root@wirenboard-AVWHSXYP:~# U-Boot 2017.03-1.1.0-gaa233c0fa3 (Jun 09 2020 - 19:28:23 +0000) CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 58C Reset cause: POR Model: Wiren Board rev. 6.1 (i.MX6UL) Board: Wiren Board MX6UL DRAM: 512 MiB MMC: FSL_SDHC: 0 Using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@02188000 Hit any key to stop autoboot: 0 Checking if there is a USB storage with update file wb6_update.fit dev: usb1_vbus @ regulator@0 starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found No storage devices, perhaps not 'usb start'ed..? No USB update detected, continuing boot switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 324 bytes read in 69 ms (3.9 KiB/s) Importing environment from 0x82000000... Checking if uenvcmd is set ... Running default loadzimage ... 5126192 bytes read in 367 ms (13.3 MiB/s) MMC read: dev # 0, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt imx6ul-wirenboard670 46090 bytes read in 101 ms (445.3 KiB/s) 485 bytes read in 152 ms (2.9 KiB/s) Applying DT overlay wb6-nogsm 597 bytes read in 146 ms (3.9 KiB/s) Applying DT overlay wb6-wifi-rtl8723bu 509 bytes read in 174 ms (2 KiB/s) Applying DT overlay wb6-noradio 334 bytes read in 114 ms (2 KiB/s) Applying DT overlay wb6-eth1 254 bytes read in 126 ms (2 KiB/s) Applying DT overlay temp-industrial Applying extra overlay Booting from mmc ... Kernel image @ 0x82000000 [ 0x000000 - 0x4e3830 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 9ef32000, end 9ef54fff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.22-wb1 (root@wbdevenv) (gcc version 6.3.0 20171 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie [ 0.000000] OF: fdt:Machine model: Wiren Board rev. 6.7.0 (i.MX6UL/ULL) [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] percpu: Embedded 14 pages/cpu @cefc7000 s25996 r8192 d23156 u5734 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa0 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p3 o [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 491716K/524288K available (6144K kernel code, 312K rwdat) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xb0000000 - 0xd0000000 ( 512 MB) [ 0.000000] modules : 0xaf000000 - 0xb0000000 ( 16 MB) [ 0.000000] .text : 0xb0008000 - 0xb0700000 (7136 kB) [ 0.000000] .init : 0xb0a00000 - 0xb0b00000 (1024 kB) [ 0.000000] .data : 0xb0b00000 - 0xb0b4e140 ( 313 kB) [ 0.000000] .bss : 0xb0b50000 - 0xb0ba5aec ( 343 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 8947s [ 0.000054] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffffs [ 0.002586] Console: colour dummy device 80x30 [ 0.002626] Calibrating delay loop (skipped), value calculated using timer f) [ 0.002655] pid_max: default: 32768 minimum: 301 [ 0.002922] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002950] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.004437] CPU: Testing write buffer coherency: ok [ 0.005008] /cpus/cpu@0 missing clock-frequency property [ 0.005049] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005106] Setting up static identity map for 0x80100000 - 0x80100070 [ 0.007721] Brought up 1 CPUs [ 0.007754] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.007771] CPU: All CPU(s) started in SVC mode. [ 0.009218] devtmpfs: initialized [ 0.036585] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 [ 0.037371] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms [ 0.037422] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.038828] pinctrl core: initialized pinctrl subsystem [ 0.041396] NET: Registered protocol family 16 [ 0.043303] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.046107] cpuidle: using governor menu [ 0.081287] No ATAGs? [ 0.081344] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint. [ 0.081367] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.083650] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.129794] mxs-dma 1804000.dma-apbh: initialized [ 0.134625] SCSI subsystem initialized [ 0.135237] usbcore: registered new interface driver usbfs [ 0.135417] usbcore: registered new interface driver hub [ 0.135680] usbcore: registered new device driver usb [ 0.137376] i2c-gpio i2c_rtc: using pins 48 (SDA) and 49 (SCL) [ 0.138294] i2c-gpio i2c_eeprom1: using pins 76 (SDA) and 67 (SCL) [ 0.139172] i2c-gpio i2c_eeprom2: using pins 70 (SDA) and 71 (SCL) [ 0.140708] i2c i2c-1: IMX I2C adapter registered [ 0.140752] i2c i2c-1: can't use DMA, using PIO instead. [ 0.141094] Linux video capture interface: v2.00 [ 0.141356] pps_core: LinuxPPS API ver. 1 registered [ 0.141377] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom> [ 0.141438] PTP clock support registered [ 0.142178] Advanced Linux Sound Architecture Driver Initialized. [ 0.144730] clocksource: Switched to clocksource mxc_timer1 [ 0.170478] NET: Registered protocol family 2 [ 0.171740] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.171863] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.172022] TCP: Hash tables configured (established 4096 bind 4096) [ 0.172140] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.172196] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.172498] NET: Registered protocol family 1 [ 0.173420] RPC: Registered named UNIX socket transport module. [ 0.173451] RPC: Registered udp transport module. [ 0.173466] RPC: Registered tcp transport module. [ 0.173481] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.178427] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.198168] NFS: Registering the id_resolver key type [ 0.198251] Key type id_resolver registered [ 0.198269] Key type id_legacy registered [ 0.209208] Block layer SCSI generic (bsg) driver version 0.4 loaded (major ) [ 0.209244] io scheduler noop registered (default) [ 0.209261] io scheduler deadline registered [ 0.209343] io scheduler cfq registered [ 0.216240] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-im2 [ 0.216283] imx-sdma 20ec000.sdma: external firmware not found, using ROM fie [ 0.225789] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 19, base_baud =X [ 0.804885] console [ttymxc0] enabled [ 0.810503] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 56, base_baud =X [ 0.853863] imx_rngc 2284000.rngb: Freescale RNGC registered. [ 0.859999] [drm] Initialized [ 0.899995] brd: module loaded [ 0.919799] loop: module loaded [ 0.928057] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 0.939517] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write [ 0.951172] spi_imx 2010000.ecspi: probed [ 0.956870] libphy: Fixed MDIO Bus: probed [ 0.963435] 20b4000.ethernet supply phy not found, using dummy regulator [ 0.971519] pps pps0: new PPS source ptp0 [ 1.005408] libphy: fec_enet_mii_bus: probed [ 1.011109] fec 20b4000.ethernet eth0: registered PHC device 0 [ 1.134823] 2188000.ethernet supply phy not found, using dummy regulator [ 1.255902] pps pps1: new PPS source ptp1 [ 1.261178] libphy: fec_enet_mii_bus: probed [ 1.269339] fec 2188000.ethernet eth1: registered PHC device 1 [ 1.275881] PPP generic driver version 2.4.2 [ 1.280716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.287398] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.293265] usbcore: registered new interface driver usb-storage [ 1.299897] usbcore: registered new interface driver usbserial [ 1.306043] usbcore: registered new interface driver usbserial_generic [ 1.312706] usbserial: USB Serial support registered for generic [ 1.319439] mousedev: PS/2 mouse device common for all mice [ 1.383550] rtc-pcf8563 4-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 1.399875] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.1 [ 1.408990] i2c /dev entries driver [ 1.422542] lm75 4-0048: hwmon0: sensor 'lm75b' [ 1.543582] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.551874] sdhci: Secure Digital Host Controller Interface driver [ 1.558203] sdhci: Copyright(c) Pierre Ossman [ 1.562589] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.634814] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADA [ 1.651677] ledtrig-cpu: registered to indicate activity on CPUs [ 1.678448] usbcore: registered new interface driver usbhid [ 1.686214] usbhid: USB HID core driver [ 1.712345] NET: Registered protocol family 10 [ 1.719627] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.727543] NET: Registered protocol family 17 [ 1.732248] Key type dns_resolver registered [ 1.741644] Registering SWP/SWPB emulation handler [ 1.748645] registered taskstats version 1 [ 1.769910] random: fast init done [ 1.779292] mmc0: new DDR MMC card at address 0001 [ 1.786432] imx_thermal 2000000.aips-bus:tempmon: Industrial CPU temperatureC [ 1.797424] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB [ 1.802411] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB [ 1.821346] rtc-pcf8563 4-0051: setting system clock to 2021-05-12 12:34:39 ) [ 1.829845] of_cfs_init [ 1.832671] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB [ 1.839177] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB [ 1.848279] of_cfs_init: OK [ 1.856731] vdd3p0: disabling [ 1.859840] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 1.864419] vref-3v3: disabling [ 1.870033] usb1_vbus: disabling [ 1.873297] ALSA device list: [ 1.876378] No soundcards found. [ 1.882713] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incoms [ 1.891709] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incoms [ 1.901558] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesysm [ 1.909000] EXT4-fs (mmcblk0p3): write access will be enabled during recovery [ 2.371222] EXT4-fs (mmcblk0p3): recovery complete [ 2.378401] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. ) [ 2.386644] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 2.394502] devtmpfs: mounted [ 2.398955] Freeing unused kernel memory: 1024K (b0a00000 - b0b00000) [ 2.638089] systemd[1]: RTC configured in localtime, applying delta of 240 m. [ 2.679797] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.718903] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SE) [ 2.738143] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 2.785926] systemd[1]: Set hostname to . [ 3.080044] systemd-sysv-generator[133]: [/etc/init.d/wb-mqtt-knx:6] Could nt [ 3.410399] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 3.445544] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 3.491270] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 3.525246] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 3.555710] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 3.585921] systemd[1]: Started Forward Password Requests to Wall Directory . [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 3.625879] systemd[1]: Started Dispatch Password Requests to Console Direct. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Encrypted Volumes. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Created slice User and Session Slice. [ OK ] Created slice System Slice. Mounting POSIX Message Queue File System... [ OK ] Created slice system-systemd\x2dfsck.slice. Mounting /sys/kernel/config... [ OK ] Created slice system-getty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. Mounting Debug File System... [ OK ] Listening on Journal Socket. Starting Load Kernel Modules... Starting File System Check on Root Device... Starting Create list of required st�ce nodes for the current kernel.. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Reached target Paths. Starting Journal Service... [ OK ] Reached target Slices. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Mounted /sys/kernel/config. [ OK ] Started Load Kernel Modules. [ OK ] Started File System Check on Root Device. [ OK ] Started Create list of required sta�vice nodes for the current kerne. [ OK ] Started Journal Service. [ OK ] Started File System Check Daemon to report status. Starting Create Static Device Nodes in /dev... Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ 4.589797] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro [ OK ] Started Apply Kernel Variables. [ OK ] Started Remount Root and Kernel File Systems. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems (Pre). Starting udev Coldplug all Devices... [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Kernel Device Manager. [ OK ] Started udev Coldplug all Devices. [ 6.273332] lirc_dev: IR Remote Control driver registered, major 245 [ 6.287119] Driver for 1-wire Dallas network protocol. [ 6.321570] lirc_pwm: module is from the staging directory, the quality is u. [ 6.436209] imx6ul-pinctrl 20e0000.iomuxc: pin MX6UL_PAD_LCD_DATA08 already 9 [ 6.448274] imx6ul-pinctrl 20e0000.iomuxc: pin-78 (lirc-rfm69) status -22 [ 6.455122] imx6ul-pinctrl 20e0000.iomuxc: could not request pin 78 (MX6UL_Pc [ 6.467679] lirc_pwm lirc-rfm69: Error applying setting, reverse things back [ OK ] Found device /dev/ttymxc0. [ 6.842211] lirc_pwm: probe of lirc-rfm69 failed with error -22 [ 6.880972] fec 20b4000.ethernet rename2: renamed from eth0 [ 7.194677] fec 2188000.ethernet eth0: renamed from eth1 [ 7.265549] fec 20b4000.ethernet eth1: renamed from rename2 [ 7.285571] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 7.290542] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 7.434985] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 7.495255] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.502072] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1 [ 7.509431] usb usb1: Product: EHCI Host Controller [ 7.514323] usb usb1: Manufacturer: Linux 4.9.22-wb1 ehci_hcd [ 7.520118] usb usb1: SerialNumber: ci_hdrc.0 [ 7.757968] hub 1-0:1.0: USB hub found [ 7.762435] hub 1-0:1.0: 1 port detected [ 7.793005] 2184200.usb supply vbus not found, using dummy regulator [ 7.926321] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 7.952282] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 8.044889] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 8.087451] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.094267] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1 [ 8.101619] usb usb2: Product: EHCI Host Controller [ 8.106541] usb usb2: Manufacturer: Linux 4.9.22-wb1 ehci_hcd [ 8.112296] usb usb2: SerialNumber: ci_hdrc.1 [ 8.406104] hub 2-0:1.0: USB hub found [ OK ] Found device /dev/mmcblk0p5. [ 8.450061] hub 2-0:1.0: 1 port detected [ OK ] Found device /dev/mmcblk0p6. [ 8.864893] usb 2-1: new high-speed USB device number 2 using ci_hdrc Starting File System Check on /dev/mmcblk0p6... Activating swap /dev/mmcblk0p5... [ 8.997271] Adding 262140k swap on /dev/mmcblk0p5. Priority:-1 extents:1 acS [ 9.075621] usb 2-1: New USB device found, idVendor=0424, idProduct=2514 [ 9.082380] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ OK ] Activated swap /dev/mmcblk0p5. [ 9.098870] hub 2-1:1.0: USB hub found [ 9.103624] hub 2-1:1.0: 4 ports detected [ OK ] Reached target Swap. [ 9.444892] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 9.616483] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720 [ 9.623415] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumbe3 [ 9.630842] usb 2-1.1: Product: 802.11n WLAN Adapter [ 9.635862] usb 2-1.1: Manufacturer: Realtek [ 9.640141] usb 2-1.1: SerialNumber: 00e04c000001 [ 9.831300] Bluetooth: Core ver 2.22 [ 9.861741] NET: Registered protocol family 31 [ 9.866341] Bluetooth: HCI device and connection manager initialized [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 9.893845] Bluetooth: HCI socket layer initialized [ 9.910047] Bluetooth: L2CAP socket layer initialized [ 9.925504] Bluetooth: SCO socket layer initialized [ 9.995863] usbcore: registered new interface driver btusb [ 10.012271] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=3 [ 10.021066] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin [ 10.035654] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.2 [ 10.044923] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin [ 10.051464] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin Starting Load/Save RF Kill Switc[ 10.067249] Bluetooth: hci0: rom_ve1 h Status... [ 10.073754] Bluetooth: cfg_sz 0, total size 22496 [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Started File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 10.558571] 8723bu: module is from the staging directory, the quality is unk. [ 10.590345] RTL871X: module init start [ 10.594202] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40 [ 10.601304] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40 [ 10.648555] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. ) [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/l[ 10.829670] RTL871X: rtw_ndev_init(wlan0) og. [ 10.849252] RTL871X: rtw_ndev_init(wlan1) [ 10.863037] usbcore: registered new interface driver rtl8723bu [ 10.869041] RTL871X: module init ret=0 Starting Flush Journal to Persistent Storage... [ OK ] Reached target Local File Systems. Starting prepare mounts and symlinks to config files... [ 10.948578] usbcore: registered new interface driver rtl8xxxu [ 11.115478] systemd-journald[150]: Received request to flush runtime journal1 [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. [ OK ] Reached target System Time Synchronized. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Listening on KNX Daemon (socket). [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting LSB: Kernel 1-wire MQTT driver for WB-HomA... [ OK ] Started watch config files. Starting LSB: Hardware configuration with Device Tree overlays... Starting System Logging Service... [ OK ] Started Regular background program processing daemon. Starting Mosquitto MQTT v3.1/v3.1.1 Broker... Starting Wiren Board MQTT to Modbus TCP gateway... [ OK ] Started D-Bus System Message Bus. Starting Restore /etc/resolv.conf i�fore the ppp link was shut down.. Starting Login Service... Starting Bluetooth service... [ OK ] Started Cgroup management daemon. Starting LSB: prepare partitions & rootfs... Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started System Logging Service. [ 13.934670] cgroup: new mount options do not match the existing superblock, d [ OK ] Started Restore /etc/resolv.conf if�before the ppp link was shut dow. [ 14.318180] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.323524] Bluetooth: BNEP filters: protocol multicast [ OK ] Started Mosquitto MQTT v3.1/v3.1.1 Broker. [ 14.369952] Bluetooth: BNEP socket layer initialized [ OK ] Started LSB: Kernel 1-wire MQTT driver for WB-HomA. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Bluetooth service. [ OK ] Started Login Service. Starting Hostname Service... [ OK ] Reached target Bluetooth. Starting LSB: : Wiren Board database logger... Starting LSB: Configuration Editor Backend... Starting LSB: Firmware update monitor... Starting LSB: MQTT driver for WB HomA for RFM69 ISM radio... [ OK ] Started Hostname Service. [ OK ] Started LSB: : Wiren Board database logger. [ OK ] Started LSB: Configuration Editor Backend. [ OK ] Started LSB: Firmware update monitor. [ 18.351589] random: crng init done [ 20.051411] ad5064 1-0031: Failed to get supply 'vref': -19 [ 24.975816] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 234, base_baud X [ OK ] Started LSB: Hardware configuration with Device Tree overlays. Starting LSB: MQTT Rule Engine for Wiren Board... [ OK ] Started LSB: MQTT Rule Engine for Wiren Board. [ OK ] Started LSB: prepare partitions & rootfs. Starting LSB: initscript to use GSM modem integrated RTC... [ OK ] Started LSB: initscript to use GSM modem integrated RTC. Starting Raise network interfaces... [ OK ] Started Raise network interfaces. [ OK ] Reached target Network. Starting Permit User Sessions... Starting A high performance web server and a reverse proxy server... Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... Starting dnsmasq - A lightweight DHCP and caching DNS server... Starting KNX Daemon... Starting OpenBSD Secure Shell server... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Permit User Sessions. [ OK ] Started Serial Getty on ttymxc0. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Started KNX Daemon. [ OK ] Started LSB: MQTT driver for WB HomA for RFM69 ISM radio. [ OK ] Reached target Network is Online. Starting LSB: Start NTP daemon... Starting LSB: Brings up/down network automatically... Starting LSB: Advanced IEEE 802.11 management daemon... Starting LSB: : Wiren Board MQTT KNX bridge... [ OK ] Started OpenBSD Secure Shell server. [ 39.247353] SMSC LAN8710/LAN8720 2188000.ethernet:00: attached PHY driver [S) [ 39.465333] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ OK ] Started LSB: : Wiren Board MQTT KNX bridge. [ OK ] Started LSB: Start NTP daemon. [ OK ] Started dnsmasq - A lightweight DHCP and caching DNS server. Debian GNU/Linux 9 wirenboard-AVWHSXYP ttymxc0