U-Boot SPL 2021.10-wb1.1.1-g4c04347f3e (Feb 03 2022 - 14:48:16 +0000) DRAM: 1024 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.1.1-g4c04347f3e (Feb 03 2022 - 14:48:16 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd otp_program otp_aes_program ## Info: input data size = 43 = 0x2B bootcount=0 mmcpart=2 upgrade_available=0 Environment size: 43/131068 bytes ## Resetting to default environment ## Info: input data size = 43 = 0x2B Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 327 bytes read in 2 ms (159.2 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... Running default loadzimage ... 6029024 bytes read in 132 ms (43.6 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard720 54344 bytes read in 6 ms (8.6 MiB/s) 254 bytes read in 3 ms (82 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x5bfee0 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb104 (jenkins@wbdevenv) (arm-linux-gnueabi hf-gcc (Debian 6.3.0-18) 6.3.0 20170516, GNU ld (GNU Binutils for Debian) 2.28) #1 SMP Tue Feb 1 09:17:20 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.2.0 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x7ec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 19 pages/cpu s47884 r8192 d21748 u77824 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 roo twait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, li near) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1005604K/1048576K available (9216K kernel code, 1425K rwd ata, 3088K rodata, 1024K init, 296K bss, 26588K reserved, 16384K cma-reserved, 2 45748K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 30646 entries in 60 pages [ 0.000000] ftrace: allocated 60 pages with 4 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x680/0x84c wit h crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_ idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 43980 46511097ns [ 0.000021] Switching to timer-based delay loop, resolution 41ns [ 0.000351] Console: colour dummy device 80x30 [ 0.000421] Calibrating delay loop (skipped), value calculated using timer fr equency.. 48.00 BogoMIPS (lpj=240000) [ 0.000451] pid_max: default: 32768 minimum: 301 [ 0.000662] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linea r) [ 0.000688] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001769] CPU: Testing write buffer coherency: ok [ 0.002209] /cpus/cpu@0 missing clock-frequency property [ 0.002256] /cpus/cpu@1 missing clock-frequency property [ 0.002298] /cpus/cpu@2 missing clock-frequency property [ 0.002346] /cpus/cpu@3 missing clock-frequency property [ 0.002364] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003319] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.003524] rcu: Hierarchical SRCU implementation. [ 0.004419] smp: Bringing up secondary CPUs ... [ 0.015503] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.026779] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.037915] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.038104] smp: Brought up 1 node, 4 CPUs [ 0.038141] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.038155] CPU: All CPU(s) started in HYP mode. [ 0.038167] CPU: Virtualization extensions available. [ 0.039108] devtmpfs: initialized [ 0.050903] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.051212] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns [ 0.051248] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.052226] pinctrl core: initialized pinctrl subsystem [ 0.053689] NET: Registered protocol family 16 [ 0.056310] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.057527] thermal_sys: Registered thermal governor 'step_wise' [ 0.058119] No ATAGs? [ 0.058343] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.058362] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.106566] SCSI subsystem initialized [ 0.106825] usbcore: registered new interface driver usbfs [ 0.106889] usbcore: registered new interface driver hub [ 0.106965] usbcore: registered new device driver usb [ 0.107433] mc: Linux media interface: v0.10 [ 0.107483] videodev: Linux video capture interface: v2.00 [ 0.107548] pps_core: LinuxPPS API ver. 1 registered [ 0.107563] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti [ 0.107591] PTP clock support registered [ 0.107997] Advanced Linux Sound Architecture Driver Initialized. [ 0.109132] clocksource: Switched to clocksource arch_sys_counter [ 0.793321] NET: Registered protocol family 2 [ 0.794075] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.794134] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.794226] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.794350] TCP: Hash tables configured (established 8192 bind 8192) [ 0.794508] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.794581] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.794894] NET: Registered protocol family 1 [ 0.795937] RPC: Registered named UNIX socket transport module. [ 0.795964] RPC: Registered udp transport module. [ 0.795977] RPC: Registered tcp transport module. [ 0.795990] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.797667] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counter s available [ 0.799354] Initialise system trusted keyrings [ 0.799686] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.808074] NFS: Registering the id_resolver key type [ 0.808132] Key type id_resolver registered [ 0.808146] Key type id_legacy registered [ 0.808673] Key type asymmetric registered [ 0.808696] Asymmetric key parser 'x509' registered [ 0.808840] bounce: pool size: 64 pages [ 0.808899] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 47) [ 0.808916] io scheduler mq-deadline registered [ 0.808931] io scheduler kyber registered [ 0.810395] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.905383] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.919562] brd: module loaded [ 0.930500] loop: module loaded [ 0.941744] libphy: Fixed MDIO Bus: probed [ 0.942891] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regula tor [ 0.943568] libphy: sun4i_mii_bus: probed [ 0.945715] CAN device driver interface [ 0.947776] PPP generic driver version 2.4.2 [ 0.948044] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.948061] ehci-platform: EHCI generic platform driver [ 0.949233] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.949274] ohci-platform: OHCI generic platform driver [ 0.950398] usbcore: registered new interface driver usb-storage [ 0.950514] usbcore: registered new interface driver usbserial_generic [ 0.950554] usbserial: USB Serial support registered for generic [ 0.952704] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 0.952726] sun6i-rtc 1c20400.rtc: RTC enabled [ 0.953101] i2c /dev entries driver [ 0.959438] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, now ayout=0) [ 0.962572] ledtrig-cpu: registered to indicate activity on CPUs [ 0.963192] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) fro m 24000000 (24 Mhz) [ 0.963594] sun8i-ce 1c15000.crypto: will run requests pump with realtime pri ority [ 0.964079] sun8i-ce 1c15000.crypto: will run requests pump with realtime pri ority [ 0.964290] sun8i-ce 1c15000.crypto: will run requests pump with realtime pri ority [ 0.964489] sun8i-ce 1c15000.crypto: will run requests pump with realtime pri ority [ 0.964650] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 0.964856] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 0.965042] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 0.965226] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 0.965438] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 0.967263] usbcore: registered new interface driver usbhid [ 0.967282] usbhid: USB HID core driver [ 0.969998] iio-rescale a1-volt: using raw+scale source channel [ 0.970387] iio-rescale a2-volt: using raw+scale source channel [ 0.970749] iio-rescale a3-volt: using raw+scale source channel [ 0.971079] iio-rescale vin-volt: using raw+scale source channel [ 0.974215] NET: Registered protocol family 10 [ 0.975332] Segment Routing with IPv6 [ 0.975447] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.976200] NET: Registered protocol family 17 [ 0.976228] can: controller area network core [ 0.976343] NET: Registered protocol family 29 [ 0.976358] can: raw protocol [ 0.976373] can: broadcast manager protocol [ 0.976394] can: netlink gateway - max_hops=1 [ 0.976639] Key type dns_resolver registered [ 0.976771] Registering SWP/SWPB emulation handler [ 0.976886] registered taskstats version 1 [ 0.976943] Loading compiled-in X.509 certificates [ 0.997665] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.002203] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.003038] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dum my regulator [ 1.007852] printk: console [ttyS0] disabled [ 1.008010] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 52, base_baud = 15 00000) is a Allwinner sun4i [ 1.960065] printk: console [ttyS0] enabled [ 1.965350] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 1.972196] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 1.978813] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -5 17 [ 1.986156] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) f rom group PI18 on device 1c20800.pinctrl [ 1.996861] dw-apb-uart 1c28800.serial: Error applying setting, reverse thing s back [ 2.005238] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regula tor [ 2.013356] libphy: sun4i_mii_bus: probed [ 2.018291] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.025121] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.031762] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) stat us -517 [ 2.041355] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.048150] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.054789] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.062295] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) fr om group PH8 on device 1c20800.pinctrl [ 2.072834] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse thin gs back [ 2.081292] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.088084] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.094543] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -5 17 [ 2.101865] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.112218] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse thi ngs back [ 2.132417] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.146478] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-00 34/axp221-pek/input/input0 [ 2.166497] vcc-3v3: supplied by regulator-dummy [ 2.172191] vdd-cpu: supplied by regulator-dummy [ 2.177726] vdd-sys: supplied by regulator-dummy [ 2.183310] dcdc4: supplied by regulator-dummy [ 2.188382] vcc-dram: Bringing 1500000uV into 1350000-1350000uV [ 2.194990] vcc-dram: supplied by regulator-dummy [ 2.199903] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.206900] vcc-gmac-phy: supplied by vcc-3v3 [ 2.211871] random: fast init done [ 2.215777] dc5ldo: supplied by vcc-dram [ 2.220346] tv: Bringing 700000uV into 3300000-3300000uV [ 2.226325] tv: supplied by regulator-dummy [ 2.231139] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.237508] aldo2: supplied by regulator-dummy [ 2.243375] avcc-pll: supplied by regulator-dummy [ 2.249016] eldo1: supplied by regulator-dummy [ 2.254487] eldo2: supplied by regulator-dummy [ 2.259592] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.266459] vcc-pe: supplied by regulator-dummy [ 2.271650] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.278659] vcc-sd-alt: supplied by regulator-dummy [ 2.284531] dldo2: supplied by regulator-dummy [ 2.289998] dldo3: supplied by regulator-dummy [ 2.295384] dldo4: supplied by regulator-dummy [ 2.300400] rtc_ldo: supplied by regulator-dummy [ 2.305947] ldo_io0: supplied by regulator-dummy [ 2.311502] ldo_io1: supplied by regulator-dummy [ 2.322554] axp20x-adc axp22x-adc: DMA mask not set [ 2.328871] axp20x-i2c 0-0034: AXP20X driver loaded [ 2.364355] rtc rtc0: Power loss detected, invalid time [ 2.369857] rtc-pcf85063 2-0051: registered as rtc0 [ 2.384079] rtc rtc0: Power loss detected, invalid time [ 2.389370] rtc-pcf85063 2-0051: setting system clock to 2022-02-23T06:24:18 UTC (1645597458) [ 2.403942] lm75 2-0048: supply vs not found, using dummy regulator [ 2.414640] lm75 2-0048: hwmon0: sensor 'lm75b' [ 2.449060] at24 3-0050: supply vcc not found, using dummy regulator [ 2.457066] at24 3-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 2.475101] i2c-gpio i2c_eeprom1: using lines 48 (SDA) and 49 (SCL) [ 2.487201] at24 4-0050: supply vcc not found, using dummy regulator [ 2.495173] at24 4-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 2.507536] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, u ses new timings mode [ 2.513118] i2c-gpio i2c_eeprom2: using lines 46 (SDA) and 47 (SCL) [ 2.523112] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 2.531819] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 53, base_baud = 15 00000) is a Allwinner sun4i [ 2.542301] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regula tor [ 2.550349] libphy: sun4i_mii_bus: probed [ 2.627435] mmc0: new DDR MMC card at address 0001 [ 2.633159] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 2.638082] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 2.644446] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 2.650714] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB, chardev (246: 0) [ 2.661248] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.695491] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 65 MAC: e8:eb :1b:40:4d:1f [ 2.704810] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 2.711210] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 2.720187] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 2.726316] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supporte d [ 2.733579] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supporte d [ 2.740823] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 2.745788] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 2.752584] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 2.758242] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 2.764590] libphy: stmmac: probed [ 3.021727] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.027338] ehci-platform 1c14000.usb: new USB bus registered, assigned bus n umber 1 [ 3.035518] ehci-platform 1c14000.usb: irq 37, io mem 0x01c14000 [ 3.069139] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.076269] hub 1-0:1.0: USB hub found [ 3.080130] hub 1-0:1.0: 1 port detected [ 3.085354] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.090993] ehci-platform 1c19000.usb: new USB bus registered, assigned bus n umber 2 [ 3.099077] ehci-platform 1c19000.usb: irq 39, io mem 0x01c19000 [ 3.129142] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.136185] hub 2-0:1.0: USB hub found [ 3.140018] hub 2-0:1.0: 1 port detected [ 3.145153] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.150764] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus n umber 3 [ 3.158767] ehci-platform 1c1c000.usb: irq 41, io mem 0x01c1c000 [ 3.189608] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.196621] hub 3-0:1.0: USB hub found [ 3.200452] hub 3-0:1.0: 1 port detected [ 3.299232] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.305870] ohci-platform 1c14400.usb: new USB bus registered, assigned bus n umber 4 [ 3.313843] ohci-platform 1c14400.usb: irq 38, io mem 0x01c14400 [ 3.394073] hub 4-0:1.0: USB hub found [ 3.397885] hub 4-0:1.0: 1 port detected [ 3.403057] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 3.409718] ohci-platform 1c19400.usb: new USB bus registered, assigned bus n umber 5 [ 3.417667] ohci-platform 1c19400.usb: irq 40, io mem 0x01c19400 [ 3.494031] hub 5-0:1.0: USB hub found [ 3.497852] hub 5-0:1.0: 1 port detected [ 3.503006] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 3.509684] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus n umber 6 [ 3.517493] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 3.524765] ohci-platform 1c1c400.usb: irq 42, io mem 0x01c1c400 [ 3.604065] hub 6-0:1.0: USB hub found [ 3.607880] hub 6-0:1.0: 1 port detected [ 3.613956] of_cfs_init [ 3.615243] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 3.616531] of_cfs_init: OK [ 3.628330] ALSA device list: [ 3.631364] No soundcards found. [ 3.646322] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 3.664384] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesyst em [ 3.671743] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.297752] EXT4-fs (mmcblk0p2): recovery complete [ 4.304757] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null) [ 4.312964] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.323722] devtmpfs: mounted [ 4.332086] Freeing unused kernel memory: 1024K [ 4.336835] Run /sbin/init as init process [ 4.556108] random: systemd: uninitialized urandom read (16 bytes read) [ 4.567829] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL + XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.590366] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 4.629961] systemd[1]: Set hostname to . [ 4.662446] random: systemd: uninitialized urandom read (16 bytes read) [ 4.678082] random: systemd-gpt-aut: uninitialized urandom read (16 bytes rea d) [ 4.926845] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 4.959702] systemd[1]: Started Forward Password Requests to Wall Directory W atch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 4.999523] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.040029] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.079663] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.109534] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.139879] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ OK ] Created slice system-getty.slice. Mounting POSIX Message Queue File System... Starting Load Kernel Modules... [ OK ] Listening on udev Control Socket. Mounting /sys/kernel/config... [ OK ] Reached target Slices. Starting File System Check on Root Device... Mounting Debug File System... [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Encrypted Volumes. [ OK ] Listening on udev Kernel Socket. [ OK ] Reached target Remote File Systems. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Listening on Syslog Socket. Starting Journal Service... Starting Create list of required st…ce nodes for the current kernel... [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted /sys/kernel/config. [ OK ] Started Journal Service. [ OK ] Started Load Kernel Modules. [ OK ] Started File System Check on Root Device. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started File System Check Daemon to report status. Starting Create Static Device Nodes in /dev... Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 6.054182] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Apply Kernel Variables. Starting udev Coldplug all Devices... Starting Load/Save Random Seed... Starting prepare partitions at first boot... Starting udev Kernel Device Manager... [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Kernel Device Manager. [ OK ] Started prepare partitions at first boot. [ OK ] Reached target Local File Systems (Pre). [ 6.894814] Driver for 1-wire Dallas network protocol. [ OK ] Started udev Coldplug all Devices. [ 7.071824] usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, usi ng dummy regulator [ 7.157177] Bluetooth: Core ver 2.22 [ 7.161017] NET: Registered protocol family 31 [ 7.165481] Bluetooth: HCI device and connection manager initialized [ 7.171949] Bluetooth: HCI socket layer initialized [ 7.176870] Bluetooth: L2CAP socket layer initialized [ 7.182091] Bluetooth: SCO socket layer initialized [ OK ] Found device /dev/ttyS0. [ 7.223677] usbcore: registered new interface driver btusb [ 7.235270] cfg80211: Loading compiled-in X.509 certificates for regulatory d atabase [ 7.236392] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=0 6 lmp_subver=8723 [ 7.254430] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 7.260553] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 7.280617] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 7.287137] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.b in failed with error -2 [ 7.296512] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 7.342194] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.354797] platform regulatory.0: Direct firmware load for regulatory.db fai led with error -2 [ 7.363544] cfg80211: failed to load regulatory.db [ OK ] Found device /dev/mmcblk0p6. [ OK ] Found device /dev/mmcblk0p5. Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... [ 7.829443] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 acr oss:262140k SS [ 7.868471] RTL871X: module init start [ 7.872429] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 [ 7.879516] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ OK ] Activated swap /dev/mmcblk0p5. [ 8.077516] RTL871X: rtw_ndev_init(wlan0) [ 8.087936] RTL871X: rtw_ndev_init(wlan1) [ 8.093606] usbcore: registered new interface driver rtl8723bu [ 8.099632] RTL871X: module init ret=0 [ 8.111374] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ 8.221244] usbcore: registered new interface driver rtl8xxxu [ OK ] Started File System Check on /dev/mmcblk0p6. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Mounting /mnt/data... [ OK ] Reached target Swap. [ 8.873630] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. O pts: (null) [ OK ] Mounted /mnt/data. Starting Load/Save RF Kill Switch Status... Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Reached target Local File Systems. Starting prepare mounts and symlinks to config files... Starting Raise network interfaces... Starting Flush Journal to Persistent Storage... [ OK ] Started Raise network interfaces. [ 9.247046] systemd-journald[121]: Received request to flush runtime journal from PID 1 [ 9.280971] systemd-journald[121]: File /var/log/journal/93fb028105133f2a3b0b cde661fb8c16/system.journal corrupted or uncleanly shut down, renaming and repla cing. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. [ OK ] Reached target System Time Synchronized. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Started Monitor directories with device templates for wb-mqtt-serial. [ OK ] Reached target Paths. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Basic System. Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... [ OK ] Started Cgroup management daemon. [ 10.478949] new mount options do not match the existing superblock, will be i gnored [ OK ] Started D-Bus System Message Bus. Starting Mosquitto MQTT v3.1/v3.1.1 Broker... [ OK ] Started Regular background program processing daemon. Starting initialize filesystems at first boot... [ OK ] Started Generates wb-mqtt-serial UI schema for wb-mqtt-confed. Starting System Logging Service... Starting Restore local date from Wiren Board GSM RTC... Starting Login Service... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Bluetooth service... [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Started System Logging Service. [ 11.020068] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.025435] Bluetooth: BNEP filters: protocol multicast [ 11.030862] Bluetooth: BNEP socket layer initialized [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ OK ] Started Mosquitto MQTT v3.1/v3.1.1 Broker. [ OK ] Started Bluetooth service. [ OK ] Started initialize filesystems at first boot. [ OK ] Started Login Service. Starting Hostname Service... [ OK ] Reached target Network. Starting OpenBSD Secure Shell server... Starting A high performance web server and a reverse proxy server... Starting Permit User Sessions... Starting KNX Daemon... Starting dnsmasq - A lightweight DHCP and caching DNS server... Starting Avahi mDNS/DNS-SD Stack... [ OK ] Reached target Bluetooth. Starting Daily apt upgrade and clean activities... [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board firmware update service. Starting Wiren Board MQTT to Modbus TCP gateway... Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started KNX Daemon. [ OK ] Started Permit User Sessions. [ OK ] Started Hostname Service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Reached target Network is Online. Starting LSB: Start NTP daemon... Starting LSB: Brings up/down network automatically... [ OK ] Started SprutHub. Starting LSB: Advanced IEEE 802.11 management daemon... [ OK ] Started Wiren Board MQTT to OPC UA gateway. [ 12.845185] process '/sbin/netplugd' started with executable stack [ OK ] Started dnsmasq - A lightweight DHCP and caching DNS server. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started LSB: Start NTP daemon. Starting Compensation of systime in…evice-tree (with opposite sign)... [ OK ] Started Compensation of systime in … device-tree (with opposite sign). [ 13.899544] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 130, base_baud = 1 500000) is a Allwinner sun4i [ 14.119832] RTL871X: RTW_ADAPTIVITY_EN_ [ 14.119863] AUTO, chplan:0x20, Regulation:3,3 [ 14.128178] RTL871X: RTW_ADAPTIVITY_MODE_ [ 14.128194] NORMAL [ 14.431836] random: crng init done [ 14.435277] random: 7 urandom warning(s) missed due to ratelimiting [ 14.876174] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 131, base_baud = 1 500000) is a Allwinner sun4i [ 15.550614] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-0:00] driver [ICPl us IP101A/G] (irq=POLL) [ OK ] Started A high performance web server and a [ 15.579331] sun4i-emac 1 c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off reverse proxy server. [ 15.593003] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support fou nd [ 15.600504] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters ava ilable [ 15.608258] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW Starting Initialize Wiren Board on successful boot... [ 15.688672] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link m ode [ 15.718403] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Started Initialize Wiren Board Device Tree overlays. Starting MQTT Driver for GPIO-controlled switches... Starting MQTT Driver for ADC... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Wiren Board database logger. [ 15.996028] RTL871X: assoc success [ 15.999815] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ OK ] Started MQTT Rule engine for Wiren Board. [ OK ] Started metrics sender.. Starting KNXD Configurator for Wiren Board... [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started one-click diagnostic data c…ard, generating archive with data. [ OK ] Started Wiren Board MQTT KNX bridge. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. Debian GNU/Linux 9 wirenboard-A7KLBEAG ttyS0 wirenboard-A7KLBEAG login: [ 33.759163] vcc-gmac-phy: disabling [ 33.763290] dc5ldo: disabling [ 33.766868] dldo4: disabling [ 33.771580] vcc-sd: disabling Debian GNU/Linux 9 wirenboard-A7KLBEAG ttyS0 wirenboard-A7KLBEAG login: 46511097ns t-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001769] CPU: Testing write buffer coherency: ok [ 0.002209] /cpus/cpu@0 missing clock-frequency property [ 0.002256] /cpus/cpu@1 missing clock-frequency property [ 0.002298] /cpus/cpu@2 missing clock-frequency property [ 0.002346] /cpus/cpu@3 missing clock-frequency property [ 0.002364] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003319] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.003524] rcu: Hierarchical SRCU implementation. [ 0.004419] smp: Bringing up secondary CPUs ... [ 0.015503] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.026779] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.037915] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.038104] smp: Brought up 1 node, 4 CPUs [ 0.038141] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.038155] CPU: All CPU(s) started in HYP mode. [ 0.038167] CPU: Virtualization extensions available. [ 0.039108] devtmpfs: initialized [ 0.050903] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.051212] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.051248] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.052226] pinctrl core:Пароль: ters. [ 0.058362] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.106566] SCSI subsystem initialized [ 0.106825] usbcore: registered new interface driver usbfs [ 0.106889] usbcore: registered new interface driver hub [ 0.106965] usbcore: registered new device driver usb [ 0.107433] mc: Linux media interface: v0.10 [ 0.107483] videodev: Linux video capture interface: v2.00 [ 0.107548] pps_core: LinuxPPS API ver. 1 registered [ 0.107563] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.107591] PTP clock support registered [ 0.107997] Advanced Linux Sound Architecture Driver Initialized. [ 0.109132] clocksource: Switched to clocksource arch_sys_counter [ 0.793321] NET: Registered protocol family 2 [ 0.794075] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.794134] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.794226] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.794350] TCP: Hash tables configured (established 8192 bind 8192) [ 0.794508] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.794581] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.794894] NET: Registered protocol family 1 [ 0.795937] RPC: Registered named UNIX socket transport module. [ 0.795964] RPC: Registered udp transport module. [ 0.795977] RPC: Registered tcp transport module. [ 0.795990] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.797667] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.799354] Initialise system trusted keyrings [ 0.799686] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.808074] NFS: Registering the id_resolver key type [ 0.808132] Key type id_resolver registered [ 0.808146] Key type id_legacy registered [ 0.808673] Key type asymmetric registered [ 0.808696] Asymmetric key parser 'x509' registered [ 0.808840] bounce: pool size: 64 pages [ 0.808899] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.808916] io scheduler mq-deadline registered [ 0.808931] io scheduler kyber registered [ 0.810395] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.905383] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.919562] brd: module loaded [ 0.930500] loop: module loaded [ 0.941744] libphy: Fixed MDIO Bus: probed [ 0.942891] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 0.943568] libphy: sun4i_mii_bus: probed [ 0.945715] CAN device driver interface [ 0.947776] PPP generic driver version 2.4.2 [ 0.948044] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.948061] ehci-platform: EHCI generic platform driver [ 0.949233] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.949274] ohci-platform: OHCI generic platform driver [ 0.950398] usbcore: registered new interface driver us Неверное имя пользователя b-storage [ 0.950514] usbcore: registered new interface driver usbserial_generic [ 0.950554] usbserial: USB Serial support registered for generic [ 0.952704] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 0.952726] sun6i-rtc 1c20400.rtc: RTC enabled [ 0.953101] i2c /dev entries driver [ 0.959438] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.962572] ledtrig-cpu: registered to indicate activity on CPUs [ 0.963192] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 0.963594] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.964079] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.964290] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.964489] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 0.964650] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 0.964856] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 0.965042] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 0.965226] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 0.965438] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 0.967263] usbcore: registered new interface driver usbhid [ 0.967282] usbhid: USB HID core driver [ 0.969998] iio-rescale a1-volt: using raw+scale source channel [ 0.970387] iio-rescale a2-volt: using raw+scale source channel [ 0.970749] iio-rescale a3-volt: using raw+scale source channel [ 0.971079] iio-rescale vin-volt: using raw+scale source channel [ 0.974215] NET: Registered protocol family 10 [ 0.975332] Segment Routing with IPv6 [ 0.975447] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.976200] NET: Registered protocol family 17 [ 0.976228] can: controller area network core [ 0.976343] NET: Registered protocol family 29 [ 0.976358] can: raw protocol [ 0.976373] can: broadcast manager protocol [ 0.976394] can: netlink gateway - max_hops=1 [ 0.976639] Key type dns_resolver registered [ 0.976771] Registering SWP/SWPB emulation handler [ 0.976886] registered taskstats version 1 [ 0.976943] Loading compiled-in X.509 certificates [ 0.997665] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.002203] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.003038] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.007852] printk: console [ttyS0] disabled [ 1.008010] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 52, base_baud = 1500000) is a Allwinner sun4i [ 1.960065] printk: console [ttyS0] enabled [ 1.965350] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 1.972196] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 1.978813] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 1.986156] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 1.996861] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.005238] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.013356] libphy: sun4i_mii_bus: probed [ 2.018291] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.025121] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.031762] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.041355] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.048150] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.054789] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.062295] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.072834] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.081292] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.088084] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.094543] sun4i-pinctrl 1c20wirenboard-A7KLBEAG имя пользователя: 800.pinctrПароль: Неверное имя пользователя Checksum insertion supported [ 2.752584] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 2.758242] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 2.764590] libphy: stmmac: probed [ 3.021727] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.027338] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.035518] ehci-platform 1c14000.usb: irq 37, io mem 0x01c14000 [ 3.069139] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.076269] hub 1-0:1.0: USB hub found [ 3.080130] hub 1-0:1.0: 1 port detected [ 3.085354] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.090993] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.099077] ehci-platform 1c19000.usb: irq 39, io mem 0x01c19000 [ 3.129142] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.136185] hub 2-0:1.0: USB hub found [ 3.140018] hub 2-0:1.0: 1 port detected [ 3.145153] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.150764] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.158767] ehci-platform 1c1c000.usb: irq 41, io mem 0x01c1c000 [ 3.189608] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.196621] hub 3-0:1.0: USB hub found [ 3.200452] hub 3-0:1.0: 1 port detected [ 3.299232] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.305870] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.313843] ohci-platform 1c14400.usb: irq 38, io mem 0x01c14400 [ 3.394073] hub 4-0:1.0: USB hub found [ 3.397885] hub 4-0:1.0: 1 port detected [ 3.403057] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 3.409718] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 3.417667] ohci-platform 1c19400.usb: irq 40, io mem 0x01c19400 [ 3.494031] hub 5-0:1.0: USB hub found [ 3.497852] hub 5-0:1.0: 1 port detected [ 3.503006] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 3.509684] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 3.517493] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 3.524765] ohci-platform 1c1c400.usb: irq 42, io mem 0x01c1c400 [ 3.604065] hub 6-0:1.0: USB hub found [ 3.607880] hub 6-0:1.0: 1 port detected [ 3.613956] of_cfs_init [ 3.615243] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 3.616531] of_cfs_init: OK [ 3.628330] ALSA device list: [ 3.631364] No soundcards found. [ 3.646322] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 3.664384] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 3.671743] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.297752] EXT4-fs (mmcblk0p2): recovery complete [ 4.304757] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.312964] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.323722] devtmpfs: mounted [ 4.332086] Freeing unused kernel memory: 1024K [ 4.336835] Run /sbin/init as init process [ 4.556108] random: systemd: uninitialized urandom read (16 bytes read) [ 4.567829] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.590366] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 4.629961] systemd[1]: Set hostname to . [ 4.662446] random: systemd: uninitialized urandom read (16 bytes read) [ 4.678082] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read) [ 4.926845] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 4.959702] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 4.999523] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fscwirenboard-A7KLBEAG имя пользователя: k to fsckd communication SockeПароль: Неверное имя пользователя 7.868471] RTL871X: module init start [ 7.872429] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 [ 7.879516] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ OK ] Activated swap /dev/mmcblk0p5. [ 8.077516] RTL871X: rtw_ndev_init(wlan0) [ 8.087936] RTL871X: rtw_ndev_init(wlan1) [ 8.093606] usbcore: registered new interface driver rtl8723bu [ 8.099632] RTL871X: module init ret=0 [ 8.111374] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ 8.221244] usbcore: registered new interface driver rtl8xxxu [ OK ] Started File System Check on /dev/mmcblk0p6. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Mounting /mnt/data... [ OK ] Reached target Swap. [ 8.873630] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /mnt/data. Starting Load/Save RF Kill Switch Status... Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Reached target Local File Systems. Starting prepare mounts and symlinks to config files... Starting Raise network interfaces... Starting Flush Journal to Persistent Storage... [ OK ] Started Raise network interfaces. [ 9.247046] systemd-journald[121]: Received request to flush runtime journal from PID 1 [ 9.280971] systemd-journald[121]: File /var/log/journal/93fb028105133f2a3b0bcde661fb8c16/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. [ OK ] Reached target System Time Synchronized. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Started Monitor directories with device templates for wb-mqtt-serial. [ OK ] Reached target Paths. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Basic System. Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... [ OK ] Started Cgroup management daemon. [ 10.478949] new mount options do not match the existing superblock, will be ignored [ OK ] Started D-Bus System Message Bus. Starting Mosquitto MQTT v3.1/v3.1.1 Broker... [ OK ] Started Regular background program processing daemon. Starting initialize filesystems at first boot... [ OK ] Started Generates wb-mqtt-serial UI schema for wb-mqtt-confed. Starting System Logging Service... Starting Restore local date from Wiren Board GSM RTC... Starting Login Service... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Bluetooth service... [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Started System Logging Service. [ 11.020068] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.025435] Bluetooth: BNEP filters: protocol multicast [ 11.030862] Bluetooth: BNEP socket layer initialized [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ OK ] Started Mosquitto MQTT v3.1/v3.1.1 Broker. [ OK ] Started Bluetooth service. [ OK ] Started initialize filesystems at first boot. [ OK ] Started Login Service. Starting Hostname Service... [ OK ] Reached target Network. Starting OpenBSD Secure Shell server... Starting A high performance web server and a reverse proxy server... Starting Permit User Sessions... Starting KNX Daemon... Starting dnsmasq - A lightweight DHCP wirenboard-A7KLBEAG имя пользователя: and caching DNS server... StarПароль: Неверное имя пользователя 1] pid_max: default: 32768 minimum: 301 [ 0.000662] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000688] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001769] CPU: Testing write buffer coherency: ok [ 0.002209] /cpus/cpu@0 missing clock-frequency property [ 0.002256] /cpus/cpu@1 missing clock-frequency property [ 0.002298] /cpus/cpu@2 missing clock-frequency property [ 0.002346] /cpus/cpu@3 missing clock-frequency property [ 0.002364] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003319] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.003524] rcu: Hierarchical SRCU implementation. [ 0.004419] smp: Bringing up secondary CPUs ... [ 0.015503] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.026779] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.037915] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.038104] smp: Brought up 1 node, 4 CPUs [ 0.038141] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.038155] CPU: All CPU(s) started in HYP mode. [ 0.038167] CPU: Virtualization extensions available. [ 0.039108] devtmpfs: initialized [ 0.050903] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.051212] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.051248] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.052226] pinctrl core: initialized pinctrl subsystem [ 0.053689] NET: Registered protocol family 16 [ 0.056310] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.057527] thermal_sys: Registered thermal governor 'step_wise' [ 0.058119] No ATAGs? [ 0.058343] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.058362] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.106566] SCSI subsystem initialized [ 0.106825] usbcore: registered new interface driver usbfs [ 0.106889] usbcore: registered new interface driver hub [ 0.106965] usbcore: registered new device driver usb [ 0.107433] mc: Linux media interface: v0.10 [ 0.107483] videodev: Linux video capture interface: v2.00 [ 0.107548] pps_core: LinuxPPS API ver. 1 registered [ 0.107563] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.107591] PTP clock support registered [ 0.107997] Advanced Linux Sound Architecture Driver Initialized. [ 0.109132] clocksource: Switched to clocksource arch_sys_counter [ 0.793321] NET: Registered protocol family 2 [ 0.794075] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.794134] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.794226] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.794350] TCP: Hash tables configured (established 8192 bind 8192) [ 0.794508] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.794581] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.794894] NET: Registered protocol family 1 [ 0.795937] RPC: Registered named UNIX socket transport module. [ 0.795964] RPC: Registered udp transport module. [ 0.795977] RPC: Registered tcp transport module. [ 0.795990] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.797667] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.799354] Initialise system trusted keyrings [ 0.799686] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.808074] NFS: Registering the id_resolver key type [ 0.808132] Key type id_resolver registered [ 0.808146] Key type id_legacy registered [ 0.808673] Key type asymmetric registered [ 0.808696] Asymmetric key parser 'x509' registered [ 0.808840] bounce: pool size: 64 pages [ 0.808899] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.808916] io scheduler mq-deadline registered [ 0.808931] io schedulewirenboard-A7KLBEAG имя пользователя: r kyber registered [ 0.810395] sun4i-Пароль: Неверное имя пользователя Превышено максимальное число попыток (5) Debian GNU/Linux 9 wirenboard-A7KLBEAG ttyS0 wirenboard-A7KLBEAG login: Debian GNU/Linux 9 wirenboard-A7KLBEAG ttyS0 wirenboard-A7KLBEAG login: root Пароль: Последний вход в систему:Вт фев 22 19:29:09 UTC 2022на ttyS0 _ _ _ __ _(_)_ __ ___ _ __ | |__ ___ __ _ _ __ __| | \ \ /\ / / | '__/ _ \ '_ \| '_ \ / _ \ / _` | '__/ _` | \ V V /| | | | __/ | | | |_) | (_) | (_| | | | (_| | \_/\_/ |_|_| \___|_| |_|_.__/ \___/ \__,_|_| \__,_| Welcome to Wiren Board 7.2.1 (s/n A7KLBEAG), release wb-2201 (as stable) Linux wirenboard-A7KLBEAG 5.