wirenboard-A3F7BNGZ login: root Password: _ _ _ __ _(_)_ __ ___ _ __ | |__ ___ __ _ _ __ __| | \ \ /\ / / | '__/ _ \ '_ \| '_ \ / _ \ / _` | '__/ _` | \ V V /| | | | __/ | | | |_) | (_) | (_| | | | (_| | \_/\_/ |_|_| \___|_| |_|_.__/ \___/ \__,_|_| \__,_| Welcome to Wiren Board 7.4.3 (s/n A3F7BNGZ), release wb-2410 (as stable) Linux wirenboard-A3F7BNGZ 5.10.35-wb172 #1 SMP Wed Oct 16 09:19:27 UTC 2024 armv7l GNU/Linux System load: 0.84 1.41 0.78 Up time: 5 min Memory usage: 12% of 1.96G Usage of /: 46% of 2.0G /mnt/data: 5% of 55G 1 package updates are available; type 'apt update && apt upgrade' to update them. Last login: Mon Dec 23 14:05:44 UTC 2024 from 192.168.101.51 on pts/0 root@wirenboard-A3F7BNGZ:~# reboot Stopping Session c1 of user root. [ OK ] Removed slice system-modprobe.slice. [ OK ] Stopped target Bluetooth. [ OK ] Stopped target Graphical Interface. [ OK ] Stopped target Timers. [ OK ] Stopped Daily apt upgrade and clean activities. [ OK ] Stopped Daily apt download activities. [ OK ] Stopped Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Stopped Discard unused blocks once a week. [ OK ] Stopped Daily rotation of log files. [ OK ] Stopped Daily Cleanup of Temporary Directories. [ OK ] Stopped target Hardware activated USB gadget. [ OK ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch. Stopping Bluetooth service... Stopping Simple CGI Server... Stopping Load/Save Random Seed... Stopping watchdog daemon...[ 325.295529] wbec-watchdog wbec-watchdog.3.auto: stop watchdog, but actually EC watchdog is always running, timeout set to 300 seconds [ OK ] Stopped Bluetooth service. [ OK ] Stopped Simple CGI Server. [ OK ] Stopped Serial Getty on ttyS0. [ OK ] Stopped Load/Save Random Seed. [ OK ] Stopped watchdog daemon. [ 325.583217] RTW: recv eapol packet - WPA Group Key 1/2 [ 325.589774] RTW: send eapol packet - WPA Group Key 2/2 [ 325.589923] RTW: set group key camid:2, addr:00:0c:42:b7:ac:03, kid:2, type:AES [ OK ] Stopped Session c1 of user root. [ OK ] Removed slice system-serial\x2dgetty.slice. [ OK ] Stopped target Multi-User System. [ OK ] Stopped target Login Prompts. Stopping Modem Manager... Stopping Avahi mDNS/DNS-SD Stack... Stopping Regular background program processing daemon... Stopping Getty on tty1... Stopping LSB: Brings up/down network automatically... Stopping User Login Management... Stopping User Manager for UID 0... Stopping telegraf metric s…Wiren Board Cloud (default)... Stopping telegraf metric s…Wiren Board Cloud (default)... Stopping Network connectio…ice for Wiren Board devices... Stopping Wiren Board modbus devices manager... Stopping one-click diagnos…enerating archive with data... Stopping Power on GSM modem... Stopping Initialize Wiren Board on successful boot... [ OK ] Stopped KNXD Configurator for Wiren Board. Stopping MQTT Driver for ADC... Stopping Wiren Board configuration editor backend... Stopping Wiren Board database logger... Stopping MQTT Driver for GPIO-controlled switches... Stopping Wiren Board MQTT KNX bridge... Stopping Wiren Board journald to MQTT gateway... Stopping metrics sender.... Stopping Virtual MQTT devi…Network Manager connections... Stopping Kernel 1-Wire MQTT driver for WB-HomA... Stopping MQTT Rule engine for Wiren Board... [ OK ] Stopped Compensation of sy…ice-tree (with opposite sign). Stopping USB Debug Network... Stopping Wiren Board firmware update service... Stopping zigbee2mqtt... [ OK ] Stopped Regular background program processing daemon. [ OK ] Stopped Avahi mDNS/DNS-SD Stack. [ OK ] Stopped Modem Manager. [ OK ] Stopped Network connection…rvice for Wiren Board devices. [ OK ] Stopped Getty on tty1. [ OK ] Stopped one-click diagnost… generating archive with data. [ OK ] Stopped Wiren Board configuration editor backend. [ OK ] Stopped Wiren Board database logger. [ OK ] Stopped Wiren Board MQTT KNX bridge. [ OK ] Stopped Wiren Board journald to MQTT gateway. [ OK ] Stopped metrics sender.. [ OK ] Stopped MQTT Rule engine for Wiren Board. [ OK ] Stopped Wiren Board firmware update service. [ OK ] Stopped MQTT Driver for GPIO-controlled switches. [ OK ] Stopped MQTT Driver for ADC. [ OK ] Stopped Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Stopped telegraf metric se…r Wiren Board Cloud (default). [ OK ] Stopped telegraf metric se…r Wiren Board Cloud (default). [ OK ] Stopped Wiren Board modbus devices manager. [ OK ] Stopped User Manager for UID 0. [ OK ] Stopped USB Debug Network. [ OK ] Removed slice system-getty.slice. Stopping Authorization Manager... Stopping User Runtime Directory /run/user/0... Stopping Wiren Board Cloud Agent (default)... Stopping MQTT Driver for serial devices... [ OK ] Unmounted /run/user/0. [ OK ] Stopped Authorization Manager. [ OK ] Stopped User Login Management. [ OK ] Stopped Wiren Board Cloud Agent (default). [ OK ] Stopped Virtual MQTT devic…r Network Manager connections. [ OK ] Stopped LSB: Brings up/down network automatically. [ OK ] Stopped Initialize Wiren Board on successful boot. [ OK ] Stopped User Runtime Directory /run/user/0. [ OK ] Removed slice User Slice of UID 0. [ OK ] Stopped target Network is Online. [ OK ] Stopped Network Manager Wait Online. Stopping KNX Daemon... Stopping Mosquitto MQTT Broker... Stopping A high performanc… and a reverse proxy server... Stopping Network Time Service... Stopping OpenBSD Secure Shell server... Stopping Permit User Sessions... [ OK ] Stopped OpenBSD Secure Shell server. [ OK ] Stopped Mosquitto MQTT Broker. [ OK ] Stopped KNX Daemon. [ OK ] Stopped Network Time Service. [ OK ] Stopped A high performance…er and a reverse proxy server. [ OK ] Stopped Permit User Sessions. [ OK ] Stopped target Host and Network Name Lookups. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped MQTT Driver for serial devices. [ OK ] Stopped zigbee2mqtt. [ OK ] Stopped target Network. Stopping Network Manager... Stopping Raise network interfaces... Stopping WPA supplicant... [ OK ] Stopped Raise network interfaces. [ 336.113730] RTW: clear key for addr:00:0c:42:b7:ac:03, camid:0 [ 336.123972] RTW: clear key for addr:00:0c:42:b7:ac:03, camid:1 [ 336.131204] usb 3-1: USB disconnect, device number 3 [ 336.136491] rndis_host 3-1:1.0 usb0: unregister 'rndis_host' usb-1c1c000.usb-1, RNDIS device [ 336.147091] RTW: clear key for addr:00:0c:42:b7:ac:03, camid:2 [ 336.220751] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 336.229123] option 3-1:1.2: device disconnected [ 336.234942] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 336.243331] option 3-1:1.4: device disconnected [ 336.248986] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 336.257213] option 3-1:1.5: device disconnected [ 336.263002] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 [ 336.271246] option 3-1:1.3: device disconnected [ OK ] Stopped WPA supplicant. [ OK ] Stopped Network Manager. Stopping D-Bus System Message Bus... [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped Power on GSM modem. [ OK ] Stopped Initialize Wiren Board Device Tree overlays. Stopping watch config files... [ OK ] Stopped watch config files. [ OK ] Stopped target Basic System. [ OK ] Stopped target Paths. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Sockets. [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Closed fcgiwrap Socket. [ OK ] Closed KNX Daemon (socket). [ OK ] Stopped target System Initialization. [ OK ] Stopped target Local Encrypted Volumes. [ OK ] Stopped Dispatch Password …ts to Console Directory Watch. [ OK ] Stopped Forward Password R…uests to Wall Directory Watch. [ OK ] Stopped target Swap. Deactivating swap /dev/dis…mmc-MMC64G_0x6d67430c-part5... [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Load Kernel Modules. Stopping Update UTMP about System Boot/Shutdown... [ OK ] Deactivated swap /dev/disk/by-partuuid/7378558a-05. [ OK ] Deactivated swap /dev/disk…c-1a6d-4af5-86a9-a36800e556b9. [ OK ] Deactivated swap /dev/disk…th/platform-1c11000.mmc-part5. [ OK ] Deactivated swap /dev/disk…d/mmc-MMC64G_0x6d67430c-part5. [ OK ] Deactivated swap /dev/mmcblk0p5. [ OK ] Stopped Update UTMP about System Boot/Shutdown. [ OK ] Stopped Create Volatile Files and Directories. Stopping Flush Journal to Persistent Storage... [ 345.348053] systemd-journald[140]: Received client request to relinquish /var/log/journal/9f75034cb9004cb7be7df6d9f4c14bd0 access. Stopping prepare mounts and symlinks to config files... [ OK ] Stopped prepare mounts and symlinks to config files. [ OK ] Stopped target Local File Systems. [ OK ] Unset automount mnt-sdcard.automount. [ OK ] Stopped Flush Journal to Persistent Storage. Unmounting /var/log... [ OK ] Unmounted /var/log. Unmounting /mnt/data... [ OK ] Unmounted /mnt/data. [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped File System Check on /dev/mmcblk0p6. [ OK ] Removed slice system-systemd\x2dfsck.slice. [ OK ] Stopped target Local File Systems (Pre). [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Create System Users. [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Stopped File System Check on Root Device. [ OK ] Reached target Shutdown. [ OK ] Reached target Final Step. [ OK ] Finished Reboot. [ OK ] Reached target Reboot. [ 346.644635] systemd-shutdown[1]: Syncing filesystems and block devices. [ 346.652951] systemd-shutdown[1]: Sending SIGTERM to remaining processes... [ 346.674294] systemd-journald[140]: Received SIGTERM from PID 1 (systemd-shutdow). [ 346.718180] systemd-shutdown[1]: Sending SIGKILL to remaining processes... [ 346.737090] systemd-shutdown[1]: Using hardware watchdog 'sunxi-wdt', version 0, device /dev/watchdog [ 346.750573] systemd-shutdown[1]: Unmounting file systems. [ 346.770538] [10211]: Remounting '/' read-only in with options 'discard,errors=remount-ro,stripe=1024'. [ 346.812407] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro,stripe=1024 [ 346.852076] systemd-shutdown[1]: All filesystems unmounted. [ 346.857710] systemd-shutdown[1]: Deactivating swaps. [ 346.863065] systemd-shutdown[1]: All swaps deactivated. [ 346.868314] systemd-shutdown[1]: Detaching loop devices. [ 346.879305] systemd-shutdown[1]: All loop devices detached. [ 346.884901] systemd-shutdown[1]: Stopping MD devices. [ 346.890359] systemd-shutdown[1]: All MD devices stopped. [ 346.895685] systemd-shutdown[1]: Detaching DM devices. [ 346.901192] systemd-shutdown[1]: All DM devices detached. [ 346.906605] systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached. [ 346.929615] systemd-shutdown[1]: Syncing filesystems and block devices. [ 346.936495] systemd-shutdown[1]: Rebooting. [ 346.942668] RTW: stop cmd thread during rtw_dev_shutdown [ 346.974227] RTW: cmd thread is stopped during rtw_dev_shutdown [ 346.995790] reboot: Restarting system [EC] Reboot request, reset power. U-Boot SPL 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) DRAM: 2048 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 2 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 2 ms (159.2 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502360 bytes read in 174 ms (35.6 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57964 bytes read in 5 ms (11.1 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-commercial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x6337d8 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb172 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Oct 16 09:19:27 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0xbec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 2043848K/2097152K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 36920K reserved, 16384K cma-reserved, 1294324K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000010] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000029] Switching to timer-based delay loop, resolution 41ns [ 0.000483] Console: colour dummy device 80x30 [ 0.000569] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000605] pid_max: default: 32768 minimum: 301 [ 0.000896] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000929] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002215] CPU: Testing write buffer coherency: ok [ 0.003593] /cpus/cpu@0 missing clock-frequency property [ 0.003704] /cpus/cpu@1 missing clock-frequency property [ 0.003810] /cpus/cpu@2 missing clock-frequency property [ 0.003921] /cpus/cpu@3 missing clock-frequency property [ 0.003959] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005720] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.005982] rcu: Hierarchical SRCU implementation. [ 0.007050] smp: Bringing up secondary CPUs ... [ 0.019442] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031833] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.043493] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.043758] smp: Brought up 1 node, 4 CPUs [ 0.043809] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.043827] CPU: All CPU(s) started in HYP mode. [ 0.043843] CPU: Virtualization extensions available. [ 0.045225] devtmpfs: initialized [ 0.067775] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.069050] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.069134] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.070802] pinctrl core: initialized pinctrl subsystem [ 0.072693] NET: Registered protocol family 16 [ 0.077574] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.080166] thermal_sys: Registered thermal governor 'step_wise' [ 0.081084] No ATAGs? [ 0.081425] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.081451] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.169855] SCSI subsystem initialized [ 0.170169] usbcore: registered new interface driver usbfs [ 0.170262] usbcore: registered new interface driver hub [ 0.170351] usbcore: registered new device driver usb [ 0.170799] mc: Linux media interface: v0.10 [ 0.170868] videodev: Linux video capture interface: v2.00 [ 0.170940] pps_core: LinuxPPS API ver. 1 registered [ 0.170956] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.170987] PTP clock support registered [ 0.171322] Advanced Linux Sound Architecture Driver Initialized. [ 0.174085] clocksource: Switched to clocksource arch_sys_counter [ 1.306843] NET: Registered protocol family 2 [ 1.308726] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.308866] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.309082] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.309371] TCP: Hash tables configured (established 8192 bind 8192) [ 1.309665] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.309773] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.310171] NET: Registered protocol family 1 [ 1.311270] RPC: Registered named UNIX socket transport module. [ 1.311302] RPC: Registered udp transport module. [ 1.311320] RPC: Registered tcp transport module. [ 1.311338] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.313837] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.316806] Initialise system trusted keyrings [ 1.317147] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.332745] NFS: Registering the id_resolver key type [ 1.332838] Key type id_resolver registered [ 1.332857] Key type id_legacy registered [ 1.499440] Key type asymmetric registered [ 1.499525] Asymmetric key parser 'x509' registered [ 1.500006] bounce: pool size: 64 pages [ 1.500137] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.500179] io scheduler mq-deadline registered [ 1.500211] io scheduler kyber registered [ 1.502100] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.543599] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.568408] brd: module loaded [ 1.586880] loop: module loaded [ 1.596406] libphy: Fixed MDIO Bus: probed [ 1.599127] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.600225] libphy: sun4i_mii_bus: probed [ 1.603328] CAN device driver interface [ 1.606974] PPP generic driver version 2.4.2 [ 1.607269] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.607290] ehci-platform: EHCI generic platform driver [ 1.609693] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.609762] ohci-platform: OHCI generic platform driver [ 1.611538] usbcore: registered new interface driver usb-storage [ 1.611685] usbcore: registered new interface driver usbserial_generic [ 1.611739] usbserial: USB Serial support registered for generic [ 1.615466] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 1.615505] sun6i-rtc 1c20400.rtc: RTC enabled [ 1.616631] i2c /dev entries driver [ 1.627805] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.632925] ledtrig-cpu: registered to indicate activity on CPUs [ 1.633753] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.634208] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.634781] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.635004] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.635200] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.636115] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 1.636686] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 1.637120] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 1.637477] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 1.637832] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 1.640173] usbcore: registered new interface driver usbhid [ 1.640192] usbhid: USB HID core driver [ 1.650599] Initializing XFRM netlink socket [ 1.651363] NET: Registered protocol family 10 [ 1.654173] Segment Routing with IPv6 [ 1.654379] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.655428] NET: Registered protocol family 17 [ 1.655465] can: controller area network core [ 1.655595] NET: Registered protocol family 29 [ 1.655614] can: raw protocol [ 1.655631] can: broadcast manager protocol [ 1.655657] can: netlink gateway - max_hops=1 [ 1.655836] can: SAE J1939 [ 1.656221] Key type dns_resolver registered [ 1.656327] Registering SWP/SWPB emulation handler [ 1.656451] registered taskstats version 1 [ 1.656517] Loading compiled-in X.509 certificates [ 1.690381] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.698555] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.699572] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.705851] printk: console [ttyS0] disabled [ 1.706009] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 2.651666] printk: console [ttyS0] enabled [ 2.658083] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.664950] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.671572] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.679061] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.689904] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.708781] wbec-rtc wbec-rtc.4.auto: DMA mask not set [ 2.715725] wbec-rtc wbec-rtc.4.auto: registered as rtc0 [ 2.721292] wbec-rtc wbec-rtc.4.auto: setting system clock to 2024-12-23T15:06:07 UTC (1734966367) [ 2.734231] wbec spi0.0: WBEC device added [ 2.740380] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.748628] libphy: sun4i_mii_bus: probed [ 2.753775] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.760883] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.767584] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.778671] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.785525] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.792146] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.799710] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.810325] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.818938] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.825753] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.832223] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.839603] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.849985] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.869324] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.888721] vcc-3v3: supplied by regulator-dummy [ 2.894639] vdd-cpu: supplied by regulator-dummy [ 2.900414] vdd-sys: supplied by regulator-dummy [ 2.906196] dcdc4: supplied by regulator-dummy [ 2.911737] vcc-dram: supplied by regulator-dummy [ 2.916707] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.923716] vcc-gmac-phy: supplied by vcc-3v3 [ 2.929356] dc5ldo: supplied by vcc-dram [ 2.933939] tv: Bringing 700000uV into 3300000-3300000uV [ 2.939996] tv: supplied by regulator-dummy [ 2.944884] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.951238] aldo2: supplied by regulator-dummy [ 2.958124] avcc-pll: supplied by regulator-dummy [ 2.964732] eldo1: supplied by regulator-dummy [ 2.970621] eldo2: supplied by regulator-dummy [ 2.976011] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.983023] vcc-pe: supplied by regulator-dummy [ 2.988269] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.996304] vcc-sd-alt: supplied by regulator-dummy [ 3.002955] dldo2: supplied by regulator-dummy [ 3.008990] dldo3: supplied by regulator-dummy [ 3.014744] dldo4: supplied by regulator-dummy [ 3.020090] rtc_ldo: supplied by regulator-dummy [ 3.025953] ldo_io0: supplied by regulator-dummy [ 3.030853] random: fast init done [ 3.035393] ldo_io1: supplied by regulator-dummy [ 3.041417] axp20x-adc axp22x-adc: DMA mask not set [ 3.048622] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 3.059738] axp20x-i2c 0-0034: AXP20X driver loaded [ 3.067040] i2c i2c-1: using pinctrl states for GPIO recovery [ 3.072996] gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 3.081956] i2c i2c-1: using generic GPIOs for recovery [ 3.127892] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 3.135680] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 1500000) is a Allwinner sun4i [ 3.146096] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 3.150650] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 3.154163] libphy: sun4i_mii_bus: probed [ 3.247106] mmc0: new DDR MMC card at address 0001 [ 3.252812] mmcblk0: mmc0:0001 MMC64G 58.2 GiB [ 3.257829] mmcblk0boot0: mmc0:0001 MMC64G partition 1 4.00 MiB [ 3.264217] mmcblk0boot1: mmc0:0001 MMC64G partition 2 4.00 MiB [ 3.270435] mmcblk0rpmb: mmc0:0001 MMC64G partition 3 4.00 MiB, chardev (246:0) [ 3.281444] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 3.307749] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:a4:71 [ 3.316964] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 3.323324] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 3.329690] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 3.335840] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 3.343065] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 3.350311] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 3.355297] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 3.362082] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 3.367751] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 3.374120] libphy: stmmac: probed [ 3.636533] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.642142] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.650397] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 3.684067] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.691205] hub 1-0:1.0: USB hub found [ 3.695073] hub 1-0:1.0: 1 port detected [ 3.700227] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.705870] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.713855] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 3.744065] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.751101] hub 2-0:1.0: USB hub found [ 3.754932] hub 2-0:1.0: 1 port detected [ 3.760043] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.765661] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.773647] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.804488] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.811445] hub 3-0:1.0: USB hub found [ 3.815284] hub 3-0:1.0: 1 port detected [ 3.914151] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.920787] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.928744] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 4.008987] hub 4-0:1.0: USB hub found [ 4.012792] hub 4-0:1.0: 1 port detected [ 4.017904] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 4.024574] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 4.032487] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 4.108935] hub 5-0:1.0: USB hub found [ 4.112739] hub 5-0:1.0: 1 port detected [ 4.117832] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.124507] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 4.132301] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.139552] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 4.218949] hub 6-0:1.0: USB hub found [ 4.222754] hub 6-0:1.0: 1 port detected [ 4.235787] of_cfs_init [ 4.238362] of_cfs_init: OK [ 4.241866] ALSA device list: [ 4.244902] No soundcards found. [ 4.256695] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 4.278153] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.286394] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.296521] devtmpfs: mounted [ 4.304323] Freeing unused kernel memory: 1024K [ 4.354379] Run /sbin/init as init process [ 4.373471] mmc1: host does not support reading read-only switch, assuming write-enable [ 4.384426] mmc1: new ultra high speed SDR104 SDXC card at address 59b4 [ 4.392047] mmcblk1: mmc1:59b4 USDU1 58.3 GiB [ 4.402227] mmcblk1: p1 [ 4.649581] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.673840] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.715422] systemd[1]: Set hostname to . [ 5.481460] systemd[1]: Queued start job for default target Graphical Interface. [ 5.491050] random: systemd: uninitialized urandom read (16 bytes read) [ 5.501925] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.534349] random: systemd: uninitialized urandom read (16 bytes read) [ 5.542905] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.584357] random: systemd: uninitialized urandom read (16 bytes read) [ 5.593062] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.636089] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.675702] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.714724] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.754589] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.794587] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.806681] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.844668] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.874340] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.914264] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.945483] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 5.984701] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 6.035419] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.044727] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.085389] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.121770] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.155076] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.195272] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.209362] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.250252] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.290289] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.330813] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 6.372394] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 6.421359] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.461448] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.485195] fuse: init (API version 7.32) [ 6.496918] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.512940] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.567654] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.583262] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.598208] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.621197] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 6.629320] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 6.640191] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 6.685870] systemd[1]: Mounted Kernel Trace File System. [ OK ] Mounted Kernel Trace File System. [ 6.726780] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.777501] systemd[1]: modprobe@drm.service: Succeeded. [ 6.785259] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.825125] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 7.095736] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 8.110755] Driver for 1-wire Dallas network protocol. [ 8.169894] w1_master_driver w1_bus_master1: Attaching one wire slave 28.00000017a119 crc 93 [ 8.400409] usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator [ 8.460045] wbec-adc wbec-adc.1.auto: DMA mask not set [ 8.495760] wbec-power wbec-power.6.auto: DMA mask not set [ 8.498033] iio-rescale vin-volt: using raw+scale source channel [ 8.515322] wbec-gpio wbec-gpio.2.auto: DMA mask not set [ 8.528201] wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set [ 8.534432] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0 [ 8.574813] wbec-watchdog wbec-watchdog.3.auto: DMA mask not set [ 8.575380] iio-rescale v33-volt: using raw+scale source channel [ 8.655702] iio-rescale v50-volt: using raw+scale source channel [ 8.686660] iio-rescale vbus-debug-volt: using raw+scale source channel [ 8.719253] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.740355] iio-rescale vbus-network-volt: using raw+scale source channel [ 8.759296] iio-rescale a1-volt: using raw+scale source channel [ 8.788253] Bluetooth: Core ver 2.22 [ 8.796686] NET: Registered protocol family 31 [ 8.801167] Bluetooth: HCI device and connection manager initialized [ 8.804869] iio-rescale a2-volt: using raw+scale source channel [ 8.807652] Bluetooth: HCI socket layer initialized [ 8.816667] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.818469] Bluetooth: L2CAP socket layer initialized [ 8.830024] Bluetooth: SCO socket layer initialized [ 8.831601] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 8.840158] iio-rescale a3-volt: using raw+scale source channel [ 8.874660] usbcore: registered new interface driver btusb [ 8.880261] iio-rescale a4-volt: using raw+scale source channel [ 8.915223] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723 [ 8.925356] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 8.931570] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin [ 8.956817] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin [ 8.964320] Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507 [ 9.237549] RTW: rtl8733bu v5.13.0.1-112-g10248f4f3.20230626_COEX20230616-330e [ 9.244969] RTW: rtl8733bu BT-Coex version = COEX20230616-330e [ 9.252161] RTW: [HALMAC]135 [ 9.252161] HALMAC_MAJOR_VER = 1 [ 9.252161] HALMAC_PROTOTYPE_VER = 6 [ 9.252161] HALMAC_MINOR_VER = 6 [ 9.252161] HALMAC_PATCH_VER = 39 [ 9.360121] Bluetooth: hci0: RTL: fw version 0xd9b80b4f [ 9.513799] RTW: hal_com_config_channel_plan chplan:0x7F [ OK ] Found device /dev/mmcblk0p6. [ OK ] Found device /dev/mmcblk0p5. [ 9.662964] RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:34:dd:0c [ 9.671079] RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:34:dd:0c [ 9.679189] usbcore: registered new interface driver rtl8733bu [ OK ] Found device /dev/ttyS0. [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... Starting Load/Save RF Kill Switch Status... [ 10.164158] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Reached target Swap. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 10.322368] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 10.516936] systemd-journald[139]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config files... [ 10.537242] random: crng init done [ 10.540673] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Authorization Manager... [ 12.317793] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.323155] Bluetooth: BNEP filters: protocol multicast [ 12.328671] Bluetooth: BNEP socket layer initialized Starting User Login Management... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started Bluetooth service. [ OK ] Started Authorization Manager. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started WPA supplicant. [ OK ] Started User Login Management. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. [ OK ] Started Network Manager. Starting Network Manager Wait Online... Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ 14.385481] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 14.402263] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 14.404234] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 14.409716] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 14.425711] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 14.434387] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ 14.443742] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.247709] start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384) [ 20.296697] 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 1500000) is a Allwinner sun4i [ 20.454635] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 132, base_baud = 1500000) is a Allwinner sun4i [ 20.863046] ntc-thermistor wbmz4-battery-temp: Thermistor type: ncp15xh103 successfully probed. [ 21.927624] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 133, base_baud = 1500000) is a Allwinner sun4i [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started zigbee2mqtt. [ OK ] Started KNX Daemon. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Getty on tty1. Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Started OpenBSD Secure Shell server. Stopping KNX Daemon... [ OK ] Stopped KNX Daemon. [ OK ] Finished Compensation of s…ice-tree (with opposite sign). Starting KNX Daemon... [ OK ] Started Mosquitto MQTT Broker. Starting Wiren Board Cloud Agent (default)... [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost… generating archive with data. [ 25.428170] RTW: rtw_set_802_11_connect(wlan0) fw_state=0x00000008 [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. Starting Wiren Board MQTT to IEC 60870-5-104 gateway... [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board MQTT to Modbus gateway. [ OK ] Started metrics sender.. [ OK ] Started Virtual MQTT devic…r Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started MQTT Rule engine for Wiren Board. [ OK ] Started Wiren Board firmware update service. [ OK ] Started KNX Daemon. [ OK ] Finished KNXD Configurator for Wiren Board. [ OK ] Started MQTT Driver for GPIO-controlled switches. [ 27.255949] RTW: start auth [ 27.263543] RTW: auth success, start assoc [ 27.275733] RTW: assoc success [ 27.293587] RTW: recv eapol packet 1/4 [ 27.299195] RTW: send eapol packet 2/4 [ 27.347586] RTW: recv eapol packet 3/4 [ 27.363531] RTW: send eapol packet 4/4 [ 27.369571] RTW: set pairwise key camid:0, addr:00:0c:42:b7:ac:03, kid:0, type:AES [ 27.370487] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 27.407404] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:2, type:AES [ OK ] Started Wiren Board MQTT KNX bridge. [ OK ] Finished Network Manager Wait Online. [ OK ] Reached target Network is Online. Starting LSB: Brings up/down network automatically... [ 29.218741] process '/usr/sbin/netplugd' started with executable stack Debian GNU/Linux 11 wirenboard-A3F7BNGZ ttyS0 wirenboard-A3F7BNGZ login: [ 34.404431] vcc-gmac-phy: disabling [ 34.408480] dc5ldo: disabling [ 34.412570] dldo4: disabling [ 50.224183] Mass Storage Function, version: 2009/09/11 [ 50.229431] LUN: removable file: (no medium) [ 50.296909] using random self ethernet address [ 50.301500] using random host ethernet address [ 50.443517] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 50.448558] dbg0: MAC 1a:55:89:a2:69:43 [ 63.904745] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 64.196018] usb 3-1: USB disconnect, device number 2 [ 70.144347] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 70.395178] usbcore: registered new interface driver cdc_ether [ 70.408238] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 9a:a7:6e:60:73:e6 [ 70.436152] usbcore: registered new interface driver rndis_host [ 70.473322] usbcore: registered new interface driver option [ 70.479275] usbserial: USB Serial support registered for GSM modem (1-port) [ 70.487130] option 3-1:1.2: GSM modem (1-port) converter detected [ 70.499845] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 70.507934] option 3-1:1.4: GSM modem (1-port) converter detected [ 70.515402] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 70.522882] option 3-1:1.5: GSM modem (1-port) converter detected [ 70.530498] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 70.537997] option 3-1:1.3: GSM modem (1-port) converter detected [ 70.545417] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 212.016526] RTW: WARN cfg80211_rtw_scan (wlan1) : scan abort!! BusyTraffic [ 264.673640] RTW: recv eapol packet - WPA Group Key 1/2 [ 264.679814] RTW: set group key camid:2, addr:00:0c:42:b7:ac:03, kid:1, type:AES [ 264.679943] RTW: send eapol packet - WPA Group Key 2/2 [ 564.696391] RTW: recv eapol packet - WPA Group Key 1/2 [ 564.702728] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:2, type:AES [ 564.702858] RTW: send eapol packet - WPA Group Key 2/2 [ 864.684849] RTW: recv eapol packet - WPA Group Key 1/2 [ 864.691169] RTW: set group key camid:2, addr:00:0c:42:b7:ac:03, kid:1, type:AES [ 864.691287] RTW: send eapol packet - WPA Group Key 2/2 [ 1164.692725] RTW: recv eapol packet - WPA Group Key 1/2 [ 1164.699039] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:2, type:AES [ 1164.699161] RTW: send eapol packet - WPA Group Key 2/2 [ 1464.702648] RTW: recv eapol packet - WPA Group Key 1/2 [ 1464.709034] RTW: send eapol packet - WPA Group Key 2/2 [ 1464.712946] RTW: set group key camid:2, addr:00:0c:42:b7:ac:03, kid:1, type:AES [ 1764.707559] RTW: recv eapol packet - WPA Group Key 1/2 [ 1764.714071] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:2, type:AES [ 1764.714207] RTW: send eapol packet - WPA Group Key 2/2 [ 2064.708750] RTW: recv eapol packet - WPA Group Key 1/2 [ 2064.714924] RTW: set group key camid:2, addr:00:0c:42:b7:ac:03, kid:1, type:AES [ 2064.715068] RTW: send eapol packet - WPA Group Key 2/2 [ 2366.861319] RTW: recv eapol packet - WPA Group Key 1/2 [ 2366.866744] RTW: recv eapol packet - WPA Group Key 1/2 [ 2366.872217] RTW: recv eapol packet - WPA Group Key 1/2 [ 2366.879446] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:2, type:AES [ 2366.879620] RTW: send eapol packet - WPA Group Key 2/2 [ 2366.895330] RTW: send eapol packet - WPA Group Key 2/2 [ 2366.902551] RTW: send eapol packet - WPA Group Key 2/2 [ 2664.726535] RTW: recv eapol packet - WPA Group Key 1/2 [ 2664.733641] RTW: send eapol packet - WPA Group Key 2/2 [ 2664.734206] RTW: set group key camid:2, addr:00:0c:42:b7:ac:03, kid:1, type:AES [ 2964.737865] RTW: recv eapol packet - WPA Group Key 1/2 [ 2964.744050] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:2, type:AES [ 2964.744192] RTW: send eapol packet - WPA Group Key 2/2 [ 3264.744075] RTW: recv eapol packet - WPA Group Key 1/2 [ 3264.750292] RTW: set group key camid:2, addr:00:0c:42:b7:ac:03, kid:1, type:AES [ 3264.750417] RTW: send eapol packet - WPA Group Key 2/2 [ 3564.751184] RTW: recv eapol packet - WPA Group Key 1/2 [ 3564.757413] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:2, type:AES [ 3564.757564] RTW: send eapol packet - WPA Group Key 2/2 [ 3864.772495] RTW: recv eapol packet - WPA Group Key 1/2 [ 3864.778785] RTW: set group key camid:2, addr:00:0c:42:b7:ac:03, kid:1, type:AES [ 3864.778935] RTW: send eapol packet - WPA Group Key 2/2 [ 3931.028766] RTW: WARN cfg80211_rtw_scan (wlan1) : scan abort!! BusyTraffic [ 4164.772868] RTW: recv eapol packet - WPA Group Key 1/2 [ 4164.779037] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:2, type:AES [ 4164.779157] RTW: send eapol packet - WPA Group Key 2/2 [ 4464.808605] RTW: recv eapol packet - WPA Group Key 1/2 [ 4464.814766] RTW: set group key camid:2, addr:00:0c:42:b7:ac:03, kid:1, type:AES [ 4464.814895] RTW: send eapol packet - WPA Group Key 2/2 [ 4764.785982] RTW: recv eapol packet - WPA Group Key 1/2 [ 4764.792354] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:2, type:AES [ 4764.792485] RTW: send eapol packet - WPA Group Key 2/2 [ 5064.801044] RTW: recv eapol packet - WPA Group Key 1/2 [ 5064.808379] RTW: set group key camid:2, addr:00:0c:42:b7:ac:03, kid:1, type:AES [ 5064.808509] RTW: send eapol packet - WPA Group Key 2/2 [ 5364.809541] RTW: recv eapol packet - WPA Group Key 1/2 [ 5364.815722] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:2, type:AES [ 5364.815852] RTW: send eapol packet - WPA Group Key 2/2 [ 5664.820842] RTW: recv eapol packet - WPA Group Key 1/2 [ 5664.827005] RTW: set group key camid:2, addr:00:0c:42:b7:ac:03, kid:1, type:AES [ 5664.827120] RTW: send eapol packet - WPA Group Key 2/2 [ 5964.833588] RTW: recv eapol packet - WPA Group Key 1/2 [ 5964.840086] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:2, type:AES [ 5964.840389] RTW: send eapol packet - WPA Group Key 2/2 [ 6264.841640] RTW: recv eapol packet - WPA Group Key 1/2 [ 6264.849149] RTW: send eapol packet - WPA Group Key 2/2 [ 6264.851603] RTW: set group key camid:2, addr:00:0c:42:b7:ac:03, kid:1, type:AES [ 6564.876774] RTW: recv eapol packet - WPA Group Key 1/2 [ 6564.883264] RTW: send eapol packet - WPA Group Key 2/2 [ 6564.883348] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:2, type:AES [ 6864.848350] RTW: recv eapol packet - WPA Group Key 1/2 [ 6864.854651] RTW: set group key camid:2, addr:00:0c:42:b7:ac:03, kid:1, type:AES [ 6864.854700] RTW: send eapol packet - WPA Group Key 2/2 [ 7164.853646] RTW: recv eapol packet - WPA Group Key 1/2 [ 7164.860399] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:2, type:AES [ 7164.860521] RTW: send eapol packet - WPA Group Key 2/2 [ 7304.103602] usb 3-1: USB disconnect, device number 3 [ 7304.109121] rndis_host 3-1:1.0 usb0: unregister 'rndis_host' usb-1c1c000.usb-1, RNDIS device [ 7304.186935] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 7304.195879] option 3-1:1.2: device disconnected [ 7304.211467] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 7304.219961] option 3-1:1.4: device disconnected [ 7304.227337] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 7304.235633] option 3-1:1.5: device disconnected [ 7304.241352] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 [ 7304.249845] option 3-1:1.3: device disconnected [ 7304.605435] usb 3-1: new high-speed USB device number 4 using ehci-platform [ 7304.995444] usb 3-1: device descriptor read/64, error -71 [EC] 3.3V is lost, try to reset power [EC] Enable WBMZ to prevent power loss under load U-Boot SPL 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) DRAM: 2048 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 2 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 2 ms (159.2 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502360 bytes read in 174 ms (35.6 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57964 bytes read in 6 ms (9.2 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-commercial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x6337d8 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb172 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Oct 16 09:19:27 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0xbec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 2043848K/2097152K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 36920K reserved, 16384K cma-reserved, 1294324K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000027] Switching to timer-based delay loop, resolution 41ns [ 0.000456] Console: colour dummy device 80x30 [ 0.000540] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000575] pid_max: default: 32768 minimum: 301 [ 0.000855] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000887] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003019] CPU: Testing write buffer coherency: ok [ 0.003828] /cpus/cpu@0 missing clock-frequency property [ 0.003916] /cpus/cpu@1 missing clock-frequency property [ 0.004001] /cpus/cpu@2 missing clock-frequency property [ 0.004091] /cpus/cpu@3 missing clock-frequency property [ 0.004123] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005698] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.005946] rcu: Hierarchical SRCU implementation. [ 0.006976] smp: Bringing up secondary CPUs ... [ 0.019579] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031697] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.043288] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.043546] smp: Brought up 1 node, 4 CPUs [ 0.043596] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.043614] CPU: All CPU(s) started in HYP mode. [ 0.043630] CPU: Virtualization extensions available. [ 0.044974] devtmpfs: initialized [ 0.068195] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.068995] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.069067] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.070633] pinctrl core: initialized pinctrl subsystem [ 0.072465] NET: Registered protocol family 16 [ 0.077217] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.079578] thermal_sys: Registered thermal governor 'step_wise' [ 0.080579] No ATAGs? [ 0.080947] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.080974] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.169381] SCSI subsystem initialized [ 0.169716] usbcore: registered new interface driver usbfs [ 0.169792] usbcore: registered new interface driver hub [ 0.169879] usbcore: registered new device driver usb [ 0.170331] mc: Linux media interface: v0.10 [ 0.170406] videodev: Linux video capture interface: v2.00 [ 0.170488] pps_core: LinuxPPS API ver. 1 registered [ 0.170503] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.170536] PTP clock support registered [ 0.170847] Advanced Linux Sound Architecture Driver Initialized. [ 0.173477] clocksource: Switched to clocksource arch_sys_counter [ 1.310356] NET: Registered protocol family 2 [ 1.311480] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.311548] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.311643] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.311786] TCP: Hash tables configured (established 8192 bind 8192) [ 1.311958] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.312038] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.312307] NET: Registered protocol family 1 [ 1.314412] RPC: Registered named UNIX socket transport module. [ 1.314459] RPC: Registered udp transport module. [ 1.314486] RPC: Registered tcp transport module. [ 1.314513] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.316811] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.319891] Initialise system trusted keyrings [ 1.320394] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.336399] NFS: Registering the id_resolver key type [ 1.336509] Key type id_resolver registered [ 1.336538] Key type id_legacy registered [ 1.502523] Key type asymmetric registered [ 1.502555] Asymmetric key parser 'x509' registered [ 1.502738] bounce: pool size: 64 pages [ 1.502826] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.502847] io scheduler mq-deadline registered [ 1.502862] io scheduler kyber registered [ 1.505338] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.546744] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.572451] brd: module loaded [ 1.590316] loop: module loaded [ 1.600462] libphy: Fixed MDIO Bus: probed [ 1.601828] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.603925] libphy: sun4i_mii_bus: probed [ 1.606765] CAN device driver interface [ 1.610984] PPP generic driver version 2.4.2 [ 1.611319] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.611342] ehci-platform: EHCI generic platform driver [ 1.612535] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.612575] ohci-platform: OHCI generic platform driver [ 1.615430] usbcore: registered new interface driver usb-storage [ 1.615617] usbcore: registered new interface driver usbserial_generic [ 1.615683] usbserial: USB Serial support registered for generic [ 1.618278] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 1.618301] sun6i-rtc 1c20400.rtc: RTC enabled [ 1.620490] i2c /dev entries driver [ 1.631969] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.637460] ledtrig-cpu: registered to indicate activity on CPUs [ 1.638384] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.638803] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.639412] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.639647] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.639864] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.640034] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 1.640252] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 1.641302] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 1.641819] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 1.642274] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 1.644952] usbcore: registered new interface driver usbhid [ 1.644973] usbhid: USB HID core driver [ 1.655612] Initializing XFRM netlink socket [ 1.656390] NET: Registered protocol family 10 [ 1.659047] Segment Routing with IPv6 [ 1.659250] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.660309] NET: Registered protocol family 17 [ 1.660347] can: controller area network core [ 1.660469] NET: Registered protocol family 29 [ 1.660488] can: raw protocol [ 1.660506] can: broadcast manager protocol [ 1.660533] can: netlink gateway - max_hops=1 [ 1.660716] can: SAE J1939 [ 1.661125] Key type dns_resolver registered [ 1.661229] Registering SWP/SWPB emulation handler [ 1.661356] registered taskstats version 1 [ 1.661424] Loading compiled-in X.509 certificates [ 1.695530] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.703740] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.704740] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.710913] printk: console [ttyS0] disabled [ 1.711095] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 2.656807] printk: console [ttyS0] enabled [ 2.663414] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.670324] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.676979] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.684383] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.695179] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.705791] wbec spi0.0: wrong wbec ID at 0x0. Get 0x0 istead of 0x3CD2 [ 2.712674] wbec: probe of spi0.0 failed with error -524 [ 2.719155] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.728246] libphy: sun4i_mii_bus: probed [ 2.734568] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.741384] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.748047] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.758679] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.765784] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.772455] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.779984] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.790528] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.800352] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.807185] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.813651] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.820986] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.831472] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.851156] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.868942] vcc-3v3: supplied by regulator-dummy [ 2.875122] vdd-cpu: supplied by regulator-dummy [ 2.881663] vdd-sys: supplied by regulator-dummy [ 2.888028] dcdc4: supplied by regulator-dummy [ 2.893903] vcc-dram: supplied by regulator-dummy [ 2.898882] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.905945] vcc-gmac-phy: supplied by vcc-3v3 [ 2.911677] dc5ldo: supplied by vcc-dram [ 2.916339] tv: Bringing 700000uV into 3300000-3300000uV [ 2.922407] tv: supplied by regulator-dummy [ 2.927340] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.933792] aldo2: supplied by regulator-dummy [ 2.939688] avcc-pll: supplied by regulator-dummy [ 2.945461] eldo1: supplied by regulator-dummy [ 2.950893] eldo2: supplied by regulator-dummy [ 2.956032] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.963917] vcc-pe: supplied by regulator-dummy [ 2.969452] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 2.976686] vcc-sd-alt: supplied by regulator-dummy [ 2.982636] dldo2: supplied by regulator-dummy [ 2.988236] dldo3: supplied by regulator-dummy [ 2.993799] dldo4: supplied by regulator-dummy [ 2.998965] rtc_ldo: supplied by regulator-dummy [ 3.004621] ldo_io0: supplied by regulator-dummy [ 3.010272] ldo_io1: supplied by regulator-dummy [ 3.015790] axp20x-adc axp22x-adc: DMA mask not set [ 3.021317] random: fast init done [ 3.026197] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 3.037366] axp20x-i2c 0-0034: AXP20X driver loaded [ 3.044528] i2c i2c-1: using pinctrl states for GPIO recovery [ 3.050522] gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 3.059494] i2c i2c-1: using generic GPIOs for recovery [ 3.105490] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 3.113161] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 1500000) is a Allwinner sun4i [ 3.123750] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 3.128193] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 3.131752] libphy: sun4i_mii_bus: probed [ 3.224814] mmc0: new DDR MMC card at address 0001 [ 3.230510] mmcblk0: mmc0:0001 MMC64G 58.2 GiB [ 3.235488] mmcblk0boot0: mmc0:0001 MMC64G partition 1 4.00 MiB [ 3.241824] mmcblk0boot1: mmc0:0001 MMC64G partition 2 4.00 MiB [ 3.248096] mmcblk0rpmb: mmc0:0001 MMC64G partition 3 4.00 MiB, chardev (246:0) [ 3.258936] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 3.287167] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:a4:71 [ 3.296381] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 3.302741] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 3.309101] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 3.315301] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 3.322527] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 3.329770] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 3.334757] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 3.341542] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 3.347209] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 3.353559] libphy: stmmac: probed [ 3.615926] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.621538] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.629815] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 3.663457] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.670580] hub 1-0:1.0: USB hub found [ 3.674488] hub 1-0:1.0: 1 port detected [ 3.679656] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.685294] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.693283] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 3.723456] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.730441] hub 2-0:1.0: USB hub found [ 3.734294] hub 2-0:1.0: 1 port detected [ 3.739402] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.745038] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.753005] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.783905] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.790867] hub 3-0:1.0: USB hub found [ 3.794719] hub 3-0:1.0: 1 port detected [ 3.893547] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.900182] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.908160] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 3.988322] hub 4-0:1.0: USB hub found [ 3.992130] hub 4-0:1.0: 1 port detected [ 3.997253] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 4.003935] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 4.011853] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 4.088312] hub 5-0:1.0: USB hub found [ 4.092123] hub 5-0:1.0: 1 port detected [ 4.097292] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.103982] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 4.111777] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.119016] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 4.198333] hub 6-0:1.0: USB hub found [ 4.202139] hub 6-0:1.0: 1 port detected [ 4.215204] of_cfs_init [ 4.217791] of_cfs_init: OK [ 4.221306] ALSA device list: [ 4.224324] No soundcards found. [ 4.236111] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 4.256614] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 4.263996] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.353708] mmc1: host does not support reading read-only switch, assuming write-enable [ 4.364613] mmc1: new ultra high speed SDR104 SDXC card at address 59b4 [ 4.372152] mmcblk1: mmc1:59b4 USDU1 58.3 GiB [ 4.382789] mmcblk1: p1 [ 4.403142] EXT4-fs (mmcblk0p2): recovery complete [ 4.408895] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.417095] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.424652] devtmpfs: mounted [ 4.432386] Freeing unused kernel memory: 1024K [ 4.463695] Run /sbin/init as init process [ 4.695415] systemd[1]: System time before build time, advancing clock. [ 4.763333] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.792263] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.835547] systemd[1]: Set hostname to . [ 5.614940] systemd[1]: Queued start job for default target Graphical Interface. [ 5.624365] random: systemd: uninitialized urandom read (16 bytes read) [ 5.635315] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.673725] random: systemd: uninitialized urandom read (16 bytes read) [ 5.682245] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.723767] random: systemd: uninitialized urandom read (16 bytes read) [ 5.732522] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.775466] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.815118] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.854129] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.893968] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.934007] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.946079] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.984050] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 6.013799] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 6.053677] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 6.084874] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 6.124075] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 6.174892] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.184213] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.224632] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.261228] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.294422] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.334588] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.348746] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.389684] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.429783] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.470235] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 6.511943] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 6.560795] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.600621] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.624501] fuse: init (API version 7.32) [ 6.636318] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.652079] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.705638] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.723031] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.738345] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.763658] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 6.771514] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 6.782554] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System 6.794354] systemd[1]: Mounted Kernel Trace File System. m. [ OK ] Mounted Kernel Trace File System 6.806857] systemd[1]: Finished Create list of static device nodes for the current kernel. m. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.833658] systemd[1]: modprobe@drm.service: Succeeded. [ 6.840891] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.885872] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.892914] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 6.936192] systemd[1]: Finished File System Check on Root Device. [ OK ] Finished File System Check on Root Device. [ 6.977102] systemd[1]: Finished Load Kernel Modules. [ OK ] Finished Load Kernel Modules. [ 7.024530] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 7.228183] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. [ OK ] Finished Coldplug All udev Devices. Starting Helper to synchronize boot up for ifupdown... Starting Create Static Device Nodes in /dev... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Rule-based Manage…for Device Events and Files... [ OK ] Started Rule-based Manager for Device Events and Files. [ 8.261269] Driver for 1-wire Dallas network protocol. [ 8.319999] w1_master_driver w1_bus_master1: Attaching one wire slave 28.00000017a119 crc 93 [ 8.561675] usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, using dummy regulator [ 8.660358] Bluetooth: Core ver 2.22 [ 8.664295] NET: Registered protocol family 31 [ 8.668840] Bluetooth: HCI device and connection manager initialized [ 8.675331] Bluetooth: HCI socket layer initialized [ 8.680246] Bluetooth: L2CAP socket layer initialized [ 8.685493] Bluetooth: SCO socket layer initialized [ 8.739893] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.775784] usbcore: registered new interface driver btusb [ 8.803985] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723 [ 8.813557] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 8.813760] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.819583] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin [ 8.838992] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin [ 8.840421] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 8.846396] Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507 [ OK ] Found device /dev/mmcblk0p5. [ 9.162517] RTW: rtl8733bu v5.13.0.1-112-g10248f4f3.20230626_COEX20230616-330e [ 9.169947] RTW: rtl8733bu BT-Coex version = COEX20230616-330e [ 9.190500] RTW: [HALMAC]135 [ 9.190500] HALMAC_MAJOR_VER = 1 [ 9.190500] HALMAC_PROTOTYPE_VER = 6 [ 9.190500] HALMAC_MINOR_VER = 6 [ 9.190500] HALMAC_PATCH_VER = 39 [ 9.266465] Bluetooth: hci0: RTL: fw version 0xd9b80b4f [ OK ] Found device /dev/mmcblk0p6. [ OK ] Found device /dev/ttyS0. [ 9.421477] RTW: hal_com_config_channel_plan chplan:0x7F [ 9.580295] RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:34:dd:0c [ 9.588401] RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:34:dd:0c [ 9.596494] usbcore: registered new interface driver rtl8733bu [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... Starting Load/Save RF Kill Switch Status... [ 9.873573] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Reached target Swap. [ 10.449310] random: crng init done [ 10.452740] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 10.621164] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 10.837126] systemd-journald[139]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config files... [ 10.860105] systemd-journald[139]: File /var/log/journal/9f75034cb9004cb7be7df6d9f4c14bd0/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Authorization Manager... [ 12.653517] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.658942] Bluetooth: BNEP filters: protocol multicast [ 12.664384] Bluetooth: BNEP socket layer initialized Starting User Login Management... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Bluetooth service. [ OK ] Started Authorization Manager. [ OK ] Started WPA supplicant. [ OK ] Started User Login Management. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. [ OK ] Started Network Manager. Starting Network Manager Wait Online... Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ 14.725406] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 14.739050] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 14.746536] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 14.754383] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 14.762069] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 14.771484] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ 14.779950] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.566261] start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384) [ 20.312396] 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 1500000) is a Allwinner sun4i [ 20.473206] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 132, base_baud = 1500000) is a Allwinner sun4i [ 20.836255] ntc-thermistor wbmz4-battery-temp: Thermistor type: ncp15xh103 successfully probed. [ 21.954182] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 133, base_baud = 1500000) is a Allwinner sun4i [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started zigbee2mqtt. [ OK ] Started KNX Daemon. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Getty on tty1. Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Started OpenBSD Secure Shell server. Stopping KNX Daemon... [ OK ] Stopped KNX Daemon. [ OK ] Finished Compensation of s…ice-tree (with opposite sign). Starting KNX Daemon... [ OK ] Started KNX Daemon. [ OK ] Started Mosquitto MQTT Broker. [ OK ] Finished KNXD Configurator for Wiren Board. Starting Wiren Board Cloud Agent (default)... [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost… generating archive with data. [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. Starting Wiren Board MQTT to IEC 60870-5-104 gateway... [ OK ] Started Wiren Board MQTT KNX bridge. [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board MQTT to Modbus gateway. [ OK ] Started metrics sender.. [ OK ] Started Virtual MQTT devic…r Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started MQTT Rule engine for Wiren Board. [ 25.940159] RTW: rtw_set_802_11_connect(wlan0) fw_state=0x00000008 [ OK ] Started Wiren Board firmware update service. [ OK ] Started MQTT Driver for GPIO-controlled switches. [ 27.869524] RTW: start auth [ 27.875094] RTW: auth success, start assoc [ 27.889431] RTW: assoc success [ 27.915542] RTW: recv eapol packet 1/4 [ 27.920696] RTW: send eapol packet 2/4 [ 27.999896] RTW: recv eapol packet 3/4 [ 28.004718] RTW: send eapol packet 4/4 [ 28.012704] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 28.050739] RTW: set pairwise key camid:0, addr:00:0c:42:b7:ac:03, kid:0, type:AES [ 28.065092] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:2, type:AES [ OK ] Started A high performance…er and a reverse proxy server. Starting Initialize Wiren Board on successful boot... Starting USB Debug Network... [ 30.308966] process '/usr/sbin/netplugd' started with executable stack Debian GNU/Linux 11 wirenboard-A3F7BNGZ ttyS0 wirenboard-A3F7BNGZ login: [ 34.445451] vcc-gmac-phy: disabling [ 34.452998] dc5ldo: disabling [ 34.460503] dldo4: disabling [ 49.648017] Mass Storage Function, version: 2009/09/11 [ 49.653258] LUN: removable file: (no medium) [ 49.716815] using random self ethernet address [ 49.721612] using random host ethernet address [ 49.983838] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 49.988497] dbg0: MAC 1a:55:89:a2:69:43 [ 63.373732] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 63.661016] usb 3-1: USB disconnect, device number 2 [ 69.593678] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 69.875583] usbcore: registered new interface driver cdc_ether [ 69.881722] usbcore: registered new interface driver option [ 69.887624] usbserial: USB Serial support registered for GSM modem (1-port) [ 69.900490] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 1e:6e:aa:e9:6f:a0 [ 69.911098] usbcore: registered new interface driver rndis_host [ 69.917174] option 3-1:1.2: GSM modem (1-port) converter detected [ 69.932378] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 69.939825] option 3-1:1.4: GSM modem (1-port) converter detected [ 69.951965] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 69.959779] option 3-1:1.5: GSM modem (1-port) converter detected [ 69.971829] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 69.979242] option 3-1:1.3: GSM modem (1-port) converter detected [ 69.990405] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [EC] Watchdog is timed out, reset power. U-Boot SPL 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) DRAM: 2048 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 2 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 2 ms (159.2 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502360 bytes read in 175 ms (35.4 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57964 bytes read in 5 ms (11.1 MiB/s) 254 bytes read in 3 ms (82 KiB/s) Applying DT overlay temp-commercial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x6337d8 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb172 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Oct 16 09:19:27 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0xbec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 2043848K/2097152K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 36920K reserved, 16384K cma-reserved, 1294324K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000024] Switching to timer-based delay loop, resolution 41ns [ 0.000403] Console: colour dummy device 80x30 [ 0.000479] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000509] pid_max: default: 32768 minimum: 301 [ 0.000760] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000789] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003585] CPU: Testing write buffer coherency: ok [ 0.004159] /cpus/cpu@0 missing clock-frequency property [ 0.004220] /cpus/cpu@1 missing clock-frequency property [ 0.004280] /cpus/cpu@2 missing clock-frequency property [ 0.004345] /cpus/cpu@3 missing clock-frequency property [ 0.004368] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005664] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.005881] rcu: Hierarchical SRCU implementation. [ 0.007944] smp: Bringing up secondary CPUs ... [ 0.019763] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031486] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.042914] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.043146] smp: Brought up 1 node, 4 CPUs [ 0.043190] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.043206] CPU: All CPU(s) started in HYP mode. [ 0.043220] CPU: Virtualization extensions available. [ 0.044488] devtmpfs: initialized [ 0.068260] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.068809] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.068866] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.070226] pinctrl core: initialized pinctrl subsystem [ 0.072371] NET: Registered protocol family 16 [ 0.076671] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.079379] thermal_sys: Registered thermal governor 'step_wise' [ 0.080189] No ATAGs? [ 0.080512] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.080536] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.168919] SCSI subsystem initialized [ 0.169233] usbcore: registered new interface driver usbfs [ 0.169307] usbcore: registered new interface driver hub [ 0.169386] usbcore: registered new device driver usb [ 0.169804] mc: Linux media interface: v0.10 [ 0.169871] videodev: Linux video capture interface: v2.00 [ 0.169950] pps_core: LinuxPPS API ver. 1 registered [ 0.169965] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.169995] PTP clock support registered [ 0.170866] Advanced Linux Sound Architecture Driver Initialized. [ 0.173187] clocksource: Switched to clocksource arch_sys_counter [ 1.311337] NET: Registered protocol family 2 [ 1.313837] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.313939] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.314090] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.314306] TCP: Hash tables configured (established 8192 bind 8192) [ 1.314543] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.314637] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.314980] NET: Registered protocol family 1 [ 1.315902] RPC: Registered named UNIX socket transport module. [ 1.315929] RPC: Registered udp transport module. [ 1.315944] RPC: Registered tcp transport module. [ 1.315959] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.319060] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.321427] Initialise system trusted keyrings [ 1.321726] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.337789] NFS: Registering the id_resolver key type [ 1.337883] Key type id_resolver registered [ 1.337899] Key type id_legacy registered [ 1.515851] Key type asymmetric registered [ 1.515898] Asymmetric key parser 'x509' registered [ 1.516182] bounce: pool size: 64 pages [ 1.516291] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.516320] io scheduler mq-deadline registered [ 1.516343] io scheduler kyber registered [ 1.517917] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.560054] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.584239] brd: module loaded [ 1.603376] loop: module loaded [ 1.612798] libphy: Fixed MDIO Bus: probed [ 1.615314] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.616249] libphy: sun4i_mii_bus: probed [ 1.620093] CAN device driver interface [ 1.622798] PPP generic driver version 2.4.2 [ 1.623742] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.623808] ehci-platform: EHCI generic platform driver [ 1.625923] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.625976] ohci-platform: OHCI generic platform driver [ 1.627408] usbcore: registered new interface driver usb-storage [ 1.627543] usbcore: registered new interface driver usbserial_generic [ 1.627591] usbserial: USB Serial support registered for generic [ 1.631666] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 1.631697] sun6i-rtc 1c20400.rtc: RTC enabled [ 1.632568] i2c /dev entries driver [ 1.644047] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.649252] ledtrig-cpu: registered to indicate activity on CPUs [ 1.649919] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.650621] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.652102] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.652538] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.652882] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.653125] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 1.653591] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 1.653868] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 1.654108] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 1.654367] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 1.657910] usbcore: registered new interface driver usbhid [ 1.657940] usbhid: USB HID core driver [ 1.667913] Initializing XFRM netlink socket [ 1.669259] NET: Registered protocol family 10 [ 1.670842] Segment Routing with IPv6 [ 1.670992] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.671809] NET: Registered protocol family 17 [ 1.671840] can: controller area network core [ 1.671942] NET: Registered protocol family 29 [ 1.671958] can: raw protocol [ 1.671972] can: broadcast manager protocol [ 1.671993] can: netlink gateway - max_hops=1 [ 1.672602] can: SAE J1939 [ 1.673800] Key type dns_resolver registered [ 1.673964] Registering SWP/SWPB emulation handler [ 1.674165] registered taskstats version 1 [ 1.674270] Loading compiled-in X.509 certificates [ 1.708291] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.715272] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.717270] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.723752] printk: console [ttyS0] disabled [ 1.724012] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 2.668145] printk: console [ttyS0] enabled [ 2.674336] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.681140] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.687798] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.695172] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.705942] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.724743] wbec-rtc wbec-rtc.4.auto: DMA mask not set [ 2.731436] wbec-rtc wbec-rtc.4.auto: registered as rtc0 [ 2.737235] wbec-rtc wbec-rtc.4.auto: setting system clock to 2024-12-23T17:10:07 UTC (1734973807) [ 2.750730] wbec spi0.0: WBEC device added [ 2.756116] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.764268] libphy: sun4i_mii_bus: probed [ 2.769385] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.776354] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.783000] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.794295] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.801104] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.807749] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.815278] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.825894] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.834476] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.841322] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.847869] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.855213] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.865585] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.886110] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.904501] vcc-3v3: supplied by regulator-dummy [ 2.910255] vdd-cpu: supplied by regulator-dummy [ 2.916049] vdd-sys: supplied by regulator-dummy [ 2.921737] dcdc4: supplied by regulator-dummy [ 2.927278] vcc-dram: supplied by regulator-dummy [ 2.932204] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.939977] vcc-gmac-phy: supplied by vcc-3v3 [ 2.946716] dc5ldo: supplied by vcc-dram [ 2.951755] tv: Bringing 700000uV into 3300000-3300000uV [ 2.958148] tv: supplied by regulator-dummy [ 2.963207] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.969734] aldo2: supplied by regulator-dummy [ 2.975913] avcc-pll: supplied by regulator-dummy [ 2.981724] eldo1: supplied by regulator-dummy [ 2.987278] eldo2: supplied by regulator-dummy [ 2.992436] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 3.000173] vcc-pe: supplied by regulator-dummy [ 3.006301] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 3.013562] vcc-sd-alt: supplied by regulator-dummy [ 3.019633] dldo2: supplied by regulator-dummy [ 3.025270] dldo3: supplied by regulator-dummy [ 3.030864] dldo4: supplied by regulator-dummy [ 3.036028] rtc_ldo: supplied by regulator-dummy [ 3.041699] ldo_io0: supplied by regulator-dummy [ 3.046608] random: fast init done [ 3.050928] ldo_io1: supplied by regulator-dummy [ 3.056849] axp20x-adc axp22x-adc: DMA mask not set [ 3.063874] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 3.074881] axp20x-i2c 0-0034: AXP20X driver loaded [ 3.082189] i2c i2c-1: using pinctrl states for GPIO recovery [ 3.088238] gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 3.097171] i2c i2c-1: using generic GPIOs for recovery [ 3.141663] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 3.149482] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 1500000) is a Allwinner sun4i [ 3.159912] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 3.163210] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 3.167915] libphy: sun4i_mii_bus: probed [ 3.260992] mmc0: new DDR MMC card at address 0001 [ 3.266708] mmcblk0: mmc0:0001 MMC64G 58.2 GiB [ 3.271653] mmcblk0boot0: mmc0:0001 MMC64G partition 1 4.00 MiB [ 3.278035] mmcblk0boot1: mmc0:0001 MMC64G partition 2 4.00 MiB [ 3.284301] mmcblk0rpmb: mmc0:0001 MMC64G partition 3 4.00 MiB, chardev (246:0) [ 3.295127] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 3.316867] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:a4:71 [ 3.326108] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 3.332469] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 3.338821] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 3.344947] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 3.352172] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 3.359425] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 3.364415] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 3.371200] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 3.376866] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 3.383202] libphy: stmmac: probed [ 3.645613] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.651222] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.659439] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 3.693179] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.700266] hub 1-0:1.0: USB hub found [ 3.704128] hub 1-0:1.0: 1 port detected [ 3.709324] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.714958] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.722948] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 3.753176] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.760159] hub 2-0:1.0: USB hub found [ 3.763991] hub 2-0:1.0: 1 port detected [ 3.769081] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.774703] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.782681] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.813530] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.820510] hub 3-0:1.0: USB hub found [ 3.824340] hub 3-0:1.0: 1 port detected [ 3.923265] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.929902] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.937879] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 4.018085] hub 4-0:1.0: USB hub found [ 4.021893] hub 4-0:1.0: 1 port detected [ 4.027031] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 4.033689] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 4.041610] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 4.118061] hub 5-0:1.0: USB hub found [ 4.121868] hub 5-0:1.0: 1 port detected [ 4.126975] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.133651] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 4.141445] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.148703] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 4.228064] hub 6-0:1.0: USB hub found [ 4.231886] hub 6-0:1.0: 1 port detected [ 4.244897] of_cfs_init [ 4.247468] of_cfs_init: OK [ 4.250978] ALSA device list: [ 4.254014] No soundcards found. [ 4.265422] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 4.285683] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 4.293001] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.382827] mmc1: host does not support reading read-only switch, assuming write-enable [ 4.393746] mmc1: new ultra high speed SDR104 SDXC card at address 59b4 [ 4.401250] mmcblk1: mmc1:59b4 USDU1 58.3 GiB [ 4.411520] mmcblk1: p1 [ 4.574081] EXT4-fs (mmcblk0p2): recovery complete [ 4.579793] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.588019] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.595555] devtmpfs: mounted [ 4.603342] Freeing unused kernel memory: 1024K [ 4.608118] Run /sbin/init as init process [ 4.901098] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.930004] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.975719] systemd[1]: Set hostname to . [ 5.760485] systemd[1]: Queued start job for default target Graphical Interface. [ 5.770213] random: systemd: uninitialized urandom read (16 bytes read) [ 5.781101] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.813471] random: systemd: uninitialized urandom read (16 bytes read) [ 5.821988] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.863448] random: systemd: uninitialized urandom read (16 bytes read) [ 5.872097] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.915215] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.954807] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.993836] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 6.033701] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 6.073706] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 6.085762] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 6.123830] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 6.153419] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 6.193386] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 6.224597] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 6.263825] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 6.314457] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.323806] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.364465] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.400899] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.434213] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.474349] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.488426] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.529461] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.569337] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.609936] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 6.651653] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 6.700490] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.740443] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.764074] fuse: init (API version 7.32) [ 6.775955] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.792029] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.845094] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.860962] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.875954] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.899414] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 6.907530] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 6.918716] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System 6.929869] systemd[1]: Mounted Kernel Trace File System. m. [ OK ] Mounted Kernel Trace File System. [ 6.996130] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. [ 7.046519] systemd[1]: modprobe@drm.service: Succeeded. [ 7.054267] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 7.095306] systemd[1]: modprobe@fuse.service: Succeeded. [ 7.102478] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 7.144240] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 7.396074] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 8.393604] Driver for 1-wire Dallas network protocol. [ 8.450700] w1_master_driver w1_bus_master1: Attaching one wire slave 28.00000017a119 crc 93 [ 8.654481] wbec-watchdog wbec-watchdog.3.auto: DMA mask not set [ 8.670861] wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set [ 8.674398] usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator [ 8.676890] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0 [ 8.695241] wbec-adc wbec-adc.1.auto: DMA mask not set [ 8.711091] wbec-power wbec-power.6.auto: DMA mask not set [ 8.714542] wbec-gpio wbec-gpio.2.auto: DMA mask not set [ 8.736196] iio-rescale vin-volt: using raw+scale source channel [ 8.744205] iio-rescale v33-volt: using raw+scale source channel [ 8.751965] iio-rescale v50-volt: using raw+scale source channel [ 8.772667] iio-rescale vbus-debug-volt: using raw+scale source channel [ 8.793654] iio-rescale vbus-network-volt: using raw+scale source channel [ 8.812109] iio-rescale a1-volt: using raw+scale source channel [ 8.830876] iio-rescale a2-volt: using raw+scale source channel [ 8.843826] iio-rescale a3-volt: using raw+scale source channel [ 8.857750] iio-rescale a4-volt: using raw+scale source channel [ 8.917091] Bluetooth: Core ver 2.22 [ 8.920917] NET: Registered protocol family 31 [ 8.925482] Bluetooth: HCI device and connection manager initialized [ 8.931903] Bluetooth: HCI socket layer initialized [ 8.936910] Bluetooth: L2CAP socket layer initialized [ 8.942030] Bluetooth: SCO socket layer initialized [ 8.998088] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.999737] usbcore: registered new interface driver btusb [ 9.001214] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723 [ 9.002176] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 9.002188] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin [ 9.004944] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin [ 9.005686] Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507 [ OK ] Found device /dev/ttyS0. [ 9.183611] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.206259] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ OK ] Found device /dev/mmcblk0p5. [ OK ] Found device /dev/mmcblk0p6. [ 9.396275] Bluetooth: hci0: RTL: fw version 0xd9b80b4f Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... [ 9.751321] RTW: rtl8733bu v5.13.0.1-112-g10248f4f3.20230626_COEX20230616-330e [ 9.758730] RTW: rtl8733bu BT-Coex version = COEX20230616-330e [ 9.773363] RTW: [HALMAC]135 [ 9.773363] HALMAC_MAJOR_VER = 1 [ 9.773363] HALMAC_PROTOTYPE_VER = 6 [ 9.773363] HALMAC_MINOR_VER = 6 [ 9.773363] HALMAC_PATCH_VER = 39 [ OK ] Reached target Hardware activated U[ 9.790070] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc SB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Reached target Swap. Starting Load/Save RF Kill Switch Status... [ OK ] Started Load/Save RF Kill Switch Status. [ 9.943008] RTW: hal_com_config_channel_plan chplan:0x7F [ OK ] Finished File System Check on /dev/mmcblk0p6. [ 10.105778] RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:34:dd:0c [ 10.114125] RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:34:dd:0c [ 10.122280] usbcore: registered new interface driver rtl8733bu Mounting /mnt/data... [ 10.211937] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 10.456345] systemd-journald[138]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config[ 10.476738] systemd-journald[138]: File /var/log/journal/9f75034cb9004cb7be7df6d9f4c14bd0/system.journal corrupted or uncleanly shut down, renaming and replacing. files... [ 10.683225] random: crng init done [ 10.686660] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Authorization Manager... [ 12.340902] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.346931] Bluetooth: BNEP filters: protocol multicast [ 12.346985] Bluetooth: BNEP socket layer initialized Starting User Login Management... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started Bluetooth service. [ OK ] Started Authorization Manager. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started WPA supplicant. [ OK ] Started User Login Management. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. [ OK ] Started Network Manager. Starting Network Manager Wait Online... Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ 14.345088] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 14.356674] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 14.364166] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 14.371852] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 14.381793] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 14.399544] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ 14.408066] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.237025] start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384) [ 20.288366] 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 1500000) is a Allwinner sun4i [ 20.450683] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 132, base_baud = 1500000) is a Allwinner sun4i [ 20.851295] ntc-thermistor wbmz4-battery-temp: Thermistor type: ncp15xh103 successfully probed. [ 21.942567] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 133, base_baud = 1500000) is a Allwinner sun4i [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started zigbee2mqtt. [ OK ] Started KNX Daemon. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Getty on tty1. Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Started OpenBSD Secure Shell server. Stopping KNX Daemon... [ OK ] Stopped KNX Daemon. Starting KNX Daemon... [ OK ] Finished Compensation of s…ice-tree (with opposite sign). [ OK ] Started KNX Daemon. [ OK ] Started Mosquitto MQTT Broker. [ OK ] Finished KNXD Configurator for Wiren Board. Starting Wiren Board Cloud Agent (default)... [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost… generating archive with data. [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. Starting Wiren Board MQTT to IEC 60870-5-104 gateway... [ OK ] Started Wiren Board MQTT KNX bridge. [ 25.511788] RTW: rtw_set_802_11_connect(wlan0) fw_state=0x00000008 [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board MQTT to Modbus gateway. [ OK ] Started metrics sender.. [ OK ] Started Virtual MQTT devic…r Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started MQTT Rule engine for Wiren Board. [ OK ] Started Wiren Board firmware update service. [ OK ] Started MQTT Driver for GPIO-controlled switches. [ 27.963080] RTW: start auth [ 27.977857] RTW: auth success, start assoc [ 27.995142] RTW: assoc success [ 28.009111] RTW: recv eapol packet 1/4 [ 28.017067] RTW: send eapol packet 2/4 [ 28.070368] RTW: recv eapol packet 3/4 [ 28.077072] RTW: send eapol packet 4/4 [ 28.091271] RTW: set pairwise key camid:0, addr:00:0c:42:b7:ac:03, kid:0, type:AES [ 28.093323] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 28.134627] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:1, type:AES [ OK ] Started A high performance…er and a reverse proxy server. Starting Initialize Wiren Board on successful boot... Starting USB Debug Network... [ OK ] Started Wiren Board MQTT to OPC UA gateway. Debian GNU/Linux 11 wirenboard-A3F7BNGZ ttyS0 wirenboard-A3F7BNGZ login: [ 30.674570] process '/usr/sbin/netplugd' started with executable stack [ 34.423753] vcc-gmac-phy: disabling [ 34.428061] dc5ldo: disabling [ 34.431889] dldo4: disabling [ 50.972238] Mass Storage Function, version: 2009/09/11 [ 50.977644] LUN: removable file: (no medium) [ 51.070908] using random self ethernet address [ 51.075532] using random host ethernet address [ 51.340378] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 51.345040] dbg0: MAC 1a:55:89:a2:69:43 [ 65.603395] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 65.875752] usb 3-1: USB disconnect, device number 2 [ 71.803635] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 72.046218] usbcore: registered new interface driver cdc_ether [ 72.069665] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 96:80:c2:d8:ce:7a [ 72.080359] usbcore: registered new interface driver rndis_host [ 72.094887] usbcore: registered new interface driver option [ 72.100666] usbserial: USB Serial support registered for GSM modem (1-port) [ 72.108623] option 3-1:1.2: GSM modem (1-port) converter detected [ 72.124909] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 72.132225] option 3-1:1.4: GSM modem (1-port) converter detected [ 72.139432] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 72.146861] option 3-1:1.5: GSM modem (1-port) converter detected [ 72.153952] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 72.161290] option 3-1:1.3: GSM modem (1-port) converter detected [ 72.168547] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 119.812836] usb 3-1: USB disconnect, device number 3 [ 119.818488] rndis_host 3-1:1.0 usb0: unregister 'rndis_host' usb-1c1c000.usb-1, RNDIS device [ 119.894812] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 119.903753] option 3-1:1.2: device disconnected [ 119.917067] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 119.925856] option 3-1:1.4: device disconnected [ 119.931562] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 119.939942] option 3-1:1.5: device disconnected [ 119.948310] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 [ 119.956854] option 3-1:1.3: device disconnected [EC] 3.3V is lost, try to reset power [EC] Enable WBMZ to prevent power loss under load U-Boot SPL 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) DRAM: 2048 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 2 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 1 ms (318.4 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502360 bytes read in 174 ms (35.6 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57964 bytes read in 5 ms (11.1 MiB/s) 254 bytes read in 2 ms (124 KiB/s) Applying DT overlay temp-commercial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x6337d8 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb172 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Oct 16 09:19:27 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0xbec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 2043848K/2097152K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 36920K reserved, 16384K cma-reserved, 1294324K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000023] Switching to timer-based delay loop, resolution 41ns [ 0.000400] Console: colour dummy device 80x30 [ 0.000479] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000511] pid_max: default: 32768 minimum: 301 [ 0.000764] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000791] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003569] CPU: Testing write buffer coherency: ok [ 0.004144] /cpus/cpu@0 missing clock-frequency property [ 0.004210] /cpus/cpu@1 missing clock-frequency property [ 0.004270] /cpus/cpu@2 missing clock-frequency property [ 0.004335] /cpus/cpu@3 missing clock-frequency property [ 0.004359] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005661] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.005877] rcu: Hierarchical SRCU implementation. [ 0.007946] smp: Bringing up secondary CPUs ... [ 0.019760] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031475] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.042897] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.043130] smp: Brought up 1 node, 4 CPUs [ 0.043176] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.043192] CPU: All CPU(s) started in HYP mode. [ 0.043206] CPU: Virtualization extensions available. [ 0.044486] devtmpfs: initialized [ 0.068252] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.068795] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.068853] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.070212] pinctrl core: initialized pinctrl subsystem [ 0.072287] NET: Registered protocol family 16 [ 0.076647] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.079322] thermal_sys: Registered thermal governor 'step_wise' [ 0.080156] No ATAGs? [ 0.080480] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.080506] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.168807] SCSI subsystem initialized [ 0.169127] usbcore: registered new interface driver usbfs [ 0.169200] usbcore: registered new interface driver hub [ 0.169282] usbcore: registered new device driver usb [ 0.169706] mc: Linux media interface: v0.10 [ 0.169776] videodev: Linux video capture interface: v2.00 [ 0.169855] pps_core: LinuxPPS API ver. 1 registered [ 0.169871] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.169901] PTP clock support registered [ 0.170205] Advanced Linux Sound Architecture Driver Initialized. [ 0.173029] clocksource: Switched to clocksource arch_sys_counter [ 1.311078] NET: Registered protocol family 2 [ 1.313251] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.313372] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.313554] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.313809] TCP: Hash tables configured (established 8192 bind 8192) [ 1.314083] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.314185] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.314564] NET: Registered protocol family 1 [ 1.315622] RPC: Registered named UNIX socket transport module. [ 1.315652] RPC: Registered udp transport module. [ 1.315669] RPC: Registered tcp transport module. [ 1.315684] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.318548] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.321131] Initialise system trusted keyrings [ 1.321449] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.337238] NFS: Registering the id_resolver key type [ 1.337303] Key type id_resolver registered [ 1.337321] Key type id_legacy registered [ 1.510397] Key type asymmetric registered [ 1.510441] Asymmetric key parser 'x509' registered [ 1.510719] bounce: pool size: 64 pages [ 1.510838] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.510867] io scheduler mq-deadline registered [ 1.510889] io scheduler kyber registered [ 1.512451] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.554632] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.578821] brd: module loaded [ 1.598013] loop: module loaded [ 1.607697] libphy: Fixed MDIO Bus: probed [ 1.609916] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.610765] libphy: sun4i_mii_bus: probed [ 1.614805] CAN device driver interface [ 1.617458] PPP generic driver version 2.4.2 [ 1.618588] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.618638] ehci-platform: EHCI generic platform driver [ 1.620586] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.620634] ohci-platform: OHCI generic platform driver [ 1.622063] usbcore: registered new interface driver usb-storage [ 1.622194] usbcore: registered new interface driver usbserial_generic [ 1.622239] usbserial: USB Serial support registered for generic [ 1.626371] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 1.626402] sun6i-rtc 1c20400.rtc: RTC enabled [ 1.627295] i2c /dev entries driver [ 1.638576] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.643858] ledtrig-cpu: registered to indicate activity on CPUs [ 1.644521] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.645590] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.646820] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.647210] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.647550] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.647789] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 1.648093] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 1.648367] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 1.648629] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 1.648894] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 1.652387] usbcore: registered new interface driver usbhid [ 1.652420] usbhid: USB HID core driver [ 1.662690] Initializing XFRM netlink socket [ 1.664088] NET: Registered protocol family 10 [ 1.665514] Segment Routing with IPv6 [ 1.665680] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.666487] NET: Registered protocol family 17 [ 1.666518] can: controller area network core [ 1.666621] NET: Registered protocol family 29 [ 1.666899] can: raw protocol [ 1.667014] can: broadcast manager protocol [ 1.667140] can: netlink gateway - max_hops=1 [ 1.667695] can: SAE J1939 [ 1.668430] Key type dns_resolver registered [ 1.668584] Registering SWP/SWPB emulation handler [ 1.668780] registered taskstats version 1 [ 1.668882] Loading compiled-in X.509 certificates [ 1.702952] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.709911] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.711971] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.718482] printk: console [ttyS0] disabled [ 1.718712] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 2.662622] printk: console [ttyS0] enabled [ 2.668926] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.675772] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.682389] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.689774] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.700518] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.719371] wbec-rtc wbec-rtc.4.auto: DMA mask not set [ 2.726470] wbec-rtc wbec-rtc.4.auto: registered as rtc0 [ 2.732578] wbec-rtc wbec-rtc.4.auto: setting system clock to 2024-12-23T17:12:21 UTC (1734973941) [ 2.746158] wbec spi0.0: WBEC device added [ 2.751249] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.760648] libphy: sun4i_mii_bus: probed [ 2.766947] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.773794] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.780413] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.790705] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.797677] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.804389] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.811885] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.822427] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.832104] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.838931] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.845390] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.852728] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.863283] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.882853] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.900732] vcc-3v3: supplied by regulator-dummy [ 2.906824] vdd-cpu: supplied by regulator-dummy [ 2.913610] vdd-sys: supplied by regulator-dummy [ 2.919822] dcdc4: supplied by regulator-dummy [ 2.925697] vcc-dram: supplied by regulator-dummy [ 2.930677] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.937748] vcc-gmac-phy: supplied by vcc-3v3 [ 2.943446] dc5ldo: supplied by vcc-dram [ 2.948060] tv: Bringing 700000uV into 3300000-3300000uV [ 2.954164] tv: supplied by regulator-dummy [ 2.959083] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.965515] aldo2: supplied by regulator-dummy [ 2.971424] avcc-pll: supplied by regulator-dummy [ 2.977198] eldo1: supplied by regulator-dummy [ 2.982636] eldo2: supplied by regulator-dummy [ 2.987784] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.995676] vcc-pe: supplied by regulator-dummy [ 3.001181] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 3.008408] vcc-sd-alt: supplied by regulator-dummy [ 3.014439] dldo2: supplied by regulator-dummy [ 3.020001] dldo3: supplied by regulator-dummy [ 3.025557] dldo4: supplied by regulator-dummy [ 3.030714] rtc_ldo: supplied by regulator-dummy [ 3.036386] ldo_io0: supplied by regulator-dummy [ 3.041315] random: fast init done [ 3.045676] ldo_io1: supplied by regulator-dummy [ 3.051479] axp20x-adc axp22x-adc: DMA mask not set [ 3.058490] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 3.069500] axp20x-i2c 0-0034: AXP20X driver loaded [ 3.077038] i2c i2c-1: using pinctrl states for GPIO recovery [ 3.082956] gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 3.091911] i2c i2c-1: using generic GPIOs for recovery [ 3.138737] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 3.146605] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 1500000) is a Allwinner sun4i [ 3.157037] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 3.161522] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 3.165047] libphy: sun4i_mii_bus: probed [ 3.260205] mmc0: new DDR MMC card at address 0001 [ 3.265923] mmcblk0: mmc0:0001 MMC64G 58.2 GiB [ 3.270864] mmcblk0boot0: mmc0:0001 MMC64G partition 1 4.00 MiB [ 3.277265] mmcblk0boot1: mmc0:0001 MMC64G partition 2 4.00 MiB [ 3.283535] mmcblk0rpmb: mmc0:0001 MMC64G partition 3 4.00 MiB, chardev (246:0) [ 3.294295] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 3.316726] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:a4:71 [ 3.325903] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 3.332262] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 3.338660] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 3.344774] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 3.351999] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 3.359246] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 3.364236] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 3.371021] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 3.376692] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 3.383042] libphy: stmmac: probed [ 3.645451] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.651059] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.659319] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 3.693020] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.700107] hub 1-0:1.0: USB hub found [ 3.703974] hub 1-0:1.0: 1 port detected [ 3.709126] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.714770] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.722754] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 3.753017] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.760048] hub 2-0:1.0: USB hub found [ 3.763890] hub 2-0:1.0: 1 port detected [ 3.768968] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.774585] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.782564] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.813408] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.820374] hub 3-0:1.0: USB hub found [ 3.824201] hub 3-0:1.0: 1 port detected [ 3.923107] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.929744] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.937718] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 4.017882] hub 4-0:1.0: USB hub found [ 4.021688] hub 4-0:1.0: 1 port detected [ 4.026809] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 4.033479] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 4.041393] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 4.117891] hub 5-0:1.0: USB hub found [ 4.121701] hub 5-0:1.0: 1 port detected [ 4.126824] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.133500] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 4.141293] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.148555] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 4.227916] hub 6-0:1.0: USB hub found [ 4.231722] hub 6-0:1.0: 1 port detected [ 4.244794] of_cfs_init [ 4.247368] of_cfs_init: OK [ 4.250880] ALSA device list: [ 4.253907] No soundcards found. [ 4.264895] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 4.285327] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 4.292660] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.379965] mmc1: host does not support reading read-only switch, assuming write-enable [ 4.390897] mmc1: new ultra high speed SDR104 SDXC card at address 59b4 [ 4.398400] mmcblk1: mmc1:59b4 USDU1 58.3 GiB [ 4.408656] mmcblk1: p1 [ 4.479698] EXT4-fs (mmcblk0p2): recovery complete [ 4.485575] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.493780] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.501315] devtmpfs: mounted [ 4.509145] Freeing unused kernel memory: 1024K [ 4.513962] Run /sbin/init as init process [ 4.809499] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.833813] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.885262] systemd[1]: Set hostname to . [ 5.666319] systemd[1]: Queued start job for default target Graphical Interface. [ 5.675746] random: systemd: uninitialized urandom read (16 bytes read) [ 5.686626] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.723300] random: systemd: uninitialized urandom read (16 bytes read) [ 5.731839] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.773362] random: systemd: uninitialized urandom read (16 bytes read) [ 5.782183] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.825059] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.864628] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.903717] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.943534] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.983550] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.995631] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 6.033685] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 6.063273] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 6.103234] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 6.134545] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 6.173672] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 6.224265] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.233556] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.274206] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.310853] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.343933] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.384198] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.398363] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.439210] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.479343] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.519890] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 6.561294] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 6.610365] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.650406] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.674068] fuse: init (API version 7.32) [ 6.685749] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.701720] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.755796] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.771592] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.786957] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.809651] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 6.817622] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 6.828564] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System 6.840036] systemd[1]: Mounted Kernel Trace File System. m. [ OK ] Mounted Kernel Trace File System 6.852734] systemd[1]: Finished Create list of static device nodes for the current kernel. m. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.936830] systemd[1]: modprobe@drm.service: Succeeded. [ 6.944255] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.985428] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.992547] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 7.033966] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 7.274621] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 8.262361] Driver for 1-wire Dallas network protocol. [ 8.398942] w1_master_driver w1_bus_master1: Attaching one wire slave 28.00000017a119 crc 93 [ 8.512899] wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set [ 8.519027] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0 [ 8.544906] wbec-adc wbec-adc.1.auto: DMA mask not set [ 8.550153] wbec-watchdog wbec-watchdog.3.auto: DMA mask not set [ 8.552644] wbec-power wbec-power.6.auto: DMA mask not set [ 8.576005] iio-rescale vin-volt: using raw+scale source channel [ 8.583714] iio-rescale v33-volt: using raw+scale source channel [ 8.594543] usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator [ 8.604923] wbec-gpio wbec-gpio.2.auto: DMA mask not set [ 8.624949] iio-rescale v50-volt: using raw+scale source channel [ 8.661813] iio-rescale vbus-debug-volt: using raw+scale source channel [ 8.724948] iio-rescale vbus-network-volt: using raw+scale source channel [ 8.768554] Bluetooth: Core ver 2.22 [ 8.772307] NET: Registered protocol family 31 [ 8.777449] Bluetooth: HCI device and connection manager initialized [ 8.783120] iio-rescale a1-volt: using raw+scale source channel [ 8.783883] Bluetooth: HCI socket layer initialized [ 8.792541] iio-rescale a2-volt: using raw+scale source channel [ 8.794704] Bluetooth: L2CAP socket layer initialized [ 8.805807] Bluetooth: SCO socket layer initialized [ 8.831191] usbcore: registered new interface driver btusb [ 8.841038] iio-rescale a3-volt: using raw+scale source channel [ 8.854951] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723 [ 8.856683] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.873174] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 8.879240] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin [ 8.889910] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin [ 8.898168] Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507 [ 8.911006] iio-rescale a4-volt: using raw+scale source channel [ 8.921897] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.937773] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 9.212625] RTW: rtl8733bu v5.13.0.1-112-g10248f4f3.20230626_COEX20230616-330e [ 9.220002] RTW: rtl8733bu BT-Coex version = COEX20230616-330e [ 9.230638] RTW: [HALMAC]135 [ 9.230638] HALMAC_MAJOR_VER = 1 [ 9.230638] HALMAC_PROTOTYPE_VER = 6 [ 9.230638] HALMAC_MINOR_VER = 6 [ 9.230638] HALMAC_PATCH_VER = 39 [ 9.384965] Bluetooth: hci0: RTL: fw version 0xd9b80b4f [ 9.435074] RTW: hal_com_config_channel_plan chplan:0x7F [ OK ] Found device /dev/mmcblk0p6. [ OK ] Found device /dev/mmcblk0p5. [ 9.632097] RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:34:dd:0c [ 9.640078] RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:34:dd:0c [ 9.648205] usbcore: registered new interface driver rtl8733bu [ OK ] Found device /dev/ttyS0. [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... Starting Load/Save RF Kill Switch Status... [ 10.163100] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Reached target Swap. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 10.403241] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ OK ] Reached target Local File Systems. [ 10.543073] random: crng init done [ 10.546497] random: 7 urandom warning(s) missed due to ratelimiting Starting Flush Journal to Persistent Storage... Starting prepare mounts and symlinks to config[ 10.613682] systemd-journald[139]: Received client request to flush runtime journal. files... [ 10.638081] systemd-journald[139]: File /var/log/journal/9f75034cb9004cb7be7df6d9f4c14bd0/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Authorization Manager... [ 12.419723] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.425152] Bluetooth: BNEP filters: protocol multicast [ 12.430422] Bluetooth: BNEP socket layer initialized Starting User Login Management... [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started Bluetooth service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Authorization Manager. [ OK ] Started WPA supplicant. [ OK ] Started User Login Management. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. [ OK ] Started Network Manager. Starting Network Manager Wait Online... Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ 14.554786] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 14.571583] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 14.573239] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 14.579051] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 14.594957] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 14.604166] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ 14.612939] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.408896] start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384) [ 20.401583] 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 1500000) is a Allwinner sun4i [ 20.560480] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 132, base_baud = 1500000) is a Allwinner sun4i [ 20.945319] ntc-thermistor wbmz4-battery-temp: Thermistor type: ncp15xh103 successfully probed. [ 22.026701] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 133, base_baud = 1500000) is a Allwinner sun4i [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started zigbee2mqtt. [ OK ] Started KNX Daemon. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Getty on tty1. Stopping KNX Daemon... Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Started OpenBSD Secure Shell server. [ OK ] Stopped KNX Daemon. Starting KNX Daemon... [ OK ] Started KNX Daemon. [ OK ] Finished KNXD Configurator for Wiren Board. [ OK ] Finished Compensation of s…ice-tree (with opposite sign). [ OK ] Started MQTT Driver for GPIO-controlled switches. [ OK ] Started Mosquitto MQTT Broker. Starting Wiren Board Cloud Agent (default)... [ OK ] Started Wiren Board modbus devices manager. [ 25.664941] RTW: rtw_set_802_11_connect(wlan0) fw_state=0x00000008 [ OK ] Started one-click diagnost… generating archive with data. [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. Starting Wiren Board MQTT to IEC 60870-5-104 gateway... [ OK ] Started Wiren Board MQTT KNX bridge. [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board MQTT to Modbus gateway. [ OK ] Started metrics sender.. [ OK ] Started Virtual MQTT devic…r Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started MQTT Rule engine for Wiren Board. [ OK ] Started Wiren Board firmware update service. [ 28.078609] RTW: start auth [ 28.084340] RTW: auth success, start assoc [ 28.096480] RTW: assoc success [ 28.110639] RTW: recv eapol packet 1/4 [ 28.115972] RTW: send eapol packet 2/4 [ 28.233639] RTW: recv eapol packet 3/4 [ 28.238277] RTW: send eapol packet 4/4 [ 28.245838] RTW: set pairwise key camid:0, addr:00:0c:42:b7:ac:03, kid:0, type:AES [ 28.249285] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 28.314587] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:1, type:AES [ OK ] Finished Network Manager Wait Online. [ OK ] Reached target Network is Online. Starting LSB: Brings up/down network automatically... [ OK ] Started A high performance…er and a reverse proxy server. [ 30.177478] process '/usr/sbin/netplugd' started with executable stack Debian GNU/Linux 11 wirenboard-A3F7BNGZ ttyS0 wirenboard-A3F7BNGZ login: [ 34.413221] vcc-gmac-phy: disabling [ 34.417222] dc5ldo: disabling [ 34.420998] dldo4: disabling [ 51.043002] Mass Storage Function, version: 2009/09/11 [ 51.048360] LUN: removable file: (no medium) [ 51.108747] using random self ethernet address [ 51.113629] using random host ethernet address [ 51.431394] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 51.436062] dbg0: MAC 1a:55:89:a2:69:43 [ 65.333214] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 65.621872] usb 3-1: USB disconnect, device number 2 [ 71.553227] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 71.815004] usbcore: registered new interface driver cdc_ether [ 71.832929] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, da:41:26:48:46:0a [ 71.843628] usbcore: registered new interface driver rndis_host [ 71.863731] usbcore: registered new interface driver option [ 71.869510] usbserial: USB Serial support registered for GSM modem (1-port) [ 71.877506] option 3-1:1.2: GSM modem (1-port) converter detected [ 71.889155] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 71.896605] option 3-1:1.4: GSM modem (1-port) converter detected [ 71.903675] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 71.911009] option 3-1:1.5: GSM modem (1-port) converter detected [ 71.918290] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 71.925808] option 3-1:1.3: GSM modem (1-port) converter detected [ 71.932950] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 118.894987] usb 3-1: USB disconnect, device number 3 [ 118.900420] rndis_host 3-1:1.0 usb0: unregister 'rndis_host' usb-1c1c000.usb-1, RNDIS device [ 118.993544] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 119.001948] option 3-1:1.2: device disconnected [ 119.011691] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 119.020099] option 3-1:1.4: device disconnected [ 119.027915] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 119.036415] option 3-1:1.5: device disconnected [ 119.041978] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 [ 119.050305] option 3-1:1.3: device disconnected [EC] 3.3V is lost, try to reset power [EC] Enable WBMZ to prevent power loss under load U-Boot SPL 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) DRAM: 2048 MiB Trying to boot from MMC2 U-Boot 2021.10-wb1.7.0-gc221f7953f (Jul 26 2023 - 08:32:47 +0000) CPU: Allwinner R40 (SUN8I 1701) Model: Wiren Board rev. 7.2.0 (A40i) I2C: ready DRAM: 2 GiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from MMC... OK In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Will only keep env vars: mmcpart bootcount upgrade_available uenvcmd wb_webupd otp_program otp_aes_program ## Info: input data size = 142 = 0x8E bootcount=0 mmcpart=2 uenvcmd=true ; echo reset environment; env default -a; setenv mmcdev 0; saveenv; bmode emmc; reset upgrade_available=0 Environment size: 142/131068 bytes ## Resetting to default environment ## Info: input data size = 142 = 0x8E Net: No ethernet found. Hit key to stop autoboot in 1s ## Info: input data size = 4281 = 0x10B9 switch to partitions #0, OK mmc1(part 0) is current device eMMC found on device 1 Press FW button to enter firmware update mode ................................................ 326 bytes read in 3 ms (105.5 KiB/s) Importing environment from 0x42000000... Checking if uenvcmd is set ... test - minimal test like /bin/sh Usage: test [args..] Running default loadzimage ... 6502360 bytes read in 174 ms (35.6 MiB/s) MMC read: dev # 1, block # 2016, count 32 ... 32 blocks read: OK Reading overlays list from eMMC Reading factory fdt name from eMMC Loading factory fdt sun8i-r40-wirenboard742 57964 bytes read in 6 ms (9.2 MiB/s) 254 bytes read in 3 ms (82 KiB/s) Applying DT overlay temp-commercial Applying extra overlay Booting from mmc ... Kernel image @ 0x42000000 [ 0x000000 - 0x6337d8 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fdd000, end 49ffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.35-wb172 (root@wbdevenv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Oct 16 09:19:27 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wiren Board rev. 7.4.2 (A40i) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0xbec00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait ro [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 2043848K/2097152K available (10240K kernel code, 1478K rwdata, 3236K rodata, 1024K init, 306K bss, 36920K reserved, 16384K cma-reserved, 1294324K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31979 entries in 63 pages [ 0.000000] ftrace: allocated 63 pages with 6 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x660/0x844 with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000024] Switching to timer-based delay loop, resolution 41ns [ 0.000405] Console: colour dummy device 80x30 [ 0.000483] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000514] pid_max: default: 32768 minimum: 301 [ 0.000768] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000796] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003541] CPU: Testing write buffer coherency: ok [ 0.004131] /cpus/cpu@0 missing clock-frequency property [ 0.004196] /cpus/cpu@1 missing clock-frequency property [ 0.004259] /cpus/cpu@2 missing clock-frequency property [ 0.004326] /cpus/cpu@3 missing clock-frequency property [ 0.004350] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005684] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.005907] rcu: Hierarchical SRCU implementation. [ 0.007877] smp: Bringing up secondary CPUs ... [ 0.019783] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.031528] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.042971] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.043205] smp: Brought up 1 node, 4 CPUs [ 0.043251] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.043268] CPU: All CPU(s) started in HYP mode. [ 0.043283] CPU: Virtualization extensions available. [ 0.044557] devtmpfs: initialized [ 0.068176] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.068765] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.068826] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.070235] pinctrl core: initialized pinctrl subsystem [ 0.071988] NET: Registered protocol family 16 [ 0.076698] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.079275] thermal_sys: Registered thermal governor 'step_wise' [ 0.080146] No ATAGs? [ 0.080484] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.080509] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.169029] SCSI subsystem initialized [ 0.169346] usbcore: registered new interface driver usbfs [ 0.169419] usbcore: registered new interface driver hub [ 0.169499] usbcore: registered new device driver usb [ 0.169921] mc: Linux media interface: v0.10 [ 0.169990] videodev: Linux video capture interface: v2.00 [ 0.170073] pps_core: LinuxPPS API ver. 1 registered [ 0.170088] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.170120] PTP clock support registered [ 0.170863] Advanced Linux Sound Architecture Driver Initialized. [ 0.173305] clocksource: Switched to clocksource arch_sys_counter [ 1.311537] NET: Registered protocol family 2 [ 1.314150] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.314246] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.314391] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.314597] TCP: Hash tables configured (established 8192 bind 8192) [ 1.314826] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.314920] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.315256] NET: Registered protocol family 1 [ 1.316208] RPC: Registered named UNIX socket transport module. [ 1.316236] RPC: Registered udp transport module. [ 1.316250] RPC: Registered tcp transport module. [ 1.316265] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.319479] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.321739] Initialise system trusted keyrings [ 1.322037] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.337863] NFS: Registering the id_resolver key type [ 1.337948] Key type id_resolver registered [ 1.337965] Key type id_legacy registered [ 1.513584] Key type asymmetric registered [ 1.513613] Asymmetric key parser 'x509' registered [ 1.513773] bounce: pool size: 64 pages [ 1.513854] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.514077] io scheduler mq-deadline registered [ 1.514210] io scheduler kyber registered [ 1.516811] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.557482] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.583220] brd: module loaded [ 1.600971] loop: module loaded [ 1.611142] libphy: Fixed MDIO Bus: probed [ 1.613550] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 1.614850] libphy: sun4i_mii_bus: probed [ 1.617423] CAN device driver interface [ 1.621730] PPP generic driver version 2.4.2 [ 1.622034] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.622056] ehci-platform: EHCI generic platform driver [ 1.623964] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.624082] ohci-platform: OHCI generic platform driver [ 1.626295] usbcore: registered new interface driver usb-storage [ 1.626459] usbcore: registered new interface driver usbserial_generic [ 1.626516] usbserial: USB Serial support registered for generic [ 1.629994] sun6i-rtc 1c20400.rtc: registered as rtc1 [ 1.630043] sun6i-rtc 1c20400.rtc: RTC enabled [ 1.631350] i2c /dev entries driver [ 1.642750] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.648142] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648975] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.649370] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.649943] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.650164] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.650378] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority [ 1.651271] sun8i-ce 1c15000.crypto: Register cbc(aes) [ 1.651856] sun8i-ce 1c15000.crypto: Register ecb(aes) [ 1.652280] sun8i-ce 1c15000.crypto: Register cbc(des3_ede) [ 1.652637] sun8i-ce 1c15000.crypto: Register ecb(des3_ede) [ 1.652996] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0 [ 1.655402] usbcore: registered new interface driver usbhid [ 1.655425] usbhid: USB HID core driver [ 1.665993] Initializing XFRM netlink socket [ 1.666753] NET: Registered protocol family 10 [ 1.669495] Segment Routing with IPv6 [ 1.669706] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.670697] NET: Registered protocol family 17 [ 1.670734] can: controller area network core [ 1.670857] NET: Registered protocol family 29 [ 1.670876] can: raw protocol [ 1.670894] can: broadcast manager protocol [ 1.670919] can: netlink gateway - max_hops=1 [ 1.671099] can: SAE J1939 [ 1.671445] Key type dns_resolver registered [ 1.671544] Registering SWP/SWPB emulation handler [ 1.671672] registered taskstats version 1 [ 1.671739] Loading compiled-in X.509 certificates [ 1.706447] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 1.714270] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.715229] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 1.721345] printk: console [ttyS0] disabled [ 1.722145] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1500000) is a Allwinner sun4i [ 2.667172] printk: console [ttyS0] enabled [ 2.673911] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PI regulator [ 2.680719] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 274 [ 2.687378] sun4i-pinctrl 1c20800.pinctrl: pin-274 (1c28800.serial) status -517 [ 2.694763] sun4i-pinctrl 1c20800.pinctrl: could not request pin 274 (PI18) from group PI18 on device 1c20800.pinctrl [ 2.705530] dw-apb-uart 1c28800.serial: Error applying setting, reverse things back [ 2.724351] wbec-rtc wbec-rtc.4.auto: DMA mask not set [ 2.731111] wbec-rtc wbec-rtc.4.auto: registered as rtc0 [ 2.736737] wbec-rtc wbec-rtc.4.auto: setting system clock to 2024-12-23T17:14:34 UTC (1734974074) [ 2.749841] wbec spi0.0: WBEC device added [ 2.755776] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 2.763957] libphy: sun4i_mii_bus: probed [ 2.769205] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.776240] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 236 [ 2.782894] sun4i-pinctrl 1c20800.pinctrl: pin-236 (1c20800.pinctrl:236) status -517 [ 2.794078] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PH regulator [ 2.800887] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 232 [ 2.807532] sun4i-pinctrl 1c20800.pinctrl: pin-232 (1c0b000.ethernet) status -517 [ 2.815073] sun4i-pinctrl 1c20800.pinctrl: could not request pin 232 (PH8) from group PH8 on device 1c20800.pinctrl [ 2.825677] sun4i-emac 1c0b000.ethernet: Error applying setting, reverse things back [ 2.834289] sun4i-pinctrl 1c20800.pinctrl: Couldn't get bank PA regulator [ 2.841230] sun4i-pinctrl 1c20800.pinctrl: request() failed for pin 0 [ 2.847815] sun4i-pinctrl 1c20800.pinctrl: pin-0 (1c50000.ethernet) status -517 [ 2.855163] sun4i-pinctrl 1c20800.pinctrl: could not request pin 0 (PA0) from group PA0 on device 1c20800.pinctrl [ 2.865558] dwmac-sun8i 1c50000.ethernet: Error applying setting, reverse things back [ 2.885872] axp20x-i2c 0-0034: AXP20x variant AXP221 found [ 2.904457] vcc-3v3: supplied by regulator-dummy [ 2.910243] vdd-cpu: supplied by regulator-dummy [ 2.916069] vdd-sys: supplied by regulator-dummy [ 2.921767] dcdc4: supplied by regulator-dummy [ 2.927303] vcc-dram: supplied by regulator-dummy [ 2.932203] vcc-gmac-phy: failed to get the current voltage: -EPROBE_DEFER [ 2.939234] vcc-gmac-phy: supplied by vcc-3v3 [ 2.945275] dc5ldo: supplied by vcc-dram [ 2.949853] tv: Bringing 700000uV into 3300000-3300000uV [ 2.956796] tv: supplied by regulator-dummy [ 2.962360] aldo2: Bringing 2500000uV into 3300000-3300000uV [ 2.969124] aldo2: supplied by regulator-dummy [ 2.975426] avcc-pll: supplied by regulator-dummy [ 2.981346] eldo1: supplied by regulator-dummy [ 2.986987] eldo2: supplied by regulator-dummy [ 2.992162] vcc-pe: Bringing 1200000uV into 1800000-1800000uV [ 2.999113] vcc-pe: supplied by regulator-dummy [ 3.004314] vcc-sd-alt: Bringing 700000uV into 1800000-1800000uV [ 3.012292] vcc-sd-alt: supplied by regulator-dummy [ 3.018674] dldo2: supplied by regulator-dummy [ 3.024536] dldo3: supplied by regulator-dummy [ 3.030216] dldo4: supplied by regulator-dummy [ 3.035561] rtc_ldo: supplied by regulator-dummy [ 3.041293] ldo_io0: supplied by regulator-dummy [ 3.046314] random: fast init done [ 3.050765] ldo_io1: supplied by regulator-dummy [ 3.056791] axp20x-adc axp22x-adc: DMA mask not set [ 3.063861] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 3.074922] axp20x-i2c 0-0034: AXP20X driver loaded [ 3.082121] i2c i2c-1: using pinctrl states for GPIO recovery [ 3.088201] gpio-50 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 3.097137] i2c i2c-1: using generic GPIOs for recovery [ 3.137013] sun4i-usb-phy 1c13400.phy: phy0 dr_mode=3 [ 3.145361] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 54, base_baud = 1500000) is a Allwinner sun4i [ 3.155776] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulator [ 3.163794] libphy: sun4i_mii_bus: probed [ 3.168630] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 3.262033] mmc0: new DDR MMC card at address 0001 [ 3.267742] mmcblk0: mmc0:0001 MMC64G 58.2 GiB [ 3.272685] mmcblk0boot0: mmc0:0001 MMC64G partition 1 4.00 MiB [ 3.279149] mmcblk0boot1: mmc0:0001 MMC64G partition 2 4.00 MiB [ 3.285407] mmcblk0rpmb: mmc0:0001 MMC64G partition 3 4.00 MiB, chardev (246:0) [ 3.296230] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 3.307200] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 66 MAC: 00:85:01:01:a4:71 [ 3.316458] dwmac-sun8i 1c50000.ethernet: IRQ eth_wake_irq not found [ 3.322817] dwmac-sun8i 1c50000.ethernet: IRQ eth_lpi not found [ 3.329216] dwmac-sun8i 1c50000.ethernet: PTP uses main clock [ 3.335387] dwmac-sun8i 1c50000.ethernet: No HW DMA feature register supported [ 3.342615] dwmac-sun8i 1c50000.ethernet: RX Checksum Offload Engine supported [ 3.349877] dwmac-sun8i 1c50000.ethernet: COE Type 2 [ 3.354864] dwmac-sun8i 1c50000.ethernet: TX Checksum insertion supported [ 3.361649] dwmac-sun8i 1c50000.ethernet: Normal descriptors [ 3.367334] dwmac-sun8i 1c50000.ethernet: Chain mode enabled [ 3.373698] libphy: stmmac: probed [ 3.635714] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.641324] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.649562] ehci-platform 1c14000.usb: irq 38, io mem 0x01c14000 [ 3.683288] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.690378] hub 1-0:1.0: USB hub found [ 3.694240] hub 1-0:1.0: 1 port detected [ 3.699391] ehci-platform 1c19000.usb: EHCI Host Controller [ 3.705036] ehci-platform 1c19000.usb: new USB bus registered, assigned bus number 2 [ 3.713027] ehci-platform 1c19000.usb: irq 40, io mem 0x01c19000 [ 3.743285] ehci-platform 1c19000.usb: USB 2.0 started, EHCI 1.00 [ 3.750315] hub 2-0:1.0: USB hub found [ 3.754159] hub 2-0:1.0: 1 port detected [ 3.759270] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.764890] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 [ 3.772868] ehci-platform 1c1c000.usb: irq 42, io mem 0x01c1c000 [ 3.803660] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.810617] hub 3-0:1.0: USB hub found [ 3.814456] hub 3-0:1.0: 1 port detected [ 3.913377] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.920013] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 [ 3.927992] ohci-platform 1c14400.usb: irq 39, io mem 0x01c14400 [ 4.008159] hub 4-0:1.0: USB hub found [ 4.011967] hub 4-0:1.0: 1 port detected [ 4.017085] ohci-platform 1c19400.usb: Generic Platform OHCI controller [ 4.023755] ohci-platform 1c19400.usb: new USB bus registered, assigned bus number 5 [ 4.031666] ohci-platform 1c19400.usb: irq 41, io mem 0x01c19400 [ 4.108169] hub 5-0:1.0: USB hub found [ 4.112014] hub 5-0:1.0: 1 port detected [ 4.117146] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.123824] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 6 [ 4.131614] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 4.138875] ohci-platform 1c1c400.usb: irq 43, io mem 0x01c1c400 [ 4.218220] hub 6-0:1.0: USB hub found [ 4.222029] hub 6-0:1.0: 1 port detected [ 4.235163] of_cfs_init [ 4.237733] of_cfs_init: OK [ 4.241242] ALSA device list: [ 4.244262] No soundcards found. [ 4.255599] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 4.275985] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 4.283375] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.371078] mmc1: host does not support reading read-only switch, assuming write-enable [ 4.375027] EXT4-fs (mmcblk0p2): recovery complete [ 4.382035] mmc1: new ultra high speed SDR104 SDXC card at address 59b4 [ 4.384821] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.391393] mmcblk1: mmc1:59b4 USDU1 58.3 GiB [ 4.398751] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.408849] mmcblk1: p1 [ 4.411149] devtmpfs: mounted [ 4.421487] Freeing unused kernel memory: 1024K [ 4.453534] Run /sbin/init as init process [ 4.745115] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.774058] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 4.815109] systemd[1]: Set hostname to . [ 5.585139] systemd[1]: Queued start job for default target Graphical Interface. [ 5.594540] random: systemd: uninitialized urandom read (16 bytes read) [ 5.605842] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.643537] random: systemd: uninitialized urandom read (16 bytes read) [ 5.652104] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.693607] random: systemd: uninitialized urandom read (16 bytes read) [ 5.702403] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.745343] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ OK ] Created slice system-systemd\x2dfsck.slice. [ 5.784943] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.823977] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.863786] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.903836] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.915929] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 5.953929] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.983598] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 6.023482] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 6.054824] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 6.093962] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 6.144529] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.153860] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.194561] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.241022] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.274395] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.314477] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.328598] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.369510] systemd[1]: Mounting /sys/kernel/config... Mounting /sys/kernel/config... [ 6.409479] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.450132] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 6.491816] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 6.540522] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.580559] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.604281] fuse: init (API version 7.32) [ 6.616083] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.632027] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 6.684865] systemd[1]: Starting Journal Service... Starting Journal Service... [ 6.700593] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 6.715358] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.742868] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 6.750606] systemd[1]: Mounted /sys/kernel/config. stem. [ OK ] Mounted /sys/kernel/config. [ 6.761677] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 6.804784] systemd[1]: Mounted Kernel Trace File System. [ OK ] Mounted Kernel Trace File System. [ 6.845947] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. [ 6.896737] systemd[1]: modprobe@drm.service: Succeeded. [ 6.903623] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 6.945491] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.952464] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 6.994905] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... [ OK ] Started File System Check Daemon to report status. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 7.234364] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro [ OK ] Mounted FUSE Control File System. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Set up automount mnt-sdcard.automount. Starting Helper to synchronize boot up for ifupdown... Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ 8.219404] Driver for 1-wire Dallas network protocol. [ 8.305899] w1_master_driver w1_bus_master1: Attaching one wire slave 28.00000017a119 crc 93 [ 8.506324] usb_phy_generic usb_phy_generic.7.auto: supply vcc not found, using dummy regulator [ 8.555861] wbec-watchdog wbec-watchdog.3.auto: DMA mask not set [ 8.568111] wbec-pwrkey wbec-pwrkey.5.auto: DMA mask not set [ 8.568117] wbec-power wbec-power.6.auto: DMA mask not set [ 8.579800] wbec-adc wbec-adc.1.auto: DMA mask not set [ 8.596288] input: wbec pwrkey as /devices/platform/soc/1c17000.spi/spi_master/spi0/spi0.0/wbec-pwrkey.5.auto/input/input0 [ 8.614267] wbec-gpio wbec-gpio.2.auto: DMA mask not set [ 8.635178] iio-rescale vin-volt: using raw+scale source channel [ 8.646031] iio-rescale v33-volt: using raw+scale source channel [ 8.689680] iio-rescale v50-volt: using raw+scale source channel [ 8.709187] iio-rescale vbus-debug-volt: using raw+scale source channel [ 8.717392] iio-rescale vbus-network-volt: using raw+scale source channel [ 8.745398] Bluetooth: Core ver 2.22 [ 8.746042] iio-rescale a1-volt: using raw+scale source channel [ 8.749118] NET: Registered protocol family 31 [ 8.757753] iio-rescale a2-volt: using raw+scale source channel [ 8.759469] Bluetooth: HCI device and connection manager initialized [ 8.771816] Bluetooth: HCI socket layer initialized [ 8.776790] Bluetooth: L2CAP socket layer initialized [ 8.781914] Bluetooth: SCO socket layer initialized [ 8.782501] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.807048] iio-rescale a3-volt: using raw+scale source channel [ 8.814228] iio-rescale a4-volt: using raw+scale source channel [ 8.849098] usbcore: registered new interface driver btusb [ 8.882374] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000f lmp_ver=08 lmp_subver=8723 [ 8.893413] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 8.899470] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_fw.bin [ 8.915275] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723fu_config.bin [ 8.922710] Bluetooth: hci0: RTL: cfg_sz 14, total sz 37507 [ 9.006755] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.021016] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ OK ] Found device /dev/ttyS0. [ 9.275688] RTW: rtl8733bu v5.13.0.1-112-g10248f4f3.20230626_COEX20230616-330e [ 9.282942] RTW: rtl8733bu BT-Coex version = COEX20230616-330e [ 9.289807] RTW: [HALMAC]135 [ 9.289807] HALMAC_MAJOR_VER = 1 [ 9.289807] HALMAC_PROTOTYPE_VER = 6 [ 9.289807] HALMAC_MINOR_VER = 6 [ 9.289807] HALMAC_PATCH_VER = 39 [ 9.329241] Bluetooth: hci0: RTL: fw version 0xd9b80b4f [ 9.472342] RTW: hal_com_config_channel_plan chplan:0x7F [ OK ] Found device /dev/mmcblk0p5. [ 9.661511] RTW: rtw_ndev_init(wlan0) if1 mac_addr=98:03:cf:34:dd:0c [ 9.669647] RTW: rtw_ndev_init(wlan1) if2 mac_addr=9a:03:cf:34:dd:0c [ OK ] Found device /dev/mmcblk0p6.[ 9.678466] usbcore: registered new interface driver rtl8733bu [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Activating swap /dev/mmcblk0p5... Starting File System Check on /dev/mmcblk0p6... Starting Load/Save RF Kill Switch Status... [ 10.163359] Adding 262140k swap on /dev/mmcblk0p5. Priority:-2 extents:1 across:262140k SSDsc [ OK ] Activated swap /dev/mmcblk0p5. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Reached target Swap. [ OK ] Finished File System Check on /dev/mmcblk0p6. Mounting /mnt/data... [ 10.411511] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard [ OK ] Mounted /mnt/data. Mounting /var/log... [ OK ] Mounted /var/log. [ 10.523338] random: crng init done [ 10.526762] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Reached target Local File Systems. Starting Flush Journal to Persistent Storage... [ 10.646213] systemd-journald[140]: Received client request to flush runtime journal. Starting prepare mounts and symlinks to config files... [ 10.667833] systemd-journald[140]: File /var/log/journal/9f75034cb9004cb7be7df6d9f4c14bd0/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished prepare mounts and symlinks to config files. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on fcgiwrap Socket. [ OK ] Listening on KNX Daemon (socket). [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Bluetooth service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Authorization Manager... Starting User Login Management...[ 12.529476] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.536291] Bluetooth: BNEP filters: protocol multicast [ 12.541575] Bluetooth: BNEP socket layer initialized [ OK ] Started watch config files. Starting Initialize Wiren Board Device Tree overlays... Starting Avahi mDNS/DNS-SD Stack... Starting WPA supplicant... [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started Bluetooth service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Authorization Manager. [ OK ] Started User Login Management. [ OK ] Started WPA supplicant. [ OK ] Reached target Bluetooth. Starting Modem Manager... Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Modem Manager. [ OK ] Started Network Manager. Starting Network Manager Wait Online... Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ 14.634763] dwmac-sun8i 1c50000.ethernet eth1: PHY [stmmac-1:00] driver [ICPlus IP101A/G] (irq=POLL) [ 14.648338] dwmac-sun8i 1c50000.ethernet eth1: No Safety Features support found [ 14.655877] dwmac-sun8i 1c50000.ethernet eth1: No MAC Management Counters available [ 14.663682] dwmac-sun8i 1c50000.ethernet eth1: PTP not supported by HW [ 14.675608] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 14.689390] dwmac-sun8i 1c50000.ethernet eth1: configuring for phy/mii link mode [ 14.697922] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.480662] start_addr=(0x0), end_addr=(0x20000), buffer_size=(0x20000), smp_number_max=(16384) [ 20.462376] 1c29c00.serial: ttyS7 at MMIO 0x1c29c00 (irq = 131, base_baud = 1500000) is a Allwinner sun4i [ 20.623758] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 132, base_baud = 1500000) is a Allwinner sun4i [ 21.013681] ntc-thermistor wbmz4-battery-temp: Thermistor type: ncp15xh103 successfully probed. [ 22.120370] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 133, base_baud = 1500000) is a Allwinner sun4i [ OK ] Finished Initialize Wiren Board Device Tree overlays. Starting Raise network interfaces... [ OK ] Started Network connection…rvice for Wiren Board devices. Starting Power on GSM modem... Starting KNXD Configurator for Wiren Board... [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting dnsmasq - A light…DHCP and caching DNS server... Starting Access point and …rver for Wi-Fi and Ethernet... Starting KNX Daemon... Starting Mosquitto MQTT Broker... Starting Network Time Service... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Starting MQTT Driver for ADC... Starting MQTT Driver for GPIO-controlled switches... [ OK ] Started MQTT Driver for serial devices. [ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA. [ OK ] Started zigbee2mqtt. [ OK ] Started KNX Daemon. [ INFO ] Skipped dnsmasq - A lightw…t DHCP and caching DNS server. [ INFO ] Skipped Access point and a…server for Wi-Fi and Ethernet. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Getty on tty1. Starting A high performanc… and a reverse proxy server... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. Starting Compensation of s…e-tree (with opposite sign)... [ OK ] Started OpenBSD Secure Shell server. Stopping KNX Daemon... [ OK ] Stopped KNX Daemon. [ OK ] Finished Compensation of s…ice-tree (with opposite sign). Starting KNX Daemon... [ OK ] Started MQTT Driver for GPIO-controlled switches. [ OK ] Started KNX Daemon. [ OK ] Finished KNXD Configurator for Wiren Board. [ OK ] Started Mosquitto MQTT Broker. Starting Wiren Board Cloud Agent (default)... [ OK ] Started Wiren Board modbus devices manager. [ OK ] Started one-click diagnost… generating archive with data. [ 25.783334] RTW: rtw_set_802_11_connect(wlan0) fw_state=0x00000008 [ OK ] Started Wiren Board configuration editor backend. [ OK ] Started Wiren Board database logger. Starting Wiren Board MQTT to IEC 60870-5-104 gateway... [ OK ] Started Wiren Board MQTT KNX bridge. [ OK ] Started Wiren Board journald to MQTT gateway. [ OK ] Started Wiren Board MQTT to Modbus gateway. [ OK ] Started metrics sender.. [ OK ] Started Virtual MQTT devic…r Network Manager connections. Starting Wiren Board MQTT to OPC UA gateway... [ OK ] Started MQTT Rule engine for Wiren Board. [ OK ] Started Wiren Board firmware update service. [ 27.243243] RTW: start auth [ 27.309296] RTW: auth success, start assoc [ 27.326014] RTW: assoc success [ 27.379137] RTW: recv eapol packet 1/4 [ 27.385260] RTW: send eapol packet 2/4 [ 27.394526] RTW: recv eapol packet 3/4 [ 27.399770] RTW: send eapol packet 4/4 [ 27.409967] RTW: set pairwise key camid:0, addr:00:0c:42:b7:ac:03, kid:0, type:AES [ 27.410994] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 27.448488] RTW: set group key camid:1, addr:00:0c:42:b7:ac:03, kid:1, type:AES [ OK ] Finished Network Manager Wait Online. [ OK ] Reached target Network is Online. Starting LSB: Brings up/down network automatically... [ 29.284221] process '/usr/sbin/netplugd' started with executable stack Debian GNU/Linux 11 wirenboard-A3F7BNGZ ttyS0 wirenboard-A3F7BNGZ login: [ 34.413458] vcc-gmac-phy: disabling [ 34.417492] dc5ldo: disabling [ 34.423468] dldo4: disabling [ 51.760373] Mass Storage Function, version: 2009/09/11 [ 51.765861] LUN: removable file: (no medium) [ 51.811802] using random self ethernet address [ 51.816468] using random host ethernet address [ 51.967269] dbg0: HOST MAC 1a:55:89:a2:69:44 [ 51.972302] dbg0: MAC 1a:55:89:a2:69:43 [ 61.132233] RTW: recv eapol packet - WPA Group Key 1/2 [ 61.138365] RTW: recv eapol packet - WPA Group Key 1/2 [ 61.145014] RTW: recv eapol packet - WPA Group Key 1/2 [ 61.150339] RTW: recv eapol packet - WPA Group Key 1/2 [ 61.158154] RTW: set group key camid:2, addr:00:0c:42:b7:ac:03, kid:2, type:AES [ 61.158301] RTW: send eapol packet - WPA Group Key 2/2 [ 61.173197] RTW: send eapol packet - WPA Group Key 2/2 [ 61.180031] RTW: send eapol packet - WPA Group Key 2/2 [ 61.186976] RTW: send eapol packet - WPA Group Key 2/2 [ 66.813528] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 67.101315] usb 3-1: USB disconnect, device number 2 [ 73.023618] usb 3-1: new high-speed USB device number 3 using ehci-platform [ 73.285753] usbcore: registered new interface driver cdc_ether [ 73.307197] usbcore: registered new interface driver option [ 73.312980] usbserial: USB Serial support registered for GSM modem (1-port) [ 73.318954] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-1c1c000.usb-1, RNDIS device, 32:f4:7e:39:5d:4c [ 73.335316] option 3-1:1.2: GSM modem (1-port) converter detected [ 73.343484] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 73.350868] option 3-1:1.4: GSM modem (1-port) converter detected [ 73.360444] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 73.367928] option 3-1:1.5: GSM modem (1-port) converter detected [ 73.377144] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 73.379837] usbcore: registered new interface driver rndis_host [ 73.384543] option 3-1:1.3: GSM modem (1-port) converter detected [ 73.404534] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 116.473636] usb 3-1: USB disconnect, device number 3 [ 116.479310] rndis_host 3-1:1.0 usb0: unregister 'rndis_host' usb-1c1c000.usb-1, RNDIS device [ 116.534995] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 116.543469] option 3-1:1.2: device disconnected [ 116.563200] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 KAi HI@*$)@Fptandby now [EC] 5V line status: voltage present [EC] Power off and go to standby now