Полный лог при загрузке
U-Boot SPL 2017.03-1.2.0-gf92dee6f51 (Jun 02 2021 - 13:45:31)
DRAM init ok, rows:16, ncs:1, size: 1024MB
Trying to boot from MMC1
Warning - USDHC2 controller not supporting
U-Boot 2017.03-1.2.0-gf92dee6f51 (Jun 02 2021 - 13:45:31 +0000)
CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz)
CPU: Industrial temperature grade (-40C to 105C) at 29C
Reset cause: POR
Model: Wiren Board rev. 6.1 (i.MX6UL)
Board: Wiren Board MX6UL
DRAM: 1 GiB
MMC: FSL_SDHC: 0
Using default environment
In: serial
Out: serial
Err: serial
Net: eth0: ethernet@02188000
Hit any key to stop autoboot: 0
Checking if there is a USB storage with update file wb6_update.fit
dev: usb1_vbus @ regulator@0
starting USB…
USB0: USB EHCI 1.00
USB1: USB EHCI 1.00
scanning bus 0 for devices… 1 USB Device(s) found
scanning bus 1 for devices… EHCI timed out on TD - token=0x80008c80
unable to get device descriptor (error=-1)
1 USB Device(s) found
scanning usb for storage devices… 0 Storage Device(s) found
No storage devices, perhaps not 'usb start’ed…?
No USB update detected, continuing boot
switch to partitions #0, OK
mmc0(part 0) is current device
SD/MMC found on device 0
324 bytes read in 73 ms (3.9 KiB/s)
Importing environment from 0x82000000…
Checking if uenvcmd is set …
Running default loadzimage …
5126192 bytes read in 359 ms (13.6 MiB/s)
MMC read: dev # 0, block # 2016, count 32 … 32 blocks read: OK
Reading overlays list from eMMC
Reading factory fdt name from eMMC
Loading factory fdt imx6ul-wirenboard680
46446 bytes read in 101 ms (448.2 KiB/s)
485 bytes read in 157 ms (2.9 KiB/s)
Applying DT overlay wb6-nogsm
597 bytes read in 151 ms (2.9 KiB/s)
Applying DT overlay wb6-wifi-rtl8723bu
509 bytes read in 180 ms (2 KiB/s)
Applying DT overlay wb6-noradio
334 bytes read in 117 ms (2 KiB/s)
Applying DT overlay wb6-eth1
254 bytes read in 131 ms (1000 Bytes/s)
Applying DT overlay temp-industrial
Applying extra overlay
Booting from mmc …
Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Loading Device Tree to bef4b000, end bef6dfff … OK
Starting kernel …
U-Boot SPL 2017.03-1.2.0-gf92dee6f51 (Jun 02 2021 - 13:45:31)
DRAM init ok, rows:16, ncs:1, size: 1024MB
Trying to boot from MMC1
Warning - USDHC2 controller not supporting
U-Boot 2017.03-1.2.0-gf92dee6f51 (Jun 02 2021 - 13:45:31 +0000)
CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz)
CPU: Industrial temperature grade (-40C to 105C) at 30C
Reset cause: POR
Model: Wiren Board rev. 6.1 (i.MX6UL)
Board: Wiren Board MX6UL
DRAM: 1 GiB
MMC: FSL_SDHC: 0
Using default environment
In: serial
Out: serial
Err: serial
Net: eth0: ethernet@02188000
Hit any key to stop autoboot: 0
=> start usb
U-Boot SPL 2017.03-1.2.0-gf92dee6f51 (Jun 02 2021 - 13:45:31)
DRAM init ok, rows:16, ncs:1, size: 1024MB
Trying to boot from MMC1
Warning - USDHC2 controller not supporting
U-Boot 2017.03-1.2.0-gf92dee6f51 (Jun 02 2021 - 13:45:31 +0000)
CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz)
CPU: Industrial temperature grade (-40C to 105C) at 32C
Reset cause: POR
Model: Wiren Board rev. 6.1 (i.MX6UL)
Board: Wiren Board MX6UL
DRAM: 1 GiB
MMC: FSL_SDHC: 0
Using default environment
In: serial
Out: serial
Err: serial
Net: eth0: ethernet@02188000
Hit any key to stop autoboot: 0
Checking if there is a USB storage with update file wb6_update.fit
dev: usb1_vbus @ regulator@0
starting USB…
USB0: USB EHCI 1.00
USB1: USB EHCI 1.00
scanning bus 0 for devices… 2 USB Device(s) found
scanning bus 1 for devices… EHCI timed out on TD - token=0x80008c80
unable to get device descriptor (error=-1)
1 USB Device(s) found
scanning usb for storage devices… 1 Storage Device(s) found
Device 0: Vendor: Rev: PMAP Prod: USB Flash Memory
Type: Removable Hard Disk
Capacity: 14887.4 MB = 14.5 GB (30489408 x 512)
** Invalid partition 1 **
** Invalid partition 1 **
No USB update detected, continuing boot
switch to partitions #0, OK
mmc0(part 0) is current device
SD/MMC found on device 0
324 bytes read in 73 ms (3.9 KiB/s)
Importing environment from 0x82000000…
Checking if uenvcmd is set …
Running default loadzimage …
5126192 bytes read in 358 ms (13.7 MiB/s)
MMC read: dev # 0, block # 2016, count 32 … 32 blocks read: OK
Reading overlays list from eMMC
Reading factory fdt name from eMMC
Loading factory fdt imx6ul-wirenboard680
46446 bytes read in 101 ms (448.2 KiB/s)
485 bytes read in 157 ms (2.9 KiB/s)
Applying DT overlay wb6-nogsm
597 bytes read in 150 ms (2.9 KiB/s)
Applying DT overlay wb6-wifi-rtl8723bu
509 bytes read in 179 ms (2 KiB/s)
Applying DT overlay wb6-noradio
334 bytes read in 118 ms (2 KiB/s)
Applying DT overlay wb6-eth1
254 bytes read in 131 ms (1000 Bytes/s)
Applying DT overlay temp-industrial
Applying extra overlay
Booting from mmc …
Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Loading Device Tree to bef4b000, end bef6dfff … OK
Starting kernel …
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.22-wb2 (root@wbdevenv) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #2 SMP Thu Jun 24 14:46:55 UTC 2021
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: Wiren Board rev. 6.8.0 (i.MX6UL/ULL)
[ 0.000000] cma: Reserved 16 MiB at 0xbf000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] percpu: Embedded 14 pages/cpu @eefc7000 s25996 r8192 d23156 u57344
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840
[ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1011004K/1048576K available (6144K kernel code, 312K rwdata, 2220K rodata, 1024K init, 342K bss, 21188K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xb0000000 - 0xf0000000 (1024 MB)
[ 0.000000] modules : 0xaf000000 - 0xb0000000 ( 16 MB)
[ 0.000000] .text : 0xb0008000 - 0xb0700000 (7136 kB)
[ 0.000000] .init : 0xb0a00000 - 0xb0b00000 (1024 kB)
[ 0.000000] .data : 0xb0b00000 - 0xb0b4e140 ( 313 kB)
[ 0.000000] .bss : 0xb0b50000 - 0xb0ba5aec ( 343 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Switching to timer-based delay loop, resolution 41ns
[ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000055] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.002631] Console: colour dummy device 80x30
[ 0.002672] Calibrating delay loop (skipped), value calculated using timer frequency… 48.00 BogoMIPS (lpj=240000)
[ 0.002705] pid_max: default: 32768 minimum: 301
[ 0.002979] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003008] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004547] CPU: Testing write buffer coherency: ok
[ 0.005121] /cpus/cpu@0 missing clock-frequency property
[ 0.005162] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.005219] Setting up static identity map for 0x80100000 - 0x80100070
[ 0.007870] Brought up 1 CPUs
[ 0.007903] SMP: Total of 1 processors activated (48.00 BogoMIPS).
[ 0.007919] CPU: All CPU(s) started in SVC mode.
[ 0.009522] devtmpfs: initialized
[ 0.037392] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.038183] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.038233] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.039650] pinctrl core: initialized pinctrl subsystem
[ 0.042317] NET: Registered protocol family 16
[ 0.044237] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.047053] cpuidle: using governor menu
[ 0.082231] No ATAGs?
[ 0.082288] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.082311] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.084644] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[ 0.131127] mxs-dma 1804000.dma-apbh: initialized
[ 0.135986] SCSI subsystem initialized
[ 0.136635] usbcore: registered new interface driver usbfs
[ 0.136790] usbcore: registered new interface driver hub
[ 0.137054] usbcore: registered new device driver usb
[ 0.138779] i2c-gpio i2c_rtc: using pins 48 (SDA) and 49 (SCL)
[ 0.139693] i2c-gpio i2c_eeprom1: using pins 76 (SDA) and 67 (SCL)
[ 0.140630] i2c-gpio i2c_eeprom2: using pins 70 (SDA) and 71 (SCL)
[ 0.142272] i2c i2c-1: IMX I2C adapter registered
[ 0.142318] i2c i2c-1: can’t use DMA, using PIO instead.
[ 0.142659] Linux video capture interface: v2.00
[ 0.142820] pps_core: LinuxPPS API ver. 1 registered
[ 0.142839] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.142892] PTP clock support registered
[ 0.143649] Advanced Linux Sound Architecture Driver Initialized.
[ 0.146195] clocksource: Switched to clocksource mxc_timer1
[ 0.172085] NET: Registered protocol family 2
[ 0.173370] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.173580] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.173873] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.174024] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.174109] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.174454] NET: Registered protocol family 1
[ 0.175379] RPC: Registered named UNIX socket transport module.
[ 0.175413] RPC: Registered udp transport module.
[ 0.175429] RPC: Registered tcp transport module.
[ 0.175445] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.180455] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.200244] NFS: Registering the id_resolver key type
[ 0.200313] Key type id_resolver registered
[ 0.200331] Key type id_legacy registered
[ 0.211337] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.211371] io scheduler noop registered (default)
[ 0.211388] io scheduler deadline registered
[ 0.211467] io scheduler cfq registered
[ 0.218516] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
[ 0.218560] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
[ 0.228214] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 19, base_baud = 5000000) is a IMX
[ 0.807851] console [ttymxc0] enabled
[ 0.813505] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 56, base_baud = 5000000) is a IMX
[ 0.856872] imx_rngc 2284000.rngb: Freescale RNGC registered.
[ 0.862916] [drm] Initialized
[ 0.903219] brd: module loaded
[ 0.923133] loop: module loaded
[ 0.931397] at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write
[ 0.942855] at24 6-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write
[ 0.954556] spi_imx 2010000.ecspi: probed
[ 0.960316] libphy: Fixed MDIO Bus: probed
[ 0.967004] 20b4000.ethernet supply phy not found, using dummy regulator
[ 0.974964] pps pps0: new PPS source ptp0
[ 1.009265] libphy: fec_enet_mii_bus: probed
[ 1.014972] fec 20b4000.ethernet eth0: registered PHC device 0
[ 1.136292] 2188000.ethernet supply phy not found, using dummy regulator
[ 1.257329] pps pps1: new PPS source ptp1
[ 1.262609] libphy: fec_enet_mii_bus: probed
[ 1.270816] fec 2188000.ethernet eth1: registered PHC device 1
[ 1.277377] PPP generic driver version 2.4.2
[ 1.282234] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.288925] ehci-mxc: Freescale On-Chip EHCI Host driver
[ 1.294787] usbcore: registered new interface driver usb-storage
[ 1.301434] usbcore: registered new interface driver usbserial
[ 1.307598] usbcore: registered new interface driver usbserial_generic
[ 1.314266] usbserial: USB Serial support registered for generic
[ 1.321011] mousedev: PS/2 mouse device common for all mice
[ 1.372566] rtc rtc0: invalid alarm value: 2021-11-10 38:65:0
[ 1.379011] rtc-pcf8563 4-0051: rtc core: registered rtc-pcf8563 as rtc0
[ 1.395220] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1
[ 1.404359] i2c /dev entries driver
[ 1.418045] lm75 4-0048: hwmon0: sensor ‘lm75b’
[ 1.539054] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
[ 1.547366] sdhci: Secure Digital Host Controller Interface driver
[ 1.553590] sdhci: Copyright© Pierre Ossman
[ 1.558066] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.626269] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
[ 1.643174] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.669967] usbcore: registered new interface driver usbhid
[ 1.677734] usbhid: USB HID core driver
[ 1.703973] NET: Registered protocol family 10
[ 1.711338] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.719234] NET: Registered protocol family 17
[ 1.723914] Key type dns_resolver registered
[ 1.733399] Registering SWP/SWPB emulation handler
[ 1.740400] registered taskstats version 1
[ 1.761422] random: fast init done
[ 1.771186] mmc0: new DDR MMC card at address 0001
[ 1.778334] imx_thermal 2000000.aips-bus:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C
[ 1.789339] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB
[ 1.794349] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB
[ 1.813444] rtc-pcf8563 4-0051: setting system clock to 2021-10-26 12:13:10 UTC (1635250390)
[ 1.821944] of_cfs_init
[ 1.824527] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB
[ 1.831053] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB
[ 1.840178] of_cfs_init: OK
[ 1.848740] mmcblk0: p1 p2 p3 p4 < p5 p6 >
[ 1.853637] vdd3p0: disabling
[ 1.860473] vref-3v3: disabling
[ 1.863649] usb1_vbus: disabling
[ 1.867003] ALSA device list:
[ 1.869985] No soundcards found.
[ 1.874484] EXT4-fs (mmcblk0p2): couldn’t mount as ext3 due to feature incompatibilities
[ 1.883409] EXT4-fs (mmcblk0p2): couldn’t mount as ext2 due to feature incompatibilities
[ 1.893155] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 1.900590] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 2.735382] EXT4-fs (mmcblk0p2): recovery complete
[ 2.743318] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.751741] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 2.760202] devtmpfs: mounted
[ 2.768750] Freeing unused kernel memory: 1024K (b0a00000 - b0b00000)
[ 3.035005] ip_tables: © 2000-2006 Netfilter Core Team
[ 3.072971] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.092241] systemd[1]: Detected architecture arm.
Welcome to Debian GNU/Linux 9 (stretch)!
[ 3.127406] systemd[1]: Set hostname to .
[ 3.417444] systemd-sysv-generator[130]: [/etc/init.d/wb-mqtt-knx:6] Could not build name for facility $remote_fs,: Invalid argument
[ 3.755367] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 3.786957] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ 3.842966] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 3.877033] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 3.907228] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 3.938633] systemd[1]: Created slice System Slice.
[ OK ] Created slice System Slice.
[ 3.982681] systemd[1]: Mounting POSIX Message Queue File System…
Mounting POSIX Message Queue File System…
Mounting Debug File System…
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-getty.slice.
Mounting /sys/kernel/config…
[ OK ] Created slice system-systemd\x2dfsck.slice.
[ OK ] Created slice User and Session Slice.
[ OK ] Reached target Slices.
[ OK ] Reached target Remote File Systems.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on Journal Socket.
Starting Load Kernel Modules…
Starting Create list of required st…ce nodes for the current kernel…
Starting File System Check on Root Device…
[ OK ] Listening on Journal Socket (/dev/log).
Starting Journal Service…
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Mounted Debug File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted /sys/kernel/config.
[ OK ] Started Load Kernel Modules.
[ OK ] Started Create list of required sta…vice nodes for the current kernel.
[ OK ] Started File System Check on Root Device.
[ OK ] Started Journal Service.
[ OK ] Started File System Check Daemon to report status.
Starting Remount Root and Kernel File Systems…
Starting Create Static Device Nodes in /dev…
[ 4.933287] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
Starting Apply Kernel Variables…
[ OK ] Started Remount Root and Kernel File Systems.
Starting udev Coldplug all Devices…
Starting Load/Save Random Seed…
Starting prepare partitions at first boot…
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Load/Save Random Seed.
Starting udev Kernel Device Manager…
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started prepare partitions at first boot.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Started udev C[ 7.033771] Driver for 1-wire Dallas network protocol.
oldplug all Devices.
[ 7.050616] lirc_dev: IR Remote Control driver registered, major 245
[ 7.111523] lirc_pwm: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.205197] imx6ul-pinctrl 20e0000.iomuxc: pin MX6UL_PAD_LCD_DATA08 already requested by 20e0000.iomuxc; cannot claim for lirc-rfm69
[ 7.217321] imx6ul-pinctrl 20e0000.iomuxc: pin-78 (lirc-rfm69) status -22
[ 7.224127] imx6ul-pinctrl 20e0000.iomuxc: could not request pin 78 (MX6UL_PAD_LCD_DATA08) from group rfm69diogrp on device 20e0000.iomuxc
[ 7.236715] lirc_pwm lirc-rfm69: Error applying setting, reverse things back
[ OK ] Found device /dev/ttymxc0.
[ 7.453013] lirc_pwm: probe of lirc-rfm69 failed with error -22
[ 7.577302] fec 20b4000.ethernet rename2: renamed from eth0
[ 7.908109] fec 2188000.ethernet eth0: renamed from eth1
[ 7.949120] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 7.954099] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 7.961423] fec 20b4000.ethernet eth1: renamed from rename2
[ 8.086634] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 8.140955] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.147938] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.155174] usb usb1: Product: EHCI Host Controller
[ 8.160114] usb usb1: Manufacturer: Linux 4.9.22-wb2 ehci_hcd
[ 8.165870] usb usb1: SerialNumber: ci_hdrc.0
[ 8.449922] hub 1-0:1.0: USB hub found
[ 8.490100] hub 1-0:1.0: 1 port detected
[ 8.563459] 2184200.usb supply vbus not found, using dummy regulator
[ 8.649980] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 8.654952] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
[ 8.786623] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 8.792330] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.799267] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.806541] usb usb2: Product: EHCI Host Controller
[ 8.811428] usb usb2: Manufacturer: Linux 4.9.22-wb2 ehci_hcd
[ 8.817210] usb usb2: SerialNumber: ci_hdrc.1
[ 8.996372] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[ 9.012974] hub 2-0:1.0: USB hub found
[ OK ] Found device /[ 9.081344] hub 2-0:1.0: 1 port detected
dev/mmcblk0p5.
[ OK ] Found device /dev/mmcblk0p6.
[ 9.242109] usb 1-1: New USB device found, idVendor=0930, idProduct=6545
[ 9.248974] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.256206] usb 1-1: Product: USB Flash Memory
[ 9.260658] usb 1-1: Manufacturer:
[ 9.264848] usb 1-1: SerialNumber: 00187D1174B1ED91A00008D0
[ 9.463528] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 9.536624] scsi host0: usb-storage 1-1:1.0
Starting File System Check on /dev/mmcblk0p6…
Activating swap /dev/mmcblk0p5…
[ 9.706367] usb 2-1: new high-speed USB device number 2 using ci_hdrc
[ 9.753652] Adding 262140k swap on /dev/mmcblk0p5. Priority:-1 extents:1 across:262140k SS
[ OK ] Activated swap /dev/mmcblk0p5.
[ OK ] Reached target Swap.
[ 9.917006] usb 2-1: New USB device found, idVendor=0424, idProduct=2514
[ 9.923763] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9.948434] hub 2-1:1.0: USB hub found
[ 9.960000] hub 2-1:1.0: 4 ports detected
[ OK ] Started File System Check on /dev/mmcblk0p6.
Mounting /mnt/data…
[ 10.190837] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[ OK ] Mounted /mnt/data.
Mounting /var/log…
[ 10.286321] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc
[ OK ] Mounted /var/log.
[ OK ] Reached target Local File Systems.
Starting prepare mounts and symlinks to config files…
Starting Flush Journal to Persistent Storage…
[ 10.450286] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
[ 10.457380] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 10.464754] usb 2-1.1: Product: 802.11n WLAN Adapter
[ 10.469803] usb 2-1.1: Manufacturer: Realtek
[ 10.474091] usb 2-1.1: SerialNumber: 00e04c000001
[ 10.595656] systemd-journald[149]: Received request to flush runtime journal from PID 1
[ 10.651660] systemd-journald[149]: File /var/log/journal/74f09575e0cb77ba5ea7e9286086ac7a/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 10.666680] scsi 0:0:0:0: Direct-Access USB Flash Memory PMAP PQ: 0 ANSI: 4
[ 10.742354] Bluetooth: Core ver 2.22
[ 10.746049] NET: Registered protocol family 31
[ 10.750653] Bluetooth: HCI device and connection manager initialized
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ 10.868219] Bluetooth: HCI socket layer initialized
[ 10.896493] Bluetooth: L2CAP socket layer initialized
[ 10.924558] Bluetooth: SCO socket layer initialized
[ 11.010123] usbcore: registered new interface driver btusb
[ 11.022987] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 11.031799] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[ 11.040197] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 11.049509] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin
[ 11.056048] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 11.068058] Bluetooth: hci0: rom_version status=0 version=1
[ 11.073717] Bluetooth: cfg_sz 0, total size 22496
Starting Load/Save RF Kill Switch Status…
[ OK ] Started Load/Save RF Kill Switch Status.
[ OK ] Started Flush Journal to Persistent Storage.
[ 11.643565] 8723bu: module is from the staging directory, the quality is unknown, you have been warned.
[ 11.724436] RTL871X: module init start
[ 11.728374] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40
[ 11.735347] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40
[ 11.993765] RTL871X: rtw_ndev_init(wlan0)
[ 12.008224] RTL871X: rtw_ndev_init(wlan1)
[ 12.043457] usbcore: registered new interface driver rtl8723bu
[ 12.049510] RTL871X: module init ret=0
[ 12.121313] usbcore: registered new interface driver rtl8xxxu
[ 12.129648] sd 0:0:0:0: [sda] 30489408 512-byte logical blocks: (15.6 GB/14.5 GiB)
[ 12.171009] sd 0:0:0:0: [sda] Write Protect is off
[ 12.208540] sd 0:0:0:0: [sda] No Caching mode page found
[ 12.213886] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 12.332406] sda: sda4
[ 12.356504] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ OK ] Found device 802.11n_WLAN_Adapter.
[ OK ] Started prepare mounts and symlinks to config files.
Starting Create Volatile Files and Directories…
[ OK ] Started ifup for wlan0.
[ OK ] Started Create Volatile Files and Directories.
[ OK ] Reached target System Time Synchronized.
Starting Update UTMP about System Boot/Shutdown…
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Reached target System Initialization.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Started Daily apt download activities.
[ OK ] Started Monitor directories with device templates for wb-mqtt-serial.
[ OK ] Reached target Paths.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Listening on KNX Daemon (socket).
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Reached target Timers.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Wiren Board MQTT to OPC UA gateway…
[ OK ] Started Generates wb-mqtt-serial UI schema for wb-mqtt-confed.
[ OK ] Started watch config files.
[ OK ] Started D-Bus System Message Bus.
[ OK ] Started Cgroup management daemon.
Starting LSB: Hardware configuration with Device Tree overlays…
[ 14.343736] RTL871X: RTW_ADAPTIVITY_EN_[ 14.347559] AUTO, chplan:0x20, Regulation:3,3
[ 14.351931] RTL871X: RTW_ADAPTIVITY_MODE_[ 14.355788] NORMAL
Starting Mosquitto MQTT v3.1/v3.1.1 Broker…
[ 14.407510] cgroup: new mount options do not match the existing superblock, will be ignored
Starting Bluetooth service…
Starting Wiren Board MQTT to Modbus TCP gateway…
Starting System Logging Service…
Starting Avahi mDNS/DNS-SD Stack…
Starting Restore /etc/resolv.conf i…fore the ppp link was shut down…
Starting initialize filesystems at first boot…
[ OK ] Started Regular background program processing daemon.
Starting Login Service…
[ OK ] Started System Logging Service.
[ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down.
[ 15.360654] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.366044] Bluetooth: BNEP filters: protocol multicast
[ 15.436713] Bluetooth: BNEP socket layer initialized
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started Bluetooth service.
[ OK ] Started Login Service.
Starting Hostname Service…
[ OK ] Reached target Bluetooth.
[ OK ] Started initialize filesystems at first boot.
[ 16.671340] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ OK ] Started Mosquitto MQTT v3.1/v3.1.1 Broker.
Starting LSB: Configuration Editor Backend…
Starting LSB: Firmware update monitor…
[ OK ] Started Wiren Board MQTT to OPC UA gateway.
[ OK ] Started Hostname Service.
[ OK ] Started LSB: Configuration Editor Backend.
[ OK ] Started LSB: Firmware update monitor.
[ 18.357761] random: crng init done
[ 18.728790] RTL871X: nolinked power save enter
[ OK ] Started Wiren Board MQTT to Modbus TCP gateway.
[ 21.065895] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 218, base_baud = 5000000) is a IMX
[ OK ] Started LSB: Hardware configuration with Device Tree overlays.
Starting LSB: initscript to use GSM modem integrated RTC…
[ OK ] Started MQTT Rule engine for Wiren Board.
[ OK ] Started LSB: initscript to use GSM modem integrated RTC.
Starting Raise network interfaces…
[ OK ] Started Raise network interfaces.
[ OK ] Reached target Network.
Starting Permit User Sessions…
Starting KNX Daemon…
[ OK ] Started Kernel 1-Wire MQTT driver for WB-HomA.
Starting OpenBSD Secure Shell server…
Starting A high performance web server and a reverse proxy server…
[ OK ] Started MQTT Driver for serial devices.
Starting MQTT Driver for GPIO-controlled switches…
Starting MQTT Driver for ADC…
Starting dnsmasq - A lightweight DHCP and caching DNS server…
[ OK ] Started Wiren Board database logger.
[ OK ] Started KNX Daemon.
[ OK ] Started Permit User Sessions.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttymxc0.
[ OK ] Reached target Login Prompts.
[ OK ] Reached target Network is Online.
Starting LSB: Advanced IEEE 802.11 management daemon…
Starting LSB: Start NTP daemon…
Starting LSB: Brings up/down network automatically…
Starting LSB: : Wiren Board MQTT KNX bridge…
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Started LSB: Start NTP daemon.
[ OK ] Started LSB: : Wiren Board MQTT KNX bridge.
Debian GNU/Linux 9 wirenboard-AWEUBZFJ ttymxc0
wirenboard-AWEUBZFJ login: [ 34.417099] RTL871X: RTW_ADAPTIVITY_EN_[ 34.420793] AUTO, chplan:0x20, Regulation:3,3
[ 34.425194] RTL871X: RTW_ADAPTIVITY_MODE_[ 34.429171] NORMAL
[ 39.262295] RTL871X: nolinked power save leave
[ 39.876769] SMSC LAN8710/LAN8720 2188000.ethernet:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
[ 40.073200] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 40.402159] RTL871X: assoc success
[ 40.408092] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 40.667218] Micrel KSZ8081 or KSZ8091 2188000.ethernet:03: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet:03, irq=-1)
[ 40.945051] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 42.567210] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
[ 42.574925] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready