] Finished KNXD Configurator for Wiren Board. [ OK ] Started Network Time Service. [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [ OK ] Reached target Network is Online. Starting LSB: Brings up/down network automatically... Starting Initialize Wiren Board on successful boot... [ OK ] Started Wiren Board MQTT KNX bridge. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Stopped OpenBSD Secure Shell server. Starting OpenBSD Secure Shell server... [ 26.914979] process '/usr/sbin/netplugd' started with executable stack [ OK ] Stopped Wiren Board MQTT to OPC UA gateway. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Finished Compensation of s…ice-tree (with opposite sign). [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [FAILED] Failed to start Wiren Board MQTT to OPC UA gateway. See 'systemctl status wb-mqtt-opcua.service' for details. [ OK ] Stopped OpenBSD Secure Shell server. Starting OpenBSD Secure Shell server... [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [ OK ] Stopped MQTT Rule engine for Wiren Board. Starting Initialize Wiren Board Device Tree overlays... [ 27.861496] Mass Storage Function, version: 2009/09/11 [ 27.866765] LUN: removable file: (no medium) [ OK ] Stopped OpenBSD Secure Shell server. [FAILED] Failed to start OpenBSD Secure Shell server. [ 27.916893] using random self ethernet address [ 27.921420] using random host ethernet address See 'systemctl status ssh.service' for details. [ OK ] Stopped Wiren Board MQTT to OPC UA gateway. [ 28.340769] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 28.345446] dbg0: MAC 1a:55:89:a2:69:43 Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Finished USB Debug Network. [ OK ] Finished Initialize Wiren Board on successful boot. [FAILED] Failed to start Wiren Board MQTT to OPC UA gateway. See 'systemctl status wb-mqtt-opcua.service' for details. [FAILED] Failed to start Wiren Board MQTT to Modbus TCP gateway. See 'systemctl status wb-mqtt-mbgate.service' for details. [ OK ] Started LSB: Brings up/down network automatically.