=~=~=~=~=~=~=~=~=~=~=~= MobaXterm log 2025.07.02 14:30:21 =~=~=~=~=~=~=~=~=~=~=~= [ INFO ] Skipped Power on GSM modem. [ OK ] Reached target Network (Pre). Starting Network Manager... Starting Raise network interfaces... [ 34.407350] vcc-gmac-phy: disabling [ 34.414750] dc5ldo: disabling [ 34.418212] dldo4: disabling [ 34.421506] vdd-sd-power: disabling [ 34.425040] vcc-sd: disabling [ 34.428166] mod1_pimux_dummy: disabling [ 34.432100] mod2_pimux_dummy: disabling [ OK ] Finished Raise network interfaces. [ OK ] Started Network Manager. [ OK ] Reached target Network. Starting Network Manager Wait Online... Starting dnsmasq - A lightDHCP and caching DNS server... Starting Access point and rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Starting Tailscale node agent... [ OK ] Started Network connectionrvice for Wiren Board devices. Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ 35.870000] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ OK ] Started KNX Daemon. [ 35.893272] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 35.900872] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 35.908656] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ INFO ] Skipped dnsmasq - A lightwt DHCP and caching DNS server. [ 35.940658] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ OK ] Finished KNXD Configurator for Wiren Board. [ INFO ] Skipped Access point and aserver for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [ OK ] Reached target Host and Network Name Lookups. Starting Network Manager Script Dispatcher Service... [ OK ] Started Getty on tty1. Starting A high performanc and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of se-tree (with opposite sign)... [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Finished Compensation of sice-tree (with opposite sign). [ 37.098711] RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384) [ OK ] Started Mosquitto MQTT Broker. [ OK ] Started MQTT Driver for GPIO-controlled switches. [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost generating archive with data. [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. Starting Wiren Board MQTT to IEC 60870-5-104 gateway... [ OK ] Started Wiren Board MQTT KNX bridge. [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board MQTT to Modbus gateway. [ OK ] Started metrics sender.. [ OK ] Started Virtual MQTT devicr Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started MQTT Rule engine for Wiren Board. [ 38.198684] tun: Universal TUN/TAP device driver, 1.6 [ OK ] Started Wiren Board firmware update service. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Tailscale node agent. [ OK ] Started A high performanceer and a reverse proxy server. Starting Initialize Wiren Board on successful boot... Starting USB Debug Network... Debian GNU/Linux 11 wirenboard-ALBFXAYW ttyS0 wirenboard-ALBFXAYW login: [ 44.164407] Mass Storage Function, version: 2009/09/11 [ 44.169711] LUN: removable file: (no medium) [ 44.223330] using random self ethernet address [ 44.228013] using random host ethernet address [ 44.407861] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 44.412514] dbg0: MAC 1a:55:89:a2:69:43 [ 50.001176] process '/usr/sbin/netplugd' started with executable stack [EC] Watchdog is timed out, reset power. U-Boot SPL 2021.10-wb1.7.2-gbf311aa30b (Sep 23 2023 - 11:10:21 +0000) DRAM: 2048 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.2-gbf311aa30b (Sep 23 2023 - 11:10:21 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 2 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 1 ms (318.4 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502352 bytes read in 171 ms (36.3 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57964 bytes read in 6 ms (9.2 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-commercial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x6337d0 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb173 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Nov 19 12:20:02 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0xbec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 2043848K/2097152K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 36920K reserved, 16384K cma-reserved, 1294324K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000024] Switching to timer-based delay loop, resolution 41ns [ 0.000409] Console: colour dummy device 80x30 [ 0.000487] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000519] pid_max: default: 32768 minimum: 301 [ 0.000774] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000802] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003213] CPU: Testing write buffer coherency: ok [ 0.003871] /cpus/cpu@0 missing clock-frequency property [ 0.003943] /cpus/cpu@1 missing clock-frequency property [ 0.004012] /cpus/cpu@2 missing clock-frequency property [ 0.004086] /cpus/cpu@3 missing clock-frequency property [ 0.004112] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005521] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.005747] rcu: Hierarchical SRCU implementation. [ 0.006715] smp: Bringing up secondary CPUs ... [ 0.019353] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031303] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.042825] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.043071] smp: Brought up 1 node, 4 CPUs [ 0.043118] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.043135] CPU: All CPU(s) started in HYP mode. [ 0.043150] CPU: Virtualization extensions available. [ 0.044453] devtmpfs: initialized [ 0.066300] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.066613] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.066648] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.068969] pinctrl core: initialized pinctrl subsystem [ 0.071081] NET: Registered protocol family 16 [ 0.075605] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.077138] thermal_sys: Registered thermal governor 'step_wise' [ 0.077639] No ATAGs? [ 0.077863] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.077879] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.162881] SCSI subsystem initialized [ 0.163319] usbcore: registered new interface driver usbfs [ 0.163410] usbcore: registered new interface driver hub [ 0.163501] usbcore: registered new device driver usb [ 0.163969] mc: Linux media interface: v0.10 [ 0.164043] videodev: Linux video capture interface: v2.00 [ 0.164128] pps_core: LinuxPPS API ver. 1 registered [ 0.164144] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.164177] PTP clock support registered [ 0.164489] Advanced Linux Sound Architecture Driver Initialized. [ 0.166628] clocksource: Switched to clocksource arch_sys_counter [ 1.244921] NET: Registered protocol family 2 [ 1.245932] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.245994] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.246082] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.246210] TCP: Hash tables configured (established 8192 bind 8192) [ 1.246369] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.246447] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.247355] NET: Registered protocol family 1 [ 1.248976] RPC: Registered named UNIX socket transport module. [ 1.249010] RPC: Registered udp transport module. [ 1.249031] RPC: Registered tcp transport module. [ 1.249052] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.251109] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.254247] Initialise system trusted keyrings [ 1.254642] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.268421] NFS: Registering the id_resolver key type [ 1.268480] Key type id_resolver registered [ 1.268493] Key type id_legacy registered [ 1.428055] Key type asymmetric registered [ 1.428119] Asymmetric key parser 'x509' registered [ 1.428496] bounce: pool size: 64 pages [ 1.428639] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.428674] io scheduler mq-deadline registered [ 1.428701] io scheduler kyber registered [ 1.430439] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.469807] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.494042] brd: module loaded [ 1.511562] loop: module loaded [ 1.520978] libphy: Fixed MDIO Bus: probed [ 1.523034] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.523862] libphy: sun4i_mii_bus: probed [ 1.527703] CAN device driver interface [ 1.530329] PPP generic driver version 2.4.2 [ 1.530593] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.530610] ehci-platform: EHCI generic platform driver [ 1.533283] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.533336] ohci-platform: OHCI generic platform driver [ 1.534786] usbcore: registered new interface driver usb-storage [ 1.534920] usbcore: registered new interface driver usbserial_generic [ 1.534967] usbserial: USB Serial support registered for generic [ 1.538844] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 1.538876] sun6i-rtc 1c20400.rtc: RTC enabled [ 1.539796] i2c /dev entries driver [ 1.550654] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.555603] ledtrig-cpu: registered to indicate activity on CPUs [ 1.556421] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.556855] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.557407] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.557619] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.557820] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.558281] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 1.559104] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 1.559574] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 1.559934] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 1.560299] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 1.562661] usbcore: registered new interface driver usbhid [ 1.562683] usbhid: USB HID core driver [ 1.572875] Initializing XFRM netlink socket [ 1.573653] NET: Registered protocol family 10 [ 1.576023] Segment Routing with IPv6 [ 1.576263] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.577501] NET: Registered protocol family 17 [ 1.577545] can: controller area network core [ 1.577707] NET: Registered protocol family 29 [ 1.577726] can: raw protocol [ 1.577745] can: broadcast manager protocol [ 1.577772] can: netlink gateway - max_hops=1 [ 1.577962] can: SAE J1939 [ 1.578379] Key type dns_resolver registered [ 1.578485] Registering SWP/SWPB emulation handler [ 1.578615] registered taskstats version 1 [ 1.578695] Loading compiled-in X.509 certificates [ 1.611309] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.617968] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.620238] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.626300] printk: console [ttyS0] disabled [ 1.626602] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 2.570322] printk: console [ttyS0] enabled [ 2.576604] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.583406] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.590053] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.597410] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.608186] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.626481] wbec-rtc wbec-rtc.4.auto: DMA mask not set [ 2.633248] wbec-rtc wbec-rtc.4.auto: registered as rtc0 [ 2.638859] wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-07-02T11:31:52 UTC (1751455912) [ 2.651645] wbec spi0.0: WBEC device added [ 2.657790] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.665939] libphy: sun4i_mii_bus: probed [ 2.671031] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.678116] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.684781] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.695756] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.702635] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.709284] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.716840] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.727520] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.736110] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.742919] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.749454] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.756807] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.767185] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.786240] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.805724] vcc-3v3: supplied by regulator-dummy [ 2.811698] vdd-cpu: supplied by regulator-dummy [ 2.817499] vdd-sys: supplied by regulator-dummy [ 2.823191] dcdc4: supplied by regulator-dummy [ 2.828841] vcc-dram: supplied by regulator-dummy [ 2.833750] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.840785] vcc-gmac-phy: supplied by vcc-3v3 [ 2.846338] dc5ldo: supplied by vcc-dram [ 2.850968] tv: Bringing 700000uV into 3300000-3300000uV [ 2.856981] tv: supplied by regulator-dummy [ 2.861846] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.868219] aldo2: supplied by regulator-dummy [ 2.874033] avcc-pll: supplied by regulator-dummy [ 2.880566] eldo1: supplied by regulator-dummy [ 2.887197] eldo2: supplied by regulator-dummy [ 2.892604] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.899704] vcc-pe: supplied by regulator-dummy [ 2.904929] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.911997] vcc-sd-alt: supplied by regulator-dummy [ 2.917835] dldo2: supplied by regulator-dummy [ 2.924383] dldo3: supplied by regulator-dummy [ 2.931076] dldo4: supplied by regulator-dummy [ 2.936682] rtc_ldo: supplied by regulator-dummy [ 2.941870] random: fast init done [ 2.946743] ldo_io0: supplied by regulator-dummy [ 2.952978] ldo_io1: supplied by regulator-dummy [ 2.958899] axp20x-adc axp22x-adc: DMA mask not set [ 2.965886] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 2.976971] axp20x-i2c 0-0034: AXP20X driver loaded [ 2.983744] i2c i2c-1: using pinctrl states for GPIO recovery [ 2.989950] gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 2.998887] i2c i2c-1: using generic GPIOs for recovery [ 3.037599] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 3.045283] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 1500000) is a Allwinner sun4i [ 3.055841] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 3.059205] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 3.063866] libphy: sun4i_mii_bus: probed [ 3.155276] mmc0: new DDR MMC card at address 0001 [ 3.160992] mmcblk0: mmc0:0001 MMC64G 58.2 GiB [ 3.165928] mmcblk0boot0: mmc0:0001 MMC64G partition 1 4.00 MiB [ 3.172324] mmcblk0boot1: mmc0:0001 MMC64G partition 2 4.00 MiB [ 3.178599] mmcblk0rpmb: mmc0:0001 MMC64G partition 3 4.00 MiB, chardev (246:0) [ 3.189371] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 3.220292] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:e6:69 [ 3.229495] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 3.235856] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 3.242233] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 3.248336] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 3.255561] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 3.262811] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 3.267799] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 3.274584] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 3.280255] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 3.286596] libphy: stmmac: probed [ 3.549051] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.554661] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.562876] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 3.596572] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.603650] hub 1-0:1.0: USB hub found [ 3.607545] hub 1-0:1.0: 1 port detected [ 3.612714] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.618351] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.626348] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 3.656572] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.663579] hub 2-0:1.0: USB hub found [ 3.667432] hub 2-0:1.0: 1 port detected [ 3.672516] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.678146] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.686133] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.716962] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.723909] hub 3-0:1.0: USB hub found [ 3.727760] hub 3-0:1.0: 1 port detected [ 3.826658] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.833294] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.841279] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 3.921418] hub 4-0:1.0: USB hub found [ 3.925223] hub 4-0:1.0: 1 port detected [ 3.930346] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 3.937015] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 3.944927] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 4.021416] hub 5-0:1.0: USB hub found [ 4.025232] hub 5-0:1.0: 1 port detected [ 4.030356] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.037036] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 4.044830] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.052067] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 4.131484] hub 6-0:1.0: USB hub found [ 4.135291] hub 6-0:1.0: 1 port detected [ 4.148350] of_cfs_init [ 4.150928] of_cfs_init: OK [ 4.154439] ALSA device list: [ 4.157462] No soundcards found. [ 4.168833] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 4.189201] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 4.196521] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.294962] EXT4-fs (mmcblk0p2): recovery complete [ 4.300727] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.308940] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.316427] devtmpfs: mounted [ 4.324224] Freeing unused kernel memory: 1024K [ 4.329031] Run /sbin/init as init process [ 4.582004] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.606149] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.637855] systemd[1]: Set hostname to . [ 4.824282] systemd-sysv-generator[124]: Overwriting existing symlink /run/systemd/generator.late/xiot.service with real service. [ 5.423908] systemd[1]: Queued start job for default target Graphical Interface. [ 5.433201] random: systemd: uninitialized urandom read (16 bytes read) [ 5.443966] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.476864] random: systemd: uninitialized urandom read (16 bytes read) [ 5.485448] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.526866] random: systemd: uninitialized urandom read (16 bytes read) [ 5.535587] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.578603] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.618405] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.657257] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password ts to Console Directory Watch. [ 5.697078] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Ruests to Wall Directory Watch. [ 5.737147] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.749271] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.787133] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.816822] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.856767] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.887990] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.927212] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 5.977994] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 5.987318] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.027868] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.064347] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.097602] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.137761] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.151781] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.192648] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.232802] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.273208] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 6.315259] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of stodes for the current kernel... [ 6.363899] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.403869] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.427964] fuse: init (API version 7.32) [ 6.439310] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.455375] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.508313] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.523919] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.538667] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.561574] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 6.570041] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 6.580996] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System 6.592409] systemd[1]: Mounted Kernel Trace File System. m. [ OK ] Mounted Kernel Trace File System. [ 6.659894] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st nodes for the current kernel. [ 6.710872] systemd[1]: modprobe@drm.service: Succeeded. [ 6.717976] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.758752] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.765876] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 6.808140] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 7.047806] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Managefor Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 8.017594] Driver for 1-wire Dallas network protocol. [ 8.258124] usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator [ 8.329420] wbec-watchdog wbec-watchdog.3.auto: DMA mask not set [ 8.368498] wbec-gpio wbec-gpio.2.auto: DMA mask not set [ 8.373163] wbec-adc wbec-adc.1.auto: DMA mask not set [ 8.383966] wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set [ 8.390184] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0 [ 8.404082] iio-rescale vin-volt: using raw+scale source channel [ 8.411670] iio-rescale v33-volt: using raw+scale source channel [ 8.438041] wbec-power wbec-power.6.auto: DMA mask not set [ 8.467603] iio-rescale v50-volt: using raw+scale source channel [ 8.496207] Bluetooth: Core ver 2.22 [ 8.500005] NET: Registered protocol family 31 [ 8.504473] Bluetooth: HCI device and connection manager initialized [ 8.510977] Bluetooth: HCI socket layer initialized [ 8.511808] iio-rescale vbus-debug-volt: using raw+scale source channel [ 8.515920] Bluetooth: L2CAP socket layer initialized [ 8.527709] Bluetooth: SCO socket layer initialized [ 8.562638] usbcore: registered new interface driver btusb [ 8.567617] iio-rescale vbus-network-volt: using raw+scale source channel [ 8.596327] iio-rescale a1-volt: using raw+scale source channel [ 8.604096] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.621571] iio-rescale a2-volt: using raw+scale source channel [ 8.627880] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723 [ 8.639667] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 8.645710] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin [ 8.655708] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin [ 8.663443] Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507 [ 8.681251] iio-rescale a3-volt: using raw+scale source channel [ 8.703874] iio-rescale a4-volt: using raw+scale source channel [ 8.715632] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.733820] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ OK ] Found device /dev/ttyS0. [ 8.984274] RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e [ 8.991511] RTW: rtl8733bu BT-Coex version = COEX20230616-330e [ 8.997954] RTW: [HALMAC]138 [ 8.997954] HALMAC_MAJOR_VER = 1 [ 8.997954] HALMAC_PROTOTYPE_VER = 6 [ 8.997954] HALMAC_MINOR_VER = 6 [ 8.997954] HALMAC_PATCH_VER = 42 [ OK ] Found device /dev/mmcblk0p5. [ 9.108504] Bluetooth: hci0: RTL: fw version 0xd9b80b4f [ OK ] Found device /dev/mmcblk0p6. [ 9.378289] RTW: rtw_rfctl_decide_init_chplan chplan:0x7F [ 9.400858] RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:8f:66 [ 9.409069] RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:8f:66 [ 9.417395] usbcore: registered new interface driver rtl8733bu [ 9.462005] RTW: rtw_set_country_cmd country_code:"KZ" [ 9.467263] RTW: default domain:0x5e applied, txpwr_lmt:?ETSI [ 9.473038] RTW: world wide applied, txpwr_lmt:WW [ 9.552648] RTW: rtw_set_country_cmd country_code:"KZ" [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... Starting Load/Save RF Kill Switch Status... [ 9.826693] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 10.026996] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 10.218598] systemd-journald[139]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config files... [ 10.237568] systemd-journald[139]: File /var/log/journal/944526795c184961912f4c4e38a0f0b5/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 10.327905] random: crng init done [ 10.331345] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onliata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Remove Stale Onlit4 Metadata Check Snapshots... Starting Authorization Manager... Starting User Login Management... [ 12.024833] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.030278] Bluetooth: BNEP filters: protocol multicast [ OK ] Started watch config files. [ 12.035568] Bluetooth: BNEP socket layer initialized Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ OK ] Finished Remove Stale Onliext4 Metadata Check Snapshots. [ OK ] Started Authorization Manager. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Bluetooth service. [ OK ] Started WPA supplicant. [ OK ] Started User Login Management. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. [ 18.165433] mcp230xx 1-0020: error -ENXIO: can't write IOCON 32 [ 18.352553] mcp230xx 1-0021: error -ENXIO: can't write IOCON 33 [ 18.923963] gpio-266 (mod3_i2c): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 18.933639] gpio-267 (mod3_i2c): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 25.976610] i2c-gpio mod3_i2c: using lines 266 (SDA) and 267 (SCL) [ 26.911243] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 131, base_baud = 1500000) is a Allwinner sun4i [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ INFO ] Skipped Power on GSM modem. [ OK ] Reached target Network (Pre). Starting Network Manager... Starting Raise network interfaces... [ OK ] Finished Raise network interfaces. [ 34.416725] vcc-gmac-phy: disabling [ 34.420626] dc5ldo: disabling [ 34.424007] dldo4: disabling [ 34.427380] vdd-sd-power: disabling [ 34.430914] vcc-sd: disabling [ 34.433904] mod1_pimux_dummy: disabling [ 34.437878] mod2_pimux_dummy: disabling [ OK ] Started Network Manager. [ OK ] Reached target Network. Starting Network Manager Wait Online... Starting dnsmasq - A lightDHCP and caching DNS server... Starting Access point and rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Starting Tailscale node agent... [ OK ] Started Network connectionrvice for Wiren Board devices. Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ 35.520778] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 35.542435] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 35.549905] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 35.557697] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ OK ] Started KNX Daemon. [ 35.595982] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ INFO ] Skipped dnsmasq - A lightwt DHCP and caching DNS server. [ OK ] Finished KNXD Configurator for Wiren Board. [ INFO ] Skipped Access point and aserver for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [ OK ] Reached target Host and Network Name Lookups. Starting Network Manager Script Dispatcher Service... [ OK ] Started Getty on tty1. Starting A high performanc and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of se-tree (with opposite sign)... [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Finished Compensation of sice-tree (with opposite sign). [ OK ] Started MQTT Driver for GPIO-controlled switches. [ 36.732494] RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384) [ OK ] Started Mosquitto MQTT Broker. [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost generating archive with data. [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. Starting Wiren Board MQTT to IEC 60870-5-104 gateway... [ OK ] Started Wiren Board MQTT KNX bridge. [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board MQTT to Modbus gateway. [ OK ] Started metrics sender.. [ OK ] Started Virtual MQTT devicr Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started MQTT Rule engine for Wiren Board. [ OK ] Started Wiren Board firmware update service. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Tailscale node agent. [ 37.938247] tun: Universal TUN/TAP device driver, 1.6 [ OK ] Started A high performanceer and a reverse proxy server. Starting Initialize Wiren Board on successful boot... Starting USB Debug Network... Debian GNU/Linux 11 wirenboard-ALBFXAYW ttyS0 wirenboard-ALBFXAYW login: [ 43.147041] Mass Storage Function, version: 2009/09/11 [ 43.152250] LUN: removable file: (no medium) [ 43.235242] using random self ethernet address [ 43.240398] using random host ethernet address [ 43.457666] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 43.462386] dbg0: MAC 1a:55:89:a2:69:43 [ 50.117566] process '/usr/sbin/netplugd' started with executable stack [EC] Watchdog is timed out, reset power. U-Boot SPL 2021.10-wb1.7.2-gbf311aa30b (Sep 23 2023 - 11:10:21 +0000) DRAM: 2048 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.2-gbf311aa30b (Sep 23 2023 - 11:10:21 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 2 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 1 ms (318.4 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502352 bytes read in 171 ms (36.3 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57964 bytes read in 6 ms (9.2 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-commercial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x6337d0 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb173 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Nov 19 12:20:02 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0xbec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 2043848K/2097152K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 36920K reserved, 16384K cma-reserved, 1294324K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000023] Switching to timer-based delay loop, resolution 41ns [ 0.000390] Console: colour dummy device 80x30 [ 0.000466] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000496] pid_max: default: 32768 minimum: 301 [ 0.000742] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000769] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003414] CPU: Testing write buffer coherency: ok [ 0.003995] /cpus/cpu@0 missing clock-frequency property [ 0.004059] /cpus/cpu@1 missing clock-frequency property [ 0.004120] /cpus/cpu@2 missing clock-frequency property [ 0.004186] /cpus/cpu@3 missing clock-frequency property [ 0.004210] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005503] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.005720] rcu: Hierarchical SRCU implementation. [ 0.007254] smp: Bringing up secondary CPUs ... [ 0.019443] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031233] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.042689] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.042923] smp: Brought up 1 node, 4 CPUs [ 0.042967] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.042983] CPU: All CPU(s) started in HYP mode. [ 0.042999] CPU: Virtualization extensions available. [ 0.044284] devtmpfs: initialized [ 0.066167] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.066480] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.066515] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.068981] pinctrl core: initialized pinctrl subsystem [ 0.070976] NET: Registered protocol family 16 [ 0.075627] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.077073] thermal_sys: Registered thermal governor 'step_wise' [ 0.077729] No ATAGs? [ 0.078667] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.078715] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.162696] SCSI subsystem initialized [ 0.163105] usbcore: registered new interface driver usbfs [ 0.163186] usbcore: registered new interface driver hub [ 0.163273] usbcore: registered new device driver usb [ 0.163726] mc: Linux media interface: v0.10 [ 0.163800] videodev: Linux video capture interface: v2.00 [ 0.163883] pps_core: LinuxPPS API ver. 1 registered [ 0.163899] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.163931] PTP clock support registered [ 0.164239] Advanced Linux Sound Architecture Driver Initialized. [ 0.166465] clocksource: Switched to clocksource arch_sys_counter [ 1.244186] NET: Registered protocol family 2 [ 1.245253] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.245315] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.245406] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.245540] TCP: Hash tables configured (established 8192 bind 8192) [ 1.245709] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.245784] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.246044] NET: Registered protocol family 1 [ 1.248468] RPC: Registered named UNIX socket transport module. [ 1.248507] RPC: Registered udp transport module. [ 1.248529] RPC: Registered tcp transport module. [ 1.248551] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.250648] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.253730] Initialise system trusted keyrings [ 1.254153] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.267939] NFS: Registering the id_resolver key type [ 1.268000] Key type id_resolver registered [ 1.268014] Key type id_legacy registered [ 1.425848] Key type asymmetric registered [ 1.425877] Asymmetric key parser 'x509' registered [ 1.426035] bounce: pool size: 64 pages [ 1.426110] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.426129] io scheduler mq-deadline registered [ 1.426142] io scheduler kyber registered [ 1.428845] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.468157] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.491241] brd: module loaded [ 1.508408] loop: module loaded [ 1.518262] libphy: Fixed MDIO Bus: probed [ 1.520187] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.521664] libphy: sun4i_mii_bus: probed [ 1.524259] CAN device driver interface [ 1.528488] PPP generic driver version 2.4.2 [ 1.528805] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.528827] ehci-platform: EHCI generic platform driver [ 1.529945] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.529980] ohci-platform: OHCI generic platform driver [ 1.532677] usbcore: registered new interface driver usb-storage [ 1.532854] usbcore: registered new interface driver usbserial_generic [ 1.532918] usbserial: USB Serial support registered for generic [ 1.535408] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 1.535430] sun6i-rtc 1c20400.rtc: RTC enabled [ 1.537443] i2c /dev entries driver [ 1.548150] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.552643] ledtrig-cpu: registered to indicate activity on CPUs [ 1.554263] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.554779] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.555494] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.555766] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.556019] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.556208] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 1.556554] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 1.556779] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 1.556990] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 1.557218] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 1.560929] usbcore: registered new interface driver usbhid [ 1.560953] usbhid: USB HID core driver [ 1.570787] Initializing XFRM netlink socket [ 1.571828] NET: Registered protocol family 10 [ 1.573128] Segment Routing with IPv6 [ 1.573277] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.574482] NET: Registered protocol family 17 [ 1.574617] can: controller area network core [ 1.574979] NET: Registered protocol family 29 [ 1.575025] can: raw protocol [ 1.575067] can: broadcast manager protocol [ 1.575127] can: netlink gateway - max_hops=1 [ 1.575486] can: SAE J1939 [ 1.576059] Key type dns_resolver registered [ 1.576195] Registering SWP/SWPB emulation handler [ 1.576365] registered taskstats version 1 [ 1.576636] Loading compiled-in X.509 certificates [ 1.609037] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.616096] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.617122] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.623094] printk: console [ttyS0] disabled [ 1.623968] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 2.569596] printk: console [ttyS0] enabled [ 2.576058] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.582913] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.589562] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.596922] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.607669] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.625968] wbec-rtc wbec-rtc.4.auto: DMA mask not set [ 2.632756] wbec-rtc wbec-rtc.4.auto: registered as rtc0 [ 2.638373] wbec-rtc wbec-rtc.4.auto: setting system clock to 2025-07-02T11:33:53 UTC (1751456033) [ 2.651089] wbec spi0.0: WBEC device added [ 2.657221] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.665359] libphy: sun4i_mii_bus: probed [ 2.670653] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.677712] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.684380] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.695271] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.702117] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.708766] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.716283] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.726933] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.735570] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.742383] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.748968] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.756307] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.766683] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.785639] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.804736] vcc-3v3: supplied by regulator-dummy [ 2.810881] vdd-cpu: supplied by regulator-dummy [ 2.816748] vdd-sys: supplied by regulator-dummy [ 2.822537] dcdc4: supplied by regulator-dummy [ 2.828236] vcc-dram: supplied by regulator-dummy [ 2.833161] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.840202] vcc-gmac-phy: supplied by vcc-3v3 [ 2.845772] dc5ldo: supplied by vcc-dram [ 2.850384] tv: Bringing 700000uV into 3300000-3300000uV [ 2.856425] tv: supplied by regulator-dummy [ 2.861302] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.867685] aldo2: supplied by regulator-dummy [ 2.873535] avcc-pll: supplied by regulator-dummy [ 2.879687] eldo1: supplied by regulator-dummy [ 2.886186] eldo2: supplied by regulator-dummy [ 2.891966] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.899068] vcc-pe: supplied by regulator-dummy [ 2.904308] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.911384] vcc-sd-alt: supplied by regulator-dummy [ 2.917261] dldo2: supplied by regulator-dummy [ 2.922701] dldo3: supplied by regulator-dummy [ 2.928141] dldo4: supplied by regulator-dummy [ 2.933187] rtc_ldo: supplied by regulator-dummy [ 2.938261] random: fast init done [ 2.942319] ldo_io0: supplied by regulator-dummy [ 2.948232] ldo_io1: supplied by regulator-dummy [ 2.953839] axp20x-adc axp22x-adc: DMA mask not set [ 2.960690] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 2.971536] axp20x-i2c 0-0034: AXP20X driver loaded [ 2.979073] i2c i2c-1: using pinctrl states for GPIO recovery [ 2.984976] gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 2.994158] i2c i2c-1: using generic GPIOs for recovery [ 3.058495] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 3.066218] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 1500000) is a Allwinner sun4i [ 3.076746] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 3.079059] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 3.084713] libphy: sun4i_mii_bus: probed [ 3.179863] mmc0: new DDR MMC card at address 0001 [ 3.185556] mmcblk0: mmc0:0001 MMC64G 58.2 GiB [ 3.190531] mmcblk0boot0: mmc0:0001 MMC64G partition 1 4.00 MiB [ 3.196990] mmcblk0boot1: mmc0:0001 MMC64G partition 2 4.00 MiB [ 3.203223] mmcblk0rpmb: mmc0:0001 MMC64G partition 3 4.00 MiB, chardev (246:0) [ 3.213999] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 3.240144] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:e6:69 [ 3.249350] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 3.255711] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 3.262125] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 3.268216] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 3.275441] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 3.282688] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 3.287675] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 3.294460] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 3.300128] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 3.306472] libphy: stmmac: probed [ 3.568889] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.574498] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.582784] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 3.616430] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.623530] hub 1-0:1.0: USB hub found [ 3.627391] hub 1-0:1.0: 1 port detected [ 3.632546] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.638190] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.646178] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 3.676432] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.683452] hub 2-0:1.0: USB hub found [ 3.687295] hub 2-0:1.0: 1 port detected [ 3.692376] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.697992] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.705963] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.736877] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.743868] hub 3-0:1.0: USB hub found [ 3.747699] hub 3-0:1.0: 1 port detected [ 3.846524] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.853160] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.861144] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 3.941294] hub 4-0:1.0: USB hub found [ 3.945178] hub 4-0:1.0: 1 port detected [ 3.950333] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 3.957004] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 3.964922] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 4.041302] hub 5-0:1.0: USB hub found [ 4.045112] hub 5-0:1.0: 1 port detected [ 4.050251] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.056918] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 4.064857] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 4.070925] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.141330] hub 6-0:1.0: USB hub found [ 4.145135] hub 6-0:1.0: 1 port detected [ 4.158098] of_cfs_init [ 4.160673] of_cfs_init: OK [ 4.164168] ALSA device list: [ 4.167181] No soundcards found. [ 4.179764] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 4.200279] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 4.207669] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.328744] EXT4-fs (mmcblk0p2): recovery complete [ 4.334472] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.342687] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.350203] devtmpfs: mounted [ 4.358035] Freeing unused kernel memory: 1024K [ 4.362807] Run /sbin/init as init process [ 4.615316] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.639555] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.677762] systemd[1]: Set hostname to . [ 4.887830] systemd-sysv-generator[124]: Overwriting existing symlink /run/systemd/generator.late/xiot.service with real service. [ 5.496589] systemd[1]: Queued start job for default target Graphical Interface. [ 5.505826] random: systemd: uninitialized urandom read (16 bytes read) [ 5.516938] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.556703] random: systemd: uninitialized urandom read (16 bytes read) [ 5.565210] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.606670] random: systemd: uninitialized urandom read (16 bytes read) [ 5.615376] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.658415] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.698254] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.737106] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password ts to Console Directory Watch. [ 5.776934] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Ruests to Wall Directory Watch. [ 5.816963] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.829039] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.867054] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.896715] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.936662] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.967873] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 6.007085] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 6.057783] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.067094] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.107725] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.154215] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.187455] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.227617] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.241689] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.282991] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.322660] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.363114] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 6.404763] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of stodes for the current kernel... [ 6.454067] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.503683] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.527439] fuse: init (API version 7.32) [ 6.539247] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.555212] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.608229] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.624024] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.639111] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.661636] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 6.669189] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 6.680453] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System 6.691927] systemd[1]: Mounted Kernel Trace File System. m. [ OK ] Mounted Kernel Trace File System 6.704338] systemd[1]: Finished Create list of static device nodes for the current kernel. m. [ OK ] Finished Create list of st nodes for the current kernel. [ 6.780135] systemd[1]: modprobe@drm.service: Succeeded. [ 6.787223] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.839404] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.846306] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 6.887500] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 7.137520] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Managefor Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 8.139295] Driver for 1-wire Dallas network protocol. [ 8.373313] usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator [ 8.455853] wbec-adc wbec-adc.1.auto: DMA mask not set [ 8.467014] iio-rescale vin-volt: using raw+scale source channel [ 8.471595] wbec-power wbec-power.6.auto: DMA mask not set [ 8.481618] iio-rescale v33-volt: using raw+scale source channel [ 8.487110] wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set [ 8.490652] wbec-gpio wbec-gpio.2.auto: DMA mask not set [ 8.493577] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0 [ 8.498881] iio-rescale v50-volt: using raw+scale source channel [ 8.515719] wbec-watchdog wbec-watchdog.3.auto: DMA mask not set [ 8.517156] iio-rescale vbus-debug-volt: using raw+scale source channel [ 8.544965] iio-rescale vbus-network-volt: using raw+scale source channel [ 8.553041] iio-rescale a1-volt: using raw+scale source channel [ 8.561237] iio-rescale a2-volt: using raw+scale source channel [ 8.574945] iio-rescale a3-volt: using raw+scale source channel [ 8.591783] iio-rescale a4-volt: using raw+scale source channel [ 8.713717] Bluetooth: Core ver 2.22 [ 8.715110] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.717435] NET: Registered protocol family 31 [ 8.729626] Bluetooth: HCI device and connection manager initialized [ 8.736043] Bluetooth: HCI socket layer initialized [ 8.741134] Bluetooth: L2CAP socket layer initialized [ 8.746259] Bluetooth: SCO socket layer initialized [ 8.771629] usbcore: registered new interface driver btusb [ 8.783373] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.809060] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 8.833600] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723 [ 8.843493] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 8.849655] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin [ 8.883166] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin [ OK ] Found device /dev/mmcblk0p6. [ OK ] Found device /dev/mmcblk0p5. [ 9.014633] Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507 [ 9.196638] RTW: rtl8733bu v5.15.12-126-gb999e6008.20240911_COEX20230616-330e [ 9.203804] RTW: rtl8733bu BT-Coex version = COEX20230616-330e [ 9.211269] RTW: [HALMAC]138 [ 9.211269] HALMAC_MAJOR_VER = 1 [ 9.211269] HALMAC_PROTOTYPE_VER = 6 [ 9.211269] HALMAC_MINOR_VER = 6 [ 9.211269] HALMAC_PATCH_VER = 42 [ OK ] Found device /dev/ttyS0. [ 9.481325] Bluetooth: hci0: RTL: fw version 0xd9b80b4f [ 9.580902] RTW: rtw_rfctl_decide_init_chplan chplan:0x7F [ 9.591586] RTW: rtw_set_country_cmd country_code:"KZ" [ 9.596913] RTW: default domain:0x5e applied, txpwr_lmt:?ETSI [ 9.602667] RTW: world wide applied, txpwr_lmt:WW [ 9.609385] RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:b1:8f:66 [ OK ] Reached target Hardware activated U[ 9.617627] RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:b1:8f:66 SB gadget. [ 9.630160] usbcore: registered new interface driver rtl8733bu [ OK ] Listening on Load/Save RF itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... [ 9.807935] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. Starting Load/Save RF Kill Switch Status... [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 10.077081] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 10.288672] systemd-journald[138]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config[ 10.305345] systemd-journald[138]: File /var/log/journal/944526795c184961912f4c4e38a0f0b5/system.journal corrupted or uncleanly shut down, renaming and replacing. files... [ 10.406537] random: crng init done [ 10.409985] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onliata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Remove Stale Onlit4 Metadata Check Snapshots... Starting Authorization Manager... Starting User Login Management... [ 12.154127] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.159582] Bluetooth: BNEP filters: protocol multicast [ 12.164837] Bluetooth: BNEP socket layer initialized [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ OK ] Finished Remove Stale Onliext4 Metadata Check Snapshots. [ OK ] Started Bluetooth service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Authorization Manager. [ OK ] Started WPA supplicant. [ OK ] Started User Login Management. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. [ 18.385509] mcp230xx 1-0020: error -ENXIO: can't write IOCON 32 [ 18.576300] mcp230xx 1-0021: error -ENXIO: can't write IOCON 33 [ 19.158220] gpio-266 (mod3_i2c): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 19.167854] gpio-267 (mod3_i2c): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 26.216461] i2c-gpio mod3_i2c: using lines 266 (SDA) and 267 (SCL) [ 27.144555] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 131, base_baud = 1500000) is a Allwinner sun4i [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ INFO ] Skipped Power on GSM modem. [ OK ] Reached target Network (Pre). Starting Network Manager... Starting Raise network interfaces... [ 34.406600] vcc-gmac-phy: disabling [ 34.410525] dc5ldo: disabling [ 34.413951] dldo4: disabling [ 34.417397] vdd-sd-power: disabling [ 34.420953] vcc-sd: disabling [ 34.423941] mod1_pimux_dummy: disabling [ 34.427937] mod2_pimux_dummy: disabling [ OK ] Finished Raise network interfaces. [ OK ] Started Network Manager. [ OK ] Reached target Network. Starting Network Manager Wait Online... Starting dnsmasq - A lightDHCP and caching DNS server... Starting Access point and rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Starting Tailscale node agent... [ OK ] Started Network connectionrvice for Wiren Board devices. Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started KNX Daemon. [ INFO ] Skipped dnsmasq - A lightwt DHCP and caching DNS server. [ 35.797914] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 35.814458] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 35.822057] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 35.829866] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 35.841354] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ OK ] Finished KNXD Configurator for Wiren Board. [ INFO ] Skipped Access point and aserver for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [ OK ] Reached target Host and Network Name Lookups. Starting Network Manager Script Dispatcher Service... [ OK ] Started Getty on tty1. Starting A high performanc and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of se-tree (with opposite sign)... [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Finished Compensation of sice-tree (with opposite sign). [ OK ] Started MQTT Driver for GPIO-controlled switches. [ 37.063542] RTW: start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384) [ OK ] Started Mosquitto MQTT Broker. [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost generating archive with data. [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. Starting Wiren Board MQTT to IEC 60870-5-104 gateway... [ OK ] Started Wiren Board MQTT KNX bridge. [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board MQTT to Modbus gateway. [ OK ] Started metrics sender.. [ OK ] Started Virtual MQTT devicr Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started MQTT Rule engine for Wiren Board. [ OK ] Started Wiren Board firmware update service. [ 38.136225] tun: Universal TUN/TAP device driver, 1.6 [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Tailscale node agent. [ OK ] Started A high performanceer and a reverse proxy server. Starting Initialize Wiren Board on successful boot... Starting USB Debug Network... Debian GNU/Linux 11 wirenboard-ALBFXAYW ttyS0 wirenboard-ALBFXAYW login: [ 43.634007] Mass Storage Function, version: 2009/09/11 [ 43.639746] LUN: removable file: (no medium) [ 43.673798] using random self ethernet address [ 43.678405] using random host ethernet address [ 43.833793] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 43.838521] dbg0: MAC 1a:55:89:a2:69:43 Error reading from serial device Session stopped - Press to exit tab - Press R to restart session - Press S to save terminal output to file Session stopped - Press to exit tab - Press R to restart session - Press S to save terminal output to file