U-Boot SPL 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) DRAM init ok, rows:15, ncs:1, size: 512MB .p0_mpdgctrl0= 0x01090109 .p0_mpdgctrl1= 0x0e3f0e3f .p0_mprddlctl= 0x3f3f3a3d .p0_mpwrdlctl= 0x3f3f3837 .p0_mpwldectrl0= 0x00090003 .p0_mpwldectrl1= 0x000a000a Trying to boot from MMC1 Warning - USDHC2 controller not supporting U-Boot 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 47C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 1 In: serial Out: serial Err: serial Loading Environment from MMC... OK Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 43 = 0x2B bootcount=0 mmcpart=2 upgrade_available=0 Environment size: 43/8188 bytes ## Resetting to default environment ## Info: input data size = 43 = 0x2B Net: eth0: ethernet@2188000 Hit any key to stop autoboot: 1 0 ## Info: input data size = 4285 = 0x10BD switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode Коммменатрий: в этом месте нажал кнопку FW Entering firmware update mode. Checking if ubootenv part is present ## Loading FIT header to 0x82000000 ... ## Loading FIT strings to 0x82000028 ... ## Loading FIT struct to 0x82000100 ... Can't find subimage 'ubootenv' Extracting kernel ## Loading FIT header to 0x82000000 ... ## Loading FIT strings to 0x82000028 ... ## Loading FIT struct to 0x82000100 ... 11523560 bytes read in 517 ms (21.3 MiB/s) Description: Update kernel Type: Kernel Image Compression: uncompressed Data Start: 0x82000300 Data Size: 11514600 Bytes = 11 MiB Architecture: ARM OS: Linux Load Address: unavailable Entry Point: unavailable Hash algo: sha1 Hash value: 8485f8a5458f57a80cab6a345c1ee67f7e40ae25 ## Verifying ... sha1+ Loading part 0 ... OK Extracting DTB ## Loading FIT header to 0x83000000 ... ## Loading FIT strings to 0x83000028 ... ## Loading FIT struct to 0x83000100 ... 66325 bytes read in 29 ms (2.2 MiB/s) Description: Update DTB Type: Flat Device Tree Compression: uncompressed Data Start: 0x83000440 Data Size: 57045 Bytes = 55.7 KiB Architecture: ARM Hash algo: sha1 Hash value: 55ec41560f668ab075c7524503142abcbc96bed8 ## Verifying ... sha1+ Loading part 0 ... OK Kernel image @ 0x82000000 [ 0x000000 - 0xafb2e8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 9ef89000, end 9ef99ed4 ... OK Starting kernel ... Online 12:42 U-Boot SPL 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) DRAM init ok, rows:15, ncs:1, size: 512MB .p0_mpdgctrl0= 0x010b010b .p0_mpdgctrl1= 0x0e3f0e3f .p0_mprddlctl= 0x3f3f3d3f .p0_mpwrdlctl= 0x3f3f3938 .p0_mpwldectrl0= 0x00090003 .p0_mpwldectrl1= 0x000a000a Trying to boot from MMC1 Warning - USDHC2 controller not supporting U-Boot 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 52C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 1 In: serial Out: serial Err: serial Loading Environment from MMC... OK Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 43 = 0x2B bootcount=0 mmcpart=2 upgrade_available=0 Environment size: 43/8188 bytes ## Resetting to default environment ## Info: input data size = 43 = 0x2B Net: eth0: ethernet@2188000 Hit any key to stop autoboot: 1 0 ## Info: input data size = 4285 = 0x10BD switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ Коммменатрий: если жму FW в этом месте, то система по циклу переходит через некоторое время в эту же точку Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... Bus usb@2184000: USB EHCI 1.00 Bus usb@2184200: USB EHCI 1.00 scanning bus usb@2184000 for devices... 2 USB Device(s) found scanning bus usb@2184200 for devices... EHCI timed out on TD - token=0x80008d80 USB device not accepting new address (error=22) 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Device 0: Vendor: JetFlash Rev: 1.00 Prod: TS512MJF2A Type: Removable Hard Disk Capacity: 490.0 MB = 0.4 GB (1003600 x 512) 1 bytes read in 3 ms (0 Bytes/s) ############################## # Detected USB Flash drive with update file # Filename: wb6_update.fit # Press a FW key if you want to update firmware from this file # or wait 3 seconds to boot normally. ############################## Коммменатрий: в этом месте нет паузы для нажатия кнопки FW - даже если нажал чуть ранее и продержал ее в этот момент переход на загрузку с флешки не происходит. No USB update detected, continuing boot 322 bytes read in 2 ms (157.2 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 6304360 bytes read in 273 ms (22 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt imx6ul-wirenboard65 46062 bytes read in 6 ms (7.3 MiB/s) 808 bytes read in 3 ms (262.7 KiB/s) Applying DT overlay wb6-gsm-sim5300e 597 bytes read in 3 ms (194.3 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu 509 bytes read in 3 ms (165 KiB/s) Applying DT overlay wb6-noradio 334 bytes read in 3 ms (108.4 KiB/s) Applying DT overlay wb6-eth1 254 bytes read in 3 ms (82 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x82000000 [ 0x000000 - 0x603268 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 9ef77000, end 9ef99fff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb153 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Thu Oct 26 10:16:18 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 6.5 (i.MX6UL/ULL) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 489364K/524288K available (8192K kernel code, 728K rwdata, 2776K rodata, 1024K init, 283K bss, 18540K reserved, 16384K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x234/0x3dc with crng_init=0 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000056] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002731] Console: colour dummy device 80x30 [ 0.002795] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002834] pid_max: default: 32768 minimum: 301 [ 0.003224] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.003260] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.004941] CPU: Testing write buffer coherency: ok [ 0.006157] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.007038] devtmpfs: initialized [ 0.024460] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.024970] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.025017] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.026388] pinctrl core: initialized pinctrl subsystem [ 0.028366] NET: Registered protocol family 16 [ 0.030579] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.032521] thermal_sys: Registered thermal governor 'step_wise' [ 0.032792] cpuidle: using governor menu [ 0.197356] vdd1p1: supplied by regulator-dummy [ 0.208495] vdd3p0: supplied by regulator-dummy [ 0.219661] cpu: supplied by regulator-dummy [ 0.230799] vddsoc: supplied by regulator-dummy [ 0.568013] No ATAGs? [ 0.568074] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.568095] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.568668] debugfs: Directory 'dummy-iomuxc-gpr@20e4000' with parent 'regmap' already present! [ 0.569274] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.570787] imx6ul-pinctrl 2290000.iomuxc-snvs: no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000 [ 0.570826] imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl driver [ 0.613188] mxs-dma 1804000.dma-apbh: initialized [ 0.618476] SCSI subsystem initialized [ 0.618968] usbcore: registered new interface driver usbfs [ 0.619094] usbcore: registered new interface driver hub [ 0.619203] usbcore: registered new device driver usb [ 0.620000] gpio-48 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.620128] gpio-49 (i2c_rtc): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.621066] i2c-gpio i2c_rtc: using lines 48 (SDA) and 49 (SCL) [ 0.621817] gpio-76 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.621945] gpio-67 (i2c_eeprom1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.622533] i2c-gpio i2c_eeprom1: using lines 76 (SDA) and 67 (SCL) [ 0.623308] gpio-70 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.623437] gpio-71 (i2c_eeprom2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.624060] i2c-gpio i2c_eeprom2: using lines 70 (SDA) and 71 (SCL) [ 0.625626] gpio-30 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 0.625976] i2c i2c-1: IMX I2C adapter registered [ 0.626714] mc: Linux media interface: v0.10 [ 0.626830] videodev: Linux video capture interface: v2.00 [ 0.626963] pps_core: LinuxPPS API ver. 1 registered [ 0.626983] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.627032] PTP clock support registered [ 0.627649] Advanced Linux Sound Architecture Driver Initialized. [ 0.629761] clocksource: Switched to clocksource mxc_timer1 [ 0.647447] NET: Registered protocol family 2 [ 0.648728] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.648826] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.648930] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.649034] TCP: Hash tables configured (established 4096 bind 4096) [ 0.649225] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.649280] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.649597] NET: Registered protocol family 1 [ 0.650642] RPC: Registered named UNIX socket transport module. [ 0.650680] RPC: Registered udp transport module. [ 0.650697] RPC: Registered tcp transport module. [ 0.650712] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.651801] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.654611] Initialise system trusted keyrings [ 0.655065] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.666607] NFS: Registering the id_resolver key type [ 0.666693] Key type id_resolver registered [ 0.666713] Key type id_legacy registered [ 0.903336] Key type asymmetric registered [ 0.903376] Asymmetric key parser 'x509' registered [ 0.903502] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.903525] io scheduler mq-deadline registered [ 0.903544] io scheduler kyber registered [ 0.915334] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.915384] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 0.919229] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 20, base_baud = 5000000) is a IMX [ 1.581817] printk: console [ttymxc0] enabled [ 1.588245] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 58, base_baud = 5000000) is a IMX [ 1.598851] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 59, base_baud = 5000000) is a IMX [ 1.642572] imx_rngc 2284000.rng: Freescale RNGB registered (HW revision 2.129) [ 1.650001] random: fast init done [ 1.653952] random: crng init done [ 1.693954] brd: module loaded [ 1.712081] loop: module loaded [ 1.715573] at24 5-0050: supply vcc not found, using dummy regulator [ 1.727055] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.734075] at24 6-0050: supply vcc not found, using dummy regulator [ 1.745430] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 1.755357] libphy: Fixed MDIO Bus: probed [ 1.762375] pps pps0: new PPS source ptp0 [ 1.802800] libphy: fec_enet_mii_bus: probed [ 1.808071] fec 20b4000.ethernet ethFEC0: registered PHC device 0 [ 1.930439] pps pps1: new PPS source ptp1 [ 1.937026] libphy: fec_enet_mii_bus: probed [ 1.945715] fec 2188000.ethernet ethFEC1: registered PHC device 1 [ 1.952833] PPP generic driver version 2.4.2 [ 1.957511] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.964154] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.969931] usbcore: registered new interface driver usb-storage [ 1.976188] usbcore: registered new interface driver usbserial_generic [ 1.982848] usbserial: USB Serial support registered for generic [ 2.031664] rtc rtc0: invalid alarm value: 2024-01-02T31:45:00 [ 2.037927] rtc-pcf8563 4-0051: registered as rtc0 [ 2.054672] rtc-pcf8563 4-0051: setting system clock to 2024-01-12T07:40:03 UTC (1705045203) [ 2.073015] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc1 [ 2.079449] i2c /dev entries driver [ 2.086253] lm75 4-0048: supply vs not found, using dummy regulator [ 2.097871] lm75 4-0048: hwmon0: sensor 'lm75b' [ 2.217792] sdhci: Secure Digital Host Controller Interface driver [ 2.224070] sdhci: Copyright(c) Pierre Ossman [ 2.228443] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.243272] ledtrig-cpu: registered to indicate activity on CPUs [ 2.251161] usbcore: registered new interface driver usbhid [ 2.256761] usbhid: USB HID core driver [ 2.272042] Initializing XFRM netlink socket [ 2.276450] mmc0: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 2.284763] NET: Registered protocol family 10 [ 2.292568] Segment Routing with IPv6 [ 2.296712] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.304751] NET: Registered protocol family 17 [ 2.309934] Key type dns_resolver registered [ 2.318195] registered taskstats version 1 [ 2.322967] Loading compiled-in X.509 certificates [ 2.345645] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 2.357559] of_cfs_init [ 2.360376] of_cfs_init: OK [ 2.368190] ALSA device list: [ 2.371230] No soundcards found. [ 2.374939] Waiting for root device /dev/mmcblk0p2... [ 2.385114] mmc0: new DDR MMC card at address 0001 [ 2.390900] mmcblk0: mmc0:0001 W62704 3.53 GiB [ 2.395812] mmcblk0boot0: mmc0:0001 W62704 partition 1 2.00 MiB [ 2.402263] mmcblk0boot1: mmc0:0001 W62704 partition 2 2.00 MiB [ 2.408525] mmcblk0rpmb: mmc0:0001 W62704 partition 3 512 KiB, chardev (245:0) [ 2.418898] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.447433] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.455957] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.463592] devtmpfs: mounted [ 2.469083] Freeing unused kernel memory: 1024K [ 2.474687] Run /sbin/init as init process [ 2.882366] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 2.906772] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 2.951028] systemd[1]: Set hostname to . [ 4.585325] systemd[1]: Queued start job for default target Graphical Interface. [ 4.601065] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.647273] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 4.688046] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.737315] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 4.786151] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.820858] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password ts to Console Directory Watch. [ 4.861008] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Ruests to Wall Directory Watch. [ 4.902780] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 4.916820] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 4.960956] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.000429] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.035379] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.071020] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 5.135489] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 5.146196] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.184120] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.231829] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.271762] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.314567] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 5.332455] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.390287] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 5.427836] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 5.470932] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 5.494484] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of stodes for the current kernel... [ 5.565985] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 5.621595] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 5.650422] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.674404] fuse: init (API version 7.32) [ 5.683897] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 5.758553] systemd[1]: Starting Journal Service... Starting Journal Service... [ 5.802381] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 5.861772] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 5.981644] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 6.011048] systemd[1]: Mounted /sys/kernel/config. [ OK ] Mounted /sys/kernel/config. [ 6.047191] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 6.110182] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st nodes for the current kernel. [ 6.185083] systemd[1]: modprobe@drm.service: Succeeded. [ 6.210360] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.252575] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.270303] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 6.303187] systemd[1]: Finished File System Check on Root Device. [ OK ] Finished File System Check on Root Device. [ 6.353456] systemd[1]: Finished Load Kernel Modules. [ OK ] Finished Load Kernel Modules. [ 6.404272] systemd[1]: Mounting FUSE Control File System... Mounting FUSE Control File System... [ 6.476525] systemd[1]: Started File System Check Daemon to report status. [ OK ] Started File System Check Daemon to report status. [ 6.572551] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 6.653552] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 6.697009] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted FUSE Control File System. [ 6.853447] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Remount Root and Kernel File Systems. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Load/Save Random Seed. [FAILED] Failed to start Create System Users. See 'systemctl status systemd-sysusers.service' for details. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. Starting Helper to synchronize boot up for ifupdown... [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Rule-based Managefor Device Events and Files... [ OK ] Started Rule-based Manager for Device Events and Files. [ 9.581642] Driver for 1-wire Dallas network protocol. [ 9.643172] gpio-11 (onewire_w1): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 9.753751] gpio-108 (onewire_w2): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ OK ] Found device /dev/ttymxc0. [ 10.482175] fec 20b4000.ethernet eth1: renamed from ethFEC0 [ 11.208549] imx_usb 2184000.usb: No over current polarity defined [ 11.234589] fec 2188000.ethernet eth0: renamed from ethFEC1 [ 11.328661] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 11.352148] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 11.449952] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 11.496020] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 11.504379] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.511660] usb usb1: Product: EHCI Host Controller [ 11.516547] usb usb1: Manufacturer: Linux 5.10.35-wb153 ehci_hcd [ 11.522579] usb usb1: SerialNumber: ci_hdrc.0 [ 11.765832] hub 1-0:1.0: USB hub found [ 11.793667] hub 1-0:1.0: 1 port detected [ 11.873051] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 11.989987] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 12.039901] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 12.080593] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 12.088938] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.096242] usb usb2: Product: EHCI Host Controller [ 12.101148] usb usb2: Manufacturer: Linux 5.10.35-wb153 ehci_hcd [ 12.107161] usb usb2: SerialNumber: ci_hdrc.1 [ 12.299917] usb usb1-port1: over-current condition [ 12.384693] hub 2-0:1.0: USB hub found [ 12.442123] hub 2-0:1.0: 1 port detected [ 12.469870] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 12.779183] usb 1-1: New USB device found, idVendor=0c76, idProduct=0005, bcdDevice= 1.00 [ 12.787481] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 12.794656] usb 1-1: Product: TS512MJF2A [ 12.798593] usb 1-1: Manufacturer: JetFlash [ 12.869883] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 13.077456] usb-storage 1-1:1.0: USB Mass Storage device detected [ 13.120575] usb 2-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 13.128805] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 13.298391] hub 2-1:1.0: USB hub found [ 13.302289] scsi host0: usb-storage 1-1:1.0 [ 13.356721] hub 2-1:1.0: 4 ports detected [ 13.729914] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 13.911690] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720, bcdDevice= 2.00 [ 13.920131] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 13.927476] usb 2-1.1: Product: 802.11n WLAN Adapter [ 13.932479] usb 2-1.1: Manufacturer: Realtek [ 13.936756] usb 2-1.1: SerialNumber: 00e04c000001 [ 14.342571] scsi 0:0:0:0: Direct-Access JetFlash TS512MJF2A 1.00 PQ: 0 ANSI: 2 [ 14.382306] sd 0:0:0:0: [sda] 1003600 512-byte logical blocks: (514 MB/490 MiB) [ 14.410899] sd 0:0:0:0: [sda] Write Protect is off [ 14.438652] sd 0:0:0:0: [sda] No Caching mode page found [ 14.444066] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 14.505325] sda: sda1 [ 14.533667] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 14.995388] Bluetooth: Core ver 2.22 [ 15.016662] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 15.028288] NET: Registered protocol family 31 [ 15.032832] Bluetooth: HCI device and connection manager initialized [ 15.055552] Bluetooth: HCI socket layer initialized [ 15.076588] Bluetooth: L2CAP socket layer initialized [ 15.100330] Bluetooth: SCO socket layer initialized [ OK ] Found device /dev/mmcblk0p5. [ 15.213054] usbcore: registered new interface driver btusb [ 15.222263] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 15.243130] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 15.249225] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin [ 15.264011] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin [ 15.270914] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 15.284012] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 15.366776] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 15.420849] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ OK ] Found device /dev/mmcblk0p6. [ 15.999897] RTL871X: module init start [ 16.003675] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ 16.105014] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 [ 16.194296] RTL871X: rtw_ndev_init(wlan0) [ 16.213083] RTL871X: rtw_ndev_init(wlan1) [ 16.232705] usbcore: registered new interface driver rtl8723bu [ 16.238623] RTL871X: module init ret=0 [ OK ] Listening on Load/Save RF itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... Starting Load/Save RF Kill Switch Status... [ 16.711152] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ 16.775617] usbcore: registered new interface driver rtl8xxxu [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Finished File System Check on /dev/mmcblk0p6. [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Reached target Swap. Mounting /mnt/data... Starting Create System Users... [ 17.911275] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [FAILED] Failed to start Create System Users. See 'systemctl status systemd-sysusers.service' for details. [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. [ OK ] Started ifup for eth1. Starting Flush Journal to Persistent Storage... Starting prepare mounts and symlinks to config files... [ 18.398263] systemd-journald[122]: Received client request to flush runtime journal. [ 18.433947] systemd-journald[122]: File /var/log/journal/ab8ee04b3c5745389682e776231a74c7/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Flush Journal to Persistent Storage. [ OK Online 12:43] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Monitor directorie templates for wb-mqtt-serial. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onliata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Paths. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onlit4 Metadata Check Snapshots... Starting Authorization Manager... Starting User Login Management... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... [ OK ] Started Generates wb-mqtt- UI schema for wb-mqtt-confed. Starting Avahi mDNS/DNS-SD Stack... [ 22.815438] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.820851] Bluetooth: BNEP filters: protocol multicast Starting WPA supplicant... [ OK ] Started Node-RED graphical event wiring tool. [ 22.962701] Bluetooth: BNEP socket layer initialized [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Bluetooth service. [ OK ] Started Authorization Manager. [ OK ] Started WPA supplicant. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Started User Login Management. [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. Коммменатрий: ... и далее идет загрузка текущей операционной системы