CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 51C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial EEPROM #0 MAC: 04:91:62:c2:94:4f EEPROM #1 MAC: 04:91:62:c2:31:e0 Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 0 Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found No storage devices, perhaps not 'usb start'ed..? No USB update detected, continuing boot switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 323 bytes read in 60 ms (4.9 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 5127648 bytes read in 344 ms (14.2 MiB/s) MMC read: dev # 0, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt imx6ul-wirenboard660 44588 bytes read in 419 ms (103.5 KiB/s) 670 bytes read in 102 ms (5.9 KiB/s) Applying DT overlay wb6-gsm-sim800 597 bytes read in 137 ms (3.9 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu 509 bytes read in 166 ms (2.9 KiB/s) Applying DT overlay wb6-noradio 334 bytes read in 104 ms (2.9 KiB/s) Applying DT overlay wb6-eth1 254 bytes read in 117 ms (2 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x82000000 [ 0x000000 - 0x4e3de0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 9ef33000, end 9ef55fff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.22-wb6 (root@wbdevenv) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #2 SMP Tue Mar 9 09:47:37 UTC 2021 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Wiren Board rev. 6.6.0 (i.MX6UL/ULL) [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] percpu: Embedded 14 pages/cpu @cefc8000 s25996 r8192 d23156 u57344 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait ro [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 491720K/524288K available (6144K kernel code, 312K rwdata, 2280K rodata, 1024K init, 342K bss, 16184K reserved, 16384K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xb0000000 - 0xd0000000 ( 512 MB) [ 0.000000] modules : 0xaf000000 - 0xb0000000 ( 16 MB) [ 0.000000] .text : 0xb0008000 - 0xb0700000 (7136 kB) [ 0.000000] .init : 0xb0a00000 - 0xb0b00000 (1024 kB) [ 0.000000] .data : 0xb0b00000 - 0xb0b4e140 ( 313 kB) [ 0.000000] .bss : 0xb0b50000 - 0xb0ba5aec ( 343 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000057] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002568] Console: colour dummy device 80x30 [ 0.002608] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002640] pid_max: default: 32768 minimum: 301 [ 0.002910] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002938] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.004413] CPU: Testing write buffer coherency: ok [ 0.004986] /cpus/cpu@0 missing clock-frequency property [ 0.005025] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005083] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.007723] Brought up 1 CPUs [ 0.007755] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.007771] CPU: All CPU(s) started in SVC mode. [ 0.009263] devtmpfs: initialized [ 0.035940] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.036704] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.036754] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.038150] pinctrl core: initialized pinctrl subsystem [ 0.040697] NET: Registered protocol family 16 [ 0.042613] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.045506] cpuidle: using governor menu [ 0.080582] No ATAGs? [ 0.080638] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.080662] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.083018] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.128978] mxs-dma 1804000.dma-apbh: initialized [ 0.133823] SCSI subsystem initialized [ 0.134450] usbcore: registered new interface driver usbfs [ 0.134605] usbcore: registered new interface driver hub [ 0.134868] usbcore: registered new device driver usb [ 0.136559] i2c-gpio i2c_rtc: using pins 48 (SDA) and 49 (SCL) [ 0.137486] i2c-gpio i2c_eeprom1: using pins 76 (SDA) and 67 (SCL) [ 0.138387] i2c-gpio i2c_eeprom2: using pins 70 (SDA) and 71 (SCL) [ 0.139869] i2c i2c-1: IMX I2C adapter registered [ 0.139913] i2c i2c-1: can't use DMA, using PIO instead. [ 0.140265] Linux video capture interface: v2.00 [ 0.140423] pps_core: LinuxPPS API ver. 1 registered [ 0.140440] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.140494] PTP clock support registered [ 0.141251] Advanced Linux Sound Architecture Driver Initialized. [ 0.143928] clocksource: Switched to clocksource mxc_timer1 [ 0.169519] NET: Registered protocol family 2 [ 0.170775] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.170899] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.171056] TCP: Hash tables configured (established 4096 bind 4096) [ 0.171177] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.171235] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.171542] NET: Registered protocol family 1 [ 0.172464] RPC: Registered named UNIX socket transport module. [ 0.172496] RPC: Registered udp transport module. [ 0.172514] RPC: Registered tcp transport module. [ 0.172530] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.177454] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.197065] NFS: Registering the id_resolver key type [ 0.197130] Key type id_resolver registered [ 0.197148] Key type id_legacy registered [ 0.208080] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.208114] io scheduler noop registered (default) [ 0.208134] io scheduler deadline registered [ 0.208216] io scheduler cfq registered [ 0.214956] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.214999] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.224491] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 18, base_baud = 5000000) is a IMX [ 0.803313] console [ttymxc0] enabled [ 0.808932] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 55, base_baud = 5000000) is a IMX [ 0.819248] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 56, base_baud = 5000000) is a IMX [ 0.862627] imx_rngc 2284000.rngb: Freescale RNGC registered. [ 0.868769] [drm] Initialized [ 0.908653] brd: module loaded [ 0.928519] loop: module loaded [ 0.936805] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 0.948284] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 0.959133] libphy: Fixed MDIO Bus: probed [ 0.965837] 20b4000.ethernet supply phy not found, using dummy regulator [ 0.973870] pps pps0: new PPS source ptp0 [ 1.007850] libphy: fec_enet_mii_bus: probed [ 1.013545] fec 20b4000.ethernet eth0: registered PHC device 0 [ 1.134023] 2188000.ethernet supply phy not found, using dummy regulator [ 1.255048] pps pps1: new PPS source ptp1 [ 1.260317] libphy: fec_enet_mii_bus: probed [ 1.268481] fec 2188000.ethernet eth1: registered PHC device 1 [ 1.275079] PPP generic driver version 2.4.2 [ 1.279914] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.286601] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.292450] usbcore: registered new interface driver usb-storage [ 1.299089] usbcore: registered new interface driver usbserial [ 1.305236] usbcore: registered new interface driver usbserial_generic [ 1.311902] usbserial: USB Serial support registered for generic [ 1.318647] mousedev: PS/2 mouse device common for all mice [ 1.370027] rtc rtc0: invalid alarm value: 2022-2-8 38:1:0 [ 1.376195] rtc-pcf8563 4-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 1.392374] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 [ 1.401502] i2c /dev entries driver [ 1.415141] lm75 4-0048: hwmon0: sensor 'lm75b' [ 1.536115] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.544496] sdhci: Secure Digital Host Controller Interface driver [ 1.550720] sdhci: Copyright(c) Pierre Ossman [ 1.555177] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.624008] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.643607] ledtrig-cpu: registered to indicate activity on CPUs [ 1.668277] usbcore: registered new interface driver usbhid [ 1.676042] usbhid: USB HID core driver [ 1.702089] NET: Registered protocol family 10 [ 1.709408] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.717322] NET: Registered protocol family 17 [ 1.722002] Key type dns_resolver registered [ 1.731413] Registering SWP/SWPB emulation handler [ 1.738416] registered taskstats version 1 [ 1.761230] random: fast init done [ 1.768887] mmc0: new DDR MMC card at address 0001 [ 1.776015] imx_thermal 2000000.aips-bus:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 1.787004] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 1.791986] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 1.810882] rtc-pcf8563 4-0051: setting system clock to 2022-01-12 13:16:13 UTC (1641993373) [ 1.819378] of_cfs_init [ 1.822188] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 1.828708] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB [ 1.837817] of_cfs_init: OK [ 1.846337] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 1.851225] vdd3p0: disabling [ 1.858015] vref-3v3: disabling [ 1.861191] usb1_vbus: disabling [ 1.864546] ALSA device list: [ 1.867528] No soundcards found. [ 1.872064] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 1.881039] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 1.890861] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem [ 1.898305] EXT4-fs (mmcblk0p3): write access will be enabled during recovery [ 2.985370] EXT4-fs (mmcblk0p3): recovery complete [ 2.993308] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 3.001712] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 3.010273] devtmpfs: mounted [ 3.018804] Freeing unused kernel memory: 1024K (b0a00000 - b0b00000) [ 3.329480] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.363065] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 3.382448] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 3.425114] systemd[1]: Set hostname to . [ 3.792652] systemd-sysv-generator[127]: [/etc/init.d/wb-mqtt-knx:6] Could not build name for facility $remote_fs,: Invalid argument [ 4.157882] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.194755] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 4.250219] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 4.286502] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.325708] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 4.364537] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 4.399713] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ OK ] Listening on udev Kernel Socket. Mounting POSIX Message Queue File System... [ OK ] Listening on Journal Socket. Starting Load Kernel Modules... [ OK ] Created slice system-systemd\x2dfsck.slice. [ OK ] Reached target Remote File Systems. [ OK ] Created slice system-serial\x2dgetty.slice. Mounting Debug File System... [ OK ] Listening on udev Control Socket. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Listening on fsck to fsckd communication Socket. Starting File System Check on Root Device... Starting Create list of required st…ce nodes for the current kernel... Starting Journal Service... [ OK ] Created slice system-getty.slice. [ OK ] Reached target Encrypted Volumes. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Mounted /sys/kernel/config. [ OK ] Started Load Kernel Modules. [ OK ] Started File System Check on Root Device. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Journal Service. [ OK ] Started File System Check Daemon to report status. Starting Create Static Device Nodes in /dev... Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ OK ] Started Create Static Device Nodes in /dev. [ 5.490035] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Apply Kernel Variables. Starting udev Coldplug all Devices... Starting prepare partitions at first boot... Starting Load/Save Random Seed... Starting udev Kernel Device Manager... [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Kernel Device Manager. [ OK ] Started prepare partitions at first boot. [ OK ] Reached target Local File Systems (Pre). [ OK ] Started udev Coldplug all Devices. [ 7.527606] Driver for 1-wire Dallas network protocol. [ 7.537462] lirc_dev: IR Remote Control driver registered, major 245 [ 7.600413] lirc_pwm: module is from the staging directory, the quality is unknown, you have been warned. [ 7.699099] lirc_pwm lirc-rfm69: GPIO receiver on pin 77 [ 7.747502] lirc_pwm lirc-rfm69: lirc_dev: driver lirc-rfm69 registered at minor = 0 [ OK ] Found device /[ 7.814679] lirc_pwm lirc-rfm69: probed dev/ttymxc0. [ 7.998238] fec 20b4000.ethernet rename2: renamed from eth0 [ 8.330290] fec 2188000.ethernet eth0: renamed from eth1 [ 8.403043] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 8.422221] fec 20b4000.ethernet eth1: renamed from rename2 [ 8.442652] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 8.544091] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 8.572869] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.579801] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.587081] usb usb1: Product: EHCI Host Controller [ 8.591969] usb usb1: Manufacturer: Linux 4.9.22-wb6 ehci_hcd [ 8.597770] usb usb1: SerialNumber: ci_hdrc.0 [ 8.844250] hub 1-0:1.0: USB hub found [ 8.910176] hub 1-0:1.0: 1 port detected [ 8.977934] 2184200.usb supply vbus not found, using dummy regulator [ 9.081190] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 9.132446] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 9.184226] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 9.233666] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.240615] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.247920] usb usb2: Product: EHCI Host Controller [ 9.252809] usb usb2: Manufacturer: Linux 4.9.22-wb6 ehci_hcd [ 9.258595] usb usb2: SerialNumber: ci_hdrc.1 [ OK ] Found device /dev/mmcblk0p5. [ 9.491419] hub 2-0:1.0: USB hub found [ OK ] Found device /dev/mmcblk0p6. [ 9.561284] hub 2-0:1.0: 1 port detected [ 9.954093] usb 2-1: new high-speed USB device number 2 using ci_hdrc Starting File System Check on /dev/mmcblk0p6... Activating swap /dev/mmcblk0p5... [ 10.125384] Adding 262140k swap on /dev/mmcblk0p5. Priority:-1 extents:1 across:262140k SS [ 10.194769] usb 2-1: New USB device found, idVendor=0424, idProduct=2514 [ 10.201524] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ OK ] Activated swap /dev/mmcblk0p5. [ 10.232540] hub 2-1:1.0: USB hub found [ 10.237287] hub 2-1:1.0: 4 ports detected [ OK ] Reached target Swap. [ OK ] Started File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 10.497165] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /mnt/data. Mounting /var/log... [ 10.564129] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ OK ] Mounted /var/log. Starting Flush Journal to Persistent Storage... [ OK ] Reached target Local File Systems. Starting prepare mounts and symlinks to config files... [ 10.736164] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720 [ 10.743109] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.750605] usb 2-1.1: Product: 802.11n WLAN Adapter [ 10.755635] usb 2-1.1: Manufacturer: Realtek [ 10.759923] usb 2-1.1: SerialNumber: 00e04c000001 [ 10.825404] systemd-journald[153]: Received request to flush runtime journal from PID 1 [ 10.896510] systemd-journald[153]: File /var/log/journal/1e4e593c25897ec9fafaf4305fbb10f6/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 11.037163] Bluetooth: Core ver 2.22 [ 11.040851] NET: Registered protocol family 31 [ 11.045434] Bluetooth: HCI device and connection manager initialized [ OK ] Listening on Load/Save RF Kill Switch Status /[ 11.125884] Bluetooth: HCI socket layer initialized dev/rfkill Watch. [ 11.160933] Bluetooth: L2CAP socket layer initialized [ 11.180049] Bluetooth: SCO socket layer initialized Starting Load/Save RF Kill Switch Status... [ 11.270742] usbcore: registered new interface driver btusb [ 11.278569] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 11.287363] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin [ 11.330469] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 11.339755] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin [ 11.346329] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin [ 11.361546] Bluetooth: hci0: rom_version status=0 version=1 [ 11.367361] Bluetooth: cfg_sz 0, total size 22496 [ OK ] Started Load/Save RF Kill Switch Status. [ 15.458535] 8723bu: module is from the staging directory, the quality is unknown, you have been warned. [ 15.505715] RTL871X: module init start [ 15.509539] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 [ 15.516639] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ OK ] Started Flush Journal to Persistent Storage. [ 15.812207] RTL871X: rtw_ndev_init(wlan0) [ 15.826997] RTL871X: rtw_ndev_init(wlan1) [ 15.850357] usbcore: registered new interface driver rtl8723bu [ 15.856353] RTL871X: module init ret=0 [ 15.939321] usbcore: registered new interface driver rtl8xxxu [ OK ] Found device 802.11n_WLAN_Adapter. [ OK ] Started ifup for wlan0. [ OK ] Started prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Reached target System Time Synchronized. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. [ OK ] Started Daily apt download activities. [ OK ] Started Monitor directories with device templates for wb-mqtt-serial. [ OK ] Reached target Paths. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Reached target Basic System. [ OK ] Started Cgroup management daemon. Starting System Logging Service... [ OK ] Started Regular background program processing daemon. [ 17.744190] cgroup: new mount options do not match the existing superblock, will be ignored [ OK ] Started Generates wb-mqtt-serial UI schema for wb-mqtt-confed. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started watch config files. Starting Wiren Board MQTT to Modbus TCP gateway... Starting LSB: Hardware configuration with Device Tree overlays... Starting Mosquitto MQTT v3.1/v3.1.1 Broker... Starting Login Service... Starting Bluetooth service... Starting initialize filesystems at first boot... Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started D-Bus System Message Bus. [ 19.107740] RTL871X: RTW_ADAPTIVITY_EN_[ 19.111464] AUTO, chplan:0x20, Regulation:3,3 [ 19.115905] RTL871X: RTW_ADAPTIVITY_MODE_[ 19.119776] NORMAL [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Bluetooth service. [ OK ] Reached target Bluetooth. [ 19.338941] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.344378] Bluetooth: BNEP filters: protocol multicast [ 19.378740] Bluetooth: BNEP socket layer initialized [ OK ] Started System Logging Service. [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ OK ] Started initialize filesystems at first boot. [ OK ] Started Login Service. Starting Hostname Service... [ 21.034622] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ OK ] Started Mosquitto MQTT v3.1/v3.1.1 Broker. Starting LSB: MQTT driver for WB HomA for RFM69 ISM radio... Starting LSB: Firmware update monitor... [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board MQTT to OPC UA gateway. [ OK ] Started Hostname Service. [ OK ] Started LSB: Firmware update monitor. [ OK ] Started Wiren Board MQTT to Modbus TCP gateway. [ 24.775988] RTL871X: nolinked power save enter [ 27.739335] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 266, base_baud = 5000000) is a IMX [ 29.579147] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 267, base_baud = 5000000) is a IMX [ OK ] Started LSB: Hardware configuration with Device Tree overlays. [ OK ] Started MQTT Rule engine for Wiren Board. [ OK ] Started one-click diagnostic data c…ard, generating archive with data. Starting KNXD Configurator for Wiren Board... Starting LSB: initscript to use GSM modem integrated RTC... [ OK ] Started LSB: initscript to use GSM modem integrated RTC. Starting Raise network interfaces... [ OK ] Started Raise network interfaces. [ OK ] Reached target Network. [ OK ] Started Wiren Board journald to MQTT gateway. Starting KNX Daemon... [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started MQTT Driver for serial devices. Starting A high performance web server and a reverse proxy server... [ OK ] Started Wiren Board database logger. Starting dnsmasq - A lightweight DHCP and caching DNS server... Starting OpenVPN service... Starting MQTT Driver for GPIO-controlled switches... Starting MQTT Driver for ADC... Starting Permit User Sessions... Starting OpenBSD Secure Shell server... [ OK ] Started KNX Daemon. [ OK ] Started OpenVPN service. [ OK ] Started Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttymxc0. [ OK ] Reached target Login Prompts. [ OK ] Reached target Network is Online. Starting LSB: Start NTP daemon... Starting LSB: Advanced IEEE 802.11 management daemon... Starting LSB: Brings up/down network automatically... [ OK ] Started SprutHub. Starting LSB: : Wiren Board MQTT KNX bridge... [ OK ] Started OpenBSD Secure Shell server. Debian GNU/Linux 9 wirenboard-A7MAIUPU ttymxc0 wirenboard-A7MAIUPU login: master4x44-[ OK ] Stopped KNXD Configurator for Wiren Board. 4[ OK ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Stopped target Bluetooth. Stopping Bluetooth service... [ OK ] Stopped target Timers. [ OK ] Stopped Daily apt upgrade and clean activities. [ OK ] Stopped Daily apt download activities. [ OK ] Stopped target System Time Synchronized. Stopping Hostname Service... Stopping Wiren Board MQTT to Modbus TCP gateway... Stopping Regular background program processing daemon... Stopping Wiren Board journald to MQTT gateway... Stopping Wiren Board database logger... Stopping Wiren Board configuration editor backend... Stopping LSB: : Wiren Board MQTT KNX bridge... Stopping Wiren Board MQTT to OPC UA gateway... Stopping MQTT Driver for serial devices... Stopping OpenBSD Secure Shell server... Stopping LSB: MQTT driver for WB HomA for RFM69 ISM radio... Stopping System Logging Service... Stopping Cgroup management daemon... Stopping MQTT Rule engine for Wiren Board... [ OK ] Stopped OpenVPN service. Stopping D-Bus System Message Bus... Stopping Avahi mDNS/DNS-SD Stack... [ 51.035367] RTL871X: RTW_ADAPTIVITY_EN_[ 51.039090] AUTO, chplan:0x20, Regulation:3,3 [ 51.043462] RTL871X: RTW_ADAPTIVITY_MODE_[ 51.047460] NORMAL Stopping one-click diagnostic data …d, generating archive with data... Stopping LSB: Firmware update monitor... [ OK ] Stopped target Host and Network Name Lookups. Stopping dnsmasq - A lightweight DHCP and caching DNS server... Stopping Login Service... Stopping A high performance web server and a reverse proxy server... [ OK ] Stopped Daily Cleanup of Temporary Directories. Stopping SprutHub... [ OK ] Stopped target Login Prompts. Stoppin▒ Stopping Serial Getty on ttymxc0... Stopping Kernel 1-Wire MQTT driver for WB-HomA... [ OK ] Stopped Cgroup management daemon. [ OK ] Stopped System Logging Service. [ OK ] Stopped Regular background program processing daemon. [ OK ] Stopped Login Service. [ OK ] Stopped Bluetooth service. [ OK ] Stopped Avahi mDNS/DNS-SD Stack. [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped Hostname Service. [ OK ] Stopped Wiren Board configuration editor backend. [ OK ] Stopped Wiren Board MQTT to OPC UA gateway. [ OK ] Stopped Wiren Board MQTT to Modbus TCP gateway. [ OK ] Stopped MQTT Rule engine for Wiren Board. [ OK ] Stopped one-click diagnostic data c…ard, generating archive with data. [ OK ] Stopped Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Stopped MQTT Driver for GPIO-controlled switches. [ OK ] Stopped MQTT Driver for ADC. [ OK ] Stopped Getty on tty1. [ OK ] Stopped Serial Getty on ttymxc0. [ OK ] Stopped LSB: Advanced IEEE 802.11 management daemon. [ OK ] Stopped LSB: Brings up/down network automatically. [ OK ] Stopped SprutHub. [ OK ] Stopped OpenBSD Secure Shell server. [ OK ] Stopped LSB: board-specific initscript. [ OK ] Stopped A high performance web server and a reverse proxy server. [ 53.671437] RTL871X: nolinked power save leave [ OK ] Stopped LSB: MQTT driver for WB HomA for RFM69 ISM radio. [ OK ] Stopped LSB: Firmware update monitor. [ OK ] Stopped dnsmasq - A lightweight DHCP and caching DNS server. Stopping LSB: Start NTP daemon... [ OK ] Removed slice system-serial\x2dgetty.slice. [ OK ] Removed slice system-getty.slice. Stopping Permit User Sessions... [ OK ] Stopped Permit User Sessions. [ 54.400344] RTL871X: assoc success [ 54.404121] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ OK ] Stopped LSB: Start NTP daemon. [ OK ] Stopped target Network is Online. [ 54.624318] SMSC LAN8710/LAN8720 2188000.ethernet:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1) [ OK ] Stopped MQTT Driver for serial devices. [ 54.664559] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Stopping Generates wb-mqtt-serial UI schema for wb-mqtt-confed... [ OK ] Stopped Wiren Board journald to MQTT gateway. [ OK ] Stopped KNX Daemon. [ OK ] Stopped Wiren Board database logger. [ OK ] Stopped LSB: : Wiren Board MQTT KNX bridge. [ OK ] Stopped target Network. Stopping ifup for wlan0... Stopping Raise network interfaces... [ 55.024937] Micrel KSZ8081 or KSZ8091 2188000.ethernet:03: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet:03, irq=-1) Stopping Mosquitto MQTT v3.1/v3.1.1 Broker... [ 55.082665] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ OK ] Stopped Mosquitto MQTT v3.1/v3.1.1 Broker. [ OK ] Stopped target Remote File Systems. [ OK ] Started Wiren Board configuration editor backend. [ 56.724395] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 56.752615] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Stopped Generates wb-mqtt-serial UI schema for wb-mqtt-confed. [ OK ] Stopped ifup for wlan0. [ OK ] Stopped Raise network interfaces. Stopping LSB: initscript to use GSM modem integrated RTC... [ 90.325125] RTL871X: nolinked power save enter [ OK ] Stopped LSB: initscript to use GSM modem integrated RTC. [ OK ] Stopped initialize filesystems at first boot. Stopping LSB: Hardware configuration with Device Tree overlays... [ OK ] Stopped LSB: Hardware configuration with Device Tree overlays. Stopping watch config files... [ OK ] Stopped watch config files. [ OK ] Stopped target Basic System. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Paths. [ OK ] Stopped Monitor directories with device templates for wb-mqtt-serial. [ OK ] Stopped target Sockets. [ OK ] Closed Syslog Socket. [ OK ] Closed KNX Daemon (socket). [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Closed PC/SC Smart Card Daemon Activation Socket. [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Stopped target System Initialization. Stopping Load/Save Random Seed... [ OK ] Stopped target Swap. Deactivating swap /dev/disk/by-id/mmc-Q2J55L_0x0f957204-part5... [ OK ] Stopped target Encrypted Volumes. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [ OK ] Stopped Forward Password Requests to Wall Directory Watch. Stopping Update UTMP about System Boot/Shutdown... [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Load Kernel Modules. [ OK ] Deactivated swap /dev/disk/by-uuid/…dc1d4-0bf7-4e14-8ac4-0a76ff690430. [ OK ] Deactivated swap /dev/disk/by-path/platform-2194000.usdhc-part5. [ OK ] Deactivated swap /dev/disk/by-partuuid/ddcf7af5-05. [ OK ] Deactivated swap /dev/disk/by-id/mmc-Q2J55L_0x0f957204-part5. [ OK ] Stopped Load/Save Random Seed. [ OK ] Deactivated swap /dev/mmcblk0p5. [ OK ] Stopped Update UTMP about System Boot/Shutdown. [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped Flush Journal to Persistent Storage. Stopping prepare mounts and symlinks to config files... [ OK ] Stopped prepare mounts and symlinks to config files. [ OK ] Stopped target Local File Systems. Unmounting /var/log... [FAILED] Failed unmounting /var/log. Unmounting /mnt/data... [ OK ] Unmounted /mnt/data. [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped File System Check on /dev/mmcblk0p6. [ OK ] Removed slice system-systemd\x2dfsck.slice. [ OK ] Stopped target Local File Systems (Pre). [ OK ] Stopped prepare partitions at first boot. [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Reached target Shutdown. [ OK ] Reached target Final Step. Starting Reboot... [ 96.577568] watchdog: watchdog0: watchdog did not stop! [ 96.595504] systemd-shutdow: 24 output lines suppressed due to ratelimiting [ 100.503646] systemd-shutdown[1]: Sending SIGTERM to remaining processes... [ 100.579828] systemd-journald[153]: Received SIGTERM from PID 1 (systemd-shutdow). [ 100.626725] systemd-shutdown[1]: Sending SIGKILL to remaining processes... [ 100.651456] systemd-shutdown[1]: Hardware watchdog 'imx2+ watchdog', version 0 [ 100.661222] systemd-shutdown[1]: Unmounting file systems. [ 100.668503] systemd-shutdown[1]: Remounting '/var/log' read-only with options 'data=ordered'. [ 100.696404] EXT4-fs (mmcblk0p6): re-mounted. Opts: data=ordered [ 100.706386] systemd-shutdown[1]: Unmounting /var/log. [ 100.834246] systemd-shutdown[1]: Remounting '/' read-only with options 'errors=remount-ro,data=ordered'. [ 100.872973] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro,data=ordered [ 100.890369] systemd-shutdown[1]: Remounting '/' read-only with options 'errors=remount-ro,data=ordered'. [ 100.900606] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro,data=ordered [ 100.908394] systemd-shutdown[1]: Remounting '/' read-only with options 'errors=remount-ro,data=ordered'. [ 100.918532] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro,data=ordered [ 100.926274] systemd-shutdown[1]: All filesystems unmounted. [ 100.951973] ci_hdrc ci_hdrc.1: remove, state 1 [ 100.956926] usb usb2: USB disconnect, device number 1 [ 100.962075] usb 2-1: USB disconnect, device number 2 [ 100.967351] usb 2-1.1: USB disconnect, device number 3 [ 100.975417] RTL871X: rtw_ndev_uninit(wlan0) [ 101.003747] RTL871X: rtw_ndev_uninit(wlan1) [ 101.033501] RTL871X: rtw_cmd_thread: DriverStopped(1) SurpriseRemoved(1) break at line 452 [ 101.041819] RTL871X: rtw_dev_unload: driver in IPS-FWLPS [ 101.053611] ci_hdrc ci_hdrc.1: USB bus 2 deregistered [ 101.062274] ci_hdrc ci_hdrc.0: remove, state 4 [ 101.067074] usb usb1: USB disconnect, device number 1 [ 101.073836] ci_hdrc ci_hdrc.0: USB bus 1 deregistered [ 101.103685] imx2-wdt 20bc000.wdog: Device shutdown: Expect reboot! [ 101.110753] reboot: Restarting system U-Boot 2017.03-1.0.2-g6ee0824fba (May 27 2019 - 16:14:52 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 57C Reset cause: WDOG Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial EEPROM #0 MAC: 04:91:62:c2:94:4f EEPROM #1 MAC: 04:91:62:c2:31:e0 Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 0 => => ▒ U-Boot 2017.03-1.0.2-g6ee0824fba (May 27 2019 - 16:14:52 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 52C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial EEPROM #0 MAC: 04:91:62:c2:94:4f EEPROM #1 MAC: 04:91:62:c2:31:e0 Net: eth0: ethernet@02188000