Остановка измерений при добавлении VirtualDevice

Контроллеры Wiren Board Wiren Board 6
1

Добавление Virtual devices посредством правила останавливает все измерения, значения замирают на последних, полученных до добавления скрипта. После удаления скрипта работоспособность восстанавливается.

defineVirtualDevice("virt-val", {
  title: "Virtual values", //

  cells: {
   
    'AI01T' : {
        type : "temperature",
        value : ""
    },

    'AI02T' : {
        type : "temperature",
        value : ""
    },
    
    'AI03T' : {
        type : "temperature",
        value : ""
    },
    
      'AI04T' : {
        type : "temperature",
        value : ""
    },
    
    'AI05T' : {
        type : "temperature",
        value : ""
    },
    
    'AI06T' : {
        type : "temperature",
        value : ""
    },
    
    'AI07P' : {
        type : "value",
        value : ""
    },
    
    'AI08P' : {
        type : "value",
        value : ""
    },
    
    'AI09P' : {
        type : "value",
        value : ""
    },
    
    'AI10G' : {
        type : "value",
        value : ""
    },
    
    'AI11G' : {
        type : "value",
        value : ""
    }

  }
});

image
image1024×768 39 KB

Насколько я понимаю, брокер и сервис wb-rules работают
image
image

2

Проверяю.

3
4

Именно такие кавычки?
Текст скрипта вставляете через веб-интерфейс и на синтаксис не ругается?

5

image
image405×819 16.6 KB

скрин из веб интерфейса, не ругается ни на что

6

Ругаться будет если кнопку "SaveЭ нажать.
Но ошибок - нет, не вижу.
Вот такой скрипт:

defineRule("testswitch1", { //название правила
  whenChanged: "wb-gpio/EXT1_IN14", //при изменении состояния кнопки выключателя
  then: function (newValue, devName, cellName) { //выполняй следующие действия
     log.info("TestLog TestVirt 1")//Это лог. Он попадает в /var/log/messages
     if (newValue > 0 ) { //Только нажатие! НЕ отпускание, когда newValue==0
	       dev["virt-val"]["AI01T"] = 20 ; //установи 20
        }
     } 
});

делает:

Screenshot from 2020-06-17 18-06-23
Screenshot from 2020-06-17 18-06-23449×548 13.6 KB

В лог попадает, остальные правила не останавливаются.

7

Может быть где-то имена пересекаются/одинаковые?

8

Одинаковых имён не должно быть. Удалил скрипт, почистил топики MQTT, опять всё заработало, пытаюсь алгоритм работы сделать в nodered, там организовано преобразование значений из первичных мА во вторичные для каждого из 3х типов датчиков 4…20мА, виртуальные значения в WebUI для экспорта вторичных величин.

image
image842×688 54.5 KB

Вчера вечером, когда скрипт virt-val создал в первый раз, то всё работало. Сегодня после ребута ВБ измерения начали фризиться.
Функции в NodeRed имеют вид
image
image502×508 15.8 KB

9

перепрошивка с флешки с полным сбросом, а также отказ от nodered вроде бы решили проблему

image
image662×521 15 KB

defineVirtualDevice("virtval", {

    title: "Virtual values", //

  

    cells: {

     

      'AI01T' : {

          type : "temperature",

          value : -999

      },
});


defineRule("ai01t", {

    whenChanged: "wb-adc/EXT1_A1",

    then: function() {

        if ((dev["wb-adc"]["EXT1_A1"] <= 0.02 ) && (dev["wb-adc"]["EXT1_A1"] >= 0.004) === true) {

            dev["virtval"]["AI01T"] = dev["wb-adc"]["EXT1_A1"]*6250-25;

        } else {

            dev["virtval"]["AI01T"] = -999;

        }

    }

});
10

Вообще - можно было еще посмотреть нагрузку нс CPU, вполне возможно что просто ресурсов мало было.

11

вопрос снова актуален. время от времени обновление измерений останавливается полностю, помогает только перезагрузка ВБ, при этом дискретные выходы управляются нормально. На ВБ после перепрошивки и конфигурации ничего кроме этого правила не менялось. Прошу помочь, так как такое зависание может в дальнейшем привести к выходу оборудования из строя.

defineVirtualDevice("virtval", {

    title: "Virtual values", //

  

    cells: {

     

      'AI01T' : {

          type : "temperature",

          value : -999

      },

  

      'AI02T' : {

          type : "temperature",

          value : -999

      },

      

      'AI03T' : {

          type : "temperature",

          value : -999

      },

      

      'AI04T' : {

          type : "temperature",

          value : -999

      },

      

      'AI05T' : {

          type : "temperature",

          value : -999

      },

      

      'AI06T' : {

          type : "temperature",

          value : -999

      },

      

      'AI07P' : {

          type : "value",

          value : -999

      },

      

      'AI08P' : {

          type : "value",

          value : -999

      },

      

      'AI09P' : {

          type : "value",

          value : -999

      },

      

      'AI10G' : {

          type : "value",

          value : -999

      },

      

      'AI11G' : {

          type : "value",

          value : -999

      }

  

    }

  });

defineRule("ai01t", {

    whenChanged: "wb-adc/EXT1_A1",

    then: function() {

        if ((dev["wb-adc"]["EXT1_A1"] <= 0.02 ) && (dev["wb-adc"]["EXT1_A1"] >= 0.004) === true) {

            dev["virtval"]["AI01T"] = dev["wb-adc"]["EXT1_A1"]*6250-25;

        } else {

            dev["virtval"]["AI01T"] = -999;

        }

    }

});

defineRule("ai02t", {

    whenChanged: "wb-adc/EXT1_A2",

    then: function() {

        if ((dev["wb-adc"]["EXT1_A2"] <= 0.02) && (dev["wb-adc"]["EXT1_A2"] >= 0.004) === true) {

            dev["virtval"]["AI02T"] = dev["wb-adc"]["EXT1_A2"]*6250-25;

        } else {

            dev["virtval"]["AI02T"] = -999;

        }

    }

});

defineRule("ai03t", {

    whenChanged: "wb-adc/EXT1_A3",

    then: function() {

        if ((dev["wb-adc"]["EXT1_A3"] <= 0.02) && (dev["wb-adc"]["EXT1_A3"] >= 0.004) === true) {

            dev["virtval"]["AI03T"] = dev["wb-adc"]["EXT1_A3"]*6250-25;

        } else {

            dev["virtval"]["AI03T"] = -999;

        }

    }

});

defineRule("ai04t", {

    whenChanged: "wb-adc/EXT1_A4",

    then: function() {

        if ((dev["wb-adc"]["EXT1_A4"] <= 0.02) && (dev["wb-adc"]["EXT1_A4"] >= 0.004) === true) {

            dev["virtval"]["AI04T"] = dev["wb-adc"]["EXT1_A4"]*6250-25;

        } else {

            dev["virtval"]["AI04T"] = -999;

        }

    }

});

defineRule("ai05t", {

    whenChanged: "wb-adc/EXT1_A5",

    then: function() {

        if ((dev["wb-adc"]["EXT1_A5"] <= 0.02) && (dev["wb-adc"]["EXT1_A5"] >= 0.004) === true) {

            dev["virtval"]["AI05T"] = dev["wb-adc"]["EXT1_A5"]*6250-25;

        } else {

            dev["virtval"]["AI05T"] = -999;

        }

    }

});

defineRule("ai06t", {

    whenChanged: "wb-adc/EXT1_A6",

    then: function() {

        if ((dev["wb-adc"]["EXT1_A6"] <= 0.02) && (dev["wb-adc"]["EXT1_A6"] >= 0.004) === true) {

            dev["virtval"]["AI06T"] = dev["wb-adc"]["EXT1_A6"]*6250-25;

        } else {

            dev["virtval"]["AI06T"] = -999;

        }

    }

});

defineRule("ai07p", {

    whenChanged: "wb-adc/EXT1_A7",

    then: function() {

        if ((dev["wb-adc"]["EXT1_A7"] <= 0.02) && (dev["wb-adc"]["EXT1_A7"] >= 0.004) === true) {

            dev["virtval"]["AI07P"] = dev["wb-adc"]["EXT1_A7"]*156.25-1.625;

        } else {

            dev["virtval"]["AI07P"] = -999;

        }

    }

});

defineRule("ai08p", {

    whenChanged: "wb-adc/EXT1_A8",

    then: function() {

        if ((dev["wb-adc"]["EXT1_A8"] <= 0.02) && (dev["wb-adc"]["EXT1_A8"] >= 0.004) === true) {

            dev["virtval"]["AI08P"] = dev["wb-adc"]["EXT1_A8"]*156.25-1.625;

        } else {

            dev["virtval"]["AI08P"] = -999;

        }

    }

});

defineRule("ai09p", {

    whenChanged: "wb-adc/EXT1_A9",

    then: function() {

        if ((dev["wb-adc"]["EXT1_A9"] <= 0.02) && (dev["wb-adc"]["EXT1_A9"] >= 0.004) === true) {

            dev["virtval"]["AI09P"] = dev["wb-adc"]["EXT1_A9"]*156.25-1.625;

        } else {

            dev["virtval"]["AI09P"] = -999;

        }

    }

});

defineRule("ai10g", {

    whenChanged: "wb-adc/EXT1_A10",

    then: function() {

        if ((dev["wb-adc"]["EXT1_A10"] <= 0.02) && (dev["wb-adc"]["EXT1_A10"] >= 0.004) === true) {

            dev["virtval"]["AI10G"] = dev["wb-adc"]["EXT1_A10"]*593.75-1.875;

        } else {

            dev["virtval"]["AI10G"] = -999;

        }

    }

});

defineRule("ai11g", {

    whenChanged: "wb-adc/EXT1_A11",

    then: function() {

        if ((dev["wb-adc"]["EXT1_A11"] <= 0.02) && (dev["wb-adc"]["EXT1_A11"] >= 0.004) === true) {

            dev["virtval"]["AI11G"] = dev["wb-adc"]["EXT1_A11"]*593.75-1.875;

        } else {

            dev["virtval"]["AI11G"] = -999;

        }

    }

});
12

Выложите /var/log/messages
С моментом зависания.
И
проверьте свободное место

df -h

Да, версия wb-rules какая сейчас?

dpkg -s wb-rules
13

image
image

14

В самом скрипте ничего криминального не видно. Можете выложить /var/log/messages целиком?

15

Целиком не отправляется, выкладываю за последний день по частям

Jul  3 04:25:31 wirenboard-AZAF2JDX daemon.err ntpdate[439]: Can't find host 0.debian.pool.ntp.org: Name or service not known (-2)
Jul  3 04:25:31 wirenboard-AZAF2JDX daemon.err ntpdate[439]: Can't find host 1.debian.pool.ntp.org: Name or service not known (-2)
Jul  3 04:25:31 wirenboard-AZAF2JDX daemon.err ntpdate[439]: Can't find host 2.debian.pool.ntp.org: Name or service not known (-2)
Jul  3 04:25:31 wirenboard-AZAF2JDX daemon.err ntpdate[439]: Can't find host 3.debian.pool.ntp.org: Name or service not known (-2)
Jul  3 04:25:31 wirenboard-AZAF2JDX daemon.err ntpdate[439]: no servers can be used, exiting
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: klogd started: BusyBox v1.22.1 (Debian 1:1.22.0-19+b3)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    0.000000] Linux version 4.9.22-wb6 (root@wbdevenv) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #2 SMP Wed Jun 10 11:07:45 UTC 2020
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] CPU: div instructions available: patching division code
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] OF: fdt:Machine model: Wiren Board rev. 6.6.0 (i.MX6UL/ULL)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] cma: Reserved 16 MiB at 0x9f000000
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] Memory policy: Data cache writealloc
Jul  3 04:25:32 wirenboard-AZAF2JDX user.debug kernel: [    0.000000] On node 0 totalpages: 131072
Jul  3 04:25:32 wirenboard-AZAF2JDX user.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat c0b4d840, node_mem_map deab3000
Jul  3 04:25:32 wirenboard-AZAF2JDX user.debug kernel: [    0.000000]   Normal zone: 1152 pages used for memmap
Jul  3 04:25:32 wirenboard-AZAF2JDX user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Jul  3 04:25:32 wirenboard-AZAF2JDX user.debug kernel: [    0.000000]   Normal zone: 131072 pages, LIFO batch:31
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] percpu: Embedded 14 pages/cpu @defc7000 s25996 r8192 d23156 u57344
Jul  3 04:25:32 wirenboard-AZAF2JDX user.debug kernel: [    0.000000] pcpu-alloc: s25996 r8192 d23156 u57344 alloc=14*4096
Jul  3 04:25:32 wirenboard-AZAF2JDX user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129920
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait ro
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] Memory: 491716K/524288K available (6144K kernel code, 312K rwdata, 2276K rodata, 1024K init, 342K bss, 16188K reserved, 16384K cma-reserved)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    0.000000] Virtual kernel memory layout:
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    0.000000]       .text : 0xc0008000 - 0xc0700000   (7136 kB)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    0.000000]       .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    0.000000]       .data : 0xc0b00000 - 0xc0b4e100   ( 313 kB)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    0.000000]        .bss : 0xc0b50000 - 0xc0ba5aec   ( 343 kB)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] Hierarchical RCU implementation.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] 	Build-time adjustment of leaf fanout to 32.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] NR_IRQS:16 nr_irqs:16 16
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000000] Switching to timer-based delay loop, resolution 41ns
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.000052] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.002558] Console: colour dummy device 80x30
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.002596] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.002627] pid_max: default: 32768 minimum: 301
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.002893] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.002918] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.004398] CPU: Testing write buffer coherency: ok
Jul  3 04:25:32 wirenboard-AZAF2JDX user.err kernel: [    0.004969] /cpus/cpu@0 missing clock-frequency property
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.005009] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.005065] Setting up static identity map for 0x80100000 - 0x80100070
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.007666] Brought up 1 CPUs
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.007699] SMP: Total of 1 processors activated (48.00 BogoMIPS).
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.007715] CPU: All CPU(s) started in SVC mode.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.009156] devtmpfs: initialized
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.036134] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.036922] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.036971] futex hash table entries: 256 (order: 2, 16384 bytes)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.038361] pinctrl core: initialized pinctrl subsystem
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.040913] NET: Registered protocol family 16
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.042835] DMA: preallocated 256 KiB pool for atomic coherent allocations
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.045663] cpuidle: using governor menu
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.080336] No ATAGs?
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.080391] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.080414] hw-breakpoint: maximum watchpoint size is 8 bytes.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.082795] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.128955] mxs-dma 1804000.dma-apbh: initialized
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    0.133780] SCSI subsystem initialized
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.134384] usbcore: registered new interface driver usbfs
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.134547] usbcore: registered new interface driver hub
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.134807] usbcore: registered new device driver usb
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.136510] i2c-gpio i2c_rtc: using pins 48 (SDA) and 49 (SCL)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.137448] i2c-gpio i2c_eeprom1: using pins 76 (SDA) and 67 (SCL)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.138340] i2c-gpio i2c_eeprom2: using pins 70 (SDA) and 71 (SCL)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.139719] i2c i2c-1: IMX I2C adapter registered
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.139763] i2c i2c-1: can't use DMA, using PIO instead.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.140119] Linux video capture interface: v2.00
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.140272] pps_core: LinuxPPS API ver. 1 registered
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.140292] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.140348] PTP clock support registered
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.141058] Advanced Linux Sound Architecture Driver Initialized.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.143742] clocksource: Switched to clocksource mxc_timer1
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.169434] NET: Registered protocol family 2
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.170696] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.170820] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.170978] TCP: Hash tables configured (established 4096 bind 4096)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.171092] UDP hash table entries: 256 (order: 1, 8192 bytes)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.171149] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.171464] NET: Registered protocol family 1
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.172374] RPC: Registered named UNIX socket transport module.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.172406] RPC: Registered udp transport module.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.172423] RPC: Registered tcp transport module.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.172438] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.177383] workingset: timestamp_bits=14 max_order=17 bucket_order=3
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    0.197084] NFS: Registering the id_resolver key type
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    0.197161] Key type id_resolver registered
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    0.197177] Key type id_legacy registered
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.208030] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.208065] io scheduler noop registered (default)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.208084] io scheduler deadline registered
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.208167] io scheduler cfq registered
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [    0.214865] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.214907] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.224462] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 18, base_baud = 5000000) is a IMX
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.803409] console [ttymxc0] enabled
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.809044] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 55, base_baud = 5000000) is a IMX
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.819385] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 56, base_baud = 5000000) is a IMX
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.862746] imx_rngc 2284000.rngb: Freescale RNGC registered.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.868883] [drm] Initialized
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.908647] brd: module loaded
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.928441] loop: module loaded
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.936695] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.948186] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.959070] libphy: Fixed MDIO Bus: probed
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [    0.965779] 20b4000.ethernet supply phy not found, using dummy regulator
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    0.973926] pps pps0: new PPS source ptp0
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.007834] libphy: fec_enet_mii_bus: probed
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.013554] fec 20b4000.ethernet eth0: registered PHC device 0
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [    1.133842] 2188000.ethernet supply phy not found, using dummy regulator
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.254895] pps pps1: new PPS source ptp1
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.260191] libphy: fec_enet_mii_bus: probed
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.268300] fec 2188000.ethernet eth1: registered PHC device 1
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.274878] PPP generic driver version 2.4.2
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.279701] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.286391] ehci-mxc: Freescale On-Chip EHCI Host driver
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.292236] usbcore: registered new interface driver usb-storage
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.298882] usbcore: registered new interface driver usbserial
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.305047] usbcore: registered new interface driver usbserial_generic
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.311707] usbserial: USB Serial support registered for generic
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.318451] mousedev: PS/2 mouse device common for all mice
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.382461] rtc-pcf8563 4-0051: rtc core: registered rtc-pcf8563 as rtc0
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.398745] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.407874] i2c /dev entries driver
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.421364] lm75 4-0048: hwmon0: sensor 'lm75b'
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.542496] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.550782] sdhci: Secure Digital Host Controller Interface driver
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.557115] sdhci: Copyright(c) Pierre Ossman
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.561502] sdhci-pltfm: SDHCI platform and OF driver helper
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.633822] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.653396] ledtrig-cpu: registered to indicate activity on CPUs
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.678144] usbcore: registered new interface driver usbhid
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.685914] usbhid: USB HID core driver
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.711832] NET: Registered protocol family 10
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.719155] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.727048] NET: Registered protocol family 17
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    1.731714] Key type dns_resolver registered
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    1.741130] Registering SWP/SWPB emulation handler
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.748159] registered taskstats version 1
Jul  3 04:25:32 wirenboard-AZAF2JDX user.notice kernel: [    1.770339] random: fast init done
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.778697] mmc0: new DDR MMC card at address 0001
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.785796] imx_thermal 2000000.aips-bus:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.796783] mmcblk0: mmc0:0001 Q2J54A 3.59 GiB 
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.801783] mmcblk0boot0: mmc0:0001 Q2J54A partition 1 16.0 MiB
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.820642] rtc-pcf8563 4-0051: setting system clock to 2020-07-03 04:25:18 UTC (1593750318)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.829141] of_cfs_init
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.831954] mmcblk0boot1: mmc0:0001 Q2J54A partition 2 16.0 MiB
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.838475] mmcblk0rpmb: mmc0:0001 Q2J54A partition 3 512 KiB
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.847489] of_cfs_init: OK
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.855941] vdd3p0: disabling
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.859054]  mmcblk0: p1 p2 p3 p4 < p5 p6 >
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.863629] vref-3v3: disabling
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.869238] usb1_vbus: disabling
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.872498] usb2_vbus: disabling
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.875841] ALSA device list:
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.878821]   No soundcards found.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.err kernel: [    1.885190] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
Jul  3 04:25:32 wirenboard-AZAF2JDX user.err kernel: [    1.894045] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.903860] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    1.911194] EXT4-fs (mmcblk0p3): write access will be enabled during recovery
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    2.232824] EXT4-fs (mmcblk0p3): recovery complete
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    2.242546] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    2.250953] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    2.259513] devtmpfs: mounted
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    2.268072] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    2.530444] ip_tables: (C) 2000-2006 Netfilter Core Team
Jul  3 04:25:32 wirenboard-AZAF2JDX daemon.info kernel: [    2.567736] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
Jul  3 04:25:32 wirenboard-AZAF2JDX daemon.info kernel: [    2.587836] systemd[1]: Detected architecture arm.
Jul  3 04:25:32 wirenboard-AZAF2JDX daemon.info kernel: [    2.624803] systemd[1]: Set hostname to <wirenboard-AZAF2JDX>.
Jul  3 04:25:32 wirenboard-AZAF2JDX daemon.info kernel: [    3.229488] systemd[1]: Listening on fsck to fsckd communication Socket.
Jul  3 04:25:32 wirenboard-AZAF2JDX daemon.info kernel: [    3.264387] systemd[1]: Listening on udev Kernel Socket.
Jul  3 04:25:32 wirenboard-AZAF2JDX daemon.info kernel: [    3.294470] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Jul  3 04:25:32 wirenboard-AZAF2JDX daemon.info kernel: [    3.334099] systemd[1]: Reached target Remote File Systems.
Jul  3 04:25:32 wirenboard-AZAF2JDX daemon.info kernel: [    3.383010] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Jul  3 04:25:32 wirenboard-AZAF2JDX daemon.info kernel: [    3.424378] systemd[1]: Reached target Paths.
Jul  3 04:25:32 wirenboard-AZAF2JDX daemon.info kernel: [    3.454812] systemd[1]: Listening on udev Control Socket.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    4.505751] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro
Jul  3 04:25:32 wirenboard-AZAF2JDX syslog.info kernel: [    4.937217] systemd-journald[147]: Received request to flush runtime journal from PID 1
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    6.329462] lirc_dev: IR Remote Control driver registered, major 245
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    6.381792] Driver for 1-wire Dallas network protocol.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [    6.397734] lirc_pwm: module is from the staging directory, the quality is unknown, you have been warned.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    6.488478] lirc_pwm lirc-rfm69: GPIO receiver on pin 77
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    6.551324] lirc_pwm lirc-rfm69: lirc_dev: driver lirc-rfm69 registered at minor = 0
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    6.626623] lirc_pwm lirc-rfm69: probed
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    6.844700] fec 20b4000.ethernet rename2: renamed from eth0
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    7.184946] fec 2188000.ethernet eth0: renamed from eth1
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    7.205894] fec 20b4000.ethernet eth1: renamed from rename2
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    7.222077] ci_hdrc ci_hdrc.0: EHCI Host Controller
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    7.251281] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    7.353913] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    7.428423] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    7.435400] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    7.442637] usb usb1: Product: EHCI Host Controller
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    7.447578] usb usb1: Manufacturer: Linux 4.9.22-wb6 ehci_hcd
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    7.453334] usb usb1: SerialNumber: ci_hdrc.0
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    7.751958] hub 1-0:1.0: USB hub found
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    7.800743] hub 1-0:1.0: 1 port detected
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    7.884401] ci_hdrc ci_hdrc.1: EHCI Host Controller
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    7.889358] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    8.063906] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    8.079352] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    8.086342] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    8.093577] usb usb2: Product: EHCI Host Controller
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    8.098506] usb usb2: Manufacturer: Linux 4.9.22-wb6 ehci_hcd
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    8.104285] usb usb2: SerialNumber: ci_hdrc.1
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    8.364319] hub 2-0:1.0: USB hub found
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    8.414045] hub 2-0:1.0: 1 port detected
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    8.803934] usb 2-1: new high-speed USB device number 2 using ci_hdrc
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    8.919583] Adding 262140k swap on /dev/mmcblk0p5.  Priority:-1 extents:1 across:262140k SS
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.004582] usb 2-1: New USB device found, idVendor=0424, idProduct=2514
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.011338] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.034428] hub 2-1:1.0: USB hub found
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.039965] hub 2-1:1.0: 4 ports detected
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.290252] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.373898] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.535556] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.542489] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.549981] usb 2-1.1: Product: 802.11n WLAN Adapter
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.554996] usb 2-1.1: Manufacturer: Realtek
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.559276] usb 2-1.1: SerialNumber: 00e04c000001
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.710462] Bluetooth: Core ver 2.22
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.798815] NET: Registered protocol family 31
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.803285] Bluetooth: HCI device and connection manager initialized
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.829948] Bluetooth: HCI socket layer initialized
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.838470] Bluetooth: L2CAP socket layer initialized
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.852813] Bluetooth: SCO socket layer initialized
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.937770] usbcore: registered new interface driver btusb
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.949477] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.958278] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [    9.972798] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
Jul  3 04:25:32 wirenboard-AZAF2JDX user.err kernel: [    9.983051] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [    9.989629] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [   10.000465] Bluetooth: hci0: rom_version status=0 version=1
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [   10.006370] Bluetooth: cfg_sz 0, total size 22496
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [   10.421095] 8723bu: module is from the staging directory, the quality is unknown, you have been warned.
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [   10.462887] RTL871X: module init start
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [   10.466800] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [   10.473855] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [   10.716093] RTL871X: rtw_ndev_init(wlan0)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [   10.732075] RTL871X: rtw_ndev_init(wlan1)
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [   10.749353] usbcore: registered new interface driver rtl8723bu
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [   10.755346] RTL871X: module init ret=0
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [   12.032074] cgroup: new mount options do not match the existing superblock, will be ignored
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [   12.357027] RTL871X: RTW_ADAPTIVITY_EN_
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [   12.360747] AUTO, chplan:0x20, Regulation:3,3
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [   12.365219] RTL871X: RTW_ADAPTIVITY_MODE_
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [   12.369091] NORMAL
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [   13.303098] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [   13.308571] Bluetooth: BNEP filters: protocol multicast
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [   13.371989] Bluetooth: BNEP socket layer initialized
Jul  3 04:25:32 wirenboard-AZAF2JDX user.info kernel: [   13.769443] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jul  3 04:25:32 wirenboard-AZAF2JDX user.warn kernel: [   15.845554] RTL871X: nolinked power save enter
16 
Jul  3 04:25:34 wirenboard-AZAF2JDX daemon.info wb-mqtt-confed[634]: INFO: MQTT connection established
Jul  3 04:25:36 wirenboard-AZAF2JDX user.notice wb-mqtt-db[640]: 2020-07-03 04:25:36.923 NOTICE: DB logger started, go to main loop
Jul  3 04:25:37 wirenboard-AZAF2JDX user.notice kernel: [   21.058234] random: crng init done
Jul  3 04:25:42 wirenboard-AZAF2JDX user.info kernel: [   25.952445] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 242, base_baud = 5000000) is a IMX
Jul  3 04:25:48 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: driver is created
Jul  3 04:25:48 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: [wbgo_mqtt] rules-wirenboard-AZAF2JDX-2190: MQTT connection established
Jul  3 04:25:48 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: driver loop is started
Jul  3 04:25:48 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: wait for driver to become ready
Jul  3 04:25:49 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: driver is ready
Jul  3 04:25:49 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: [rule info] using file /var/lib/wirenboard/wbrules-persistent.db for persistent DB
Jul  3 04:25:50 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: [wbgo_mqtt] wb-rules-engine-wirenboard-AZAF2JDX-2190: MQTT connection established
Jul  3 04:25:51 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: [engine] Starting main loop
Jul  3 04:25:51 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: the engine is ready
Jul  3 04:25:51 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: [engine] Starting sync loop
Jul  3 04:25:51 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: /usr/share/wb-rules-system/rules/buzzer.js is NOT under source root /etc/wb-rules
Jul  3 04:25:51 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: /usr/share/wb-rules-system/rules/hwmon.js is NOT under source root /etc/wb-rules
Jul  3 04:25:52 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: /usr/share/wb-rules-system/rules/network.js is NOT under source root /etc/wb-rules
Jul  3 04:25:52 wirenboard-AZAF2JDX auth.info sshd[2593]: Server listening on 0.0.0.0 port 22.
Jul  3 04:25:52 wirenboard-AZAF2JDX auth.info sshd[2593]: Server listening on :: port 22.
Jul  3 04:25:52 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: /usr/share/wb-rules-system/rules/power_status.js is NOT under source root /etc/wb-rules
Jul  3 04:25:53 wirenboard-AZAF2JDX daemon.notice ntpd[2666]: ntpd 4.2.8p10@1.3728-o Sat Feb 24 11:31:31 UTC 2018 (1): Starting
Jul  3 04:25:53 wirenboard-AZAF2JDX daemon.info ntpd[2666]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 101:103
Jul  3 04:25:53 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: /usr/share/wb-rules-system/rules/system.js is NOT under source root /etc/wb-rules
Jul  3 04:25:53 wirenboard-AZAF2JDX user.info kernel: [   36.924179] SMSC LAN8710/LAN8720 2188000.ethernet:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
Jul  3 04:25:53 wirenboard-AZAF2JDX user.info kernel: [   37.098864] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jul  3 04:25:53 wirenboard-AZAF2JDX daemon.info ntpd[2721]: proto: precision = 2.083 usec (-19)
Jul  3 04:25:53 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Listen and drop on 0 v6wildcard [::]:123
Jul  3 04:25:53 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Jul  3 04:25:54 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: /usr/share/wb-rules-system/rules/wb-mqtt-dac.js is NOT under source root /etc/wb-rules
Jul  3 04:25:55 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: /usr/share/wb-rules-system/rules/wbmz2-battery.js is NOT under source root /etc/wb-rules
Jul  3 04:25:55 wirenboard-AZAF2JDX user.info kernel: [   39.204877] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
Jul  3 04:25:56 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: [rule info] add your rules to /etc/wb-rules/
Jul  3 04:25:57 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: /usr/share/wb-rules/load_alarms.js is NOT under source root /etc/wb-rules
Jul  3 04:25:57 wirenboard-AZAF2JDX daemon.info wb-rules[2190]: INFO: all rule files are loaded
Jul  3 04:25:57 wirenboard-AZAF2JDX user.warn kernel: [   41.085319] RTL871X: RTW_ADAPTIVITY_EN_
Jul  3 04:25:57 wirenboard-AZAF2JDX user.warn kernel: [   41.089039] AUTO, chplan:0x20, Regulation:3,3
Jul  3 04:25:57 wirenboard-AZAF2JDX user.warn kernel: [   41.093454] RTL871X: RTW_ADAPTIVITY_MODE_
Jul  3 04:25:57 wirenboard-AZAF2JDX user.warn kernel: [   41.097418] NORMAL
Jul  3 04:25:46 wirenboard-AZAF2JDX user.notice serial: FATAL: Error parsing config file: no devices defined in config. Nothing to do
Jul  3 04:26:00 wirenboard-AZAF2JDX user.warn kernel: [   43.394966] RTL871X: nolinked power save leave
Jul  3 04:26:00 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Listen normally on 2 lo 127.0.0.1:123
Jul  3 04:26:00 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Listen normally on 3 lo [::1]:123
Jul  3 04:26:00 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Listening on routing socket on fd #20 for interface updates
Jul  3 04:26:00 wirenboard-AZAF2JDX user.info kernel: [   43.754629] Micrel KSZ8081 or KSZ8091 2188000.ethernet:03: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet:03, irq=-1)
Jul  3 04:26:00 wirenboard-AZAF2JDX user.info kernel: [   43.823091] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Jul  3 04:26:00 wirenboard-AZAF2JDX user.info kernel: [   43.863486] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jul  3 04:26:00 wirenboard-AZAF2JDX daemon.info dnsmasq[3170]: started, version 2.76 cachesize 150
Jul  3 04:26:00 wirenboard-AZAF2JDX daemon.info dnsmasq[3170]: compile time options: IPv6 GNU-getopt DBus i18n IDN DHCP DHCPv6 no-Lua TFTP conntrack ipset auth DNSSEC loop-detect inotify
Jul  3 04:26:00 wirenboard-AZAF2JDX daemon.info dnsmasq-dhcp[3170]: DHCP, IP range 192.168.42.50 -- 192.168.42.150, lease time 12h
Jul  3 04:26:01 wirenboard-AZAF2JDX user.warn kernel: [   44.330401] RTL871X: assoc success
Jul  3 04:26:01 wirenboard-AZAF2JDX user.info kernel: [   44.334102] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jul  3 04:26:01 wirenboard-AZAF2JDX daemon.info dnsmasq[3170]: reading /etc/resolv.conf
Jul  3 04:26:01 wirenboard-AZAF2JDX daemon.info dnsmasq[3170]: using nameserver 192.168.3.1#53
Jul  3 04:26:01 wirenboard-AZAF2JDX daemon.info dnsmasq[3170]: read /etc/hosts - 6 addresses
Jul  3 04:26:01 wirenboard-AZAF2JDX daemon.err ntpd[2721]: error resolving pool 0.debian.pool.ntp.org: Name or service not known (-2)
Jul  3 04:26:01 wirenboard-AZAF2JDX daemon.info dhclient[3219]: Internet Systems Consortium DHCP Client 4.3.5
Jul  3 04:26:01 wirenboard-AZAF2JDX daemon.info dhclient[3219]: Copyright 2004-2016 Internet Systems Consortium.
Jul  3 04:26:01 wirenboard-AZAF2JDX daemon.info dhclient[3219]: All rights reserved.
Jul  3 04:26:01 wirenboard-AZAF2JDX daemon.info dhclient[3219]: For info, please visit https://www.isc.org/software/dhcp/
Jul  3 04:26:01 wirenboard-AZAF2JDX daemon.info dhclient[3219]: 
Jul  3 04:26:01 wirenboard-AZAF2JDX daemon.err dhclient[3219]: parse_option_param: Bad format d
Jul  3 04:26:01 wirenboard-AZAF2JDX daemon.info dhclient[3219]: Listening on LPF/eth0/54:10:ec:34:bf:3d
Jul  3 04:26:01 wirenboard-AZAF2JDX daemon.info dhclient[3219]: Sending on   LPF/eth0/54:10:ec:34:bf:3d
Jul  3 04:26:01 wirenboard-AZAF2JDX daemon.info dhclient[3219]: Sending on   Socket/fallback
Jul  3 04:26:01 wirenboard-AZAF2JDX daemon.info dhclient[3219]: DHCPREQUEST of 192.168.3.103 on eth0 to 255.255.255.255 port 67
Jul  3 04:26:01 wirenboard-AZAF2JDX daemon.info dhclient[3219]: DHCPACK of 192.168.3.103 from 192.168.3.1
Jul  3 04:26:01 wirenboard-AZAF2JDX authpriv.info CRON[3234]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:26:01 wirenboard-AZAF2JDX cron.info CRON[3258]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:26:02 wirenboard-AZAF2JDX daemon.info dnsmasq[3170]: reading /etc/resolv.conf
Jul  3 04:26:02 wirenboard-AZAF2JDX daemon.info dnsmasq[3170]: using nameserver 192.168.3.1#53
Jul  3 04:26:02 wirenboard-AZAF2JDX daemon.info dhclient[3219]: bound to 192.168.3.103 -- renewal in 42510 seconds.
Jul  3 04:26:02 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 185.22.60.71
Jul  3 04:26:02 wirenboard-AZAF2JDX daemon.err ntpdate[3302]: the NTP socket is in use, exiting
Jul  3 04:26:03 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 78.36.18.184
Jul  3 04:26:03 wirenboard-AZAF2JDX daemon.info netplugd[3358]: /etc/netplug/netplug eth0 in -> pid 3358
Jul  3 04:26:03 wirenboard-AZAF2JDX daemon.info netplugd[3357]: eth0: state INNING pid 3358 exited status 0
Jul  3 04:26:03 wirenboard-AZAF2JDX auth.info sshd[2593]: Received SIGHUP; restarting.
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.notice watchdog[3379]: starting daemon (5.15):
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: int=1s realtime=yes sync=no load=0,0,0 soft=no
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: memory: minimum pages = 256 free, 0 allocatable (4096 byte pages)
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: ping: no machine to check
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: file: no file to check
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: pidfile: /var/run/syslogd.pid
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: pidfile: /var/run/sshd.pid
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: pidfile: /var/run/mosquitto.pid
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: pidfile: /var/run/nginx.pid
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: interface: no interface to check
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: temperature: no sensors to check
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: no test binary files
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: no repair binary files
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: error retry time-out = 30 seconds
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: repair attempts = 1
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: alive=/dev/watchdog1 heartbeat=[none] to=[none] no_act=no force=no
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: watchdog now set to 60 seconds
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info watchdog[3379]: hardware watchdog identity: GPIO Watchdog
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.err watchdog[3379]: cannot open /var/run/sshd.pid (errno = 2 = 'No such file or directory')
Jul  3 04:26:04 wirenboard-AZAF2JDX auth.info sshd[2593]: Server listening on 0.0.0.0 port 22.
Jul  3 04:26:04 wirenboard-AZAF2JDX auth.info sshd[2593]: Server listening on :: port 22.
Jul  3 04:26:04 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 79.120.30.43
Jul  3 04:26:06 wirenboard-AZAF2JDX authpriv.info CRON[3234]: pam_unix(cron:session): session closed for user root
Jul  3 04:26:07 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Listen normally on 4 eth0 192.168.3.103:123
Jul  3 04:26:07 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Listen normally on 5 wlan0 192.168.42.1:123
Jul  3 04:26:07 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Listen normally on 6 eth0 [fdbc:3d85:d84b:9d00:5610:ecff:fe34:bf3d]:123
Jul  3 04:26:07 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Listen normally on 7 eth0 [fe80::5610:ecff:fe34:bf3d%3]:123
Jul  3 04:26:07 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Listen normally on 8 wlan0 [fe80::ae5d:5cff:fedb:91da%5]:123
Jul  3 04:27:01 wirenboard-AZAF2JDX authpriv.info CRON[3448]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:27:01 wirenboard-AZAF2JDX cron.info CRON[3452]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:27:05 wirenboard-AZAF2JDX authpriv.info CRON[3448]: pam_unix(cron:session): session closed for user root
Jul  3 04:27:06 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 91.209.94.10
Jul  3 04:27:07 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 85.21.78.91
Jul  3 04:27:08 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 78.36.18.184
Jul  3 04:27:08 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 195.3.254.2
Jul  3 04:27:09 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 85.21.78.8
Jul  3 04:27:09 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 79.120.30.43
Jul  3 04:27:10 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 193.109.84.119
Jul  3 04:27:10 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 91.207.136.50
Jul  3 04:27:10 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 213.232.229.170
Jul  3 04:27:10 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 91.207.136.55
Jul  3 04:27:11 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 194.190.168.1
Jul  3 04:27:11 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 81.88.210.197
Jul  3 04:27:11 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 185.209.85.222
Jul  3 04:27:12 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 193.192.36.3
Jul  3 04:27:12 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 91.235.144.128
Jul  3 04:27:13 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 2a00:ab00:1108:211:213:232:229:170
Jul  3 04:27:13 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 195.161.115.4
Jul  3 04:27:14 wirenboard-AZAF2JDX daemon.info ntpd[2721]: Soliciting pool server 80.240.216.155
Jul  3 04:27:15 wirenboard-AZAF2JDX daemon.info ntpd[2721]: receive: Unexpected origin timestamp 0xe2a93223.654a58e3 does not match aorg 0000000000.00000000 from server@195.3.254.2 xmt 0xe2a93223.d170dd1d
Jul  3 04:27:15 wirenboard-AZAF2JDX daemon.info ntpd[2721]: receive: Unexpected origin timestamp 0xe2a93223.65219233 does not match aorg 0000000000.00000000 from server@91.207.136.50 xmt 0xe2a93223.d10682a0
Jul  3 04:27:15 wirenboard-AZAF2JDX daemon.info ntpd[2721]: receive: Unexpected origin timestamp 0xe2a93223.655113c5 does not match aorg 0000000000.00000000 from server@78.36.18.184 xmt 0xe2a93223.d3681add
Jul  3 04:27:36 wirenboard-AZAF2JDX user.notice wb-mqtt-db[640]: 2020-07-03 04:27:36.606 NOTICE: Bulk processing took 188ms
Jul  3 04:28:02 wirenboard-AZAF2JDX authpriv.info CRON[3957]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:28:02 wirenboard-AZAF2JDX cron.info CRON[3961]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:28:06 wirenboard-AZAF2JDX authpriv.info CRON[3957]: pam_unix(cron:session): session closed for user root
Jul  3 04:29:01 wirenboard-AZAF2JDX authpriv.info CRON[4036]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:29:01 wirenboard-AZAF2JDX cron.info CRON[4040]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:29:05 wirenboard-AZAF2JDX authpriv.info CRON[4036]: pam_unix(cron:session): session closed for user root
Jul  3 04:29:36 wirenboard-AZAF2JDX user.notice wb-mqtt-db[640]: 2020-07-03 04:29:36.557 NOTICE: Bulk processing took 140ms
Jul  3 04:30:01 wirenboard-AZAF2JDX authpriv.info CRON[4111]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:30:01 wirenboard-AZAF2JDX cron.info CRON[4117]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:30:01 wirenboard-AZAF2JDX authpriv.info CRON[4112]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:30:01 wirenboard-AZAF2JDX cron.info CRON[4120]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_wbrules.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:30:03 wirenboard-AZAF2JDX authpriv.info CRON[4112]: pam_unix(cron:session): session closed for user root
Jul  3 04:30:06 wirenboard-AZAF2JDX authpriv.info CRON[4111]: pam_unix(cron:session): session closed for user root
Jul  3 04:31:01 wirenboard-AZAF2JDX authpriv.info CRON[4223]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:31:01 wirenboard-AZAF2JDX cron.info CRON[4227]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:31:05 wirenboard-AZAF2JDX authpriv.info CRON[4223]: pam_unix(cron:session): session closed for user root
Jul  3 04:31:36 wirenboard-AZAF2JDX user.notice wb-mqtt-db[640]: 2020-07-03 04:31:36.544 NOTICE: Bulk processing took 127ms
Jul  3 04:32:01 wirenboard-AZAF2JDX authpriv.info CRON[4306]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:32:01 wirenboard-AZAF2JDX cron.info CRON[4310]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:32:05 wirenboard-AZAF2JDX authpriv.info CRON[4306]: pam_unix(cron:session): session closed for user root
Jul  3 04:33:01 wirenboard-AZAF2JDX authpriv.info CRON[4395]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:33:01 wirenboard-AZAF2JDX cron.info CRON[4399]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:33:02 wirenboard-AZAF2JDX auth.info sshd[4409]: rexec line 18: Deprecated option KeyRegenerationInterval
Jul  3 04:33:02 wirenboard-AZAF2JDX auth.info sshd[4409]: rexec line 19: Deprecated option ServerKeyBits
Jul  3 04:33:02 wirenboard-AZAF2JDX auth.info sshd[4409]: rexec line 30: Deprecated option RSAAuthentication
Jul  3 04:33:02 wirenboard-AZAF2JDX auth.info sshd[4409]: rexec line 37: Deprecated option RhostsRSAAuthentication
Jul  3 04:33:03 wirenboard-AZAF2JDX auth.info sshd[4409]: reprocess config line 30: Deprecated option RSAAuthentication
Jul  3 04:33:03 wirenboard-AZAF2JDX auth.info sshd[4409]: reprocess config line 37: Deprecated option RhostsRSAAuthentication
Jul  3 04:33:03 wirenboard-AZAF2JDX auth.info sshd[4409]: Accepted password for root from 192.168.3.102 port 50048 ssh2
Jul  3 04:33:03 wirenboard-AZAF2JDX authpriv.info sshd[4409]: pam_unix(sshd:session): session opened for user root by (uid=0)
Jul  3 04:33:03 wirenboard-AZAF2JDX authpriv.info systemd: pam_unix(systemd-user:session): session opened for user root by (uid=0)
Jul  3 04:33:06 wirenboard-AZAF2JDX authpriv.info CRON[4395]: pam_unix(cron:session): session closed for user root
Jul  3 04:33:36 wirenboard-AZAF2JDX user.notice wb-mqtt-db[640]: 2020-07-03 04:33:36.525 NOTICE: Bulk processing took 108ms
Jul  3 04:34:01 wirenboard-AZAF2JDX authpriv.info CRON[4512]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:34:01 wirenboard-AZAF2JDX cron.info CRON[4516]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:34:05 wirenboard-AZAF2JDX authpriv.info CRON[4512]: pam_unix(cron:session): session closed for user root
Jul  3 04:35:01 wirenboard-AZAF2JDX authpriv.info CRON[4587]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:35:01 wirenboard-AZAF2JDX authpriv.info CRON[4588]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:35:01 wirenboard-AZAF2JDX cron.info CRON[4595]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:35:01 wirenboard-AZAF2JDX cron.info CRON[4599]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_wbrules.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:35:02 wirenboard-AZAF2JDX authpriv.info CRON[4588]: pam_unix(cron:session): session closed for user root
Jul  3 04:35:05 wirenboard-AZAF2JDX authpriv.info CRON[4587]: pam_unix(cron:session): session closed for user root
Jul  3 04:35:36 wirenboard-AZAF2JDX user.notice wb-mqtt-db[640]: 2020-07-03 04:35:36.477 NOTICE: Bulk processing took 59ms
Jul  3 04:36:01 wirenboard-AZAF2JDX authpriv.info CRON[4721]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:36:01 wirenboard-AZAF2JDX cron.info CRON[4725]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:36:06 wirenboard-AZAF2JDX authpriv.info CRON[4721]: pam_unix(cron:session): session closed for user root
Jul  3 04:36:19 wirenboard-AZAF2JDX auth.info sshd[4755]: rexec line 18: Deprecated option KeyRegenerationInterval
Jul  3 04:36:19 wirenboard-AZAF2JDX auth.info sshd[4755]: rexec line 19: Deprecated option ServerKeyBits
Jul  3 04:36:19 wirenboard-AZAF2JDX auth.info sshd[4755]: rexec line 30: Deprecated option RSAAuthentication
Jul  3 04:36:19 wirenboard-AZAF2JDX auth.info sshd[4755]: rexec line 37: Deprecated option RhostsRSAAuthentication
Jul  3 04:36:26 wirenboard-AZAF2JDX auth.info sshd[4755]: reprocess config line 30: Deprecated option RSAAuthentication
Jul  3 04:36:26 wirenboard-AZAF2JDX auth.info sshd[4755]: reprocess config line 37: Deprecated option RhostsRSAAuthentication
Jul  3 04:36:31 wirenboard-AZAF2JDX auth.info sshd[4755]: Accepted password for root from 192.168.3.102 port 50141 ssh2
Jul  3 04:36:31 wirenboard-AZAF2JDX authpriv.info sshd[4755]: pam_unix(sshd:session): session opened for user root by (uid=0)
Jul  3 04:36:31 wirenboard-AZAF2JDX auth.info sshd[4786]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory
Jul  3 04:36:31 wirenboard-AZAF2JDX auth.info sshd[4786]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory
Jul  3 04:37:01 wirenboard-AZAF2JDX authpriv.info CRON[4851]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:37:01 wirenboard-AZAF2JDX cron.info CRON[4855]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:37:05 wirenboard-AZAF2JDX authpriv.info CRON[4851]: pam_unix(cron:session): session closed for user root
Jul  3 04:37:36 wirenboard-AZAF2JDX user.notice wb-mqtt-db[640]: 2020-07-03 04:37:36.468 NOTICE: Bulk processing took 50ms
Jul  3 04:38:01 wirenboard-AZAF2JDX authpriv.info CRON[4955]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:38:01 wirenboard-AZAF2JDX cron.info CRON[4959]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:38:05 wirenboard-AZAF2JDX authpriv.info CRON[4955]: pam_unix(cron:session): session closed for user root
Jul  3 04:39:01 wirenboard-AZAF2JDX authpriv.info CRON[5042]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:39:01 wirenboard-AZAF2JDX cron.info CRON[5046]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:39:06 wirenboard-AZAF2JDX authpriv.info CRON[5042]: pam_unix(cron:session): session closed for user root
Jul  3 04:39:36 wirenboard-AZAF2JDX user.notice wb-mqtt-db[640]: 2020-07-03 04:39:36.466 NOTICE: Bulk processing took 48ms
Jul  3 04:40:01 wirenboard-AZAF2JDX authpriv.info CRON[5131]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:40:01 wirenboard-AZAF2JDX authpriv.info CRON[5130]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:40:01 wirenboard-AZAF2JDX cron.info CRON[5138]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_wbrules.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:40:01 wirenboard-AZAF2JDX cron.info CRON[5141]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:40:02 wirenboard-AZAF2JDX authpriv.info CRON[5131]: pam_unix(cron:session): session closed for user root
Jul  3 04:40:05 wirenboard-AZAF2JDX authpriv.info CRON[5130]: pam_unix(cron:session): session closed for user root
Jul  3 04:41:01 wirenboard-AZAF2JDX authpriv.info CRON[5249]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:41:01 wirenboard-AZAF2JDX cron.info CRON[5253]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:41:05 wirenboard-AZAF2JDX authpriv.info CRON[5249]: pam_unix(cron:session): session closed for user root
Jul  3 04:41:36 wirenboard-AZAF2JDX user.notice wb-mqtt-db[640]: 2020-07-03 04:41:36.456 NOTICE: Bulk processing took 38ms
Jul  3 04:42:02 wirenboard-AZAF2JDX authpriv.info CRON[5332]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:42:02 wirenboard-AZAF2JDX cron.info CRON[5336]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:42:06 wirenboard-AZAF2JDX authpriv.info CRON[5332]: pam_unix(cron:session): session closed for user root
Jul  3 04:43:01 wirenboard-AZAF2JDX authpriv.info CRON[5415]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:43:01 wirenboard-AZAF2JDX cron.info CRON[5419]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:43:05 wirenboard-AZAF2JDX authpriv.info CRON[5415]: pam_unix(cron:session): session closed for user root
Jul  3 04:43:36 wirenboard-AZAF2JDX user.notice wb-mqtt-db[640]: 2020-07-03 04:43:36.469 NOTICE: Bulk processing took 51ms
Jul  3 04:44:01 wirenboard-AZAF2JDX authpriv.info CRON[5510]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:44:01 wirenboard-AZAF2JDX cron.info CRON[5514]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:44:05 wirenboard-AZAF2JDX authpriv.info CRON[5510]: pam_unix(cron:session): session closed for user root
Jul  3 04:45:02 wirenboard-AZAF2JDX authpriv.info CRON[5609]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:45:02 wirenboard-AZAF2JDX authpriv.info CRON[5610]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:45:02 wirenboard-AZAF2JDX cron.info CRON[5618]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_wbrules.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:45:02 wirenboard-AZAF2JDX cron.info CRON[5619]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:45:03 wirenboard-AZAF2JDX authpriv.info CRON[5610]: pam_unix(cron:session): session closed for user root
Jul  3 04:45:06 wirenboard-AZAF2JDX authpriv.info CRON[5609]: pam_unix(cron:session): session closed for user root
Jul  3 04:45:35 wirenboard-AZAF2JDX authpriv.info sshd[4755]: pam_unix(sshd:session): session closed for user root
Jul  3 04:45:36 wirenboard-AZAF2JDX user.notice wb-mqtt-db[640]: 2020-07-03 04:45:36.555 NOTICE: Bulk processing took 137ms
Jul  3 04:46:01 wirenboard-AZAF2JDX authpriv.info CRON[5724]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:46:01 wirenboard-AZAF2JDX cron.info CRON[5728]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:46:05 wirenboard-AZAF2JDX authpriv.info CRON[5724]: pam_unix(cron:session): session closed for user root
Jul  3 04:46:28 wirenboard-AZAF2JDX daemon.info ntpd[2721]: 185.209.85.222 local addr 192.168.3.103 -> <null>
Jul  3 04:47:01 wirenboard-AZAF2JDX authpriv.info CRON[5799]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:47:01 wirenboard-AZAF2JDX cron.info CRON[5803]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
Jul  3 04:47:05 wirenboard-AZAF2JDX authpriv.info CRON[5799]: pam_unix(cron:session): session closed for user root
Jul  3 04:47:36 wirenboard-AZAF2JDX user.notice wb-mqtt-db[640]: 2020-07-03 04:47:36.473 NOTICE: Bulk processing took 55ms
Jul  3 04:48:01 wirenboard-AZAF2JDX authpriv.info CRON[5900]: pam_unix(cron:session): session opened for user root by (uid=0)
Jul  3 04:48:01 wirenboard-AZAF2JDX cron.info CRON[5904]: (root) CMD (/usr/share/wb-daemon-watchdogs/check_confed.sh 2>&1 | logger -t wb-daemon-watchdogs)
17

похоже, что перестают обновляться показания только от AI-DV-12 4-20мА, модули DO-R10A-8 и DI-WD-14 продолжают функционировать нормально, то есть их правило работает, за исключением частей, в которых используются значения AI-DV-12 4-20мА

defineRule("automatic_pump", {

    whenChanged: "wb-gpio/EXT2_IN1",

    then: function() {

        if (dev["wb-gpio"]["EXT2_IN1"] === false) {

            dev["wb-gpio"]["EXT3_R3A7"] = true;

            dev["wb-gpio"]["A1_OUT"] = true;

            dev["wb-gpio"]["A2_OUT"] = false;

        } else {

            dev["wb-gpio"]["EXT3_R3A7"] = false;

            dev["wb-gpio"]["A1_OUT"] = false;

            dev["wb-gpio"]["A2_OUT"] = true;

        }

    }

});

defineRule("automatic_vac_pump", {

    whenChanged: "virtval/AI07P",

    then: function() {

        if (dev["virtval"]["AI07P"] > -0.3) {

            dev["wb-gpio"]["EXT3_R3A8"] = true;

        } else {

            dev["wb-gpio"]["EXT3_R3A8"] = false;

        }

    }

});
18

AI-DV-12 подключен к контроллеру первым?

19

да, первым стоит, в коде можете видеть EXT1_Ax

20

Давайте его поменяем. Подозреваю что он неисправен. Написал в ЛС.